User、s Manual
CHP-06DL
This Water Purifier is for domestic use. It can not be used in overseas where
the power rate is different.
For the right operation of Coway Water Filtration System read this manual.
Download from Www.Somanuals.com. All Manuals Search And Download.
SAFETY INFORMATION
Please read this information to prevent property loss and ensure your safety.
Do not run the power cord under
a heavy object to prevent it from
being damaged.
If the cord or plug is wet, unplug
the unit and let it completely
dry before subsequent use.
Electrical shock or fire may occur
as a result.
Electrical shock or fire may occur
as a result.
If not observed, serious
injury or even death
could occur.
If not observed, serious
injury or property damage
could occur.
If not observed, slight
injury or property damage
could occur.
Warning
Caution
Danger
-
Unplug the unit before repair,
inspection, or replacement.
Do not plug into an outlet or
power strip that is being used
by several other appliances.
Use a separate outlet for the unit.
Electrical shock may occur as
a result.
Fire may occur as a result.
Electricity Safety
Do not use a damaged power
cord or plug, and loose outlet.
Do not unplug by pulling the cord
or handle the plug with wet hands.
Electrical shock or fire may occur
as a result.
Electrical shock or fire may occur
as a result.
Close the main water supply valve
and unplug the power cord when
not using for a long time.
Electrical shock or fire may occur
as a result.
Do not attempt to repair the
power cord.
Electrical shock or fire may occur
as a result.
04
05
Download from Www.Somanuals.com. All Manuals Search And Download.
SAFETY INFORMATION
Please read this information to prevent property loss and ensure your safety.
Danger Warning Caution
Electricity Safety
The length of the water inlet hose
must be 5 m or less.
If it is longer, it may degrade the
product’s performance.
The length of the water outlet hose
must be 25cm or less.
If it is longer, it may degrade the
product’s performance, and prevent
complete drainage of water.
Do not repeatedly plug and unplug
the unit from the electrical outlet.
Electrical shock or fire may occur
as a result.
Do not use if the cord appears to
be damaged. Please ask Customer
Service to replace the cord.
Electrical shock or fire may occur
as a result.
-
-
Remove any dust or water if it’s
on the plug.
*Never use Benzene or gasoline
to clean the plug.
Use or place the unit on a level area
and do not apply force to the unit.
Injury to the user or damage to the
unit could result.
Electrical shock or fire may occur
as a result.
Installation Safety
-
Operation Safety
Keep the product away from the
inflammables gas or burnable
material.
Electrical shock or fire may occur
as a result.
Do not install the unit near
heaters.
Fire may occur as a result.
Cut off the supplying valve and plug
out, then call to A/S center in the
case of any water
Leakage from the product.
Electrical shock or fire may occur as
a result.
06
07
Download from Www.Somanuals.com. All Manuals Search And Download.
SAFETY INFORMATION
Please read this information to prevent property loss and ensure your safety.
Danger Warning Caution
Operation Safety
Be careful not to get burned
by the hot water while
extracting or draining.
Periodical filter replacement is
prerequisite for getting clean water.
Do not place dishes or containers
of water, drugs, food, or small metal
objects on top of the product.
Immediately unplug and call the
Customer Service center if the unit
makes a strange noise
In case filters are overused, the
performance of filters is deteriorate.
Get burned may occur as a result.
or odd smell.
Danger of electric shock, fire, or product
damage if water or alien substances get
into the product.
Fire may occur as a result.
-
When moving the product or replacing
the fine post-carbon filter there may be
black residue particles under the tank
bottom stored water may get
contaminated.
-
Do not put a candle, cigarette or
any other flammable object on it.
Please use after completely closing
the cover of the water tank in the
product.
Bugs or other substances might get
inside the product.
Certain level of fine dust may be introduced
to silver coated activated carbon that is
used to the fine post-carbon filter to
enhance the taste of water; thus, it is
harmless to human body.
Fire may occur as a result.
Others
Do not spray water or wipe them
with benzene when cleaning .
When water if stored or the
product is not in use for a long
time, drain all the water in the
storage tank before use.
Electrical shock or fire may
occur as a result.
Stored water may get contaminated.
08
09
Download from Www.Somanuals.com. All Manuals Search And Download.
SAFETY INFORMATION
Please read this information to prevent property loss and ensure your safety.
Others
NAMES OF EACH PART
Front
Do not carry the unit by its
power cord.
Do not repair, disassemble, or
modify.
▶
Operation Part
Electrical shock or fire may
occur as a result.
Electrical shock or fire may occur
as a result.
▶
Light detection sensor
▶
Selection Button
-
/
▶
Cold/Hot/Room Water
Extraction faucet
Do not use filtered water for the
water exchange of an aquarium
or a fishbowl.
Do not lift or move the product with
extraction faucet.
Danger of leakage or malfunctioning
▶
Gutter
Certain fish may die as a result.
Rear
▶
Top Cover
▶
▶
Radiator
The filtration system installation shall
comply with state and local laws and
regulations. Do not use with water
that is microbiologically unsafe or of
unknown quality without adequate
disinfection before or after the system.
Power Cord
▶
▶
Outlet(Blue)
Inlet(Orange)
10
11
Download from Www.Somanuals.com. All Manuals Search And Download.
WATER FILTRATION PROCESS
PLEASE KEEP IN MIND
The filter is the core technology of the filtration system. If you don’t use qualifying filter
or if you use an old filter that has expired, the system performance may degrade.
▶
The summary for the proper installation of the water filtration system.
▶The 6-step water filtering system (CHP-06DL)
1 Connect the power cord to the
voltage rating that matches it on
the rating plate only.
NEO-SENSE FILTER
Reduces various foreign bodies that come from the feed water pipe such as dirt, sand,
rust particles, VOCs and chlorine.
MEMBRANE FILTER (RO)
The RO(Reverse Osmosis) Membrane filter reduces Pentavalent Arsenic, Barium, Cadmium,
Mercury, Selenium, Radium 226/228, Trivalent chromium, Hexavalent chromium, Lead,
Nitrate/Nitrite. The influent water to the system shall include the following characteristics.
∙No organic solvents ∙Chlorine : < 2 ppm ∙pH : 7-8 ∙Temperature : 41-95 ℉(5-35 ℃)
∙Iron : < 2 ppm ∙Turbidity : < 1 NTU ∙Hardness : < 1000 mg/L
2 Close main water supply valve
to separate the faucet.
Do not turn the water pipe.
/
POST-CARBON BLOCK FILTER
It is a composite filter. The post-carbon filter removes odor of water and improve water
taste. And the filter sensor eliminates the dust particles in the post-carbon filter.
3
Wind the teflon tape on the adaptor
and fit it to the pipe.
CERAMIC FILTER
Restraints propagation of the microorganism inside water tank and enhances sanitation.
Shall install the adaptor with connector on
the cold water pipe.
Disposed
Water
Outlet
4 Connect the faucet with the
adaptor.
NEO-SENSE
FILTER
MEMBRANE
FILTER
POST-CARBON
BLOCK FILTER
CERAMIC FILTER
WARNING
5 Connect ¼orange tubing with
The disposed water shall be used for cleaning a toilet, a house, dishes, and as
water for sundry uses. However, please do not use it for potable water or
cooking water.
the connector on the adaptor.
Flush water through each filter at least 5
minutes before Connection
This system conforms to NSF/ANSI 58 for the reduction of Barium, Radium
226/228, Cadmium, Lead and TDS as verified and substantiated by test data.
12
13
Download from Www.Somanuals.com. All Manuals Search And Download.
PLEASE KEEP IN MIND
▶
The summary for the proper installation of the water filtration system.
3 To drink room water, select the
room button.
6 Open the main water supply
valve to supply water to the
product.
Select the room water button and
touch the extraction part, and you
can extract a cupful of water. If you
touch the extraction part again
during extraction, water stops
flowing.
Discard first 2 tanks of water.
▶The summary for the proper use of the water filtration system.
1 Select the cold button to drink cold water.
4 Select the hot button to drink hot water.
To drink cold water, the cold water function must be operating.
Press the cold button for three seconds, and the cold water mode lamp
comes on; you can then use cold water. (See P. 20). If you don’t need the
cold water, press the cold button again for three seconds, and the lamp
goes out, exiting cold water mode.
To drink hot water, the hot water function must be operating.
Press the hot button for three seconds, and the hot water
mode lamp comes on; you can then use hot water. (See P. 21).
If you don’t need the hot water, press the hot button again for three
seconds, and the lamp goes out, exiting hot water mode. (The mode
automatically returns to cold water mode three seconds after the hot
water mode is selected).
�
�
2 To drink cold water, press the
cold button after the cold water
lamp comes on.
To drink cold water, select the cold
button and touch the extraction part,
and you can extract a cupful of water.
If you touch the extraction part again
during extraction, water stops
flowing.(See P. 22)
14
15
Download from Www.Somanuals.com. All Manuals Search And Download.
PLEASE KEEP IN MIND
PREPARATIONS
▶The summary for the proper use of the water filtration system.
▶Please check before use
5 To drink hot water, select the
hot button after the hot water
lamp goes on.
Connect it to voltage rating that matches it on the rating plate.
Then, open the feed valve to supply water to the filtration system.
Select the hot button and touch the
extraction part, and you can extract
a cupful of water. If you touch the
extraction part again during
extraction, the water stops flowing.
(See P. 22)
When the lamp on the indication
parts are turned out
Draining hot water
■
■
Pull the drainage door at the side
downwards, and insert the drainage
hose; this way, you can completely drain
the hot water inside the system.
When the lamp on the indication parts
are turned out please check the reason
for break of electric supply in case of
electricity failure or other conditions.
/
※
Note: take care not to burn yourself, since
hot water suddenly
starts to drain as soon as the hose is inserted.
6 Empty the gutter periodically.
Prevent water overflowing from the
water receptacle by periodically
emptying it. (See P. 28)
7 Need for periodical filter
change and maintenance.
To drink clean water, the filter needs to be changed and cleaned
periodically.
Change the filter according to the filter replacement cycle. (See P. 30)
Hot water caution
After installation
■
■
Use after throwing away the water in
the water tank up to full level more
than twice.
Take care to avoid burns when
extracting hot water.
16
17
Download from Www.Somanuals.com. All Manuals Search And Download.
OPERATION PART
/INDICATION PART
PREPARATIONS
▶Please check before use
▶Operation Part/Indication Part
▶
2
1
Cold water mode lamp
/ cold water 3 step LED
Hot water mode lamp
/ hot water 3 step LED
▶
Regular filter change
In case of no service for a long time
■
■
The regular filter change is very
important to have clean water. The filter
after life is ended may degrade the
performance. Thus, do not miss the
time for the filter change.
In case of no service for a long time,
completely drain the water from the tank.
Next, fill and empty water again. And use
the product.
/
Hot water
lock button
3
▶
▶
Light detection
sensor
8
Hot water
lock on
4
5
▶
▶
Hot water
button
▶
When not using for a long time please lock the main
water supply valve and plug out the power cord.
Cold
7
water button
Room water
button
6
▶
Hot water mode lamp
Cold water mode lamp
2
1
Hot water temperature 3 step LED
Cold water temperature 3 step LED
The lamp is on when hot water mode
is selected. The lamps reflect the
temperature of the water, so more
lamps come on as the temperature
gets higher.
The lamp is on when a cold water
mode is selected. The lamps reflect
the temperature of the water, so
more lamps come on as the
temperature gets lower.
Hot water lock button
Hot water lock on
4
3
When the hot water lock button is
pressed for three seconds, hot water
cannot be extracted, even by pressing
the hot water button, and an alarm
goes off.
The lamp goes on when the hot
water lock button is selected.
18
19
Download from Www.Somanuals.com. All Manuals Search And Download.
OPERATION PART
/INDICATION PART
▶Operation Part/Indication Part
5
6
Room water button
Hot water button
When using the hot water lock
■
■
To use hot water, press the hot button,
check if the hot water mode lamp goes
on, and extract water. (However, the
mode automatically returns to cold
water mode three seconds after hot
water has been extracted.)
To use room water, press the
room button and extract water.
Press the hot water lock for three
seconds. Check if the hot water lock
lamp comes on.
Light detection sensor setting function
Press the hot and cold buttons together for
three seconds; the hot water mode lamp
flickers as shown in the picture with a “pinging”
sound, and the system enters the setting
mode.
Press the cold button once; the cold water
mode lamp comes on, and the light detection
sensor function is set.
7
8
Light detection sensor
Cold water button
Press the cold button, check if the
cold water mode lamp is on, and
extract water.
Detects the ambient light,
reducing energy usage by
automatically decreasing the
operation frequency of the cooler.
set
unset
(When the cold water mode lamp goes out, the
function is disabled.)
After setting the mode, press the room button
for three seconds; the system saves the last
set mode and converts to standby mode.
When using cold water
■
■
■
Press the cold button, and check if
the cold water mode lamp is on.
Fixed quantity extraction function
■
Press the hot and cold buttons together for
three seconds; the hot water mode lamp
flickers as shown in the picture with a “pinging”
sound, and the system enters the setting mode.
The quantity is adjusted each time the hot
When using room water
Press the room button, and touch
the extraction part.
button is pressed (120cc
�200cc�300cc�
120cc), and the hot water mode lamp goes on
according to each quantity phase. After
completing the mode setting,
120cc
200cc
300cc
To use hot water
press the room button for more than three
seconds; the system saves the last set mode
and converts to standby mode.
Press the hot button, and check if the
hot water mode lamp is on.
To use both the hot water and cold water modes, press each button for more than three seconds. Once both hot water
and cold water mode lamp go on, you can use them.
※
※
“Light detection sensor” is set to disabled status at the initial usage
20
21
Download from Www.Somanuals.com. All Manuals Search And Download.
HOW TO OPERATE
▶To drink cold water
▶To drink room water
Press the cold button after the cold
water mode lamp has come on, and touch the
extraction part.
Press the room button and touch the extraction
part.
�
�
▶Fixed quantity extraction
Select the water mode you desire, and lightly
touch the extraction part. A predetermined
quantity of water comes out.
When the cold water does not extract from the product please check if the
cold water mode indicator is on.
▶To drink hot water
▶Continuous extraction
Presse the hot button after the hot water mode
lamp has come on, and touch the extraction part.
Select the water mode you desire, and touch and
hold the extraction part for 3 seconds or more.
The extraction part LED flickers, signifying
continuous extraction, and discharges water for
60 seconds. Touching the extraction part again
during extraction stops the flow of water.
3seconds
�
The influent water should not include any organic solvents because they may damage
RO membrane polymer and may decrease the performance of RO membrane.
22
23
Download from Www.Somanuals.com. All Manuals Search And Download.
INSTALLING METHOD
▶Follow the instruction for installation
Be cautious
Ⅰ
Ⅱ
■
■
Installation place
Installation place
When installing avoid bumpy areas,
damp areas, and area in the reach of
direct sunlight, dusty areas, water
splashing areas.
Have 10Cm space between the wall
and the product and install above
the floor where it is solid and flat.
cooling
stopper
▶
Main water
supply valve
▶
After installation
■
Moving and installation.
■
After installing use after throwing
away room water more than twice.
When moved, connect the power
cord after 30minutes of installation.
Cold water pipe
■
No
hot water
Always connect to the cold water pipe.
(When it is connected to hot water pipe the
filter of the Water Purifier may get damaged)
Connect the orange color inlet tubing � to
the tap water supplying pipe.Connecting the
■To secure the optimum performance of the product, consult with an installation
expert for further installation. -Service center : 213-480-1600
■Residuals may be left inside the filter which is used during the process of inspection
when the product was manufactured.
outlet tubing �.
Inlet tubing (Orange)
Outlet tubing (Blue)
- It is not used product so feel safe to use them.
�
Do not use the main water supply valve or hose again that is used before when
installing the product.
�
24
25
Download from Www.Somanuals.com. All Manuals Search And Download.
CLEANING METHOD
▶Inside water tank
Close the water supply valve, press the cold
water button at the front of the product for 3
seconds to turn off the cold water function,
and completely drain the
cold/room-temperature water
by selecting continuous cold
Clean the surface of the water drum with a
soft cloth.
1
5
6
�
�
water extraction mode.
Rinse the water drum with
the previously stored room-
temperature water, plug the
power in, and completely
drain the rinsing water using
the cold water continuous
extraction function.
Open the drain door, and remove the red drain
safety cap. Using the drainage hose, completely
discharge all the hot water in the tank, and
store the water. When the water
is completely drained, pull out
the power cord.
2
�
Fix the ceramic filter underneath the water drum cover, and
close the water drum cover.
7
Open the top cover of the product, and open the water drum
cover inside the product.
3
4
�
�
�
�
�
Close the top cover and then connect the power cord
before opening the main water supply valve. After
checking water extraction from the faucet of the
cold/room water and hot water, press the cold water
selection switch in front of the product for re-operation.
8
Remove the ceramic filter
from the bottom part of
the water drum cover,
and clean by agitating in
room-temperature water.
�
�
�
Please close the cover of the storage
tank completely.
Ants or other substances might get inside.
26
27
Download from Www.Somanuals.com. All Manuals Search And Download.
FILTER REPLACEMENT
AND DAILY CHECK
CLEANING METHOD
▶Inside water tank
▶Filter Replacement
■
Filter
chemicals or
detergents
When cleaning storage tank do not use
chemicals or detergents.
The vitality of product is the filter. The fraudulent filters or
missing time for filter change may degrade the
performance and so interrupt the filtration.
When the chemicals and detergents are not washed out
completely it may be harmful to health.
Estimated Time of Filter Replacement
If the filter is not regularly replaced, it may degrade the water quality from the product. The filter
change cycle may vary within the range of expected replacement cycle depending on the feed
water quality.
■
/
Please always keep environment clean and clean the storage tank
once every two months.
■
※
The period for the filter exchange is made based on 10ℓ use in a day for house use (4 people
based) and 20ℓ use for business.
Part No.
Names of Filter
Neo-sense ilter
Membrane ilter(RO)
Post-Carbon Block Filter
Ceramic ilter
Usable Period
6 months
▶Gutter
F
F
24 months
18 months
12 months
Removing the receptacle
1
F
Hold the receptacle by the front, and pull
lightly.
∙This reverse osmosis system contains a replacement component critical to the efficiency of the
system. Replacement of the reverse osmosis component should be one with identical
specifications, as defined by the manufacturer, to assure the same efficiency and contaminant
reduction performance.
∙This reverse osmosis system contains a replacement treatment component critical for the
effective reduction of total dissolved solids, and that the product water shall be tested periodically
to verify that the system is performing properly.
■
Installing the receptacle
About Estimated Time of Filter Replacement
The filter change cycle described above is not the filter quality
warranty period but the expected cycle that the filter shows its
original performance. (based on the tap water.)
2
Place the water receptacle hook in front of the
product. Lightly push the hook while pressing it
downwards.
※
The filter change cycle may be reduced for the areas with poor
water quality or more applications.
The product water should be tested every 6 months to ensure
that the contaminants are being reduced effectively.
Please contact your local dealer or Coway to initiate this service.
28
29
Download from Www.Somanuals.com. All Manuals Search And Download.
FILTER REPLACEMENT
AND DAILY CHECK
FILTER REPLACEMENT
METHOD
▶Regular Check
▶Please replace filter
For safe operation, we recommend the frequent check on the product. Keep the
optimum status of the product by frequent check for the following items.
After pulling out the power plug lock the feed water valve
and drain out the water inside the Water Purifier.
1
Power
■
- Does the indication part repeat ON and OFF when you touch the power cord When the power
is connected?
- Is a part of power cord hotter than usual?
- Is a part of power cord distorted, discolored or damaged?
�
For any event above, immediately stop the operation and
contact your nearest Coway Customer Service Center.
Indication Part
■
- Does any lamp on the indication part abnormally flicker?
/
For the abnormal flickering of lamp, immediately Contact your
nearest Coway Customer Service Center.
Pull up the front drain door and using a cross screw driver
loosen the screw. Push down the lower cover and pull to the
front and separate.
2
�
30
31
Download from Www.Somanuals.com. All Manuals Search And Download.
FILTER REPLACEMENT METHOD
BEFORE ASKING A/S
▶Please replace filter
▶Check the followings before asking A/S.
The product may not properly work due to the reasons except the breakdown because
you are not accustomed to how to operate or any negligible reasons. In those cases,
check the followings, and you can solve the simple troubles without the help from the
customer service center. If the trouble continues after you check the followings, contact
your nearest Customer Service Center.
Replace after separating the fitting connected to the filter
needed for replacement.
3
※Separate the fitting with using proper equipment.
Problem
Check Items
Solutions
�
�
Did you clean the water drum?
Clean the water drum.
�
The water
tastes weird
Did you use the filter system for
too long?
Remove the stored water
and clean the water drum.
�
�
�
�
Is it about time to change the filter?
Is it about time to change the filter?
Did you lock the water supply valve?
Request filter change.
Request filter change.
Open the water supply valve.
/
The water is
flowing
slower.
After replacing the filter check if there is no leakage and drain out
the room water.
Did the temperature of the water When the temperature drops, the
drop suddenly?
amount of water filtered decreases.
Turn the cold water mode on by
pressing the cold water button for 3
seconds
�
Is the cold water lamp on?
Adjust the front cover to the matching part at the lower part
and then close it pressing downward.
4
�
�
The cooling system may be malfunctioning. Request A/S.
There is no
cold water.
Connect the power to the voltage
rating that matches it on the rating
plate.
Is the power turned on?
If the water level is low, the cold
water function does not activate,
to protect the electronic motor.
Open the water supply valve.
�
Did you close the water supply
valve?
�
�
�
Deactivate hot water.
Is the hot water lock lamp on?
Is the hot water lamp on?
Turn the cold water mode on by
pressing the cold water button for 3
seconds
There is no
hot water
Connect the power to the voltage
rating that matches it on the rating
plate.
�
�
Is the power connected?
■When exchanging neo-sense filter : Install the filter after cleaning it for about 30seconds.
■When exchanging fine post-carbon filter : Install after cleaning the filter with water that has gone
through the neo-sense filter for about 3 minutes.
Is room-temperature water
overflowing or leaking?
Request A/S.
32
33
Download from Www.Somanuals.com. All Manuals Search And Download.
BEFORE ASKING A/S
SPECIFICATION
Coway Water Purifier
Product
Model
Problem
Check Items
Solutions
CHP-06DL
�
Is it about time to change the filter?
Request filter change.
Reverse Osmosis
Filtration method
Power Supply
�
�
Is the water supply valve closed,
or the water supply cut?
Water does
not come
out, or the
fixed
Voltage rating that matches it on the rating plate.
0.8gal
Open the water supply valve.
Room water
cold/warm/room-temperature water
extraction faucet may be malfunctioning.
Request A/S.
0.6gal
Cold water
Hot water
Total water
Tank
capacity
/
quantity has
changed
�
�
Is the hose bent?
Straighten the hose.
0.3gal
1.7gal
Shorten the water inlet hose
to 5m or less.
Is the water inlet hose too long?
260(W) x 440(D) x 510(H)mm <10.2(W) x 17.6(D) x 45.3(H)inch>
18.7㎏(41.2 lb)
Demension
�
�
�
Check the water supply valve.
Is the water being supplied properly?
Is the power turned on?
Net Weight
All functions
suddenly
stop during
operation.
Connect the power to the voltage
rating that matches it on the
rating plate.
76.8ℓ/ day (20GPD) (25℃, 20psi)
0.07-0.82MPa (20-120psi)
Filtration Capacity
Working Pressure
Working Temperature
Is room-temperature water
overflowing or leaking?
Request A/S.
5-35℃(41-95℉)
Open the top cover and check.
Close the water supply valve and
request A/S.
�
There is
leakage.
Is water leaking from the water drum
cover or from inside the product?
※Without any prior notice, all or parts of the product are subject to change for the purpose of
improving the performance of the product.
※Efficiency rating means the percentage of the influent water to the system that is available to
the user as reverse osmosis treated water under operating conditions that approximate typical
daily usage.
A/S Phone No : 213-480-1600
※Recovery rating means the percentage of the influent water to the membrane portion of the
system that is available to the user as reverse osmosis treated water when the system is
operated without a storage tank or when the storage tank is by passed.
34
35
Download from Www.Somanuals.com. All Manuals Search And Download.
WARRANTY INFORMATION
Product Guarantee
WATER FLOW DIAGRAM
▶CHP-06DL
Parts and components shall be replaced free of charge within the guarantee period if
the defects occur due to manufacturing defects in normal operation.
Contact us in case of breakdown.
In the following cases, repair work shall be charged even within the guarantee period.
▶Breakdown caused by careless operation or unreasonable repair and renovation.
▶Breakdown caused by nonperformance of the instructions specified in the manual.
Even after the expiration of guarantee period, it is possible to apply for charged repair.
Present this Letter of Guarantee whenever repair is needed.
1.
2.
3.
/
4.
5.
6.
7.
This Letter of Guarantee is valid only in domestic where you buy this product.
Keep this Guarantee carefully as it is not re-issued.
Model
CHP-06DL
Guarantee Period
1 year
Serial No.
Date of Purchase
Guarantee Period
Customer’s Address
Customer’s Name
From
To
Tel.
Please contact our customer's service center in case you are not satisfied with our A/S service.
●
●
●
Nationwide A/S Call : 213-480-1600
Nationwide Periodical Inspection and Filter Replacement Call : 213-480-1600
Customer Counseling Center Call : 213-480-1600
Fax :
In case any other filters or parts which are not genuine
products of we are used, we is not responsible for any
problems related to water quality.
☞
Coway Co., Ltd
658 Yoogoo-Ri, Yoogoo-Eub, Gongju-Si, Choongnam, Korea
Tel : 82-41-850-7879 Fax : 82-41-841-7816
36
37
Download from Www.Somanuals.com. All Manuals Search And Download.
MEMO
38
39
Download from Www.Somanuals.com. All Manuals Search And Download.
|