Notebook Travel Speaker
User Manual
0
Download from Www.Somanuals.com. All Manuals Search And Download.
1.Introduction USB 2/2.1 Channel Speakers
This USB 2/2.1 channel Speakers is design for all kind of PC base products. It is USB
2.0 full speed compatible and utilizes USB bus power. No driver is needed for audio
playback on all mainstream OSs; therefore this device provides a truly plug-and-play
feature for external digital audio play back. Better yet, simply install Xear 3D Sound
USB audio driver, users can avail themselves of a much better virtual 5.1 CH
environment capable. Via 3 dimensional audio conversions of this technology,
Personalized and optimum 5.1 CH listening environment and experience is achieved.
Advantage of USB 2Ch Speakers:
¾Easy to replace “entry level” sound card solutions.
¾No more limitations on analog signal cable line.
¾Utilize USB bus power, no external adapter required.
¾All in one design, saving weight and easy to carry on.
¾Plug and play for any PC System reach maximum compatibility.
¾Digital audio sound solution fit next generation multi-media trend.
¾Greater than +100db SNR (Idle status) ensure “hiss-free” and high audio fidelity.
¾No problem on FCC test.
¾Getting world’s first USB 2 /2.1CH speaker, capable of providing virtual yet immersive
5.1 CH 3D surround sound.
¾More price competitive than other USB audio solutions of its kind.
¾User friendly and adjustable GUI for a tailor made listening environment.
¾Adjustable EQ(equalizer), compensating the inefficiency of the conventional
speakers.
¾Support +22db audio gain control to loudness output sound.
2
Download from Www.Somanuals.com. All Manuals Search And Download.
2.System Requirement and Installation
This device must be applied on USB specification products. And user should to confirm
that PC operation supports USB function, USB 1.1 or 2.0.
No external driver installed：
¾OS Support ：Win98SE, WinME, Win2000, WinXP, Mac OS 9.0 and 10.1
¾System recommended：use Intel PII 350 MHz or AMD K6 450 above
¾At least 64 MB RAM (Win98SE) or 128MB RAM (WinME, Win2000 and WinXP)
¾For good sound quality, please adjust your system’s H/W acceleration and Sample
rate conversion quality to Full and Best.
Note: Some USB Host Controller may have problem with data stream package loss,
this will influence output audio data and make some discontinuous sound. But
this is very rare.
Sometime, when user plug USB speaker on PC system and OS cannot auto
change audio device to USB audio, please switch the audio device to USB
audio sound and audio devices properties in control panel.
3
Download from Www.Somanuals.com. All Manuals Search And Download.
Install Xear 3D sound audio driver：
¾OS Support ：Win98SE, WinME, Win2000, WinXP
¾System recommended：use Intel PII 350 MHz or AMD K6 450 above
¾At least 64 MB RAM (Win98SE) or 128MB RAM (WinME, Win2000 and WinXP)
¾Support Direct sound 3D
Note: Windows OS has default USB driver support, but no support for HRTF 3D, EAX
or Virtual 5.1 CH sound effect. Thus, if user wants to enjoy these fancy
experiences must install C-Media Xear 3D sound audio driver.
Before users install C-Media Xear 3D sound audio driver, they must make sure
that USB Speakers have connected to PC system already.
If your PC system has more than one USB connect port, please remember
which one is connected for install, and next time when you plug USB speaker
to PC, you have to plug the same port for initialize the Xear 3D driver.
4
Download from Www.Somanuals.com. All Manuals Search And Download.
Xear 3D Sound Audio Driver Installation Step：
nTurn on PC system and connect USB speaker to PC system.
oPlease follow up the set up procedure and click “Next ” button to continue
installation.
5
Download from Www.Somanuals.com. All Manuals Search And Download.
pYou can Select install driver only or both driver and demo program then click “Next”
to continue installation.
qIf your System is WinXP, you may see a dialog box asking you about windows logo
issue, please click “Continue Anyway” to complete installation. And set up program
will continue install.
6
Download from Www.Somanuals.com. All Manuals Search And Download.
rWhen set up program complete installation system will need to restart to initialize
the driver.
sIf your PC system has more than one USB port, you can just plug USB speaker to
any USB port. If this connect is right that driver will detect device and show a task
bar on the bottom right side of the screen to guiding you which port is correct.
7
Download from Www.Somanuals.com. All Manuals Search And Download.
Best Listening Environment Setting
8
Download from Www.Somanuals.com. All Manuals Search And Download.
3. User Interface and Function Control
You can open “control panel” to find Xear 3D audio driver and enable it. Or, you can
check the bottom right side of the screen to double click Xear 3D task bar button.
9
Download from Www.Somanuals.com. All Manuals Search And Download.
AGC Function Select
Output Device Select
Click Speaker graphic to
test speaker sound
Master Volume Control
Click button for Auto
Test and stop
PS：Xear 3D supports loudness function which allows users to amplify the sound
source. This special feature can make speaker sound louder beyond its
limitation.
For technical support, to
know about Hardware
and Software information
10
Download from Www.Somanuals.com. All Manuals Search And Download.
Environment Sound Effects
Room Size
5.1 Virtual Speakers
Total Volume
Rotate Speakers
10 Band Equalizer
Reset Virtual Speakers
11
Download from Www.Somanuals.com. All Manuals Search And Download.
5.1 Virtual SPEAKER SHIFTER- Function Description
#
Function
Function Description
The SPEAKER SHIFTER block provides an advanced, amazing and
considerate feature- dynamically adjustable multi-channel sound system no
matter what listening appliance you use and what application you are
running. You do NOT have to endure unbalanced speaker placement due to
spatial limitation. You can enjoy multi-channel surround sound with even a pair
of earphones or usual 2 speakers. Besides, this block will show a reference
figure for Environment Size settings that will be described in the following text.
This block provides 27 Environment Effects, 3 Environment Sizes and 10-band
pre-set Equalizer.
5.1 Virtual
SPEAKER
SHIFTER Block
1
2
3
4
5
Sound Effect Block
Title Bar and
It’s the program title bar and will show version information if you put your cursor
Version Information on the bar for a while..
Virtual SPEAKER SHIFTER ON/OFF switch. Just click ON/OFF button to turn it
SHIFTER ON/OFF
Listener
on or off.
This is a top view. Listener’s head is a relative position reference for virtual
speakers.
There’re 6 Virtual Speakers here and they show a typical 5.1 surround sound
environment. Every Virtual Speaker represents the positioning of a channel
sound signal to the physical speaker. It allows you to shift the signals
instead of the speakers whenever you want to adjust the sound field. In
addition to the angle change, the sound will decay with the distance
between the listener and the speaker. You can see the correspondent
volume value in decibels (dB) in the “Volume Scale Display” at the bottom.
Please note that if you choose different Environment Sizes, the speakers will
enlarge (in Small size) or narrow (in Large size) to express the relative space
change.
6
5.1 Virtual Speakers
When SHIFTER is turned OFF, the Virtual Speakers will be in gray status. When
SHIFTER is turned ON, the Virtual Speakers will be turned into blue. The
following are the steps to use the Virtual SPEAKER SHIFTER:
Step 1: Run any audio applications (DVD, VCD, Games, MP3, CD….)
Step 2: Turn On SHFTER
OFF
ON
7
5.1 Virtual Speakers
Step 3: Click and drag the virtual speaker to anywhere you want for most
comfortable sound field
Note:
Front-Left, Front-Right, Rear-Left, Rear-Right and
Center virtual speakers can be moved to anywhere.
Center is usually for dialog in DVD and can be
adjusted from now on. Subwoofer signal is usually
directionless low-frequency sound to human ears.
Therefore, just keep it in horizontal to express gain
or decay.
12
Download from Www.Somanuals.com. All Manuals Search And Download.
# Function
Function Description
When SHIFTER is turned ON, though the Virtual Speakers will all be turned into blue,
it doesn’t imply all virtual speaker will take effect anytime. It depends on the
sound source format and the application program. The virtual speaker won’t
take effect if that channel has no digital audio. Please refer to the table indicating
effective virtual speakers below:
Sound Source
AP
Speaker Type
2CH
5.1-channel 2D WinDVD / PowerDVD
Sound (DVD) (Select 5.1 speakers)
All Effective
2-channel
Stereo 2D
Sound (MP3,
CD)
2-channel
Stereo 2D
Sound (MP3,
CD)
DirectSound Interface (like Media FL, FR
Player, C-Media Media Rack)
5.1 Virtual
Speakers
8
MCI Interface (Winamp old
versions before 3.0 )
FL, FR
FL, FR
3D Sound
Games
Note: 1. Center speaker is usually for dialog in the movies. When playing stereo
music, we do not mix stereo music into center channel currently in fear of
damage to the stereo directionality.
2. For MCI application program like Winamp, it just can deliver 2-channel stereo
sound even you set 6CH. It’s only proper for the driver to enhance Bass sound
which is directionless.
3. 3D Sound is currently positioned by HRTF 3D Engine at maximum 5
speakers.
13
Download from Www.Somanuals.com. All Manuals Search And Download.
4.Feature Overview of Xear 3D Sound Technology
The 1st Advantage of Xear 3D™ Sound Technology: Virtual 5.1CH Audio
SPEAKER SHIFTER allows the users to obtain a 5.1CH virtual speaker environment
no matter what output device they are using (2/2.1CH speakers). Moreover, the users
are able to drag the virtual speakers to anywhere they want without moving the actual
ones to accommodate their need. Therefore, by dragging a specific virtual speaker
shown on the GUI to the preferred position, enhanced individual channel output is
feasible. This revolutionary technology is welcome by those who always complain
about the not-loud-enough volume of the center (for dialog) or bass output in DVD.
With Xear 3D™ SPEAKER SHIFTER, no more low-volume center and/or bass output
problems.
To remedy this, C-Media provides the patented Xear 3D™ filter, capable of providing
virtual 5.1CH audio by means of a pair of speakers (2/2.1CH speakers to output
virtual 5.1CH).
Xear 3D™ SPEAKER SHIFTER allows users to obtain comprehensive 5.1CH audio even
though they are actually using 2/2.1CH speakers.
14
Download from Www.Somanuals.com. All Manuals Search And Download.
The 2nd Advantages of Xear 3D™ Sound Technology: Environment FX™ and
3D Positional Audio
In the real world sounds travel directionally; furthermore, sounds would have myriad
manifestations according to different factors of the environment: the room size,
distance, reflecting materials, obstructing objects, etc. For example, same footsteps
in different settings, say the cave and the sewer pipe, will generate distinctive effects
to the ears. In that regard, besides eye perception, sound cues also play an important
role in helping people tell the changes of the surroundings.
Regarding 3D VR(Virtual Reality) implementation, not only actual 3D visual images
are concerned, but what people would hear in the real world is count as well. One of
the major 3D VR implementations is 3D gaming for PC. When a command for 3D
audio is given, Microsoft operation system would provide DirectSound3D, an interface
conversion technology, to function as the bridge interfacing the upper application
program and lower audio device. Even so, it should be noted that only when the
lower audio device has 3D engine could the upper application program activate 3D
effects. Hence, if audio device does not provide 3D engine, no real-time audio effect
conversion (sound effects in different settings) is feasible. The gaming effect is thus
seriously destroyed.
As previously explained, in the process of real-time simulation of visual and acoustic
elements, powerful HRTF 3D engine and EnvironmentFX™ are a must. Xear 3D™
Engine excels all other solutions in that Xear 3D™ Engine supports powerful
HRTF(Head Related Transfer Function) 3D audio and real-time EnvironmentFX™,
exhibiting comprehensive and supreme environmental audio effects. When Xear
3D™ Engine is utilized, game players can instantly perceive different sound effect
when the setting is changed. No more confusion in directions.
15
Download from Www.Somanuals.com. All Manuals Search And Download.
5.Product Application
The user manual is a guide for users to understand how to use the new generation USB
Speaker with exclusive Xear 3DTM sound technology. With this manual, users can
quickly take advantage of these great features to enjoy amazing sound effects even
better than consumer electronics devices.
Xear 3D™ Sound Technology is a unique and innovative total audio solution . This
patented 3D sound technology not only supports real-time 3D gaming and
industry-standard 5.1CH DVD, but also offers an immersive virtual 5.1CH sound field to
the users regardless of what type of output device is actually utilized. Thanks to Xear
3D™ Sound Technology, even if users are using a pair of earphones or 2/2.1CH
speakers, still they can avail themselves of a much better virtual 5.1CH environment
capable only by Xear 3D™ Sound Technology. Better yet, all audio formats can be
converted to thrilling 3-dimensional audio by this technology. Personalized and
optimum 5.1CH listening environment and experience is thus achieved.
- Support EAX2.0TM or A3D1.0TM
- Support DS3DTM H/W &S/W
- C-Media SPEAKER SHIFTER
Interactive
Games
Applications
- SPEAKER SHIFTER
- 2-Speaker Virtual Theater
- Enhanced 5.1 Home Theater
Non-Interactive
Applications
DVD Movies
(Dolby Digital/DTS)
- Environment Effects
- Environment Sizes
- 10-Band Equalizer
Music
(MP3/CD)
16
Download from Www.Somanuals.com. All Manuals Search And Download.
7. FAQ & Technical Support
Q1：Why play CD without sound ?
Most general case was digital CD playback function did not open. Because USB
audio is digital signal, it is use different path to process CD music with traditional
analog CD.
You should open “Device Manager”, select “DVD/CD ROM drives” and open it.
Then switch to “properties” page and enable digital CD audio.
Q2：Why sometimes Win98SE and WinME can not auto detect USB audio device
and switch?
Since Win98SE and Win ME have different driver architecture with Win2000 and
WinXP. When users plug in/out USB audio device too much time or faster, these
two OSs may not detect the change on device. So, sometimes user got to switch
audio device to USB audio device by them self.
While user plug in USB audio device on Win98SE and WinME system, if system
cannot switch audio device to USB, please open “Control Panel”, select “Sounds
17
Download from Www.Somanuals.com. All Manuals Search And Download.
and Audio Devices”, choice “Audio” page then switch “Default device” to USB
Device or C-Media USB Device.
Q3：When using software application program (Like: Media player, Winamp,
PowerDVD, WinDVD….) to playback any media files, can I plug out USB
audio device while playing?
It is incorrect mode of operations, because while application programs were
playing audio stream, windows system is stilling using audio device to process
and deliver data real-time. So, when user plug out USB audio device windows
system can not delivering audio data to the same device, so that system will be
confused and make application programs failure or system crash.
The right way to plug out USB Audio device was stop playback function first.
Especially when your Windows system was Win98SE or WinME, this corrected
operation will keep stability of working system. Otherwise, uncorrected plug out
will cause application program or system crash.
18
Download from Www.Somanuals.com. All Manuals Search And Download.
Do not plug out while application programs were playing media files. Please
stop playback before plug out USB audio device.
Q4：Xear 3D Sound technology provide amazing function In virtual 5.1 speaker
shifter, how to using this function in different media format?
Virtual 5.1 Speaker shifter can process 2CH, 4CH or 5.1CH audio format and
make 2CH audio file like MP3, stereo wave to transfer in virtual 5.1 surround
sound. However, the most perfect application is playing 5.1CH DVD content like
Dolby digital AC-3 and DTS. User can using physical 2/2.1CH device (earphone,
speaker) to enjoyed dynamic 5.1CH surround sound by moving graphic user
interface.
In general, when user buy a new computer usually got a free bundle software
DVD player like PowerDVD or WinDVD. Most of these free bundle software
version only provide 2CH DVD audio playback capability that because 5.1CH
decoding was more expensive. So that, when user playback real 5.1CH DVD
content it can not processing different 6 channel audio source to spread out
characteristic with each channel. If user wants to enjoy real 5.1CH DVD
surround sound, you can buy a software DVD player with Dolby digital AC-3 or
DTS 5.1CH decoding function.
※ User can check software DVD player to confirm what decoding version that
DVD software player supported.
1. Open Software DVD Player
2. Click display windows
19
Download from Www.Somanuals.com. All Manuals Search And Download.
3. Click right key of mouse
4. Select “Configuration” or “Setup”
5. Choice “Audio” function setting page
6. Check “Audio Output”→If you can see or select speaker from 2 to 6 that
mean this version was supported 5.1CH decoding capability. Otherwise, it
is only supported 2CH decoding capability.
20
Download from Www.Somanuals.com. All Manuals Search And Download.
or
Trademarks
C-Media, C-Media logo and Xear 3D are trademarks of C-Media Electronics Inc. EAX and A3D are trademarks of Creative Technology
Ltd. Microsoft, DirectSound3D, Windows are trademarks of Microsoft Corporation. Other company and product names may be
trademarks of the respective companies with which they are associated.
21
Download from Www.Somanuals.com. All Manuals Search And Download.
|