Bidet
BA08-AR/AE
•
•
•
This product can not be used if the voltage is different from that
mentioned in the rating plate.
For your safety and proper use of the product, please read this
User’s Manual before use.
Warranty card is included in this User’s Manual.
Download from Www.Somanuals.com. All Manuals Search And Download.
DEAR CUSTOMERS
Thank you for using our Coway Bidet.
Please read this User’s Manual to use and maintain the product correctly.
If you encounter a problem while using the product, you may solve the problem referring to the
User’s Manual. As this manual contains the product warranty card, please keep it in a safe place.
CONTENTS
FOR INFORMATION
HOW TO USE
SAFETy iNFORmATiON. . . . . . . . . . . . . . . . . . . 4
Electrical Safety. . . . . . . . . . . . . . . . . . . . . . . . 4
Installation Safety. . . . . . . . . . . . . . . . . . . . . . 5
Operation Safety. . . . . . . . . . . . . . . . . . . . . . . 6
Others. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7
KEEP iN miND. . . . . . . . . . . . . . . . . . . . . . . . . . .11
PREPARATiONS . . . . . . . . . . . . . . . . . . . . . . . . .13
OPERATiON/iNDiCATiON PART . . . . . . . . . .14
HOW TO USE. . . . . . . . . . . . . . . . . . . . . . . . . . . .18
For Rear Cleansing . . . . . . . . . . . . . . . . . . . . 18
For Front Cleansing . . . . . . . . . . . . . . . . . . . 19
PARTS NAmE . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8
MAINTENANCE
OTHERS
TROUBLESHOOTiNG . . . . . . . . . . . . . . . . . . . .29
SPECiFiCATiON . . . . . . . . . . . . . . . . . . . . . . . . .31
WARRANTy CARD. . . . . . . . . . . . . . . . . . . . . . .34
iNSTALLATiON . . . . . . . . . . . . . . . . . . . . . . . . . .20
Uninstallation Existing Toilet Seat . . . . . 21
Installation the Product . . . . . . . . . . . . . . . 21
Installation the Remote Control Mount. . 23
CLEANiNG mETHOD . . . . . . . . . . . . . . . . . . . .25
Nozzles. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 25
Product Body. . . . . . . . . . . . . . . . . . . . . . . . . 25
Uninstallation the Product . . . . . . . . . . . . 26
mAiNTENANCE . . . . . . . . . . . . . . . . . . . . . . . . .27
Freezing Protection Function. . . . . . . . . . 27
FiLTER REPLACEmENT mETHOD . . . . . . . . .28
3
- Please keep the User’s manual where it can be readily reached or found -
Download from Www.Somanuals.com. All Manuals Search And Download.
SAFETy INFORMATION
Be careful to keep this safety information.
Please read this information to prevent property loss and ensure your safety.
If not observed,
serious injury or
even death may
occur as a result.
If not observed,
serious physical
injury or property
damage may occur
as a result.
If not observed, minor
physical injury or
property damage
Danger
Warning
Caution
may occur as a result.
Electrical Safety
Do not use a damaged
power cord or plug, and
loose outlet.
Please connect the power
plug to a dedicated
grounded electrical outlet.
Otherwise, electric shock or fire
may occur as a result.
Otherwise, electric shock or fire
may occur as a result.
Do not carry the unit by its
Do not touch the power plug
power cord.
with a wet hand.
Otherwise, electric shock or fire
may occur as a result.
Otherwise, electric shock or fire
may occur as a result.
Do not forcefully bend the
power cord or put it under
a heavy object to prevent
it from being damaged or
deformed.
Do not connect and pull out
the power plug repeatedly.
Otherwise, electric shock or fire
may occur as a result.
Otherwise, electric shock or fire
may occur as a result.
if the electric outlet is wet,
carefully unplug the unit
and let the electric outlet
completely dry before
subsequent use.
Unplug the product before
repair, inspection, or parts
replacement.
Otherwise, electric shock or fire
may occur as a result.
Unplug before
the repair
After drying
completely
Otherwise, electric shock or fire
may occur as a result.
Remove any dust or water
off in the pin and contacts of
the power plug.
Otherwise, electric shock or fire
may occur as a result.
Do not plug into an outlet
that is being used by several
other appliances. Use an
electrical outlet dedicated.
Otherwise, fire may occur as a
result.
4
Download from Www.Somanuals.com. All Manuals Search And Download.
Danger Warning Caution
When you don’t use for a
long time, close the main
water supply valve and
unplug.
Otherwise, electric shock or fire
may occur as a result.
Do not attempt to repair or
modify the power cord at
your discretion.
Otherwise, electric shock or fire
may occur as a result.
in the case the power cord is
damaged, do not replace the
cord yourself. Call Service
Center to have it replaced.
A/S
Otherwise, electric shock or fire
may occur as a result.
Installation Safety
Do not install near a heating
device.
Otherwise, fire may occur as a
result.
Avoid installing the product
in places where the air is
damp, dust is accumulated,
or water drops.
Otherwise, electric shock or fire
may occur as a result.
Do not place or use the
inflammable gases, nor the
flammable materials near
the product.
Otherwise, electric shock or fire
may occur as a result.
Use tap water as a main
water.
Industrial water or gray water, if
used as main water, may cause skin
damage or diseases.
Tap water
Don’t use!
Industrial water
or gray water
Don’t connect the main
water to the warm water
pipe.
After installation, make sure
to check the water supply
connections for leaks.
Cold water
Otherwise, malfunctions or
accidents may occur as a result
(Make sure to connect to cold main
water supply pipe).
Rubber packing should be applied
to the connection hose.
Don’t connect!
Warm water pipe
Do not install the bidet in a
location exposed to direct
sunlight.
Otherwise, deformation or
discoloration may occur as a result.
5
Download from Www.Somanuals.com. All Manuals Search And Download.
SAFETy INFORMATION
Operation Safety
if the steam cleaner
Do not insert a wire or sharp
object in any gap of the product
or the warm air outlet.
Otherwise, electric shock, fire, or
product damage may occur as
a result.
produces a strange noise,
flaming smell, or smoke,
immediately unplug from
the electrical outlet and call
our Service Center.
A/S
Otherwise, electric shock or fire
may occur as a result.
Do not place an electric
heater near the product
or dispose of any flamed
material such as lit cigarettes
in the toilet.
Do not place any containers
with water, medicine, food,
small metallic objects, or any
flammable material on the
top of the product.
Otherwise, fire or product
deformation may occur as a result.
In the case foreign material gets
inside the product, electric shock,
fire, product damage may occur
as a result.
Do not use the product
where excessive moisture
exists or do not splash water
on the product.
Otherwise, electric shock or fire
may occur as a result.
Do not use the product if it is
not working properly.
A/S
Please unplug immediately, and
call our service center after closing
the main water supply valve.
Electric shock or fire may occur
as a result.
Do not block the air dryer
outlet with a hand.
Otherwise, burns or fire may occur
as a result.
Please turn off the main
water supply valve when you
replace the filter.
Otherwise, electric shock or product
damage may occur as a result.
Please turn off when
you replace the filter
For children, the elderly, and
those who cannot adjust the
temperature themselves or
with sensitive skin, set the
warm water temperature and
seat temperature to “Low.”
Do not use the bidet’s
control panel as a support or
forcefully press it down.
Otherwise, product damage or
malfunction may occur as a result.
Otherwise, low temperature burns
may occur as a result.
“Low temperature burns”: It means
burns inflicted by contacting
temperatures 40 ºC or lower for an
extended period of time.
Do not stand or place a
heavy object on the seat
cover.
Don’t open/close the seat
cover severely or lean.
Otherwise, product damage or
malfunction may occur as a result.
Otherwise, product damage or
It is opened and closed slowly as
‘Soft seat open and close’methods.
malfunction may occur as a result.
6
Download from Www.Somanuals.com. All Manuals Search And Download.
Danger Warning Caution
Exercise caution not to have
urine touch nozzles, air dryer
outlet, or outside surface of
the product.
Otherwise, bad smell or
malfunction may occur as a result.
if the product is not to be
used for a long time, pull
out the power plug from the
electrical outlet, close the
main water supply valve,
and drain the water in the
water tank.
(See P.26)
Others
While taking a shower or
cleaning the bathroom, pull
out the power plug from the
electrical outlet and exercise
caution not to have water or
detergent splashed on the
bidet.
Don’t separate the bidet
body and the bidet seat.
Otherwise, electric shock, fire, or
product damage may occur as
a result.
Otherwise, electric shock or fire
may occur as a result.
In the case foreign material
gets inside the product, pull
out the power plug from the
electrical outlet, turn off the
main water valve, and call the
Coway Service Center.
Do not disassemble, repair,
or modify the product at
discretion.
Don’t pull out the bidet
hose or the connection hose
severely.
Otherwise, electric shock, fire, or
product damage may occur as
a result.
Otherwise, leaks or malfunction
may occur as a result.
Unplug the system before
you clean it and do not
Benzene, thinner, alcoho
splash water directly on the
bidet or don’t use thinner,
or benzene, chemicals, or
hydrochloric acid detergent.
Otherwise, metal parts may corrode
or the bidet body may have
discoloration or scratch as a result.
Use soft cloth or sponge to
clean the bidet when you clea
This product is exclusively for use in a bathroom. Do not use the product for other
purposes not specified in the User’s Manual (for abnormal use not intended by the
manufacturer).
Tips
7
Download from Www.Somanuals.com. All Manuals Search And Download.
PARTS NAME
Dimensions
The toilet dimensions must be within those shown below.
Do not install this product on a toilet that does not meet these dimensional requirements.
197.2 mm 400 mm 525 mm
(7.76 inch) (15.7 inch) (20.7 inch)
Round type
125 mm
(5 inch)
375 mm
(14.8 inch)
199 mm
402.5 mm 525 mm
(7.83 inch) (15.9 inch) (20.7 inch)
Elongate type
125 mm
(5 inch)
405 mm
(15.9 inch)
140 mm ~ 210 mm, 260 mm
(5.5 ~ 8.3 inch, 10.2 inch)
Distance of
fixing hall
8
Download from Www.Somanuals.com. All Manuals Search And Download.
Front
Seat cover
Precautions sticker
Nozzle
Main water supply pipe
Bidet seat
T-shaped connector
Main water supply valve
Indication part/
operation part
Bidet hose
Remote control
mount
Rear
Ș
Ș
Power cord
Product sticker
Ș
Ș
Drain hole
Nano silver ceramic MF filter
9
Download from Www.Somanuals.com. All Manuals Search And Download.
PARTS NAME
Installation Material
2 fixing screws
Bidet hose
2 fixing rubbers
T-shaped
connector
2 fixing washers
2 fixing nuts
Rubber packing
Filter fixing
stopper
2 fixing sliders
Nano silver
ceramic MF filter
2 batteries
(AA size)
Filer clip
Screw (Ø 6)
Grounding
This product must be grounded, in the event of an electrical short circus, ground reduces the risk of electrical
hazards by providing an escape wire for the electric current. The power cord has grounding wire and a three-
blade grounding plug (shown below). Do not use an adapter with the product’s power plug, or use any other
methods to connect the plug to an improperly configured outlet. The Power source to which the product
connected must be 120 V~, 60 Hz with an minimum current rating of 7 A. The outlet must be properly
installed and grounded, and have three slot receptacle (shown bellows). If it is necessary to use an extension
cord, use only a three wire extension cord that has a three-blade grounding plug. The extension cord must be
rated 125 V~, 7A.
Improper use of the grounding plug can result in a risk of electric shock.
Grounding
outlet
Grounding
pin
10
Download from Www.Somanuals.com. All Manuals Search And Download.
KEEP IN MIND
Connect the power.
Turn on the product by connecting the power plug to the electrical outlet and
pressing the power selection button on the control panel.
The bidet works normally only when the electricity is connected.
This product is for 120 V~, 60 Hz only.
Please connect the power plug to a dedicated grounded
electrical outlet for 120 V~, 60 Hz.
Tips
Open the main water supply valve.
The main water must be supplied to operate the bidet normally.
Check whether the product is in power saving mode
before use.
3
2
1
-
When you set the bidet body power saving mode, if there aren’t a seat
sensor sensing and a button operation for 30 minutes, a warm water/seat
temperature operates as‘Low’status and the power save mode is kept.
In the power save mode, the power selection indicator is turned off.
When you sit on the bidet seat or press the button on the control panel, a
-
-
power selection indicator is turned on and the water/seat temperature is operated as the last setting.
If you sit on the bidet seat or the power selection indicator doesn’t be turned on even if you press the
button on the control panel, as the power is turned off, use after pressing the power selection button and
turning on the power.
-
Setting Special Mode
Setting/canceling power saving mode
1) Turn on the remote control by pressing the power selection button on the remote control with pulling out
the power plug, and plug in the power plug with pressing the rear cleansing function selection button of
the bidet body (Alarm).
2) Press the rear cleansing function selection button on the remote control and select the desired status.
-
-
The alarm rings 1 time (ding) : It means the release of the bidet body power save mode.
The alarm rings 2 times (ding ding) : It means that the bidet body power saving mode was set.
3) When you select the wanted status and press the air dryer function selection button on the remote
control, the selected setting is saved and it is switched to the waiting status (The alarm rings three times
(ding ding ding)).
Setting/canceling seat sensor lock mode
1) Turn on the remote control by pressing the power selection button on the remote control with pulling out
the power plug, and plug in the power plug with pressing the rear cleansing function selection button of
the bidet body (Alarm).
2) Press the front cleansing function selection button on the remote control and select the desired status.
-
-
The alarm rings 1 time (ding) : It means the release of the seat sensor lock mode.
The alarm rings 2 times (ding ding) : It means that the seat sensor lock mode was set.
3) When you select the wanted status and press the air dryer function selection button on the remote
control, the selected setting is saved and it is switched to the waiting status (The alarm rings three times
(ding ding ding)).
11
Download from Www.Somanuals.com. All Manuals Search And Download.
KEEP IN MIND
Setting/canceling silent mode
1) Turn on the remote control by pressing the power selection button on the remote control with pulling out
the power plug, and plug in the power plug with pressing the rear cleansing function selection button of
the bidet body (Alarm).
2) Press the stop button on the remote control and select the desired status.
-
-
The alarm rings 1 time (ding) : It means the release of the silent mode.
The alarm rings 2 times (ding ding) : It means that the silent mode was set.
3) When you select the wanted status and press the air dryer function selection button on the remote
control, the selected setting is saved and it is switched to the waiting status (The alarm rings 3 times (ding
ding ding)).
Setting/canceling remote control power saving mode
1) With the remote control turned on, press and hold the nozzle position
more (The LCD screen blink).
button for 5 seconds or
2) When the nozzle position indicator is lightened on LCD screen, it means that the remote control power
saving mode is set, and when it is turned off, it means that mode is released (See the following figure).
3) When you press any button on the remote control, it is switched to the waiting status with saving the
setting.
With power saving mode on, the batteries on the remote control last longer.
The product is supplied with the remote control power saving mode set.
Power saving mode set screen
Power saving mode canceled screen
3
2
1
3
2
1
When you press the power selection button on the remote control, the powers on
the remote control and bidet body are operated simultaneously (But the button in
the bidet body work regardless of the remote control).
When the bidet body power selection indicator doesn’t turn on even if you sit on
the bidet seat, as the power is turned off, turn on by plugging in the power plug
and pressing the power selection button.
Tips
12
Download from Www.Somanuals.com. All Manuals Search And Download.
PREPARATIONS
This product is for 120 V~, 60 Hz only.
Please connect the power plug to a dedicated grounded
electrical outlet for 120 V~, 60 Hz.
Tips
After installation
Check if there is a leak in the main water supply valve and the
connection hose. You must insert the rubber packing between the
T-shaped connection pipe and the main water supply valve.
Periodic filter replacement
It is important to replace the filter periodically for the clean rinsing.
If the filter is overused beyond its service life, the filter performance
deteriorates, resulting in cleansing water that is not filtered properly.
Please keep the filter replacement cycle.
Filter replacement cycle : Every 4 months.
if the bidet has not been used for a long time
When you don’t use the product for a long time, use it after replacing
the filter and cleaning the products such as an air dryer outlet, a
nozzle, seat according to each cleaning methods (See P.26).
If there is a foreign material or a water drop on the signal transmitter of the remote
control or on the signal receiver of the control panel of the bidet’s remote control,
the remote control communication may be inhibited.
The remote control may not work properly where there is strong light such as three-
wavelength lamp light or strong electromagnetic waves are created.
Remove the protective film from the control panel before use.
Tips
13
Download from Www.Somanuals.com. All Manuals Search And Download.
OPERATION/INDICATION PART
Remote Control Indication Part/Operation Part
Indication part
Operation part
1
Stop button
Remote control signal
transmitting part
1
Rear cleansing function
selection button
2
3
WiDE function selection button
Air dryer function selection
button
4
5
Front cleansing function
selection button
Nozzle position indicator
2
Seat temperature adjustment
indicator
3
4
Signal transmitting
status indicator
WiDE function indicator
7
8
3
2
1
Battery status indicator
+
Air function selection
5
6
indicator
Water pressure/air dryer
temperature indicator
Warm water temperature
adjustment indicator
9
7
Water pressure/air dryer
temperature adjustment
button
6
Nozzle position button
Seat temperature adjustment
button
8
9
Water temperature adjustment
button
10 move function selection button
Power selection button
11
Auto cleansing function
selection button
12
+
Air function selection button
13
14
Download from Www.Somanuals.com. All Manuals Search And Download.
Indication part
Remote control signal transmitting part
It is the transmitting window that transmits signals when the remote control buttons are pressed.
1
Nozzle position indicator
If you press the nozzle position button, the lamp is turned on in 5 steps.
2
Seat temperature adjustment indicator
When you press the seat temperature adjustment button, you can adjust the indicator (L M H
3
Off).
WIDE function indicator
When you press the WIDE function selection button, the indicator is turned on (Straight line step1
step2).
4
+
Air function selection indicator
5
6
3
2
1
+
When you press Air function selection button, the indicator is turned on.
3
2
1
Water pressure/air dryer temperature indicator
If you press the water pressure/the air dryer temperature adjustment button, the temperature lamp is
turned on in the step1 step2 step3 order.
It is used as the water pressure adjustment indicator when you operate the front cleansing/rear
cleansing function, and it is used as the water temperature adjustment indicator when you
operate the air dryer function.
Signal transmitting status indicator
It indicators that you transmit the signal.
7
8
9
Battery status indicator
The battery status indicator is turned off and on and it notifies the battery replacement time.
Warm water temperature adjustment indicator
When you press the warm water temperature adjustment button, you can adjust the temperature
lamp (L M H Off).
15
Download from Www.Somanuals.com. All Manuals Search And Download.
OPERATION/INDICATION PART
Operation Part
Stop button
Stops all operating functions.
1
Rear cleansing function selection button
Use it to select the desired rear cleansing function.
2
WIDE function selection button
3
Use it if you want to control the water spraying range when you use the cleansing functions. You can
select the range of the force of the flowing water of 3 steps in straight line step1 step2 order
using WIDE function selection button. Whenever you press the button, the indicator of the selected
current spraying range is turned on.
Air dryer function selection button
Use it to select the air dryer function. It helps dry the wet after using the front cleansing/rear
cleansing function.
4
Front cleansing function selection button
Use it to select the cleansing function for woman.
5
Water pressure/air dryer temperature adjustment button
6
If you press the water pressure/the air dryer temperature adjustment button, the temperature lamp
is turned on in the step1 step2 step3 order and 3 steps water pressure/air dryer adjustment can
be performed.
Nozzle position button
7
Use when you want to adjust the nozzle position during the operation of the rear cleansing/front
cleansing function. When you press the nozzle position button, you can adjust the nozzle position as
5 steps.
Seat temperature adjustment button
Use it when you want to adjust the toilet seat temperature. When you press the seat temperature
8
adjustment button, you can adjust the seat temperature (L M H Off).
You can adjust the seat temperature regardless of the operation of other function.
Water temperature adjustment button
Use it when you want to adjust the water temperature. When you press the water temperature
adjustment button, you can adjust the water temperature (L M H Off).
9
Move function selection button
10
Use it to select the movie function. When you press the move function selection button, as the nozzle
is moved front and rear while you operate the front cleansing/rear cleansing function, you can clean
the more wide areas.
Power selection button
Use it to turn the remote control and the product ON/OFF.
11
When you press the power selection button during functions operation, the functions stop and
the power is turned off.
Auto cleansing function selection button
Use it to select the auto cleansing function. When you press the auto cleansing function selection
button, the rear cleansing 1 minute, the air dryer 2 minutes is operated successively.
12
13
+
Air function selection button
+
+
Use it to select Air function. When you press Air function selection button, as the air is mixed with
the cleansing water during the rear cleansing/front cleansing function operation, it can clean with
the more soft and strong force of the water.
+
You can select the Air function regardless of the operation of other function.
16
Download from Www.Somanuals.com. All Manuals Search And Download.
Product Indication Part/Operation Part
Remote control signal
Remote control signal receiving part
1
3
receiving part
Power selection button
1
Power selection indicator
2
Rear cleansing function
selection button
Nozzle cleaning button
3
2
Indication Part
Remote control signal receiving part
It receives the signals from the remote control.
1
Power selection indicator
When the power is turned on, the indicator is lightened.
2
When you heat the water, the power selection indicator is turned on and off.
If the power selection indicator is turned on and off with the alarm, as it notifies the product
abnormality, please pull out the power plug and call the service center.
Remote control signal receiving part
It receives the signals from the remote control.
3
Operation Part
Power selection button
Use it to turn the remote control and the product ON/OFF.
1
When you press the power selection button during the front cleansing/rear cleansing/auto
cleansing function operation, the function only stop and the power isn’t turned off.
Rear cleansing function selection button
Use it to select the rear cleansing function.
2
3
Nozzle cleaning button
Use it when you want to clean the nozzle.
If you press the nozzle cleaning button, as the nozzle come forth and stop, you can clean
conveniently (See P.25).
17
Download from Www.Somanuals.com. All Manuals Search And Download.
HOW TO USE
For Rear Cleansing
Rear cleansing
Sit on the seat and press the rear cleansing function selection button on the
remote control.
The rear cleansing nozzle will remove the cold water remaining
-
-
-
Inside the nozzle before the water stream is ejected so that you can have
rear cleansing with water set to a desired temperature.
The cleansing water is ejected for about 1 minute and then automatically
stopped.
An automatic nozzle cleaning is performed for about 5 seconds after
cleansing when the nozzle retracts itself.
Adjust the nozzle position by pressing the nozzle position
button.
Press the wide function selection button to adjust the desired water ejection range.
+
You can select the air mixed water type by pressing Air function selection button.
If the rear cleansing function selection button is pressed again while in cleansing operation, additional
rear cleansing starts again for another 1 minute.
While in cleansing, users can adjust the water temperature, water pressure, and nozzle position according
to their preference.
move
Press the move function selection button on the remote control.
-
The nozzle moves back and forth, providing a wider range of cleansing.
It will be worked continuously while the cleansing function is operated.
You can adjust the nozzle position by pressing the nozzle position
button.
To stop the move function, press the move function selection button again.
Air dryer
Press the air dryer function selection button on the remote control.
-
Warm air blows for about 2 minutes to dry the wet part.
If you wipe out the wet before turning on the air dryer function, you can
finish drying faster.
You can adjust the air dryer temperature by pressing the water pressure/air
dryer
buttons.
If the air dryer function selection button is pressed again while in drying
operation, additional drying starts again for another 2 minutes.
If the air dryer function selection button is pressed while in cleansing
operation, the cleansing function is stopped and drying starts immediately.
Stop
If you want to stop the operation in use, press stop button.
-
It stops all operating functions.
The air dryer function is stopped in 2 seconds after pressing the stop
button.
18
Download from Www.Somanuals.com. All Manuals Search And Download.
For Front Cleansing
Front cleansing
Sit on the seat and press the front cleansing function selection button on the
remote control.
-
The front cleansing nozzle will remove the cold water remaining inside
the nozzle before the water stream is ejected so that you can have front
cleansing with water set to a desired temperature.
The cleansing water is ejected for about 1 minute and then automatically
stopped.
An automatic nozzle cleaning is performed for about 5 seconds after cleansing when the nozzle retracts
itself.
-
-
Adjust the nozzle position by pressing the nozzle position
button.
Press the wide function selection button to adjust the desired water ejection range.
+
You can select the air mixed water type by pressing Air function selection button.
If the front cleansing function selection button is pressed again while in cleansing operation, additional
front cleansing starts again for another 1 minute.
While in cleansing, users can adjust the water temperature, water pressure, and nozzle position according
to their preference.
move
Press the move function selection button on the remote control.
-
The nozzle moves back and forth, providing a wider range of cleansing.
It will be worked continuously while the cleansing function is operated.
You can adjust the nozzle position by pressing the nozzle position
button.
To stop the move function, press the move function selection button
again.
Air dryer
Press the air dryer function selection button on the remote control.
-
Warm air blows for about 2 minutes to dry the wet part.
If you wipe out the wet before turning on the air dryer function, you can
finish drying faster.
You can adjust the air dryer temperature by pressing the water pressure/air
dryer
buttons.
If the air dryer function selection button is pressed again while in drying
operation, additional drying starts again for another 2 minutes.
If the air dryer function selection button is pressed while in cleansing operation, the cleansing function is
stopped and drying starts immediately.
Stop
If you want to stop the operation in use, press stop button.
-
It stops all operating functions.
The air dryer function is stopped in 2 seconds after pressing the stop
button.
19
Download from Www.Somanuals.com. All Manuals Search And Download.
INSTALLATION
installing the product
Tighten the fixing nuts firmly so that the bidet body won’t be shaky on
the toilet.
Product installation place
As the bidet should be installed on the toilet, take caution not to have
water splashed on the bidet.
After installation
Keep the removed existing toilet seat in a shaded place to prevent its
damage.
Keep the existing
toilet seat in the
shaded place
Cold water pipe
Please connect to the cold water pipe (If the product is connected to the
warm water pipe, the filter and hose may be damaged).
Warm
water
To secure the optimum performance of the product, consult with an installation
expert for further installation.
There may be some water remaining inside the filter which was used to test the
product during the inspection process at the factory.
Tips
-
The remaining water does not mean that the product was previously used.
20
Download from Www.Somanuals.com. All Manuals Search And Download.
Uninstallation Existing Toilet Seat
1. Remove the fixing nuts of the existing seat
1
and separate the existing toilet seat and
2
the seat cover
.
2
Keep the removed seat and the removed seat cover in a shaded
place.
1
Installation the Product
1
1. Turn off the main water supply valve on the water
2
pipe and separate the existing water tank hose
.
2
1
2. Connect the rubber packing, T-shaped connector, and
water tank hose to the existing main water supply
pipe. Please connect the bidet hose to the T-shaped
connector.
Please insert the rubber packing between the water pipe and the
T-shaped connection pipe necessarily.
Firmly rotate the nuts below and on top of the T-shaped connector to the end clockwise.
3. Please assemble by turning the mF filter on the filter
holder to the arrow direction as the figure.
If the filter is assembled loosely, the bidet may not function
normally. Firmly connect the filter.
4. Please connect the filter assembled the filter holder in
the rear of the product and fix using the filter clip.
Check if the filter clip is inserted correctly. When the main water
supply valve is opened, if the filter clip is loosely fitted, as the filter
holder may be separated, the water may splash and it may cause
injury.
It is not possible to separate the filter clip once it is fitted to the product.
When the problem occurs due to the filter clip, call the service center.
21
Download from Www.Somanuals.com. All Manuals Search And Download.
INSTALLATION
Installation the Product
5. Push fixing screw into the fixing slider. And slide the
fixing slider with fixing screw to be hooked in the
installation boad.
6. insert fixing screw into the holes and pushfixing
rubber, fixing washer into the fixing screw to prevent
from wobbling of the main body. Then tighten up the
fixing nuts.
If you do not tighten nuts. It may cause injury or damage to
customer.
7. Please connect the bidet hose to the filter fixing
stopper.
Please shorten the bidet hose as soon as possible. If the bidet
hose is long, it may cause noises.
8. Open the main water supply valve.
9. Connect the power plug to the electrical outlet.
Make sure to use a grounded electrical outlet. In the case of short
circuit, grounding prevents electric shock or injury.
Grounding
terminals
Make sure to use a dedicated electrical outlet with grounding
terminals.
If it is unavoidable to use an extension cord, use one with
grounding terminals for power rating of 125 V~, 7 A or higher.
22
Download from Www.Somanuals.com. All Manuals Search And Download.
This installation method was explained on the basis of the case installed the remote
control mount for the right hand.
After removing the fixing screw and separating the product form the toilet, separate
and install the remote control mount.
Tips
Installation the Remote Control Mount
1. Remove the fixing screw (Ø 6) that fixes the remote
control mount on the bottom of the bidet.
2. Remove the remote control mount from the bidet.
3. On the opposite side of the remote control mount
rotation axis, remove the screw that fixes the axis and
the cover-axis.
4. Remove the cover-axis from the remote control
mount.
23
Download from Www.Somanuals.com. All Manuals Search And Download.
INSTALLATION
Installation the Remote Control Mount
5. insert the rotating axis in the opposite side after
pulling out it from the remote control mount.
Insert the axis with the thicker part facing the
back of the remote control mount.
6. insert the cover-axis in the hole on the opposite side
of the rotating axis.
Align two projections with the two grooves on the axis when
inserting the cover-axis.
7. Fix the rotation axis and the cover-axis with a screw.
Please tighten the cover-axis firmly. If the screw is loosely
assembled, the remote control mount may be separated and is
dropped, which may cause product damage or a bodily injury.
8. Please separate the rubber stopper from the opposite
side of the bidet installed the remote control mount
before.
Please be sure to insert the separated rubber stopper to the
opposite remote control mount fixing groove. Otherwise, the
product may break.
9. insert the rotation axis of the remote control mount
and fix the remote control mount with the fixing
screw (Ø 6) on the bidet bottom.
Please tighten the fixing screw (Ø 6) firmly. If the screw is loosely
assembled, the remote control mount may be separated and is
dropped, which may cause product damage or a bodily injury.
24
Download from Www.Somanuals.com. All Manuals Search And Download.
CLEANING METHOD
Nozzles
If excessive force is exerted on the nozzle when cleaning it, the nozzle may not be
working properly or be broken. Hold the nozzle lightly to clean it.
When you clean the nozzle, the nozzle cleaning water is sprayed (But the nozzle
cleaning water doesn’t be sprayed and only nozzle is extended in the feed water
stop status).
Tips
1. Press nozzle cleaning button on the right side of the
bidet.
The nozzle cleaning water is sprayed and the front cleansing nozzle
sticks out to its full length.
Clean the front cleansing nozzle.
2. Press nozzle cleaning button one more.
-
The nozzle cleaning water is sprayed and the front cleansing
nozzle retracts itself, and the rear cleansing nozzle sticks out to its
full length.
-
Clean the rear cleansing nozzle.
3. if you press the stop button on the remote control
or nozzle cleaning button on the product once more
after cleaning the rear cleansing nozzle, the nozzle
cleaning water is sprayed and the rear cleansing
nozzle retracts itself.
-
If no button is pressed for 2 minutes after the nozzle cleaning
starts, the nozzle retracts itself automatically.
Product body
Apply the neutral detergent to a soft cloth or sponge
and clean the product.
If you use the detergent except for the neutral detergent, the
product deformation and the damage may be occurred.
Do not use thinner, or benzene. Do not clean the product using coarse scrub or
detergent with abrasives.
Tips
25
Download from Www.Somanuals.com. All Manuals Search And Download.
CLEANING METHOD
Uninstallation the product
1. Unplug the power plug from the outlet.
2. Close the main water supply valve.
3. Place a big wash basin (1 L or more) under the rear
drain hole of the bidet.
1
4. Turn the drain stopper to counter clockwise by 90 °
2
and pull out it in the direction of to remove it.
-
Please assemble the drain stopper to the product again after
draining.
5. Please separate the product by removing the fixing
nuts in the fixing screw and lifting the bidet.
-
-
-
Please pull out the power plug and separate the bidet hose from
T-shaped connector before separating the product.
When storing the product, separate the filter fixed stopper and MF
filter from the bidet and store them with installation materials.
Exercise caution not to lose fixing screws and fixing nuts.
When you don’t use the product for a long time, unplug after turning off the main water
supply valve and emptying the water inside the water tank.
Tips
26
Download from Www.Somanuals.com. All Manuals Search And Download.
MAINTENANCE
Freezing Protection Function
Coway bidet has a built-in anti-freezing program.
When the water temperature of the water tank falls
below 5 ºC, the heater automatically operates to
prevent freezing burst.
Check that the power is turned on. If the power is turned off, the
anti-freezing program does not work and the bidet may have
freezing burst or malfunctions in a cold environment.
27
Download from Www.Somanuals.com. All Manuals Search And Download.
FILTER REPLACEMENT METHOD
1. Please pull out the power plug and turn off the main
water supply valve.
2. Separate the mF filter from the filter holder by
rotating the mF filter to replace to the arrow direction.
3. Please rotate and insert new mF filter to the filter
holder like the next arrow direction to the end not to
be shaken.
4. Use it after opening the main water supply valve and
plugging in the power cord.
28
Download from Www.Somanuals.com. All Manuals Search And Download.
TROUBLESHOOTING
The bidet may operate abnormally due to the minor causes not because of the product
malfunction but because of the fact that the user is not familiar with the product use. In such a
case, problems can be solved easily even without the help from the Service Center by checking
the following items. If you can’t solve the problem after checking the following items, please call
the Service Center.
Symptom
Check
Measures to take
Plug in the power cord.
•
•
Is the power plug connected to
the electrical outlet?
Is it a power failure?
Check whether it is a power failure.
The product is not
working.
Check whether buttons other than
the Power button work well. If one
of the other buttons is pressed
down, the Power button does not
work. In this case, call our service
center.
•
Is the control panel turned off?
•
•
Does the main water supply
valve closed?
Open the main water supply valve.
Remove the foreign material by
cleaning the nozzle opening with a
toothbrush.
Is the nozzle clogged with
foreign material?
Water is not
ejected.
Check whether the suspension of
water supply is performed or not.
(It takes about 1 – 2 minutes for the
water tank to be filled with water
after installation before water can
be ejected.)
•
After installation, water is not
ejected.
•
•
•
•
Is the water pressure set too
low?
Adjust the water pressure properly.
Remove the foreign material by
cleaning the nozzle opening with a
toothbrush.
The water pressure
is weak.
Is the nozzle clogged with
foreign material?
Is the filter clogged with foreign
material?
Replace the filter correctly.
Please adjust as the proper
temperature by pressing the seat,
the warm water temperature
adjustment button.
Isn’t the seat and warm water
temperature adjustment button
set to“OFF”status?
The seat and water
are not warm.
29
Download from Www.Somanuals.com. All Manuals Search And Download.
TROUBLESHOOTING
Symptom
Check
Measures to take
Please adjust as the proper
temperature by pressing the air
dryer temperature adjustment
button.
•
Isn’t the air dryer temperature
adjustment button set to“OFF”
status?
The air from the air
dryer is cold.
Check that the rubber packing is
inserted in the T-shaped connector
and firmly tighten the nut again.
•
•
Water leaks on the T-shaped
connector.
Water leaks in areas
other than the
nozzles.
Water leaks on the connection
part of the bidet hose.
Push the bidet hose to the
connection part completely.
Check whether the filter was
damaged or not.
•
•
Water leaks on the filter.
What water comes out between the nozzles after cleansing is to clean
the nozzles, not a malfunction.
Water comes out
while the bidet is
not in use.
•
In some cases, water drops around the nozzles may fall down in the
toilet. It is that the water drops remaining on the nozzle surface after
the nozzle cleaning drop into the toilet. It is not a malfunction.
If you plug in the
power cord, the
rear cleansing
nozzle come out
and go in.
•
•
It is the initialization process of the nozzle position, not a product
malfunction.
There is a noise
coming from the
bidet.
While the water heater is in operation, a noise is generated in a normal
condition.
If the bidet is in power saving mode, as the seat and the warm water temperature
are set to low temperature, it may be felt relatively cold when you sit on. If the bidet
power saving mode is cancelled, the temperature set at the last use is maintained.
Tips
For canceling the power saving mode, see page 11 on this manual.
30
Download from Www.Somanuals.com. All Manuals Search And Download.
SPECIFICATION
Product name
Bidet
Model name
Power rating
BA08-AR/AE
120 V~, 60 Hz
850 W
Power consumption
Water pressure
0.11 MPa - 0.68 MPa
BA08-AR
BA08-AE
525 mm (W) X 500 mm (D) X 142 mm (H)
525 mm (W) X 530 mm (D) X 142 mm (H)
5.7 kg - 6.3 kg
Product
dimensions
Weight (NET)
Rear cleansing
Front cleansing
Maximum 0.7 L/min, automatic nozzle cleaning function
Maximum 0.7 L/min, automatic nozzle cleaning function
Rear cleansing 1 min, Front cleansing 1 min
Micom control, 3 levels control
Timing
Water pressure control
Wide (spray range control)
3 level spray range control(straight-level 1-level 2)
Air mixed water type
Warm water
cleansing
device
+
Air
4 levels
Warm water temperature adjustment
(off : room temperature, low : 33 ºC, medium : 36 ºC, high : 39 ºC)
Power consumption of cistern heater
Cistern capacity
800 W
1 L
Safety device
Bi-metal, temperature sensor, temperature fuse(overheating prevention)
Warm air temperature control
Timing
3 levels
Air dryer 2 mins
180 W
Warm air dryer
Warm seat
Power consumption of dryer heater
Safety device
Bimetal, temperature fuse(overheating prevention)
Seat temperature control
(after seating)
4 levels
(off : room temperature, low : 34 ºC, medium : 37 ºC, high : 40 ºC)
Power consumption of dryer heater
Safety device
50 W
Temperature sensor, temperature fuse(overheating prevention)
4 months (2.5 ton/month, impurity rate : under 0.5 NTU)
(L) 136 mm × (Ø) 48 mm
Life span
MF filter
Dimension
2 fixing screws, 2 fixing rubbers, 2 fixing washers, 2 fixing nuts,
2 fixing sliders, Bidet hose, T-shaped connector, Rubber packing,
Filer clip, Filter fixing stopper, Nano silver ceramic MF filter,
Screw (Ø 6), 2 batteries(AA size)
Accessories
Installation materials
Nozzle position adjustment, Move, Nozzle cleaning, Silent mode,
Seat sensor lock, Bidet/remote control power saving mode,
Remote control, Auto cleansing function
Other function
Temperature
0 ºC - 40 ºC
These specifications may be changed to improve the performance of the product.
Earlier clogging may occur in MF filter depending on quality and consumption of water.
31
Download from Www.Somanuals.com. All Manuals Search And Download.
MEMO
32
Download from Www.Somanuals.com. All Manuals Search And Download.
MEMO
33
Download from Www.Somanuals.com. All Manuals Search And Download.
WARRANTy CARD OR WARRANTy LETTER
ONE yEAR LimiTED WARRANTy
BiDET BA08-AR/AE (“PRODUCT”)
Model :
Serial Number :
Customer Name :
Date of Purchase :
(“OWNER”)
What This Warranty Covers :
Limitations and Exclusions :
Commencing with the date of purchase of the
Product and continuing for a period of one year,
if manufacturing defects in the Product cause the
Product to not operate properly for its intended
use, then subject to the exclusions, conditions,
and limitations contained herein, COWAY at its
sole option will repair or replace the Product.
TO THE EXTENT PERMITTED BY APPLICABLE LAW,
COWAY DISCLAIMS ANY OTHER WARRANTY
EXPRESS OR IMPLIED, THAN THAT PROVIDED
FOR HEREIN. THIS WARRANTY IS IN LIEU OF AND
EXCLUDES ALL OTHER WARRANTIES, GUARANTEES,
CONDITIONS AND REPRESENTATIONS, EXPRESS
OR IMPLIED, ORAL OR WRITTEN, STATUTORY OR
OTHERWISE, INCLUDING BUT NOT LIMITED TO
ANY IMPLIED CONDITIONS OR WARRANTIES AS
TO THE MERCHANTABILITY OR FITNESS FOR A
PARTICULAR PURPOSE OF THE COWAY PRODUCT.
SOME STATES DO NOT ALLOW LIMITATIONS ON
HOW LONG AN IMPLIED WARRANTY LASTS, SO
THE ABOVE LIMITATION MAY NOT APPLY TO YOU.
COWAY DOES NOT AUTHORIZE ANY PERSON
INCLUDING ITS REPRESENTATIVES, TO MAKE ANY
REPRESENTATION OR TO OFFER ANY WARRANTY,
CONDITION OR GUARANTY IN RESPECT OF THE
PRODUCT OTHER THAN THIS WARRANTY. THIS
LIMITED WARRANTY SHALL BE THE OWNER’S
SOLE AND EXCLUSIVE REMEDY AGAINST
COWAY AND COWAY SHALL NOT BE LIABLE FOR
ANY CONSEQUENTIAL, EXEMPLARY, SPECIAL,
INCIDENTAL OR OTHER DAMAGES INCLUDING,
BUT NOT LIMITED TO, LOSS OF PROFITS, AND
LOSS OF USE. INCIDENTAL, CONSEQUENTIAL
AND EXEMPLARY DAMAGES SHALL NOT BE
RECOVERABLE EVEN IF THE REMEDIES OR THE
ACTIONS PROVIDED FOR IN THIS WARRANTY FAIL
OF THEIR ESSENTIAL PURPOSE. SOME STATES DO
NOT ALLOW THE EXCLUSION OR LIMITATION OF
INCIDENTAL OR CONSEQUENTIAL DAMAGES, SO
THE ABOVE LIMITATION OR EXCLUSION MAY NOT
APPLY TO YOU. COWAY SHALL NOT BE LIABLE
FOR ANY DAMAGES WHICH ARE BASED UPON
NEGLIGENCE, BREACH OF WARRANTY, STRICT
LIABILITY OR ANY OTHER LEGAL THEORY OF
LIABILITY OTHER THAN THE EXCLUSIVE LIABILITY
SET FORTH IN THIS WARRANTY.
Decisions as to the extent of repair or replacement
required will be made solely by COWAY.
The remedy under this Warranty is available only
for that portion of the Product exhibiting defects
at the time of the warranty claim. The replacement
Product as well as any remaining original Product
will be warranted only for the original one year
warranty period. This limited warranty applies
only to Product used for an application specified
by COWAY for the Product and applied in strict
accordance with COWAY published specifications
in effect at the time of application. IF PRODUCT IS
USED FOR OTHER THAN ITS INTENDED PURPOSE,
IT IS SOLD AS IS AND WITHOUT ANY EXPRESS
OR IMPLIED WARRANTIES, INCLUDING OF
MERCHANTABILITY OR FITNESS FOR A PARTICULAR
PURPOSE.
What This Warranty Does Not Cover :
This Warranty warrants that the Product will be
free from manufacturing defects which affect the
ability of the Product to operate for its intended
use; it is not a warranty that the Product will never
require repairs or to undertake responsibilities,
liabilities or obligations other than those
specifically identified in the preceding section.
COWAY is not responsible or liable for personal
injury or property damage of any kind, even if
arising from a breach of this Warranty.
34
Download from Www.Somanuals.com. All Manuals Search And Download.
Limitations on Implied Warranties :
Waiver :
Any implied warranty of merchantability or
fitness for a particular purpose or use, shall be
limited to the duration of the foregoing express
written warranty.
COWAY’s failure at any time to enforce or rely
upon any of the terms or conditions stated
herein shall not be construed to be a waiver of
its rights hereunder.
Conditions of Warranty :
Obtaining Warranty Service and OWNER’S
Duties :
COWAY’s continuing liability under this
Warranty is conditioned upon the following:
If the Product fails to operate for its
intended purpose, then notify COWAY or its
Representative Agency, within 48 hours or
within the next business day after discovery
of any defect in the Product. The OWNER must
give written notice to COWAY no later than
thirty (30) days after a defect is discovered or
should by reasonable diligence have been
discovered. Claims under this Warranty will
require proof of purchase by the OWNER.
a) The defect or damage is not caused
by or is the result of: abnormal use or
conditions; improper storage, unauthorized
modifications or repair; misuse, neglect,
accident, alteration, improper installation
or other acts that are not the fault of Coway
or the manufacturer of the product or that
are not covered by the manufacturer’s
warranty;
b) The Product has not been altered, modified
or repaired without prior written approval
of COWAY;
c) The OWNER has notified COWAY in writing
of any failure of the Product covered by this
Warranty within thirty (30) days following
such failure;
d) There has been no misuse, abuse or
negligence with respect to the Product on
the part of the OWNER.
35
Download from Www.Somanuals.com. All Manuals Search And Download.
MADE IN KOREA
003
1021214
Download from Www.Somanuals.com. All Manuals Search And Download.
|