Cooper Lighting Marine Safety Devices HR87C User Manual

®
COOPER LIGHTING - SURE-LITES  
DESCRIPTION  
Type  
The real workhorse in emergency lighting systems...these durable, reliable  
units are unparalleled in performance and provide freedom from  
maintenance. The HR Series units provide a low-cost, solid-state lighting  
system for applications in industrial, commercial or multi-housing  
environments. High and ultra-high capacity makes them ideal for  
installations where a large number of heads/exits will be remotely operated.  
Catalog #  
Project  
Date  
Comments  
Prepared by  
SPECIFICATION FEATURES  
Electronic  
Housing Construction Cont.  
- Keyhole Mounting Slots  
- White Finish  
Warranty  
- Unit: 1-year  
- Battery: 5-year pro-rata  
- Dual Voltage Input  
120/277 VAC, 60 Hz  
- Line-latching  
Battery  
- Sealed Lead Calcium,  
Recombination  
Head/Lamp Data  
- Two Heads Standard  
- Top Mounted  
- Solid-state Voltage  
Limited Charger  
- Solid-state Switching  
- Low-Voltage Disconnect  
- Brownout Circuit  
- Overload/Short Circuit Protection  
- Test Switch/Power  
Indicator Light  
- Maintenance-Free, Long-Life  
- Full Recharge Time,  
24 hrs. (max.)  
- Glare-Free Lens  
- Fully Adjustable  
- Remote Capability  
- Metal Heads with Die Cast  
Metal Swivel  
- Polarized Battery Terminals  
Code Compliance  
- UL 924 Listed  
- Halogen Lamp Standard  
- Matches Housing Finish  
- Isolation Transformer  
HR87C  
HR117C  
- City of Chicago Approval  
No. 3238  
Housing Construction  
- 18-Gauge Die-Formed  
Steel Housing  
Mounting Requirement  
- Mount only on a vertical plane  
(i.e. wall mount, etc.)  
- Life Safety NFPA 101  
- CSA Certified (HR12117 Only)  
- NEC/OSHA  
HR12117C  
- 18-Gauge Die-Formed  
Steel Cover  
- Most State and Local Codes  
- Knockout, Conduit or Cord Set  
- Universal J-Box Mounting  
Pattern (High Capacity  
Series Only)  
S E A L E D L E A D C A L C I U M  
B AT T E RY  
18"  
[457mm]  
11 3/4"  
[299mm]  
HR180C  
HR12170C  
HR12210C  
HR12360C  
8 1/4"  
17 1/4"  
4 1/4"  
12 1/2"  
[210mm]  
[438mm]  
[108mm]  
[318mm]  
9"  
19 1/4"  
[489mm]  
5 3/4"  
14 1/2"  
[229mm]  
[146mm]  
[368mm]  
Figure 1 High Capacity  
Figure 2 Ultra High Capacity  
U LT R A H I G H C A PA C I T Y  
S E A L E D L E A D C A L C I U M  
B AT T E RY  
ORDERING INFORMATION  
Chicago Code  
SAMPLE NUMBER: HR87CTDM  
Emergency Lighting  
HR  
Options (add as suffix)  
Alternate Lamps: Consult Cooper Lighting  
Representative  
A=Ammeter  
V=Voltmeter  
TDM=Time Delay Monitor  
Other Options: Consult Cooper Lighting  
Representative  
Accessories (order separately)  
VK1=Voltmeter  
3BRWH=Mounting Brackets (3-White Finish)  
2MSWH=Mounting Shelf (High Capacity Units)  
3MSWH=Mounting Shelf (Ultra-High Units)  
CSK120=Cord Set (120 VAC)  
Model Number  
HR87C  
HR117C  
HR12117C  
HR180C  
HR12170C  
HR12210C  
HR12360C  
E N E R G Y D ATA  
HR87C  
HR12170C  
Input Current (Max.):  
120V= 1.08A  
277V= .45A  
HR12210C  
Input Current (Max.):  
120V= 1.02A  
277V= .47A  
HR12360C  
Input Current (Max.):  
120V= 1.17A  
Input Current (Max.):  
120V= .50A  
277V= .21A  
HR117C  
Input Current (Max.):  
120V= .53A  
277V= .22A  
HR12117C  
Input Current (Max.):  
120V= .26A  
277V= .13A  
CSK277=Cord Set (277 VAC)  
VS2=Polycarbonate Vandal Shield  
WG7=Wire Guard (High Capacity units)  
WG3=Wire Guard (Ultra High Capacity units)  
277V= .54A  
HR180C  
Input Current (Max.):  
120V= .98A  
277V= .43A  
Specifications and Dimensions subject to change without notice.  
ADX041293  
08/23/2010 10:54:20 AM  
Consult your representative for additional options and finishes.  
Download from Www.Somanuals.com. All Manuals Search And Download.  
SERIES  
CHICAGO HR 6-VOLT  
ELECTRICAL RATINGS  
Rated Wattage to 87 1/2% of Rated D.C. Voltage  
Lamp Information  
Type  
Wattage  
Number  
29-66  
29-66  
29-45  
29-66  
29-45  
29-45  
29-45  
Figure  
Model  
Type  
SLC  
SLC  
SLC  
SLC  
SLC  
SLC  
SLC  
DC Voltage 1 1/2 Hours Lamp Watts Remote Watts  
Halogen  
Halogen  
Halogen  
Halogen  
Halogen  
Halogen  
Halogen  
12  
12  
12  
12  
12  
12  
12  
1
1
1
2
2
2
2
HR87C  
6
6
12  
6
12  
12  
12  
87  
117  
117  
180  
170  
210  
360  
24  
24  
24  
24  
24  
24  
24  
63  
93  
93  
156  
146  
186  
336  
HR117C  
HR12117C  
HR180C  
HR12170C  
HR12210C  
HR12360C  
*Batteries may be shipped separately.  
SLC=Sealed Lead Calcium  
PHOTOMETRICS  
Horizontal Distribution  
Vertical Distribution  
15  
FEET  
LEFT  
15  
FEET  
LEFT  
LAMP  
AXIS  
1FC  
0.1LAMP  
AXIS  
0.5  
0.3  
0.2  
0.1  
0.5  
0.3  
0.2  
1FC  
0
FEET  
RIGHT  
15  
0
FEET  
RIGHT  
15  
0
20  
30  
40  
50  
60  
0
20  
30  
40  
50  
60  
FEET FROM LAMP (Measured on axis)  
FEET FROM LAMP (Measured on axis)  
Lamp No. 29-45 and 29-66  
Initial Lumens – 302  
Lamp No. 29-45 and 29-66  
TECHNICAL DATA  
Heads  
Line-Latched  
Overload and Short  
Circuit Protection  
Low-Voltage Disconnect  
All metal formed aluminum  
lampheads. The die cast metal  
three dimensional swivel  
assembly permits approximate  
aiming adjustment from 80°  
vertical and 358° rotation. The  
placement is secured with a  
lockable pivot mounted on a  
rotating base ring.  
Sure-Lites’ line-latched  
electronic circuitry makes  
installation easy and  
When the battery’s terminal  
voltage falls below 80% of the  
rated voltage, the low-voltage  
circuitry disconnects the  
lighting load. The disconnect  
remains in effect until normal  
utility power is restored,  
preventing deep battery  
discharge.  
The solid-state overload  
monitoring device in the DC  
circuit disconnects the lamp  
load from the battery should  
excessive wattage demands be  
made and automatically resets  
when the overload or short  
circuit is removed. This  
overload current protective  
feature eliminates the need  
for fuses or circuit breakers  
for the DC load.  
economical. A labor efficient  
AC-activated load switch  
prevents the lamps from turning  
on during installation to  
a non-energized AC circuit.  
Line-latching eliminates the  
need for a contractor’s return  
to a job site to connect the  
batteries when the building’s  
main power is permanently  
turned on.  
Lamps  
Test Switch/Power Indicator  
Light  
Designed specifically for  
Conveniently located Test  
Switch allows for manual  
verification of proper operation  
of the transfer circuit and  
emergency lamps. The Power  
Indicator Light provides visual  
assurance that the AC power  
is on.  
emergency lighting applications,  
the PAR 36 sealed beam type  
design insures optimum glare-  
free light distribution along  
with horizontal and vertical  
adjustment by rotating the lens  
within the housing. Tungsten  
halogen lamps maximize light  
output with lower wattage.  
Brownout Circuit  
Solid-State Charger  
The brownout circuit in Sure-  
Lites’ units monitors the flow  
of AC current to the unit and  
activates the emergency  
Supplied with a 120/277 VAC,  
voltage regulated solid-state  
charger. Immediately upon  
restoration of AC current after  
a power failure, the charger  
provides a high charge rate.  
The charge circuit reacts to the  
condition of the battery and  
alters the rate of charge in  
order to maintain peak battery  
capacity and maximize battery  
life. Solid-state construction  
recharges the battery following  
a power failure in accordance  
with UL 924.  
lighting system when a  
predetermined reduction  
of AC power occurs. This  
dip in voltage will cause most  
ballasted fixtures to extinguish  
causing loss of normal lighting  
even though a total power  
failure has not occurred.  
Sealed Lead Calcium Battery  
Housing  
The fully sealed, long-life,  
maintenance-free lead calcium  
battery is ideal for emergency  
lighting applications. These  
recombinant cycle batteries  
typically provide eight to ten  
years of life and may be  
The rugged 18-gauge die-  
formed steel housing is finished  
with an attractive white  
corrosion-resistant polyester  
powder coat paint. Cabinet has  
keyhole mounting slots,  
universal mounting pattern,  
and knockouts in rear and side  
for AC/DC wiring connections  
and accessory cord set. Up to  
three lighting heads can be  
mounted on the cabinet.  
Solid-State Transfer  
The unit incorporates a solid-  
state switching transistor which  
eliminates corroded and pitted  
contacts or mechanical failures  
associated with relays. The  
switching circuit is designed to  
detect a loss of AC voltage and  
automatically energizes the  
lamps. Upon restoration of  
the AC power, the emergency  
lamps will switch off and the  
charger will automatically  
operated in any position.  
Warranty  
All Sure-Lites’ units are backed  
by a firm one-year warranty  
against defect in material and  
workmanship (excluding  
lamps). Maintenance free,  
long-life, sealed lead calcium  
batteries carry a five-year  
pro-rata warranty.  
recharge the battery.  
Specifications and Dimensions subject to change without notice.  
Sure-Lites • Customer First Center • 1121 Highway 74 South • Peachtree City, GA 30269 • TEL 770.486.4800 • FAX 770.486.4801  
ADX041293  
08/23/2010 10:54:20 AM  
Download from Www.Somanuals.com. All Manuals Search And Download.  

Craftsman Lawn Mower 486248473 User Manual
Craftsman Sander 351215 User Manual
Crown Audio Stereo Amplifier DSi 2000 User Manual
Curtis Water Dispenser MWC501 User Manual
Fisher Price Satellite Radio P6584 User Manual
Fostex Cyclometer DE 1 User Manual
Frigidaire Air Conditioner FRA144HT2 User Manual
Furuno Boating Equipment SC 50 User Manual
Garland Range C0836 15 User Manual
Gateway Computer Monitor VX760 User Manual