Code Alarm Automobile Alarm CA 210 User Manual

CA 210 Owners Manual  
128-6530  
1 of 10  
Download from Www.Somanuals.com. All Manuals Search And Download.  
VALET SWITCH:  
The valet switch allows you to temporarily bypass the optional starter inhibit  
feature, eliminating the need to hand your transmitter to parking attendants or  
garage mechanics. When the system is in valet mode, the optional starter  
inhibit feature is bypassed, however the remote panic feature and remote  
door locks will remain operational.  
1. Enter the vehicle, and turn the ignition key to the ON position.  
2. Press and hold the valet push button switch until the dash mounted LED  
turns on solid. The system will remain in the valet mode.  
3. To return to normal operation, press and release the push button switch  
any time the ignition is on.  
NOTE: Always remember to return the vehicle to the valet OFF position. This  
will ensure that the optional starter inhibit feature remains active at all times  
MANUALLYOVERRIDINGYOUR SYSTEM:  
USING THE VALET SWITCH MANUAL OVERRIDE  
The optional starter inhibit feature can be deactivated without the use of the  
keychain transmitter. This is necessary, since you will need the ability to  
operate your vehicle if the transmitter is lost or its battery fails.  
1. Open the vehicle door.  
2. Turn the ignition key to the ON position.  
3. Within 5 seconds, press and release the valet switch.  
The optional starter inhibit feature will enter the (by-passed) mode. You can  
now start and operate the vehicle normally.  
Typically this override mode is used only if the transmitter has become  
inoperative.  
Page 3  
128-6530  
3 of 10  
Download from Www.Somanuals.com. All Manuals Search And Download.  
ELIMINATING THE NORMAL ARM/DISARM CHIRPS  
You can selectively eliminate the normal arm & disarm chirps by holding the  
transmitter button slightly longer when locking or unlocking. This will prevent  
the horn chirps for one arm or disarm cycle. If you find this inconvenient and  
wish to eliminate these chirps permanently, please check with your installation  
center.  
REMOTE PANIC OPERATION:  
The PANIC button on your keychain transmitter functions as a panic switch for  
use in emergency situations. To use remote panic;  
1. Press and hold the PANIC button on the keychain transmitter for 3 or more  
seconds. The horn will immediately start honking.  
2. To stop the honking, press and hold the PANIC button on the transmitter  
again for 3 seconds. If the button is not pressed, the horn will  
automatically stop honking after 30 seconds.  
NOTE: While in the panic mode, pressing and releasing the lock, or the  
unlock buttons will, if the option is installed, lock and unlock the doors  
respectively. While in the panic mode, anytime the unlock button is pressed,  
the panic feature will continue for the allotted 30 seconds, however, the vehicle  
will be unlocked allowing the vehicle to start.  
ADDITIONAL REMOTE FUNCTION CHANNEL 2  
The system has an optional feature, (Channel 2), that can be connected to the  
Trunk Release. To operate channel 2, press and hold the TRUNK button of  
your keychain transmitter for four seconds.  
Page 4  
128-6530  
4 of 10  
Download from Www.Somanuals.com. All Manuals Search And Download.  
CA-210  
SYSTEM FUNCTIONS AT A GLANCE  
DASH MOUNTED LED INDICATORS  
SLOW FLASHING  
OFF  
ON SOLID  
=
=
=
LOCKED  
UNLOCKED  
VALET MODE  
ALARM SIREN CHIRP INDICATION  
1 HONK*  
2 HONK*  
=
=
LOCK  
UNLOCK  
ALARM PARKING LAMP INDICATIONS  
1 FLASH  
2 FLASH  
=
=
LOCK  
UNLOCK  
© 2003 Code Systems, Inc  
128-6530  
5 of 10  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Code Systems, Inc. Limited Lifetime Warranty  
Code Systems Inc. (“CODE”) warrants to the ORIGINAL PURCHASER of this CODE  
vehicle security product (the “Product”), purchased from an authorized CODE dealer, that (except as  
provided below) should this Product under normal use and conditions, be proven defective in material  
or workmanship DURING THE LIFETIME OF THE VEHICLE IN WHICH IT WAS ORIGINALLY  
INSTALLED, such defect(s) will be repaired or replaced (at CODE’s option) without charge for parts  
directly related to repairs of the defect(s).  
Switches, indicator lights, and transmitter cases are similarly warranted to the original  
purchaser for a period of one (1) year from the date of purchase of the Product.  
CODE accessories, sold separately, are covered by the applicable warranty accompany-  
ing the accessory.  
This warranty is non-transferable, non-assignable and is voided when: (1) the Product is  
removed from the vehicle in which it was originally installed; or (2) the vehicle in which the Product  
was originally installed is transferred to another party.  
This warranty does not apply to any product damaged by accident, physical or electrical  
abuse, improper installation, alteration, or use contrary to its intended function, fire, flood, or other  
natural acts.  
In order for the Product to be repaired or replaced under the terms of this warranty, the  
defective Product must be returned to an authorized CODE dealer and accompanied by a copy of the  
retail sales receipt. The date of purchase and year, make and model of the vehicle in which the  
Product was originally installed must be clearly indicated on the sales receipt.  
This warranty is exclusive and CODE MAKES NO OTHER WARRANTIES EXPRESSED  
OR IMPLIED. ANY IMPLIED WARRANTIES, INCLUDING ANY IMPLIED WARRANTY OF MER-  
CHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE, SHALL BE LIMITED TO THE  
DURATION OF THIS WRITTEN WARRANTY. IN NO CASE SHALL CODE BE LIABLE FOR ANY  
CONSEQUENTIAL OR INCIDENTAL DAMAGES FOR BREACH OF THIS OR ANY OTHER WAR-  
RANTY, EXPRESS OR IMPLIED, WHATSOEVER.  
CODE does not warrant that the Product cannot be compromised or circumvented. THE EXTENT OF  
CODE’S LIABILITY UNDER THIS WARRANTY IS LIMITED TO THE REPAIR OR REPLACEMENT  
PROVIDED ABOVE AND, IN NO EVENT SHALL CODE’S LIABILITY EXCEED THE PURCHASE  
PRICE PAID BY THE ORIGINAL PURCHASER OF THE PRODUCT WITHOUT INSTALLATION  
LABOR.  
Some states do not allow the exclusion or limitation of incidental or consequential dam-  
ages, so the above limitation may not apply to you. This warranty gives you specific legal rights and  
you may also have other rights which vary from state to state  
128-6530  
6 of 10  
Download from Www.Somanuals.com. All Manuals Search And Download.  
CODE SYSTEMS, INC.  
1-800-421-3209  
128-6530  
7 of 10  
Download from Www.Somanuals.com. All Manuals Search And Download.  

Creek Audio CD Player CD43 mk 2 User Manual
Cub Cadet Tiller Series 390 User Manual
Cuisinart Blender CBT 700 Series User Manual
Curtis Stereo System RCD544 User Manual
Ecom Instruments Cell Phone 400 401 User Manual
Edimax Technology Switch ES 5224RS+ User Manual
Fisher Paykel Freezer F310L User Manual
Fluke Landscape Lighting 335D User Manual
GE Monogram Gas Grill Professional Outdoor Grills and Cooktop User Manual
GE Monogram Ventilation Hood ZV830SM User Manual