Cradlepoint Network Router MBR900 User Manual

Register your MBR900  
Mobile Broadband N Router Today!  
MBR900  
Mobile  
Broadband  
~ YOU WILL RECEIVE ~  
FREE Technical Support  
New Product Information  
N Router  
FREE Firmware Upgrades Special Offers & Promotions  
3G/4G Ready  
cradlepoint.com/register  
What’s Included In The Box  
Mobile Broadband N Router  
Quick Start Guide  
Ethernet Cable  
Power Adapter  
There Are Two Ways To Set Up An MBR900 Router:  
2) Wired Connection using Cable/DSL Internet Service  
Connect power and insert one end of your Ethernet cable to the WAN port. Insert the  
other end of the Ethernet cable into your Internet service provider's modem. It may take  
a minute or two for the MBR1000 to initialize. Open your web browser. You can now  
access the Internet.  
1) Wireless Setup using a Mobile Broadband  
(cellular) Data Modem  
Connect Power Supply and insert USB modem.*  
Note: CradlePoint recommends that WiFi security be setup at this point.  
Then, follow the instructions below to establish an wireless internet connection.  
See the “Setting WiFi security on your CradlePoint Router” section of this guide.  
Ethernet Cable  
Internet Service (ISP)  
Ethernet Cable  
Power  
Supply  
Power  
Supply  
USB  
USB  
Modem  
* Mobile Broadband Card not included.  
See your Mobile Broadband Service Provider for details.  
Establishing a Wireless Internet Connection  
Port Panel  
1) Identify the MBR900  
Windows XP  
Open your computer’s WIRELESS  
MBR900-xxx  
NETWORK CONNECTION to associate  
with the router’s Wireless Access Point.  
This is typically completed by opening  
VIEW AVAILABLE NETWORKS  
window. After you have highlighted the  
MBR900-xxx, click CONNECT.  
WAN Port  
WiFi On/Off  
Power On/Off  
Reset Button  
AC Adapter  
Antennas  
4-LAN Ports  
Windows Vista  
Open CONNECT TO A NETWORK by  
MBR900-xxx  
clicking the Start button, and then  
click CONNECT TO. You'll see a list  
of the wireless networks currently  
available. Click on the MBR900-xxx  
network, and then click CONNECT.  
Mac  
Open your wireless connection list  
by clicking the AIRPORT wireless  
icon on your menu bar. Click the  
MBR900-xxx.  
LED Status Lights  
MBR900-xxx  
Signifies the MBR1000 has power.  
Signifies the routers WiFi radio is “On”.  
Blinking indicates traffic.  
1 4  
Signifies that a connection is made on  
respective LAN port. Blinking indicates  
traffic over the port.  
2) Connect To the Internet  
Indicates a recognizable cellular device is  
connected to the router.  
1) Using either a Windows or Mac platform, open a  
browser window. A default CradlePoint page will  
appear asking for a password.  
Red No Connection is being Attempted  
or Device not Recognized or Supported  
Signifies that a connection is made on the WAN  
port. Blinking indicates traffic over the port.  
Note: The WAN port will turn on even if plugged into a computer. It is for Internet  
connections only (i.e. DSL/Cable modems).  
Orange (Blinking) Modem is Dialing  
Orange (Solid) Modem is Recognized  
Green (Blinking) Modem is Negotiating  
Green (Solid) Modem is Connected  
2) The password is the last six digits of the MAC  
address shown on the box label and on the  
bottom of the router. This is a unique number  
identifying your router.  
Stands for "WiFi Protected Setup." When you  
push it, the router goes into setup mode for 90  
seconds; in which time, it looks for other WPS  
devices that are also in setup mode. When  
they find each other, they setup WPA-Personal  
Security between the 2 WiFi devices.  
3) Once you have correctly entered your password,  
click “OK. You can now access the Internet.  
While in Signal Strength button is  
pressed, the WAN, WiFi, WPS and  
Modem LEDs display the strength of  
the Mobile Broadband Modem signal.  
Note: CradlePoint recommends that WiFi security  
be setup at this point. See the “Setting WiFi security  
on your CradlePoint Router” section of this guide.  
Note: While in SGNL mode, you are still able to enter WPS mode, but the WPS LED  
will not be used.Also, if you enter SGNL mode while in WPS mode,WPS will continue  
normally but the WPS LED will not be used.  
Download from Www.Somanuals.com. All Manuals Search And Download.  

Coleman Camping Equipment 5010000320 User Manual
Craftsman Outdoor Cart 48624504 User Manual
Crane Plumbing Heat Pump 8XSE HA User Manual
Crate Amplifiers Stereo Amplifier GT65 212 User Manual
Cub Cadet Snow Blower 928 SWE User Manual
Cuisinart Cookware 766 26 User Manual
Dimplex Heating System R10 73 10kW User Manual
Fusion Car Stereo System MS CD80 User Manual
Garland Range S284 User Manual
GE Cordless Telephone 29735 User Manual