®
SUNDOME 10’x10’
Instructions apply to Part Number 2000000136
POLE ASSEMBLY PARTS
When You Are Ready To Set
Up Your Tent
– Select a level campsite clear of
rocks, branches and other hard
or sharp objects.
Part No. 9180B3141
(2) Main Tent
Poles
Part No. 9180B3161
(1) Rainfly
Pole
– Do not set up your tent under trees.
– For best results in windy conditions,
do not position the door of tent
into the wind.
Rainfly Part No. 9180B3131
Layout & Positioning
Connect Frame to Tent
1 of Tent, Pole Assembly 2 – Insert one end of main tent pole
onto pin of pin & ring system at tent
– Layout and position tent with door
corner. (illus. 3)
facing desired direction. (illus. 1)
– Go to opposite end of pole and
– Unzip door.
gradually apply pressure to the pole
– Stake down tent using the rings of the
forming an arch until you are able to
pin & ring system at the corners of the
insert the pin into the pole.
tent. Keep the floor taut. (illus. 2)
– Repeat for second pole. (illus. 4)
– Assemble frame poles by
interlocking shock-corded poles.
This will make two long poles.
– Insert the poles diagonally into pole
sleeves.The center of the poles should
cross forming an “X” in the middle of
tent. (illus. 1)
Assembled
poles
inserted
through
pole
sleeves
illus. 4
Tent frame set-up
illus. 1
illus. 3
Insert pole end onto
pin & ring
illus. 2
Tent stake through ring
Download from Www.Somanuals.com. All Manuals Search And Download.
|