FLOODLIGHTING
150-1000W MH/HPS/MERCURY
GPF GENERAL PURPOSE FLOOD
SLIPFITTER, YOKE, OR TRUNNION-MOUNTED FLOODLIGHT
B
B
B
C
C
C
D
D
E
D
E
A
A
A
YOKE MOUNT
TRUNNION MOUNT
SLIPFITTER MOUNT
Fixture
Yoke
S
A
B
C
D
E
(in.)
20 1/2
521
18 1/2
470
22 1/2
572
4
(mm)
102
2 9/16
65
Trunnion (in.)
(mm)
Slipfitter (in.)
(mm)
20 1/2
521
18 1/2
470
24 3/8
619
3 5/16
84
20 1/2
521
18 1/2
470
28 1/32
712
5 3/16
132
4 11/32
110
NOTE: Depth Dimension: 150-400W HPS and MH, 1000W HPS 9 1/2" [241]. 1000W MH 10 1/2" [267].
STREETWORKS™
LATCHES
ORDERING INFORMATION
Formed aluminum flush
draw-action latches offer easy
access to lamp compartment
without tools.
SAMPLE NUMBER: GPF15SPW764
PRODUCT
FAMILY
GPF=General
Purpose
Flood
LAMP WATTAGE
15=150W
20=200W
25=250W
40=400W
LAMP TYPE 1
S=High Pressure
Sodium
V=Mercury
M=Metal Halide
R=Super Metal Halide
BALLAST TYPE 1
H=Reac./HPF
N=Hi. Reac./NPF
P=Hi. Reac./HPF
R=Reac./NPF
W=CWA
C=CWI
M=Mag. Reg.
K=10KV CWA
VOLTAGE 1
2=120V
0=208V
4=240V
7=277V
8=480V
9=347V
DISTRIBUTION
76=7x6
OPTIONS +
ACCESSORIES
(See Below)
77=7x73
HOUSING
12=1x24
Aerodynamically designed,
architecturally styled die-cast
aluminum housing. Standard dark
bronze polyester powder finish.
Other finish colors available.
Consult your Streetworks
Representative. ANSI
23=2x34
75=750W
24=2x45
91=1000W
24=250/400
wired 250W
42=400/250
wired 400W
43=4x34
W=Multi-Tap wired 120V 44=4x45
N=Multi-Tap wired 277V
55=5x55
62=6x24
65=6x54
5T=5-Tap wired 277V2
wattage/source label. Optional
NEMA twistlock photocontrol
receptacle.
OPTIONS + ACCESSORIES [ Must be listed in the order shown and separated by a dash]
DOOR
Spring-loaded die-cast aluminum
door with integral cast hinges for
removal without tools. Door gasket
is closed-cell silicone, providing
maximum protection of interior
components from the elements.
OPTIONS (add as suffix)
ACCESSORIES (order separately)
OA1179=Top/Bottom Visor
OA1180=Side Visor
OA1181=Wire Guard
OA1182=Vandal Shield
OA1208=TufGuard Vandal Shield
VS/NK=Vandal Shield (For Wattages Below 1000W)
VS/NK/1000=Vandal Shield (For 1000W Units)
1=Single Fuse, Internally Mounted (120 or 277V)
2=Double Fuse, Internally Mounted (208, 240, or 480V)
4=Photocontrol Receptacle
BK=Black
AP=Grey
A=Captive Door Screws
C=Slipfitter 2 3/8" to 3" O.D.—cord thru housing
H=Plug-in Starter Receptacle 6
M=MOV Lightning Surge Protectors 7
R=Removable Power Tray 8
S=Slipfitter 2 3/8" to 3" O.D. with leads thru fitter
T=Trunnion Mount
LENS
Heat- and impact-resistant
tempered glass lens.
REFLECTOR
Computer designed precision
formed reflector system delivers
superior beam control and
efficiency.
U=UL/CSA Listed
W=Wall Mount
BALLAST
OPTIONAL COLORS [ Standard color is bronze, other finish colors available. Consult your Cooper Lighting representative]
Ballast components are hard
mounted to fixture housing for
maximum heat dissipation and
extended component and lamp life.
Plastic terminal block. Prewired
with 3' 14/3 STWA cord.
BK
AP
Black
Grey
MOUNTING
Heavy-duty steel yoke provides flex-
ibility in mounting to a variety of
surfaces. Slipfitter for 2 3/8" to 3"
O.D. tenon and trunnion mount also
available.
EPA:
Effective Projective Area: 2.7
SHIPPING DATA
Approximate Net Weight:
59 lbs. (27 kgs.)
NOTE: 1 Refer to technical section for lamp/ballast/voltage compatibility. 2 250/400W, 400/250W MH, HPS, and 400W MH only. 3 1000W only. 4 Available in MH only. 1000W requires reduced envelope lamp. 5 Available in HPS
only. 6 Not available in 1000W. 7 MOV option is not available for any system requiring a three position terminal block (Example—120/240V incoming line). In order for MOV option to function center terminal of three position
terminal block must be connected to “Earth” ground. 8 400W or below, except for 400W Mag. Reg.
142 STREETWORKS Outdoor Lighting Solutions
Download from Www.Somanuals.com. All Manuals Search And Download.
Cooper Lighting
|