AREA
250-1000W
GR GALLERIA ROUND
MH/HPS/SMH
ARCHITECTURAL AREA LUMINAIRE
A
A
B
B
F
C
D
E
C
D
Fixture
A
B
C
D
E
F
250-400W (in.) 18 1/4
3 1/2
89
19 3/4
502
24 1/2
676
6 or 14
16
(mm) 464
152 or 356
406
19 3/4
502
NOTE: In all flat glass configurations only.
1000W (in.)
19 3/4
502
4 1/4
108
25 5/8
651
32 15/16 6 or 14
837 152 or 356
(mm)
STREETWORKS™
HOUSING
ORDERING INFORMATION
Roll-formed aluminum housing with
stamped reveal has interior-welded
seams for structural integrity.
Optional NEMA twistlock
SAMPLE NUMBER: GRA25MWWXX
PRODUCT
FAMILY 1
LAMP
LAMP TYPE 2
VOLTAGE 2
BALLAST
DISTRIBUTION
1D=Type I MCO (Horizontal)
LENS TYPE
OPTIONS +
ACCESSORIES
(See Below)
FG=Flat Glass 3, 5
TYPE 2
S=High Pressure
Sodium
2=120V
0=208V
4=240V
7=277V
8=480V
WATTAGE
25=250W
40=400W
photocontrol. ANSI wattage/source
label.
2D=Type II MCO (Horizontal) SG=Sag Glass
3D=Type III MCO (Horizontal)
3V=Type III (Vertical)
W=CWA
C=CWI
M=Mag. Reg.
GRA=Arm
GRC=Spider
M=Metal
Halide
2 3/8" - 91=1000W
BALLAST
R=SMH
FT=Forward Throw (Horizontal)
AR=Area Round (Vertical)
3" O.D.
Ballast is hard-mounted to housing
interior for cooler operation.
W=Multi-Tap wired 120V
N=Multi-Tap wired 277V
V=Multi-Tap wired 240V
AS=Area Square (Vertical)
RW=Rectangular Wide (Vertical)
SL=Spill Light Eliminator (Horizontal) 3, 4
REFLECTOR
Spun and stamped anodized
aluminum reflector in vertical lamp
units, or hydroformed anodized
aluminum reflector in horizontal
lamp units.
OPTIONS + ACCESSORIES [ Must be listed in the order shown and separated by a dash]
OPTIONS (add as suffix)
ACCESSORIES (order separately)
1=Single Fuse, Internally Mounted (120 or 277)
2=Double Fuse, Internally Mounted (208, 240, or 480V)
4=Photocontrol Receptacle
WH=White
MA1025=14" Arm for Square Pole 7
SPRINGS
MA1026=6" Arm for Square Pole
Aluminum door retaining springs.
MA1006=Direct Mounting Kit for Square Pole
MA1027=14" Arm for Round Pole 7
DOOR
BK=Black
AP=Grey
DP=Dark Platinum
MA1028=6" Arm for Round Pole
Formed aluminum door for
arm-mount fixture has retaining
springs, while spider-mount unit
has a heavy-duty hinge and captive
retaining screws. Door is finished in
polyester powder coat.
MA1009=Direct Mounting Kit for Round Pole
MA1061=House Side Shield—Field Installed (Medium Housing)
MA1062=House Side Shield—Field Installed (Large Housing)
GM=Graphit Metallic
H=Plug-in Starter Receptacle 4
B=House Side Shield
AIR=Arm Included for Round Pole 6
AIS=Arm Included for Square Pole 6
CSR=Color Reveal Stripe—Red
CSB=Color Reveal Stripe—Blue
CSY=Color Reveal Stripe—Yellow
CSG=Color Reveal Stripe—Green
CSD=Color Reveal Stripe—Gold
CSS=Color Reveal Stripe—Silver
CSW=Color Reveal Stripe—White
LENS
Convex tempered glass lens.
Tempered flat glass available.
FINISH
Standard polyester powder coat
finish in bronze. For more color
options see optional colors or
consult your Streetworks
represenatitive for more
information.
OPTIONAL COLORS [ Standard color is bronze, other finish colors available. Consult your Cooper Lighting representative]
WH
BK
AP
DP
GM
White
Black
Grey
Dark Platinum
Graphite Metallic
SHIPPING DATA
Approximate Net Weight:
86 lbs. (40 kgs.)
NOTE: 1 Order arm separately. 2 Refer to technical section for lamp/ballast/voltage compatibility. 3 Must use reduced envelop lamp. 4 Not available in 1000W. 5 Available in 1D, 2D, 3D, FT. AR. 6 Arm length varies based on housing
size. 7 Required for mounting fixtures at 90° increments.
84 STREETWORKS Outdoor Lighting Solutions
Download from Www.Somanuals.com. All Manuals Search And Download.
Cooper Lighting
|