Corega Network Card WLCBGMO User Manual

WLCBGMO  
MISOWireless Cardbus Adapter  
User Manual  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Contents  
WLCBGMO Manual  
1. Preface.............................................................................................................2  
2. Software Installation....................................................................................4  
3. Setting TCP/IP..................................................................................................9  
4. Setting Wireless Network.........................................................................10  
5.NetworkSecuritySetting...........................................................................12  
WPA-PSK and WPA2-PSK...........................14  
6. Utility Introduction....................................................................................17  
7. FAQ................................................................................................................ 24  
8. Specification............................................................................................... 27  
Download from Www.Somanuals.com. All Manuals Search And Download.  
1
Preface  
1
corega CG-WLCBGMO MISO Wireless Cardbus Adapter, com-  
pliance with IEEE802.11b/g standards. Its internal MIMO XR  
technology can improve transmit frequency and increase signal  
coverage area six times farther then general 802.11g standard  
products. Moreover, it supports TX-Burst technology, and can  
effectivly improve transmit speed. It also spends less power from  
laptop. In sum, these outstanding features make CG-WLCBGMO  
a great companion for no Centrino laptop users.  
1.1 Features  
• Compliance with IEEE802.11b/g standard.  
• Internal MIMO XR technology, improve the wire-  
less coverage area up to 375M. Its coverage area ra-  
dius is six times farther then general 802.11g standard  
products.(Environmental factors may adversely affect  
wireless signal range).  
• Internal 2 antennas, support TX-Burst technology, effectivly  
improve transmit speed.  
• Supports WEP(64/128 bits),WPA,WPA2, and 802.1 network  
security modes.  
• Supports roaming function, can automatically search for  
stronger signal wireless AP.  
• Laptop friendly cardbus design  
• Supports power save mode, spending less power.  
1.2 Package Content  
Before installation, please make sure the packing content is  
completed. If there is something loss please contact your local  
distributor.  
- MISO Wireless Cardbus Adapter  
- CD-ROM  
Download from Www.Somanuals.com. All Manuals Search And Download.  
2
 
WLCBGMO Manual  
- User Manual  
1.3 Hardware description  
1. Link LED  
ON: network connected.  
OFF: network disconnected.  
2. Act LED  
Indicates the connection status  
Blink: transmitting or receiving  
data  
OFF: not transmitting or receiving  
data  
1.4 Installation Steps  
Please confirm the following steps before installing the product.  
Plug the product into the Cardbus slot Put the Driver CD   
Install the utility program and the driver Confirm the Device  
status of the product Set up TCP/IP Open the Utility  
Program Setup the Wireless Network Enable the security  
function Setup the advanced functions Start to use the  
product.  
Download from Www.Somanuals.com. All Manuals Search And Download.  
3
 
Software Installation  
2
2.1 Hardware Installation  
Please plug corega WLCBGMO into the Cardbus slot of the lap-  
top. After you plug it in, please install the software and driver.  
When the following pages appear, please click [cancel].  
<Windows XP>  
<Windows 2000>  
Download from Www.Somanuals.com. All Manuals Search And Download.  
4
 
WLCBGMO Manual  
2.2 Utility and Driver Installation  
1. Put Driver CD into the CD-ROM drive.  
2. Please select [English]  
3. Click [Install Software]  
Download from Www.Somanuals.com. All Manuals Search And Download.  
5
WLCBGMO Manual  
4.The [corega Wireless Adapter Setup] page.  
5. Click [Continue Anyway].  
Download from Www.Somanuals.com. All Manuals Search And Download.  
6
WLCBGMO Manual  
6. Click [Finish] to finish setup.  
2.3 Verify the Hardware Status  
1. Open [Control Panel]=>Double-click [System].  
2. Select [Hardware] tab=>Click [Device Manager].  
Download from Www.Somanuals.com. All Manuals Search And Download.  
7
 
WLCBGMO Manual  
3. Select and double-click [CG-WLCBGMO].  
4.Verify the device status of CG-WLCBGMO is [This device is  
working properly]->Click [OK] to close this page.  
Download from Www.Somanuals.com. All Manuals Search And Download.  
8
SettingTCP/IP  
WLCBGMO Manual  
3
1. Enter [Start Menu]=>select [Control panel]=>select [Network].  
2. Right-click [Local Area Connections] icon=>select [proper-  
ties]。  
3. Select [Internet Protocol(TCP/IP)]=>Click [Properties].  
4. Select the [General] tab.  
a. If your Wireless Router has [DHCP] function, please select  
both [Obtain an IP address automatically] and [Obtain DNS  
server address automatically].  
b. If the router does not support [DHCP] function, you have to  
configure the IP and DNS settings.  
Download from Www.Somanuals.com. All Manuals Search And Download.  
9
SettingWireless Network  
4
User can use corega Wireless Utility to configure wireless net-  
work. After finishing configuration, please check if the connec-  
tion works.  
Please confirm that user’s computer is in the wireless radio wave  
range. If the computer is out of the radio range, the setup will  
not be seccessful.  
After user installed CG-WLCBGMO and corega Wireless Utility,  
CG-WLCBGMO will automatically link with the AP/Router. If the  
connection is successful, the following message will appear .  
1. Click the  
icon in the system tray to open the Utility. If there  
is no such icon, enter [Start]->click[Program]->select[CG-  
WLCBGMO]->click[corega Wireless Utility] and the icon will  
appear.  
2.The availibale APs are displayed in the [Site Survey] tab. If there  
is no AP in dialog box, please press [Rescan] .  
Download from Www.Somanuals.com. All Manuals Search And Download.  
10  
WLCBGMO Manual  
3.To make connection, select one AP/SSID (eg:corega) and  
click [Conncet]. When the connection works, [Connected]  
will appear in the left button of this tab and the icon  
appears in front of the linked AP. When the connection  
failed,[Disconnected] will appear.  
If the AP has set up the encryption, please setup the the same  
keys on CG-WLCBGMO (refer to chapter 5) before you click  
[OK].  
Download from Www.Somanuals.com. All Manuals Search And Download.  
11  
Network Security Setting  
5
If your AP/Router have setted network security function, your  
cardbus needs to have the same security setting.The details  
of network security setting are described below. Please open  
corega Wireless Utility before you start to setup network secu-  
rity:  
Double click the  
icon in the system tray to open the Utility  
page. If there is no wireless icon, please click [start Menu]->se-  
lect [Programs]->click [CG-WLCBGMO]->click [corega Wireless  
Utility], and the wireless icon will appear.  
5.1 Setting WEP  
1. If your AP has [WEP] authentication(eg:corega ), press [Con-  
nect].  
Download from Www.Somanuals.com. All Manuals Search And Download.  
12  
 
WLCBGMO Manual  
2. Please follow the instructions:  
a. [Authentication Type]: indicates the authentication type of  
the AP/Router. Please confirm the setting of the AP/Router.  
[Open]:WEP open system is based on request and grant. It is  
essentially no authentication.  
[Shared]:WEP shared key is based on request, challenge, challenge  
response, grant/deny.  
b. Select [WEP] in [Encryption].  
c. [Hex]/[ASCII]: It will be auto selected -> Enter AP encryption  
keys in the box Key1~Key4.  
d. Select the current AP encryption keys from Key1~Key4.  
e. Press [OK] to finish setting.  
Download from Www.Somanuals.com. All Manuals Search And Download.  
13  
 
WLCBGMO Manual  
5.2 Setting WPA  
WPA encryption type can be divided into WPA-PSK,WPA2-PSK,  
WPA(or called WPA-EAP), and WPA2(or called WPA2-EAP). All  
settings should correspond to the settings of the current con-  
nected wireless network.  
WPA-PSK and WPA2-PSK》  
1. Select an AP with [WPA-PSK] or [WAP2-PSK] authentication  
and press [Connect]. Here we use corega A for example.Thus  
the following settings must correspond with corega A.  
2. Setting the [Authentication and Security] Page:  
Download from Www.Somanuals.com. All Manuals Search And Download.  
14  
 
WLCBGMO Manual  
a. Authentication Type: Select [WPA-PSK] .  
b. Encryption: Select [TKIP] or [AES].(Same as AP)  
c. Enter the password in [WAP Preshared Key] box and click  
[OK].  
WPA and WPA2》  
1. Select an AP with [WPA] or [WAP2] authentication and press  
[Connect]. Here we use corega A02 for example.Thus the fol-  
lowing settings must correspond with corega A02.  
2. Setting the [Authentication and Security] Page:  
Download from Www.Somanuals.com. All Manuals Search And Download.  
15  
 
WLCBGMO Manual  
a. Authentication Type: select [WPA].  
b. Encryption: select [TKIP] or [AES](Same as AP)  
c. If the AP/router has [802.1x Setting] function, click it for  
advance setting. Please consult your MIS for details.  
d. Click [OK] to finish setting.  
Download from Www.Somanuals.com. All Manuals Search And Download.  
16  
Utility introduction  
WLCBGMO Manual  
6
Chapter 6 will briefly introduce the sections in the setup utility.  
6.1 Site Survey  
1. The discription of these sections  
• SSID : Name of AP (or called ESSID).  
• BSSID : Mac Address of AP  
• Signal : Signal strength of AP  
• Channel : AP used channel  
• Encryption : what encrypted mechanism does AP used  
• Authentication :What authentication mechanism does AP  
used.  
• Network Type :What Network Type does the AP belong to.  
Generally it is [infrastruture].  
2. Available WLAN list.The  
icon means currently connecting.  
3. [Connected] means connection ok. [Disconnected] means  
connection failed.  
Download from Www.Somanuals.com. All Manuals Search And Download.  
17  
 
WLCBGMO Manual  
4. Click [Rescan] to rescan and upgrade all the AP’s information  
in time  
5. Click [Connect] to start connecting the selected AP.  
6. Save the selected AP’s information to profile. For more details,  
please refer to 6.1.1.  
6.1.1 Add one profile  
1. Select one AP in the SSID column, eg: corega0205=>Click [Add  
to Profile]  
2. Setting items in the [configuration] tab:  
• Profile Name: Enter the connected AP profile, eg: PROF1.  
• SSID: Click the drop-down menu and select one AP.You can  
also enter the AP manually.  
• PSM:When CAM is selected, indicats that the product is not  
in power saving status.When PSM is selected, the product  
is in power saving status. (Only select it under Infrastructure  
nettype).  
• Network Type: [Infrastructure] or [Ad Hoc] type.We recom-  
Download from Www.Somanuals.com. All Manuals Search And Download.  
18  
 
WLCBGMO Manual  
mend you to select [Infrastructure].  
• Transmit power: the amount of power used by a radio trans-  
ceiver to send the signal out. User can choose power value  
by sliding the bar.  
• [RTS Threshold] and [Fragment Threshold] :We recommend  
you to use the default value. User can adjust threshold num-  
bers by sliding the bars or key in the values directly.  
3. Click [OK] and the setted AP will appear in the [Profile] tab.  
6.2 Profile  
• [Add]: Click [Add] to add a new profile.  
• [Delete]: to delete a profile, select one profile name and click  
[Delete].  
• [Edit]:to edit the setting of a profile, select the profile and  
click [Edit].  
• [Activate]: to activate the selected profile, select the profile  
and click [Activate].  
Download from Www.Somanuals.com. All Manuals Search And Download.  
19  
 
WLCBGMO Manual  
6.3 Link Status  
This tab displays the information of the link status.  
• Status: Displays the linked AP name and Mac address.When  
[Disconnect] appears in this box, the connection is failed.  
• Extra Info: link status and strength.  
• Channel:Current channel in use.  
• Link Speed: Show current transmit rate and receive rate.  
• Throughout: Display transmits and receive throughput value.  
• Link Quality: Display connection quality based on signal  
strength and TX/RX packet error rate.  
• Signal Strength: Receive signal strength, user can choose to  
display as percentage or dBm format  
• Noise Level: Display noise signal strength.  
Download from Www.Somanuals.com. All Manuals Search And Download.  
20  
 
WLCBGMO Manual  
6.4 Statistics  
Statistics page displays the detail counter information.  
• Transmit Statistics: Statistic of transmitted frames .  
• Receive Statistics: Statistic of received frames.  
• [Reset Counters]: Click [Reset Counter] to zero the statistic  
numbers of transmitting and receiving data.  
6.5 Advanced settings  
The advanced setting sections are shown as follows.  
Download from Www.Somanuals.com. All Manuals Search And Download.  
21  
 
WLCBGMO Manual  
• Wireless mode: Select wireless network mode(speed)  
- 802.11b/g mixed: Automatically detect 11b or 11g  
- 802.11b only: Frequency only 11b  
- 802.11g only: Frequency only 11g  
• 11b/g Protection: In order to keep the connention stable,  
please select [Auto] to automatically confirm which mode  
the wireless network is in.  
• TX Rate: Manually force the Transmit using selected rate.  
Please accept the default setting.  
• Tx-Burst: Ralink’s proprietary frame burst mode.When it is  
checked, transmit throughput will be improved.(Only work  
when AP support this function. eg: coreag WLBARGMO)  
- Enable TCP Window Size: Extend the Window size of  
TCP.(When checked, the recieve speed will improve.)  
- Fast Roaming at ___ dBm: It will enter romaing mode when  
dBm reaches a level.  
• CCX2.0: Open CCX(supports Cisco Compatible Extensions  
function). Check it when AP supports Cisco.  
- LEAP turn on CCKM: Open CCKM fuction (Cisco Key Man-  
agement).  
- Enable Radio Measurements:Open the function of CCK  
Monitor AP Channel.  
- Non-Serving Channel Measurements... : Select and start to  
moniter if wireless channel is non-serving.  
• Radio Off: Disable wireless radio wave.  
• [Apply] : Click this when finish the settings.  
Download from Www.Somanuals.com. All Manuals Search And Download.  
22  
WLCBGMO Manual  
6.6 IP Information  
The MAC Address and the IP information are displayed in this  
tab. Click[Release] to release IP address, click [Renew] to renew IP  
information.  
6.7 About  
The About tab displays the information of the utility version and  
the driver version.  
Download from Www.Somanuals.com. All Manuals Search And Download.  
23  
 
FAQ
7
There are 2 ways for solving your problems if WLCBGMO can’t  
connect to Internet as below:  
(1) First, please see followingFAQto check your problem.  
latest driver.  
“Supports”=>selectOnline Customer Support, => fill in the  
form, =>clicksubmit. We’ll reply you as soon as possible.  
• Product name: e.g.) WLCBGMO  
• Firmware version: access the management program to check.  
• Your ISP service name.  
• Windows system: e.g.) Windows98/2000/XP and so on.  
• WEB browser(Version): e.g.) IE5.0/5.5/6.0 and so on.  
• Network adapter manufacturer and its driver version.  
• Connection way: fixed IP, dynamic IP or PPPoE dial-up con-  
nection.  
• What are your problem and situation: e.g.) unable to internet.  
• What is the error message or picture?  
Q1.What should I do when it’s not able to connect to the Inter-  
net?  
A: Please make sure if the below processes are complete or not.  
(1) Vertify the product is installed.  
(2) Vertify the driver and the software are configured.  
(3) Vertify the network setting is correct.  
(4) Vertify the security setting is correct.  
(5) Vertify the ESSID setting of AP router correspond to that of  
WLCBGMO.  
(6) Vertify the channel if under Ad-Hoc mode.  
(7) Vertify the wireless Standard of AP is the same as WLCBGMO.  
Download from Www.Somanuals.com. All Manuals Search And Download.  
24  
WLCBGMO Manual  
Q2.How to keep the network connection quality well?  
A:  
(1) Put the AP nearer.  
(2) Remove barriers between AP and laptop.  
(3) Do not place AP on a metal shelf.  
(4) Please keep away from microwave, 2.4GHz cordless phone,  
and medical equipment.  
(5) Change the direction of your laptop or AP.  
Q3.What should I do when I can not find other computers in [My  
Network Places]?  
A:To solve this problem, please open [My Network Places] and  
make sure all computers have the same settings in the net-  
work name.  
Q4.What should I do when there is troubleshooting Informa-  
tionthe of network adapter?  
A:The below symbols indicates that your product installation  
has failed. Please remove the driver and utility of WLCBGMO  
and configure the product again.  
Displays [Other devices] in the hardware tree with a black  
exclamation point!” on a yellow field and a yellow question  
mark?” symbol.  
The network adapter is not listed in the hardware tree of the  
[device Manager] page under [My Computer].  
Displays two or more product name.  
How to solve this problem:  
(1) Right-click on the [Network controller] under [Other de-  
vices] and select [Uninstall].  
(2) When confirm delete message appears,click [OK].  
(3) Follow the manual to install the product again.  
Download from Www.Somanuals.com. All Manuals Search And Download.  
25  
WLCBGMO Manual  
Q5.What should I do when the network adapter icon appears a  
[x] symbol in the [Device Manager] page:  
A:When there is a [x] on the icon, the product is disable.To  
solve this problem, please follow the instructions below:  
Windows XP  
Open [Control Panel]=>Double-click [System]=>Select  
[Hardware] tab=>Click [Device Manager]=>Right-click [CG-  
WLCBGMO]=>select [enable]  
Q6. How to get the latest driver and Utility?  
supports=>download =>selectdriverorUtility, =>select  
and click the model which you want to upgrade.  
Download from Www.Somanuals.com. All Manuals Search And Download.  
26  
Secification  
WLCBGMO Manual  
8
Compliance  
Standard  
IEEE802.11, IEEE802.11b, IEEE802.11g  
LAN Interface  
Protocol  
32bit CardBus  
CSMA/CA  
Transmission  
Method  
DS-SS, OFDM  
Network Type  
Infrastructure/802.11 Ad-Hoc  
Frequency Band/  
Channel  
IEEE802.11b/g: 2.412GHz~2.472GHz  
Transmission Rate  
IEEE802.11b: 11/5.5/2/1Mbps  
IEEE802.11g: 54/48/36/24/18/12/9/6Mbps  
Transmitter  
18.98dBm@11b, 16.38dBm@11g  
Output Power  
Coverage Area  
IEEE802.11b: Indoors 150M, Outdoors 375M(MIMO  
XR Function Enable Range)  
IEEE802.11g(@54Mbps): Indoors 30M, Outdoors 40M  
* Environmental factors may adversely affect wire-  
less signal range  
Security  
WEP(64/128 bits),WPA-EAP (802.1x) / WPA2-EAP  
(802.1x)/WPA-PSK / WPA2-PSK  
Antenna Type  
Antenna Gain  
Support OS  
Planar Inverted F Antenna  
3.48dBi  
Windows 98SE / ME / 2000 / XP  
Power Consumption 1.22W  
Environmental Requirements  
Operating  
Temperature: 0˚C~40˚C Humidity: <90% (non-con-  
densing)  
Storage  
Temperature: -20˚C~60˚C Humidity: <95% (non-  
condensing)  
Physical Specifications  
54(W) x 9(D) x 117(H) mm  
50 g (main unit)  
Dimension  
Weight  
Download from Www.Somanuals.com. All Manuals Search And Download.  
27  

Concord Camera Camcorder Eye Q Mini User Manual
Cooper Lighting Indoor Furnishings 12V MR16 User Manual
Crate Amplifiers Musical Instrument Amplifier FXT30 User Manual
Creative MP3 Player N200 User Manual
Cuisinart Beverage Dispenser CWC 900 User Manual
Curtis MP3 Player MP510 User Manual
Delta Electronics Power Supply VFD E User Manual
Dynacord Battery Charger DEM 313 User Manual
Extron electronic Projector SYSTEM 8 10 PLUS User Manual
Franklin Industries LLC Ice Maker FIM400 User Manual