Download from Www.Somanuals.com. All Manuals Search And Download.
Title
Introduction ...................................................................................1
Getting Around ..........................................................................................1
The Displays ..............................................................................................2
The Function Keys .....................................................................................2
Other Keys .................................................................................................2
Some Conventions: ....................................................................................3
Control Panel Switch Functions Explained ...............................................4
SureVend™ ...............................................................................................5
The Supervisor Mode ................................................................................6
Basic Setup .....................................................................................7
Enter A Freevend Code ............................................................................. 7
Select Printer Baud Rate.......................................................................... 10
Set Talker Mode ...................................................................................... 12
Select Display Language ......................................................................... 12
Select Coin Mechanism ........................................................................... 12
Monetary Setup ...........................................................................12
Select Bill Validator ................................................................................ 13
Select Card Reader .................................................................................. 15
Select Monetary Options ......................................................................... 15
Set Up Winner Mode............................................................................... 18
Set Up Mug Discount .............................................................................. 19
Cup Configuration ......................................................................19
Set the Machine Type and Configuration Code ...................................... 20
Disable Selections in the Merchandiser................................................... 22
Set Up Cup Sizes ..................................................................................... 23
Assign Cup Sizes to Selections................................................................ 24
Set Up A Hot Drink ................................................................................. 25
6730018
i
July, 2003
Download from Www.Somanuals.com. All Manuals Search And Download.
Hot Drink Center II Programming Guide
Title
Cappuccino ..............................................................................................33
Caffé Latte ...............................................................................................34
European Cappuccino ..............................................................................36
Blended Selections ...................................................................................37
Set the Automatic Brewer Rinse Time .................................................... 40
SureVend Configuration ............................................................42
Optional or Mandatory SureVend™ ....................................................... 42
View Software Version............................................................................ 43
Set the Time of Day................................................................................. 44
Setup Time ...................................................................................44
Time Interval Editing............................................................................... 46
Messages ......................................................................................48
Select an Out-of-Service Message........................................................... 48
Edit Custom Message .............................................................................. 49
View Water Tank Temperature ............................................................... 51
Check the Setup ..........................................................................51
View Machine type/Configuration Setting.............................................. 51
View Cup Sizes Assigned to Selections .................................................. 52
Payout Coins............................................................................................ 52
Set Prices ................................................................................................. 53
View Nonresettable Sales and Vend Data............................................... 53
July, 2003
ii
6730018
Download from Www.Somanuals.com. All Manuals Search And Download.
Title
View Machine Data .....................................................................53
View Total Paid Sales.............................................................................. 54
View Total Sales by Drink Size............................................................... 54
View Total Sales by Individual Selection ............................................... 55
View Total Paid Sales by Price Line ....................................................... 55
View Total Paid Vends............................................................................ 56
Clear All Resettable Data ........................................................................ 56
View Free Vends ..................................................................................... 59
View Winners .......................................................................................... 59
View Time Data....................................................................................... 60
View Number of Test Vends ................................................................... 62
View Number of Mug Vends .................................................................. 62
View Number of Alt Vends..................................................................... 62
View Machine ID Number ...................................................................... 62
View Cup Ring Cycles Related to SureVend™)......................................63
View Times No Cup Was Detected After a Cup Ring Cycled................ 63
View Home Switch Usage Related to SureVend™ ................................ 63
Test Vend Selections and Verify Credit Added ...................................... 64
6730018
iii
July, 2003
Download from Www.Somanuals.com. All Manuals Search And Download.
Hot Drink Center II Programming Guide
Title
Test the Machine .........................................................................64
Test Drop a Cup....................................................................................... 64
Test the Automatic Delivery Door .......................................................... 64
Test the Whipper(S)................................................................................. 64
Test the Grinder(S) .................................................................................. 65
Test the Air .............................................................................................. 65
Test the Brewer........................................................................................ 65
Rinse the Mixing Bowls .......................................................................... 65
Rinse the Brewer...................................................................................... 66
Test Switches or Sensors ......................................................................... 66
View SureVend™ Last Recorded Calibration Value.............................. 66
View SureVend™ Average Calibration Value........................................ 67
Clear Tank Errors and Fill the Tank........................................................ 67
Test the Display ....................................................................................... 67
View Diagnostic Messages...................................................................... 68
Download Data to a PDCD...................................................................... 70
Set Freevend Options............................................................................... 71
July, 2003
iv
6730018
Download from Www.Somanuals.com. All Manuals Search And Download.
Introduction
HDC II Programming Guide
GETTING AROUND
Introduction
Getting around the Hot Drink Center software is pretty easy once you know the
features that are available to you, and how to use them. The three main parts you
will use are the SERVICE KEYPAD, the SELECTION SWITCH PANEL, and
the DISPLAY.
The Service Keypad
For most of your programming jobs,
you will be using the service keypad,
conveniently located on the monetary
panel. The service keypad has 16
keys. The three columns on the left
are the MODE keys. The right hand
column contains the MOVEMENT
keys.
The Selection Switch Panel
The selection switch panel is also
located on the monetary panel. Unlike
the service keypad, it is accessible
when the cabinet door is closed.
These are the keys the customer will
use to make selections. You can also
use these keys during programming
procedures.
6730018
1
July, 2003
Download from Www.Somanuals.com. All Manuals Search And Download.
HDC II Programming Guide
Introduction
THE DISPLAYS
The 10-character display performs two functions, and is referred to in this book
as "the display":
•
•
It shows the customer's selection and how much credit is in the machine,
as well as the ready, service, and time of day messages.
It provides information and feedback to the service person during mainte-
nance.
THE FUNCTION KEYS
The keys on the control panel can be used for up to three things:
THE PRIMARY PURPOSE
THIS IS THE MAIN JOB OF THE KEY. FROM THE STANDBY
MESSAGE, IT WILL ALLOW YOU TO ENTER
A
PROGRAM-
MING MODE. IN THIS EXAMPLE, YOU CAN VIEW STORED
SALES DATA.
THE NUMBER
YOU MIGHT BE ASKED TO
ENTER
A
NUMERICAL VALUE.
PRESSING THIS KEY WILL
ENTER A "5".
THE SECONDARY PURPOSE
THIS IS THE KEY'S "SECOND JOB". FOR EXAMPLE, THIS KEY
CAN BE USED TO DELETE
A
CHARACTER WHEN YOU ARE
EDITING CUSTOM MESSAGES.
OTHER KEYS
The MOVEMENT keys on the control panel let you move inside a mode, and
back and forth between modes.
These keys are your "legs", which let you move up and
down the list of tasks. They let you continue from one step
to the next in programming procedures.
This is your "activate" or "choose" key. It "opens a door" to
additional information and lets you begin a programming
task once you are inside of a mode. Sometimes, it is used as
a toggle switch to show you your choices during a program-
ming task.
This key can be used before running a function, or to
choose “ALL” in a multiple selection.
This is your "end" key. Pressing it one or more times will
move you back to the start of the mode, or all the way back
to the standby message.
July, 2003
2
6730018
Download from Www.Somanuals.com. All Manuals Search And Download.
Introduction
HDC II Programming Guide
SOME CONVENTIONS:
All programming procedures assume that you are starting with the standby mes-
sage showing in the display. If not, just press
until you get there.
Each programming procedure is highlighted by a pointing hand:
will stand out.
so it
Definitions and helpful information will appear in shadow boxes:
HELPFUL HINT
When you see the word CONTINUE at the end of a function, it means to press
until you return to the standby message.
6730018
3
July, 2003
Download from Www.Somanuals.com. All Manuals Search And Download.
HDC II Programming Guide
Introduction
CONTROL PANEL SWITCH FUNCTIONS EXPLAINED
Press this button to put your machine into the Price Setting mode.
You can see maximum and minimum machine prices, and change
prices for entire machine, product, or individual selection.
Press this button to set up how the Free Vend mode will operate.
Press this button to view the water tank temperature, software ver-
sion number, machine and accessory configuration, and active selec-
tion status.
Press this button to:
•
•
•
Select display language
•
•
•
•
Select card reader and options
Select monetary options
Set winner feature
Select coin mechanism and options
Select bill validator and options
Set mug discount option
Press this button to:
•
•
Clear resettable data
View or set machine ID
•
View total sales and vends by whole
machine, selection, or drink size
Press this button to:
•
Download data into your portable data collection device (PDCD), OR
•
Set printer baud rate, depending upon which device you are using
Press this button to:
•
•
•
Set machine configuration
Set which selections are active
Set up water tank low power
•
•
•
Set up blended selections
Set up cup sizes
Select SureVend™ options
Press this button to:
•
•
•
Set time of day
•
•
•
Select display messages
Edit messages
Set message scrolling speed
Set day, month, year
Set up time of day intervals for
inhibit, freevend, and discount
vending
Press this button to pay one or more coins from the coin mechanism.
Press this button to see any fault or condition that may place the
machine out of service
Press this button to:
•
Perform TEST VENDS
•
•
Test displays
Fill the water tank
• Test machine functions
Press this button to:
•
•
Enter the SUPERVISOR mode
Change the SUPERVISOR access
code
•
•
Lock and unlock access to func-
tions
Set free vend code
July, 2003
4
6730018
Download from Www.Somanuals.com. All Manuals Search And Download.
Introduction
HDC II Programming Guide
SUREVEND™
SureVend™ ensures that a cup is always available in the cup station before any
money is collected or product delivered. The sensing system is a beam of infra-
red light across the cup station which is broken by the cup when it falls into posi-
tion.
The SureVend™ software monitors the cup station sensor during the time the cup
ring is cycled and for three seconds afterward. If a cup is not detected, the soft-
ware will first determine if a second cup ring with the same size cups exists and
will then try to drop a cup from the second ring. If the second ring also fails to
drop a cup or is not usable, the software will repeat the attempt from the first cup
ring to attempt to clear any jams in the cup delivery area. Each ring will be tried
up to two times. If a cup is still not detected by the infrared sensor then several
things happen:
•
•
•
Any ring that failed twice in a row is placed temporarily out-of-service for
a length of time that is determined by the user,
The customer's credit is either restored for another vend attempt or is
returned automatically,
Three beeps are sounded and the message
flashed if another size cup ring is available, or the message
is flashed in the event that no other cups are available. The customer may
always get his money back by pressing the coin return button.
NOTE
is the default message. You may customize this message
if desired
(see "Edit Custom Message", PAGE 49 for more information).
Special rules exist to protect both the customer and the operator from loss. First
and foremost, the customer is protected because no drink is spoiled nor money
lost because a cup fails to fall to the cup station. The customer is given every
chance to get his original choice of cup size by trying at least twice per ring to
eject a cup. If two rings are available with the same cup size, the system will
alternately try to vend a cup from each ring until the cup is delivered or both
rings are placed out-of-service.
6730018
5
July, 2003
Download from Www.Somanuals.com. All Manuals Search And Download.
HDC II Programming Guide
Introduction
The operator is protected by the anti-jackpot program of the system. It is con-
ceivable that a customer could prevent cups from reaching the sensing area of the
cup station in order to steal the cups and then get his or her money back for the
vend. Under the SureVend™ Anti-Jackpot system, the operator can lose no more
than two cups in a row per ring. Then that ring is temporarily placed out-of-ser-
vice both to protect the customer and to discourage theft. The amount of time
that the cup ring is out-of-service is programmable from 0 to 99 minutes. After
the time has elapsed, the cup ring will return to service but the count of the two
failures is kept. If the previous problem was theft, then the next vend attempt
from that ring will be successful and the count of the two previous failures will
be erased. If the problem is an actual system failure, then the third failure will
permanently place that cup ring out of service until a service technician visits the
machine.
Alternate cup vends and mug vends still work as before. If a cup ring is out of
price. This protects the operator from customers trying to get large cup drinks at
a small cup price. (SureVend™ will not automatically switch to a different cup
size in mid-vend because it cannot be ensured that correct change will be
returned for the new price.)
SureVend™ can be turned off if desired (see "Turn SureVend™ On or Off",
PAGE 42).
THE SUPERVISOR MODE
The supervisor is allowed to do things that a normal user cannot, like controlling
access to certain modes. The supervisor can lock out any of the programming
modes to anyone who does not have the right "key". Once a supervisor enters the
proper code, he or she will be able to:
•
•
Change the supervisor access code
Lock out any or all of the service keypad modes
•
Set whether data is cleared with
or after being downloaded into a
portable data collection device
•
•
Grant or deny access to data items during DATA RECALL
Modify the machine configuration
July, 2003
6
6730018
Download from Www.Somanuals.com. All Manuals Search And Download.
Basic Setup
HDC II Programming Guide
PROGRAMMING PROCEDURES
Basic Setup
GAIN ACCESS TO THE SUPERVISOR MODE
. The display shows: . You must enter the four-
1. Press
digit supervisor code within 6 seconds to gain access.
NOTE
A new machine has a factory-set supervisor code of 0000.
When you have entered the right code, you will hear two beeps and see
in the display.
ENTER A NEW SUPERVISOR CODE
1. Follow the steps in "Gain Access To The Supervisor Mode", PAGE 7.
2. Press
. The display shows
. The X's represent the cur-
rent supervisor code. Use the number keys to enter a new code.
IMPORTANT
If you enter a new code, be sure to keep a written record of it.
There is no other way to access the SUPERVISOR mode.
3. CONTINUE.
ENTER A FREEVEND CODE
1. Follow the steps in "Gain Access To The Supervisor Mode", PAGE 7.
2. Press
, then
until the display shows
. The X's
represent the current freevend code. Use the number keys to enter a new
code. If the code is anything other than "
", it must be entered after the
key lock is turned in order to enable free vends.
3. CONTINUE.
6730018
7
July, 2003
Download from Www.Somanuals.com. All Manuals Search And Download.
HDC II Programming Guide
ENTER A NEW DATA RECALL CODE
If the proper non-zero code is entered, sales and non-resettable sales data can be
viewed without opening the machine’s door.
1. Follow the steps in "Gain Access To The Supervisor Mode", PAGE 7.
2. Press
, then
until the display shows
. The X's rep-
resent the currently entered code. Use the number keys to enter a new code,
if desired.
NOTE
A code of
disables this feature.
USAGE
With the machine in ready mode, enter the 4-digit code. When
the correct code is entered, the non-resettable sales total is dis-
played. This display will remain active for 9 seconds, or until
another key is pressed.
3. CONTINUE.
July, 2003
8
6730018
Download from Www.Somanuals.com. All Manuals Search And Download.
Basic Setup
HDC II Programming Guide
LOCK OR UNLOCK MODE OR PAYOUT KEYS
1. Follow the steps in "Gain Access To The Supervisor Mode", PAGE 7
2. Press
, then
until the display shows either #
or #
. To see if a key is locked or unlocked, press that key.
3. Press
to change between locked and unlocked. When anyone other
than the supervisor tries to enter a locked mode, the display shows
.
EXAMPLES: Press , then press to lock the function. Now,
non-supervisory users can NOT view any sales data.
If you want non-supervisory users to view data but not be able to clear data,
leave the
key unlocked, but do lock
.
NOTE
The following mode keys cannot be locked out:
4. CONTINUE.
6730018
9
July, 2003
Download from Www.Somanuals.com. All Manuals Search And Download.
HDC II Programming Guide
Basic Setup
SET PRINTER OR DEX OPTIONS
1. Follow the steps in "Gain Access To The Supervisor Mode", PAGE 7.
2. Press
, then
until the display shows:
- means that data will be sent directly to a printer,
- OR -
means that data remains in memory after it is downloaded into a
portable data collection device (PDCD),
- OR -
means that resettable data is cleared after it is downloaded into a
PDCD.
- OR -
- a special DEX option. All sales data will become non-resettable.
Consult your DEX supplier before choosing this option.
3. Press
4. CONTINUE.
to change between the three choices.
SELECT PRINTER BAUD RATE
(PRINTER MODE ONLY)
BAUD
RATE
The speed of data transfer, expressed in bits per second.
Your printer can receive data at a certain rate, and you must
tell the machine what that rate is.
1. Press
2. Press
. One of the following is displayed:
until the correct baud rate for your printer is displayed.
3. CONTINUE.
July, 2003
10
Download from Www.Somanuals.com. All Manuals Search And Download.
6730018
Basic Setup
HDC II Programming Guide
SET DEX OPTIONS (DEX MODE ONLY)
1. Follow the steps in "Gain Access To The Supervisor Mode", PAGE 7.
2. Press
, then
until the display shows one of two resettable
bill validator totals transmitted to the DEX device:
- the value of bills in the stacker will be transmitted in a
cash format. For example: 200 for two dollars. (This is the default setting.)
- the value of bills in the stacker will be transmitted in a dol-
lar count format. For example: 2 for two dollars.
3. Press
to switch between the two choices. Consult your DEX hand-
held supplier for the proper settings for your machine.
NOTE
If your bill count is incorrect, the CA304 setting may be
wrong. Try using the other setting.
4. Press
options:
until the display shows one of the following two date/time
- the DEX device will transmit the date and time of the last
vend for each selection.
- OR -
- the DEX device will NOT transmit the date and time of the
last vend for each selection. (This is the default setting)
5. Press
to switch between the two choices.
6. CONTINUE.
6730018
11
Download from Www.Somanuals.com. All Manuals Search And Download.
July, 2003
HDC II Programming Guide
Monetary Setup
SET TALKER MODE
1. Follow the steps in "Gain Access To The Supervisor Mode", PAGE 7.
2. Press
3. Press
, then
until the display shows
or
to turn the talker option ON or OFF.
NOTE
Talker hardware must be installed for this to work.
4. CONTINUE.
SELECT DISPLAY LANGUAGE
1. Press
. The current LANGUAGE displays. Press
to
choose the desired language. Your choices are:
,
,
,
,
,
, or
.
2. CONTINUE.
SELECT COIN MECHANISM
Monetary Setup
1. Press
, then press
shown in the display. Press
Your choices are:
to choose the desired coin mechanism.
2. Proceed to SELECT MONETARY OPTIONS, page 15, to customize
your coin mechanism choice.
NOTE
Depending upon your choice of coin mechanisms, some
choices may not display.
3. CONTINUE.
July, 2003
12
6730018
Download from Www.Somanuals.com. All Manuals Search And Download.
Monetary Setup
HDC II Programming Guide
SELECT BILL VALIDATOR
1. Press
, then press
until one of the following is displayed:
-
No bills will be accepted or there is no bill validator
installed (you can exit the function).
- The pulse bill validator will accept $1 bills.
-
The serial bill validator is selected and will accept $1, $2,
$5, $10, and $20 bills. Use BILL SELECTION METHOD
below to change the bills that will be accepted.
-
A standard MDB bill validator is selected. It will accept
$1, $2, $5, $10 and $20 bills. Use BILL SELECTION
METHOD below to change the bills that will be accepted.
BILL SELECTION METHOD:
The standard $1, $2, $5, $10 and $20 bills are enabled by
pressing the 1, 2, 5, 6, or 7 key(s), respectively, to display
which bill(s) will be accepted.
-
An MDB bill validator that accepts coupons or non-stan-
dard bills (normally used for non-U.S. currency) is con-
< >
*
See BILL LIST OPERATION. See INITIAL SETUP OF
NON-STANDARD BILL VALIDATOR.
2. Press
to choose the desired option.
3. Proceed to "Select Monetary Options", PAGE 15, to customize your bill
validator choice.
NOTE
Depending upon your choice of bill validator, some choices
may not display.
4. CONTINUE.
6730018
13
July, 2003
Download from Www.Somanuals.com. All Manuals Search And Download.
HDC II Programming Guide
Monetary Setup
INITIAL SETUP OF A NON-STANDARD BILL
VALIDATOR
1. Connect the bill validator, and follow the steps in "Select Bill Validator",
PAGE 13 to select in the bill validator selection screens.
< > will not be an option yet. Exit the bill validator setup by press-
*
ing
. Bill information is now collected from the validator.
2. Press
, then press
until
< > displays.
*
3. Press
.
will display. The first number ( ) indicates bill
validator channel 1, the
is the bill denomination, and
indicates that
the validator will accept $1.00 bills.
4. Press
to toggle the bill acceptance
or
.
5. Press
and
and
to scroll through the list of other denominations
to set them to
or
.
6. Press
to move up to the top level screen.
NOTE
If a denomination does not display in the scroll list of available
denominations, check the binary switch settings for the valida-
tor. If the binary switch for a given denomination is set to
“off”, it will not display in the list of denominations.
July, 2003
14
6730018
Download from Www.Somanuals.com. All Manuals Search And Download.
Monetary Setup
HDC II Programming Guide
SELECT CARD READER
1. Press
, then press
until the current card reader is shown in
to choose the desired card reader.
the display. Press
2. Your choices are:
,
, or
.
3. Proceed to SELECT MONETARY OPTIONS, page 15, to customize
your card reader choice.
NOTE
Depending upon your choice of card reader, some displays
may not appear.
4. CONTINUE.
SELECT MONETARY OPTIONS
Certain options can be selected, depending upon which monetary devices you
have selected.
This function lets you:
•
•
•
Set change returning criteria
Set declining balance
Set currency acceptance on low • Set card reader revalue options
change
•
•
Set overbuy options
Set last bill stacking options
1. Press
, then press
until the display shows
.
represents the largest denomination coin or bill that will be changed
without a purchase. Any non-zero value here will return all escrowed coins.
(Each coin denomination for which the coin mech has a tube is called an
ESCROWED coin because it can be returned.) When the coin return button
is pressed, all coins inserted will be returned provided there is a coin mech
tube for each of those coins, EXCEPT in the forced vend mode.
Some examples:
- Forced vend; NO change returned without a purchase.
- Returns change without purchase if all accepted coins are
less than .25 denomination or have a payout tube. Accep-
tance of a dollar coin will not cause a Force Vend if the
coin mechanism has a dollar coin payout tube. Otherwise,
accepting a dollar coin or accepting and stacking of a dol-
lar bill will cause a Force Vend.
- Bills and non-escrowed coins less than or equal to $1.00
will be changed without purchase. All escrowed coins
are returned.
6730018
15
July, 2003
Download from Www.Somanuals.com. All Manuals Search And Download.
HDC II Programming Guide
Monetary Setup
2. Press
until one of the following is displayed:
3.
4.
<
-Accept any bill of value $X.XX or less, regardless of avail-
able change. Hold the last bill which meets or exceeds maximum price in
escrow. (This setting is normally used.)
- OR -
-Accept any bill of value $X.XX or less, regardless of avail-
able change. Immediately stack the last bill.
Example: If setting is
and maximum price is $1.50. This
setting will immediately stack the second $1.00 bill inserted.
5. Press
to display the desired choice.
" has two purposes:
6. The value of "
a. The value of "
" tells the machine how big a bill or coin to accept
even though there is not enough change in the coin mech to cover all
possible paybacks.
For example, enter 1.00. Therefore, the machine will take a dollar bill
or coin even though there is less than $1.00's worth of change. Entering
5.00 tells the machine to take a five even though there is less than
$5.00's worth of change, and so forth.
NOTE
This could cause a customer to be short-changed.
Entering 0.00 means that bills or coins not held in escrow or in a tube
will only be accepted if there is enough change to cover them.
b. The value of "
" tells the machine how much the customer is allowed
to overbuy a product. The customer will be short-changed when an
overbuy occurs. Example:
For a value of $0.25: if there is no change in the machine and the cus-
tomer inserts a $1.00 bill. The customer can purchase a product for
$0.75 even though the change cannot be paid back. The customer will
be short-changed. Normally a purchase will not be approved unless all
change can be paid.
Entering 0.00 means that the vend will only be approved when the cor-
rect change can be returned (overbuy disabled).
July, 2003
16
6730018
Download from Www.Somanuals.com. All Manuals Search And Download.
Monetary Setup
HDC II Programming Guide
7. Press
show
until the display shows:
. The display will
when the amount of available change in the coin
mechanism falls below the value of "
keys. For example, if
". Enter a value with the number
is displayed, the
message is displayed when less than a dollar's worth of change is in
the coin mechanism.
Once credit is established, multiple
vends may occur until the coin return is
pressed.
DECLINING
BALANCE:
8. Press
until one of the following is displayed:
- More than one vend is allowed, with a declining balance.
- OR -
- A declining balance is not allowed.
9. Press
10. Press
to display the desired choice.
until one of the following is displayed (only for machines
with Card option):
- Allows credit to be transferred onto the card
- Credit cannot be transferred to the card
11. Press
to display the desired choice.
6730018
17
July, 2003
Download from Www.Somanuals.com. All Manuals Search And Download.
HDC II Programming Guide
Monetary Setup
SET UP WINNER MODE
WINNER
At preselected intervals, a customer may receive a
refund for a selection. You can select the interval and
qualifying selections.
1. Press
, then press
until one of the following is displayed:
- Winner function is disabled.
- OR -
- Winners are allowed at certain intervals, represented by "
".
Press
to display the desired choice.
If you selected
, you can exit the function.
2. The display shows
. XXX represents the number of vends that
must occur per each winner vend. For example, an interval number of 50
means that a winner can happen any one time during the next 50 vends.
Using the number keys, enter an interval number between 10 and 9999.
3. Press
. The display shows - - - - - - - - -. The dashes in the display
*
represent which selections are allowed winners. Press the appropriate letter
key to enable a selection, press the key again to disable it. For example,
pressing A, C, and E will cause the display to look like this:
-
-
- - - - - meaning that all A, C, and E products can have a winner.
ADVANCED OPTIONS:
•
Press
Press
to enable all selections.
•
•
to deactivate all selections.
Press 0 or 1 to set winner selections by cup size.
July, 2003
18
6730018
Download from Www.Somanuals.com. All Manuals Search And Download.
Cup Configuration
HDC II Programming Guide
NOTE
If displaying WINNER by selection, press
redisplay wildcard ( , ....) selections.
once to
*
AN EXAMPLE . . .
You want to enable winners on all selections except E and F. Do the following:
a. Press
the dashes.
. The letters through appear in the display instead of
b. Press "E" and "F". The letters and in the display are replaced by
dashes.
NOTE
This is a two-part screen. Press
to display selections
.
4. CONTINUE.
SET UP MUG DISCOUNT
You can establish a discount for customers who use their own mug.
Cup Configuration
1. Press
, then press
until the display shows
.
This example shows the existing discount amount is zero.
2. Enter a discount amount. This will be in cents, for example press
or 5 to enter a discount amount of 5 cents.
3. CONTINUE.
6730018
19
July, 2003
Download from Www.Somanuals.com. All Manuals Search And Download.
HDC II Programming Guide
Cup Configuration
SET THE MACHINE TYPE AND CONFIGURATION
CODE (SUPERVISOR MODE ONLY)
1. Press
2. Press
3. Press
, then
until the display shows
.
or
or 1 to enter
until the display shows
. “D” is the automatic
delivery door status. A plus sign (+) means the door is on; a dash (-) means
the door is off. Toggle this setting by pressing . “J” is the whipper
setting. Toggle a plus sign (+) or a dash (-) with the J key. See "Whipper
Options", PAGE 26 for more information. "WXYZ" is the machine config-
uration code. W represents the machine type, X is the 6th product configu-
ration, Y is the brewer configuration, and Z is canister mapping. The
following tables give the possible values for each of the four numbers.
Enter the appropriate configuration code for your machine.
Table D1 Machine Type Configuration
Enter for (W)
Definition
Hot Drink Center model 675
Hot Drink Center models 673 and 677
1
5
Table D2 6th Product (Selection C) Configuration
Enter for (X) Definition
1
2
3
4
No 6th product
6th product present, but receives no condiments
6th product present, may receive condiments
Water only
July, 2003
20
6730018
Download from Www.Somanuals.com. All Manuals Search And Download.
Cup Configuration
HDC II Programming Guide
SINGLE BREW
A machine with only one brewed selection
(the second selection is freeze dried). Uses a
single barrel brewer.
DUAL BREW
A machine with two brewed selections.
DUAL CONDIMENT
A machine with two separate sets of condi-
ments (lightener/sugar) to avoid cross-flavor-
ing.
Table D3 Brewer Configuration
Number of
Coffee Mix
Enter for (Y)
Condiment Sets
Brewers
1
2
6
Single Brew
Dual Brew
Freeze Dry
One
One
Single
Single
Single
None
Table D4 Canister Mapping (See figure below)
Menu Selection Letters for Canister Numbers
Enter for (Z)
3 (Single condiment only)
2
1
1
2
3
4
F
F
B
A
F
A
B
A
F
B
B
A
SIXTH PRODUCT
(C)
SUGAR
TEA/COFFEE
(F)
LIGHTENER
DECAF
(B)
SUGAR SUBSTITUTE/
SEVENTH PRODUCT
(X)
COFFEE
(A)
SOUP/
FIFTH PRODUCT
(H)
CHOCOLATE
(G)
7
6
5
4
3
2
1
WHIPPER 1
653p0007
WHIPPER 5
WHIPPER 4
WHIPPER 2
WHIPPER 3
6730018
21
Download from Www.Somanuals.com. All Manuals Search And Download.
July, 2003
HDC II Programming Guide
Cup Configuration
Canister Mapping
DISABLE SELECTIONS IN THE MERCHANDISER
, then press until the display shows something like
1. Press
this:
This display means that all regular size selections (A - H) are not available
for vending. An available selection has its letter replaced by a blank space.
Press
to display the second screen for X, Y, and Z selections.
2. Press the appropriate letter to toggle the display on or off.
NOTE
Press
to lock all selections; press
selections.
to unlock all
3. CONTINUE.
July, 2003
22
6730018
Download from Www.Somanuals.com. All Manuals Search And Download.
Cup Configuration
HDC II Programming Guide
SET UP CUP SIZES
Make sure the cup sizes you select agree with the cups you have actually loaded
during setup.
1. Press
the display shows
. "X" is the currently selected
drink size for the cups in turret 2 (normally large cups), "Y" is the currently
selected drink size for the cups in turrets 1A and 1B (normally regular
cups).
2. Press
to toggle through the #1 cup ring sizes; press
to
toggle the #2 cup ring size.
3. Any changes made to the cup sizes must be "locked in". There are two
ways to do this:
a. If you are keeping some cup sizes the same, or putting the cups in differ-
ent cup rings, press and hold
. The display momentarily shows
. This will reassign the
, two beeps sound, then shows
old throw times to the new cup ring, if possible.
b. If you are loading all different size cups, or want to load all new default
times, press and hold
. The display momentarily shows
. This will reload the
, two beeps sound, then shows
factory default times for all cup sizes, clearing any custom throw times
you have established. (See the tables on the following pages for the fac-
tory default times.)
4. CONTINUE.
6730018
23
July, 2003
Download from Www.Somanuals.com. All Manuals Search And Download.
HDC II Programming Guide
Cup Configuration
ASSIGN CUP SIZES TO SELECTIONS
(SUPERVISOR MODE ONLY)
You can load up to two different sizes of cups in your machine (see "Set Up Cup
Sizes", PAGE 23). You may not always want a certain selection to use all of the
cup sizes in your machine. For example, espresso is normally served in regular
cups, so you probably will not want it to be available in large or jumbo cups.
1. Press
this:
, then press
until the display shows something like
. This display means that the smaller of the two cup sizes ( )
is available for all selections (A - H).
NOTE
Press
to display all selections; press
to clear all selections.
). In this dis-
2. Press
to display remaining selections (
play, the “X” represents the 7th product, and the “2” represents the cup only
selection.
NOTE
If you have only one cup size in your machine, you will not see
the next display.
3. Press
. The display shows something like this:
. This display means that the larger of the two cup sizes ( ) is
available for all selections (A - H).
4. Press the appropriate letter to toggle the display on or off. A selection that
doesn't vend the displayed size cup has its letter replaced by a dash (-).
NOTE
Press
to display all selections; press
to clear all selections.
). In this dis-
5. Press
to display remaining selections (
play, the “X” represents the 7th product, and the “2” represents the cup only
selection.
To vend a cup only, press 1, 2, 3 (large size) or 2, 3 (regular size).
6. CONTINUE.
July, 2003
24
6730018
Download from Www.Somanuals.com. All Manuals Search And Download.
Set up a Hot Drink
HDC II Programming Guide
SET UP A HOT DRINK
Set up a Hot Drink
Be sure that the cup sizes you set in "Set Up Cup Sizes", PAGE 23, agree with
the cup sizes actually in your machine. All procedures for setting up the hot
drinks are similar, so this example will demonstrate how to set up the A selection,
regular size fresh brew coffee.
1. Press
, then press
until the display shows
-
. The
*
star ( ) represents the selection (A, B, etc.). The dash (-) represents the
*
size of the selection.
2. Press A. (If you were setting up the A selection for the large size drink, you
would press 1 first, then A.) The display shows
. This means
that the currently set water throw time for the A selection is 8.25 seconds.
Enter a new time if desired.
3. Press
. The display shows
. This means that the cur-
rently set dry product throw time for the A selection is .60 seconds. Enter a
new time if desired.
4. Pressing
display:
after each display will cause the following screens to
View and change the settings for an extra strong drink
View and change the settings for the sugar throw time
View and change the settings for extra sugar throw time
View and change the settings for the lightener throw time
View and change the settings for extra lightener throw time
View and change the settings for the sugar sub throw time
View and change the settings for extra sugar sub throw time
View and change the steep time
View and change the steep time for an extra strong drink
View and change the air compressor/pump running time
View and change the amount of time after the vend to open
the auto vend door
6730018
25
Download from Www.Somanuals.com. All Manuals Search And Download.
July, 2003
HDC II Programming Guide
Set up a Hot Drink
Whipper Options
Press
-
The last 3 seconds of the drink is always whipped
The whole drink is always whipped
The drink is never whipped
See below
•
•
If
is selected (see "Set the Machine Type and Configuration Code
(Supervisor Mode Only)", PAGE 20):
OPT-
The last 3 seconds of the drink is whipped only when the J
key is pressed
OPT+
The whole drink is whipped only when the J key is pressed
If - is selected (see "Set the Machine Type and Configuration Code
(Supervisor Mode Only)", PAGE 20):
OPT-
The last 3 seconds of the drink is whipped unless the J key is
pressed
OPT+
The whole drink is whipped unless the J key is pressed
DIFFERENCES:
Some selections will not show all of these items. The E selection will have some
additional selections:
View and set the water throw time for the cappuccino second
product (chocolate)
View and set the chocolate throw time for cappuccino
To automatically compute new times for cappuccino, enter a
percentage, then press
. This percentage represents
the amount of chocolate product in cappuccino, versus that
in a normal chocolate drink. This time and the normal coffee
settings will compute the new cappuccino time.
July, 2003
26
6730018
Download from Www.Somanuals.com. All Manuals Search And Download.
Set up a Hot Drink
HDC II Programming Guide
OPTIONS:
a. At any of the preceding displays, you can press
that item.
to test throw
b. At any of the preceding displays, you can press or # (on the selection
*
switch panel) to step through a list of that item's throw times for other
selections where that item is active. For example, pressing # at the
display will show the throw time for
. This is a handy
way to move from one selection to another without going to the
screen first.
NOTE
If you try to set up a selection that is not configured, the
screen will remain in the display.
5. CONTINUE.
6730018
27
July, 2003
Download from Www.Somanuals.com. All Manuals Search And Download.
HDC II Programming Guide
Set up a Hot Drink
COLLECTING DRY PRODUCT GRAM THROWS
Measuring the gram throw allows you to get the right amount of dry product or
condiment into your hot drink. To do this, you need a container to catch the prod-
uct throw and an accurate gram scale to measure its weight.
1. Make a measuring container by cutting down a paper cup until it fits under
the canister spout as shown.
2. Weigh the measuring cup and zero the gram scale accordingly.
3. Make 5 test throws as instructed in the programming steps.
4. Weigh each test throw, then add all 5 weights together and divide by 5 to get
an average weight.
5. If necessary, adjust the throw time and repeat steps 3 and 4 until you get the
correct product or condiment weight.
Tables D1 and D2 show the factory default settings for the various dry products
sold by the merchandiser. They are good starting points to use in setting up your
machine. In the end, the amount of dry product or condiments you use in your
drinks depends upon taste and manufacturers’ recommendations. Recommended
weights and times are for guidance only, and you do not have to adhere to them.
LIGHTENER
SUGAR
SUGAR
SUBSTITUTE
CUP POSITION
FOR TEST
THROW
CHUTE
MIXING
BOWL
COVER
FRESH BREW
COFFEE
CANISTER
COLLECTING
CONDIMENT
THROWS
CHUTE
CUP POSITION
FOR TEST THROW
July, 2003
28
6730018
Download from Www.Somanuals.com. All Manuals Search And Download.
Set up a Hot Drink
HDC II Programming Guide
Table D1 Dry Product Weight and Throw Time Factory Default Settings
Weight (in grams) per size cup (in ounces)
Selection
Throw times (in seconds) per size cup
10 12 14 16 18 20
5
7
8
9
5.70 8.00 9.00 10.00 11.00 13.00 15.30 17.50 19.60 21.80
1.60 2.20 2.50 2.80 3.10 3.65 4.25 4.85 5.45 6.05
A Fresh brew coffee
A Freeze dry coffee
0.90 1.20 1.50 1.60 1.80 2.20 2.55 2.90 3.25 3.65
0.35 0.50 0.60 0.65 0.70 0.90 1.00 1.15 1.30 1.45
Strong freeze dry cof- 1.10 1.50 1.80 2.00 2.20 2.60 3.05 3.50 3.95 4.35
A
fee
0.65 0.90 1.10 1.20 1.35 1.60 6.85 2.15 2.40 2.70
5.70 8.00 9.00 10.00 11.00 13.00 15.30 17.50 19.60 21.80
1.60 2.20 2.50 2.80 3.10 3.65 4.25 4.85 5.45 6.05
B Fresh brew decaf
B Freeze dry decaf
0.90 1.20 1.50 1.60 1.80 2.20 2.55 2.90 3.25 3.65
0.35 0.50 0.60 0.65 0.70 0.90 1.00 1.15 1.30 1.45
Strong freeze dry
decaf
1.10 1.50 1.80 2.00 2.20 2.60 3.05 3.50 3.95 4.35
0.65 0.90 1.10 1.20 1.35 1.60 6.85 2.15 2.40 2.70
B
10.8 15.0 17.8 19.4 21.6 25.9 30.20 34.50 38.85 43.15
2.45 3.35 4.00 4.35 4.85 5.80 6.80 7.75 8.75 9.70
C Soluble product
Fresh brew coffee
ESPRESSO
5.70 8.00 9.00 10.00 11.00 13.00 15.30 17.50 19.60 21.80
1.60 2.20 2.50 2.80 3.10 3.65 4.25 4.85 5.45 6.05
D
Freeze dry coffee
ESPRESSO
0.90 1.20 1.50 1.60 1.80 2.20 2.55 2.90 3.25 3.65
0.35 0.50 0.60 0.65 0.70 0.90 1.00 1.15 1.30 1.45
D
Strong freeze dry cof- 1.05 1.50 1.80 2.00 2.20 2.60 3.05 3.50 3.95 4.35
D
E
E
E
F
F
fee ESPRESSO
0.65 0.90 1.10 1.20 1.35 1.60 6.85 2.15 2.40 2.70
Fresh brew coffee
CAPPUCCINO
5.70 8.00 9.00 10.00 11.00 13.00 15.30 17.50 19.60 21.80
1.60 2.20 2.50 2.80 3.10 3.65 4.25 4.85 5.45 6.05
Freeze dry coffee
CAPPUCCINO
0.90 1.20 1.50 1.60 1.80 2.20 2.55 2.90 3.25 3.65
0.35 0.50 0.60 0.65 0.70 0.90 1.00 1.15 1.30 1.45
Strong freeze dry cof- 1.05 1.50 1.80 2.00 2.20 2.60 3.05 3.50 3.95 4.35
fee CAPPUCCINO
0.65 0.90 1.10 1.20 1.35 1.60 6.85 2.15 2.40 2.70
0.90 1.20 1.50 1.60 1.80 2.20 2.55 2.90 3.30 3.65
0.70 1.00 1.25 1.30 1.60 1.85 2.10 2.40 2.20 2.05
Instant tea
1.10 1.50 1.80 2.00 2.20 2.60 3.05 3.50 3.95 4.35
0.90 1.25 1.60 1.75 1.85 2.10 6.85 2.15 2.40 2.70
Strong instant tea
17.00 24.00 28.00 31.00 34.00 41.00 47.50 54.50 61.00 68.00
2.80 4.00 4.65 5.15 5.65 6.80 7.90 9.00 11.80 12.25
G Chocolate
4.30 6.00 7.00 7.60 8.50 10.20 11.90 13.60 15.30 17.00
0.70 1.00 1.15 1.25 1.35 1.65 1.95 2.25 2.50 2.80
H Soup
10.80 15.00 17.80 19.40 21.60 25.90 30.20 34.50 38.85 43.15
2.45 3.35 4.00 4.35 4.85 5.80 6.80 7.75 8.75 9.70
H Soluble product
X Soluble product
10.80 15.00 17.80 19.40 21.60 25.90 30.20 34.50 38.85 43.15
2.45 3.35 4.00 4.35 4.85 5.80 6.80 7.75 8.75 9.70
Sugar used in
espresso
2.20 2.85 3.50 3.80 4.15 5.10 6.05 6.70 7.65 8.50
0.35 0.45 0.55 0.60 0.65 0.80 0.95 1.05 1.20 1.35
D
Extra sugar used in
espresso
3.20 4.15 4.80 5.10 5.76 6.70 8.00 9.30 10.55 11.50
0.50 0.65 0.75 0.80 0.90 1.05 1.25 1.45 1.65 1.80
D
6730018
29
Download from Www.Somanuals.com. All Manuals Search And Download.
July, 2003
HDC II Programming Guide
Set up a Hot Drink
Table D1 Dry Product Weight and Throw Time Factory Default Settings
Weight (in grams) per size cup (in ounces)
Selection
Throw times (in seconds) per size cup
10 12 14 16 18 20
5
7
8
9
Sugar used in cappuc- 3.60 5.20 6.00 6.55 7.30 8.70 10.20 11.60 13.10 14.55
E
E
F
F
F
F
F
F
cino
0.45 0.65 0.75 0.80 0.90 1.10 1.25 1.45 1.65 1.80
Extra sugar used in
cappuccino
4.60 6.95 7.75 8.50 9.25 11.15 13.10 15.00 16.95 18.50
0.60 0.90 1.00 1.10 1.20 1.45 1.70 1.95 2.20 2.40
4.20 6.00 7.00 7.75 8.55 10.10 12.05 13.60 15.15 17.10
0.55 0.75 0.90 1.00 1.10 1.30 1.55 1.75 1.95 2.20
Sugar used in tea
Extra sugar used in
tea
5.45 7.75 8.95 9.70 10.90 12.85 13.60 17.50 19.45 21.75
0.70 1.00 1.15 1.25 1.40 1.65 1.75 2.25 2.50 2.80
1.20 1.50 2.00 2.20 2.45 2.95 3.40 3.90 4.35 4.85
0.70 0.85 1.15 1.25 1.40 1.70 1.95 2.25 2.50 2.80
Lightener used in tea
Extra lightener used 1.55 2.15 2.50 2.75 3.00 3.60 4.20 4.80 5.45 6.05
in tea 0.90 1.25 1.45 1.60 1.75 2.10 2.45 2.80 3.15 3.50
Sugar substitute used 0.60 0.85 1.00 1.10 1.30 1.50 1.70 1.90 2.20 2.40
in tea 0.75 1.05 1.25 1.35 1.60 1.90 2.10 2.40 2.75 3.00
Extra sugar substitute 0.80 1.10 1.30 1.40 1.60 1.90 2.15 2.50 2.80 3.10
used in tea
1.00 1.35 1.60 1.75 2.00 2.40 2.70 3.10 3.50 3.90
*
*
4.25 5.05 7.00 7.75 8.95 10.90 12.05 13.60 15.15 17.10
0.55 0.75 0.90 1.00 1.15 1.40 1.55 1.75 1.95 2.20
Sugar
*
*
5.45 7.75 8.95 9.70 10.90 12.85 13.60 17.50 19.45 21.75
0.70 1.00 1.15 1.25 1.40 1.65 1.75 2.25 2.50 2.80
Extra sugar
*
*
1.20 1.50 2.00 2.20 2.45 2.95 3.40 3.90 4.35 4.85
0.70 0.85 1.15 1.25 1.40 1.70 1.95 2.25 2.50 2.80
Lightener
*
*
1.55 2.15 2.50 2.75 3.00 3.60 4.20 4.80 5.45 6.05
0.90 1.25 1.45 1.60 1.75 2.10 2.45 2.80 3.15 3.50
Extra lightener
Sugar substitute
Extra sugar substitute
*
*
0.60 0.85 1.00 1.10 1.30 1.50 1.70 1.90 2.20 2.40
0.75 1.05 1.25 1.35 1.60 1.90 2.10 2.40 2.75 3.00
*
*
0.80 1.10 1.30 1.40 1.60 1.90 2.15 2.50 2.80 3.10
1.00 1.35 1.60 1.75 2.00 2.40 2.70 3.10 3.50 3.90
D = Espresso
I = Chocolate times for cappuccino
E = Cappuccino
* The actual gram weight of a product or condiment throw will vary
depending upon the type of product or condiment used. The
weights given are approximate based on factory testing.
* Separate sugar, lightener, and sugar substitute timers are available
* for selections A/B/C/D, E, and F.
July, 2003
30
6730018
Download from Www.Somanuals.com. All Manuals Search And Download.
Set up a Hot Drink
HDC II Programming Guide
COLLECTING HOT WATER THROWS
National Vendors recommends the factory default times be used for hot water
throws to ensure proper mixing. Table W1 gives the factory default water throw
times for the various size cups and product selections.
WARNING
For a non-brewed selection, collect the water throws as follows:
2. Ensure the merchandiser is using the factory defaults for the cup sizes (see
SET UP CUP SIZES, page 23).
3. Initiate the water throw for a selection.
4. Remove the cup and pour the water into a graduated cylinder.
5. Refer to table W1 for the correct volume of water.
6. Adjust the throw time for that selection (see "Set Up A Hot Drink", PAGE
25) and repeat steps 3 through 5 until the correct volume of water is thrown.
7. If you are unable to get the desired amount of water, reset the throw time to
the factory default, then adjust the water valves. You may then readjust the
throw times to fine-tune your water throws.
1. Remove water supply hose from the brewer as shown on the next page.
2. Place the end of the hose in a graduated cylinder.
3. Initiate the water throw for a selection.
4. Remove the cup and pour the water into a graduated cylinder.
5. Refer to table W1 for the correct volume of water.
6. Adjust the throw time for that selection (see "Set Up A Hot Drink", PAGE
25) and repeat steps 3 through 5 until the correct volume of water is thrown.
7. If you are unable to get the desired amount of water, reset the throw time to
the factory default, then adjust the water valves. You may then readjust the
throw times to fine-tune your water throws.
8. Replace the water supply hose on the brewer.
6730018
31
July, 2003
Download from Www.Somanuals.com. All Manuals Search And Download.
HDC II Programming Guide
Set up a Hot Drink
CUP FOR
TAKING
WATER
THROWS
CUP
DELIVERY
STATION
653p0011
Table W1 Water Throw Default Times and Volumes
Time (in seconds) per size cup
Volume (in ml) per size cup
Selection
5 oz 7 oz 8 oz 9 oz 10 oz 12 oz 14 oz 16 oz 18 oz 20 oz
5.00 7.00 8.25 9.00 10.00 12.00 14.00 16.00 18.00 20.00
A
B
A
B
C
D
D
F
Fresh brew coffee
Fresh brew decaf
Freeze dry coffee
Freeze dry decaf
6th Product
135
190
220
240
265
320
375
425
480
535
5.00 7.00 8.25 9.00 10.00 12.00 14.00 16.00 18.00 20.00
135 190 220 240 265 320 375 425 480 535
5.00 7.00 8.25 9.00 10.00 12.00 14.00 16.00 18.00 20.00
125 175 210 225 255 305 355 405 455 505
5.00 7.00 8.25 9.00 10.00 12.00 14.00 16.00 18.00 20.00
125 175 210 225 255 305 355 405 455 505
5.00 7.00 8.25 9.00 10.00 12.00 14.00 16.00 18.00 20.00
110 155 185 200 225 270 315 360 405 450
2.25 3.50 4.15 4.50 5.00 6.00 7.00 8.00 9.00 10.00
62.5 87.5 110 120 133 160 185 210 225 265
2.50 3.50 4.15 4.50 5.00 6.00 7.00 8.00 9.00 10.00
62.5 87.5 105 112.5 127.5 153 175 205 225 255
Espresso (FB)
Espresso (FD)
Tea
5.00 7.00 8.25 9.00 10.00 12.00 14.00 16.00 18.00 20.00
125 175 210 225 255 305 355 405 370 505
5.00 7.00 8.25 9.00 10.00 12.00 14.00 16.00 18.00 20.00
105 145 170 185 205 245 290 330 370 410
G
H
H
X
Chocolate
5.00 7.00 8.25 9.00 10.00 12.00 14.00 16.00 18.00 20.00
115 165 195 210 235 285 330 380 425 475
Soup
5.00 7.00 8.25 9.00 10.00 12.00 14.00 16.00 18.00 20.00
110 155 185 200 225 270 315 360 405 450
Soluble Product
Soluble Product
5.00 7.00 8.25 9.00 10.00 12.00 14.00 16.00 18.00 20.00
110
155
185
200
225
270
315
360
405
450
July, 2003
32
6730018
Download from Www.Somanuals.com. All Manuals Search And Download.
Set up a Hot Drink
HDC II Programming Guide
RECIPES
CAPPUCCINO
Cappuccino is made with various ratios of chocolate to coffee, according to taste.
Lightener (E timer) is also used for cappuccino. For an example, the default
chocolate-to-coffee ratio of 15/85 in a 8.25 oz. cup consists of the following:
•
•
A chocolate throw (DR.2) lasting .65 seconds, providing 15% of the nor-
mal chocolate throw (approximately 5.4 grams*).
A water throw for the chocolate (WA.2) lasting 2.65 seconds (chocolate
product throw plus 2 seconds to ensure the mixing bowl is fully rinsed).
The volume is about 59 ml, depending upon how the flow rate is adjusted.
A throw for cappuccino coffee (product E) equal to a normal coffee (prod-
uct A) throw.
•
•
A water throw for the freeze dry coffee selection (water E) lasting for 5.55
seconds (132 ml).
- OR -
•
A water throw for the fresh brew coffee selection (water E) lasting for 5.55
seconds (153 ml). In either case the water volume is enough to fill the
remainder of the cup.
The actual mixing sequence is as follows:
1. The coffee portion of cappuccino is made using the same canister/valve
combination as the normal (A) coffee.
2. After the coffee is completely in the cup, the chocolate portion is made with
the selection G canister/valve combination. This gives the drink its tradi-
tional "layering".
Chocolate weights will vary with different products
HINTS:
To “fine tune” your Cappuccino drink to your exact taste, set a ratio close to what
you like (between 5% and 50%). Adjust the individual timers using
and
until you are satisfied. You may find it necessary to cut down on the
amount of sweetener available to a cappuccino drink with a high ratio of choco-
late, as the chocolate contains sweetener of its own.
6730018
33
July, 2003
Download from Www.Somanuals.com. All Manuals Search And Download.
HDC II Programming Guide
Set up a Hot Drink
CAFFÉ LATTE
Caffé Latte has a rich, robust coffee flavor. It is a full-bodied hot beverage with
extra creamer, whipped to frothy perfection, with sugar optional. Try this recipe
to expand your gourmet product selections and increase premium pricing oppor-
tunities.
ENTER THE SUPERVISOR CODE:
1. Press
. The display shows:
. You must enter the four-
digit supervisor code within 6 seconds to gain access.
NOTE
in the display.
SET THE MACHINE TO VEND A LARGE "D" SELECTION:
NOTE
Ensure that your machine has been configured for two separate
cup sizes, and that the larger size is 12 oz. See SET UP CUP
SIZES, page 23.
1. Press the following keys:
, then
until the display shows
. Make sure the " " is displayed. If not, press "D" on the
selection switch panel to display the " ".
2. Press
twice to return to the standby message.
July, 2003
34
6730018
Download from Www.Somanuals.com. All Manuals Search And Download.
Set up a Hot Drink
HDC II Programming Guide
SET UP YOUR SELECTION:
1 D 6 or 7 Drink Selection Setup
Large Cup Size
12 OZ
14 OZ
16 OZ
18 OZ
20 OZ
TIME
SEC.
FB / TIME
FD SEC.
FB / TIME
FD SEC.
FB / TIME
FD SEC.
FB / TIME
FD SEC.
FB /
FD
12 cup 320/305 14 cup 375/355 16 cup 425/405 18 cup 480/455 20 cup 535/505
WATER
ml
ml
ml
ml
ml
3.65 13.0/2.2 4.25
gm
15.3/
2.55 gm
4.85
17.5/2.9 5.45
gm
19.6/
3.25 gm
6.05
21.8/
3.65 gm
COFFEE
SUGAR
0.35 2.7 gm 0.40
0.35 2.7 gm 0.40
3.1 gm 0.45
3.1 gm 0.45
3.5 gm 0.55
3.5 gm 0.55
4.25 gm 0.60
4.25 gm 0.60
4.65 gm
4.65 gm
EX
SUGAR
2.90 5 gm
2.90 5 gm
3.35
3.35
5.85 gm 3.85
5.85 gm 3.85
6.7 gm 4.35
6.7 gm 4.35
7.55 gm 4.85
7.55 gm 4.85
8.45 gm
8.45 gm
LIGHT-
ENER
EX
LIGHT-
ENER
12.5
12.5
ON +
12.5
12.5
ON +
12.5
12.5
ON +
12.5
12.5
ON +
12.5
ON +
STEEP
TIME
STEEP +
TIME
WHIP
To get these measurements, see "Collecting Dry Product Gram Throws", PAGE
28, and perform test throws of the dry ingredients. See "Collecting Hot Water
Throws", PAGE 31, and perform test water throws.
6730018
35
July, 2003
Download from Www.Somanuals.com. All Manuals Search And Download.
HDC II Programming Guide
Set up a Hot Drink
EUROPEAN CAPPUCCINO
Introducing a great new blended drink called EUROPEAN CAPPUCCINO:
First, a portion of cappuccino topping mix (or lightener) is dispensed, then lay-
ered on top is a small serving of strong coffee.
1. Replace product in the soup (or international coffee) canister with the light-
ener or cappuccino topping mix.
2. Press
. The display shows:
. You must enter the four-
digit supervisor code within 6 seconds to gain access.
NOTE
A new machine has a factory-set supervisor code of 0000.
When you have entered the right code, you will hear two beeps and see
in the display. Press
.
a. Press
b.
, then press
until the display shows -
.
is the current configuration code, where W = the machine type, X
= 6th product configuration, Y = brewer configuration, and Z = canister
mapping. See “Set the Machine Type and Configuration Code (Supervi-
sor Mode Only)” on page 20. You will be changing the number repre-
sented by X. The only way to do that is to change all four numbers, so
at this time write down your configuration code so you will know where
to start if you make a mistake.
c. Replace "X" as follows:
If your current value of X is:
Change it to:
1
2
3
4
5
6
7
8
For example: If your current configuration code is
numbers . Your new drink will be selected with the H key. Valid selec-
tions are H3 (black) and H4 (with sugar). After the reconfiguration, timers for
the topping mix or lightener are under the H selection as , and the timers for
, you will enter the
the coffee serving are under the H selection. Now, you need to alter the water
throw times for the two selections. Consult Table W1 on page 32 for suggestions
for a starting point for your new drink.
July, 2003
36
6730018
Download from Www.Somanuals.com. All Manuals Search And Download.
Set up a Hot Drink
HDC II Programming Guide
BLENDED SELECTIONS
Two new blended selections are offered with the Y and Z keys. Any two base
products, a primary and secondary, can be blended from 15% to 85% in 5%
increments. The primary product is dispensed first followed by the secondary
creating a 'layer.' To reverse the order dispensed to the cup, invert the primary
and secondary products. The blended drink will support condiments if condi-
ments are valid for either of the base products.
Blended selections are configured in the
list item of the PRODUCT
CONFIG list. The Y and Z keys select the blended selections from the
list. Once the Y or Z key is pressed, you can select the blend selections and the
percentage. The arrow keys toggle between the selection and percentage list
items and the 1 and 2 keys edit the primary and secondary products, respectively.
For example to set up the Y blended selection:
1. Press
then press
until the screen displays
-
.
*
2. Press Y; the screen now displays
#
# . # represents the primary/sec-
ondary products currently selected.
3. Repeatedly press 1 until your selected primary product appears next to
.
(NOTE: the selected secondary product will not be included in the available
primary products list.)
4. Repeatedly press 2 until your selected secondary product appears next to
(NOTE: the selected primary product will not be included in the available
secondary products list.)
5. Press
. The screen displays
.
represents the
** ** **
percentage of the primary and secondary products selected.
6. Press 1 to increase the primary product percentage, or press 2 to increase
the secondary product percentage. (NOTE: the alternate product percent-
age value is automatically changed to total 100%).
6730018
37
July, 2003
Download from Www.Somanuals.com. All Manuals Search And Download.
HDC II Programming Guide
Set up a Hot Drink
VIEW OR SET THE HOT WATER TANK
TEMPERATURE
1. Press
then
until the display shows
° . In this
example, 202° is the water tank temperature setpoint in degrees Fahrenheit.
If a decimal point appears next to the "F", the heater is on.
2. If desired, enter a new setpoint in the accepted range of 149° - 205° F (65°
- 96° C).
NOTE
The lower limit for vending is 20° below setpoint, up to a max-
imum of 180° F (82° C).
3. To change display units (replace the "F" with a "C" for Celsius), press
.
4. CONTINUE.
SET UP LOW TEMPERATURE DISPENSING
1. Press
a.
then press
until the screen displays either
. This causes the machine to operate the same as the previous
Hot Drink Center. For example, with a setpoint temperature of 202º F
the machine will inhibit vending when the water tank temperature falls
below 182º F.
- OR -
b.
. Allows vending to a water tank temperature of 140º F.
2. Press
to change between
and
.
3. CONTINUE.
July, 2003
38
Download from Www.Somanuals.com. All Manuals Search And Download.
6730018
Set up a Hot Drink
HDC II Programming Guide
SET UP LOW POWER SETTINGS
Low power settings allow for the water tank to be set to a lower temperature at up
to 4 different dates and times.
For example, you want to lower the tank temperature to 160º F overnight on
Mondays through Fridays. The machine tank temperature setpoint will be
changed to 160º F at 6:00 pm and maintained at that temperature until 5:00 am on
the following morning when the setpoint is returned to 202º F. Please keep in
mind that at 5:00, the machine will just begin to increase to the 202º F setpoint
temperature. It is up to you to determine how long that will take and to allow
enough time for the tank to be at its proper temperature when the machine will be
used. Typically, one hour is adequate to return to the normal operating tempera-
ture. NOTE: The machine
interval will be determined by how you have set the
condition during the low power
configuration.
1. Press
then press
until the screen displays
- - - - .
Press the number of the time interval you want to edit, or
time interval 1 (we will use interval 1 for this example).
to edit
2. The display shows
or
. This display tells you
whether your time interval (represented by 1) is on or off. Press
change the condition of the time interval.
to
3. If you turn an interval ON, it must be edited. You can edit a time interval
now, then turn it OFF until another time.
4. Press
. The display shows
. X.XX is the currently set
start time. Enter a new start time (24-hour format) for this interval. To
enter the time for 6:00 pm, enter 1800.
5. Press
. The display shows
X.XX is the currently set
stop time. Enter a new stop time (24-hour format) for this interval. To enter
the time for 5:00 am, enter 0500.
6. Press
. The display shows @ - - - - - - - . The dashes represent the
days that this time interval is active. Pressing number keys 1 through 7
switches the days on/off. 1=sunday, 2=monday, etc. For example, press "2",
“3”, "4", “5”, and "6". The display now shows
@ -
-. This interval is active on Monday through Friday.
6730018
39
Download from Www.Somanuals.com. All Manuals Search And Download.
July, 2003
HDC II Programming Guide
Set up a Hot Drink
7. Press
. The display shows
or
"OFF"
means there is no custom message selected, and "X" represents the custom
message number set for this interval. Press the number key of the message
(1 through 8) you want displayed. To edit this message, press
and
follow the procedure given in EDIT CUSTOM MESSAGE (page 49).
Press 0 to turn the message OFF for this time interval.
8. Press
. The display shows
.
9. Press 1, 6, and 0. The screen displays
.
10. CONTINUE.
SET THE AUTOMATIC BREWER RINSE TIME
(BREWER EQUIPPED MACHINES ONLY)
The brewer will be automatically rinsed by one of two methods: You can specify
a set time of day when the brewer is rinsed, or you can specify that rinsing takes
place a set time after the last brewed selection is vended.
1. Press
then
until the display shows one of the following:
The time of day (in hours and tenths of hours) the machine
rinses the brewer. In this example, brewer rinse takes place each day at 4:30
am. Range: 0.0 - 23.9 in .1 hour (6 minute) increments.
- OR -
. In this example, brewer rinse takes place 2.5 hours after the
last vend. Range: 2.0 - 12.5 hours, in .1 hour (6 minute) increments.
NOTE
If 24 hours passes without a vend, no rinsing will take place.
This eliminates unnecessary rinsing over a weekend or holiday.
2. Whichever one of the two choices is displayed is the method by which the
brewer will be rinsed. Press
Enter a new time, if desired.
to switch between these two displays.
3. CONTINUE.
July, 2003
40
Download from Www.Somanuals.com. All Manuals Search And Download.
6730018
Set up a Hot Drink
HDC II Programming Guide
SET THE BOWL RINSE TIME
Mixing bowl(s) can be automatically rinsed by one of two methods: You can
specify a set time of day when the bowl is rinsed, or you can specify that rinsing
takes place a set time after the last selection is vended.
1. Press
then
until the display shows one of the following:
- This is how soon the machine rinses the bowls after a vend.
In this example, bowl rinse takes place 2.5 hours after the last vend. Range:
2.0 - 12.5 hours, in .1 hour (6 minute) increments.
- OR -
- The time of day (in hours and tenths of hours) the machine
rinses the bowls. In this example, bowl rinse takes place at 4:30 am.
Range: 0.0 - 23.9 in .1 hour (6 minute) increments.
NOTE
If 24 hours passes without a vend, no rinsing will take place.
This eliminates unnecessary rinsing over a weekend or holiday.
- OR -
- No bowl rinse takes place.
2. Press
to switch between these options, and the number keys to enter
new values.
3. CONTINUE.
6730018
41
Download from Www.Somanuals.com. All Manuals Search And Download.
July, 2003
HDC II Programming Guide
SureVend Configuration
TURN SUREVEND™ ON OR OFF
SureVend Configuration
1. Press
then
until the display shows one of the following:
: None of the SureVend™ functions are available. Use this if
the SureVend™ system is not installed, or there is some reason you do not
want to use it (for example in a high cup theft situation).
. The SureVend™ system is operative. All of the SureVend™
functions are available.
2. Press
3. CONTINUE.
to switch between the two choices.
OPTIONAL OR MANDATORY SUREVEND™
then until the display shows one of the following:
: The machine reverts to home switch operation of the ring
1. Press
’
motors if the SureVend™ system cannot operate normally because of an
obstruction in the cup station or for any other reason.
: The vending machine is operational only if the SureVend™
system is determined to be working. Otherwise, the machine will go tem-
porarily out of service until the blockage or other error is corrected.
2. Press
to switch between the two choices.
3. CONTINUE.
July, 2003
42
6730018
Download from Www.Somanuals.com. All Manuals Search And Download.
SureVend Configuration
HDC II Programming Guide
SET UP THE SUREVEND™ ANTI-JACKPOT TIMER
1. Press
then until the display shows . XX
represents how many minutes SureVend™ will be disabled for either cup
ring. The same value applies to the two timers (one on each ring).
2. Enter a number using either keypad.
If any cup ring motor fails to deliver a cup on two consecutive attempts, the
cup ring goes out of service. After the time set in step 2 has elapsed, the
cup ring goes back in service and is given one more chance to deliver a cup.
If cup delivery is again unsuccessful, the ring goes out of service until the
machine is serviced. A successful delivery on any cup ring will reset the
failed attempts for that particular cup ring. If both cup rings perform three
consecutive failed attempts (and the SureVend™ sensor is determined to be
working), the entire machine goes in the "mug only" mode until the
machine is serviced. If either cup ring performs three consecutive failed
attempts with the other cup ring in anti-jackpot timer mode, the entire
machine will be in "mug only" mode (assuming SureVend is working) until
the preset time elapses (one more attempt will be made to deliver a cup) or
the machine is serviced by a route operator.
NOTE
A setting of
will disable this feature. A setting of
will
disable the ring until the next service call.
CONDITIONS:
If the cup sizes are the same, the machine alternates ring motor cycles until
either a cup is detected or both rings reach two consecutive failed attempts.
If the cup sizes are different, the selected ring is cycled up to two times
before returning credit. If the customer selects a large size drink and that
ring is out of service, the customer gets a small drink (if in service) and
receives change.
VIEW SOFTWARE VERSION
1. Press
"XXXXXX" represents the current software version number.
2. CONTINUE.
, and press
until the display shows
.
6730018
43
July, 2003
Download from Www.Somanuals.com. All Manuals Search And Download.
HDC II Programming Guide
Setup Time
SET THE TIME OF DAY
Setup Time
1. Press
. The display shows
. "HH.MM" is the time of
day in 24-hour format.
2. Enter the current time using the number keys.
NOTE
9:00 am is entered with a leading zero, like this: 0900; 9:00
pm is entered as 2100.
3. CONTINUE.
SET MONTH, DATE, AND YEAR
, and press until the display shows
1. Press
.
"MM" is the month, "DD" is the date, YY is the year, X is the day of the
week (1=sunday, 2=monday, etc.)
2. Enter the current month, date, and year using the number keys.
For example, press the following keys to enter February 15, 2002:
0, 2, 1, 5, 0, 2
Once a date is entered, the day of the week will automatically adjust to the
correct day.
3. Press
to switch between MM/DD and DD/MM formats
4. CONTINUE.
SET DAYLIGHT SAVINGS OPTION
1. Press
2. Press
, then press
until the display shows something like:
to select the appropriate option for your machine. The
options are:
(North America),
.,
,
.
3. CONTINUE.
July, 2003
44
Download from Www.Somanuals.com. All Manuals Search And Download.
6730018
Setup Time
SET TIME-OF-DAY INHIBIT VENDING
Vending can be inhibited up to four times a day.
1. Press
, then press
until the display shows
- - - -.
time-of-day inhibited vending.
SET TIME-OF-DAY FREE VENDING
1. Press
, then press
until the display shows
- - - -.
time-of-day free vending.
SET TIME-OF-DAY DISCOUNT VENDING
1. Press
, then press
until the display shows
- - - -.
2. See "Time Interval Editing", PAGE 46 for an example of how to set up
time-of-day discount vending.
6730018
45
July, 2003
Download from Www.Somanuals.com. All Manuals Search And Download.
HDC II Programming Guide
Setup Time
TIME INTERVAL EDITING
You can select up to four times of day for each special vending period.
NOTE
If two or more of these time periods overlap, the interval with the
highest priority will overrule the other(s). This order of precedence is:
1. INHIBIT
2. FREEVEND
3. DISCOUNT
For example, if a DISCOUNT time period is scheduled for a certain
area before the end of an INHIBIT time period, DISCOUNT does not
begin until the INHIBIT interval has ended for that area.
The time interval editing procedure is almost the same for the INHIBIT, FREEV-
END, and DISCOUNT intervals. There is one difference (Step 3 below) for the
DISCOUNT time interval, so we will use it in our example. Assume you just fin-
ished the "Set Time-of-Day Discount Vending", PAGE 45 procedure. Step 1
picks up where you left off . . .
1. The display shows
want to edit, or
- - - - . Press the number of the time interval you
to edit time interval 1 (we'll use interval 1 for this
example).
2. The display shows
or
This display tells you
whether your time interval (represented by 1) is on or off. Press
change the condition of the time interval.
to
NOTE
If you turn an interval ON, it must be edited. You can edit a
time interval now, then turn it OFF until another time.
3. Press
. The display shows
. "X" represents the discount
percentage for this period. Enter a discount percentage of 25 with the num-
ber keys. (Discount percentages of from 0 to 99 are permitted.) The
machine will apply a 25% discount to each price, rounding up to the nearest
nickel (or whatever is the smallest coin accepted by the coin mechanism).
4. Press
. The display shows
X.XX is the currently set
start time. Enter a new start time (24-hour format) for this interval. To
enter the time for 3:30 pm, enter 1530.
July, 2003
46
6730018
Download from Www.Somanuals.com. All Manuals Search And Download.
Setup Time
HDC II Programming Guide
5. Press
. The display shows
. X.XX is the currently set
stop time. Enter a new stop time (24-hour format) for this interval. To enter
the time for 6:00 pm, enter 1800. You have now established a 25% discount
that starts at 3:30 pm and ends at 6:00 pm.
6. Press
. The display shows @ - - - - - - - . The dashes represent the
days that this time interval is active. Pressing number keys 1 through 7
switches the days on/off. For example, press "2", "4", and "6". The display
now shows
@ -
-
- -. This discount interval is only active on Monday, Wednes-
day, and Friday.
7. Press
. The display shows - - - - - - - - - . The dashes represent
*
the products affected by this time interval. Press the appropriate letter key
to enable a product, press the key again to disable it. For example, pressing
A, C, and E will cause the display to look like this:
-
-
- - - -_, mean-
ing that all A, C, and E selections are affected by this interval.
Press
to turn on all levels; press
. The display shows
to turn all levels off.
8. Press
or
"OFF"
means there is no custom message selected, and "X" represents the custom
message number set for this interval. Press the number key of the message
(1 through 8) you want displayed. To edit this message, press
and
follow the procedure given in EDIT CUSTOM MESSAGE, page 49.
Press 0 to turn the message OFF for this time interval.
9. CONTINUE.
STANDBY
MESSAGE
The message that is displayed during normal vend-
ing periods when there are no out-of-service faults
on the machine.
6730018
47
Download from Www.Somanuals.com. All Manuals Search And Download.
July, 2003
HDC II Programming Guide
Messages
SELECT A STANDBY MESSAGE
Messages
1. Press
.
"XX" represents the current message number selected for the standby mes-
sage. Two dashes mean that the factory-set message is selected.
2. To select a message, just press the corresponding number (1 through 8). To
display the factory-set message, press 0.
3. The selected message (except the factory-set message) can be edited. To do
this, press and follow the procedure given in EDIT CUSTOM MES-
SAGE, page 49.
4. CONTINUE.
SELECT AN OUT-OF-SERVICE MESSAGE
1. Press
, then press
until the display shows
.
machine is out-of-service. Two dashes mean that the factory-set message is
selected.
2. To select a message, just press the corresponding number (1 through 8). To
display the factory-set message, press 0.
3. The selected message (except the factory-set message) can be edited. To do
this, press and follow the procedure given in EDIT CUSTOM MES-
SAGE, page 49.
4. CONTINUE.
SELECT A FREEVEND MESSAGE
1. Press
, then press
until the display shows
. "XX"
plays when the machine is in the freevend mode. Two dashes mean that the
factory-set message is selected.
2. To select a message, just press the corresponding number (1 through 8). To
display the factory-set message, press 0.
3. The selected message (except the factory-set message) can be edited. To do
this, press and follow the procedure given in EDIT CUSTOM MES-
SAGE, page 49
4. CONTINUE.
July, 2003
48
6730018
Download from Www.Somanuals.com. All Manuals Search And Download.
Messages
HDC II Programming Guide
EDIT CUSTOM MESSAGE
, then press until the display shows
1. Press
' . Press
is displayed (X
the number of the message you want to edit.
represents the message number you pressed).
NOTE
Custom message 8 represents the
message.
2. Press
flashing.
. The message text is displayed with the first character
3. To view the message, press
. The message scrolls across the
.
display. To stop the scrolling, press
4. When the character you want to change is flashing, either enter it directly,
or use and to step through the character set until the desired
character is displayed. Use the arrow keys to highlight different charac-
ters. See the section on the next page for an explanation of special keys and
the character set.
SHORTCUT
Instead of stepping through the whole character set to enter a letter
that is not on your keypad, enter one close to the one you want, then
step to it. Example: If you want to enter an L, first press
,
then press
six times. Your L should now be displayed.
THE END OF MESSAGE CHARACTER
This is the most important character in your message, because it
tells the machine when the message is ended. If you don't use this
character, your message will be followed by a bunch of zeros. This
character can be selected either from the character set or by a direct
key entry (see "ENTERING YOUR MESSAGE", PAGE 50).
6730018
49
July, 2003
Download from Www.Somanuals.com. All Manuals Search And Download.
HDC II Programming Guide
Messages
ENTERING YOUR MESSAGE
Most of the keys on the control panel have a special purpose to help you create
and edit your messages:
Inserts an R at the flashing
character.
Inserts a space at the flashing
character.
Inserts an S at the flashing
character.
Deletes the current character
and closes up the space.
Inserts a T at the flashing
character.
Deletes the current character
and leaves the space.
Enters the special "end of
message" character, which
denotes the end of the mes-
sage.
Repeats the letter to the left of
the flashing character.
"Pages" through the message, ten characters (one screen) at a time.
Steps forward and backward through the message, one charac-
ter at a time.
Steps forward and backward through the character list, one
character at a time.
(SPACE)
July, 2003
50
6730018
Download from Www.Somanuals.com. All Manuals Search And Download.
Check the Setup
VIEW WATER TANK TEMPERATURE
Check the Setup
1. Press
. The display shows
°
. "XXX" is the current water
tank temperature. "° F" means that the temperature is displayed in degrees
Fahrenheit (may be shown in degrees Celsius, depending upon your choice.
See "View or Set the Hot Water Tank Temperature", PAGE 38). A decimal
point shown in the display indicates that the tank heater is operating.
2. CONTINUE.
VIEW MACHINE TYPE/CONFIGURATION SETTING
, then press until display shows
1. Press
then press
until the display shows -
-
. P, Q, R, and S rep-
resent settings specific to your machine. See "SET THE MACHINE TYPE
AND CONFIGURATION CODE (SUPERVISOR MODE ONLY)",
PAGE 20 for an explanation of this display.
2. CONTINUE.
6730018
51
July, 2003
Download from Www.Somanuals.com. All Manuals Search And Download.
HDC II Programming Guide
Check the Setup
VIEW CUP SIZES ASSIGNED TO SELECTIONS
1. Press
, then press
until the display shows
- - - - - -.
This example shows that regular size cups are assigned to selections C & G.
NOTE
Press
to display the remaining selections:
- - - - - - -
NOTE
If you have only one cup size in your machine, you will not see
the next display.
2. Press
. The display shows
- -
. This example shows that
large size cups are assigned to selections A thru C and F thru H.
NOTE
Press
to display the remaining selections:
- - - - - - -
3. CONTINUE.
PAYOUT COINS
. If a dumb mech was selected, the display shows
1. Press
2. Press
; if
an MDB mech was selected the display shows
.
. A dumb mech pays out one Nickel; an MDB mech pays a
coin from tube 1. Press
. A dumb mech pays out one Dime; an
MDB mech pays a coin from tube 2. Press
. A dumb mech pays out
one Quarter; an MDB mech pays a coin from tube 3.
3. To continuously pay out coins, hold down the appropriate key.
4. CONTINUE.
July, 2003
52
6730018
Download from Www.Somanuals.com. All Manuals Search And Download.
View Machine Data
HDC II Programming Guide
SET PRICES
1. Press
. The display shows something like
. This dis-
**
play shows the maximum and minimum prices set in the machine. In this
example, the maximum price is $2.50 and the minimum is $0.25.
2. Enter prices using one of the following methods:
SET ENTIRE MACHINE TO ONE PRICE . . .
a. Press
. The display shows
. Enter a price using the
**
number keys. All selections in the machine are now set to this price.
SET THE PRICE OF AN INDIVIDUAL SELECTION:
a. Press the number and letter of the selection to be priced.
(for example: 1A) The display shows
. Enter a price using the
number keys. The price for 1A (product A, large cup) is set.
b. Press
. The display shows
Enter a price for 1B
(product B, large cup) using the number keys.
c. Press
to toggle through and set prices for each selection in turn.
You can also enter the number and letter for a specific selection (this
avoids scrolling through the entire selection list).
4. CONTINUE.
VIEW NONRESETTABLE SALES AND VEND DATA
View Machine Data
1. Press
. The display shows
. "XX.XX" is a dollar and
cents figure showing the total of all sales in the machine. This is a running
total, and is not resettable.
2. Press
made by the machine. This is a running total, and is not resettable.
3. CONTINUE.
. The display shows
. "X" is the total number of vends
6730018
53
July, 2003
Download from Www.Somanuals.com. All Manuals Search And Download.
HDC II Programming Guide
View Machine Data
VIEW DATA FOUR DIFFERENT WAYS
Paid sales and vends can be viewed four different ways:
1.
2.
3.
4.
- Total Paid Sales for the machine
- Total Sales by Drink Size
**
*
*
- Total Sales by Selection (both sizes)
- Total Sales by Individual Selection.
See next four sections for details.
VIEW TOTAL PAID SALES
1. Press
, then press
until the display shows
**
"XX.XX" is a dollar and cents figure showing the total of all PAID sales in
the machine (as opposed to unpaid sales like winner and free vends). This
is the total since the last time it was cleared.
2. CONTINUE.
VIEW TOTAL SALES BY DRINK SIZE
, then press until the display shows
1. Press
**
2. Press The display will read *
small cup size.
. XX.XX is the total sales for the
3. Press
to see the total sales of the larger cup size.
4. CONTINUE.
July, 2003
54
Download from Www.Somanuals.com. All Manuals Search And Download.
6730018
View Machine Data
HDC II Programming Guide
VIEW TOTAL SALES BY SELECTION (BOTH CUP
SIZES)
1. Press
, then press
until the display shows
**
2. Press . The display will read *
. XX.XX will be the total sales,
for both the large cup and small cup for selection A,
3. Press
4. CONTINUE.
to cycle through all available selections.
VIEW TOTAL SALES BY INDIVIDUAL SELECTION
1. Press
, then press
until the display shows
**
2. Press and . The display will read
sales, for selection A, small cup.
. XX.XX will be the total
3. Press
. The display will show
Press
repeatedly
to cycle through the total sales of each small cup selection. Continue press-
ing
to view the total sales of each large cup selection.
4. CONTINUE.
VIEW TOTAL PAID SALES BY PRICE LINE
1. Press
2. Press
, then press
until the display shows
**
. The display shows
’
. This is an example of a
price line for items priced at $0.30. The amount following the apostrophe
(‘), is the total dollar amount of the sales for this amount. In this example,
there was total sales of $3,430.50 for the $0.30 item.
3. Press
repeatedly to view all price lines.
4. CONTINUE.
6730018
55
July, 2003
Download from Www.Somanuals.com. All Manuals Search And Download.
HDC II Programming Guide
View Machine Data
VIEW TOTAL PAID VENDS
1. Press
, then press
until the display shows
"XX" is
**
the total number of paid vends for the entire machine.
2. If desired, view this data by individual selection or drink size.
3. CONTINUE.
VIEW TOTAL PAID VENDS BY PRICE LINE
1. Press
2. Press
, then press
until the display shows
**
. The display shows
’
. This is an example of a price
line for items priced at $0.30. The amount following the apostrophe (‘), is
the total number of sales for this amount. In this example, there was a total
of 11,435 sales of the $0.30 item.
3. Press
4. CONTINUE.
repeatedly to view all price lines.
CLEAR ALL RESETTABLE DATA
1. Press
. The display shows
. This is a running total, and
is not resettable.
2. Press and hold
momentarily, and then changes to
3. CONTINUE.
. Two beeps sound and the display shows
. All data is cleared.
July, 2003
56
Download from Www.Somanuals.com. All Manuals Search And Download.
6730018
View Machine Data
HDC II Programming Guide
CLEAR PAID SALES DATA ONLY
1. Press
, then press
until the display shows
**
"XX.XX" is a dollar and cents figure showing the total of all PAID sales in
the machine (as opposed to unpaid sales like winner and free vends). This
is the total since the last time it was cleared.
2. Press and hold
. Two beeps sound and the display shows
momentarily, and then changes to
other data is not cleared.
. All paid sales data is cleared;
3. CONTINUE.
VIEW AMOUNT IN COIN BOX
(NOT SHOWN IF ZERO)
1. Press
, then press
until the display shows
.
"XX.XX" is the dollar and cents amount in the coin box.
2. To clear the amount in the coin box, Press and hold
. Two beeps
sound and the display shows
.
momentarily, and then changes to
WARNING
To ensure the coin box total is accurate, make sure to clear the
coin box total every time you empty it and do not clear this
total unless you also empty the coin box.
3. CONTINUE.
6730018
57
July, 2003
Download from Www.Somanuals.com. All Manuals Search And Download.
HDC II Programming Guide
View Machine Data
VIEW AMOUNT IN VALIDATOR
(NOT SHOWN IF ZERO)
1. Press
, then press
until the display shows
.
"XX.XX" is the dollar amount in the bill stacker.
2. Press
to show the quantities of bills in the stacker. For example, the
, meaning that there are 20 dollar bills in the bill
display shows
stacker. Press
$5s, $10s, or $20s.
3. CONTINUE.
again to show the quantities of other bills, such as
VIEW FREEVEND SALES BY TIME INTERVAL
(NOT SHOWN IF ZERO)
1. Press
2. Press
, then press
until the display shows -
.
, then press
until the display shows
. This is
the total sales for freevend interval 1, shown even if zero.
3. Press
to view intervals 2 through 4.
4. CONTINUE.
July, 2003
58
6730018
Download from Www.Somanuals.com. All Manuals Search And Download.
View Machine Data
HDC II Programming Guide
VIEW DISCOUNT SALES BY TIME INTERVAL
(NOT SHOWN IF ZERO)
1. Press
2. Press
, then press
until the display shows
**
. The display shows
. This is the total sales for dis-
count interval 1.
3. Press
to view intervals 2 through 4.
4. CONTINUE.
VIEW FREE VENDS
(NOT SHOWN IF ZERO)
1. Press
2. Press
, then press
until the display shows -
.
, then press
until the display shows
.
"XX.XX" is the total machine-wide freevends, shown even if zero.
3. CONTINUE.
VIEW WINNERS
(NOT SHOWN IF ZERO)
1. Press
2. Press
, then press
until the display shows -
.
, then press
until the display shows
"XX.XX" is the total machine-wide winners, shown even if zero.
3. CONTINUE.
6730018
59
July, 2003
Download from Www.Somanuals.com. All Manuals Search And Download.
HDC II Programming Guide
View Machine Data
VIEW TIME DATA
1. Press
2. Press
, then press
until the display shows
.
. Something similar to the following message scrolls across
the display:
This example shows the latest time interval the main (machine) door was
open ( ). It was open for 237 minutes, and was opened on January 30 (
) at 10:13 am (
). Press
. If applicable, similar displays will
appear for intervals 2, 3, and 4. Otherwise, go to the next step.
3. Press
. The following message scrolls across the display:
This example shows that the last time the machine lost power was on Janu-
ary 30 (
(
) at 1:51pm (
) for zero days, zero hours, and 23 minutes
).
4. Press
. The following message scrolls across the display:
This example shows that the longest time the machine was without power
was on January 30 (
47 minutes (
) at 10:58am (
) for zero days, 2 hours and
).
5. Press
. The following message scrolls across the display:
This example shows that the last time resettable sales was fully cleared was
on January 30 ( ) at 8:58am ( ).
6. Press
. The following message scrolls across the display:
This example shows that the last time the time or date was set was on Janu-
ary 30 ( ) at 9:15 am ( ).
July, 2003
60
Download from Www.Somanuals.com. All Manuals Search And Download.
6730018
View Machine Data
HDC II Programming Guide
7. Press
. The following message scrolls across the display:
This example shows that the last time prices were set was on January 30
(
) at 9:42 am (
).
8. Press
. The following message scrolls across the display:
This example shows that the last vend for selection 0A was on January 23 at
4:51 am.
Press
to scroll through the last vend times for each selection.
9. CONTINUE.
VIEW TOTAL UNPAID SALES
(NOT SHOWN IF ZERO)
1. Press
, then press
until the display shows
.
"XX.XX" is the total unpaid sales (free vends, winner vends, 100% dis-
counts, zero price vends) for the entire machine.
2. If desired, view this data by tray and individual selection.
3. CONTINUE.
VIEW TOTAL UNPAID VENDS
(NOT SHOWN IF ZERO)
1. Press
, then press
until the display shows
"XX" is
the total number of unpaid vends for the entire machine.
2. If desired, view this data by tray and individual selection.
3. CONTINUE.
6730018
61
Download from Www.Somanuals.com. All Manuals Search And Download.
July, 2003
HDC II Programming Guide
View Machine Data
VIEW NUMBER OF TEST VENDS
(NOT SHOWN IF ZERO)
1. Press
, then press
until the display shows
. "X" is the
number of test vends.
2. If desired, view this data by product and individual selection.
3. CONTINUE.
VIEW NUMBER OF MUG VENDS
(NOT SHOWN IF ZERO)
1. Press
, then press
until the display shows
. "X" is
the number of mug vends.
2. If desired, view this data by tray and individual selection.
3. CONTINUE.
VIEW NUMBER OF ALT VENDS
(NOT SHOWN IF ZERO)
An ALT VEND occurs when a smaller cup size is unavailable and the machine
vends the smaller selection by using a larger cup. The customer will get the larger
cup, but receive the smaller volume of product (at the small cup price). To view
the number of ALT VENDS,
1. Press
, then press
or
until the display shows
. The “X” is the number of larger cups used to fill smaller
selections.
2. CONTINUE.
VIEW MACHINE ID NUMBER
1. Press
, then press
or
until the display shows
. The X's represent the 6-digit machine ID number.
2. You can edit the machine ID number if the supervisor access code has been
previously entered (see "Gain Access To The Supervisor Mode", PAGE 7).
3. CONTINUE.
July, 2003
62
6730018
Download from Www.Somanuals.com. All Manuals Search And Download.
View Machine Data
HDC II Programming Guide
VIEW CUP RING CYCLES RELATED TO SUREVEND™
(NOT SHOWN IF ZERO)
1. Press
, then press
until the display shows
. XX
represents the number of vends during which more than one ring cycle was
required to successfully dispense a cup.
2. Press
3. CONTINUE.
to clear the count.
VIEW TIMES NO CUP WAS DETECTED AFTER A CUP
RING CYCLED
(NOT SHOWN IF ZERO)
1. Press
, then press
until the display shows
. XX
represents the number of times a cup was not detected after ring 1 cycled.
Check the cup ring adjustment (see the Operator’s Guide), or the cup stack
for damage if the count is excessive.
2. Press
to clear the count.
3. Press
until the display shows
. XX represents the num-
ber of times a cup was not detected after ring 2 cycled. Check the cup ring
adjustment (see the Operator’s Guide), or the cup stack for damage if the
count is excessive.
4. CONTINUE.
VIEW HOME SWITCH USAGE RELATED TO
SUREVEND™
(NOT SHOWN IF ZERO)
1. Press
, then press
until the display shows
. XX
represents the number of times home switches were used due to
’
selected but not working.
2. CONTINUE.
6730018
63
July, 2003
Download from Www.Somanuals.com. All Manuals Search And Download.
HDC II Programming Guide
Test the Machine
TEST VEND SELECTIONS AND VERIFY CREDIT
ADDED
Test the Machine
1. Press
. The display shows
. You may now test vend selec-
tions. If you insert money into the machine, the zeros in the display will be
replaced with the amount of the credit. After the item vends, your money
will be returned.
NOTES
SureVend™ is not operational during a test vend. You may make one
more test vend if you close the door while still in TEST VEND mode.
2. CONTINUE.
TEST DROP A CUP
1. Press
2. Press
, then press
until the display shows
.
to drop a cup.
3. CONTINUE.
TEST THE AUTOMATIC DELIVERY DOOR
, then press until the display shows
1. Press
.
2. Press
. The automatic delivery door operates.
3. CONTINUE.
TEST THE WHIPPER(S)
, then press until the display shows
1. Press
.
2. Press the number key that corresponds to the whipper you want to test. It
will run for one cycle.
3. CONTINUE.
July, 2003
64
6730018
Download from Www.Somanuals.com. All Manuals Search And Download.
Test the Machine
HDC II Programming Guide
TEST THE GRINDER(S)
1. Press
, then press
until the display shows
.
2. Press the number key that corresponds to the grinder you want to test. It
will run for one cycle.
3. CONTINUE.
TEST THE AIR
1. Press
, then press
until the display shows
.
2. Press
to run the air compressor.
3. CONTINUE.
TEST THE BREWER
, then press
1. Press
until the display shows
.
NOTE
Keep away from the brewer mechanism while it is operating.
Coming into contact with moving parts could injure you.
2. Press to test each brewer position:
=The brewer is in the BREW POSITION.
=The brewer is in the HOME position.
3. CONTINUE.
RINSE THE MIXING BOWLS
1. Press
2. Press
, then press
until the display shows
.
to rinse the mixing bowls. The display shows
until
the operation is complete.
3. CONTINUE.
6730018
65
July, 2003
Download from Www.Somanuals.com. All Manuals Search And Download.
HDC II Programming Guide
Test the Machine
RINSE THE BREWER
1. Press
2. Press
, then press
until the display shows
.
to rinse the brewer. The display shows
until the oper-
ation is complete.
3. CONTINUE.
TEST SWITCHES OR SENSORS
1. Press
, then press
until the display shows
.
2. Actuate each switch or sensor to test its function:
M = mug/cup sensor (if equipped)
P = waste pail switch
L = low water tank level switch
2 = ring 2 cup sensor switch
K = freevend keyswitch
H = high water tank level switch
1 = ring 1 cup sensor switch
As you actuate each input, the display element representing that switch
blinks on. Releasing the switch causes that element to blink off again.
3. CONTINUE.
VIEW SUREVEND™ LAST RECORDED
CALIBRATION VALUE
1. Press
SureVend until the display shows
. XXX can be
any number from 0 to 255, and represents the most recent value read from
the sensor. The lower the number the greater the sensor blockage. A num-
ber of 255 means that there is a fatal problem with the SureVend™ interface
board. Ensure the SureVend™ interface PCB is properly connected to the
main controller PCB.
2. CONTINUE.
July, 2003
66
6730018
Download from Www.Somanuals.com. All Manuals Search And Download.
Test the Machine
HDC II Programming Guide
VIEW SUREVEND™ AVERAGE CALIBRATION
VALUE
1. Press
, then press
until the display shows
.
XXX represents the average sensor calibration value (should be between 50
and 255 for proper sensor operation - i.e. 51 through 254). Although this
number could go as low as 20, the SureVend™ system will be inoperative
in this condition.
2. CONTINUE.
CLEAR TANK ERRORS AND FILL THE TANK
, then press until the display shows
1. Press
2. Press
.
. This clears any tank error and starts filling the tank, if neces-
sary. If it is taking a long time to fill the tank AND THERE ARE NO
LEAKS, you may see in the diagnostic list again. Just press
again after making sure there are no other problems, such as a
restriction in the water inlet line or a clogged water filter.
3. CONTINUE.
TEST THE DISPLAY
1. Press
, then press
until the display shows
. The
"DRINK BEING SERVED" lamp is lighted (if so equipped), and remains
lighted until you leave this function.
2. Press
to light all display segments; press
to turn them off.
3. Pressing a NUMBER KEY on the control panel causes all segments to dis-
play that character.
4. CONTINUE.
6730018
67
July, 2003
Download from Www.Somanuals.com. All Manuals Search And Download.
HDC II Programming Guide
Test the Machine
VIEW DIAGNOSTIC MESSAGES
1. Press
. The display shows any of the following diagnostic mes-
sages, depending upon any fault(s) present:
None of the following errors are detected:
Key(s) x, y stuck.
Error in the programming EPROM. Machine will not operate.
RAM is not initialized or is not compatible with the currently
loaded software. If this message appears, initialize your RAM
by performing the following procedure:
NOTE: Initializing RAM will erase all your data and
drink settings. Be sure you have written this
information down before continuing.
Press AND HOLD
display shows
until two beeps are heard, and the
.
All selection keys are locked out.
The keyswitch input is active and configured as an inhibit.
Machine type error displays machine type screen.
NOTE: This is the actual machine type screen. You may enter
the correct machine type number directly on this screen with-
out further action.
Configuration error; displays the machine configuration
screen. NOTE: this is the actual config screen. You may enter
the correct config number directly on this screen without fur-
ther action. (Verify cup size and product times in the product
configuration screen.
Tank failed to fill or refill.
The cup ring is jammed.
Cup turrets are jammed
Out of cups.
The brewer is jammed.
The waste pail is full.
The water level in the tank is low.
Water in the tank is too cold to vend.
Temperature sensor failed or missing.
Float sensor failed or missing.
July, 2003
68
6730018
Download from Www.Somanuals.com. All Manuals Search And Download.
Test the Machine
HDC II Programming Guide
Whipper motor failure (motor 1, 2, 3, 4, 5).
The automatic delivery door is jammed.
Coin mech not detected - machine will not operate if config-
ured for coin mech.
Incomplete coin mech communications — check harness.
Coin mech reporting a bad tube sensor — replace mech.
Replace the coin mechanism.
There is a problem with the coin mech.
Coin mechanism acceptor section is unplugged from the main
body of the coin mech. Connect the cable and cycle machine
power OFF and then ON.
One or more coin tubes are jammed. Pay a coin from each
tube until the jam is cleared.
Incomplete card reader communications (card reader is not
operational).
Card reader reporting error — machine will not operate if
configured for DEBIT ONLY.
Bill validator reporting error — machine will not operate.
Empty stacker, clear jams, etc.
The merchandiser is telling the bill validator not to accept any
bills. Check the enabled channels of the bill validator.
Incomplete bill validator communications — check harness.
One of the motors has failed. The unit will disable itself until
the error is corrected. Check for bill stuck in the acceptance
path. If no bill is present, replace the validator. Cycle
machine power OFF and then ON.
One of the sensors in the bill validator has failed. The unit
will disable itself until the error is corrected. Check for bill
stuck in the acceptance path. If no bill is present, replace the
validator. Cycle machine power OFF and then ON.
A bill is jammed in the acceptance path. The unit will disable
itself until the error is corrected. Remove bill stuck in the
acceptance path. Cycle machine power OFF and then ON.
The stacker is open or removed. The unit will disable itself
until the error is corrected. Install the stacker correctly.
Price error detected and changed to maximum - check prices.
all selections are reported out of service.
Cup ring 1 is out of service due to a SureVend™ error.
Cup ring 2 is out of service due to a SureVend™ error.
6730018
69
July, 2003
Download from Www.Somanuals.com. All Manuals Search And Download.
HDC II Programming Guide
Test the Machine
SureVend™ is ON but not working. The last calibration sam-
ple was 255. Check that the SureVend™ PCB is present at
J34.
SureVend™ is ON but not working. The last calibration sam-
ple was ≤50. Check for a blocked sensor or disconnected har-
ness.
SureVend™ is active and ring 1 anti-jackpot timer is ON. XX
is a value between 1 and 99 in minutes.
SureVend™ is active and ring 2 anti-jackpot timer is ON. XX
is a value between 1 and 99 in minutes, and represents the
amount of time left on the anti-jackpot timer for this cup ring.
Brewer filter paper is empty.
Brewer is missing or malfunctioning.
The brewer is in an incorrect position.
The brewer has not reached an appropriate position within a
certain timeout period. Check for a physical jam or a motor
stall condition.
The brewer is clamped and not vending, or is not in a brewer
test mode. Close the door (if open), or run a brew test.
DOWNLOAD DATA TO A PDCD
operating instructions.
2. Press
. Data is downloaded into your PDCD.
NOTE
Depending upon the setting selected in "Set Printer or DEX Options",
PAGE 10, data may be cleared after the download is complete.
3. CONTINUE.
July, 2003
70
6730018
Download from Www.Somanuals.com. All Manuals Search And Download.
Test the Machine
HDC II Programming Guide
SET FREEVEND OPTIONS
1. Press
, then press
until one of the following is displayed:
- Normal vending mode. No items are on freevend. (A closure
on the optional keyswitch input causes the machine to go out of service.)
- OR -
- All items are on freevend. The credit display shows
(A closure on the optional keyswitch causes the machine to go out of ser-
vice.)
- OR -
- All items are freevended while there is a closure on the
optional keyswitch input. Normal cash sales are supported when the
optional keyswitch input is open.
- OR -
- A closure on the optional keyswitch input causes only the next
item to be freevended. Coin mechanism errors are ignored. This state is
designed for card or token systems where one item is vended per token.
Normal cash sales are also supported.
2. Press
until the option you want is displayed.
3. If you selected
, press
. The display shows *
-----
This display represents the selections which may get free vends. Enable the
selections by pressing the appropriate letter key.
4. CONTINUE.
6730018
71
July, 2003
Download from Www.Somanuals.com. All Manuals Search And Download.
HDC II Programming Guide
Test the Machine
July, 2003
72
Download from Www.Somanuals.com. All Manuals Search And Download.
6730018
Hot Drink Center II Programming Guide
Programming Procedure Index
Air, Test ..............................................................................................................65
Alt Vends, View .................................................................................................62
Anti-Jackpot Timer, SureVend ..........................................................................43
Baud Rate, Select ...............................................................................................10
Bill Validator, Select ..........................................................................................13
Bowl, Rinse Time ...............................................................................................41
Bowls, Rinse .......................................................................................................65
Brewer
Rinse ............................................................................................................66
Rinse Time ..................................................................................................40
Test ..............................................................................................................65
C
Card Reader, Select ............................................................................................15
Clear
All Resettable Data .....................................................................................56
Paid Sales Data Only ...................................................................................57
Tank Errors and Fill the Tank .....................................................................67
Code
Configuration ..............................................................................................20
Data Recall ....................................................................................................8
Freevend ........................................................................................................7
Supervisor .....................................................................................................7
Coin Box, View Amount ....................................................................................57
Coin Mechanism, Select .....................................................................................12
Coins, Payout .....................................................................................................52
Configuration
Code, Set .....................................................................................................20
Setting, View ...............................................................................................51
Cup Sizes
Assign to Selections ....................................................................................24
Set Up ..........................................................................................................23
View ............................................................................................................52
Cup, Test Drop ...................................................................................................64
6730018
Index - 1
July, 2003
Download from Www.Somanuals.com. All Manuals Search And Download.
Hot Drink Center II Programming Guide
Programming Procedure Index
D
Data
Clear All Resettable ....................................................................................56
Clear Paid Sales Only .................................................................................57
Download to a PDCD .................................................................................70
Recall Code ...................................................................................................8
View Four Different Ways ..........................................................................54
View Time ...................................................................................................60
Date, Set .............................................................................................................44
Daylight Savings, Set .........................................................................................44
DEX, Options, Set ....................................................................................... 10, 11
Diagnostic Messages, View ...............................................................................68
Disable Selections ..............................................................................................22
Discount
Mug .............................................................................................................19
Vending, Set ................................................................................................45
View Sales by Time Interval .......................................................................59
Display Language, Select ...................................................................................12
Door, Delivery, Test ...........................................................................................64
E
Errors, Clear .......................................................................................................67
F
Free Vending, Set ...............................................................................................45
Free Vends, View ...............................................................................................59
Freevend
Code, Enter ....................................................................................................7
Message, Select ...........................................................................................48
Set Options ..................................................................................................71
View Sales by Time Interval .......................................................................58
G
Grinder, Test .......................................................................................................65
H
Hot Drink, Set Up ...............................................................................................25
I
ID Number, View ...............................................................................................62
Inhibit Vending, Set ...........................................................................................45
K
Keys, Mode or Payout ..........................................................................................9
July, 2003
Index - 2
6730018
Download from Www.Somanuals.com. All Manuals Search And Download.
Hot Drink Center II Programming Guide
Programming Procedure Index
L
Language, Select ................................................................................................12
Lock
Mode Key ......................................................................................................9
Payout Key ....................................................................................................9
Low Power Settings, Set ....................................................................................39
Low Temperature Dispensing, Set .....................................................................38
M
Machine Type, Set ..............................................................................................20
Message
Edit Custom .................................................................................................49
Freevend, Select ..........................................................................................48
Out-of-Service, Select .................................................................................48
Standby, Select ............................................................................................48
Mode Keys, Lock Or Unlock ...............................................................................9
Monetary Options, Select ...................................................................................15
Month, Day, and Year, Set .................................................................................44
Mug Discount, Set Up ........................................................................................19
O
Out-of-Service Message, Select .........................................................................48
P
Payout Coins ......................................................................................................52
Payout Keys, Lock Or Unlock .............................................................................9
PDCD, Download Data ......................................................................................70
Prices, Set ...........................................................................................................53
Printer
Baud Rate, Select ........................................................................................10
Options, Set .................................................................................................10
R
Rinse
Brewer .........................................................................................................66
Mixing Bowls ..............................................................................................65
Rinse Time
Bowl, Set .....................................................................................................41
Brewer, Set ..................................................................................................40
6730018
Index - 3
July, 2003
Download from Www.Somanuals.com. All Manuals Search And Download.
Hot Drink Center II Programming Guide
Programming Procedure Index
S
Sales
By Drink Size, View ...................................................................................54
By Individual Selection, View ....................................................................55
By Selection, View .....................................................................................55
Discount, View by Time Interval ................................................................59
Machine Total, View ...................................................................................54
Paid, View ...................................................................................................55
Unpaid, View ..............................................................................................61
Selections, Disable .............................................................................................22
Sensors, Test .......................................................................................................66
Software Version, View .....................................................................................43
Standby Message, Select ....................................................................................48
Supervisor
Code, Enter ....................................................................................................7
Mode, Gain Access .......................................................................................7
SureVend ............................................................................................................63
Anti-Jackpot Timer .....................................................................................43
Optional or Mandatory ................................................................................42
turn on or off ...............................................................................................42
View Average Calibration Value ................................................................67
Switches, Test .....................................................................................................66
T
Talker Mode, Set ................................................................................................12
Tank
Fill ...............................................................................................................67
Temperature, View or Set ...........................................................................38
Temperature
View or Set Tank ........................................................................................38
View Water Tank ........................................................................................51
Test
Air ...............................................................................................................65
Automatic Delivery Door ............................................................................64
Brewer .........................................................................................................65
Display ........................................................................................................67
Drop a Cup ..................................................................................................64
Grinder ........................................................................................................65
Switches or Sensors ....................................................................................66
Vend Selections and Verify Credit Added ..................................................64
July, 2003
Index - 4
6730018
Download from Www.Somanuals.com. All Manuals Search And Download.
Hot Drink Center II Programming Guide
Programming Procedure Index
T
Test
Whipper .......................................................................................................64
Throws
Dry Product Gram .......................................................................................28
Hot Water ....................................................................................................31
Time Interval Editing .........................................................................................46
Time of Day, Set ................................................................................................44
Time-of-Day
Discount Vending, Set ................................................................................45
Free Vending, Set ........................................................................................45
Inhibit Vending, Set ....................................................................................45
U
Unlock
Mode Key ......................................................................................................9
Payout Key ....................................................................................................9
V
Validator, View Amount ....................................................................................58
Vends
View Number of Mug .................................................................................62
View Number of Test ..................................................................................62
View Total Paid ..........................................................................................56
View Total Unpaid ......................................................................................61
View
Amount in Coin Box ...................................................................................57
Amount in Validator ...................................................................................58
Data Three Different Ways .........................................................................54
Diagnostic Messages ...................................................................................68
Free Vends ..................................................................................................59
Hot Water Tank Temperature .....................................................................38
Machine Configuration Setting ...................................................................51
Machine ID Number ...................................................................................62
Nonresettable Sales and Vend Data ............................................................53
Number of Alt Vends ..................................................................................62
Number of Mug Vends ...............................................................................62
Number of Test Vends ................................................................................62
6730018
Index - 5
July, 2003
Download from Www.Somanuals.com. All Manuals Search And Download.
Hot Drink Center II Programming Guide
Programming Procedure Index
V
View
Software Version .........................................................................................43
SureVend Last Recorded Calibration Value ...............................................66
Time Data ....................................................................................................60
Total Paid Sales .................................................................................... 54, 55
Total Paid Vends .........................................................................................56
Total Unpaid Sales ......................................................................................61
Total Unpaid Vends ....................................................................................61
Water Tank Temperature ............................................................................51
Winners .......................................................................................................59
View Cup Ring Cycles .......................................................................................63
W
Water Tank Temperature, View .........................................................................51
Whipper, Test .....................................................................................................64
Winner Mode, Set Up .........................................................................................18
Winners, View ....................................................................................................59
Y
Year, Set .............................................................................................................44
July, 2003
Index - 6
6730018
Download from Www.Somanuals.com. All Manuals Search And Download.
Terms and Conditions of Sale
LIMITED WARRANTY: Subject to the limitation specified herein, all parts
included on original equipment manufactured by CRANE MERCHANDIS-
ING SYSTEMS and sold to purchaser are warranted for two years from
the date of shipment of the equipment in question. This warranty applies
only to the original purchaser of the Merchandiser and is null and void if
the Merchandiser is sold during the period of warranty.
Defective parts will be repaired or replaced free of charge when the defec-
tive part is returned, with transportation charges prepaid by purchaser, to
a destination designated by CRANE MERCHANDISING SYSTEMS.
This warranty does not include any cost of service rendered or repairs
made by customer or its agents on Merchandiser, or parts, unless authori-
zation to incur such expense has been given in writing by CRANE MER-
CHANDISING SYSTEMS prior to incurring such expense. This warranty
does not cover labor and service charges performed by CRANE MER-
CHANDISING SYSTEMS service technicians.
This warranty does not apply to A) electrical components, wiring, or cir-
cuits or mechanical parts or assemblies damaged as a result of operating
the Merchandiser at other than the design voltage and frequency speci-
fied on the Electrical Rating Tag, or B) in event of vandalism, fire or negli-
gence, or C) incandescent lamps, neon lamps, fluorescent lamps,
ballasts, starters or other expendable items, or D) when seal is broken on
electronic boards, or E) when other manufactured components are
installed in CRANE MERCHANDISING SYSTEMS Merchandisers.
Replacement parts sold by CRANE MERCHANDISING SYSTEMS as
After Market shall be covered for three months from the date shown on
the parts invoice. Purchaser must obtain prior RETURN AUTHORIZA-
TION for return of all parts, following guidelines given by CRANE MER-
CHANDISING SYSTEMS.
New, unused parts purchased as After Market can be returned within 30
days from date of parts invoice, with prior authorization from CRANE
MERCHANDISING SYSTEMS.
THIS WARRANTY IS IN LIEU OF ALL OTHER WARRANTIES EXPRESS
OR IMPLIED, INCLUDING WITHOUT LIMITATION, WARRANTIES OF
MERCHANTABILITY OF FITNESS FOR A PARTICULAR PURPOSE.
CRANE MERCHANDISING SYSTEMS SHALL NOT BE RESPONSIBLE
FOR CONSEQUENTIAL OR PUNITIVE DAMAGES. CRANE MER-
CHANDISING SYSTEMS neither assumes nor authorizes any person to
assume for it any obligation or liability in connection with the sale of said
equipment or any part thereof.
Download from Www.Somanuals.com. All Manuals Search And Download.
Download from Www.Somanuals.com. All Manuals Search And Download.
|