TM
Download from Www.Somanuals.com. All Manuals Search And Download.
Download from Www.Somanuals.com. All Manuals Search And Download.
FLOODLIGHTING FUNDAMENTALS
- Inverse Square Cosine Law
Footcandle levels are ultimately dependent upon the projected distance, aiming angle, and luminous intensity of a lamp/reflector combination.
A cursory understanding of the equation which relates these variables provides insights to proper design technique and distribution selection.
INVERSE SQUARE COSINE LAW
E=I cos (x)/D2 -or-
Illuminance (Footcandles, fc) = Luminous Intensity (Candelas, Cd) * cos (incident angle X) / Distance2
Holding other variables constant, as the projected distance increases from the luminaire to the surface being illuminated, a greater amount
of luminous intensity (I, Candela) is required to sustain an equal illuminance (E, Footcandle) level.
2
E D
2
E D
I=
I=
E=5 fc
COS (x)
COS (x)
X=30°
2
5 fc (20')
2
E=5 fc
5 fc (10')
=
2,310 candela
=
577 candela
X=30°
COS (30°)
COS (30°)
30°
30°
Holding incident angle X constant at 30Ëš while increasing the projected distance D from 10' to 20' requires an increase in candela from
577 to 2310 respectively to sustain an equal 5 footcandles (fc) of illumination at the target point.
The incident angle as measured from a luminaire’s directed intensity to the target surface normal also plays a significant role in determining
illuminance values. Holding other variables constant as the incident angle from the target surface to the projected aiming line increases, so does
the amount of luminous intensity (I, Candela) required to sustain an equal illuminance value.
2
2
E D
E D
E=fc
I=
I=
X=45°
COS (x)
COS (x)
E=5 fc
X=30°
2
2
5 fc (10')
5 fc (10')
=
577 candela
=
707 candela
COS (30°)
COS (45°)
45°
30°
Holding projected distance D constant at 10' while increasing incident angle X from 30Ëš to 45Ëš requires an increase in candela from
577 to 707 respectively to sustain an equal 5 footcandles (fc) of illumination at the target point.
3
VISION FLOOD Architectural Flood Luminaire
Download from Www.Somanuals.com. All Manuals Search And Download.
FLOODLIGHTING TERMINOLOGY
- Floodlighting Terminology
- NEMA [IES] Classifications
FLOODLIGHTING TERMINOLOGY
Ever wonder how NEMA (H x V) Classifications are derived, or how they relate
to the performance and design application of a floodlighting distribution?
How about beam and field angles, and maximum candela values?
FIG. 1
- Maximum Candela is defined as the maximum candela value emitted
from the luminaire in any given direction.
90°
80°
90°
80°
- Beam angle is defined as the included angle between points of 50%
of Maximum Candela.
Field Angle
70°
60°
70°
60°
0
0
0
- Field Angle is defined as the included angle between points of 10%
of Maximum Candela.
50°
45°
50°
45°
0
Beam Angle
As an example, a distribution with a 50,000 Cd maximum candela value
as shown in the intensity distribution graph to the right (FIG. 1) would have a
Beam Angle defined by the included angle of 25,000 Cd values, and a Field
Angle defined by the included angle of 5,000 Cd values.
0
40°
40°
0
00
00
30°
30°
EXAMPLE
20°
20°
000
0°
10°
10°
Max Candela = 50,000 Cd
Candela Value defining Beam Angle = (50% * 50,000 Cd) = 25,000 Cd
Candela Value defining Field Angle = (10% * 50,000 Cd) = 5,000 Cd
Beam Angle = 90°
Field Angle = 120°
NEMA [IES] CLASSIFICATIONS
NEMA classifications are extrapolated from the table below and are determined by a distribution’s Field Angle. This relative classification is used
to describe the general shape and application of a distribution. NEMA classifications are used to classify both the horizontal and vertical
components of a floodlight distribution.
The example distribution in FIG. 1 above would have a NEMA Classification of 6 as the 120° Field Angle falls between the 100-130° range.
NEMA Beam
Classification
Field Angle
Range
Description +
Setback
1
2
3
4
5
6
7
10-18°
Narrowest Beam, Long Setback
Narrow Beam, Long Setback
Narrow Beam, Long Setback
Medium Beam, Medium Setback
Medium Beam, Medium Setback
Wide Beam, Shorter Setback
Widest Beam, Short Setback
18-29°
29-46°
46-70°
70-100°
100-130°
130°-Greater
4
VISION FLOOD Architectural Flood Luminaire
Download from Www.Somanuals.com. All Manuals Search And Download.
VISION Flood offers a host of beam control options that limit
unwanted stray light and control direct viewing
of the lamp source.
SPILL + GLARE CONTROL
- Internal Louvers
- External Grid Louvers
- Top Visor
- 4 Sided Shield
- Barn Doors
- Rectangular Beam Patterns
Limiting the amount of stray light which falls beyond the boundaries of the intended target is not only good design practice, but is increasingly
a mandate of local and state adopted lighting ordinances. The VISION Flood series offers a family of beam control options to limit unwanted stray
light and control direct viewing of the lamp, a common source of discomfort and disability glare.
INTERNAL LOUVERS
Standard on Narrow Spot and Narrow Flood
distributions, integral ring louver controls lamp
glare while eliminating spill light outside the
main beam.
Without Internal Louvers
With Internal Louvers
EXTERNAL GRID LOUVERS
Designed to control lamp glare and spill light
while maintaining beam efficiency. Useful when
aiming direction or intended target lies in close
proximity to pedestrian and/or motor vehicle
activity. Mounts to accessory channel in
doorframe. Compatible with all distributions.
Available on VFM only.
With External Louvers
Without External Louvers
5
VISION FLOOD Architectural Flood Luminaire
Download from Www.Somanuals.com. All Manuals Search And Download.
TOP VISOR
Controls excess spill and glare on top portion
of distribution. Especially useful in uplighting
applications to limit light travel above an
intended wall surface or sign. Mounts to
accessory channel in doorframe. Compatible
with all distributions.
With Top Visor
Without Top Visor
4-SIDED SHIELD
Controls lamp glare and spill light in all
directions. Useful when aiming direction or
intended target lies in close proximity to
pedestrian and/or motor vehicle activity.
Mounts to accessory channel in doorframe.
Compatible with all distributions. Available on
VFM only.
With 4-Sided Shield
Without 4-Sided Shield
BARN DOORS
Four (4) independently mounted and adjustable
doors control cutoff angles in all directions,
allowing custom distribution control. Compatible
with all distributions.
Without Barn Doors
With Barn Doors
RECTANGULAR BEAM PATTERNS
Structures, signs, and other various objects which
dominate our visual landscape are largely defined
by straight lines and planar surfaces. Lighting
these objects with rectangular distributions
eliminates excess spill light while maintaining
optimal uniformity.
Typical Round Beam Patterns
Rectangular Beam Patterns
Typical round patterns create shadows in
corners, requiring closer fixture
Rectangular beams produce more
uniform coverage, resulting in reduced
fixture counts and less stray light
spilling beyond the intended target.
spacings. Uniformity is compromised.
6
VISION FLOOD Architectural Flood Luminaire
Download from Www.Somanuals.com. All Manuals Search And Download.
DESIGN GUIDE
- Illumination Recommendations
- Beam Pattern Information
ILLUMINATION RECOMMENDATIONS
Effective floodlighting design is a complex and subjective task. Results are heavily dependent upon surrounding light levels, surface finish of the
intended target, spectral color distribution of the lamp source, mounting location allowances, and viewers perceptions.
The following table lists IESNA (Illuminating Engineering Society of North America) recommended illuminance levels for the floodlighting of
buildings and monuments.
Area
Description
Target Surface
Finish
Average Target
Illuminance
Bright Surroundings
Bright Surroundings
Bright Surroundings
Dark Surroundings
Dark Surroundings
Dark Surroundings
Dark Surroundings
Light Surfaces
5 fc
7 fc
10 fc
2 fc
3 fc
4 fc
5 fc
Medium Light Surfaces
Dark Surfaces
Light Surfaces
Medium Light Surfaces
Medium Dark Surfaces
Dark Surfaces
Cooper Lighting Application Engineers are available to assist in providing design layouts, aiming diagrams, and illuminance plots for your next
floodlighting project. Consult your INVUE Lighting Systems Representative for more information.
BEAM PATTERN INFORMATION
NEMA
IES
Type
Beam
(50% Max. Candela)
in Degrees
Field Angle
(10% Max. Candela)
in Degrees
Maximum
Candela
Value
Lamp
Wattage
Lamp
Type
Beam
Pattern
Total
Efficiency
1
175W MH
ED-17
Narrow Spot
Narrow Flood
Medium Flood
Wide Flood
Vertical Flood
Horizontal Spot
1 H x 3 V
3 H x 3 V
5 H x 3 V
7 H x 6 V
7 H x 6 V
6 H x 6 V
7 H x 15 V
16 H x 23 V
52 H x 18 V
70 H x 55 V
98 H x 58 V
80 H x 27 V
17 H x 33 V
30 H x 45 V
74 H x 41 V
132 H x 103 V
147 H x 130 V
111 H x 120 V
102,434
53,892
25,698
8,346
5,420
10,694
60%
71%
84%
84%
71%
83%
2
400W MH
BT-37
Narrow Spot
Narrow Flood
Medium Flood
Wide Flood
Vertical Flood
Horizontal Spot
1 H x 2 V
2 H x 3 V
4 H x 4 V
7 H x 6 V
7 H x 7 V
5 H x 5 V
8 H x 16 V
14 H x 27 V
23 H x 36 V
48 H x 49 V
137 H x 101 V
145 H x 139 V
94 H x 90 V
304,593
162,701
92,191
20,734
14,761
34,463
41%
50%
81%
81%
74%
61%
12 H x 19 V
22 H x 23 V
86 H x 58 V
106 H x 57 V
86 H x 15 V
3
1000W MH BT-37
Narrow Spot
Narrow Flood
Medium Flood
Wide Flood
Vertical Flood
Horizontal Spot
1 H x 4 V
2 H x 4 V
4 H x 4 V
7 H x 6 V
7 H x 7 V
6 H x 5 V
5 H x 16 V
13 H x 48 V
29 H x 55 V
53 H x 68 V
139 H x 116 V
152 H x 135 V
105 H x 96 V
633,201
279,879
197,476
52,625
42,981
51%
53%
78%
83%
76%
64%
14 H x 27 V
23 H x 33 V
85 H x 74 V
111 H x 55 V
85 H x 16 V
99,290
4
150W HPS
400W HPS
ED-17
ED-18
Narrow Spot
Narrow Flood
Medium Flood
Wide Flood
Vertical Flood
Horizontal Spot
1 H x 4 V
3 H x 4 V
5 H x 4 V
7 H x 6 V
7 H x 6 V
5 H x 6 V
9 H x 23 V
21 H x 31 V
49 H x 27 V
8 x 69 V
99 H x 55 V
77 H x 14 V
17 H x 46 V
31 H x 57 V
77 H x 54 V
136 H x 109 V
145 H x 126 V
95 H x 112 V
74,261
41,007
23,522
7,567
6,331
18,237
61%
70%
81%
79%
69%
84%
5
Narrow Spot
Narrow Flood
Medium Flood
Wide Flood
Vertical Flood
Horizontal Spot
1 H x 4 V
2 H x 4 V
4 H x 5 V
7 H x 6 V
7 H x 7 V
6 H x 5 V
6 H x 20 V
13 H x 47 V
27 H x 52 V
54 H x 71 V
140 H x 117 V
145 H x 137 V
102 H x 100 V
260,454
112,314
86,573
21,630
20,686
44,433
48%
44%
78%
80%
75%
62%
15 H x 27 V
23 H x 33 V
88 H x 80 V
102 H x 60 V
81 H x 15 V
1 If using a 100W MH lamp, apply a 0.629 scaling factor to the 175W MH maximum candela values.
2 If using a 250W MH lamp, apply a 0.569 scaling factor to the 400W MH maximum candela values.
3 If using a 750W MH lamp, apply a 0.745 scaling factor to the 1000W MH maximum candela values.
4 If using a 100W HPS lamp, apply a 0.594 scaling factor to the 150W HPS maximum candela values.
5 If using a 250W HPS lamp, apply a 0.55 scaling factor to the 400W HPS maximum candela values.
7
VISION FLOOD Architectural Flood Luminaire
Download from Www.Somanuals.com. All Manuals Search And Download.
COLOR CAPABILITIES
Infusing color to a visual landscape elicits attention,
emotion, and intrigue.
COLOR CAPABILITIES
VISION Flood can be specified with one of four (4) standard color gels: Deep Green, Bright Blue, Red or Warm Orange. Dichoric glass filter options
and custom colors are also available. Consult your INVUE Lighting Systems Representative for more information.
WITH COLOR FILTER
ADAPTER
METAL HALIDE
DEEP GREEN FILTER
HIGH PRESSURE SODIUM
DEEP GREEN FILTER
METAL HALIDE
BRIGHT BLUE FILTER
HIGH PRESSURE SODIUM
BRIGHT BLUE FILTER
METAL HALIDE
RED FILTER
HIGH PRESSURE SODIUM
RED FILTER
METAL HALIDE
WARM ORANGE FILTER
HIGH PRESSURE SODIUM
WARM ORANGE FILTER
NOTE: Color representations are for comparative purposes only, and do not imply achieved color in application which is dependent upon lamp
source, optic, and target surface properties.
8
VISION FLOOD Architectural Flood Luminaire
Download from Www.Somanuals.com. All Manuals Search And Download.
Download from Www.Somanuals.com. All Manuals Search And Download.
Download from Www.Somanuals.com. All Manuals Search And Download.
With six (6) uniquely shaped optical distributions, the VISION Flood
provides targeted lighting solutions for facade, sign, landscape,
architectural highlighting, and more.
OPTICAL CONFIGURATIONS
All optical systems are fully interchangeable, featuring toolless release fasteners and wire connectors.
NARROW SPOT [NS]
The Narrow Spot distribution creates a
narrow column of light, free from spill light
8°
outside the main beam. Ideal for
illuminating columns, small architectural
16°
details, tall trees, high mount signage, and
flagpoles. Generally used with farther
setbacks.
NARROW FLOOD [NF]
Designed for applications where a tight,
symmetrical beam is required, often with
12°
farther setbacks. Ideal for longer distance
19°
facade highlighting, flag lighting, and high
mount signage.
MEDIUM FLOOD [MF]
Designed for applications requiring a wider,
rectangular pattern of uniform illumination.
22°
Ideal for medium setback floodlighting of
23°
facades, signage, general landscape, and
indirect canopy lighting.
11
VISION FLOOD Architectural Flood Luminaire
Download from Www.Somanuals.com. All Manuals Search And Download.
OPTICAL CONFIGURATIONS
WIDE FLOOD [WF]
Designed for applications requiring a wide
rectangular pattern of uniform illumination.
Generally used with shorter setbacks to
floodlight large facades, signage, and broad
leaf foliage. Also effective in pole mount
applications for general area illumination.
86°
58°
VERTICAL FLOOD [VF]
Designed to illuminate tall facades and
signage in limited setback applications.
In pole mount applications, the Vertical
Flood produces a broad forward throw
distribution ideal for area lighting.
57°
106°
HORIZONTAL SPOT [HS]
The Horizontal Spot optic creates a
concentrated pattern that is wide
86°
horizontally, yet tight vertically. Ideal for
lighting wide ground mount signage, and
highlighting wide building-mounted objects
and signage. Also ideal in wall mount and
short setback applications to graze a wall
surface, creating depth and contrast that
accentuates architectural details.
15°
VISION Flood Premium 95% Reflective Surface
Competitor's Standard 86% Reflective Surface
PREMIUM MATERIALS
A commitment to using premium
95% reflective aluminum sheet for
all reflective faces allows for efficiency
gains of up to 10%.
100%
95%
86%
PREMIUM MATERIAL
STANDARD MATERIAL
Standard material reflects a lower intensity
of light.
Premium material reflects a higher intensity
of light in a more controllable fashion.
12
VISION FLOOD Architectural Flood Luminaire
Download from Www.Somanuals.com. All Manuals Search And Download.
VISION Flood luminaires provide unsurpassed levels of protection
against entry of airborne contaminants. With a certified IP65 fixture
rating, dust, insects, and moisture simply have no chance of
penetrating the fixture’s outer enclosure.
FIXTURE SEALING
- IP Rating
IP RATING
"IP" stands for Ingress Protection and is a rating system established
I
P
6
5
by the European organization IEC, International Electrotechnical
Commission. Over 50 countries strong, this organization publishes
international standards for electrical products and other related
technologies. The two numbers proceeding the "IP" individually callout
the fixture’s protection ratings against airborne particulates and moisture
respectively.
Ingress
Protection
Complete
protection
against
dust entry
No moisture
within fixture
after a constant
100L/min. pressure
jet spay from all
practical directions
13
VISION FLOOD Architectural Flood Luminaire
Download from Www.Somanuals.com. All Manuals Search And Download.
LAMP SOURCE OPTIONS
- Metal Halide | Pulse Start Metal Halide
- High Pressure Sodium
LAMP OPTIONS
VISION Flood optical systems are offered with a variety of high efficiency lamp sources.
METAL HALIDE/
HIGH PRESSURE SODIUM
Produces an yellowish-orange light with
high efficacy (lumens per watt) and long
life.
AVAILABLE LAMP OPTIONS PER
HOUSING SIZE
PULSE START METAL HALIDE
Produces a whitish-blue light, excellent
color rendition up to 92 CRI, and high
efficacy (lumens per watt).
VFS
VFM
Metal Halide
50, 70, 100, 175W 175, 250, 400, 1000W
250, 320, 350, 400, 750W
Pulse Start Metal Halide
High Pressure Sodium
APPLICATION: HPS sources add a
richness and warmth that best
complements brick, wood, and dark
colored masonry or stone surfaces.
50, 70, 100, 150W 150, 250, 400W
APPLICATION: Generally, Metal Halide
sources best compliment concrete
surfaces, light colored masonry, foliage,
and bright colored objects and surfaces.
AIMING VERSATILITY
- Taper Lock Knuckle
- Competitor’s Tooth Lock Knuckle
Limited
Infinite Aiming
Incremental
Aiming
20°
15°
10°
5°
TAPER-LOCK KNUCKLE
COMPETITOR’S TOOTH LOCK KNUCKLE
The taper-lock knuckle featured on all VISION Flood luminaires is a
powerful differentiator that insures ultimate aiming flexibility, and
rock solid strength.
Competitors tooth lock knuckle designs notably limit the vertical
aiming adjustment of the luminaire, making it more difficult to
achieve desired uniformity ratios and cutoff control. Typical tooth
lock designs are limited to adjustments in increments of 5 to 7.5°.
VISION Flood’s taper-lock mechanism allows for infinite vertical aiming
adjustment within the fixture’s aiming range. This feature empowers
Designers with ultimate aiming discretion, and allows installers or end
users the ability to visually optimize the distribution once installed to
deliver exacting performance.
14
VISION FLOOD Architectural Flood Luminaire
Download from Www.Somanuals.com. All Manuals Search And Download.
Download from Www.Somanuals.com. All Manuals Search And Download.
Download from Www.Somanuals.com. All Manuals Search And Download.
HOUSING
One-piece, die-cast aluminum housing maintains a nominal .125" thickness to endure the
toughest environments while maintaining precise tolerance control.
DOOR
Die-cast aluminum door maintains a nominal .125" thickness and features concealed
hinging to the housing. Door is secured with four (4) tamper resistant recessed stainless
steel allen head fasteners. Door frame features an integral accessory channel for the
mounting of optional light control accessories. Doorframe seals to housing with a
continuous extruded silicone gasket. Lens is impact resistant .180" thick tempered clear
flat glass, sealed to the door with a one-piece silicone gasket.
PRODUCT SPECIFICATIONS
- Features + Benefits
OPTICAL ASSEMBLY
Choice of six (6) high efficiency optical systems constructed of premium 95% reflective
anodized aluminum sheet, or bright specular anodized polished spun aluminum. Available
distributions include Narrow Spot, Narrow Flood, Medium Flood, Wide Flood, Horizontal
Spot, and Vertical Flood. All reflector modules feature toolless removal, quick disconnect
wire connections, and are field interchangeable. Medium housing (VFM) optics feature
mogul-base lampholders while small housing (VFS) optics feature medium-base
lampholders.
KNUCKLE
Heavy-duty die-cast aluminum knuckle utilizes a taper-lock adjustment mechanism for
both solid engagement and infinite aiming adjustment. Knuckle adjustment is made via
one (1) captive stainless steel allen head fastener consistent with doorframe fasteners.
Tested to sustain 3G of vibration without loosing aiming position. VFS knuckle features a
3/4" NPT nipple on bottom surface for rigid attachment to available mounting
accessories. Optional slipfitter mount available for VFS. VFM lower knuckle slip-fits over
a standard 2" pipe size (2 3/8" O.D.) tenon.
ELECTRICAL COMPONENTS
High Power Factor (HPF) ballast components are strategically located and heat sunk to
the housing for cooler operation and longer life. The VFS housing is rated for 40°C
(104°F) ambient environments.
17
VISION FLOOD Architectural Flood Luminaire
Download from Www.Somanuals.com. All Manuals Search And Download.
FINISH
Housing and arm finished in a 5 stage
premium TGIC polyester powder coat paint,
2.5 mil nominal thickness for superior
protection against fade and wear. Standard
colors include black, bronze, grey, white, dark
platinum, and graphite metallic. RAL and
custom color matches available. Consult your
INVUE Lighting Systems Representative for
more information.
Certifications
IP65 Rated U.L. 1598 Listed 3G Vibration Rated ISO 9001
CSA Listed
40°C Ambient [VFS]
25°C Ambient [VFM]
DIMENSIONS
Vision Flood Small [VFS]
Vision Flood Medium [VFM]
10"
[254 mm]
16 1/2"
[419 mm]
X
7 1/2"
[191 mm]
X=2 15/16"
[75 mm]
14" [356 mm]
7 11/16"
[196 mm]
23" [584 mm]
11 13/64" [284 mm]
18
VISION FLOOD Architectural Flood Luminaire
Download from Www.Somanuals.com. All Manuals Search And Download.
VFS MOUNTING OPTIONS + SPECIFICATIONS
- Specifications + Dimensions [VFS Standard Mount]
3/4" [20 mm] Dia.
3/4" [20 mm] Dia.
5"
[127 mm]
4 1/2"
[115 mm]
190°
190°
4" [102 mm]
4 1/4"
[108 mm]
VFS STANDARD MOUNT
JUNCTION BOX [JB]
SLIPFITTER [SF]
The VFS knuckle features a 3/4" NPT threaded
nipple on its bottom surface for direct mounting to
the following accessories: Junction Box (JB),
Slipfitter (SF), Stanchion Mount (SM), Twin Arm
Mount (TMA), Wall Mount Arm (WMA), Wall Mount
(WM), and Post Mount Extensions (PM1, PM2).
U.L. and CSA listed for wet locations, the Vision
J-Box is supplied with a 3/4" clearance hole on the
top surface and two (2) 3/4" NPT openings on the
bottom surface. An optional drilling consisting of
one (1) 1/2" NPT opening on the bottom surface
can be specified.
Die-cast aluminum slipfitter features a 3/4" NPT
entry point on top surface to mate to standard VFS
knuckle. Allows fixture assembly to be mounted to
standard 2" pipe size (2 3/8" O.D.) tenons and tenon
equipped accessories.
3/4" [20 mm] Dia.
5/16" [8 mm] Dia.
15" [381 mm]
24" [610 mm]
18"
[457 mm]
6 1/2"
[165 mm] Sq.
3/4" [20 mm] Dia.
5/16" [8 mm]
Dia.
3/4" [20 mm] Dia.
190°
190°
190°
6" [152 mm]
Sq. Bolt Pattern
STANCHION MOUNT [SM]
TWIN ARM MOUNT [TMA]
WALL MOUNT ARM [WMA]
Used to mount fixture above grade to solid surface,
or partially buried when secured to concrete pad.
Cast aluminum housing and mounting plate is 18"
tall and is supplied with a single 3/4" clearance
hole entry point.
Soft form extruded aluminum arm is 24" in length
and features two (2) 3/4" clearance holes for twin
fixture mount. Other lengths and drilling patterns
available upon request. Twin arm base slip fits over
standard 2" pipe size (2 3/8" O.D.) tenon. End caps
are removable for wiring access. Useful in ground
mount and pole mount applications.
Extruded aluminum arm with cast mounting plate is
15" in length and is supplied with a 3/4" clearance
hole entry point. Also useful as an arm extension
off square area light poles.
6"
[152mm]
Diameter
5"
[127 mm]
190°
190°
4" [102 mm]
WALL MOUNT [WM]
POST MOUNT EXTENSION [PM1/PM2]
Cast aluminum assembly slip fits over standard 2"
pipe size (2 3/8" O.D.) tenons, and allows for single
(PM1), or double (PM2) mount configurations.
Assembly allows for 360° of fixture rotation.
Top cap provides splice access. Useful for single or
twin, pole mounted downward aiming applications.
Cast aluminum mounting plate adapts around
4" square or octagonal J-box by others. Additional
stud mounting is required beyond J-box
attachment. Consists of mounting bracket and
cast aluminum splice access cover providing a
clean transition to the wall surface. Hanger
mount integral to mounting plate allows for
ease of installation.
19
VISION FLOOD Architectural Flood Luminaire
Download from Www.Somanuals.com. All Manuals Search And Download.
VFS|VFM MOUNTING OPTIONS + SPECIFICATIONS
- Specifications + Dimensions [Slipfitter Mount]
5/16" Dia.
[8 mm]
4"
[102 mm]
190°
6 1/2"
[166 mm] Sq.
5" [127 mm]
When coupled with the available slipfitter (SF), the
VFS can be mounted to the following accessories:
Surface Mount Tenon (SMT), Stanchion Mount
Tenon (ST), Twin Mount Arm Tenon (TMT), and Wall
Mount Arm Tenon (WMT).
The VFM lower knuckle slip-fits over a standard 2"
pipe size (2 3/8" O.D.) tenon. VFM can be mounted
to the following accessories: Surface Mount Tenon
(SMT), Stanchion Mount Tenon (ST), Twin Mount
Arm Tenon (TMT), and Wall Mount Arm Tenon
(WMT).
SURFACE MOUNT TENON [SMT]
For above-grade surface mount placement, the
SMT is supplied with a 4" tall standard 2" pipe size
(2 3/8" O.D.) tenon.
2 3/8" [60 mm]
4" [102mm]
4"
24" [610 mm]
[102 mm]
4"
[102 mm]
18"
[457 mm]
15"
[381 mm]
5/16"
[8 mm]
Dia.
3/4" [20 mm] Dia.
5"
[127 mm]
Sq. Bolt Pattern
190°
190°
190°
6" [152 mm]
Sq. Bolt Pattern
STANCHION MOUNT TENON [ST]
Used to mount fixture above grade to solid surface,
or partially buried when secured to concrete pad.
Cast aluminum housing and mounting plate is 18"
tall and is supplied with a standard 2" pipe size
(2 3/8" O.D.) tenon.
TWIN ARM MOUNT TENON [TMT]
Soft form extruded aluminum arm is 24" in length
and features two (2) standard 2" pipe size (2 3/8"
O.D.) tenons for twin fixture mount. Other lengths
and drilling patterns available upon request. Twin
arm base slip fits over standard 2" pipe size (2 3/8"
O.D.) tenon. End caps are removable for wiring
access. Useful in ground mount and pole mount
applications. For extended downward aiming, utilize
PM1 or PM2 in conjunction with TMT.
WALL MOUNT ARM TENON [WMT]
Extruded aluminum arm with cast mounting plate
is 15" in length and is supplied with a standard 2"
pipe size (2 3/8" O.D.) tenon. Also useful as an arm
extension off square area light pole.
20
VISION FLOOD Architectural Flood Luminaire
Download from Www.Somanuals.com. All Manuals Search And Download.
OPTIONS + ACCESSORIES SPECIFICATIONS
- Specifications + Dimensions
EXTERNAL GRID LOUVERS
TOP VISOR
4-SIDED SHIELD
Designed to control lamp glare and spill light while
maintaining beam efficiency. Useful when aiming
direction or intended target lies in close proximity
to pedestrian and/or motor vehicle activity. Mounts
to accessory channel in doorframe. Finished in black
powder coat paint. Compatible with all
Controls excess spill and glare on top portion of
distribution. Especially useful in uplighting
applications to limit light travel above intended
wall surface or sign. Mounts to accessory channel
in doorframe. Compatible with all distributions.
Controls lamp glare and spill light in all directions.
Useful when aiming direction or intended target
lies in close proximity to pedestrian and/or motor
vehicle activity. Mounts to accessory channel in
doorframe. Compatible with all distributions.
Available on VFM only.
distributions. Available on VFM only.
Button-Style
Photocontrol
BARN DOORS
VANDAL SHIELD
PHOTOCELL CONTROL
Four (4) independently mounted and adjustable
doors control cutoff angles in all directions,
allowing custom distribution control for any
application. Compatible with all distributions.
3/16" thick molded polycarbonate convex lens.
Treated with UV inhibitor to discourage the gradual
discoloration that results from exposure to sunlight
and metal halide lamps.
Internal button-style photocell with sensor located
on backside of housing.
21
VISION FLOOD Architectural Flood Luminaire
Download from Www.Somanuals.com. All Manuals Search And Download.
ORDERING INFORMATION
Sample Number: VFM-K-400-MH-MT-MF-GM-L
Product Family
VFS=Vision Flood
Small
Lamp
Voltage4
Colors
Options (add as suffix)
Accessories
1
6
Wattage
50=50W
70=70W
120=120V
208=208V
240=240V
277=277V
347=347V
480=480V
DT=Dual-Tap
(add as suffix/must specify) F=Single Fuse
(order separately, replace XX with color suffix)
VFS
BK=Black
(120, 277, or 347V) Specify Voltage
VFM=Vision Flood
AP=Grey
FF=Double Fuse
JB-XX=Architectural J-Box
Medium
100=100W
150=150W
175=175W
250=250W
320=320W2
350=350W2
400=400W
750=750W3
1000=1000W3
BZ=Bronze
(208, 240 or 480V) Specify Voltage
SM-XX=Stanchion Mount
7
WH=White
Q=Quartz Restrike
ST-XX=Stanchion Mount Tenon
Mounting
Type
K=Knuckle
DP=Dark Platinum
GM=Graphite Metallic
EM=Quartz Restrike with Delay
(Also Strikes at Cold Start) 7
EM/SC=Quartz Emergency
Separate Circuit 7
PC=Button Type Photocontrol (Specify Voltage)
L=Lamp Included
WM-XX=Wall Mount
WMA-XX=Wall Mount Arm
wired 277V5
WMT-XX=Wall Mount Arm Tenon Mount
TMA-XX=Twin Mount Arm—EPA 0.35
TMT-XX=Twin Mount Arm Tenon Mount—EPA 0.42
SF-XX=Slipfitter
MT=Multi-Tap
wired 277V5
TT=Triple-Tap
wired 347V5
PM1-XX=Post Mount Extension Single—EPA 0.12
PM2-XX=Post Mount Extension Double—EPA 0.12
SMT-XX=Surface Mount Tenon
VFS-BD-XX=Barn Doors—EPA 1.01
VFS-TV-XX=Top Visor—EPA 0.6
VFS-VS=Vandal Shield
VFS-CFR-XX=Color Filter Adapter with Red Gel
VFS-CFB-XX=Color Filter Adapter with Bright Blue Gel
VFS-CFG-XX=Color Filter Adapter with Deep Green Gel
VFS-CFO-XX=Color Filter Adapter with Warm Orange Gel
VFM
SMT-XX=Surface Mount Tenon
ST-XX=Stanchion Mount Tenon
Distribution
Lamp Type
NS=Narrow Spot
NF=Narrow Flood
MF=Medium Flood
WF=Wide Flood
VF=Vertical Flood
HS=Horizontal Spot
MH=Metal Halide
MP=Pulse Start
Metal Halide
HPS=High Pressure
Sodium
NOTE: 1 All lamps are mogul-base on VFM fixtures and medium-base on VFS. 2 320/350W Pulse Start Metal Halide lamps only.
3 Metal Halide only, requires reduced envelope BT or ED37 lamp. 4 Products also available in non-US voltages and 50Hz for
international markets. Consult factory for availability and ordering information. 5 Dual-Tap is 120/277V wired 277V. Multi-Tap is
120/208/240/277V wired 277V. Triple-Tap ballast is 120/277/347V wired 347V. 6 RAL and custom color matches available.
Consult your INVUE Lighting Systems Representative for more information. 7 Quartz options available on VFM only.
TMT-XX=Twin Mount Arm Tenon Mount—EPA 0.42
WMT-XX=Wall Mount Arm Tenon Mount
VFM-BD-XX=Barn Doors
VFM-TV-XX=Top Visor
VFM-4S-XX=4-Sided Shield
VFM-VS=Vandal Shield
DIMENSIONS
Vision Flood Small [VFS]
VFM-GL=External Grid Louvers
Vision Flood Medium [VFM]
VFM-CFR-XX=Color Filter Adapter with Red Gel
VFM-CFB-XX=Color Filter Adapter with Bright Blue Gel
VFM-CFG-XX=Color Filter Adapter with Deep Green Gel
VFM-CFO-XX=Color Filter Adapter with Warm Orange Gel
10"
[254 mm]
16 1/2"
[419 mm]
X
7 1/2"
[191 mm]
X=2 15/16"
[75 mm]
14" [356 mm]
7 11/16"
[196 mm]
23" [584 mm]
11 13/64" [284 mm]
WATTAGE TABLE
SHIPPING DATA
VFS
VFM
VFS
VFM
Metal Halide
50, 70, 100, 175W 175, 250, 400, 1000W
250, 320, 350, 400, 750W
50, 70, 100, 150W 150, 250, 400W
Net. Weight (lbs.)
37
53
Pulse Start Metal Halide
High Pressure Sodium
E.P.A. (lbs.)
1.19
3.24
NOTE: The above are approximate weights.
STANDARD COLORS
BK
Black
AP
Grey
BZ
Bronze
WH
White
DP
GM
Graphite Metallic
Dark Platinum
APPLICATIONS DEPARTMENT
Let the application experts at Cooper Lighting design your next lighting layout. Aided by the latest computer simulation software and a comprehensive lighting background,
our Application Engineers can design, analyze, and provide statistical layouts for any lighting application. Whether the design criteria calls for Illuminance, Luminance, or
Small Target Visibility (STV) compliance, Cooper Lighting can provide the fixture layout and supporting documentation necessary to help secure your next project.
INVUE WEBSITE
Visit invuelighting.com for the latest product information from INVUE Lighting Systems. With instant access to IES photometric files, PDF product specification sheets, new
product announcements, and other helpful specification tools, the INVUE Lighting website is an invaluable resource for getting information to customers-quickly.
22
VISION FLOOD Architectural Flood Luminaire
Download from Www.Somanuals.com. All Manuals Search And Download.
CUSTOMER FIRST CENTER
1121 HIGHWAY 74 SOUTH
PEACHTREE CITY, GEORGIA 30269
770.486.4800
The Cooper Lighting Family
Halo
Portfolio
Metalux
FAX: 770.486.4801
Neo-Ray
Corelite
Lumark
Domestic Facilities, USA
Cranbury, New Jersey
Elk Grove Village, Illinois
Irving, Texas
Ontario, California
Peachtree City, Georgia
INVUE
McGraw-Edison
Streetworks
Sure-Lites
Fail-Safe
Shaper
Iris
International Sales, USA
Lumie` re
Peachtree City, Georgia
MWS
CANADA
Cooper Lighting
5925 McLaughlin Road
Mississauga, Ontario L5R 1B8
905.507.4000
Fax: 905.586.7049
Domestic Facilities, Canada
Calgary, Alberta
Chomedey, Laval P.Q.
Cooper Lighting
All rights reserved
Printed in USA
VISION FLOOD
ARCHITECTURAL FLOOD LUMINAIRE
AVU031495
Download from Www.Somanuals.com. All Manuals Search And Download.
|
Continental Electric Mixer CP43189 User Manual
Cuisinart Coffee Grinder DBM 8 User Manual
Curtis MP3 Player MPK4050 User Manual
Cypress Computer Hardware CY62157ESL User Manual
Eagle Electronics Fish Finder 642c User Manual
Eagle Electronics Grinder EGA530 User Manual
EDGE Tech Pager X PAGE User Manual
Electro Voice Microphone PL80c User Manual
FEIN Power Tools Welder FSC 16 User Manual
GE Air Conditioner ASW18 User Manual