23-8-07
CR40
Compact 3 Speed Turntable
23-8-07
910-272100-001
Download from Www.Somanuals.com. All Manuals Search And Download.
Basic Operation
Getting Started
Unpacking
Turntable Operation
Power Source
Accessory: ADAPTER FOR 45 RPM
1
2
Turn the unit on by rotating the ON-OFF
VOLUME SWITCH (3) located on the front
panel to the ON position.
To play 45 RPM records, you will need to use the
supplied adapter.
1
Remove packing materials from unit.
Note: Save all packing materials.
Unwind the power adaptor (Located in a white box
inside the packaging foam). First connect the small
end of the adaptor to the back of the turntable, then
the other end to an AC power outlet
Release TONE ARM (9) from the ARM LOCK (12)
and place it on the ARM REST (11).
2
3
Carefully remove unit from its styrofoam and
take it out of the plastic bag.
Important: The ARM LOCK (12) is taller than
the turntable and needs to be folded
down to allow larger records to be
played.
Remove the white protective needle cover by
gently pulling towards front of unit.
1
2
3
Place the 45 RPM ADAPTER (8) over the
SPINDLE (14).
3
4
Set the SPEED CONTROL SWITCH (10) to
the correct speed (33 1/3, 45 or 78rpm) for the
selected record.
Gently place your 45 RPM record onto the
turntable.
POWER ADAPTOR(7)
Lift the TONE ARM (9) by hand to the record
and slowly lower it to the desired starting point.
The turntable will start to turn automatically. At
the end of the record, the tone arm must be
returned to the ARM REST (11) by hand.
Follow the steps under turntable operation to
play your record.
5
Adjust the volume to the desired listening level.
NOTE:After use and before closing the lid, always
place the TONE ARM (9) back on the ARM
LOCK (12).
7
4
Download from Www.Somanuals.com. All Manuals Search And Download.
IMPORTANT SAFETY INSTRUCTION
PLEASE READ CAREFULLY ALL THE FOLLOWING IMPORTANT SAFEGUARDS
THAT ARE APPLICABLE TO YOUR EQUIPMENT
1. Read Instructions - All the safety and operating instructions should be read before the product is operated.
2. Retain instructions - The safety and operating instructions should be retained for future reference.
3. Heed Warnings - All warnings on the product and in the operating Instructions should be adhered to.
4. Follow Instructions - All operating and use instructions should be followed.
5. Cleaning - Unplug this product from the wall outlet before cleaning. Do not use liquid cleaners or aerosol cleaners. Use
a damp cloth for cleaning.
6. Attachments - Do not use attachments not recommended by the product manufacturer as they may cause hazards.
7. Water and Moisture - Do not use this product near water - for example, near a bath tub, wash bowl, kitchen sink, or
laundry tub; in a wet basement; or near a swimming pool; and the like.
8. A product and cart combination should be moved with care. Quick stops, excessive force, and uneven
surfaces may cause the product and cart combination to overturn.
9. Ventilation - Slots and openings in the cabinet are provided for ventilation and to ensure reliable
operation of the product and to protect it from overheating, and these openings must not be blocked
or covered, The openings should never be blocked by placing the product on a bed, sofa, rug, or
other similar surface. This product should not be placed in a built - in installation such as a bookcase
or rack unless proper ventilation is provided or the manufacturer's instructions have been adhered to.
10. Power Sources - This product should be operated only from the type of power source indicated on the marking label,
if you are not sure of the type of power supply to your home. Consult your product dealer or local power company. For
products intended to operate from battery power, or other sources, refer to the operating instructions.
11. Grounding or Polarization - This product may be equipped with a polarized alternating-current line plug (a plug having
one blade wider than the other). This plug will fit into the power outlet only one way. This is a safety feature. If you
are unable to insert the plug fully into the outlet try reversing the plug, If the plug should still fail to fit, contact your
electrician to replace your obsolete outlet. Do not defeat the safety purpose of the polarized plug.
12. Power - Cord Protection - Power - supply cords should be routed so that they are not likely to
be walked on or pinched by items placed upon or against them, paying particular attention to
cords at plugs, convenience receptacles, and the point where they exit from the product.
AC
13. Lightning - For added protection for this product during a lightning storm, or when it is left
Polarized Plug
unattended and unused for long periods of time, unplug it from the wall outlet and disconnect
the antenna or cable system. This will prevent damage to the product due to lightning and power - line surges.
14. Power Lines - An outside antenna system should not be located in the vicinity of overhead power lines or other electric
light or power circuits, or where it can fall into such power lines or circuits. When installing an outside antenna system,
extreme care should be taken to keep from touching such power lines or circuits as contact with them might be fatal.
15. Overloading - Do not overload wall outlets, extension cords, or integral convenience receptacles as this can result
in a risk of fire or electric shock.
16. Object and Liquid Entry - Never push objects of any kind into this product through openings as they may touch
dangerous voltage points or short - out parts that could result in a fire or electric shock. Never spill liquid of any kind
on the product.
17. Servicing - Do not attempt to service this product yourself as opening or removing covers may expose you to dangerous
voltage or other hazards. Refer all servicing to qualified service personnel.
18. Damage Requiring Service - Unplug this product from the wall outlet and refer servicing to qualified service personnel
under the following conditions;
a. When the power-supply cord or plug is damaged.
.
If liquid has been spilled, or objects have fallen into the product.
c. If the product has been exposed to rain or water.
d. If the product does not operate normally by following the operating instructions. Adjust only those controls that
are covered by the operating instructions as an improper adjustment of other controls may result in damage and
will often require extensive work by a qualified technician to restore the product to its normal operation.
e. If the product has been dropped or damaged in any way.
f. When the product exhibits a distinct change in performance - this indicates a need for service.
19. Replacement Parts - When replacement parts are required, be sure the service technician has used replacement
parts specified by the manufacturer or have the same characteristics as the original part. Unauthorized substitutions
may result in fire, electric shock, or other hazards.
20. Safety Check - Upon completion of any service or repairs to this product, ask the service technician to perform safety
checks to determine that the product is in proper operating condition.
21. Wall or ceiling Mounting - The product should be mounted to a wall or ceiling only as recommended by the manufacturer.
22. Heat - The product should be situated away from heat sources such as radiators. Heat registers, stoves, or other
products (including amplifiers) that produce heat.
WARNING: Changes or modifications to this unit not expressly approved by the party responsible for compliance could
void the user’s authority to operate the equipment.
NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part
15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential
installation. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in
accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee
that interference will not occur in a particular installation. If this equipment does cause harmful intereference to radio or
television reception, which can be determined by turning the equipment off and on , the user is encouraged to try to correct
the interference by one or more of the following measures:
-
-
-
-
Reorient or relocate the receiving antenna.
Increase the separation between the equipment and receiver.
Connect the equipment into an circuit different from that to which the receiver is connected.
Consult the dealer or an experienced radio TV technician for help.
Download from Www.Somanuals.com. All Manuals Search And Download.
Connecting Optional Equipment
Welcome
Table of Contents
Thank you for purchasing the Crosley Compact 3
Speed Turntable (CR40). Before operating this unit,
please read this manual thoroughly and retain it for
future reference.
Getting Started
Line Out
Troubleshooting
Unpacking................................. 4
Power Source........................... 4
Control Locators....................... 5,6
To use your turntable as an audio output device that
can be hooked up to an existing stereo system,
follow the steps below.
There is no Power
1
The AC adaptor is not connected to either a
power outlet or unit.
About This Manual
1
2
Plug Auxiliary cable into the LINE OUT JACK(5)
on the back of your unit.
Basic Operation
2
The unit is not turned ON : Rotate the ON-OFF
SWITCH from the OFF position.
Instructions in this manual describe the control
functions of the CR40.
Turntable Operation.................. 7
Plug the other end of the Auxililary cable into
the input jack on your desired external
component.
Accessory: Adapter for 45 rpm
.................................................. 7
Turntable will not work
1
The white protective needle cover was not
removed.
3
4
Check the volume level of your external
component.
Connecting Optional Equipment
Line Out .................................. 8
Subwoofer Output Jack .......... 8
General
2
Adjust the Volume Control knob.
See operators manual for correct operation of
the external component.
Troubleshooting Guide............ 8
Subwoofer Output Jack
Warranty................................... 9
The subwoofer output jack enables you to attach a
subwoofer (not supplied) which will enhance bass
response. Please contact your retailer for suitable
subwoofer models.
3
8
Download from Www.Somanuals.com. All Manuals Search And Download.
Getting started
Getting started
1
Unit Controls
Unit Controls
1. SPEAKERS
2. TONE
8. ADAPTER FOR 45 rpm RECORDS
9. TONE ARM
10. SPEED CONTROL SWITCH
(33 1/3, 45, 78 rpm)
11. ARM REST
12. FOLDING ARM LOCK
13. TURNTABLE
13
14
8
9
3. ON-OFF SWITCH / VOLUME CONTROL
4. SUBWOOFER OUTPUT JACK
5. LINE OUT JACK
6. 9V DC ADAPTOR JACK
7. POWER ADAPTOR
14. SPINDLE
2
3
12 11
10
4
6
5
7
5
6
Download from Www.Somanuals.com. All Manuals Search And Download.
|