Cobra Electronics Cordless Telephone CP 705 User Manual

How To Use Your  
OPERATING INSTRUCTIONS FOR YOUR  
Cordless Telephone Model CP-705  
U.S. PATENT 4876709  
Introduction  
Thank you for your purchase of a Cobra® INTENNA® Cordless Telephone —  
the worlds first and only full-range-power cordless telephone without any  
external antennas!  
No more extending, bending, or breaking the telescopic metal antennas found  
on traditional cordless phones — your Cobra INTENNA conceals its antenna  
systems inside the handset and base, where they should be, out of your way.  
Now you can install your new Cobra INTENNA cordless phone virtually any-  
where. Without cumbersome external antennas to worry about, put your new  
phone anywhere a corded phone can go! Then enjoy the freedom of using  
your new cordless phone all over the house as well as outside in your yard.  
C O R D L E S S  
T E L E P H O N E  
Your new Cobra Model CP-705 is also the most technologically advanced  
cordless phone in Cobras new INTENNA series. It has ten selectable channels  
(the maximum number available) for optimum interference-free use. And its  
patented Cobra Clear Call® PLUS Circuitry with compander noise-reduction  
system ensures corded-phone sound quality.  
MODEL CP-705  
Please take a moment to review this booklet and become familiar with all of  
the many user-friendly convenience features built into your new Cobra INTEN-  
NA Cordless Phone.  
If you need further assistance installing or using your new phone, please call  
our toll-free consumer “hotline” at 1-800-COBRA 22 between 8:30 a.m. and  
5:00 p.m. (Central Time) Monday through Friday.  
Installation Information  
Your Cobra INTENNA Cordless Telephone without any external base or handset  
antennas offers many new installation choices compared to traditional cordless  
phones with telescopic antennas. Your new phone can be located under cabi-  
nets, next to lamps, on crowded countertops and in other tight spaces that were  
previously inaccessible to cordless phones.  
Maximum range is obtained by installing the base unit in the highest living area  
of your home. The location you choose must be near an electrical outlet and a  
telephone wall jack. (To minimize electrical interference, avoid plugging your  
cordless phone into the same electrical outlet that has a charging unit for a  
cordless vacuum, screwdriver or other electronic device.)  
(1)  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Operational Features  
Using Your Phone  
After charging the handset batteries overnight (at least 12 hours), use your  
Cobra INTENNA cordless phone like any corded phone. With Cobras AUTO  
STANDBY feature, just pick the handset up to answer or place a call.  
The following features offer state-of-the-art performance and the ultimate in  
user-friendly convenience with your new Cobra INTENNA cordless telephone.  
AUDIO PERFORMANCE  
ANSWERING/PLACING CALLS AT THE BASE WITH “AUTO STANDBY” and  
"AUTO ANSWER"  
Your Cobraphone has Clear Call® PLUS  
Circuitry with compander noise-reduction  
system for optimum audio performance  
without background noise.  
PHONE  
NUMBER  
DISPLAY  
WINDOW  
Activate AUTO STANDBY by pressing and releasing the TALK button on  
the handset. The TALK light will illuminate.  
AUTO STANDBY  
Return handset to base without pressing the TALK button. Now there  
will be no need to use the TALK button to answer a call unless you keep  
the handset away from the base for extended periods (see below). When  
the phone rings, just pick up and talk.  
TALK BUT-  
TON  
This feature enables answering and plac-  
ing calls just like a corded phone. (See  
page 4 for instructions on activating this  
feature.)  
TALK & BAT-  
TERY LOW  
INDICATOR  
BATTERY SAVER CIRCUITRY  
After placing or answering a call, return the handset to the base without  
pressing the TALK button; your phone automatically disconnects the  
call and resets the AUTO STANDBY feature.  
REDIAL  
BUTTON  
The handset of this phone may be kept on  
standby mode (TALK light OFF) for a few  
days at a time in a convenient location  
away from the recharging base. In this  
condition, it is ready to answer or place  
calls by pressing and releasing the TALK  
button. The duration of the battery saver  
feature will depend on your actual use of  
the phone in its remote location.  
FLASH  
BUTTON  
To place a call, lift the handset and press the TALK button. Listen for dial  
tone and dial the number.  
CHANNEL  
BUTTON  
Cobra  
REMOTE ANSWERING/PLACING CALLS (AWAY FROM THE BASE)  
The TALK indicator (the lighted TALK button) must be OFF when the  
handset is away from the base. The phone is now in STANDBY mode,  
ready to ring if a call is received.  
Note: A warning beep tone will sound  
(and the BAT indicator will flash) when the handset batteries need overnight  
recharging.  
Press and release the TALK button (the indicator will light) to answer or  
place a call.  
CHANNEL SELECTION  
Ten selectable transmitting/receiving channels (the maximum available) are built  
into your Cobra INTENNA for optimum interference-free use.  
Press and release the TALK button when finished with a call in order to  
“hang up” the phone.  
You may need to change channels if you experience interference (noise, static,  
or poor audio):  
With TALK light on, press and release the CHAN button on the handset  
to advance to a new channel. A series of beep tones (2 groups of 2  
beeps) will sound to indicate successful channel change.  
An alert tone (three beeps) will sound if a new channel is unavailable  
due to interference. In that case, move closer to your cordless base and  
try to change channels again.  
(4)  
(5)  
Download from Www.Somanuals.com. All Manuals Search And Download.  
OUT-OF-RANGE SIGNAL  
DIGITAL SECURITY CODING  
If three beeps are heard immediately after the TALK switch is pressed, the hand-  
set is too far away from the base. The handset and TALK indicator will automat-  
ically turn off. Move closer to the recharging base and then try your call again.  
Your Cobra INTENNA features digital security coding (in accordance with FCC  
regulations) to reduce the chance of interference from your neighbors’ cordless  
phones. These inaudible, electronic codes are transmitted automatically by  
your phone to establish a secure link between your cordless handset and base.  
POWER FAILURE RESET  
After a power failure in your home (or any time you unplug your phone from  
AC power and then reconnect it), you must return the cordless handset to the  
base for about five seconds. This automatically resets the matching digital secu-  
rity codes and returns the channel selector to its start-up setting.  
DISPLAY WINDOW  
Use the back of card on the handset (marked"DIGITAL CODING") to write your  
phone number. (Use the tip of a paper clip to pry off the protective plastic  
cover.)  
PULSE/TONE SWITCH  
FLASH  
Your Cobra INTENNA cordless phone can be used with any phone system  
because it is switchable from pulse to tone dialing (see switch on rear of the  
base) depending on which service you are using. When using pulse dialing,  
mixed PULSE and TONE dialing may be used (to access certain long-distance or  
computerized banking services, for example) by selecting PULSE with the base  
This feature briefly interrupts the phone line so that you may access some of the  
advanced features — like “Call Waiting” and “Three-Way Calling” — that may  
be offered at extra cost by your local telephone company. Press and release  
the FLASH button on the handset to answer a second phone call or place a  
conference call if you subscribe to these services.  
switch and then using the  
button on the handset to temporarily switch to  
TONE dialing. Hanging up resets to PULSE.  
HEARING AID COMPATIBILITY  
RINGER SWITCH  
Your cordless telephone handset is compatible with inductively coupled hearing  
aids.  
This ON/OFF switch (located at the rear of the base) controls your cordless  
handsets electronic ringer; no ring will sound in the OFF position.  
INTENNA SYSTEM  
®
SECUR-LOC  
The revolutionary, patented INTENNA hidden-antenna system is a Cobra exclu-  
sive. Now you own the worlds first and only full-range-power cordless tele-  
phone that conceals the handset and base antennas inside the phone and out of  
the way. No more traditional metal antennas to extend, bend or break. Cobras  
hidden antennas are perfectly matched to your phones microprocessor circuitry  
for optimum performance — and they offer the ultimate in user-friendly conve-  
nience.  
This exclusive Cobra electronic circuitry is an added security measure to pro-  
tect your phone line from being accidentally accessed by a neighbors cordless  
phone. Secur-Loc activates automatically every time your cordless handset is  
placed into its base.  
LAST NUMBER REDIAL  
Each time you dial, the phone number youre calling is automatically saved in a  
special REDIAL memory. To call that number again — especially useful after  
receiving a busy signal — press and release the REDIAL button on the handset  
and the number will be automatically redialed.  
(7)  
(6)  
Download from Www.Somanuals.com. All Manuals Search And Download.  
A Few Words About Cordless Phone Performance  
Rechargeable Battery Information  
Your Cobra INTENNA cordless phone uses radio transmission to communicate  
between the base and handset. It is thus subject to occasional interference—sta-  
tic or buzzing noises, for example. These conditions may be caused by electri-  
cal motors on household appliances, fluorescent lights, electrical storms and  
other sources.  
NOTE: Before using your new Cobra INTENNA cordless telephone for the first  
time, you must charge the batteries overnight (at least 12 hours) for optimum  
long-life conditioning of the nickel-cadmium rechargeable handset batteries.  
BATTERY RECHARGING  
When your cordless handset batteries need recharging, the following warning  
measures will remind you to immediately return the handset to the base for  
recharging (this normally requires at least 12 hours of continuous charging):  
These steps will enhance the maximum performance of your new phone:  
Change channels by pressing the CHAN button on the handset if you  
experience interference.  
1) The BAT indicator on the handset will flash.  
Don't cover the upper section of the cordless handset with your hand  
(see diagram #4). This may block the internal antenna located at the top  
of the handset, possibly reducing the phone's range and audio clarity.  
Always hold the handset at the middle or close to the bottom.  
2) A warning beep will sound while you are using the phone (this indicates  
you have only a few minutes of battery power remaining to complete  
your conversation before the phone disconnects).  
3) When the handset has been away from the base for a few days and is in  
need of recharging, the handset will beep in 30 second intervals for five  
minutes. Return handset to base for recharging.  
Diagram #4:  
Hold the  
cordless handset at the  
middle or bottom area  
of your phone for  
best performance.  
NOTE: The CHARGE indicator will remain on as long as the handset is in the  
base, even after the batteries are fully recharged. The batteries will not be  
damaged if the handset remains in the base continuously; the charging system  
is self-adjusting and will never overcharge the batteries.  
CORRECT  
INCORRECT  
REPLACING THE BATTERIES  
Routine use of your cordless phone may deplete the rechargeable batteries in  
three to four years (depending on actual level of usage). The batteries will need  
to be replaced when the handset no longer accepts recharging and will not  
function when the TALK button is pressed.  
Avoid resting the handset on your shoulder during conversations; this  
may also block the performance of the internal antenna.  
Don't plug your phone's power cord into an active AC outlet that also  
provides power for a major appliance or for charging units for cordless  
appliances (vacuums, screwdrivers, etc.) or other electronic devices.  
Replacement batteries are available from any Cobra service station or direct  
from Cobra (see accessories instructions/order form at the end of this booklet).  
To replace:  
Performance of your phone may be improved by uncoiling the base  
telephone cord (because the INTENNA hidden-wire antenna system is  
inside the phone cord).  
1) Remove the phone number display window and card.  
2) Remove screw in center recessed area.  
3) Use a coin in the slot at the top to carefully pry open front from back of  
handset.  
4) Carefully take off back of handset.  
5) Unplug the connector cord and discard old batteries.  
6) Position and connect new battery.  
7) Put back and front together so that hooks at bottom engage. Then apply  
pressure to both sections to reassemble.  
8) Replace screw in center of phone number section. Return card and window  
to area.  
9) Put handset in base charging well and allow batteries to charge 12 hours.  
(9)  
(8)  
Download from Www.Somanuals.com. All Manuals Search And Download.  
For technical assistance, please call our Automated Help Desk which can assist you by  
answering the most frequently asked questions about Cobra products.  
Troubleshooting Guide  
If your cordless phone does not seem to operate properly, please check the fol-  
lowing and refer to the appropriate sections in this booklet for detailed informa-  
tion:  
(773) 889-3087  
24 hours a day, 7 days a week.  
A Consumer Service Representative can be reached through  
this same number 8:00 am - 8:00 pm, Monday through Friday, CST.  
Technical assistance is also available on-line in the Frequently Asked Question (FAQ)  
The phone is dead; no indicator lights are on: Are the power cord  
and telephone cord connected?  
IF YOU THINK YOU NEED SERVICE CALL 1-773-889-3087  
Handset beeps during conversations or when away from the base: The  
batteries need recharging; return the handset to the base for overnight re-  
charging.  
“If your product should require factory service please call Cobra first before send-  
ing your unit in. This will ensure the fastest turn-around time on your repair.”  
You may be asked to send your unit to the Cobra factory. It will be necessary to  
furnish the following in order to have the product serviced and returned.  
1. For Warranty Repair include some form of proof-of-purchase, such as a  
mechanical reproduction or carbon or a sales receipt. If you send the origi-  
nal receipt it cannot be returned.  
2. Send the entire product. For example—must include base, handset, cords  
and power adapter furnished with the product.  
3. Enclose a description of what is happening with the unit. Include a typed or  
clearly printed name and address of where the unit is to be returned.  
Hearing poor audio or added interference during calls: Dont cover the  
top  
section of the handset with your hand or rest the phone on your  
shoulder. This blocks the special internal Cobra INTENNA handset an-  
tenna.  
Handset disconnects, loses performance and/or beeps three times when  
in use away from the base: You may be out of range or your batteries  
may need recharging. Move closer to the base and/or recharge batteries.  
Unable to make a call due to interference: Move center closer to the  
base unit and change channels.  
4. Pack unit securely to prevent damage in transit. If possible, use the original  
packing material.  
5. Ship prepaid and insured by way of a traceable carrier; such as United Parcel  
Service (UPS) or First Class Mail; to avoid loss in transit to Cobra Factory  
Service, Cobra Electronics Corporation, 6500 W. Cortland St., Chicago, IL  
60707.  
6. If the unit is in warranty, upon receipt of your unit it will either be repaired or  
exchanged depending on the model. Please allow approximately 3 to 4  
weeks before contacting us for status. If the unit is out of warranty a letter will  
automatically be sent informing you of the repair charge or replacement  
charge. If you have any questions, please call 1-773-889-3087 for assistance.  
Handset wont work after a power outage or after disconnecting phone  
from AC power and then reconnecting it: Return the handset to the  
base for about five seconds to automatically reset the security coding and  
channel selector.  
REGISTERED WITH THE FCC  
Please note: This cordless telephone operates under part 15 and part 68 of FCC  
rules. Operation is subject to two conditions: 1) It may not interfere with radio  
communications, and 2) It must accept any interference received, including that  
which may cause undesirable operation. See the Operational Features section of  
this booklet for ways to reduce interference.  
Your telephone company is required by the Federal Communications  
Commission to allow you to connect FCC registered telephones to their lines.  
The FCC requires you to provide information, if requested by the local telephone  
company, about the connection of an FCC registered telephone to their lines.  
They may ask you for the FCC registration number and ringer equivalence num-  
ber (REN), both of which are on the bottom of the base. They may also ask for  
the Universal Service Order Code (USOC) number which is RJ-11C. It is illegal  
to use this phone on a party line or to connect it to a coin-operated telephone.  
(10)  
(11)  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Limited One-Year Warranty  
Cobra Cordless Phone Accessories  
Description  
Part No.  
Cost Ea. X Qty.  
=
Amount  
Cobra Electronics Corporation warrants that its Cobra cordless telephone prod-  
ucts, and the component parts thereof, will be free of defects in workmanship  
and materials for period of one (1) year from the date of first consumer purchase.  
This warranty may be enforced by the first consumer purchaser provided that the  
product is utilized within the U.S.A.  
Cobra will, without charge, repair or replace, at its option, defective cordless  
telephone products or component parts upon delivery to the Cobra factory  
Service Department, accompanied by proof of the date of first consumer pur-  
chase, such as a duplicated copy of a sales receipt.  
BATTERY PACK ASSEMBLY WITH CONNECTOR  
For use with model CP-705  
213-013-9-001  
$15.00  
AC POWER ADAPTER  
For use with model CP-705  
545-078-N-001  
545-055-N-001  
$10.00  
$20.00  
EXTRA CHARGING CRADLE (IVORY ONLY)  
For use with CP-705  
You must pay any initial shipping charges required to ship the product for war-  
ranty service. The return charges will be at Cobras expense if the product is  
repaired or replaced under warranty. For further details concerning procedures  
for obtaining service, see the “If You Think You Need Service” section of this  
Owners Manual.  
Exclusions: This limited warranty does not apply 1) to any product damaged by  
accident, improper line voltage or weather related circumstances; 2) in the event  
of misuse or abuse of the product or as a result of unauthorized alterations or  
repairs; 3) to non-defective original equipment Nickel Cadmium rechargeable  
batteries; 4) if the serial number has been altered, defaced or removed; or 5) if  
the owner of the product resides outside the U.S.A.  
(Prices subject to change without notice)  
Amount  
★★ Illinois residents add 7%  
★★ Cook Co. residents add .75% (7.75% total)  
★★ Chicago residents add 1% (8.75% total)  
★★ Indiana residents add 5%  
★★ Michigan residents add 4 %  
★★ Minnesota residents add 6%  
★★ Ohio residents add 6%  
(Tax if applicable)  
Shipping//handling  
Total  
$3.75  
★★ Wisconsin residents add 5%  
All implied warranties, including warranties of merchantability and fitness for a  
particular purpose, are limited in duration to the length of this warranty.  
Cobra shall not be liable for any incidental, consequential or other damages,  
including, without limitation, damages resulting from loss of use or cost of instal-  
lation.  
Make check or money order (no stamps) payable to:  
Cobra Accessories Dept.  
Some states do not allow limitations on how long an implied warranty lasts  
and/or do not allow the exclusion or limitation of incidental or consequential  
damages, so the above limitations may not apply to you.  
6500 W. Cortland St., Chicago, IL 60707  
Call 1-773-889-3087 or FAX 1-773-622-2269 (for credit card orders)  
This limited warranty gives you specific legal rights, and you may also have other  
rights which vary from state to state.  
Allow 4 to 6 weeks for delivery. Offer valid in Continental U.S. only.  
Cobra Electronics Corporation  
6500 W. Cortland Street  
Chicago, Illinois 60707  
Please print clearly:  
Name  
Address (Not P.O. Box)  
In addition to its exclusive series of Intenna cordless telephones and answer-  
ing systems, Cobra is also one of Americas leading brands of  
City  
State  
Zip  
Exp. Date  
CB radios and accessories, and Safety Alert® radar/laser detectors.  
Credit Card No.  
Customer Signature  
Circle One:  
Visa  
MasterCard  
Discover  
(12)  
Download from Www.Somanuals.com. All Manuals Search And Download.  
FOLD HERE  
Important Safety Instructions  
When using your telephone equipment, basic safety precautions should always be  
followed to reduce the risk of fire, electric shock and injury to persons, including  
the following:  
1. Read and understand all instructions.  
2. Follow all warnings and instructions marked on the product.  
3. Unplug this product from the wall outlet before cleaning. Do not use liquid  
cleaners or aerosol cleaners. Use a damp cloth for cleaning.  
4. Do not locate base unit near water, for example, near a bath tub, wash bowl,  
kitchen sink, or laundry tub, in a wet basement or near a swimming pool.  
5. Do not place this product on an unstable cart, stand or table. The product  
may fall, causing serious damage to the product.  
6. Slots and openings in the cabinet and the bottom or back are provided for  
ventilation, to protect it from overheating; these openings must not be  
blocked or covered. The openings should never be blocked by placing the  
product in the bed, sofa, rug or other similar surface. This product should  
never be placed near or over a radiator or heat register. This product should  
not be placed in a built-in installation unless proper ventilation is provided.  
7. This product should be operated only from the type of power source indi-  
cated on the marking label. If you are not sure of the type of power supply  
to your home, consult your dealer or local power company.  
COBRA ELECTRONICS CORPORATION  
6500 West Cortland Street  
Chicago, IL 60707  
8. Do not allow anything to rest on the power cord. Do not locate this product  
where the cord will be abused by persons walking on it.  
9. Do not overload outlets and extension cords as this can result in the risk of  
fire or electric shock.  
10. Never push objects of any kind into this product through cabinet slots as  
they may touch dangerous voltage points or short out parts that could result  
in a risk of fire or electric shock. Never spill liquid of any kind on the prod-  
uct.  
11. To reduce the risk of electric shock, do not disassemble this product, but take  
it to qualified servicemen when service or repair work is required. Opening  
or removing covers may expose you to dangerous voltages or other risks.  
Incorrect reassembly can cause electric shock when the appliance is subse-  
quently used.  
12. Avoid using telephone (other than a cordless type) during an electrical storm.  
There may be a remote risk of electric shock from lightning.  
13. Do not use the telephone to report a gas leak in the vicinity of the leak.  
(OVER)  
PRINTED IN THE MALAYSIA  
© COBRA ELECTRONICS CORPORATION 1997  
480-076-P-001  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Important Safety Instructions (continued)  
14. Unplug this product from the wall outlet and refer servicing to qualified ser-  
vice personnel under the following conditions:  
A. When the power supply cord or plug is damaged or frayed.  
B. If liquid has been spilled into the product.  
C. If the product has been exposed to rain or water.  
D. If the product does not operate normally by following the operating in-  
structions. Adjust only those controls that are covered by the operating in-  
structions because improper adjustment of other controls may result in  
damage and will often require extensive work by a qualified technician  
to restore the product to normal operation.  
E. If the product has been dropped or the cabinet has been damaged.  
F. If the product exhibits a distinct change in performance.  
The cordless handset operates on batteries, please read and follow instructions:  
A. Use only the battery pack supplied with the unit:  
3.6 volt, 270 mAh, rechargeable nickel-cadmium battery pack.  
B. Do not dispose of battery pack in a fire. The cells may explode. Check  
with local codes for possible disposal instruction.  
C. Since released electrolyte is corrosive and may cause damage to eyes or  
skin and may be toxic if swallowed:  
C1. Do not open or mutilate battery pack.  
C2. Always replace the entire battery pack rather than reusing one or  
more cells.  
C3. Do not expose batteries to heat or flame.  
D. Exercise care in handling the battery pack in order not to "short" the bat-  
tery contacts with conducting materials such as rings, bracelets, and keys.  
The battery or conductor may overheat and cause burns.  
15. Never install telephone wiring during a lightning storm.  
16. Never install telephone jacks in wet locations unless the jack is specifically  
designed for wet locations.  
17. Never touch uninsulated telephone wires or terminals unless the telephone  
line has been disconnected at the network interface.  
18. Use caution when installing or modifying telephone lines.  
Save These Instructions  
Download from Www.Somanuals.com. All Manuals Search And Download.  

Contemporary Research TV Receiver IP HDVR User Manual
Cooper Lighting Indoor Furnishings BRC User Manual
Craftsman Blower 74822 User Manual
Creda Cooktop CB01E User Manual
Crown Audio Music Mixer IQ USM 810 User Manual
Crown Audio Stereo Amplifier SST 4622 User Manual
Dell Server 35XX User Manual
DLO MP3 Docking Station JukeBox User Manual
Edimax Technology Digital Camera IC 1000 User Manual
Euro Pro Convection Oven TO31 User Manual