WELCOME TO
USER MANUAL
Download from Www.Somanuals.com. All Manuals Search And Download.
Wear Your VholdR
Congratulations and welcome to the VholdR
Community. We are committed to creating the
easiest way to shoot and share action video.
Download from Www.Somanuals.com. All Manuals Search And Download.
CONTENTS:
What’s in the Box:
What’s in the Box:
Part One: Getting to know your VholdR Camera
MicroSD Card & Battery
Charging the Battery
Powering Up
5
6
a
b
c
d
e
f
VholdR Camera
MicroSD Card
Software (on MicroSD card)
USB Cable
8
9
10
11
12
12
14
15
16
17
18
20
20
21
26
VholdR Camera Status
Part Two: Mount, Align, and Record
Mount
Battery
Helmet Mount w/ Leash
Manual
g
Align
Record Video
a
Part Three: VholdR Software
Macintosh
Install Software and Register
Tips & Toubleshooting
Contact Support
g
e
d
f
Troubleshooting Topics
Warranty
b, c
4
5
Contents
What’s in the box
Download from Www.Somanuals.com. All Manuals Search And Download.
Part One: Getting to know your VholdR Camera
You probably want to get started using your VholdR right
away, so we’ll try and get you up and running quickly.
Follow along as we help you record your first VholdR
video, right out of the box.
serial number
charging indicator
power indicator
record switch
battery slot
192º rotating lens
power button
stop
rear door
record
USB
microSD
card slot
TRail™ mounting system
memory indicator
dual alignment lasers
6
7
Getting to know your VholdR Camera
Getting to know your VholdR Camera
Download from Www.Somanuals.com. All Manuals Search And Download.
MicroSD Card & Battery
Charging the Battery
1
To open VholdR’s back door, place your thumb at the
bottom of the door and gently push upwards.
Your VholdR battery will have some juice out of the box, but we recommend a fresh
charge before recording your first adventure. VholdR is designed to charge directly from
your computer via the included USB cable.
USB connection
charging indicator
2
3
Your MicroSD memory card is already in place. press on
the card until you hear a gentle click and the top of the
card has ejected.
Note: VholdR only supports up to a 2GB MicroSD card
(non-HC format)
1
2
Open VholdR’s back door and connect the USB cable.
To insert the battery, align the plus sign (+) on the
camera with the plus sign (+) on the battery and insert
the gold contacts first. Hold the battery tab away from
the opening to allow enough space for the battery to
slide into place. Slide the tab over the top of the battery
and ensure it is resting in one of the grooves on top of
the battery.
Connect the other end of the USB cable to your computer.
USB input: 5V 500mA
Note: The VholdR will charge fastest while not powered on.
3
4
5
VholdR’s charging indicator light (located inside the back door) will be red when the bat-
tery is charging.
Note: It is important that the battery clip is firmly engaged to
secure the battery in place.
The battery indicator light will turn green once the VholdR is full charged provided the
VholdR is powered off while charging. The battery will take about 4 hours to full charge.
4
Close the back door by aligning it slightly above the
body of the camera and then sliding downward until it
locks into place.
Your VholdR uses a rechargeable Lithium-Ion, 3.7V, 900mAh battery. Do not use batteries
other than those specifically designed for the VholdR. Use of any other battery may
present a risk of fire or explosion.
8
9
MicroSD Card & Battery
Charging the Battery
Download from Www.Somanuals.com. All Manuals Search And Download.
Powering Up
VholdR Camera Status
Before you power up, make sure your VholdR is in the
‘Stop’ position by sliding the top record switch all the
way back against the rear door.
You can check the status of your VholdR camera by pressing and holding the power
button for one second after the camera has finished booting.
Note: Do not toggle the record switch or connect to a
computer until the unit is fully booted. (Approximately 15
seconds).
rear
front
press and hold
for (1) second
b
Press and hold the power button until the status lights
on the back light up, then release.
press and hold
until lights
come on
a
The front red power light will turn on.
Battery Status
b
The rear two lights will stay amber for about 10
seconds.
b
Green light
Yellow light
Red light
More than 66% full
Between 33% and 66% full
Less than 33% - time to recharge
Recharge your VholdR or power up again
c
Next, the lens lasers will turn on for about five
seconds as the back two indicator lights turn off.
No lights
Memory card status
Green light
Yellow light
Red light
CAUTION: DO NOT stare directly into the laser beams.
More than 66% free recording space
Between 33% and 66% free recording space
Less than 33% - time to swap out cards or download
Your memory card is full, you are missing a card, or
your card has an error and needs to be formatted
(see Tips & Troubleshooting to format your MicroSD Card)
Press and hold rear button for 3 seconds or until all
lights turn off
d
Finally, the lasers will turn off and you will hear a
beep.
c
Flashing Red
e
f
The VholdR is now fully booted and ready to record.
Power off
The red power light will remain on to indicate the
VholdR is on and ready to go.
a, f
10
11
Powering Up
VholdR Camera Status
Download from Www.Somanuals.com. All Manuals Search And Download.
Part Two: Mount, Align, and Record
Mount
Loop the leash through either of the two holes on the back of VholdR before attaching
the VholdR to the mount.
4
5
6
Mounting, Aligning, and Recording great action video out of the box is
an important part of the VholdR experience. The following explains how
to record video from your point of view successfully on the first try.
Slide your camera onto the rails of the mount with the two notches on the mount facing
towards the back of the camera.
Mount
To adjust the vertical position of your mount you can detach the rails from the base of
the mount. Simply hold down the base and pull the VholdR away from the mount until
the Velcro detaches. For best results and longevity it is best to not pull straight but to
apply pressure out from the rear half.
1
Your standing position and riding positions are different. When going down hill your
head is lower than you think and when traveling uphill your camera can be filming
the sky. Therefore, first get into a true riding position.
2
3
Select your preferred mounting location on your helmet.
Note: The top of the helmet provides the most centered view.
after detaching, rotate
vertically to align and then
reattach firmly into mount
Find a flat or slightly curved surface. Clean off the surface with alcohol or a damp
cloth and let dry. Remove the cover on the adhesive pad and then adhere the base
to your surface.
hold base of
mount firmly
against
Note: Press firmly and for best results let sit overnight to cure.
attach and adjust camera according to your riding position
(it’s no fun watching videos of the ground)
surface as
you pull
camera
away
from
velcro
attach leash
before using
12
13
Mount, Align, and Record
Mount
Download from Www.Somanuals.com. All Manuals Search And Download.
Align
Record Video
Now let’s align your VholdR. Remember, there is no screen so the lasers
are designed to give you a visual level of what you will be shooting.
When sliding the switch all the way forwards or backwards you will feel a
slight click to indicate the switch is in the final position.
rotate lens to align
lasers horizontally
stop
record
press and hold
for (1) second
aim lasers
•
•
Start Recording: Slide the record switch forward towards the lens.
Indicator: you will hear (1) beep. The red power light (in front) will blink.
Stop Recording: Slide the record switch back against the rear door.
Indicator: you will hear two beeps. The red power light (in front) will stop blinking.
Assume the riding position. Then press and hold the power button for one second until
the lasers turn on. Lasers will show for 5 seconds.
1
2
CAUTION: Avoid staring directly into the laser beams.
Note: Slide the switch all the way forward and backwards until you feel a slight click to indicate the switch
is in its final position. Be patient with hearing the beeps, but if you do not hear the proper beeps please
see Tips and Troubleshooting.
Aim the two laser points at your hand, a wall, or object in front of you. Rotate the FRONT
of the VholdR lens and/or adjust the mount until the lasers are aligned
HORIZONTALLY. This ensures the horizon is correctly aligned.
Note: There is a limit of just over 90 degrees in either direction so if you reach that point try rotating the
lens in the opposite direction or adjust the mounting position.
14
15
Align
Record Video
Download from Www.Somanuals.com. All Manuals Search And Download.
Part Three: VholdR Software
Macintosh
The VholdR camera supports both PC and Mac, but the
VholdR Desktop software is only PC compatible at this time.
We love Macintosh and many of us at VholdR are lifetime Mac users,
but we’re still working on VholdR Desktop for Mac so please be patient
with us while we work on developing Mac software. To check our
In the meantime, the following directions are written just for you.
Minimum PC Requirements:
Operating Systems: XP & Vista
Language: English
Browsers: IE 6.0, 7.0 & Firefox 1.0, 2.0, 3.0
Windows Media Player 10
Microsoft Dot Net 3.0
1
2
Connect VholdR - When you connect VholdR, a new drive should appear on your
desktop. It should appear as ‘untitled’ if you did not previously format your card with
a name. Double click on the icon to open up the file menu of your VholdR. Drag the
video clips to your desktop or new folder.
Note: In order to properly install and activate your VholdR Desktop, your account
needs to have ‘System Administrator’ privileges.
Xvid Codec - In order to play your VholdR videos you will need an Xvid compatible
player (QuickTime does not play native Xvid files) or to convert the VholdR videos to
a QuickTime compatible file type.
Windows XP:
Click the ‘Start’ button.
Select ‘Control Panel’.
1
2
3
4
Open ‘User Accounts’.
Your login account should be labeled “Computer administrator”.
Windows Vista:
1
2
3
4
5
6
Click the ‘Start Menu’.
Select ‘Control Panel’.
Open ‘User Accounts’.
Your login account should be labeled ‘Administrator’.
Select ‘Turn User Account Control on or off’.
Uncheck the ‘Use User Account Control (UAC) to help protect your
computer’ checkbox and select OK.
You will need to restart your computer.
3
To play a video with the VLC player, right click on video file and select the VLC
player.
Sharing to VholdR.com - We would love to see your videos on VholdR.com so go to
7
16
17
VholdR Software
Macintosh
Download from Www.Somanuals.com. All Manuals Search And Download.
Install Software and Register
Community
VholdR Desktop is designed to simplify your video experience so you can
share your videos with a single click. The installer for the VholdR Desktop
is on the MicroSD card shipped with your VholdR.
Now that you have shared your videos to VholdR.com,
how do you view your videos online?
The MicroSD card should already be in your camera. Power up your VholdR. (see
Powering Up)
1
1
2
3
Sign in with your VholdR login.
Edit your profile; add a photo and user information.
If you haven’t already, enhance your video clips with a title, tags, location, and
a description.
Connect your VholdR to your computer via the USB cable.
2
3
4
This allows your content to be searchable and viewable to other VholdR enthusiast.
AutoPlay options will appear. To install VholdR Desktop, select the Install.HTML file
and then select ‘Download VholdR Desktop’ to begin the download. You will need an
internet connection to begin the download process (we have chosen this process so you
only receive the latest of VholdR Desktop).
How to Share your videos
Email your link to friends and family.
Embed the video into your site.
Store with social bookmarking sites: Digg, Del.icio.us, Reddit, StumbleUpon,
Technorati, Newsvine.
•
•
•
Note: If AutoPlay does not launch, go to My Computer, right click on the <Drive letter> VholdR camera
and choose Open AutoPlay.
4
5
To Launch VholdR Desktop after completing the installation, select the shortcut icon on
your desktop or select Start, All Programs, and then VholdR Desktop.
Watch other Videos! Mark your favorites!
Interact with other enthusiasts!
VholdR Desktop will prompt you to register.
Note: THIS IS A CRITICAL REQUIREMENT TO SHARING VIDEOS.
6
7
Register by creating a user name and password. This will enable you to share your
videos at VholdR.com.
During the registration you will be asked for a serial number, this can be found inside the
rear door of VholdR Desktop above the USB port.
Note: If you reformat the MicroSD card, the installer will not be available on the MicroSD card.
18
19
Install Software and Register
Community
Download from Www.Somanuals.com. All Manuals Search And Download.
Tips & Troubleshooting
Tips & Troubleshooting
Battery Will Not Fit
The following troubleshooting guide is to help you solve any issues you
come across with VholdR. We have provided simple steps for the top
customer issues that you might face. If you are unable to resolve an issue
with the guide below, please contact VholdR Support. We are happy to
work with you and are here to support your VholdR adventures.
Steps
1
2
To insert the battery, align the plus sign (+) on the camera with the plus sign (+) on the bat-
tery and insert the gold contacts first.
Hold the battery tab away from the opening to allow enough space for the battery to slide
into place. Slide the tab over the top of the battery and ensure it is resting in one of the
grooves on top of the battery.
3
The battery and camera were made to have a very tight fit to keep the connection as solid as
possible which keeps the VholdR from accidentally powering off when in action. Move the
battery from side to side until it slides into place.
Support Hours: Monday - Friday, 9:00am to 6:00pm PST
866.397.6920 (USA)
support@vholdr.com
206.792.5226 (International)
VholdR Does Not Appear to Hold a Charge
Steps
1
2
Make sure the camera is completely off when charging via the USB cable; the battery takes
approximately 4 hours for a full charge.
Note: Charging while the camera is on will take twice as long. The battery status light will not turn green
when the camera is powered on while charging.
accessories/overview)
3
4
Remove the battery and make sure the gold connectors are not dirty or damaged.
Reinsert the battery making sure that the gold connectors are aligned with the plus sign (+)
and that this side is inserted into the camera first.
20
21
Tips & Troubleshooting
Tips & Troubleshooting
Download from Www.Somanuals.com. All Manuals Search And Download.
Tips & Troubleshooting
Tips & Troubleshooting
5
6
Engage ensuring the clip securely over the top of the battery so that the battery is snuggly
seated in the battery slot.
VholdR to the computer. If you connect before the boot is complete, windows will give you
an ‘Unrecognized USB Device’ error.
Ensure the mini-USB cable is securely connected to the VholdR and the USB connector is
securely connected to a USB port on the computer which is capable of providing sufficient
current for charging.
2
Ensure the record switch is in the off position when connecting to the computer. If the record
switch is in the recording position when connected to the computer, the computer may
prompt you to download drivers for unrecognized hardware.
3
4
Remove and reinsert battery to reset the VholdR.
Power Button Not Functioning
MicroSD card may not be properly inserted in the SD slot. It may be positioned between the
slot and housing. Remove the MicroSD card, confirm the contacts are not dirty or damaged,
and carefully reinsert into the SD slot.
Steps
1
2
3
Press down firmly until the indicator lights blink to indicate the VholdR is booting.
Ensure the back door is properly closed and secure when turning the VholdR on or off.
Remove and reinsert the battery to reset the VholdR.
5
MicroSD card may be corrupted and may need to be reformatting. Refer to Tips and
Troubleshooting for complete directions.
VholdR Camera Not Recording
Excessive Wind Noise While Recording
Steps
Steps
1
2
3
Do not remove the MicroSD card while the camera is recording.
1
2
Wind is an issue when recording action video so cover the microphone with tape or foam.
(see ‘Getting to Know Your VholdR’)
Do not remove the MicroSD card while the camera is on.
Adjusting the angle at which the camera is recording so that the microphone falls more into
the slipstream and not directly in the path of the wind.
Do not remove the MicroSD card while the camera is booting. (wait for the beep,
not the lights)
Computer Not Recognizing Camera
4
Make sure while booting the camera with record switch in the stop position.
Note: How to tell if you’ve accidently done one of the above. When you’ve connect your VholdR to the
computer and you find that it recognizes the device, but it doesn’t show a drive letter, then you need
reformat your card.
Steps
1
After ‘Powering Up’ the VholdR, wait for the boot process to complete then connect the
22
23
Tips & Troubleshooting
Tips & Troubleshooting
Download from Www.Somanuals.com. All Manuals Search And Download.
Tips & Troubleshooting
Tips & Troubleshooting
Formatting your MicroSD card
Video Failed to Upload to VholdR.com
Steps
Steps
1
2
3
4
Insert MicroSD card into a MicroSD card reader/adapter and plug into the computer directly.
Plug your VholdR into the computer.
After you’ve created a back up of your content, right click on drive letter and select format.
Format settings:
Check the size of your video file. The largest file type we accept is 100MB.
1
2
Uploading a large video clip via a wireless connection has a higher probability of interruption
and may cause the upload to fail.
a
b
c
d
e
f
Capacity: Use default
File System: FAT32
Allocation unit size: Default allocation size
Volume Label: VholdR
Format options: Quick Format
Select Start.
3
4
Once you upload a video, it will take 15 to 30 minutes to render/process your video before it
is viewable on the site.
If it has been longer than 30 minutes and your video still indicates ‘Processing’ on VholdR.
com, it could be that it did not upload successfully. This may be due to some sort of timeout
between your computer and our server. Try uploading the video again.
g
Warning appears, select OK.
Slow or Choppy Playback of Video
Difficulty Playing Video on a Mac
Steps
Steps
1
2
Make sure VholdR Desktop has been fully installed and if FFDshow appears, you should
check the box to always use it with Xvid codec videos.
Read the previous section above titled ‘Macintosh’.
1
2
View our latest support of Mac (http://www.vholdr.com/mac).
The video should be viewed after it has been downloaded from the camera to the computer.
Do not play videos right off the VholdR; otherwise it will be slow and choppy.
When recording a video, make sure the camera is finished booting before recording.
3
4
5
Ensure the record switch is fully engaged when starting a recording.
Ensure the record switch is off when stopping a recording.
When installing the battery, ensure the battery clip is securely holding the battery in place.
24
25
Tips & Troubleshooting
Tips & Troubleshooting
Download from Www.Somanuals.com. All Manuals Search And Download.
Warranty
Warranty
TWENTY20, INC. LIMITED WARRANTY
WHAT THE WARRANTY COVERS
HOW YOU CAN GET SERVICE AND WHAT TWENTY20 WILL DO:
within 180 days from the date you purchased this product. If service is required, you may be
instructed to deliver the product freight prepaid, in either its original packaging or packaging
affording an equal degree of protection, to the company address below and provide proof
of purchase in the form of a bill of sale or receipt which evidences that the unit is within the
warranty period.
Twenty20, Inc. (“Twenty20”) warrants for 180 days from the date of purchase of product it
will be free from defects in material and workmanship.
WHAT IT DOES NOT COVER
This warranty does not cover damage due to:
1
2
Accidents of any kind.
Twenty20 will, at its sole discretion, replace or repair the product. Please do not return the
product to Twenty20 unless specifically instructed to do so.
Exposure to pressure, extreme temperatures (outside of -20°C to 45°C), and submersion
in water. This product is water resistant but not waterproof, shock resistant but not shock
proof, and its performance can be hindered by extreme temperatures.
Installation and operation contrary to the instructions which come with the product, including
misuse, abuse, and negligence.
Twenty20 Customer Information Services Center
Phone number: (866)397.6920
Email: [email protected]
3
4
5
Cosmetic damage.
Modification of or to any part of the product.
YOUR RIGHTS UNDER STATE LAW:
This warranty does not cover any product for which the factory applied serial number has
been altered or removed or any damage due to improper maintenance. This warranty is valid
in any countries Twenty20 sells the product or is legally represented.
Some states do not allow the exclusion or limitation of incidental or consequential damages,
or allow limitations on how long an implied warranty lasts, so the above limitations or exclu-
sions may not apply to you. This warranty gives you specific legal rights, and you may have
other rights which vary from state to state.
EXCEPT TO THE EXTENT PROHIBITED BY APPLICABLE LAW, ANY IMPLIED WAR-
RANTY OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE ON
THIS PRODUCT IS LIMITED IN DURATION TO THE DURATION OF THIS WARRANTY.
REPAIR OR REPLACEMENT AS PROVIDED UNDER THIS WARRANTY IS THE EXCLU-
SIVE REMEDY OF THE CONSUMER, TWENTY20 SHALL NOT BE LIABLE FOR ANY
INDIRECT, INCIDENTAL OR CONSEQUENTIAL DAMAGES OF ANY KIND CAUSED BY
BREACH OF ANY EXPRESS OR IMPLIED WARRANTY ON THIS PRODUCT.
26
27
Warranty
Warranty
Download from Www.Somanuals.com. All Manuals Search And Download.
Warranty
Battery Handling
Twenty20 Disclaimer
The lithium-ion battery may present a hazard if mistreated. Do not disassemble, crush, or
puncture the lithium-ion battery. Do not immerse battery in water and store in a cool dry
place when not in use. Do not use or leave battery near a heat source or in direct sunlight.
All purchasers, users, and any or all parties involved or engaging in the use of Twenty20, Inc
(“Twenty20”) products agree to the following:
•
•
•
•
•
•
Twenty20 does not promote or endorse careless and or dangerous actions when using its
products.
Twenty20 is not liable for any use or misuse of Twenty20 Products in applications other than
those for which it was designed.
Twenty20 does not take any responsibility in relation to the use of our products or any video
captured that may be considered illegal.
Twenty20 is not responsible for any illegal actions taken while recording, attempting to
record, or editing video that was captured with our products.
Twenty20 products primary purpose is for recording legal action sports activities as seen by
all Local, State, Federal, and Country laws.
Do not dispose of either the VholdR or lithium-ion battery in a fire. Dispose of batteries in
accordance with local laws and regulations.
Use only the lithium-ion battery specified for use in the VholdR. Using any other lithium-ion
battery may invalidate the warranty provided by Twenty20, Inc. and may present a risk of fire
or explosion.
Twenty20 is indemnified from consequential or indirect loss, damage, injury, or death
resulting from the use of Twenty20 products.
All trademarks and registered trademarks mentioned herein are recognized as the property of
their respective holders.
©2008 Twenty20 Corporation. All rights reserved.
28
29
Warranty
Warranty
Download from Www.Somanuals.com. All Manuals Search And Download.
User Manual FCC Information
VholdR
Model: 1102
FCCID: J61250712V1100
Warning: Changes or modification to this unit not expressly approved by party responsible
for compliance could void the user’s authority to operate the equipment.
Note: This equipment has been tested and found to comply with the limits for a Class B
digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide
reasonable protection against harmful interference in a residential installation. This equip-
ment generates, uses and can radiate radio frequency energy and, if not installed and used in
accordance with the instructions, may cause harmful interference to radio communications.
However, there is no guarantee that interference will not occur in particular installation. If
this equipment does cause harmful interference to radio or television reception, which can be
determined by turning the equipment off and on, the user is encouraged to try to correct the
interference by one of more of the following measures:
• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
• Connect the equipment into an outlet on a circuit different from that to which the receiver is
connected.
• Consult the dealer or an experienced radio/TV technician for help.
This device complies with Part 15 of the FCC Rules. Operation is subject to the following
two conditions: (1) This device may not cause harmful interference, and (2) This device must
accept any interference received, including interference that may cause undesired operation.
30
Warranty
Download from Www.Somanuals.com. All Manuals Search And Download.
|