Cortelco Telephone 1 4 Line Multi User User Manual

4-Line  
Multi-User Capable  
Telephone System  
John Smith  
972-555-2233  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Hold  
Holding a Call ................................................................................... 18  
Retrieving a Held Call ...................................................................... 18  
Hold Reminder Enable / Disable .............................................................. 18  
Intercom ................................................................................................... 18  
Predefined Station Select Buttons .................................................. 18  
Placing an Intercom Call .................................................................. 19  
Answering an Intercom Call ........................................................... 19  
Line Connection ...................................................................................... 19  
Line Status Indication .............................................................................. 20  
Mute ......................................................................................................... 20  
Message Waiting / New Call Indication................................................... 20  
Manually Turn Off Message Waiting Indicator (MWI)..................... 20  
Paging ...................................................................................................... 20  
Paging an Individual Extension ....................................................... 21  
Answering a Page to an Individual Extension................................ 21  
Page All Extensions ........................................................................ 21  
Answering an All Page (Meet Me Page) ........................................ 21  
Pause ...................................................................................................... 21  
Pause Time Programming ........................................................................ 21  
Prime Line Programming .......................................................................... 22  
Privacy / Privacy Release ....................................................................... 22  
Per Call Privacy Release................................................................. 22  
Enable / Disable Privacy for this Station ......................................... 22  
Redial  
Redial (one time only) ..................................................................... 22  
Auto Redial ...................................................................................... 22  
Ring Type Programming .......................................................................... 23  
Reset the Phone ...................................................................................... 23  
Ringer Enable / Disable ........................................................................... 24  
Speed Dial ................................................................................................ 24  
Dialing from a Speed Dial Location ................................................. 24  
Pulse to Tone Switching ......................................................................... 24  
Tone / Pulse Mode ................................................................................... 25  
Transfer .................................................................................................. 25  
Volume  
Handset / Headset Volume ............................................................. 25  
Ringer Volume ................................................................................. 25  
Speakerphone Volume .................................................................... 25  
Important Safety Instructions .......................................................................... 26  
Repair Of Your Telephone............................................................................... 27  
The FCC Wants You To Know ........................................................................ 28  
Wall Mounting Template ................................................................................... 29  
Limited Warranty ............................................................................................. 30  
3
Download from Www.Somanuals.com. All Manuals Search And Download.  
Introduction  
Button Descriptions and Functions  
31  
32  
33  
34  
1
2
3
4
5
6
16  
17  
7
8
18  
9
19  
10  
20  
21  
11  
12  
13  
14  
22  
23  
24  
25  
26  
15  
27  
28  
29  
30  
35  
Download from Www.Somanuals.com. All Manuals Search And Download.  
1. Caller ID Scroll - Displays and scrolls through the most recent to the oldest Caller ID.  
Also, allows the user to scroll left in the program menu after the program button is  
pressed.  
2. LCD Display - The LCD Display shows the calendar when the telephone is idle. The  
display will also show Caller ID data, numbers dialed, and is used to guide you  
through system programming.  
3. Caller ID Scroll - Displays and scrolls through the oldest to the most recent Caller  
ID. Also, allows the user to scroll right in the program menu after the program  
button is pressed.  
4. Program Scroll - This allows the user to scroll up through the program menu after  
pressing the program button. Also, dials the number displayed on the Caller ID by  
pushing dial.  
5. Program Scroll - This allows the user to scroll down through the program menu  
after pressing the program button. Also, shows Caller ID data of other lines ringing  
when multiple calls are received.  
6. New Call / Message Waiting Indicator This indicator lights solid when there is new  
Caller ID data. This indicator flashes when there is a message from CO Voice Mail  
(requires FSK signaling from your local telephone company). LCD will show Message  
Waiting with Line #.  
7. Shift - Accesses the second set of 12 Speed Dial bins. Also, this button is used to  
access special features.  
8. Intercom - Initiates extension-to-extension calling.  
9. Page - Allows you to broadcast a voice message to 1 or all extensions in the system.  
10. Speed Dial Bins - Stores up to 24 telephone numbers. The first 12 are accessible  
with a single button press. Press  
12.  
plus the speed dial button to access the last  
11 - 14. Direct CO Line Access buttons - Allows you to access a specific outsideline.  
15. Speakerphone / Headset - Allows you to communicate with outside lines or other  
extensions hands-free through the speaker. Also, use with the  
button to place  
the telephone in headset mode. When in headset mode, this button is used in place  
of the hook switch.  
16. Program - Allows you to access the program menu. Use the up and down arrows  
(buttons 4 and 5) to navigate the menu.  
17. Erase - Erases individual or all Caller ID data.  
18. Hook Switch - When using the handset (not in headset mode), this switch is used to  
disconnect callers.  
19. Wall Mount Tab - Holds the handset in the cradle when the telephone is mounted on  
a wall.  
20. Speaker - Used for ringing, and speakerphone.  
21. Do Not Disturb - Prevents any incoming calls to be heard. When the indicator light  
is on, the telephone is in Do Not Disturb mode.  
22. Handset Cord Jack (bottom of telephone) - The handset coil cord, or the splitter coil  
cord, plug into this jack.  
23. 2.5mm Headset Jack - This jack is for headsets with a 2.5mm plug.  
24. Flash - Used to access special telephone company service, like Call Waiting.  
25. Conference – 3 party conference - 2 outside lines or one outside line and extension.  
26. Redial - Allows you to easily call back the last number dialed. Also allows automatic  
redial capability.  
27. Mute - Prevents callers from hearing background noises near your telephone.  
28. Hold - Places a call on hold. Calls on hold can be transferred to other extensions.  
29 - 30. Volume - Adjusts the volume of the feature that you are currently using. If the  
telephone is idle, the ringer volume is adjusted.  
31. Line 3 / Line 4 Telephone Jack - 2 Pair (4 conductor) line cord is required when  
plugging into a 2-line RJ14C wall jack.  
32. Line 1 / Line 2 Telephone Jack - 2 Pair (4 conductor) line cord is required when  
plugging into a 2-line RJ14C wall jack.  
33. Data Telephone Jack - Connects to Line 2. Useful for plugging in credit card readers,  
faxes, modems, etc. when Line 2 is connected.  
34. 12VDC, 400mA Adapter (supplied) is required to use this telephone.  
5
35. Dual-level Tilt Legs - Allows you to place the telephone at 2 levels (or wall mount  
Download from Www.Somanuals.com. All Manuals Search And Download.  
level).  
Installation  
What’s Included With Your 4-Line Speakerphone  
(1) Base Telephone  
(1) Handset  
(1) Handset Coil Cord  
(1) 12VDC, 400mA AC Adapter  
(2) 2 Pair (4 Conductor) Line Cords  
(1) 2 Pair (4 Conductor) Short Cord for Wall Mounting  
(1) User Guide  
Site Planning  
This telephone can be connected to 4 separate telephone lines. You  
may connect directly to (2) 2-Line RJ14C telephone jacks. If (4) RJ11C  
jacks will be used, you will need to use 2-line couplers to combine the  
lines into 2 cords: Lines 1 and 2 on one cord, lines 3 and 4 on the  
second cord.  
In order for multiple 4-Line telephones to inter-operate as a system,  
observe these precautions:  
1. Be sure Line 1 is connected throughout the system.  
2. Be sure any other line you wish to appear on a phone is in the  
same position as the other phones. Never cross phone lines (i.e.  
Line 3 on Ext. 11 cannot be Line 2 on a different extension. It must  
be line 3).  
3. Do not connect other devices to Line 1 (fax, modem, etc.).  
4. Do not connect Line 1 to a Digital Subscriber Line (DSL).  
5. The combined total length of cable allowed between all telephones  
in the system cannot exceed 600 feet.  
Select a Location For Your Telephone  
This telephone may be used on a desk or wall mounted. Choose a  
location that meets the following requirements:  
1. Near an AC outlet.  
2. Near the telephone line jack(s).  
3. Away from any electrical machinery or appliances.  
Install the Batteries  
This telephone requires three “AA” size batteries to retain user  
programmed settings in case of power failure. This telephone will not  
operate during a power outage.  
6
Download from Www.Somanuals.com. All Manuals Search And Download.  
1. Open the battery cover on the back of  
the telephone by removing the safety  
screw and pressing the tab in.  
2. Insert the batteries as indicated inside  
the battery compartment.  
3. Reinstall the battery cover and replace  
the safety screw.  
NOTE: When the display reads BATT, replace  
the batteries. When replacing the  
batteries, disconnect the telephone  
lines, but keep the power cord attached.  
Removing power from the telephone  
may result in memory loss.  
Adjust the Viewing Angle  
The telephone has 2 desktop viewing angles and a wall mount position.  
To adjust the angle, remove the brackets from the left and right side of  
the telephone and reposition as shown below.  
Desktop Viewing  
1. Plug lines 1 and 2 into the L1/L2 jack  
on the top of the phone.  
2. Plug lines 3 and 4 into the  
Lines  
1 & 2  
Lines  
3 & 4  
L3/4 jack on the top of the  
phone.  
3. Plug theAC Adapter tip into  
the ADAPTER jack on the  
top of the phone. Plug the  
large end into an AC outlet.  
4. Plug one end of the coil cord into the  
jack on the back of the phone, and  
the other end into the handset.  
Handset  
Coil  
Cord  
7
Download from Www.Somanuals.com. All Manuals Search And Download.  
Wall Mounting  
When wall mounting your telephone, be aware of the following:  
The location where the telephone will be mounted should be away  
from electrical cables, pipes, or other items which may be punctured  
when screws are inserted into the wall  
The wall surface should be capable of supporting the telephone  
weight.  
Use a standard wall phone plate or two screws with anchors.  
AWall Mount Template is provided in the back of this manual for marking  
the screw locations.  
1. Remove the handset from the cradle.  
2. Slide the handset catch (below the hook switch) up to remove it  
from the telephone.  
3. Rotate the handset catch a half turn and slide it back into the slot.  
The handset should now rest on the catch when the telephone is  
upright for wall mounting.  
4. Plug one end of the coil cord into the jack on the back of the phone,  
and the other end into the handset.  
5. Remove the Wall MountingAdapter by pressing in where indicated  
in the illustration below.  
6. Rotate the Wall Mounting Adapter half way and insert it.  
7. Adjust the Viewing Angle Brackets on the left and right side of the  
telephone to allow the phone to rest flat on the wall.  
8. Plug the short telephone cord into the L1/L2 jack on the back of  
the telephone.  
9. Connect the other end of the telephone cord into the jack into the  
wall telephone outlet.  
10. Slip the phone onto the wall mount lining up the wall mounting  
holes over the wall plate posts or screws. Be sure the short  
telephone cord is being inserted into the telephone cord channel  
on the back of the phone.  
11. Slide the telephone down so it is firmly in place.  
12. Place the handset in the cradle.  
13. Plug lines 3 and 4 into the L3/4 jack on the top of the phone.  
14. Plug the AC Adapter tip into the ADAPTER jack on the top of the  
phone. Plug the large end into an AC outlet.  
8
Download from Www.Somanuals.com. All Manuals Search And Download.  
Handset Catch  
Handset  
Jack  
Press to release  
Wall Mount Adapter  
Telephone Cord Channel  
Lines  
1 & 2  
Replace Wall  
Mount Adapter  
Lines  
3 & 4  
Move Viewing Angle  
Brackets on the left  
and right side of the  
telephone as shown.  
9
Download from Www.Somanuals.com. All Manuals Search And Download.  
UsingYourTelephone  
Line Use Indications  
Each Line Button has an indicator to show you the status of the  
telephone line, as shown below:  
No Light  
Blinks once every 2 seconds  
Line is available, if connected  
Line is in use by this phone  
Quickly blinks on and off repeatedly Line is on hold by this phone  
Slowly blinks on and off repeatedly  
Fast Flash  
Line is on hold by another phone  
Line is ringing  
Constantly lit  
Line is in use by another phone  
Handset Operation  
Placing a Telephone Call  
1. Lift the handset.  
NOTE: The first available line will automatically be selected. You may press  
a line button to dial out from a specific line.  
2. Dial the telephone number you wish to call. The number will appear  
on the display window.  
3. After the conversation has finished, place the handset back in the  
cradle to disconnect.  
Answering a Telephone Call (CO Line or Intercom)  
1. When your station rings from an outside line call or an intercom  
call, pick up the handset to answer.  
2. After the conversation has finished, place the handset back in the  
cradle to disconnect.  
Placing an Intercom Call  
1. Lift the handset.  
2. Press the  
button. The display will show ICM, the  
button will light, and you will hear intercom tone in the  
handset.  
3. Dial the extension number you wish to call.  
NOTE: After pressing the button, you may use the first 11 speed  
dial buttons as station select buttons. The buttons are  
preprogrammed as extensions 11 thru 22, from left to right, top to  
bottom.  
4. After the conversation has finished, place the handset back in the  
cradle to disconnect.  
Speakerphone and Headset (when activated) Operation  
10  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Placing a Telephone Call  
1. Press the  
button.  
NOTE: The first available line will automatically be selected. You may press  
a line button to dial out from a specific line. Pressing the line button  
while the telephone is idle will activate the speakerphone.  
2. Dial the telephone number you wish to call. The number will appear  
on the display window.  
3. After the conversation has finished, press the  
disconnect.  
button to  
Answering a Telephone Call (CO Line or Intercom)  
1. When your station rings from an outside line call or an intercom  
call, press the button to answer.  
2. After the conversation has finished, press the  
disconnect.  
button to  
button  
Placing an Intercom Call  
1. Press the  
button. The display will show ICM, the  
will light, and you will hear intercom tone in the handset.  
2. Dial the extension number you wish to call.  
NOTE: After pressing the  
button, you may use the first 11 speed  
dial buttons as station select buttons. The buttons are  
preprogrammed as extensions 11 thru 22, from left to right, top to  
bottom.  
3. After the conversation has finished, press the  
disconnect.  
button to  
Switch from Handset Mode to Speakerphone Mode  
1. While talking on the handset, press the  
button.  
2. When the  
button lights, place the handset in the cradle.  
Switch from Speakerphone Mode to Handset Mode  
While talking on the speakerphone or headset, lift the handset.  
The button light will turn off.  
Switch Between Headset Mode and Handset Mode  
When headset mode is enabled, Speakerphone Mode is disabled.  
Both Handset and Headset are active simultaneously whenever  
Headset Mode is enabled.  
11  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Features and Operation  
Caller ID  
Your 4-Line telephone is equipped with Caller ID for all four outside  
lines. To use the Caller ID feature, you must subscribe to Caller ID  
service for each line through your local telephone service provider.  
You may review, redial, or store in speed dial any of the numbers stored  
in Caller ID.  
Area Codes  
Prior to using the Caller ID feature of the telephone, your home area  
code and any local area codes should be programmed. This will allow  
you to dial local numbers from the Caller ID log.  
All numbers within your Home area code will only dial the 7-digit  
phone number.  
All numbers within your Local area codes will dial the area code +  
7-digit phone number (10-digit dialing).  
All numbers outside these area codes will dial 1 + area code +  
phone number (11-digit dialing).  
NOTE: If you have not set up a Home Area Code or Local Area Codes, all  
phone numbers will be dialed as 11-digits (1 + Area Code + Phone  
Number). If you set up Home Area Code and Local Area Codes  
after Caller ID data has been received, only Caller ID data received  
after setup will reflect the area code changes.  
Home Area Code Setup/Local Area Code Setup  
1. Press the PROGRAM key.  
2. Press the up or down arrow key to scroll to the “Area Code” item.  
3. Press the right arrow to choose this item.  
4. Press the up or down arrow key to select Home (HAC) or Local  
(LAC) area code.  
5. Press the right arrow key to start your setting.  
6. Enter the area code and press the right arrow to confirm your setup.  
12  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Receiving Caller ID on an Idle Telephone  
1. When a call is received on an idle telephone, the display will show  
the name, telephone number, and line that the call is received on.  
2
a. If you answer the call, the Caller ID data will remain on your  
display for the duration of the call.  
b. If the call goes unanswered, or if answered by another  
extension, the display will return to idle after approximately 5  
seconds.  
Receiving Caller ID on a Telephone In Use  
1. When a call is received on an in-use telephone, you must press  
the  
button.  
NOTE: This applies to any telephone where the display is being used (i.e.  
programming speed dial, on a telephone call, setting the calendar,  
etc.)  
2. Press the  
button again to return to your original display.  
Receiving Multiple Calls Simultaneously  
1. The first incoming Caller ID data will be displayed on an idle  
telephone.  
2. If an additional call is received, press the  
through the active ringing Caller ID data.  
button to scroll  
Viewing the Caller ID Database  
1. From an idle telephone, press either the  
or button to  
display the call summary screen. This screen will show the number  
of Caller ID entries in the database, as well as the number of Caller  
ID entries that have not been viewed (New Calls).  
TOTAL:26  
NEW CALLS:01  
2. a. Press the  
button to view the most recent calls to the  
oldest calls in the database.  
b. Press the  
button to view the oldest calls to the most  
recent calls in the database.  
01:19715551234  
MICHAEL SMITH  
13  
Download from Www.Somanuals.com. All Manuals Search And Download.  
3. To view the date and time, press #, or wait approximately 10 seconds.  
01:19715551234  
OCT 08 14:22  
4. The display will return to idle after 20 seconds. Pressing any button  
other than  
and  
will also terminate Caller ID viewing.  
Dial a Telephone Number from the Caller ID Database  
1. Locate the number you wish to call (from Viewing Caller ID Database  
section).  
2. Pick up the handset or press the  
line.  
button to access an outside  
3. Press the  
and then the  
buttons to dial.  
Store the Telephone Number in a Speed Dial Location  
There are 24 memory locations (2 groups) to store Speed Dial numbers.  
Each memory location can store up to 24 digits, including PAUSE,  
FLASH, and TONE.  
1. Press the PROGRAM key.  
2. Press the up or down arrow key to scroll to the “Speed Dial” item.  
3. Press the right arrow key to choose this item. You can also press  
the speed dial key directly to view the speed dial number.  
4. Press the up or down arrow key to confirm your selection and edit  
the speed dial number.  
NOTE: To access the second group of speed dial locations press SHIFT +  
any speed dial key that you desire. The second set of speed dial  
numbers are from location 13 to location 24.  
Erasing a Caller’s Information from the Caller ID Database  
NOTE: Erasing Caller ID information cannot be undone.  
1. Locate the number you wish to erase (from Viewing Caller ID  
Database section).  
2. Press  
You will be asked to confirm the deletion.  
01:19715551234  
<ERASE>: confirm  
3. Press  
to confirm deletion.  
01: Deleted  
14  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Erasing All Caller ID Information from the Caller ID Database  
NOTE: Caller ID information is stored at each phone independently.  
1. Press either the  
screen.  
or  
button to display the call summary  
TOTAL:26  
NEW CALLS:01  
2. Press  
3. Press  
. You will be asked to confirm the deletion.  
TOTAL:26  
<ERASE>: confirm  
to confirm deletion.  
All Deleted  
Conference  
You can conference 3 parties in one of two ways:  
Two outside lines and your extension  
One outside line and one additional extension  
You may also use privacy release to conference one outside line with  
more than one additional extension. See Privacy Release for more  
details.  
1. While on an outside line call, press the  
caller on hold.  
button to place this  
2. Make the second call by pressing an available line button (or the  
button for an additional extension) and dialing the telephone  
number (or extension).  
3. When the third party answers, press the  
the conference.  
button to establish  
Data Jack  
The data jack on the back of the telephone allows you to connect a fax or  
modem. The data jack is a spare jack that is connected directly to Line  
2. If line 2 is not present, the data jack is not usable.  
15  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Date and Time  
Date Programming  
1. Press the PROGRAM key.  
2. Press the up or down arrow key to scroll to the “Date” item.  
3. Press the right arrow key to choose this item.  
4. Press the up or down arrow key to select the month.  
5. Press the right arrow key to confirm your selection.  
6. Press the up or down arrow key to select the day.  
7. Press the right arrow key to confirm your selection.  
8. Press the up or down arrow key to select the week.  
9. Press the right arrow key to confirm your selection.  
Time Programming  
1. Press the PROGRAM key.  
2. Press the up or down arrow key to scroll to the “Time” item.  
3. Press the right arrow key to select this item.  
4. Press the up or down arrow key to select the hour.  
5. Press the right arrow key to confirm your selection.  
6. Press the up or down arrow key to select the minute.  
7. Press the right arrow key to confirm your selection.  
Dial Pad Disable  
The touch tone dial pad can be disabled to restrict outside calling. When  
the dial pad is disabled, no numbers can be dialed, including speed dial  
numbers.  
1. Press the PROGRAM key.  
2. Press the up or down arrow key to scroll to the “Dial Pad” item.  
3. Press the right arrow key to select this item.  
4. Press the up or down arrow key to turn the dial pad On or Off.  
5. Press the right arrow key to confirm your selection.  
Do Not Disturb (DND)  
The Do Not Disturb function may be used to avoid any telephone  
interruptions. When activated, your telephone will not ring for any calls.  
Press the  
active, the  
button to toggle DND on and off. When DND is  
button will be lit.  
16  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Extension Numbers  
When using multiple phones, each phone must be set as a unique  
extension number. The phones are factory set as Extension 11, and  
can be programmed from 11 to 22.  
1. Press the PROGRAM key.  
2. Press the up or down arrow key to scroll to the “Extension NO” item.  
3. Press the right arrow key to select this item.  
4. Press the up or down arrow key to select an Extension ID.  
5. Press the right arrow key to confirm your selection.  
Flash  
You may use the  
button to access custom calling features  
provided by your telephone company, such as call waiting, 3-way calling,  
etc.  
While on an outside call, press the  
button to invoke call  
waiting or other special telephone company services. Contact your local  
telephone company for instructions on the use of special services.  
Flash Time Programming  
This feature allows you to program different flash times.  
1. Press the PROGRAM key.  
2. Press the up or down arrow key to scroll to the “Flash Time” item.  
3. Press the right arrow key to select this item.  
4. Press the up or down arrow key to select a time value.  
5. Press the right arrow key to confirm your selection.  
Headset Mode  
A headset may be used with your 4-line telephone to allow you to use  
your phone hands-free. When the phone is in Headset Mode, the  
Speakerphone and the hook-switch inside the handset cradle are disabled.  
The  
button is used to toggle between off-hook and on-hook. The  
handset is still usable, but only by using the  
button.  
Headset Enable / Disable  
Press  
to toggle headset mode. When the x button  
light flashes, headset mode is enabled, and the speakerphone is  
enabled.  
17  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Operation  
Use the  
button to pick up and hang up. This is true for  
headset and handset operation when in headset mode.  
Pressing Speed Dial buttons or Line buttons will cause the telephone  
to go off hook. Use the  
button to hang up.  
NOTE: It is important to remember that the hook switch is inoperative when  
in headset mode. If you use the handset and then hang up the  
handset, the phone will not disconnect from the telephone line. You  
must use the  
button.  
Hold  
Holding a Call  
While on a conversation, press the  
button to place the call  
on hold. The line button corresponding to the call on hold will blink  
on and off repeatedly.  
A Reminder Tone will be heard every 30 seconds while the call is  
on hold. This can be disabled. See Hold Reminder.  
Retrieving a Held Call  
To retrieve a held call, press the line button where the call is held.  
When a call is on hold, the line button will blink on and off repeatedly.  
Hold Reminder  
This feature allows you to program the hold reminder time to remind you  
that a CO line is still on hold.  
1. Press the PROGRAM key.  
2. Press the up or down arrow key to scroll to the “Hold Remind” item.  
3. Press the right arrow key to select this item.  
4. Press the up or down arrow key to select a time value.  
5. Press the right arrow key to confirm your selection.  
Intercom  
The 4-line telephones allow extension-to-extension calling without using  
telephone lines.  
Predefined Station Select Buttons  
After pressing the  
button, the Speed Dial buttons become Station  
Select buttons, allowing you to press one of the Speed Dial buttons to  
contact another extension.  
The Station Select buttons are predefined as 11 thru 22 (left to right,  
top to bottom). To use these buttons, press the  
button followed  
by the Station Select button of the extension you wish to call.  
18  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Placing an Intercom Call  
1. a. If using the handset, pick up the handset and press
b. If using speakerphone or a headset, press  
.
2. Dial the extension number you wish to call, or press a Station Select  
button.  
3. After the conversation has finished, hang up or press the  
button to disconnect.  
NOTE: If the called party disconnects first, both phones are disconnected.  
Pressing the  
been ended may cause your station to access an outside line.  
Press the button again to disconnect from the outside line.  
button to end an intercom call that has already  
Answering an Intercom Call  
1. When your station receives an Intercom Call, your display will show  
which extension is calling and you will hear a distinctive double-  
ring.  
2. a. Pick up the handset to answer the Intercom Call in handset  
mode.  
b. Press the  
button to answer the Intercom Call in  
speakerphone or headset mode.  
3. After the conversation has finished, hang up or press the  
button to disconnect.  
NOTE: If the calling party disconnects first, both phones are disconnected.  
Pressing the  
been ended may cause your station to access an outside line.  
Press the button again to disconnect from the outside line.  
button to end an intercom call that has already  
NOTE: When your phone is in Do Not Disturb mode, your phone will not ring  
for Intercom Calls. You may, however, still answer intercom calls.  
Line Connection  
Each 4-line telephone comes default with all four lines enabled. Because  
the phone has Line In Use detection, lines that are not connected will  
be lit constantly. Turning off line connections for inactive lines will turn  
the Line In Use light off, and disable access to the line.  
Deactivate Line Connection/Activate Line Connection  
1. Press the PROGRAM key.  
2. Press the up or down arrow key to scroll to the “Line Connection”  
item.  
3. Press the right arrow key to select this item.  
4. Press the up or down arrow key to select a line.  
5. Press the right arrow key to confirm your selection.  
6. Press the up or down arrow key to turn the line connection On or Off.  
7. Press the right arrow key to confirm your selection.  
19  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Line Status Indication  
Each line has a light to show its status:  
No Light  
Blinks once every 2 seconds  
Line is available, if connected  
Line is in use by this phone  
Quickly blinks on and off repeatedly Line is on hold by this phone  
Slowly blinks on and off repeatedly  
Fast Flash  
Line is on hold by another phone  
Line is currently ringing  
Constantly lit  
Line is in use by another phone  
The phone also has Line In Use indication for non-system telephones  
(fax, modem, etc.). When another device is using a phone line, the  
light on the line will be constantly lit, and you may press the line button  
to monitor the line.  
Mute  
The mute function turns off the telephone microphone (for the  
speakerphone, handset, or headset) so the other party cannot hear  
you. This is useful to block out background noise.  
To toggle Mute on and off, press the  
is muted, the button will be lit.  
Message Waiting / New Call Indication  
button. While the phone  
If you subscribe to Caller ID from your local telephone company, the  
MSG/CALLS light will light solid when a call is received, until it is  
reviewed from the Caller ID database. Message Waiting will show on the  
LCD with line #.  
If you subscribe to Voice Mail from your local telephone company, the  
MSG/CALLS light will blink when a call is received and a voice mail  
message is left. This telephone is compatible with FSK type voice mail  
signaling. Check with your local telephone company for details.  
Manually Turn Off Message Waiting Indicator (MWI)  
If your Voice Mail light does not turn off when all of your voice mail  
messages have been erased, you may manually turn off the light. When  
a new message is received, the light will begin to flash again.  
1. While your phone is idle, press  
2. Press again to confirm. Aconfirmation ring will be heard upon  
successfully turning off the MWI light.  
.
Paging  
Paging allows you to dial an extension (or all extensions) and broadcast  
a message without the receiving extension(s) answering.  
20  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Paging an Individual Extension  
1. a. If using the handset, pick up the handset and press  
b. If using speakerphone or a headset, press  
.
2. Dial the extension number you wish to page.  
3. Speak your message. After you have finished, hang up or press the  
button to disconnect.  
Answering a Page to an Individual Extension  
1. If you receive a page, and wish to speak to the calling party, pick up  
the handset or press the  
button.  
2. After the conversation has finished, hang up or press the  
button to disconnect.  
Page All Extensions  
1. Press the PAGE key.  
2. Press the * key.  
NOTE: In order to avoid audible feedback, it is highly recommended to  
speak using the handset or a headset when paging all extensions.  
Answering an All Page (Meet Me Page)  
1. a. If using the handset, pick up the handset and press  
.
b. If using speakerphone or a headset, press  
.
NOTE: You will be connected only to the party who initiated the Page All.  
2. After the conversation has finished, hang up or press the  
button to disconnect.  
Pause  
You may use the Pause function to insert a 3-second delay in a speed  
dial sequence. This is most commonly used in banking, voice mail, and  
long distance services.  
The  
button becomes the pause button when on an outside line,  
or when programming a speed dial location.  
Pause Time Programming  
This feature allows you to program different pause times to make a delay  
between digits during a call.  
1. Press the PROGRAM key.  
2. Press the up or down arrow key to scroll to the “Pause Time” item.  
3. Press the right arrow key to select this item.  
4. Press the up or down arrow key to select a time value.  
5. Press the right arrow key to confirm your selection.  
21  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Prime Line Programming  
This feature allows you to program which line will be selected first when  
you lift the handset or press the speaker key.  
1. Press the PROGRAM key.  
2. Press the up or down arrow key to scroll to the “Prime Line” item.  
3. Press the right arrow key to select this item.  
4. Press the up or down arrow key to select a line.  
5. Press the right arrow key to confirm your selection.  
Privacy / Privacy Release  
Privacy prevents other 4-line telephones from intruding on a outside line  
conversation with another 4-line telephone. Privacy can be released on  
a per-call basis or for all calls.  
Per Call Privacy Release  
While on an outside call, press the line button corresponding to the  
line you are using to release privacy. You will hear a single ring to  
confirm the line is no longer private. When you hang up, privacy will  
be restored to the line for the next call.  
Press the line button again to enable privacy. You will hear a double  
ring to confirm privacy has been restored.  
Disable Line Privacy for this Station/Enable Line Privacy for this  
Station  
1. Press the PROGRAM key.  
2. Press the up or down arrow key to scroll to the “Privacy Release”  
item.  
3. Press the right arrow key to select this item.  
4. Press the up or down arrow key to turn the privacy release On or Off.  
5. Press the right arrow key to confirm your selection.  
Redial  
Redial (one time only)  
Redial allows you to call the last phone number dialed.  
From an idle telephone, press  
. The first available line will  
be used to dial the last number dialed. You may pick up the handset  
or proceed in speakerphone mode.  
Auto Redial  
You may also use auto redial to repeatedly dial the last phone number  
dialed, up to 10 times, as shown below.  
1. Dial the number you wish to auto redial.  
2. Hang up.  
22  
Download from Www.Somanuals.com. All Manuals Search And Download.  
3. Press a line button to dial out on.  
4. Press . The system will redial the last number dialed, and  
wait 30 seconds.  
NOTE: If the called party answers, you may pick up the handset, or press  
the  
button to stop the auto redial.  
5. If the you do not pick up the handset or press the  
button, the  
telephone will hang up, wait 60 seconds, and dial again. This process  
will repeat for up to 10 times.  
NOTE: You may stop the process any time by pressing the  
button.  
Ring Type Programming  
This feature allows you to select one of the four ringer types for each of  
the four lines.  
1. Press the PROGRAM key.  
2. Press the up or down arrow key to scroll to the “Ring Type” item.  
3. Press the right arrow key to select this item.  
4. Press the up or down arrow key to select a line.  
5. Press the right arrow key to confirm your selection.  
6. Press the up or down arrow key to select a ring type.  
7. Press the right arrow key to confirm your selection.  
Reset the Phone  
This feature allows you to clear all the programmed data and all parameters  
back to the default values.  
1. Press the PROGRAM key.  
2. Press the up or down arrow key to scroll to the “Reset All” item.  
3. Press the right arrow key to select this item.  
4. Press the right arrow key again within 3 seconds to confirm your  
selection.  
The default values are as follows:  
1. Extension NO: 11  
2. Line Connection: On for all lines  
3. Line Ring On/Off: On  
4. Tone/Pulse Mode: Tone  
5. Dial Pad On/Off: On  
6. Hold Reminder Time: 30 seconds  
7. Privacy Release On/Off: On  
8. Flash Length: 600 milliseconds  
9. Ring Type: Type 1 for all lines  
10. Prime Line: Line 1  
11. Pause Time: 3 seconds  
12. Date/Time: Jan 01 Fri 12:00 AM  
23  
Download from Www.Somanuals.com. All Manuals Search And Download.  
13. Area Code: Empty for H.A.C. and all L.A.C.  
14. Speed Dial: Empty for all locations  
15. Ring Volume: Middle  
16. Speaker Volume: Level 4  
17. Handset Volume: Minimum  
18. Headset Volume: Minimum  
Ringer Enable / Disable  
You may enable or disable any individual line or lines on the 4-line  
telephone.  
Ringer Disable/Ringer Enable  
1. Press the PROGRAM key.  
2. Press the up or down arrow key to scroll to the “Line Ring” item.  
3. Press the right arrow key to select this item.  
4. Press the up or down arrow key to select a line.  
5. Press the right arrow key to confirm your selection.  
6. Press the up or down arrow key to turn the line ringer On or Off.  
7. Press the right arrow key to confirm your selection.  
Speed Dial  
There are a total of 24 speed dial locations on the telephone. The  
speed dial buttons are in 2 groups: 12 direct dial buttons, and 12 shifted  
direct dial buttons that can be accessed using the  
by one of the 12 direct dial buttons.  
button followed  
Each speed dial location can store up to 24 digits, including Pause and  
Flash.  
Dialing from a Speed Dial Location  
To call a number in one of the first group of 12 speed dial locations,  
press the speed desired speed dial button from an idle telephone,  
or by first pressing an outside line button.  
To call a number in one of the second group of 12 speed dial  
locations, press the  
button followed by the desired speed  
dial button from an idle telephone, or by first pressing an outside  
line button.  
Pulse to Tone Switching  
*
If you have pulse dialing service, you may need to access calling services  
such as banking and voice mail using tone dialing. You may temporarily  
switch from pulse dialing to tone dialing during a call in order to access  
these features. The system is reset to pulse dialing after you hang up.  
24  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Press * any time during your call to change to tone dialing mode. The  
telephone is returned to pulse mode when you disconnect.  
Tone/Pulse Mode  
Depending on the phone service available in your area, you may need to  
adjust the dialing mode.  
NOTE: All 4 lines will be set to the same dialing mode.  
Pulse Mode/Tone Mode  
1. Press the PROGRAM key.  
2. Press the up or down arrow key to scroll to the “Tone/Pulse” item.  
3. Press the right arrow key to select this item.  
4. Press the up or down arrow key to select Tone or Pulse dialing.  
5. Press the right arrow key to confirm your selection.  
Transfer  
You may transfer an outside line to any extension on the system.  
1. While on a outside line conversation, press  
.
2. Dial the extension you wish to transfer to, or press the desired Station  
Select button (see Intercom - Predefined Station Select Buttons).  
NOTE: If the call is transferred successfully, a single confirmation ring will  
be heard. If the transfer is unsuccessful, a double ring will beeard,  
and the call will be placed on hold.  
Volume  
Handset / Headset Volume  
While on a conversation using the handset or headset, press the  
or  
buttons to adjust the volume.  
Ringer Volume  
While your telephone is idle, press the  
or  
buttons to  
or  
adjust the ringer volume.  
Speakerphone Volume  
While on a speakerphone conversation, press the  
buttons to adjust the speakerphone volume.  
25  
Download from Www.Somanuals.com. All Manuals Search And Download.  
IMPORTANT SAFETYINSTRUCTIONS  
Alwaysfollowbasicsafetyprecautionswhenusingyourtelephoneequipmenttoreducetherisk  
of fire, electrical shock, and injury.  
1.  
2.  
3.  
Read and understand all instructions in the Owner’s Instruction Manual.  
Read all warnings and follow all instructions marked on the product.  
Unplug this product from the wall outlet before cleaning. Use a damp cloth for cleaning. Do not use liquid or aerosol  
cleaners.  
4.  
Do not use the telephone near water. For example, do not use near a bathtub, wash bowl, kitchen sink, laundry tub,  
swimming pool, or in a wet basement.  
5.  
6.  
Do not place this product on an unstable cart or stand. The product may fall causing serious damage to the product.  
Use only the type power source indicated on the label. If you are not sure of the type power supply to your home,  
consult your dealer or local power company.  
7.  
8.  
Do not place any objects on the telephone line cord. Do not locate the telephone where the line cord will be walked  
on.  
Do not block or cover ventilation slots and openings in the bottom of the telephone. The openings should never  
beblockedbyplacingthetelephoneonabed,sofa,rug,orothersimilarsurfaces.Thistelephoneshouldneverbeplaced  
near or over a radiator or heat register. This telephone should never be placed in a built-in installation unless proper  
ventilation is provided.  
9.  
Never spill liquid on the telephone or push objects of any kind through ventilation slots. Liquid or objects may  
touch dangerous voltage points or short out parts that could result in a risk of fire or electrical shock.  
Do not disassemble this product. Opening or removing covers may expose you to dangerous voltages or other risks.  
Incorrect reassembly can cause electrical shock when the product is subsequently used.  
Do not overload outlets and extension cords. Some telephones require AC power from an outlet, overloading the  
outlets can result in the risk of fire or electric shock.  
10.  
11.  
12.  
13.  
14.  
Avoid using a telephone during a local thunderstorm. There may be a remote risk of electrical shock from lightning.  
Do not use a telephone in the vicinity of a gas leak to report the leak, or otherwise.  
Unplug the telephone from the wall outlet and refer servicing to qualified service personnel under the following  
conditions:  
When the line cord is frayed or plugs damaged.  
If liquid has been spilled into the telephone.  
If the telephone has been exposed to rain or water.  
If the telephone does not operate properly by following the operating instructions. (Adjust only those controls  
covered by the operating instructions. Improper adjustment of other controls may result in damage and will often  
require extensive work by a qualified technician to restore the product to normal operation.)  
If the telephone has been dropped or the housing damaged.  
If the telephone exhibits a distinct change in performance.  
The following additional precautions should be observed for battery usage  
1.  
Use only the type and size of batteries specified in the users manual.  
2.  
Do not dispose of the batteries in a fire. The cells may explode. Check with local codes for possible special disposal  
instructions.  
3.  
4.  
Do not open or mutilate the batteries. Released electrolyte is corrosive and may cause damage to the eyes or skin.  
It may be toxic if swallowed.  
Exercisecareinhandlingbatteriesinordernottoshortthebatterywithconductingmaterialssuchasrings,bracelets  
andkeys. Thebatteryorconductormayoverheatandcauseburns.  
5.  
6.  
7.  
8.  
9.  
Do not attempt to recharge the batteries that are with or identified for use with this product. The batteries may  
leak corrosive electrolyte or explode.  
Do not attempt to rejuvenate the batteries provided with or identified for use with this product by heating them.  
Sudden release of the battery electrolyte may occur causing burns or irritation to eyes or skin.  
Whenreplacingbatteries, allbatteriesshouldbereplacedatthesametime. Mixingfreshanddischargedbatteries  
could increase internal cell pressure and rupture the discharged batteries.  
When inserting the batteries into this product, the proper polarity or direction must be observed. Reverse  
insertion of batteries can cause charging, which may result in leakage or explosion.  
Remove the batteries from this product if the product will not be used for an extended period of time (several  
moths or more) since during this time, the batteries could leak, damaging the product.  
Discard dead batteries as soon as possible since they are more likely to leak in a product.  
Do not store this product, or the batteries provided with or identified for use with this product, in high  
temperature areas.  
10.  
11.  
SAVE THESE INSTRUCTIONS  
26  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Repair Of Your Telephone  
DO NOT ATTEMPT TO REPAIR THIS PRODUCT YOURSELF. 4-Line Telephones  
manufactured by CORTELCO must be returned to us for repair.  
You can return your telephone to CORTELCO for repair or replacement in accordance  
with our LIMITED WARRANTY.  
DATE-OF-PURCHASE: CORTELCO warrants THIS PRODUCT against defects in  
material and workmanship in accordance with our LIMITED WARRANTY. If your telephone  
is returned for repair, include a copy of your sales receipt containing the date-of-purchase.  
DO NOT INCLUDE THE ORIGINAL SALES RECEIPT.  
If date-of-purchase is not included, the factory date encoded on the label on the bottom  
of your telephone will be used as the date-of-purchase. The factory date allows six  
months for distribution and sale of this product.  
If you return your telephone for repair, the warranty period is not extended. The  
original date-of-purchase continues to apply to your warranty.  
OUT-OF-WARRANTY REPAIR We will repair this product for a nominal fee after the  
LIMITED WARRANTY has expired if you send it to us in a complete and undamaged  
condition. The repaired 4-line telephone will be shipped to you C.O.D., freight collect.  
RETURN-FOR-REPAIR PACKAGING If you are returning a unit to us for repair, package  
it carefully, preferably in the original carton. Be sure to include your return address, a  
copy of the sales receipt showing date-of-purchase, and a note describing the problem  
you have with your telephone. Shipping must be prepaid. If the telephone is in warranty,  
it will be repaired or replaced, at our option, at no cost to you, and it will be returned  
shipping prepaid.  
Ship your 4-line telephone (shipping prepaid) to:  
CORTELCO  
REPAIR CENTER  
1703 SAWYER ROAD  
CORINTH, MS 38834  
27  
Download from Www.Somanuals.com. All Manuals Search And Download.  
The FCC WantsYou To Know  
This telephone is registered with the Federal Communications Commission and it complies with Part 15J  
and Part 68 of the FCC Rules and Regulations. Modifying or tampering with the telephone’s internal  
components can cause a malfunction and might invalidate the telephone’s warranty and void your FCC  
authorization to operate it.  
The FCC requires us to provide you with the following information:  
1.  
The FCC requires that you connect to a nationwide telephone network through a modular telephone  
outlet that is Part 68 compliant. This telephone cannot be used with coin service provided by the  
telephone company. Connection to party lines is subject to state tariffs. Check with your local  
telephone company.  
2.  
FCC rules require that, upon request, you provide the following information to the telephone company:  
A.  
B.  
The line (telephone number) to which you will connect the telephone equipment.  
The FCC Registration Number and Ringer Equivalence Number (REN). These numbers can  
be found on a label on the bottom of your telephone equipment.  
The Ringer Equivalence Number (REN), which is used to determine the number of devices you  
may connect to your phone line, indicates the amount of power that your telephone draws from  
the telephone company line during ringing. If you have more than one telephone (or other  
terminal device) connected to the telephone company line, you should total the RENs and be  
sure that the total is not more than five. Your telephones may not ring if the total is more than  
five. Also, in some rural locations, your telephone may not ring if the REN total is more than  
three.  
3.  
4.  
If it is determined that your telephone equipment is malfunctioning, the FCC requires that it not be  
used and be unplugged from the modular outlet until the problem has been corrected. Repairs to  
this telephone equipment can be made only by the manufacturer or its authorized agents, or by  
others who may be authorized by the FCC. Unauthorized repairs void registration and warranty.  
The telephone company may discontinue service if the telephone is determined to cause harm to the  
telephone network. In this case, the telephone company will:  
A.  
B.  
C.  
If possible, notify the customer in advance that the service is being discontinued.  
Provide the customer with the opportunity to correct the situation.  
Inform the customer of their right to file a complaint with the FCC.  
Your local telephone company may make changes in its facilities, equipment, operations, or procedures  
that could affect the proper functioning of your equipment. If they do, you will be notified in advance  
to give you an opportunity to maintain uninterrupted telephone service.  
5.  
6.  
This telephone is Hearing Aid Compatible.  
When programming or testing emergency numbers, or making test calls to emergency numbers:  
A.  
B.  
Remain on the line and briefly explain to the dispatcher the reason for the call before hanging  
up.  
Perform such activities in the off-peak hours, such as early morning or late evening.  
Part 15 of FCC Rules  
This equipment generates, uses, and can radiate low-level radio frequency energy. It has been tested and  
found to comply with the limits for a Class B digital device in accordance with the specifications in Part 15J  
of the FCC Rules, which are designed to provide reasonable protection against such interference in a  
residential installation. If the equipment does cause interference to radio or television reception (which  
can be determined by unplugging it from the telephone line and the electrical outlet), the user is encouraged  
to try to correct the interference by one or more of the following measures:  
Where it can be done safely, reorient the radio or TV receiving antenna.  
Where possible, relocate the television, radio, or other receiver with respect to the telephone  
equipment.  
Plug the telephone AC Adapter into an outlet on a different circuit than used by the radio or  
television.  
Consult a dealer or an experienced radio/television technician for additional suggestions.  
28  
Download from Www.Somanuals.com. All Manuals Search And Download.  
PLACE THIS TEMPLATE ON THE WALL.  
THE LOCATION OF THE SCREWS IS INDICATED  
BY THE CENTERS OF THE CROSSED LINES.  
FASTEN THE SCREWS WITH ANCHORS,  
LEAVING 3/16” OF THE SCREW  
EXTENDING FROM THE WALL.  
29  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Limited Warranty  
If this product was purchased by you new in the U.S. or Puerto Rico, CORTELCO  
warrants it against defects in material and workmanship for a period of one (1)  
year from the date of original purchase. This warranty is in lieu of all other  
express warranties. During the warranty period, CORTELCO agrees to repair  
or, at its option, replace the defective product, or any part of it without charge  
for parts or labor. This is your exclusive remedy. This warranty does not cover  
damage resulting from accident, misuse, abuse, improper installation or operation,  
lack of reasonable care, the affixing of any attachment not provided by  
CORTELCO with the product and loss of parts. The warranty is voided in the  
event any unauthorized person alters or repairs the unit.  
Telephone companies use different types of equipment and offer various types  
of services to customers. CORTELCO does not warrant that this product  
is compatible with the type of equipment of any particular phone  
company or the services provided by it.  
CORTELCODISCLAIMSANYIMPLIEDWARRANTY,INCLUDINGTHEWARRANTY  
OFMERCHANTABILITYANDTHEWARRANTYOFFITNESSFORAPARTICULAR  
PURPOSE,ASOFTHEDATEONEYEARFROMTHEORIGINALPURCHASEOF  
THEPRODUCT.CORTELCOASSUMESNORESPONSIBILITYFORANYSPECIAL,  
INCIDENTALORCONSEQUENTIALDAMAGES.  
THISWARRANTYGIVESYOUSPECIFICLEGALRIGHTS,ANDYOUMAYHAVE  
OTHERRIGHTSWHICHVARYFROMSTATETOSTATE. SOMESTATESDONOT  
ALLOW THE EXCLUSION OR LIMITATION OF SPECIAL, INCIDENTAL OR  
CONSEQUENTIALDAMAGES OR LIMITATIONS ON HOW LONGAN IMPLIED  
WARRANTYLASTS, SOTHEABOVE EXCLUSIONAND LIMITATION MAYNOT  
APPLYTO YOU.  
If failure occurs and your 4-Line Telephone is in warranty, service shall be  
provided by returning it, shipping prepaid, to:  
CORTELCO - Repair Center  
1703 Sawyer Road  
Corinth, Mississippi 38834  
The product will be repaired or replaced if examination by us determines the  
product to be defective. Telephones received damaged as a result of shipping  
will require you to file a claim with the carrier.  
412541-TP1-25S  
User Guide  
Rev.2.0  
Download from Www.Somanuals.com. All Manuals Search And Download.  

Cobra Electronics Marine Radio MR F300BT User Manual
Coda Laminator Cold Mount Laminator User Manual
Coleman Tent 2000001587 User Manual
Cooper Lighting Indoor Furnishings CCH0070109 00 JCHE P65 User Manual
Cooper Lighting Landscape Lighting OVH50SR22D4 User Manual
Crate Amplifiers Stereo Amplifier KX 80 User Manual
Dimplex Heat Pump LIK 8MER User Manual
Fisher Price Musical Toy Instrument J9632 User Manual
Frigidaire Oven 318205300 User Manual
GE Monogram Refrigerator ZIDI240 User Manual