™
NEO-RAY
ORDERING INFORMATION:
Sample number: 201IW-SP-1T5HO-1C-120-SU-WA-24
2-1/2"
[63mm]
S
Series
201IW=Shell II Wall Mount
Optics Up
S=Specular
7-7/8" [200mm]
T8 = 1 Lamp
T5 = 1 or 2 Lamp
Optics Down
P=Perforated
Construction
Housing is one-piece, die-formed, cold rolled steel,
forming a 7-7/8” x 2-3/4” architectural profile.
Perforated sections are 33% with staggered hole
pattern with white acrylic overlay. Standard 4’-0”
and 8’-0” luminaire lengths combine for continuous
runs.
Number of Lamps (not included)
1=1 Lamp 2=2 Lamps (T5 only)
SHELL II
201-IW
Lamp Type
T5HO=54W HO (4’ Unit) T8=32W (4’ Unit) (1 Lamp only)
Number of Circuits 1
1=1 Circuit
2=2 Circuits (Side by Side)
End Caps
Standard end caps are precision die-cast aluminum
mechanically attached without exposed fasteners.
DIRECT-INDIRECT
Wiring
C=Standard Circuit
D=Dimming
E=Emergency/Night Light
B=Battery Pack
Reflectors
• Semi – indirect light
distribution.
Voltage 1
1=120V
Reflector is die-formed, semi- specular anodized
aluminum.
2=277V
3=347V
U=Universal
• T5 and T8 lamping options.
SU-WA=Surface/Wall Mount
• Die formed steel perforated
housings.
Electrical
Luminaires are prewired with quick wire connectors
and use UL list Class P, T5HO or T8 electronic
ballasts. Power factor of 97% with less than 10%
THD. Fixtures and electrical components certified to
UL and CUL standards.
Run Length
Individual or continuous runs will be configured with 4’ and 8’
sections only (see sample catalog #)
• Modular housing lengths –
4’and 8’ for individual or
continuous runs.
1 Due to various constraints, some options may not be combined with others.
• Precision die cast end caps.
Finish
• Adjustable mounting block
for accurate leveling.
Luminaire housings are standard white using
electrostatically applied acrylic powder coat paint.
Mounting
Fixture mounts directly to existing structure over a
2” x 4” standard electrical box mounted
horizontally in the wall.
= Slim Line Ballast only.
S
STANDARD LUMINAIRE LENGTHS*
48"[1219mm]*
96"[2438mm]*
*Dimensions do not include end caps.
END CAP
2-1/2"
[64mm]
7-1/8" [181mm]
1-1/4"
[38mm]
NOTES: For complete product data, refer to the Neo-Ray Specification Binder. Specifications and dimensions subject to change without notice. Products may be
modified for use in international markets. Please contact your Cooper Lighting Sales Representative for availability and ordering information.
738 COOPER LIGHTING
Download from Www.Somanuals.com. All Manuals Search And Download.
|