TM
ELITE MONTANA 8 TENT
MODEL 2000001584
Fig. 2
Before you begin
Read all instructions before set up.
• Select a level site clear of rocks, branches, and other hard or sharp
objects, to install your tent.
WARNING: Keep clear of overhead power lines.
• Do not set up your tent under trees because of potential lightning
strikes or falling tree limbs in inclement weather.
• Secure with all stakes and guylines provided to prevent property
damage or personal injury.
Door
• For best results in windy conditions, position narrow end of tent into
the wind.
• Enlist the help of at least one other person to assist you when it is
time to assemble the tent.
2A
2B
Pole Descriptions
Pole
Pole
Pole
2C
Description
Qty. Dia.
Repair Kit Replacement Kit
Main Body Pole, black
Side Body Pole, grey
Rainfly Pole, black
Vertical Door Pole, black,
short w/rubber tips
2
2
1
11mm 501000539
9.5mm 501000540
11mm 501000539
6.3mm 501000543
6.3mm 501000543
501000549
501000548
501000549
Hinged, Rigid Door
1. Assemble Vertical Door Pole (shorter black pole with plastic tips);
then insert through zippered vertical pole sleeve on hinged side of
door. (Fig. 3)
1
1
501000545
501000545
2. Insert end of Vertical Door Pole into bottom hinge plate, apply
pressure to form a slight bow, then insert other tip of pole into top
hinge. Zip up vertical pole sleeve. (Fig. 4 & 5)
Door Pole, black,
long w/rubber tips
3. Assemble Door Pole (longer black pole with plastic cap tips); then
insert into zippered pole sleeve at top of door. (Fig. 6)
4. Insert end of Door Pole into top hinge plate, apply pressure to form
a bow, then insert other tip of pole into the bottom hinge. (Fig. 7)
5. Zip up pole sleeve to enclose Door Pole. (Fig. 8)
Self-Rolling Window Spring Descriptions
Color Code Description
Qty.
Length Replacement Part No.
Red
Yellow
2
1
360mm
550mm
5010000624
5010000626
Fig. 3
Fig. 4
Fig. 5
Vertical Pole
Sleeve
CAUTION: “Springs” may have sharp edges. Handle with care to avoid
injury. Keep out of reach of children.
Door Hinge
To Set Up Tent
1. Unfold tent and spread out on a clean, level surface with the door
facing the desired direction. (Fig. 1)
2. Assemble all poles by interlocking the shock-corded, sections
together.
3. Insert grey Side Body Poles through the grey trimmed sleeves on
both sides of tent; then insert black Main Body Poles through black
trimmed sleeves, in center of tent, forming a “X”. Make sure black
Main Body Poles overlap the grey Side Body Poles. (Fig. 1)
Fig. 7
Fig. 6
Top
Door
Pole
Sleeve
Hinge
Fig. 8
To Attach Rainfly
1. Insert black Rainfly Pole with through sleeve in underside of
Sleeves with Black Trim
Fig. 1
Sleeve with
Grey Trim
Rainfly. (Fig. 9)
2. Drape Rainfly over tent with Rainfly Pole centered above front door
Sleeve with
Grey Trim
& the dark blue vestibule flaps located in the front. (Fig 9)
Door
Fig. 9
Front of Tent
Rainfly Sleeve
Black, Shock-corded Main Body Poles
Grey, Shock-corded Side Body Poles
Rainfly
Black Rainfly
Pole
4. Insert end of each black Main Body Poles & grey Side Body Poles
into pins. (Fig. 2 & 2A)
5. Go to opposite end of each pole and gradually apply pressure to
each forming arches. Insert the pin into each pole end at the sides
and corners of tent. (Fig. 2 & 2A)
Door
6. Attach frame clips along edges of tent to the black Main Body Poles
& grey Side Body Poles. (Fig. 2B)
7. Stretch tent until taut, then secure metal loops located on both
sides and web loops located at four corners of tent with stakes.
(Fig. 2C)
(continued on other side)
Download from Www.Somanuals.com. All Manuals Search And Download.
|