TM
Download from Www.Somanuals.com. All Manuals Search And Download.
Download from Www.Somanuals.com. All Manuals Search And Download.
Emerging trends in light control and environmental preservation
require innovative design solutions. VISION Site responds.
OPTICAL SYSTEMS
- Full Cutoff Performance
- Horizontal Lamp Position
- Rotational Flexibility
FULL CUTOFF PERFORMANCE
As the Nations respected authority on lighting standards and
design recommendations, the IESNA, Illuminating Engineering
Society of North America defines four unique luminaire
cutoff classifications to quantify the amount of light a
fixture directs upward toward the sky.
90°
D A R K S K Y
COMPLIANT
FCO
0°
Full Cutoff
ALLOWABLE CANDELA
Full Cutoff
@ 90°
0
@ 80°
10%
Cutoff
2.5%
5%
10%
FULL CUTOFF
Semi-Cutoff
Non-Cutoff
20%
Full cutoff luminaires carry the endorsement of the International Dark
Sky Association (IDA) for their usefulness in limiting the detrimental
effects of sky glow, otherwise referred to as light pollution.
No Limit
No Limit
Each of the available VISION Site optical systems meets the
strictest "Full Cutoff" classification requirements, ensuring
that zero measurable light is directed upward from the
luminaire.
When faced with local or state adopted lighting ordinances, full cutoff
luminaires offer direct compliance in most all circumstances.
3
VISION SITE Architectural Area Luminaire
Download from Www.Somanuals.com. All Manuals Search And Download.
HORIZONTAL LAMP POSITION
A horizontal lamp orientation allows for a broad
selection of luminaire distribution shapes. Optical
systems are available in Type II, III, IV, SL Forward Throw,
and Square Type V distributions.
2S
3S
4S
SL
5S
ROTATIONAL FLEXIBILITY
Optical assemblies can be rotated in 90° increments without the use of tools, allowing for
manipulation of distribution orientation independent of fixture orientation.
4
VISION SITE Architectural Area Luminaire
Download from Www.Somanuals.com. All Manuals Search And Download.
INVUE segmented optical systems establish themselves as an
industry benchmark for excellence in performance. Our commitment
to optical research and precision build quality result in unequaled
levels of performance and repeatability.
OPTICAL EXCELLENCE
- Flawless Facets
- Rigid Construction
- Lamp Options
- Premium Materials
FLAWLESS FACETS
Reflector facets are flat and unobstructed, allowing for a perfect
reflection of the lamp’s arctube. All segment faces are clean of
rivet heads, tabs, or other means of attachment which may
cause streaking in the light distribution.
RIGID CONSTRUCTION
A rigid box enclosure shields optical facets
on all sides from performance degrading
damage. Each facet bank is secured to both
top and bottom of the enclosure for
repeatable facet orientation relative to
light center.
5
VISION SITE Architectural Area Luminaire
Download from Www.Somanuals.com. All Manuals Search And Download.
LAMP OPTIONS
VISION SITE optical systems are offered with a variety of high efficiency lamp sources.
HIGH PRESSURE SODIUM
High efficacy (lumens per watt), long life.
METAL HALIDE/
COMPACT FLUORESCENT
Energy conscious, good color rendition,
excellent lumen maintenance.
PULSE START METAL HALIDE
Excellent color rendition up to 92 CRI,
high efficacy (lumen per watt).
AVAILABLE LAMP OPTIONS PER
HOUSING SIZE
VXS
VXM
Metal Halide
70, 100, 175W 175, 250, 400W
250, 320, 350, 400W
Pulse Start Metal Halide
High Pressure Sodium
Compact Fluorescent
Electrodeless Fluorescent
70, 100, 150W 150, 250, 400W
ELECTRODELESS FLUORESCENT
100,000 hour life, zero maintenance, good
color rendition.
42, 57W
(2) 57, (2) 70W
85W
Vision Site Premium 95% Reflective Surface
Competitor’s Standard 86% Reflective Surface
PREMIUM MATERIALS
A commitment to using premium
95% reflective aluminum sheet for
all reflective faces allows for efficiency
gains of up to 10%.
100%
100%
95%
86%
PREMIUM MATERIAL
STANDARD MATERIAL
Standard material reflects a lower intensity
of light.
Premium material reflects a higher intensity
of light in a more controllable fashion.
6
VISION SITE Architectural Area Luminaire
Download from Www.Somanuals.com. All Manuals Search And Download.
Download from Www.Somanuals.com. All Manuals Search And Download.
Download from Www.Somanuals.com. All Manuals Search And Download.
The solution for spill light concerns and perimeter lighting
applications is the SLE—Spill Light Eliminator optic.
SLE REFLECTOR—ILLUMINANCE PLOT
SPILL LIGHT CONTROL
- Spill Light Eliminator (SLE)
TYPICAL FORWARD THROW OPTIC—ILLUMINANCE PLOT
SPILL LIGHT ELIMINATOR (SLE):
Allowing less than 2% of the total lamp output to fall behind the pole
with no sacrifice in forward reaching performance the SLE is the benchmark
for effective spill control. Used along site perimeters and property lines,
the SLE keeps the light inside and the darkness out.
9
VISION SITE Architectural Area Luminaire
Download from Www.Somanuals.com. All Manuals Search And Download.
EGRESS + APPLICATIONS
- Egress Emergency Lighting
- Site Lighting Applications
- Mounting Configurations
EGRESS
EMERGENCY LIGHTING
VISION offers two (2) unique solutions
to provide uninterrupted illumination to
the Path of Egress under emergency
conditions.
VISION offers three (3) additional egress
options which provide immediate light
output upon power system reactivation.
42/57/114/140 CF
Fluorescent lamp sources combined
with electronic ballasts achieve full
brightness within seconds of
reactivation.
42CF/EM
Internal battery pack supplies 60% of
the lamp’s initial rated lumens for a
period of ninety minutes in the event of
power failure. Battery supplies power to
one 42W compact fluorescent lamp.
Features LED status indicator light and
battery test switch for system checks.
Q [Quartz Restrike]
Auxiliary quartz socket mounted to
optical assembly. Quartz lamp energizes
upon power reactivation and
EM/SC [Emergency | Separate Circuit]
Auxiliary quartz socket mounted to
optical assembly. Socket is wired to
separate relay controlled emergency
power source.
extinguishes once HID lamp re-ignites.
EM [Quartz Restrike with Time Delay]
Auxiliary quartz socket mounted to
optical assembly. Quartz lamp
energizes upon cold start and power
reactivation, extinguishing once HID
lamp has achieved partial brightness.
SL
SL
Type V
Type V
Type V
Type V
(Egress)
(Egress)
Type IV
Type IV
SITE LIGHTING APPLICATIONS
Each site presents unique challenges of shape, design criteria,
and environmental concerns. Whether designing for Illuminance,
Luminance or Small Target Visibility (STV), the available selection
of distribution shapes, lamp options, and housing sizes provide a
myriad of tools to custom tailor your lighting solution.
Type V
Type V
Type V
Type V
Type II
Egress
Type III
Type II
Type III
Type III
Type III
Type III
Type III
Type III
MOUNTING CONFIGURATIONS
Vision Site is available in seven (7) unique luminaire mounting configurations (flat lens E.P.A’s shown).
Arm Mount 3 @ 120°
E.P.A
VXS 3.6 VXM 4.5
Arm Mount Single
E.P.A
VXS 1.27 VXM 1.6
Arm Mount 2 @ 180°
E.P.A
VXS 2.54 VXM 3.2
Arm Mount 2 @ 90°
E.P.A
VXS 2.54 VXM 3.2
Arm Mount 3 @ 90°
E.P.A
VXS 3.6 VXM 4.5
Arm Mount 4 @ 90°
E.P.A
VXS 4.13 VXM 5.55
Wall Mount
10
VISION SITE Architectural Area Luminaire
Download from Www.Somanuals.com. All Manuals Search And Download.
FORM + PERFORMANCE
VISION BOLLARD
VISION WALL
VISION FLOOD
The Vision Series’ consistency in architectural form and performance allows its use on site lighting projects to provide a coordinated look that
enhances the architectural setting.
SUSPENSION FORM
ICON’s suspension form integrates stainless steel
structural rods between die-cast mounting cleats
to generate a form ideally suited to more dynamic
architectural environments.
11
VISION SITE Architectural Area Luminaire
Download from Www.Somanuals.com. All Manuals Search And Download.
INSTALLATION + MAINTENANCE
- Fixture
- Door
- Ballast Tray
FIXTURE
Fixture attaches through two (2) support bolts (5/16" VXS and 1/2" on VXM)
anchored pole-side to a threaded steel reinforcement plate, then guided through
integral positioning channels in the extruded arm to the back of the housing.
Two (2) lock nuts secure fixture head firmly to arm and pole. Doorframe and
ballast tray feature toolless hinging and removal, allowing ample room for tool
access during installation.
DOOR
Door frame assembly features toolless release and removal. Raised door retainer
on hinge bracket prevents accidental release while hinged down for maintenance.
BALLAST TRAY
One-piece unitized ballast tray can be accessed and removed without the
use of tools. Integral handle ensures safe removal when disengaging and
transporting tray.
12
VISION SITE Architectural Area Luminaire
Download from Www.Somanuals.com. All Manuals Search And Download.
Download from Www.Somanuals.com. All Manuals Search And Download.
Download from Www.Somanuals.com. All Manuals Search And Download.
HOUSING
One-piece, die-cast aluminum housing maintains a nominal 0.125" wall thickness. Integral reveal channels
along top surface of housing promote heat extraction and prolonged electrical component life. Solid cast
wall separates optical chamber from electrical area.
DOOR
One-piece die-cast door frame. Door frame opens in a toolless fashion via release of one (VXS) or
two (VXM) flush mounted toolless latches. Tempered 1/8" thick clear glass lens seals to door with
a weather-tight continuous gasket. Optical chamber is sealed against entry of dirt and moisture by
a continuous door mounted gasket which firmly compresses against optical enclosure walls.
LENS
Impact resistant 1/8" thick tempered clear flat glass.
PRODUCT SPECIFICATIONS
- Features + Benefits
OPTICAL SYSTEMS
Choice of five (5) efficiency segmented optical systems constructed of premium 95% reflective anodized
aluminum sheet. Optical segments are rigidly mounted inside a thick gauge aluminum housing for superior
protection. All segment faces are clean of rivet heads, tabs, or other means of attachment which may cause
streaking in the light distribution. Optional high efficiency hydroformed reflectors available in VXM housing
only in four (4) distributions patterns. All reflector modules feature toolless removal, quick disconnect wiring
plugs, and are field rotatable in 90° increments. HID lamp sources in medium housing (VXM) optics feature
mogul-base lampholders while the small housing (VXS) optics feature medium-base lampholders.
ARM
One-piece extruded rectangular arm available in standard 5" (VXS), or 6", and 10" lengths (VXM). Internal
bolt guides allow easy positioning of fixture during installation to pole or wall surface.
SUSPENSION MOUNT [Not Shown]
Die-cast cleat factory mounted to luminaire and finished in luminaire color. Stainless steel structural rod measures 1/2" in diameter and
is provided in luminaire finish color or optional natural finish. Product works in conjunction with accessory VXS 5" arm and VXM 10" arm.
INVUE poles provided pre-drilled for suspension mount option. See INVUE pole brochure for a complete selection of matching poles.
DIMENSIONS
VXS
6" [152 mm]
VXM
7" [178 mm]
VXS 13 1/2" [343 mm]
VXM 17" [432 mm]
VXS 23" [584 mm]
VXM 28" [724 mm]
VXS 5" [127 mm]
VXM 6" or 10" [152 mm or 254 mm]
15
VISION SITE Architectural Area Luminaire
Download from Www.Somanuals.com. All Manuals Search And Download.
ELECTRICAL TRAY
Ballast and related electrical componentry
are mounted to a reinforced one piece
galvanized steel tray with integral handle.
For ease of maintenance, tray hinges open
via toolless release of one spring loaded
latch. Electrical quick disconnects allow
tray to be completely removed from housing
providing ample hand and tool room for
attachment of fixture during installation,
and a safer servicing environment.
Optional tray mounted fuse connections
offer a distinct and easy to maintain
alternative to common inline fuse
connections.
FINISH
Housing and arm finished in a 5 stage
premium TGIC polyester powder coat paint,
2.5 mil nominal thickness for superior
protection against fade and wear. Standard
colors include black, bronze, grey, white, dark
platinum, and graphite metallic. RAL and
custom color matches available. Consult your
INVUE Lighting Systems Representative for
more information.
Certifications
IP66 Rated [VXS]
IP54 Rated [VXM] 40°C Ambient
CSA Listed
25°C Ambient
U.L. 1598 Listed
ISO 9001
FCO
Full Cutoff
3G Vibration Tested
DRILLING PATTERNS
VXS (TYPE “E”)
VXM (TYPE “M”)
VXS Suspension Mount (TYPE “F”)
VXM Suspension Mount (TYPE “G”)
.312" [8 mm]
dia. hole
.312" [8 mm]
dia. hole
2 11/16''
[69 mm]
2 11/16''
[69 mm]
2 3/4"
[70 mm]
2 3/4"
[70 mm]
3/4'' [20 mm]
dia. hole
3/4'' [20 mm]
dia. hole
7/8'' [23 mm]
3 7/8''
[99 mm]
11"
[280 mm]
13 1/4"
[336 mm]
2 7/16'' [124 mm]
3/4'' [20 mm]
dia. holes
4 7/8'' [124 mm]
3/4'' [20 mm]
dia. holes
(2) 3/8" [10 mm]
dia. holes
(2) 5/8'' [16 mm]
dia. holes
3 7/8" [99 mm]
4 7/8" [124 mm]
3"
2 7/16"
[77 mm]
[62 mm]
(2) 3/8'' [10 mm]
dia. holes
(2) 9/16'' [15 mm]
dia. holes
16
VISION SITE Architectural Area Luminaire
Download from Www.Somanuals.com. All Manuals Search And Download.
MOUNTING OPTIONS + ACCESSORIES
- Specifications + Dimensions
Button-style Photocontrol
or
Photocontrol Receptacle
EXTRUDED ARM
MAST ARM ADAPTER
DIRECT MOUNT
Standard extruded arm features internal bolt
guides. Twin support bolts (5/16" on VXS and
1/2" on VXM) secure fixture to pole. Standard
VXM 10" arm should be utilized when applying
luminaires at 90°. Use standard VXS 5" arm
regardless of luminaire orientation on pole.
Cast aluminum mast arm adapter secures fixture
head to nominal 2" pipe size (2 3/8" O.D.)
horizontal steel tenon arm. Available on VXM
fixture only. Adapter casting slip fits over tenon
arm and is secured via two (2) stainless steel set
screws. Finished to match fixture.
Fixture head mounts directly to pole with no
accessory arm required. Cast adapter piece corrects
housing tilt angle to insure horizontal glass
orientation.
PHOTOCONTROL
Medium VXM fixture available with a gasketed
photocontrol receptacle for mounting of a standard
NEMA base photocell (ordered separately). Small
VXS available with an internal button-style
photocell with sensor located on housing top panel.
WALL MOUNT ADAPTER
POLE MOUNT SUSPENSION
WALL MOUNT SUSPENSION
Two-piece cast aluminum wall mount adapter kit.
Back panel secures to wall via four (4) bolts
(supplied by others). Internal prop rod assembly
supports fixture weight during installation,
providing easy access to internal wiring
compartment. Available as a direct mount kit or
with a 5" (VXS), or 6" (VXM) extruded arm to offset
fixture from wall.
Die-cast aluminum clevis assemblies attach at top
of fixture and pole with stainless steel hardware.
Clevis assemblies are painted to match fixture.
Stainless steel 1/2" diameter structural rod can be
finished to match, or left in natural finish. Use kit
in conjunction with standard VXS 5" or VXM 10"
extruded arm accessories.
Die-cast clevis and extruded arm attached to
finished wall mount plate. Clevis and plate
assemblies are finished to match luminaire.
Stainless steel 1/2" diameter rod can be finished
to match, or left in a natural finish. Use kit in
conjunction with VXS 5" or VXM 10" extruded arm
accessories. Four (4) lag bolts necessary to secure
bracket to wall (provided by others).
Top Cap
12''
[305 mm]
VXM only
VXS only
Set
Screws
HOUSE SIDE SHIELD
VANDAL SHIELD
TENON ADAPTER
Internal house side shield is specially designed to
reduce light concentration behind the pole while
maintaining street side efficiency. Available in
Type II, III, and IV distributions only.
Surface mounted 3/16" thick molded polycarbonate
lens. Treated with UV inhibitor to discourage the
gradual discoloration that results from exposure
to sunlight and metal halide lamps.
Tenon adapters available to slip fit over poles
equipped with nominal 2" pipe size steel tenons
(2 3/8" O.D., 4" length) or nominal 3" pipe size steel
tenons (3 1/2" O.D., 5" length). Adapter secures to
tenon via two (2) stainless steel set screws.
Painted to match fixture.
17
VISION SITE Architectural Area Luminaire
Download from Www.Somanuals.com. All Manuals Search And Download.
ORDERING INFORMATION
Sample Number: VXM-400-MH-MT-3S-BK-PRCPS-L
1
Product Family
VXS=Vision Site
Small
Lamp Type
MH=Metal
Halide
MP=Pulse Start
Metal Halide
HPS=High
Pressure
Sodium
CF=Compact
Fluorescent 9
QL=Electrodeless
Fluorescent
Distribution
Structural Options
(add as suffix)
Pole Mount
PRCPS=Painted Strut Rod and
Clevis Set for Square
Poles14
Options (add as suffix)
F=Single Fuse
(120, 277, or 347V)
Specify Voltage
FF=Double Fuse
(208, 240 or 480V)
Specify Voltage
Accessories (order separately/replace XX with color suffix)
MA1071-XX=VXS 5" Arm For Square Pole
2F=Design 20 Formed 12
2S=Type II
MA1074-XX=VXS 5" Arm For Round Pole
VXM=Vision Site
3F=Type IV 30 Formed 12
3S=Type III
MA1050-XX=VXM 6" Arm For Square Pole
Medium
MA1051-XX=VXM 10" Arm For Square Pole 21
4F=Type V 40 Formed 12
4S=Type IV
MA1052-XX=VXM 6" Arm For Round Pole
Lamp
PRCSS=Stainless Steel Finished
MA1053-XX=VXM 10" Arm For Round Pole 21
2
Wattage
5F=Type V 50 Formed 12
5S=Type V
Strut Rod and Clevis Set Q=Quartz Restrike 17
MA1073-XX=VXS Direct Mount for Square Pole
MA1076-XX=VXS Direct Mount For Round Pole
(Also Strikes at Cold Start) 17 MA1056-XX=VXM Direct Mount for Square Pole
HID
70=70W
for Square Poles 14
PRCPR=Painted Strut Rod and
Clevis Set for Round
Poles 15
EM=Quartz Restrike with Delay
SL=Forward Throw Spill
Light Eliminator
100=100W
150=150W
175=175W
250=250W
320=320W 3
350=350W 3
400=400W 4
Compact
EM/SC=Quartz Emergency
MA1057-XX=VXM Direct Mount for Round Pole
MA1200-XX=VXS Direct Wall Mount Kit 22
MA1077-XX=VXS Wall Mount Kit with 5" Arm 22
MA1201-XX=VXM Direct Wall Mount Kit 22
Separate Circuit 17
Colors
PRCSR=Stainless Steel Finished 42CF/EM=Emergency Battery
Voltage10
(add as suffix/must specify) 13
BK=Black
Strut Rod and Clevis Set
Backup 18
for Round Poles 15
R=NEMA Twistlock Photocontrol MA1054-XX=VXM Wall Mount Kit with 6" Arm 22
120=120V
208=208V
AP=Grey
Wall Mount
Receptacle (VXM Only)
PC=Button Photocontrol
(VXS Only/Specify Voltage)
DS=Dual Fluorescent Switching
Control 19
MA1207-XX=VXM Mast Arm Adapter
240=240V
BZ=Bronze
WRCP=Painted Strut Rod and
MA1101-XX=VXS Single Arm Tenon Adapter for 2 3/8" O.D. Tenon
MA1102-XX=VXS 2 @ 180° Tenon Adapter for 2 3/8" O.D. Tenon
MA1103-XX=VXS 3 @ 120° Tenon Adapter for 2 3/8" O.D. Tenon
MA1104-XX=VXS 4 @ 90° Tenon Adapter for 2 3/8" O.D. Tenon
MA1105-XX=VXS 2 @ 90° Tenon Adapter for 2 3/8" O.D. Tenon
Clevis Set 16
277=277V
WH=White
Fluorescent
347=347V
DP=Dark Platinum
GM=Graphite Metallic
WRCS=Stainless Steel Strut
Rod and Clevis Set 16
42=42W 5
480=480V
6
57=57W 5,
DT=Dual-Tap wired 277V 11
MT=Multi-Tap wired 277V 11
TT=Triple-Tap wired 347V 11
HS=House Side Shield 20
114=(2) 50W 7
140=(2) 70W 7
Electrodeless
Fluorescent
85=85W 8
VS=Polycarbonate Vandal Shield MA1106-XX=VXS 3 @ 90° Tenon Adapter for 2 3/8" O.D. Tenon
T=Terminal Block (VXM Only)
L=Lamp Included
MA1107-XX=VXS 2 @ 120° Tenon Adapter for 2 3/8" O.D. Tenon
MA1108-XX=VXS Single Arm Tenon Adapter for 3 1/2" O.D. Tenon
MA1109-XX=VXS 2 @ 180° Tenon Adapter for 3 1/2" O.D. Tenon
MA1110-XX=VXS 3 @ 120° Tenon Adapter for 3 1/2" O.D. Tenon
MA1111-XX=VXS 4 @ 90° Tenon Adapter for 3 1/2" O.D. Tenon
MA1112-XX=VXS 2 @ 90° Tenon Adapter for 3 1/2" O.D. Tenon
MA1113-XX=VXS 3 @ 90° Tenon Adapter for 3 1/2" O.D. Tenon
MA1114-XX=VXS 2 @ 120° Tenon Adapter for 3 1/2" O.D. Tenon
MA1017-XX=VXM Single Arm Tenon Adapter for 2 3/8" O.D. Tenon
MA1018-XX=VXM 2 @ 180° Tenon Adapter for 2 3/8" O.D. Tenon
MA1019-XX=VXM 3 @ 120° Tenon Adapter for 2 3/8" O.D. Tenon
MA1045-XX=VXM 4 @ 90° Tenon Adapter for 2 3/8" O.D. Tenon
MA1048-XX=VXM 2 @ 90° Tenon Adapter for 2 3/8" O.D. Tenon
MA1115-XX=VXM 3 @ 90° Tenon Adapter for 2 3/8" O.D. Tenon
MA1116-XX=VXM 2 @ 120° Tenon Adapter for 2 3/8" O.D. Tenon
MA1010-XX=VXM Single Arm Tenon Adapter for 3 1/2" O.D. Tenon
MA1011-XX=VXM 2 @ 180° Tenon Adapter for 3 1/2" O.D. Tenon
MA1012-XX=VXM 3 @ 120° Tenon Adapter for 3 1/2" O.D. Tenon
MA1013-XX=VXM 4 @ 90° Tenon Adapter for 3 1/2" O.D. Tenon
MA1014-XX=VXM 2 @ 90° Tenon Adapter for 3 1/2" O.D. Tenon
MA1016-XX=VXM 3 @ 90° Tenon Adapter for 3 1/2" O.D. Tenon
MA1015-XX=VXM 2 @ 120° Tenon Adapter for 3 1/2" O.D.Tenon
OA/RA1016=Photocontrol—Multi-Tap
NOTE: 1 Arm not included. See accessories. 2 All HID lamps are mogul-base in VXM and medium-base in VXS. 3 Pulse Start Metal Halide only (320 and 350W). 4 400W MH requires
reduced envelope ED28 Lamp. 5 Compact Fluorescent only. Available in VXS with Type 3S, 4S and 5S distributions only. 6 Nominal M.O.L. lamp length of 57W CFL not to
exceed 7". 7 Dual 57 and dual 70W Compact Fluorescent lamp option available in VXM housing in Type 4S distribution only. 8 Electrodeless Fluorescent QL lamp only.
Available in VXM housing in Type 3S and 5S distributions only. 120V only. 9 Compact Fluorescent ballasts contain internal fusing. No supplemental fusing is necessary.
CF ballast are 120 through 277V. 10 Products also available in non-US voltages and 50Hz for international markets. Consult factory for availability and ordering information.
11 Dual-Tap is 120/277V wired 277V. Multi-Tap is 120/208/240/277V wired 277V. Triple-Tap ballast is 120/277/347V wired 347V. 12 2F, 3F, 4F, 5F and SL optics available in
VXM only. 13 RAL and custom color matches available. Consult your INVUE Lighting Systems Representative for more information. 14 Square pole mount structural options
do not include arm assembly (See Accessories). Compatible with 5" MA1071 arm for VXS, or 10" MA1051 arm for VXM only. 15 Round pole mount structural options do not
include arm assembly (See Accessories). Compatible with 5" MA1074 arm for VXS, or 10" MA1053 arm for VXM only. 16 Wall mount structural options do not include arm
assembly (See Accessories). Compatible with 5" MA1071 arm for VXS, or 10" MA1051 arm for VXM only. 17 Quartz options not available with SL optic. 18 Battery backup
provides 90 minutes of supplemental light at 60% of initial rated lamp lumens. VXS Type 3S, 4S, 5S optics only. Must specify 42W Compact Fluorescent lamp. 19 Dual
switching requires dual 57W or dual 70W Compact Fluorescent lamps, and allows independent switching control of each lamp through use of two (2) electronic ballasts.
Allows 50% power reduction. 20 House side shield not available on 5S and SL optics. 21 Use when mounting VXM fixture heads at 90° increments. 22 For use in down
lighting applications only.
DIMENSIONS
VXS
6" [152 mm]
VXM
OA/RA1027=Photocontrol—480V
OA/RA1201=Photocontrol—Multi-tap (347V)
7" [178 mm]
VXS 13 1/2" [343 mm]
VXM 17" [432 mm]
VXS 23" [584 mm]
VXM 28" [724 mm]
VXS 5" [127 mm]
VXM 6" or 10" [152 mm or 254 mm]
DRILLING PATTERNS
VXS (TYPE “E”)
VXM (TYPE “M”)
VXS Suspension Mount (TYPE “F”)
VXM Suspension Mount (TYPE “G”)
.312" [8 mm]
dia. hole
.312" [8 mm]
dia. hole
2 11/16''
[69 mm]
2 11/16''
[69 mm]
2 3/4"
[70 mm]
2 3/4"
[70 mm]
3/4'' [20 mm]
dia. hole
3/4'' [20 mm]
dia. hole
7/8'' [23 mm]
11"
[280 mm]
13 1/4"
[336 mm]
2 7/16'' [124 mm]
3 7/8''
[99 mm]
3/4'' [20 mm]
dia. holes
4 7/8'' [124 mm]
3/4'' [20 mm]
dia. holes
(2) 3/8" [10 mm]
dia. holes
(2) 5/8'' [16 mm]
dia. holes
3 7/8" [99 mm]
4 7/8" [124 mm]
3"
2 7/16"
[77 mm]
[62 mm]
(2) 3/8'' [10 mm]
dia. holes
(2) 9/16'' [15 mm]
dia. holes
WATTAGE TABLE
SHIPPING DATA
POLES
INVUE Lighting Systems
offers a comprehensive
package of steel,
aluminum and decorative
poles to suit any site
lighting application.
Consult the INVUE Poles
brochure for ordering
information and product
specifications.
VXS
VXM
VXS
35
VXM
51
Metal Halide
70, 100, 175W 175, 250, 400W
250, 320, 350, 400W
Net. Weight (lbs.)
Volume (cu. ft.)
E.P.A.
Pulse Start Metal Halide
High Pressure Sodium
Compact Fluorescent
Electrodeless Fluorescent
3.00
1.05
3.18
1.30
70, 100, 150W 150, 250, 400W
42, 57W
(2) 57, (2) 70W
85W
NOTE: The above are approximate weights and volumes.
STANDARD COLORS
BK
Black
AP
Grey
BZ
Bronze
WH
White
DP
GM
Dark Platinum
Graphite Metallic
18
VISION SITE Architectural Area Luminaire
Download from Www.Somanuals.com. All Manuals Search And Download.
CUSTOMER FIRST CENTER
1121 HIGHWAY 74 SOUTH
PEACHTREE CITY, GEORGIA 30269
770.486.4800
The Cooper Lighting Family
Halo
Portfolio
Metalux
FAX: 770.486.4801
Neo-Ray
Corelite
Lumark
Domestic Facilities, USA
Cranbury, New Jersey
Elk Grove Village, Illinois
Irving, Texas
Ontario, California
Peachtree City, Georgia
INVUE
McGraw-Edison
Streetworks
Sure-Lites
Fail-Safe
Shaper
Iris
International Sales, USA
Lumie` re
Peachtree City, Georgia
MWS
CANADA
Cooper Lighting
5925 McLaughlin Road
Mississauga, Ontario L5R 1B8
905.507.4000
Fax: 905.586.7049
Domestic Facilities, Canada
Calgary, Alberta
Chomedey, Laval P.Q.
Cooper Lighting
All rights reserved
Printed in USA
VISION SITE
ARCHITECTURAL AREA LUMINAIRE
AVU031492
Download from Www.Somanuals.com. All Manuals Search And Download.
|