Owner’s Instruction
Manual
CONF410-PAK
“KEEPING YOU CONNECTED FOR OVER 100
YEARS”
Download from Www.Somanuals.com. All Manuals Search And Download.
TABLE OF CONTENTS
Important Safety Instructions ......................................................................... 1
Installation ...................................................................................................... 3
Checklist of Parts .......................................................................................................... 3
To Ensure Best Performance ......................................................................................... 3
Setting Up...................................................................................................................... 3
Positioning the Conference Phone ................................................................................ 4
Pulse/Tone Switch ......................................................................................................... 4
Ringer Hi/Lo/Off ........................................................................................................... 4
Standard Telephone ....................................................................................................... 5
External Microphone ..................................................................................................... 5
Telephone Part Identification ........................................................................................ 6
Telephone Features ......................................................................................... 7
To Place A Call .............................................................................................................. 7
To End A Call ................................................................................................................ 7
To AnswerA Call ........................................................................................................... 7
To Adjust Volume .......................................................................................................... 7
To Mute A Conversation ............................................................................................... 7
To Use Flash .................................................................................................................. 8
To Use Redial ................................................................................................................ 8
To Use Pulse/Tone Button ............................................................................................. 8
Telephone Service Problems .......................................................................... 9
Maintenance Information ............................................................................. 10
Telephone Repair .......................................................................................... 11
FCC Information .......................................................................................... 12
Limited Warranty .......................................................................................... 14
Download from Www.Somanuals.com. All Manuals Search And Download.
IMPORTANT SAFETY INSTRUCTIONS
Always follow basic safety precautions when using your telephone equipment to
reduce the risk of fire, electrical shock, and injury.
1.
2.
3.
4.
5.
Read and understand all instructions in the Owner’s Instruction Manual.
Read all warnings and follow all instructions marked on the product.
Unplug this product from the wall outlet before cleaning. Use a damp cloth
for cleaning. Do not use liquid or aerosol cleaners.
Do not use the telephone near water. For example, do not use near a bathtub,
wash bowl, kitchen sink, laundry tub, swimming pool, or in a wet basement.
Do not place this product on an unstable cart or stand. The product may fall
causing serious damage to the product.
Use only the type power source indicated on the label. If you are not sure of
the type power supply to your home, consult your dealer or local power
company.
6.
7.
Do not place any objects on the telephone line cord. Do not locate the
telephone where the line cord will be walked on.
Do not block or cover ventilation slots and openings in the bottom of the
telephone. The openings should never be blocked by placing the telephone on
a bed, sofa, rug, or other similar surfaces. The telephone should never be placed
near or over a radiator or heat register. The telephone should never be placed in
a built-in installation unless proper ventilation is provided.
8.
Never spill liquid on the telephone or push objects of any kind through
ventilation slots. Liquid or objects may touch dangerous voltage points or short
out parts that could result in a risk of fire or electrical shock.
1
Download from Www.Somanuals.com. All Manuals Search And Download.
9.
Donotdisassemblethisproduct.Openingorremovingcoversmayexposeyou
to dangerous voltages or other risks. Incorrect reassembly can cause electrical
shock when the product is subsequently used.
10.
11.
Do not overload outlets and extension cords. Some telephones require AC
power from an outlet. Overloading the outlets can result in the risk of fire or
electric shock.
Avoidusingatelephoneduringalocalthunderstorm. Theremaybearemote
risk of electrical shock from lightning.
12.
13.
Do not use a telephone to report a gas leak in the vicinity of the leak.
Unplug the telephone from the wall outlet and refer servicing to qualified
service personnel under the following conditions:
•
•
•
When the line cord is frayed or plugs damaged.
If liquid has been spilled into the telephone.
If the telephone has been exposed to rain or water.
•
If the telephone does not operate properly by following the operating
instructions. (Adjust only those controls covered by the operating
instructions. Improper adjustment of other controls may result in
damage and will often require extensive work by a qualified
technician to restore the product to normal operation.)
•
•
If the telephone has been dropped or the housing damaged.
If the telephone exhibits distinct change in performance.
SAVE THESE INSTRUCTIONS
2
Download from Www.Somanuals.com. All Manuals Search And Download.
INSTALLATION
Checklist of Parts
•
•
•
•
•
Conference Unit
AC Adapter
Telephone Line Cord
Note: If any of the parts are missing,
please contact your dealer.
User’s Guide
Optional External Microphone and Microphone Line Cord
To Ensure Best Performance
√
Locate the unit in a quite environment, with soft furnishings, such as
sound absorbing walls and ceilings.
√
√
√
Place the unit at the center of a table or desk.
Keep papers and other objects away from the unit.
Seat all participants no more than 3 meters from the unit or 2 meters
from
the optional extension microphone.
√
√
√
Do not place on carpet or other similar surfaces.
Speak at normal conversation levels.
Make sure that the unit is at least 1 meter away from other electrical
products to avoid interference.
√
√
√
Direct your voice toward the microphone.
Do not move the unit during a call.
Avoid noisy environmental background during conversations.
Setting Up
1. Connect the telephone line cord into the telephone jack on the conference
telephone and into the telephone jack on the wall.
2. Plug theAC power adapter into the power jack of the conference telephone
and nearby electrical outlet. (A beep will be heard from the conference tele-
phone when the AC adapter is plugged in.)
3
Download from Www.Somanuals.com. All Manuals Search And Download.
To Tel
AC 9V
To Line
Positioning the Conference Telephone
For best performance, place the conference telephone in the center of the table.
Seat all participants no more than 3 meters from the unit or 2 meters from the
optional external microphone. Make sure that the unit is at least 1 meter away
from other electrical products to avoid interference.
Pulse/Tone Switch
If your telephone line accepts touch-tone dialing, set the PULSE/TONE switch
to the Tone position.
If your telephone line requires rotary (pulse) dialing, set the PULSE/TONE
switch to the Pulse position.
If you are unsure which system you have, set the switch to the TONE position.
Lift the handset. When you get a dial tone, dial a telephone number. If the
dial tone continues, move the switch to PULSE, and then dial the telephone
number again.
Ringer Hi/Lo/Off
Be sure the RINGER switch is set to the HI or LO position to receive calls.
Set the Ringer switch to the OFF position when you do not want to be inter-
rupted by the phone ringing. Remember to set the ringer switch back to HI or
LO when you want to receive calls again.
4
Download from Www.Somanuals.com. All Manuals Search And Download.
Setting Up Optional Equipment
1. Standard Telephone
•
To hold private conversations, connect a standard analog telephone into
the “TO TEL” jack on the conference phone via a line cord.
•
up
To transfer a call from the Conference unit to an external telephone - Pick
the handset while the Conference unit is ON. Turn off the Con-
ference unit
ferred to the
by pressing the ON/OFF button, and the call will be trans-
handset.
•
To transfer a call from a telephone to the Conference unit - While the
private call is in progress, turn on the Conference unit. The call will then
be trans- ferred, and the LED on the conference unit will light. Hang up
the handset.
2. External Microphone
An external microphone can be purchased separately to increase conversation
coverage. (A maximum of one external microphone can be connected.) The
external microphone is active when the Conference unit is ON.
•
Plug the microphone line cord into the external microphone jack on the
Conference unit.
•
Seat all participants no more than 2 meters from the optional external
microphone.
Pulse/Tone Switch
External
Microphone
Ringer Hi/Lo/Off
5
Download from Www.Somanuals.com. All Manuals Search And Download.
TELEPHONE PART IDENTIFICATION
Speaker
Keypad
P-T Button
Mute
On/Off
Button
Flash
Microphone
Volume
Buttons
Redial
6
Download from Www.Somanuals.com. All Manuals Search And Download.
TELEPHONE FEATURES
To Place A Call
Press the On/Off button and you will hear a dial tone. The On/Off LED will
light. Dial the telephone number using the keypad.
To End A Call
Press the On/Off button. The On/Off LED will no longer be lighted.
To Answer A Call
When the Conference Telephone rings, press the On/Off button to answer the
call, and the LED indicator will light up to signal the unit is ON.
To Adjust Volume
To adjust volume level, use the up and down arrow keys until the desired level
is reached.
•
Speaker Volume should be adjusted while the call is in progress.
When you reach the maximum or minimum volume positions the unit will
beep three times.
To Mute A Conversation
To turn off the microphone(s) during a conversation, press the MUTE button
and the LED indicator will flash to signal that the user cannot be heard at the
other end of the line. To turn on the microphones, press the MUTE button
again.
7
Download from Www.Somanuals.com. All Manuals Search And Download.
To Use Flash
To use FLASH to switch between calls, the user must subscribe to Call Wait-
ing services from the local telephone company. FLASH can also be used for
three-way calling if subscribed to from the local telephone company. Press
FLASH to put the first call on hold. Then dial the second number and press
FLASH to begin the three-way call. Pressing the FLASH button will generate
a timed hookswitch signal of approximately 600 milliseconds.
To Use Redial
While the conference phone is on, press the REDIAL button to call the last
number dialed.
To Use Pulse/Tone Button
While in Pulse setting, tone entries can be entered by pressing the P/T button.
To use this feature, press the On/Off button. Dial the number. Press P/T. The
unit will send touch tone signals. At the end of the conversation, the phone
will automatically return to Pulse service.
8
Download from Www.Somanuals.com. All Manuals Search And Download.
TELEPHONE SERVICE PROBLEMS
No Dial Tone
•
•
Check that all connections are correct and secure.
Try a different line.
Echoes, Short Silences, or Clipped Speech
•
•
•
•
•
Don’t move the telephone while in use.
Keep your hands away from the unit during calls.
Keep papers, cups, etc., away from the unit.
Try calling again to see if another line provides a better connection.
If the other party is using lower-quality equipment there may be little
you can do.
Muffled Reception
•
•
Speak closer to the unit so microphones can pick up your speech.
Add more sound absorbency to the room.
Excessive Noises
•
Noisy equipment, such as computer or fan, may make it difficult for you
to hear the other party. Both parties should turn off any noisy equip-
ment.
•
Try calling again to see if another line provides a better connection.
Physical Damage
•
If physical damage causes internal parts to become accessible, disconnect
immediately and do not reconnect to the network until it has been re-
paired.
9
Download from Www.Somanuals.com. All Manuals Search And Download.
MAINTENANCE INFORMATION
Treat your telephone equipment with care for trouble-free performance.
Avoid putting near heating appliances and devices that generate electrical noise
(for example, motors and florescent lamps).
Clean your telephone equipment with a damp cloth. Stains may be removed
with a mild soap. Do not use liquid or aerosol detergents or cleaning agents.
Do not expose to direct sunlight or moisture
Retain the original package in case you need to ship it at a later date.
10
Download from Www.Somanuals.com. All Manuals Search And Download.
TELEPHONE REPAIR
DO NOT ATTEMPT TO REPAIR THIS PRODUCT YOURSELF. Conference Tele-
phones manufactured by CORTELCO must be returned to us for repair.
You can return your telephone to CORTELCO for repair or replacement in
accordance with our LIMITED WARRANTY.
CORTELCO warrants THIS PRODUCT against defects in material and workman-
ship in accordance with our LIMITED WARRANTY. If your telephone is returned
for repair, include a copy of your sales receipt containing the date-of-purchase. DO
NOT INCLUDE THE ORIGINAL SALES RECEIPT.
If date-of-purchase is not included, the factory date printed on the label on the
bottom of your telephone will be used as the date-of-purchase. The factory date
allows six months for distribution and sale of this product.
If you return your telephone for repair, the warranty period is not extended. The
original date-of-purchase continues to apply to your warranty.
OUT-OF-WARRANTY REPAIR We will repair this product for a nominal fee after
the LIMITED WARRANTY has expired if you send it to us in a complete and un-
damaged condition. The repaired Telephone will be shipped to you C.O.D., freight
collect.
RETURN-FOR-REPAIR PACKAGING If you are returning a unit to us for repair,
package it carefully, in the original carton. Be sure to include your return address,
a copy of the sales receipt showing date-of-purchase, and a note describing the
problem you have with your Telephone. Shipping must be prepaid. If the telephone
is in warranty, it will be repaired or replaced, at our option, at no cost to you, and
it will be returned shipping prepaid.
Ship your Conference Telephone (shipping prepaid) to:
CORTELCO
REPAIR CENTER
1703 SAWYER ROAD
CORINTH, MS 38834
11
Download from Www.Somanuals.com. All Manuals Search And Download.
FCC INFORMATION
Part 68 is a Federal regulation which requires equipment to be tested and registered
with the FCC prior to its connection to the network. This equipment complies with Part
68 of FCC rules. On the bottom of the telephone is a label that contains, among other
information, the FCC Registration Number and the Ringer Equivalence Number (REN)
for this equipment. You must, upon request, provide this information to your telephone
company.
The Ringer Equivalence Number, which is used to determine the number of devices
you may connect to your phone line, indicates the amount of power that your telephone
draws from the telephone company line during ringing. If you have more than one tele-
phone (or other terminal device) connected to the telephone company line, you should
total the ringer equivalence numbers (REN s), and be sure that the total is not more than
five. Your telephones may not ring if the total is more than five. Also, in some rural
locations, your telephone may not ring if the REN total is more than three.
RESTRICTIONS You must not connect your telephone to coin-operated lines or party
lines.
INSTALLATION This model telephone must be connected to the telephone company
lines through a modular jack. The required USOC for the modular jack is RJ11C for
desk mounting and RJ11W for wall mounting. The USOC number is printed on the label
on the bottom of your telephone.
IN CASE OF TROUBLE If your telephone should cause problems on the telephone
line, the telephone company can temporarily disconnect your service. The telephone
company must then notify and allow you to correct the problem.
This device complies with Part 15 of the FCC Rules. Operation is subject to the follow-
ing two conditions: (1) this device may not cause harmful interference, and (2) this
device must accept any interference received, including interference that may cause
undesired operation.
Warning: Changes or modifications to this unit not expressly approved by the party
responsible for compliance could void the user’s authority to operate the equipment.
12
Download from Www.Somanuals.com. All Manuals Search And Download.
Note: This equipment has been tested and found to comply with the limits for a CLASS
B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to
provide reasonable protection against harmful interference in a residential installation.
This equipment generates, uses, and can radiate radio frequency energy and, if not
installed and used in accordance with the instructions, may cause harmful interference
to radio communications. However, there is no guarantee that interference will not
occur in a particular installation. If this equipment does cause harmful interference to
radio or television reception, which can be determined by turning the equipment off and
on, the user is encouraged to try to correct the interference by one or more of the
following measures:
• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
• Connect the equipment into an outlet on a circuit different from that to which the
receiver is connected.
• Consult the dealer or an experienced radio TV technician for help.
NOTICE: This equipment meets the applicable Industry Canada Terminal
Equipment Technical Specifications. This is confirmed by the registration num-
ber. The abbreviation, IC, before the registration number signifies that regis-
tration was performed based on a Declaration of Conformity indicating that
Industry Canada technical specifications were met. It does not imply that
Industry Canada approved the equipment.
13
Download from Www.Somanuals.com. All Manuals Search And Download.
LIMITED WARRANTY
If you purchased this product new in the U.S. or Puerto Rico, Cortelco warrants it
against defects in material and workmanship for a period of one year from the
original date of purchase. This warranty is in lieu of all other express warranties.
During the warranty period, Cortelco agrees to repair or at its option, replace the
defective product, or any part without charge for parts or labor. This is your exclu-
sive remedy. This warranty does not cover damage resulting from accident, mis-
use, abuse, improper installation/operation, lack of reasonable care, the affixing of
any attachment not provided by Cortelco with the product and loss of parts. The
warranty is voided in the event any unauthorized person alters or repairs the unit.
Telephone companies use different types of equipment and offer various types of
services to customers. Cortelco does not warrant that this product is compat-
ible with the type of equipment of any particular phone company or the ser-
vices provided by it.
Cortelco disclaims any implied warranty, including the Warranty Of Merchantabil-
ity and the Warranty Of Fitness for a particular purpose, as of the date one year
from the original purchase of the product. Cortelco assumes no responsibility for
any special, incidental or consequential damages. This warranty gives you spe-
cific legal rights, and you may have other rights which vary from state to state.
If failure occurs and your Conference Telephone is in warranty, service shall be
provided by returning it shipping prepaid to:
Cortelco
Repair Center
1703 Sawyer Road
Corinth, Mississippi 38834
The product will be repaired or replaced if examination by Cortelco determines the
product to be defective.
CONF410-PAK, Rev. 1
Download from Www.Somanuals.com. All Manuals Search And Download.
|