Compaq Projector iP 60E User Manual

A Proposal for New

Presentations

Intelligent Projector

User’s Manual

iP-60E

Partner Business Department, Manufacturing Equipment & Information Products Sales Division

NIPPON AVIONICS CO., LTD.

Gotanda Kowa Bldg., 1-5, Nishi-Gotanda 8-chome, Shinagawa-ku, Tokyo Japan

Zip code: 141-0031

Tel: +81-3-5436-0625 Fax: +81-3-5436-0639

Customer Support Center, Solution Products Division

1-1 KOYATO 2-CHOME SAMUKAWA-MACHI

KOZA-GUN KANAGAWA, JAPAN

Zip code: 253-0103

Tel: +81-467-73-4426

E-mail:[email protected]

URL: http://www.avio.co.jp

To customers : Enter the name and date of the store where you purchased this prod-

uct. This information will be useful when you ask your dealer for repair.

Information on the included manuals

These manuals have been prepared to allow you to take full advantages of the set’s

• Date of Purchase

• Store of Purchase

(year, month, day)

functions.

Select the manual suited to your purpose.

⦁ iP-60E manual (this manual)

Includes information on the operation and handling of the projector.

⦁ iP Viewer Software Quick Reference

Includes a concise description of handling of the “iP Viewer” presentation software.

Telephone Number :

(

)

⦁ iP Viewer Software Manual (PDF format)

Includes more detailed instructions than the Quick Reference. Select according to

your purpose.

7000547-R01C



Download from Www.Somanuals.com. All Manuals Search And Download.

A Proposal for New

Presentations

Intelligent Projector

User’s Manual

iP-60E

English

Download from Www.Somanuals.com. All Manuals Search And Download.

Thank you for your purchase of an AVIO product.

Please read this manual carefully in order to use the projector properly.

After reading this, please keep it in a safe place together with the warranty sheet.

Features of the iP-60E

• Very versatile ﬁve-in-one projector. A projector for the multimedia age.

1. Projection of documents, catalogs, and other printed materials. Printed materials can be projected directly without the

creation of OHP ﬁlm.

2. Projection of personal computer screen images

Detailed presentations can be made using a personal computer.

3. The video images of video tape decks, DVDs and other equipment can be projected. This permits the creation of pre-

sentations that are visually appealing.

4. Projection images can be imported to a personal computer connected via USB.

5. An image that has been scanned to a personal computer can be written on as one pleases using a tablet or another de-

vice and while doing so the image can be projected.

• Easily understood, simple operation for everyone

One button operation simply switches the projection of printed material, personal computer screen, and video image.

• Designed for a conservation of resources which offers excellent cost performance

The creation of OHP ﬁlm is not required. This allows a reduction of wasteful time and costs.

• Super-thin, stylish body

The iP-60E features a super-thin body for a projector having a built-in OHP function which reﬂects the advanced technology

inherent in the design. Offers an easy ﬁt when in use or when stored.

• Expressive color pictures

High-resolution, single-board CCD camera is built in. It provides faithful and clear reproduction of the detailed neutral tones

of color documents with its full-color 16.77 million colors.

• Enlarged display without changing the screen size

When projecting documents having small characters that were not created for presentations, such as catalogs and word-

processed documents, the iP-60E can enlarge the document without changing the screen size to provide an easy-to-view

display.

• Provided with display functions for compressed or enlarged PC screen

Screens of resolution more than 1024

768 dots are displayed compressed to 1024

768 dots without any loss in char-



acter quality. Such as 640

480 resolution screens can also be enlarged to 1024

768 dots.



About Trademarks

IBM and PC/AT are trademarks or registered trademarks of International Business

Machines Corporation.

Macintosh and Power Book are trademarks of Apple Computer Inc.

Windows is a trademark of U.S. Microsoft Corporation.

Warnings and Safety Precautions

Warning Symbols

To alert the user to important safety precautions, the following symbols are used

in this manual and on the product. Make sure you understand what these sym-

bols mean before operating the projector.

WARNING

CAUTION

NOTE

Death or serious injury may result if this warning is ignored.

Injury or damage to the equipment may result if this warning is ignored.

This indicates an item that you should take care of when handling your projector.

This symbol alerts the user to high voltage that could cause electric shock.

E-ꢀ

Download from Www.Somanuals.com. All Manuals Search And Download.

Safety Precautions

WARNING

If a fault occurs:

●

• If you detect smoke, or a strange smell or sound, immediately disconnect the power cable.

It is dangerous to continue using the projector after a fault occurs. Return the projector to the dealer where it was pur-

chased for repair.

Avoid placing the projector near dangerous substances.

●

• Make sure that no metallic or ﬂammable material can get into the projector through the air vents.

• Do not place any objects containing water on top of or next to the projector.

If foreign matter gets inside the projector:

• If foreign matter such as water or metal gets inside, immediately disconnect the power cable.

It is dangerous to continue using the projector when foreign matter gets inside. Return the projector to the dealer where it

was purchased for servicing.

Do not remove the cabinet.

●

• Do not remove the cabinet. There are high-voltage components inside and touching these parts could cause electric

shock, or damage the equipment.

Handle the power cable safely.

• Do not place any heavy objects on top of the power cable.

Damage to the power cable can cause wire breakage, ﬁre, or electric shock.

• Do not pull the power cable when disconnecting the power plug.

Pulling the cable may break the wires or cause ﬁre or electric shock. Always hold the plug itself when pulling it out of the

power outlet.

• Do not damage the power cable. If the power cable is damaged (e.g. the core is exposed or cut), contact the sales ofﬁce

of purchase. (charged) it could cause ﬁre or electric shock if you continue using the damaged power cable.

• Do not peep into the lens.

• Do not peep into the lens of the projector during operation. The powerful rays passing through the lens could damage the

eyes.

• Do not put the projector in unstable places.

• Do not put the projector in unstable places such as on unstable desks or slopes.

Doing so could cause the projector to drop or turn over, resulting in injury.

• Do not use any voltages other than speciﬁed.

• Do not use any voltages other than speciﬁed. Doing so could cause ﬁre or electric shock.

• Do not beat the glass surface

• Do not beat the glass surface over the scanner. Doing so may break the glass, resulting in injury.

• Do not touch the air vents or lamp cover

• The air vents, lamp cover, and peripheral surfaces may be high temperature during operation or just after the light is

turned off.

Do not touch those for a long time.

• Do not block the lens front

• Do not block the lens front during operation.

The powerful rays passing through the lens may cause ﬁre or burns if you put anything in front of the lens or block the

lens with your hand during operation.

Warning

Please check the rating of the power cable.

Prior to using a power cable, please make sure that the cable is fully compliant with the power ratings and the type of the plug in

the area and, if not, purchase proper power cable for the area. Do not use the cables for 120V rating to 220V power source.

Using improper cable may cause ﬁre or electrical shock to human body.

E-ꢁ

Download from Www.Somanuals.com. All Manuals Search And Download.

Safety Precautions

CAUTION

• Installation

• Avoid installing the projector in places where it may be exposed to:

- Strong vibrations

- Soot or steam

- Direct sunlight or near a heater (35°C/95°F or higher)

- High humidity or dust

- Extreme cold (0°C/32°F or lower)

- Strong magnetic or electric ﬁeld generated from a nearby appliance

- Wobbling on an unstable surface

• Do not block the air vents.

• Do not block the air vents with cloth or an object.

When you put anything around the unit, be sure to ensure a space of 10 cm/4 inches or more between the unit and the

air vent. Be sure to prevent paper or cloth from blocking the air vent at the bottom of the unit. If blocked, the internal tem-

perature may increase, resulting in malfunctions.

• Do not bump the projector.

• Avoid bumping the projector when moving or handling. Shocks can cause damage.

• Care of the projector

• To prevent risk of accidents, always disconnect the power plug before cleaning the projector.

• Clean the lens surface with a commercial blower or lens cleaning paper.

Wiping with tissue paper or a handkerchief can damage the lens.

• To clean the cabinet, operation panel, and glass surface, wipe gently with a soft cloth. For particularly dirty spots, soak

the cloth in a neutral detergent mixed in water, wring out well and wipe off the dirt, then use a dry cloth to wipe dry.

• Do not wipe the projector with any volatile solvent such as benzine or thinner.

Solvents can cause surface deformation or ﬂaking of the paint.

If using an impregnated cloth, follow the instructions of the cloth.

• Avoid scratching the glass surface.

• Take care not to scratch the glass surface of the scanner with hard or pointed objects.

Scratches on the glass may distort the projected image.

• Battery

• When inserting battery in the remote control, note the polarity (plus and minus signs) and insert correctly as indicated. In-

serting a battery in a wrong direction can cause rupture or leakage, and could result in ﬁre and injury or soil the surround-

ing area.

• Do not use coin battery other than the type speciﬁed for the equipment. Incorrect battery usage could result in rupture or

leakage, and could cause ﬁre and injury.

• Do not heat, break open, burn, or immerse the battery. Battery rupture or leakage could cause ﬁre and injury.

• Servicing and cleaning

• Have the internal components cleaned by a retailer about once a year. There is a risk of ﬁre or faulty operation if the

inside of the projector gets dusty and is not cleaned for a long time. For best results, the projector should be serviced be-

fore the wet season brings damp conditions. Cleaning charges are at the discretion of the retailer.

• If not using the projector for a long period:

• If you do not plan to use the projector for a long time, disconnect the power cord for safety.

• Disposal

• Follow the recommendations of your local authority when disposing of the projector.

• Transporting the projector

• Use the special packaging when transporting the projector. The manufacturer cannot accept responsibility in the event of

damage or accident if other packaging is used.

• Use the special packaging no more than two times. Repeated usage reduces the shock absorbency of the packaging and

can lead to damage or accident.

• Contact the retailer if you require new packaging.

E-ꢂ

Download from Www.Somanuals.com. All Manuals Search And Download.

Safety Precautions

• Lamp implosion

• A DC type Super High pressure lamp is used in this projector and it is rare for the lamp to explode during use. The unit is

also designed to forcibly turn off the lamp because there is a high possibility that the lamp will break if it is used beyond

the lamp usage of 1500 hours (Refer to pages E-42 and E-44).

Note the following things

• A sound occurs because the internal pressure of the Super High pressure lamp gets extremely high.

The unit is designed so that no pieces of glass come out of it when the lamp explodes.

• However, the gas inside of the lamp can escape and looks like white smoke.

It will not cause any ﬁre.

Remedy

• If a lamp explodes in a product, there will be pieces of lamp inside. Do not replace the lamp. Return the product to the

sales ofﬁce or agent of purchase.

Even though the lamp has exploded, never try to replace the lamp by yourself. The lamp pieces could cause injury.

• Replacing the lamp

• Be sure to turn the lamp off and disconnect the power cable when the fan stops, and wait an hour or more before replac-

ing the lamp.

Replacing the lamp during operation or just after the power is turned off may cause burns due to heat.

Refer to “Lamp Unit Replacement” on page E-42 for the procedure.

• Replacing / cleaning the air ﬁlter

• Be sure to disconnect the power cable when the cooling fan stops before removing the air ﬁlter.

Removing the air ﬁlter while the cooling fan is rotating could cause a accident.

Refer to “Cleaning the Air Filter” on page E-45 for the procedure.

• Avoiding malfunctions and accidents

• Adjust the Adjustable feet to keep the projector horizontally.

Using the projector in a tilted status may cause injury if it rolls over. Refer to

“Adjusting the Tilt” on page E-22 for the adjusting procedure.

• Do not do the followings

• Do not put anything heavy on the projector.

• Do not step on the projector, rack, or stand. Do not hold or hang on the projector.

Doing so could cause the projector to roll over or break, resulting in injury.

Especially be careful if small children are near.

• Do not use the rack unless the casters are locked when placing the projector on a rack with casters.

Doing so may cause the projector to move or roll over, resulting in injury.

• Do not turn the lamp on/off within one minute after it is turned off/on. Extremely high voltage is generated in the lamp just

after it is turned on. Turning the lamp on/off too frequently could cause the lamp to deteriorate or break, resulting in mal-

functions of the projector.

• Do not project an image with the lens cap attached.

• The cover that is attached to the bottom of the projector is strictly intended for maintenance purposes and should not be

opened by anyone except for service personnel

• Do not hold the projector by the focus adjustment ring. Doing so will cause an accident or damage.

• Moving the projector

• Be sure careful of the glass surface at moving the projector while holding the handles.

• If the document cover is not inserted enough, it may get loose and fall off while you carry it.

• Care of the power cable and plug

• Do not put the power cable near a heater.

Doing so could cause the sheath of the cable to melt down, resulting in ﬁre or electric shock.

• Do not connect or disconnect the power cable with wet hands. Doing so could cause electric shock.

• Be sure to pull out the power cable and disconnect any cable connections between units and release the anti-theft lock

before moving the projector.

Moving the projector with cables connected may cause ﬁre or electric shock if the cables are damaged.

• If you do not plan to use the projector for a long time, disconnect the power cable for safety.

• DO NOT REMOVE ANY SCREWS except the lamp cover screw and two lamp unit screws. Otherwise you could re-

ceive an electric shock.

• Light Polarizing Element

Light polarizing elements such as the light source lamp and the liquid crystal panel are parts that have a service life. When

used for a long time, repair and replacement will be necessary. Please contact a customer support center for details.

E-ꢃ

Download from Www.Somanuals.com. All Manuals Search And Download.

Table of Contents

Safety Precautions ................................................. E-3

Method of OHP Operation.................................... E-30

Attaching the Document Cover............................... E-30

Preparation of the Projection Document................. E-30

Reading Size of Projection Documents.................. E-30

A Check of the Supplied Items

and the Names of the Parts.............................. E-7

Supplied Parts Check............................................... E-7

Names and Functions of the Parts (Projector) ......... E-8

Names and Functions of the Parts (Input/Output Connectors) ...... E-10

Names and Functions of the Parts (Operation Panel) ............ E-11

Names and Functions of the Parts (Remote Control) ............ E-12

Operation of the Remote Control............................ E-13

Battery Replacement.............................................. E-13

Menu Conﬁguration.............................................. E-31

Menu Operation Method ...................................... E-32

Names and Functions of the Buttons Used

in Menu Operation........................................ E-32

Names and Functions of the Menu Parts ............... E-32

Method of Menu Operation..................................... E-33

Procedure Up to Projection................................. E-14

Projection Distance and Screen Size ................. E-15

Menu Description ................................................. E-35

Pointer ·Screen....................................................... E-35

Image adjustment................................................... E-36

Settings................................................................... E-38

Connections with the Personal Computer ................... E-16

Basic Connections.................................................. E-16

Connections with Personal Computers ................. E-16

Personal Computer Input Connector...................... E-17

When the Image of the Personal Computer

Maintenance.......................................................... E-40

Fault Protection ...................................................... E-40

Replacement of the Lamp Unit............................... E-42

Cleaning the Air Filter............................................. E-45

Screen Is Not Projected ................................... E-18

Table of Supported Input Signals

Troubleshooting ................................................... E-46

Repair Service....................................................... E-47

Speciﬁcations ....................................................... E-48

(Personal Computer Video Input Connector) .... E-19

Connections with Video Equipment ................... E-20

Connection of the Power Cable and

On/Off Switching ............................................. E-21

Switch On the Power.............................................. E-21

Switch Off the Power.............................................. E-21

Adjustment of the Projection Image................... E-22

Adjusting the Projection Image............................... E-22

Making Focus/Zoom Adjustments .......................... E-22

Adjusting the Tilt (Slant) ......................................... E-22

Regular Operation ................................................ E-23

Select the Input....................................................... E-23

Changing the Orientation of the Projection Image.. E-23

Enlarging and Reducing the Projection Image ....... E-24

Adjusting the size of the projected image............... E-25

Adjusting the Brightness......................................... E-26

Capturing the Projection Image/ Still Image Display ..... E-26

Viewing OHP History Images ................................. E-27

Transferring Captured Images................................ E-28

Adjusting the Volume.............................................. E-28

Displaying the Pointer............................................. E-29

Deleting the Projection Image and Audio ............... E-29

E-ꢄ

Download from Www.Somanuals.com. All Manuals Search And Download.

A Check of the Supplied Items and the Names of the Parts

Supplied Parts Check

Please check that the supplied parts are included.

iP-60E Projector

Lens cap

Remote control

Battery (AA x 2)

Power cable (3 m)

User's manual

iP Viewer Software Quick Reference

iP-60E User’s Manual

PC connection cable (2 m)

E-ꢅ

Download from Www.Somanuals.com. All Manuals Search And Download.

A Check of the Supplied Items and the Names of the Parts

Names and Functions of the Parts (Projector)

Document cover

Handle

The document or printed material to be read

is placed under this cover.

See Page E-30.

• Extended

• Retracted

Press lightly on the left side

of the handle and it rotates

180˚ and comes out.

Rotate the handle while

pressing on its right side to

store it.

Operation panel

The buttons used for regular operation are

located here. See Page E-11.

Speaker

Air Vent A (air ﬁlter)

Remote control IR sensor

(side of main unit)

Air is taken in through this

vent. An air filter is provided

to prevent dust from getting

inside the projector.

See page E-45.

Theft prevention lock

Tilt foot

Please see the Note below.

Focus adjustment ring

Turn this to adjust the focus.

See Page E-22.

Tilt adjustment lever

Press here to adjust the tilt foot. See Page

E-22.

Projection lens

The image is projected from

here.

* Be sure to remove the lens

cap before projecting.

Tilt foot

This foot is used to adjust the vertical angle

of the projection as well as the left-right bal-

ance. Turning it to the left extends it and turn-

ing it to the right shortens it. See Page E-22.

Lens cap

Zoom lever

Turn this to adjust the screen size. See Page E-22.

NOTE

About the anti-theft lock

The anti-theft lock is compatible with Kensington security cable lock.

Contact the following for more information about the products.

Kensington Technology Group

2000 Alameda de las Pulgas

Second Floor

7mm

3mm

San Mateo, California 94403-1289, U.S.A.

Phone: (650) 572-2700

Fax: (650) 572-9675

URL: http://www.kensington.com

E-ꢆ

Download from Www.Somanuals.com. All Manuals Search And Download.

A Check of the Supplied Items and the Names of the Parts

Document reading area

Speaker (1W Stereo)

The document or printed material that you wish to

project in the OHP mode is placed here.

See Page E-30.

Power input connector

Plug in the power cable

here. See Page E-21.

Scanner

Place documents or printed matter here to

project images when OHP is selected.

See page E-30.

Remote control IR sensor

Tilt foot

Air Vent B

Air is discharged from the inside to

the outside through this vent.

Input/Output connector panel

The connectors for the personal

computer, video, and other connec-

tions are located here.

Lamp unit cover (Underneath projector)

The projection lamp unit is located inside.

See Page E-42.

See Page E-10.

E-ꢇ

Download from Www.Somanuals.com. All Manuals Search And Download.

A Check of the Supplied Items and the Names of the Parts

Names and Functions of the Parts (Input/Output Connectors)

PC AUDIO

IN2

USB

RGB-IN 2

TEST

RGB-IN 1

RGB-OUT

PC AUDIO PC AUDIO

S-VIDEO

VIDEO

IN1

OUT

1. PC Video Input

5. Test (maintenance) connector

Input terminal for the PC analog RGB signals. Two per-

sonal computers can be connected. See Page E-16.

This special connector is used at the time of maintenance

and factory tests. It cannot be used for other connections.

2. PC Audio Input

6. Audio Output

Audio input terminal for a PC (stereo compatible). Two per-

sonal computers can be connected. See Page E-16.

Audio output terminal for projector.

This terminal outputs audio (either from the PC or video

source) that is currently being input. In the standby mode,

PC audio is output. When OHP input is selected, PC audio

is output.

3. RGB Video Output

When OHP is selected, OHP images are output. When

PC/VIDEO input is selected, input PC video is output as it

is. During standby, RGB-IN1 images that are input from the

personal computer are output directly. See Page E-16.

See Page E-16.

7. S-VIDEO Input

Input terminal for video source (Y/C).

See Page E-20.

4. USB connector

This connector is used for USB connections with a per-

sonal computer.

8. Video Source Video Input

Input terminal for video source (NTSC/PAL/SECAM).

See Page E-20.

Please see the "iP Viewer Software Program Operating In-

structions".

9. Video Source Audio Input

Audio input terminals for a video source (stereo compatible).

See Page E-20.

E-10

Download from Www.Somanuals.com. All Manuals Search And Download.

A Check of the Supplied Items and the Names of the Parts

Names and Functions of the Parts (Operation Panel)

5. INPUT SELECT Buttons

1. POWER Button

These buttons select the input source.

OHP PC1 PC2 VIDEO OHP ...

See Page E-23.

Switches the power of the projector on or off (standby

mode).

→

•

Only this button is effective when the projection lamp is

off.

See Page E-21.

6. PORTRAIT/TRANSFER Button

During OHP selection: The orientation of the projection

screen will be changed. The changed screen will be dis-

played adjusted to its width. See Page E-23, or the image

can be transferred by holding the button down for a long

time. See Page E-28.

During PC selection: When a USB cable is connected,

the images stored internally are transferred to the person-

al computer. See Page E-26, 28.

2. ON/STANDBY LED

Lit red during standby and lit green when the projection

lamp is on. See Page E-21.

3. LAMP/COVER LED

Lit green during projection. Lit red when the air filter or

lamp unit cover is not in place.

•

At the time of the projection lamp lighting operation, the

LED ﬂashes for about 6 seconds and then lights green.

The LED will be lit red when there has been a lamp

lighting error.

When the projection lamp is off, the LED ﬂashes green

for 60 seconds and then goes off. (When the projection

lamp is off, the ﬂashing interval will be longer than with

other ﬂashing conditions. )

7. BRIGHTNESS Buttons

These buttons adjust the brightness of the projection

screen. See Page E-26.

8. SCROLL Buttons

Sets the selection of the item or the adjustment value at

the menu screen. Moves the zoom position during a zoom

display. Moves the pointer when the pointer is being dis-

played.

•

When the projection lamp has been used in excess of

1,400 hours, the LED flashes red; when use exceeds

1,500 hours the LED is lit a steady red.

See Pages E-24, 25, 28, 29 and 32.

See Page E-40.

9. FREEZE/CAPTURE Button

4. TEMP LED

Makes the projection screen image into a still image. In the

OHP mode, the image is stored in internal memory as a

thumbnail.

When the internal temperature has risen excessively, the

LED ﬂashes red for 10 seconds, then is lit a steady red.

See Page E-40.

See Page E-26.

10. FREEZE OFF Button

LED List

Cancels the still image mode.

This is used when checking the projection screen while

moving the document.

LED State

Signiﬁcance

TEMP

Off

ON/STANDBY

Off

Red

LAMP/COVER

Off

AC power OFF

Off

Standby

See Page E-27.

Normal

condition

Standby to start of projection

End of projection to standby

Projecting

Green

Off

Flashing green

Green

11. FREEZE LED

This LED is lit green during the still image display and is lit

orange at the time the display is frozen (or captured). The

LED goes off when the still image condition is cancelled.

Fan cover open

Power

Lamp cover open

Lamp burned out

Lamp usage exceeds 1,500 hours

Temperature fault

Fan fault

has been

switched

OFF be-

cause of the

alarm

Red

Off

Red

12. ZOOM Buttons

Red

Off

These buttons adjust the magnification of the projection

screen. See Page E-24.

Green

Flashing red

Green

Off

Flashing red

Lamp usage exceeds 1,400 hours Alarm

sounding

Abnormal temperature warning

E-11

Download from Www.Somanuals.com. All Manuals Search And Download.

A Check of the Supplied Items and the Names of the Parts

Names and Functions of the Parts (Remote Control)

6. SET/POINTER Button

During menu display, this button advances the menu to

the next level. This button ﬁnalizes the setting at the time

of item selection. See Pages E-29 and 32. This button

displays a pointer when the menu screen is not displayed.

Press this button one more time to make the pointer disap-

pear.

7. SCROLL Buttons

Sets the selection of the item or the adjustment value at

the menu screen. Moves the zoom position during a zoom

display. Moves the pointer when the pointer is being dis-

played.

See Pages E-24, 25, 28, 29 and 32.

8. ZOOM Buttons

These buttons adjust the magnification of the projection

screen.

See Page E-24.

9. RESIZE Button

•

Press to change the size of the projected image when

OHP is selected.

•

Press to do automatic synchronous adjustments when

PC is selected.

See Page E-25.

10. PORTRAIT Button

Selects the orientation of the projection screen. The display

of the switched screen is adjusted to match the width.

See Page E-23.

1. POWER Button

Switches the power of the projector on or off (standby

mode).

11. BRIGHTNESS Buttons

•

Only this button is effective when the projection lamp is

off.

These buttons adjust the brightness of the projection

screen.

See Page E-21.

See Page E-26.

2. MUTE Button

12. VOLUME Buttons

Temporarily blanks the projection screen without switching

off the lamp. One more press causes the screen to return

immediately.

These buttons adjust the volume when the PC or video is

selected.

See Page E-28.

See Page E-29.

13. OHP Button

3. MENU Button

Switches the projector to OHP input. See Page E-23.

Switches on or off the display of the menu screen.

See Page E-32.

14. PC1/PC2 Button

Switches the projector to PC input. See Page E-23.

4. FREEZE OFF Button

Cancels the still image mode.

This is used when checking the projection screen while

moving the document.

15. VIDEO Button

Switches the projector to video input. See Page E-23.

See Page E-27.

16. THUMBNAIL Button

Displays the captured still image as a thumbnail.

See Page E-27.

5. FREEZE/CAPTURE Button

Makes the projection screen image into a still image. In the

OHP mode, the image is stored in internal memory as a

thumbnail.

See Page E-26.

E-1ꢀ

Download from Www.Somanuals.com. All Manuals Search And Download.

A Check of the Supplied Items and the Names of the Parts

Operation of the Remote Control

•

Please use the remote control within a range of about 7 m from the remote control IR sensor of the projector (located at

both the front and rear) and within an angle of 10 degrees to the left and 10 degrees to the right. Note that this distance

may be shorter depending on battery consumption.

The remote control will not function when there is an obstacle located between the remote control and the remote control

IR sensor of the projector.

Battery Replacement

1.Remove the battery compartment cover by

pushing in the claw and lifting the cover up.

2.Install two batteries in the battery compart-

ment, making sure that they are aligned as

indicated by the (+) and (–) marks.

3.Return the battery compartment cover to its

original position.

Handling of the Remote Control

•

Do not subject the remote controller to such severe impact as dropping it on the ﬂoor. Doing so may

damage it and cause it to cease functioning.

•

Keep the remote sensor away from water. Wipe the remote controller immediately if it gets wet.

Avoid heat or hot water. Remove the dry cells when you are not using the remote controller for a long

period of time.

CAUTION

•

Do not mix new and old dry cells, or use different types of dry cells at the same time.

Do not disassemble or heat batteries, or throw them into a ﬁre.

Follow your local government's disposal instructions for used dry cells.

The remote controller may not work when it is used near inverter-driven equipment.

The remote controller may not work or may work ineffectively when it is used near inverter-driven ﬂuo-

rescent lighting.

•

Please handle the remote control with care, since there are some operations available only with it.

NOTE:

• When replacing the batteries, buy AA batteries.

• Ni-Cad batteries or other chargeable batteries cannot be used. Use manganese batteries or alkaline batteries.

E-1ꢁ

Download from Www.Somanuals.com. All Manuals Search And Download.

Procedure Up to Projection

1 ^{Consideration of placement location and screen size}

Determine the screen and projector setup location.

Set the projector on a strong and stable, level platform.

See Page E-15 for information about the projection distance and screen size.

2 ^{Connections with input equipment}

Connect your personal computer/video equipment.

Connections with the Personal Computer

See Page E-16

→

Connections with the Video Equipment

See Page E-20

→

3 ^{Connect the power cable and switch on the power}

Switch On the Power

Switch Off the Power

See Page E-21

→

4 ^{Switch on the power of the personal computer or video equipment}

5 ^{Properly adjust the projection image to the screen}

Tilt foot

See Page E-15

→

Perform the tilt adjustment of the projector to provide the desired projection height.

The tilt adjustment allows the position of the projection image to be raised and lowered. The adjustment angle is from 0 de-

grees to 7 degrees.

Tilt adjustment

See Page E-22

→

6 ^{Select the input equipment}

See Page E-23

→

7 ^{Adjust the image or video}

Adjust the image to provide the optimum condition, as required.

See Page E-36

→

E-1ꢂ

Download from Www.Somanuals.com. All Manuals Search And Download.

Projection Distance and Screen Size

Please use the following diagrams to determine the screen display size and the type of screen required for any

given projector location.

Projection distances that will be in focus will be 1.4 m (4.6 feet) to 13.9 m (45.9 feet) from the front of the lens.

Please arrange the setup within this range.

Horizontal

Dimension

Projected Image Size

Projection Distance

(1.43 m to 13.9 m/1.5 yd to 15.2 yd)

Wide: The size of the projection image becomes

300

250

200

150

100

610 x 457

508 x 381

406 x 305

305 x 229

203 x 152

maximum with the projection image size

adjustment using the zoom lens

Tele: The size of the projection image becomes

minimum with the projection image size

adjustment using the zoom lens

Wide

Tele

(inch)

102 x 76

(cm)

13 13.9 (m)

Width x Height

Projection Distance

Setup Location

•

Do not place the projector in locations that will reach high temperatures or low temperatures.

Operation ambient temperature: 0°C (32°F) to 35°C (95°F)

•

Set the screen so that it is not exposed to direct sunlight or the light of direct illumination. When

light hits the screen, the screen show a white cast and will be difﬁcult to watch.

In a bright room, the curtains should be drawn or blinds closed and the area around the screen

kept dark.

CAUTION

•

Do not set up the projector in locations exposed to dampness, dust, greasy smoke or tobacco

smoke.

Doing so will result in the adhesion of dirt to lenses, mirrors, and other optical parts and cause a

degradation of image quality.

Do not place the projector in a location where the ventilation vents will be blocked or in closed ar-

eas having poor ventilation. Doing so will cause the temperature to rise and could cause a ﬁre or

accident. (Vents are located on the bottom and right side of the projector.)

E-1ꢃ

Download from Www.Somanuals.com. All Manuals Search And Download.

Connections with the Personal Computer

Connection Precautions

•

To protect this projector and the equipment to be connected, switch off the power of each unit be-

fore making connections.

Please read the various equipment instruction manuals for information about the connection of

the equipment and the method of use.

When connection is made with a notebook computer and the image is displayed on the LCD

screen of the notebook computer, a proper display might not be obtained on projection screen.

Switching off the display of the notebook computer will result in a proper display. The method of

switching off the display of the notebook computer will differ depending on the PC manufacturer.

Please read the instruction manual of the notebook computer for details.

CAUTION

•

Connection might not be possibly depending on the model and settings of the personal computer.

Please contact your dealer of purchase for further information.

Basic Connections

To the USB connector of

the personal computer

To RGB output con-

nector on PC

To analog RGB con-

nector on monitor

The connector cable model

No. differs according to the

type of PC.

To the audio output

connector of the

personal computer

Plug in the connection cable

and fasten with the screws

PC AUDIO

IN2

USB

RGB-IN 2

TEST

RGB-IN 1

RGB-OUT

T o s p e a k e r

input terminals

PC AUDIO PC AUDIO

S-VIDEO

VIDEO

IN1

OUT

Terminal panel on the back of the main unit

NOTE:

•

The personal computer has input terminals for both image and sound for “1” and “2”. Hook up the sound and image to the

corresponding terminals. If they are not hooked up to the corresponding terminals, the image and sound will not be output

correctly. Input Connectors

See Page E-10

→

•

Please see the "iP Viewer Software Program Operating Instructions" for the method of use when there is a USB cable con-

nection.

Connections with Personal Computers

PC connection cable RGB+USB (Supplied item)

Audio cable with mini plugs (Commercially available)

NOTE:

•

After connecting the RGB+USB cable, please set the personal computer external output and screen display.

When the settings of the external output have not been made, "No signal being input" will be displayed.

When a condition in which a signal has not been input continues for 15 minutes or longer, the lamp is turned off automatically.

E-1ꢄ

Download from Www.Somanuals.com. All Manuals Search And Download.

Connections with the Personal Computer

Connecting Macintosh Computers

•

Attach the supplied (RGB+USB) cable if when the monitor output is a VGA port (mini D-SUB 15-pin).

An optional Apple video adapter cable is required when the monitor output is a video port or DVI port.

Please do not make a USB connection because iP Viewer does not support the Macintosh.

Personal Computer Input Connector

The personal computer input connector uses a 15-pin mini D-SUB type connector.

The pins and their corresponding signal inputs are described below.

y GND

u GND

i GND

o NC

q RED VIDEO

w GREEN VIDEO

e BLUE VIDEO

r GND

! NC

! Pull up (+5V)

! H.SYNC

! V.SYNC

! Pull up (+5V)

15 14 13 12 11

! GND

t NC

NOTE:

•

This projector uses a 15-pin RGB input and an analog type output terminals. For this reason, it cannot be connected

to a digital output type personal computer.

•

Plug and play is not supported.

E-1ꢅ

Download from Www.Somanuals.com. All Manuals Search And Download.

Connections with the Personal Computer

When the Image of the Personal Computer Screen Is Not Projected

Please check the matters described below when the image of the personal computer is not projected or when there

is projection but the image is not correct.

The image is not projected

●

When the external output signal from the personal computer is not input to the projector, "No signal being input" is displayed on

the display screen of the projector. Should this occur, please check the following matters.

Try restarting the personal computer.

When the projector is connected after the personal computer has been started, the connection of the projector might not be

recognized by the personal computer. When the projector has not been recognized, the external output signal from the per-

sonal computer will not be output and there will not be an image to project.

Check the functions of the personal computer.

Depending on the notebook computer, some computers will require an operation to output a signal from the external output

connector. If this operation is not performed, the external output signal from the notebook computer will not be output.

Please see the instruction manual of the notebook computer you are using and perform the operation that will output the

signal from the external output connector.

(Operation Example)

IBM PC/AT and DOS/V computers:

Press the [Fn] key + "any one of the [F1] to [F12] keys (noting that the operation will differ depending on the model)"

PC98 notebook computers later than the Nr Series (with the exception of the PC-98NX):

Press the "Suspend Resume" switch.

Correspondence List for Connection Problems with the Personal

Manufacturer

Lenovo (Old IBM) Fn+f7

NEC Parallel output

External Output Switching Method

Manufacturer

DELL

External Output Switching Method

Fn+f8

Toshiba

Fn+f5

Switching from the Task Bar

Fn+f3

Panasonic

Fujitsu

Fn+f3

Fn+f10

HP (Old COMPAQ) Fn+f4

Mitsubishi

Apple

Fn+f5

Sharp

SONY

Fn+f5

Fn+f7

Control panel

→ monitor display switching

* This table indicates the results of an independent investigation by us of representative computers

made by various manufacturers; it does not include all of the connections.

* Company names and product names mentioned are the trade marks or registered trademarks of the

respective companies.

The screen of the personal computer is correct, but the image is not projected properly

●

Please check the functions of the personal computer.

Even though the LCD screen of the notebook computer is properly displayed, the projected image might not be projected

properly. Due to restrictions of the notebook computer there will rarely be instances in which the setting of a simultaneous

display (i.e., simultaneous output of the external output signal while displaying the screen of the personal computer) will re-

sult in a signal that greatly deviates from the range supported by the projector and proper projection will not be possible.

Should this occur, a proper image will not be obtained even when adjustments are made with the projector.

In some instances, the personal computer screen will be properly projected by the projector when the simultaneous display

is cancelled and an operation is performed to output only the external output signal. Please see the instruction manual of

the notebook computer you are using for details.

When a moving image is displayed on a portion of the screen, it is possible that a portion of the moving image only is dis-

played black. Should this occur, please read the instruction manual of the personal computer carefully and set the personal

computer accordingly.

E-1ꢆ

Download from Www.Somanuals.com. All Manuals Search And Download.

Connections with the Personal Computer

Table of Supported Input Signals (Personal Computer Video Input Connector)

Signals indicated with a “Yes” are supported. Note that depending on the model of personal computer, please per-

form the screen adjustment of the "Image adjustment"

on the projection screen.

"Sync adjustment" menu if ﬂickering or bleeding appear

→

See Page E-37

→

Signal Name

Resolution

Horizontal Frequency

(kHz)

15.7

15.6

24.8

31.5

37.8

37.5

43.2

35.0

35.1

37.8

48.0

46.8

49.7

35.5

48.3

56.4

60.0

68.7

60.2

68.7

60.0

85.9

64.0

80.0

91.1

75.0

81.3

87.5

93.8

106.3

Vertical Frequency

(Hz)

Supported

(Horizontal  Vertical)

NTSC RGB

PAL/SECAM RGB

PC-98 Normal*

PC-98 Hi

–

640

400

480

400

350

400

350

480

600

624

768

864

960

1024

1200

Yes

640

VGA-GR1

640

VGA-GR2*

VGA-GR3*

VGA-TX1*

640

720

VGA-TX2*

720

640

480 72Hz

480 75Hz

480 85Hz

640



640

Mac13" RGB

640

800

600 56Hz

600 60Hz

600 72Hz

600 75Hz

800



800

Mac16" RGB

832

1024

768 43Hz

768 60Hz

768 70Hz

768 75Hz

768 85Hz

1024

1152

1280

1600



Yes

MAC19"1024

MAC21"1152

768

864



1280

1600

960 60Hz



960 85Hz

1024 60Hz

1024 75Hz

1024 85Hz

1200 60Hz

1200 65Hz

1200 70Hz

1200 75Hz

1200 85Hz

•

When the resolution of the input signal is lower than 1024

768 dots, the image is enlarged and displayed; if the



resolution is higher than 1024

768 dots, the image is reduced and displayed.



The signals above marked with (*) may not display properly when full keystone correction is applied. When using

these signals and applying keystone correction, please check the image while making the setting so that the image is

not adversely affected.

E-1ꢇ

Download from Www.Somanuals.com. All Manuals Search And Download.

Connections with Video Equipment

The video of a video tape deck or DVD player is projected onto a large screen.

PC AUDIO

USB

RGB-IN 2

IN2

TEST

RGB-IN 1

RGB-OUT

PC AUDIO PC AUDIO

S-VIDEO

VIDEO

IN1

OUT

Projector side connector panel

To the video output connector

To the audio output connectors

Video deck

DVD player

NOTE:

•

When both Video and S-video connections have been made, S-video will be given priority for dis-

play.

When a video signal have a lot of noise, the image may be displayed in monochrome. Should this

occur, make a setting with the "Video select" menu to suit the input signal.

When a condition in which a signal has not been input continues for 15 minutes or longer, the lamp

is turned off automatically.

E-ꢀ0

Download from Www.Somanuals.com. All Manuals Search And Download.

Connection of the Power Cable and On/Off Switching

Switch On the Power

Connect the power cable

The projector will enter the standby mode

and the ON/STANDBY LED will light in red.

To wall outlet.

Press the POWER button ( )

The fan will turn, the lamp will light, and the ON/STANDBY LED will light in

Operation with the

Remote Control

Operation with the

Projector

green.

The LAMP/COVER LED will ﬂash in green and then light steadily.

•

If the LED lights in red after the POWER button is pressed, projector

trouble is indicated.

See Page E-40

→

Check that the lens cap has been removed before pressing the POWER

button.

The projector is now able to make a projection.

Switch on the power of the connected equipment

Switch Off the Power

Operation with the

Remote Control

Operation with the

Projector

Press and hold the POWER button ( ) for 1 second or longer

"Press POWER button again to turn off" will appear on the projection screen.

Press the POWER button ( ) one more time.

The lamp will go off.

•

The LAMP/COVER LED ﬂashes green and then goes off after about

60 seconds.

The ON/STANDBY LED lights in resistance.

•

When the lamp is off, pressing the POWER button while the LAMP/COVER LED is ﬂashing green will not switch the

lamp on again.

To switch the lamp on again, please press the POWER button again after the ON/STANDBY LED lights in red.

Disconnecting the Power Cable

The ON/STANDBY LED on the operation panel will go off.

•

Do not disconnect the power cable while the lamp is on or while the ventilation fan is turning.

Unplug the power plug of the projector from the wall outlet when the projector will not be used for an

extended period.

CAUTION

•

When the reinserting the power plug into the outlet soon after having unplugged it, please allow a

ﬁxed time (of about 10 seconds) before doing so.

E-ꢀ1

Download from Www.Somanuals.com. All Manuals Search And Download.

Adjustment of the Projection Image

Adjusting the Projection Image

Adjust the projection image to the screen.

Right angle

•

When the image is shifted to the left or right, move the projector horizontally. (Align the center of the screen with the center of

the projector lens.)

•

When the image is shifted up or down, use the tilt foot to adjust the projector vertically.

When the image is slanted, turn the left or right tilt foot to adjust.

When there is keystone distortion of the image, adjust with "Keystone" of the menu operations.

See Pages E-33 and 38.

→

Making Focus/Zoom Adjustments

Turn the focus ring/zoom lever of the projection lens and adjust the projection image.

Adjusting the Tilt (Slant)

The position and tilt angle of the projected image can be adjusted by adjusting the adjustable feet. Press both the

left and right tilt adjustment levers to lift the main unit, and release them when the desired height is reached. You

can ﬁne-adjust the tilt by turning the bottom section of the adjustable feet. Turning this section counterclockwise

raises the main unit, and turning it clockwise lowers the main unit. Also, you can adjust the tilt angle by turning the

adjustable foot located on the rear left of the main unit.

Tilt adjust levers

Down

Adjustable feet

Down

•

Do not lengthen the tilt foot on only one side which would place the projector on an extreme slant. Doing

so could result in the projector slipping or falling over and could cause an accident or breakdown.

When moving the projector, be sure to return the tilt foot to the original position.

The air intake vents on the side of the projector draw in cooling air with a strong air current. When

cloth or paper adheres to and covers the air intake vents, the internal temperature rises and could

cause an accident or breakdown.

•

CAUTION

•

Depending upon the material of the placement location, the rubber feet may soil on the placement

surface.

E-ꢀꢀ

Download from Www.Somanuals.com. All Manuals Search And Download.

Regular Operation

This section describes the use of direct operation using the projector and remote control buttons.

Please see the items on Page E-32 "Menu Operation Method" and Page E-35 "Menu Description" for information

about operation using the menu.

Select the Input

When the power of the projector is switched on, the input selection (OHP / PC1 / PC2 / VIDEO) icon is displayed.

Operation with the Projector

Select the input using the INPUT SELECT buttons.

Each press switches the input one step in the se-

quence of OHP PC1 PC2 VIDEO.

→

Operation with the Remote Control

VIDEO

PC1 PC2

Select the input using the INPUT SELECT buttons.

OHP

NOTE:

•

The input mode at starting time will be the same as it was the last time the projector was switched off.

When the icon is displayed, either the left or right key permits input switching.

Effective Only with OHP Input

Changing the Orientation of the Projection Image

This operation switches the (vertical/horizontal) orientation of the currently projected image.

The display of the switched screen is adjusted to match the width.

Operation with the Projector

Press the PORTRAIT button.

Operation with the Remote Control

Press the PORTRAIT button.

E-ꢀꢁ

Download from Www.Somanuals.com. All Manuals Search And Download.

Regular Operation

To view the portion that has been cut off

Operation with the Projector

Press the SCROLL ( ) buttons and scroll the pro-



jection image up or down.

Operation with the Remote Control

Press the SCROLL ( ) buttons and scroll the pro-



jection image up or down.

•

Pressing the ZOOM (–) button permits display of a large portion within the

reading range of the vertical display. The undisplayed portion can be displayed

with the SCROLL (



) buttons.

NOTE: When the orientation of the projection image is changed, even if the zoom function is in use, the display of the switched

screen will be adjusted to match the width, the same as with regular changes of orientation.

Enlarging and Reducing the Projection Image

This operation enlarges or reduces the size of projected image.

Adjustment is possible over a range: approximately 25 times (a length ratio of approximately 5 times) in OHP input

mode from the same size, and 16 times (a length ratio of 4 times) in PC input mode and Video input mode.

Operation with the Projector

Press the ZOOM button.

: Enlarge the size of the projected image

: Reduce the size of the projected image

Operation with the Remote Control

(+): Enlarge the size of the projected image

(–): Reduce the size of the projected image

E-ꢀꢂ

Download from Www.Somanuals.com. All Manuals Search And Download.

Regular Operation

Moving the Screen

Movement is possible in 4 directions (up, down, left, and right).

Operation with the Projector

Press the SCROLL ( ) buttons.



Operation with the Remote Control

Press the SCROLL ( ) buttons.



Adjusting the size of the projected image

While the image is displayed vertically, each press of the RESIZE button will toggle the dis-

play between a display that matches the horizontal width and a display that matches the ver-

tical width. (The display will also change in the same way when the zoom magniﬁcation has

been adjusted.)

Operation with the Projector

A full-screen display of captured images is not available from

the operation panel of the projector.

Operation with the Remote Control

Press the RESIZE button.

NOTE: At time of PC input, pressing the RESIZE button will perform a sync adjustment.

E-ꢀꢃ

Download from Www.Somanuals.com. All Manuals Search And Download.

Regular Operation

Adjusting the Brightness

To change the brightness, perform a manual adjustment using the method described below.

Operation with the Projector

Adjust using the BRIGHTNESS (

) buttons.

: Projection image becomes brighter

: Projection image becomes darker

Operation with the Remote Control

Adjust using the BRIGHTNESS (+)/(-) buttons.

(+) : Projection image becomes brighter

(–) : Projection image becomes darker

Brightness adjustment bar

NOTE: Once the brightness adjustment bar has been displayed, it will disappear after 10 seconds if there is no brightness ad-

justment.

Effective Only with OHP Input

Capturing the Projection Image

During OHP Input

Still Image Display

Operation with the Projector

Press the FREEZE/CAPTURE button.

Pressing the FREEZE/CAPTURE button captures the

OHP image that is currently being projected and saves it

as an image ﬁle.

The captured images are automatically stored in internal

memory as OHP history images to maximum of 32 im-

ages.

Operation with the Remote Control

Press the FREEZE/CAPTURE button.

The projected image will freeze at this time.

USB Connection Is Available

By transferring the images that are in memory to the personal computer, they

can be stored again in the 32-page memory.

The USB icon is displayed at the time of image capture. The icon display will

differ depending on the current number of memory pages.

(1 to 10 pages

/ 11 to 20 pages

/ 21 to 32 pages

will be displayed.

)

* When saving is no longer possible,

Please see Page E-28 for information about the method of transfer.

USB Connection Is Not Available

When the maximum number of stored images has been exceeded, each time

an image is captured the oldest image will be deleted.

The Freeze icon is displayed at the time of image capture.

Each time a new image is cap-

tured, the oldest image is deleted.

E-ꢀꢄ

Download from Www.Somanuals.com. All Manuals Search And Download.

Regular Operation

During PC/VIDEO Input

Each time the FREEZE/CAPTURE button is pressed, the currently projected image will be frozen (in a ﬁxed display).

NOTE:

•

The FREEZE LED is lit green during the still image display.

A press of the FREEZE/CAPTURE button while a moving image is projected will result in a still image display at the existing

zoom magniﬁcation and position.

•

A press of the FREEZE/CAPTURE button at the time of still image of OHP will result in a return of the zoom magniﬁcation

and position to the original condition.

A press of the projector INPUT SELECT buttons or one of the remote control OHP / PC / VIDEO buttons during a still image

display will cancel the still image of the PC or video deck. OHP will retain the still image.

Cancelling the Still Image Display

Operation with the Projector

Press the FREEZE OFF button.

Operation with the Remote Control

Press the FREEZE OFF button.

NOTE: The FREEZE LED will go off when the still image display is cancelled.

Viewing OHP History Images

Viewing captured images

Operation with the Projector

A list display of captured images is not available from

the operation panel of the projector.

Operation with the Remote Control

Press the THUMBNAIL button.

E-ꢀꢅ

Download from Www.Somanuals.com. All Manuals Search And Download.

Regular Operation

Full-screen Display of Thumbnail Images

Operation with the Projector

A full-screen display of captured images is not available

from the operation panel of the projector.

Operation with the Remote Control

Select the images that you would like to display full

screen using the SCROLL (

) buttons and press



the POINTER/SET button.

NOTE: The FREEZE LED is lit orange during the thumbnail display.

Transferring Captured Images

Operation with the Projector

When connection is made with a USB cable,

history images can be transferred to the per-

sonal computer. Please switch the input to

"PC" and press the data TRANSFER button.

When the input is set to OHP, holding down

the data TRANSFER button for an extended

time will permit the image to be transferred.

Press the TRANSFER button.

NOTE: Please see the attached "iP Viewer Program Quick Reference" or the "iP Viewer Software Program Operating In-

structions" for information about the iP Viewer operation method.

Effective only During PC and VIDEO Input

Adjusting the Volume

Operation with the Projector

Volume adjustment cannot be made at the operation

panel of the projector.

Operation with the Remote Control

Adjust using the VOLUME (+/-) buttons.

Volume adjustment bar

NOTE: Once the volume adjustment bar has been displayed, it will disappear when 10 seconds have passed without a volume

adjustment operation being made.

E-ꢀꢆ

Download from Www.Somanuals.com. All Manuals Search And Download.

Regular Operation

Displaying the Pointer

This operation displays the pointer in the currently projected image.

Operation with the Projector

The ability to turn on and turn off the pointer is not

available from the operation panel of the projector.

Operation with the Remote Control

Press the POINTER/SET button.

One more press of the POINTER/SET button while the

pointer is displayed will turn off the pointer display.

Moving the Pointer

Operation with the Projector

Press the SCROLL ( ) buttons.



Operation with the Remote Control

Press the SCROLL ( ) buttons.



See Page E-35 for information about the form, color, and size of the pointer.

NOTE:

•

When the brightness is adjusted while the pointer is displayed, the pointer will disappear temporarily; however, it will reappear

soon.

Deleting the Projection Image and Audio

This operation deletes the currently projected image and audio without switching off the lamp.

Operation with the Projector

The ability to delete the projection image is not available from

the operation panel of the projector.

Operation with the Remote Control

Press the MUTE button.

NOTE: When a ﬁxed period of time elapses (about 30 minutes) with the video/audio muted, a message will be displayed to

check whether to shut down the projector. Selection of "Yes" will set the projector to the standby mode, while a selection of "No"

will again delete the video/audio.

When there has been an absence of an operation for 15 seconds during the display of the above conﬁrmation message, the pro-

jector automatically enters the standby mode.

E-ꢀꢇ

Download from Www.Somanuals.com. All Manuals Search And Download.

Method of OHP Operation

Attaching the Document Cover

The document cover can be removed to suit the

circumstances.

NOTE: When removing the document cover, lift the cover by

both hands and remove it.

Preparation of the Projection Document

The document (printed material) that is to be projected is placed on the projector as illustrated in the diagram be-

low and the document cover is closed.

Horizontal document

Top side

Vertical document Top side

NOTE:

•

The document can be projected even when the document cover has not been closed; however, in this instance, un-

necessary items may be projected which will make the image difﬁcult to view.

•

When paper having luster such as magazine covers are placed on the projector, the internal ﬂuorescent lamp light will

be picked up and the edges of the projected document may be messy.

Reading Size of Projection Documents

A4 Paper

The maximum reading size of documents and printed material is 216 mm high

by 288 mm wide.

297 mm (Paper size)

Consequently, when A4 paper (210 mm high and 297.5 mm wide) is placed on

the projector, reading will be as illustrated in the diagram below (which depicts

the area that can be projected as the portion with diagonal lines).

288 mm (Reading size)

The portion that falls outside of the reading range will not be projected;

therefore, shift the paper as required.

Other functions that are used in the OHP operation can be seen on the following pages:

Switching the input to OHP

See Page E-23

●

→

Changing the projection image to a still image display

See Page E-26

→

Capturing a projection image

See Page E-26

→

Viewing captured images

See Page E-27

→

E-ꢁ0

Download from Www.Somanuals.com. All Manuals Search And Download.

Menu Conﬁguration

The adjustment/setting items and content will differ depending on the input selection and the permitted information

will be displayed on the menu for that input mode.

Settings

Pointer • Screen

Image adjustment

OHP/ PC / VIDEO Common

During OHP Input

OHP / PC / VIDEO Common

During OHP History List Display

During PC Input

During OHP History Single-page Display

During VIDEO Input

E-ꢁ1

Download from Www.Somanuals.com. All Manuals Search And Download.

Menu Operation Method

Names and Functions of the Buttons Used in Menu Operation

MENU Button

Used to display a menu and

to close a menu.

SCROLL

Buttons



Used in the selection of menu

names and item names, and to set

and adjust item contents.

POINTER/SET Button

Used to finalize a setting after

making the setting or adjustment.

Names and Functions of the Menu Parts

Menu tab

Switches to the various

menus when selected.

Adjustment bar

Indicates the adjustment

condition according to the

increase or decrease of

the bar point.

Cursor (Light blue)

Selects the item that

you would like to set or

adjust.

Sub menu icon

Returns the set or adjusted item to

When an item containing this icon is selected,

there is a change to the sub menu.

the standard value (shipping de-

fault condition of our factory).

Returns to the menu that is one layer higher.

E-ꢁꢀ

Download from Www.Somanuals.com. All Manuals Search And Download.

Menu Operation Method

Method of Menu Operation

This section describes the actual operation method. Adjustment of [Keystone] using the remote control is provided

as an example.

Press the MENU button and display the menu

2 ^{Select [Settings] with the SCROLL}^^buttons

Each press of the SCROLL button switches the menu one step in the sequence of [Pointer • Screen]

[Image



→

adjustment]

[Settings], and each press of the SCROLL button causes a return in the opposite direction.

→



3 ^{Select [Keystone] with the SCROLL}^^button

Move the cursor and select [Keystone].

E-ꢁꢁ

Download from Www.Somanuals.com. All Manuals Search And Download.

Menu Operation Method

4 ^{Press the POINTER/SET Button}

Switches the menu to the sub menu (i.e., the Key-

stone adjustment menu).

5 ^{Make the adjustment with the SCROLL}^^{buttons while checking the projection image}

Scroll button: Each press increases the value of the



vertical orientation. (The top part of the

projection screen will become narrower.)

Scroll button: Each press decreases the value of the



vertical orientation. (The bottom part of the

projection screen will become narrower.)

6 ^{Press the MENU button and close the menu}^Scroll

button: Each press decreases the value of the

horizontal orientation. (The left side of the

projection screen will become narrower.)



Scroll button: Each press increases the value of the hor-



izontal orientation. (The right side of the

projection screen will become narrower.)

This completes the [Keystone] adjustment.

E-ꢁꢂ

Download from Www.Somanuals.com. All Manuals Search And Download.

Menu Description

Pointer • Screen

This selects the shape, color, and size of the pointer.

Pointer shape .................... Selects the shape of the pointer from

2 types.



Pointer color ...................... Selects the color of the pointer from

amongst 3 types (i.e., red, white, and

blue).

Pointer size........................ The size of the pointer can be

changed in 3 levels.



RGB-OUT Select............... PC/OHP: When the input selection

is OHP, an OHP image will be out-

put. When the input selection is PC

VIDEO, a PC input image will be dis-

played.

OHP: Outputs an OHP image regard-

less of the input selection.

Mute mode ........................ Sets the image that will be displayed

at the time of screen deletion.



Black: Displays an entirely black

screen

Wallpaper: Displays a Wallpaper im-

age.

Image Mode ...................... Standard: Displays of varied tone

having strong contrast.



Natural: Displays an image having

color closer to that of the original im-

age.

The following items will be displayed only during the projection

of the OHP history list screen.

Delete entire history ........A confirmation screen will be dis-

played. Select "YES" and press the



POINTER/SET button to delete all

of the OHP history images that are

saved in the internal memory.

E-ꢁꢃ

Download from Www.Somanuals.com. All Manuals Search And Download.

Menu Description

The following items will be displayed only during the projection

of the page that was selected from the OHP history list.

Back page in history........Switches to the history screen that

was stored before the currently pro-



jected history screen.

Next page in history.........Switches to the history screen that

was stored immediately after the



currently projected history screen.

NOTE:

RGB-OUT selection and muted screen selection are available

•

only when USB is not connected.

Image adjustment

During OHP input

This performs the settings and adjustments related to the

projected image.

When OHP input has been selected.

Red



(Red color adjustment) ........Adjusts the deepness of the red

color in the range of -50 to 50.

Blue



(Blue color adjustment)........Adjusts the deepness of the blue

color in the range of -50 to 50.

During PC input

When PC input has been selected

Contrast...........................Adjusts the contrast of the project-



ed image in the range of -50 to 50.

Brightness .......................Adjusts the brightness of the pro-



jected image in the range of -50 to

50.

Red



(Red color adjustment) ........Adjusts the deepness of the red

color in the range of -50 to 50.

Blue



(Blue color adjustment)........Adjusts the deepness of the blue

color in the range of -50 to 50.

Sharpness .......................Selects the sharpness of the pro-

jected image from amongst 5 lev-

els. As the numerical value increas-

es, the sharpness of the image is

enhanced.



E-ꢁꢄ

Download from Www.Somanuals.com. All Manuals Search And Download.

Menu Description

Sub menu: Sync adjustment

Clock ...............................Adjusts the horizontal size of the



projected image in the range of -50

to 50.

Phase ..............................Adjusts the noise/flickering of the

projected image in the range of -50

to 50.

Horizontal ........................Adjusts the horizontal position of

the projected image in the range of

-50 to 50.

Vertical ............................Adjusts the vertical position of the

projected image in the range of -50

to 50.

Auto adjustment ..............Performs sync adjustment auto-

matically.

NOTE: Depending on the PC input signal, there might not be a change as far as from -50 to 50.

During VIDEO input

When VIDEO input has been selected

Contrast...........................Adjusts the contrast of the project-

ed image in the range of -50 to 50.

Brightness .......................Adjusts the brightness of the pro-

jected image in the range of -50 to

50.



Color................................Adjusts the deepness of the color

in the range of -50 to 50.



Hue..................................Adjusts the hue in the range of

-50 to 50. As the numerical value

becomes lower, the color becomes

greenish and as the numerical

value increases, the color becomes

reddish.

Sharpness .......................Selects the sharpness of the pro-

jected image from amongst 5 lev-

els. As the numerical value increas-

es, the sharpness of the image is

enhanced.



Sub menu: Video Select

This selects the input signal system.

Auto (detects the signal system automatically) / NTSC 3.58

/ NTSC 4.43 / SECAM / PAL B, G, H, I / PAL M / PAL N

E-ꢁꢅ

Download from Www.Somanuals.com. All Manuals Search And Download.

Menu Description

Settings

This performs settings related to the projector unit or while

the projector is in use.

Lamp usage time.............Displays the usage time of the lamp.



"Replacement of the Lamp Unit"

See Page E-42

→

Input signal......................The name of the currently selected

input is displayed.



Setting Items

Keystone .........................Performs keystone correction of the



projection image.

Press the

age narrower.

button to make the top of the projected im-



▽

Press the button to make the bottom of the projected



image narrower.

▽

Press the button to make the left side of the projected



image narrower.

Press the button to make the right side of the projected



image narrower.

A press of the Cancellation button of the projector or re-

mote control will return the settings to "0" (no correction).

Continued on the next page

NOTE:

•

When keystone compensation is performed, the resolution at the edges of the projected image is reduced, making small

characters difﬁcult to read. To prevent this, place the projector on as level a surface as possible, and set the Keystone menu

to “0” (No compensation).

•

As image processing is performed for keystone compensation, displayed images (characters, etc.) are displayed slightly

blurred when keystone compensation is used compared with when it is not used.

When displaying an image with VGA resolution less than 640 x 480 pixels with a excessive horizontal keystone compensa-

tion may cause parts of the image to become fuzzy. See page E-19 for more information.

The degree to which keystone compensation can be adjusted depends on the image signal.

If the horizontal value is adjusted to its largest (or smallest) the vertical adjustment value can not be moved in the plus direc-

tion when doing keystone compensation.

•

E-ꢁꢆ

Download from Www.Somanuals.com. All Manuals Search And Download.

Menu Description

Language selection .........Selects from among the following

languages the language for use in

the menus and message indica-

tions: Japanese, English, German,

French, Spanish, Italian, Chinese,

and Korean.



Projection mode ..............Selects the projection system of the

projector from between Front (front

projection) and Rear (rear projec-

tion).



Economy mode ...............ON (Economy mode):

Sets the lamp to the economy

mode.

OFF (High brightness mode):

The brightness of the lamp will

be 100%. There will be a bright

screen.

E-ꢁꢇ

Download from Www.Somanuals.com. All Manuals Search And Download.

Maintenance

Fault Protection

The projector is equipped with a built-in protection circuit to prevent ﬁre and breakdown due to faults.

When the LAMP/COVER LED lights in red

Measures to be taken



1. Disconnect the power plug from the outlet.

2. Properly install the air ﬁlter. See "Air Filter Cleaning" on Page E-45.

3. Properly install the lamp unit cover. See "Replacement of the Lamp Unit" on Page E-42.

When the TEMP LED ﬂashes or lights steadily

Measures to be taken



1. Disconnect the power plug from the outlet.

2. Check the following matters and perform the countermeasure properly.

Is the ambient temperature

in excess of 35°C (95°F)?

Please use the projector in an operation ambient temperature

of 0°C (32°F) to 35°C (95°F).

Rearrange the setup location of the projector and separate the

projector from surrounding objects. See "Do Not Block the air

vents" on Page E-4.

Are the ventilation vents

blocked?

Clean the air ﬁlter.

Is the air ﬁlter blocked?

See "Cleaning the Air Filter" on Page E-45.

Breakdown of an internal cir-

cuit could be the problem.

Please request repair at your dealer of purchase.

* The projector is running properly when the TEMP LED turn off.

* When the LAMP/COVER LED is lit red at the same time, please replace the lamp. See Page E-42 for information about

the replacement method.

* The ﬂashing of the TEMP LED is a warning of a high temperature.

When the usage circumstances have not changed after 10 seconds have elapsed since the start of the ﬂashing, the

TEMP LED changes to be lit steady and the lamp goes off.

E-ꢂ0

Download from Www.Somanuals.com. All Manuals Search And Download.

Maintenance

When the power has failed (When all the LED go off with the power ON)

Measures to be taken



1. Disconnect the power plug from the outlet.

2. Check the following matters and perform the countermeasure properly.

Is the ambient temperature

Please use the projector in an operation ambient tempera-

ture of 0°C (32°F) to 35°C (95°F).

in excess of 35°C (95°F)?

Rearrange the setup location of the projector and separate

the projector from surrounding objects. See "Do Not Block

the air vents" on Page E-4.

Are the ventilation vents

blocked?

Clean the air ﬁlter.

Is the air ﬁlter blocked?

See "Cleaning the Air Filter" on Page E-45.

Breakdown of an internal

circuit could be the problem.

Please request repair at your store of purchase.

E-ꢂ1

Download from Www.Somanuals.com. All Manuals Search And Download.

Maintenance

Replacement of the Lamp Unit

Guidelines for the replacement of the projection lamp used in this projector are described below. (The time may be

shorter depending on usage conditions.)

When the usage time exceeds the time described below, the likelihood of rupture increases, the projector will be forced

to turn off the projection lamp.

When the lamp usage time has exceeded 1400 hours, please replace the lamp unit (available separately). Also, when the image

becomes dark or the hue worsens, we recommend to replace the lamp; please replace with a new lamp unit.

When messages such as the following appear when the lamp lights.

(This will be displayed when the lamp usage time exceeds 1400 hours.)



When "Lamp usage time" on the menu display screen becomes 1400 hours.

The LAMP/COVER LED ﬂashes red.



The lamp usage time is displayed in the "Settings" menu and can be checked. (See Page E-38.)

When the LAMP/COVER LED lights in red without the lamp lighting.

(When the lamp usage time has exceeded 1500 hours.)

•

Do not replace the lamp unit immediately after using the projector.

The lamp is high temperature and you could get burned. Disconnect the power plug from the outlet

and wait one hour or longer before replacing the lamp.

•

Do not touch the glass portion of the lamp unit with your hands. Doing so could lower the brightness

and shorten the life of the lamp.

WARNING

CAUTION

There is a large number of glass parts such as the lamp and mirrors that are used inside the pro-

jector. If a glass part breaks, please exercise due caution in handling so that you are not injured by

fragments. Please request repair from the store of purchase or an AVIO customer support center.

Please specify the dedicated lamp unit (Model: IPLK-F1).

E-ꢂꢀ

Download from Www.Somanuals.com. All Manuals Search And Download.

Maintenance

Lamp Unit Replacement Procedure

To prevent burns, wait one hour or longer after

the lamp has been switched off before perform-

ing the following procedure.

1 ^{Remove the lamp unit cover}

Using a minus screwdriver, loosen the screws of the

lamp unit cover, pull in the direction of the arrow, and

remove the cover.

Loosen the mounting screws of the lamp unit

Using a minus screwdriver, loosen the 2 screws of the

lamp unit.

3 ^{Pull out the lamp unit}

Hold the handle of the lamp unit and pull it up and out.

4 ^{Install a new lamp unit}

Take the lamp unit and press it into the projector.

Tighten the 2 mounting screws of the lamp unit.

Align the 2 tabs located on the lamp unit cover with the

projector and attach from the side of the tabs. Tighten

the mounting screws of the lamp unit cover.







E-ꢂꢁ

Download from Www.Somanuals.com. All Manuals Search And Download.

Maintenance

5 ^{Reset the lamp usage time}

Please perform the operation indicated below in the standby mode (*).

Operation with the Projector

Press these

button.

buttons in order while pressing the

Operation with the Remote Control

Resetting of the lamp usage time cannot be performed with the remote

control.

The LAMP/COVER LED will ﬂash green following this and projection will start.

* The power plug is plugged into a power outlet and only the ON/STANDBY LED is lit red.

•

Do not reset the lamp usage time without replacing the lamp.

The likelihood of the lamp rupturing becomes higher when the lamp has been used in excess of

1500 hours.

CAUTION

6 ^{Check that the indication of the lamp}

usage time has become "0 H" as illus-

trated in the diagram to the right.

If the usage time has not been reset, please reset

it by following Step 5 again.

Check the lamp usage time by pressing the menu button

of the remote control to display the menu, then use the

scroll

button to display the setup setting.



If the lamp is used without resetting the usage time, the correct lamp usage time will not be known;

CAUTION

NOTE:

therefore, be sure to reset the usage time after lamp replacement. When the indication exceeds 1500

hours, the projector will be forced to turn off the projection lamp.

•

In the interest of safety, the lamp will not light when the lamp unit cover is off.

The lamp units that are available separately are sold together with an air ﬁlter cover as a set in a lamp kit; therefore,

please also replace the air ﬁlter cover at the same time as lamp unit replacement. (See Page E-45.)

Lamp units can be disposed of using the same disposal method as household ﬂuorescent lamps in accordance with

the regulations of your region.

•

E-ꢂꢂ

Download from Www.Somanuals.com. All Manuals Search And Download.

Maintenance

Cleaning the Air Filter

The air ﬁlter is an important part that prevents the intrusion of dust onto the optical parts and other parts inside

the projector. When the air ﬁlter becomes blocked, the internal temperature will rise and the rotation of the fan will

also increase leading to a reduction of the service life or causing breakdown. In view of this, the air ﬁlter should be

cleaned regularly (about once a month, when the projector is used 4 hours per day).

Note that the air ﬁlter should be replaced with a new one when it becomes difﬁcult to clean out the dust.

Air Filter Cleaning Procedure

1 ^{Remove the air ﬁlter cover}

Press the 2 tabs of the air filter cover down-

ward while swinging the cover outward to re-

move the air ﬁlter cover.

2 ^{Vacuum away the dust}

Please vacuum away the dust from the outside

(protruding side) of the air ﬁlter as illustrated in

the diagram.

3 ^Install

Installation is performed by following the steps

for removal in reverse order. Press in the air

ﬁlter cover until a click sound is heard.

Air ﬁlter care and precautions

•

Do not wash with water nor with hot water. Doing so will cause blockage.

Do not wipe with a cloth or damp rag. Doing so will cause blockage.

Always vacuum from the outside of the air ﬁlter. If you vacuum from the inside of the air ﬁlter, this will

reduce the effectiveness of the air ﬁlter.

CAUTION

•

Do not forget to install the air ﬁlter. If the projector is left without the air ﬁlter installed, dust may enter

the projector and cause dirty projected images.

When the air ﬁlter becomes damaged, be sure to replace it with a new one (sold separately). If the

projector is used with the air ﬁlter damaged, dust may enter the projector and cause dirty projected

images.

NOTE: The lamp will not light unless the air ﬁter cover is installed.

E-ꢂꢃ

Download from Www.Somanuals.com. All Manuals Search And Download.

Troubleshooting

When you think the projector may be out of order, please ﬁrst check the following matters before requesting repair.

Symptom

Please check this

Is the power cable connected?

Reference page

E-21

Power does not come on

•

E-42

E-43

E-45

E-40

Projection lamp does not light • Is the lamp burned out?

•

Is the lamp unit cover installed?

Is the air ﬁlter installed?

Is the internal temperature high? If so, the lamp will not

light to protect the projector from damage.

Is the lamp usage time in excess of 1500 hours?

Has the connected input been selected?

Is the cable of the connected equipment properly connected?

Have "Brightness" and "Contrast" of the "Image

adjustment" menu been set all the way to the minus side?

Have you checked the functions of the personal computer?

Is the projector set up properly?

E-42

•

E-23

There is no image

E-16, E-20

E-36

E-18

E-14

E-38

E-22

E-15

•

Image is distorted

Image is blurred

Has keystone correction been applied?

Has the focus been adjusted?

Is the projection distance within the range that can be

properly focused?

E-38

E-8

•

Has keystone correction been applied?

Is the lens cap attached?

E-37

E-28

–

The image ﬂickers

Please adjust "Phase" of the "Sync adjustment" menu.

Are the settings of the "Sync adjustment" menu suitable?

Please adjust "Phase" of the "Sync adjustment" menu.

Is the volume adjustment set to the minimum?

This sound is associated with the minute expansion or

shrinkage of the cabinet due to a change of the temperature.

It has no effect on performance or anything else.

Follow the instructions on the "Fault Protection" measures

page.

The image is out of adjustment

The color is not right

There is no sound

There is a snap sound

from the cabinet

E-40

The TEMP LED lights

•

E-45

The LAMP/COVER LED

lights in red

•

Is the air ﬁlter disengaged?

E-43

Is the lamp unit cover disengaged?

E-42

Is the lamp usage time in excess of 1500 hours?

Is the battery exhausted? Or is it weak?

Is the remote control IR sensor exposed to illumination or

other light?

E-4, E-13

E-13

The remote control will

not work

E-13

E-37

•

Is the remote control IR sensor blocked?

Is an inverter device located close by?

At the time of personal

Please adjust using the "Sync adjustment" menu.

computer input selection, the

position of the video is shifted,

or the display is compressed

E-ꢂꢄ

Download from Www.Somanuals.com. All Manuals Search And Download.

Repair Service

Repair Service Procedure

•

Before asking for repair service, check the Troubleshooting section on page E-46 once more. If this check conﬁrms a prob-

lem, contact the dealer where you bought the product.

•

When asking for repair service, provide your dealer with the following information:

Description of the problem (as many details as possible)

Date of purchase

Your Name

Your Address

Telephone number

Product name and model No. (written on the label at the bottom of the projector)

E-ꢂꢅ

Download from Www.Somanuals.com. All Manuals Search And Download.

Speciﬁcations

Model Name

iP-60E

Type

3 primary Color LCD Shutter Projection Type

1.0 inches x 3 Panels, Aspect Ratio 4:3

LCD Panel Size

Drive System

Poly Silicon TFT Active Matrix with Micro Lens Array

Number of Pixels 786,432 pixels (1,024 x 768 dots)



Arrangement

Projection Lens

Optical Source

Image Size

Stripe

Manual Zoom: 1 to 1.25x, f=36.5 mm to 45.6 mm, F1.7 to 2.2

270W Super High-pressure Mercury Lamp

32-300 inches diagonal (projection distance 1.4 to 13.9 m)

Full color (16,770,000 colors)

Color Reproducibility

Brightness

3500 ANSI lumens

Scan Frequency

Horizontal 21 to 80 kHz, Vertical 50 to 85 Hz

Maximum Resolution (At RGB signal input)

1,024 768 dots (Compressed display of 1,600 1,200 dots is possible.)



OHP

Scanner

Total number of pixels: 4 million pixels CCD / Effective number of pixels: 3 million pixels

288 mm 216 mm (11.3 in 8.5 in)



Signal system

Video signal

Separate Signal System

(Analog

Analog: 0.7Vp-p/75

Ω

RGB Input) Sync Signal

Separate/composite: TTL Level (positive/negative)

Sync on green: 0.3 Vp-p (Negative)

Terminal Panel 15 pin Mini D-sub 2 ch

Video

Signal system

Input Terminal

Video signal

Sync Signal

NTSC/PAL/SECAM/PAL-N/PAL-M/NTSC4.43

RCA Pin Jack 1 ch, S-Video (Mini DIN4-pin) 1ch

Monitor

Output

0.7Vp-p/75

Ω

Separate TTL Level, Negative Polarity

Output Terminal 15 pin Mini D-sub 1 ch

Audio Signal

Input Terminal

Audio Signal

Input Terminal

Audio Signal

0.4Vrms/47K

Ω

Stereo Mini Jack 2 ch

Video

0.4Vrms/47K

Ω

RCA Pin Jack 1 ch

Monitor

Output

0.4Vrms/47K

Ω

Output Terminal Stereo Mini Jack 1 ch

1 system USB connector (Mini B type)

1 W 2 stereo

USB Connector*

Audio Output



Operating Range of Temperature and Humidity Temperature: 0 to 35°C (32 to 95°F), humidity: 20 to 80% (no condensation)

Power Source

100-120/220-240VAC , 50/60 Hz

Power Consumption

Input Current

410W (100-120V AC), 390W (220-240V AC)

4.7A (100-120V AC), 2.4A (220-240V AC)

External Dimensions (mm/in)

400 (W) 315 (D) 145 (H) /15.7 (W) 12.4 (D) 5.7 (H)



(not including protrusions, Including the cover)

7.3kg

Weight

Accessories

Power Cable (3 m/3.3 yd), Remote Control, iP-60E User's Manual, Battery (AA x 2), PC

connection cable, Lens cap, iP Viewer Software Quick Reference

UL Approved (UL 60950)

Regulation

Meets FCC Class A requirements

Meets EMC Directive (EN55022, EN55024, EN61000-3-2, EN61000-3-3)

* USB connectors are not guaranteed to work with all personal computers.

• Speciﬁcations and designs are subject to change without prior notice in order to improve the product.

LCD panels are inherently susceptible to pixel defects.

The speciﬁcations are subject to change without notice.

E-ꢂꢆ

Download from Www.Somanuals.com. All Manuals Search And Download.

Craftsman Lawn Mower 917388732 User Manual
Craftsman Welder 19620569 User Manual
Creda Cooktop GDW51 User Manual
Dual Portable DVD Player XDVD270 User Manual
Dukane Projection Television DVP505A User Manual
Duracell Power Supply MN 1400 User Manual
Electro Voice Speaker DL15W User Manual
Fellowes Paper Shredder SB 87Cs User Manual
GE Dehumidifier AHG30LH User Manual
GE Monogram Range ZDP486LDPSS User Manual