Cobra Electronics Automobile Battery Charger CJIC 250 User Manual

CJIC 250  
Introduction  
1
2
3
Thank you for purchasing the Cobra CJIC 250  
jump starter/power pack with built-in air  
compressor. Properly used, this Cobra product  
will give you many years of reliable service.  
Easy-to-use and designed for reliable  
service, the 100W Mobile power pack can  
run many AC appliances and 12V DC  
appliance whenever you need power for  
work or play, at home or on the road.  
Jump Starter/PowerPack  
with Air Compressor  
Operating Instructions  
The Cobra line of quality products includes:  
CB Radios  
®
microTALK Radios  
Important: Please be sure to read and save  
the entire manual before using your mobile  
power pack. Any misoperation or misusing  
may damage the equipment or create  
hazardous conditions for the user. Please  
keep this manual for future reference.  
Radar/Laser Detectors  
®
Safety Alert Traffic Warning Systems  
®
HighGear Accessories  
®
CobraMarine VHF Radios  
What’s Included with Your CJIC 250  
Power Inverters  
Accessories  
1. Power pack with jump start cables with  
built-in air compressor  
2. 120V AC charging adapter  
3. Owner’s operating instructions  
4. Inflation nozzles  
For more information or to  
order any of our products,  
please visit our website:  
4
©2009 Cobra Electronics Corporation  
Version C  
®
Printed in China  
Nothing Comes Close to Cobra  
Part No. 480-549-P  
A1  
Download from Www.Somanuals.com. All Manuals Search And Download.  
How to Use Your  
Cobra CJIC 250  
Contents  
Introduction...........................................................................................A1  
Our thanks to you  
Features of This Product  
• 100W AC output for operating  
household appliances  
What’s included  
Buttons, Switches & Indicators..................................................A2  
Customer Assistance......................................................................A3  
Conventions ........................................................................................2  
Safety Information ............................................................................3  
Controls and Indicators...................................................................6  
Operation..................................................................................................8  
AC appliances......................................................................................8  
Operating AC appliances................................................................9  
Some devices you can power up.................................................9  
Low battery shut down....................................................................9  
Overloads & high temperature protection..............................9  
High surge appliances......................................................................9  
Problem appliances .......................................................................10  
12V DC appliances ..........................................................................10  
Operating DC appliances..............................................................10  
USB devices........................................................................................11  
Using the Air Compressor............................................................11  
Inflating tires ....................................................................................12  
Inflating small sports equipment .............................................13  
Jump starting a vehicle’s engine................................................14  
Recharging the power pack battery.........................................15  
Troubleshooting...................................................................................16  
Specifications .......................................................................................18  
Product service....................................................................................19  
Warranty Information.......................................................................20  
• 260 PSI air compressor  
• 12 Volt DC power outlet for DC  
accessories & appliances  
• LED super bright emergency  
light  
• 5V USB port to power up or  
charge cellphones, PDAs or  
consumer electronic devices  
• 1200 Watt (300A) instant  
starting power to start vehicles  
• Rechargeable internal battery  
• LED display indicates the  
battery capacity  
• Reverse polarity connection  
indication & alarm  
• On/off safety switch  
• Heavy duty cables and clamps  
1
Download from Www.Somanuals.com. All Manuals Search And Download.  
Introduction  
Introduction  
Important Safety Instructions  
WARNING: Charge unit fully prior to use.  
Important: Please be sure to read and save the entire manual before using your  
mobile power pack. Any misoperation or misusing may damage the equipment  
or create hazardous conditions for the user. Please keep this manual for future  
reference.  
Keep unit clear of fire and water. The 100W mobile power pack is not  
intended for use in connection with life support systems or other medical  
equipment or devices.  
WARNING: Shock hazard.  
Keep away from children. The power pack generates the same potentially  
lethal AC power as a normal household wall outlet. Do not insert foreign  
objects into the AC outlet, the DC power pack socket, the jump start cable  
port, or the ventilation hole, do not expose this product to water, rain, snow,  
condensation, or spray. Do not open the power pack expect to replace the  
internal battery. Have a qualified technician perform any service work.  
The following conventions are used in this manual:  
WARNING Warnings identify conditions that could result in personal  
injury or loss of life.  
CAUTION Cautions identify conditions or practices that could result  
in damage to the unit or to other equipment.  
WARNING: Explosion hazard  
Do not use this product where there are flammable fumes or gases, such as  
in the bilge of a gasoline-powered boat, or near propane tanks. Do not use  
this product in an enclosure containing automotive-type lead-acid batteries.  
These batteries, unlike the sealed AGM battery in power pack, vent explosive  
hydrogen gas which can be ignited by sparks from electrical connections.  
When working on electrical equipment, always ensure someone is nearby to  
help you in an emergency.  
NOTE: These notes describe an important action item or an item that you  
must pay attention to.  
Abbreviations and Acronyms:  
A
Ampere  
WARNING: Heated surface  
AC  
Ah  
DC  
LED  
mA  
V
Alternating Current  
Amp-hours  
Direct Current  
light-emitting diode  
milli-Ampere  
Volt  
Ensure at least 2(5cm) air space is maintained on all sides of the power  
pack. During operation, keep away from materials that may be affected by  
high temperatures such as blankets, pillows and sleeping bags.  
WARNING: Fire hazard  
Never allow jump start cablesred and black clamps to touch each other or  
another common metal conductor. This could cause damage to the unit  
and/or create a sparking/explosion hazard. Always disconnect the jump start  
cables from the unit after use and clip the plastic guard over the jump start  
cable port.  
Jump start cable clamps must be connected positive to positive (red clip to  
battery+”) and negative to negative (black clip to battery “-“or engine  
ground). A reverse polarity connection (positive to negative) may cause  
damage to the unit and/or create a sparking/explosion hazard.  
W
Watt  
2
3
Download from Www.Somanuals.com. All Manuals Search And Download.  
Introduction  
Introduction  
7. Someone should be within range of your voice, or close enough to come to  
your aid when you work near batteries.  
WARNING: Fire hazard  
The jump start feature is designed for short term operation only- less than 5  
seconds. Operating the jump start feature for more than 5 seconds may  
cause damage to the unit. Allow the power pack to cool down for at least 3  
minutes after each jump start.  
8. Have plenty of fresh water, soap and a supply of baking soda on hand in  
the area of the batteries in case of contact with battery acid. Baking soda  
neutralizes lead acid battery electrolyte.  
WARNING: Risk of explosion, fire or burns  
9. The product is supplied with a rechargeable, sealed lead acid battery. This  
battery is self contained and not consumer replaceable. Batteries must be  
disposed of properly when they no longer hold a charge. Proper charging  
practices will increase the life of the batteries.  
The battery terminals exposed at the jump start cable port have enough  
energy present to cause a spark, creating an explosion hazard, or to cause  
burns if a metal object contacts both terminals. Always clip the plastic guard  
over the port when not in use.  
For information on battery recycling call toll free 800-822-8837.  
CAUTION: Equipment damage  
Do not expose the power pack to temperatures over 104° F(40° C) or under  
14° F(-10° C).  
Precautions when working with batteries  
WARNING: Explosion and fire hazard  
1. Follow all instructions published by the battery manufacturer and the  
manufacturer of the equipment in which the battery is installed.  
2. Make sure the area around the battery is well-ventilated.  
3. Never smoke or allow a spark or flame in vicinity of the engine or  
batteries.  
4. Be careful not to drop a metal object on the battery or allow a metal tool  
to simultaneously touch the positive and negative cable ends or battery  
terminals. It might spark or short-circuit the battery or other electrical  
parts and cause an explosion.  
5. Remove personal metal items such as rings, bracelets, necklaces, and  
watches when working with batteries. Batteries produce a short-circuit  
current high enough to weld a ring or other similar objects to metal,  
causing a severe burn.  
6. If you need to remove a battery, always remove the negative terminal  
from the battery first. Make sure all accessories are off so you don’t cause  
an arc.  
4
5
Download from Www.Somanuals.com. All Manuals Search And Download.  
Introduction  
Controls and Indicators:  
Introduction  
Red LED indicates jump start connection to battery  
9. Reverse polarity  
indicator  
is incorrect.  
1. USB power port  
Provides 5 volts output for consumer  
electronics devices.  
10. 120V AC power  
switch  
When this switch is on, the 120V AC is available at  
the 120V AC socket.  
2. USB power indicator Illuminates when USB port is in use.  
11. 120V AC socket  
12. LED lights  
Power outlet for AC accessories.  
3. USB/LED power switch If the switch is flipped left, the USB port can  
provide power. Flipped right, the white LED lamps  
illuminate. Center position, the USB port and LED  
lamps are off.  
Four white LED lights for emergency use.  
Easy-access output port to charge 12V accessories.  
13. 12V DC socket  
Note: The unit contains 15A fuse for over current protection.  
Note: It is recommended that you use the unit to power 12V accessories less  
4. Charging indicator  
2-color LED indicator. When the battery is being  
charged, this LED indicator lights red, when the  
battery is fully charged, the LED indicator lights  
green.  
than 8A.  
14. Jump start power  
switch  
Turn this switch after connecting to vehicle to  
jump start battery.  
15. Red battery clamp  
Positive connector for jump starts.  
5. Charging jack  
Charge the battery in the unit by inserting the  
connector from the AC charging adapter into this jack.  
16. Black battery clamp Negative connector for jump starts.  
Note: Be sure that the jump start switch is in off position prior to connecting  
clamps to vehicle’s battery. Attach clamps properly to battery (red to positive post,  
and black to negative chassis ground) before turning jump start switch to on.  
6. Battery level indicators:  
Battery Value  
U<12.2V  
Display Mode  
Only red LED indicator lights.  
Red and yellow LED light.  
17. Portable handle  
For convenient handling of unit.  
12.2V<U<12.4V  
12.4V<U<12.6V  
U>12.6V  
18. AC charging adapter: Input voltage: 120V AC  
Output voltage: 13.5V DC  
Red, yellow and one green LED light.  
Red, yellow and two green LED all light.  
Input current: 0.3A  
19. 260 PSI air  
compressor  
Use to inflate tires and small sports equipment.  
Note: It is recommended that you should check the battery voltage every 30  
minutes during charging.  
Note: It is recommended that you charge the interior battery using the AC  
charging adapter, which offers charge protection.  
7. Battery level button When pressed, indicates the battery charge levels.  
8. Battery connection Green LED indicates connection to a battery  
indicator  
is correct.  
6
7
Download from Www.Somanuals.com. All Manuals Search And Download.  
Operation  
Operation  
Some devices you can power up:  
CAUTION: Read all operating instructions before operating the power pack.  
The power pack is not intended for use as a UPS (Uninterruptible Power  
Supply). The unit should be operated only in locations that meet the  
following requirements:  
• 13TV  
• Video Game System (20W)  
• Weather Radio (10W)  
(80W)  
Dry  
Don’t allow water or other liquids to drop or splash on the unit.  
Operating AC appliances  
1. Check battery status to ensure the battery is fully charged.  
Cool  
Ambient air temperature should be between -10° and 40° C  
(14° and 104° F) – the cooler the better within this range.  
Ventilated  
Safe  
Leave at least 2(5 cm) clearance around the unit for air flow.  
Ensure that the ventilation openings are not obstructed.  
2. Open the AC Outlet cover.  
3. Turn the AC socket switch ON.  
Do not operate the unit in the same compartment as batteries  
or in any compartment capable of storing flammable liquids  
like gasoline.  
4. Plug the AC appliance into AC outlets.  
5. Turn the AC appliance ON.  
Protect from Do not operate the unit where it will be exposed to battery  
battery gases gases. These gases are very corrosive and prolonged exposure  
will damage the power pack  
6. Recharge the power pack immediately after use. See “recharging the  
power pack battery(page 12).  
Low battery shut down  
Unit will automatically shutdown when the battery reaches 10.0V DC. You must  
turn off the AC power switch and charge the battery.  
AC appliances  
The power pack has one grounded AC power outlet for use with AC  
appliance. You can either plug the appliance directly into the AC outlet or you  
can use an AC power bar to increase the number of outlets available.  
Overload and high temperature protection  
In the event of an overload (>100W) or overheating, the power pack  
automatically shuts down power to the AC outlets. If, after a while the audible  
warning is ignored and a manual reset is not performed, the unit will do a  
complete shutdown automatically.  
However, for continuous operations, the combined loads must be less than  
80W. The less wattage used, the longer the power pack will operate before  
recharging is required.  
Operating range:  
• 80 watts or less for continuous operation  
• 100 watts for 5-minute operation  
Some appliance may be difficult or impossible to operate from the power  
pack. They may have high surge requirements or may be incompatible with  
the output waveform of the power pack. See “High Surge Appliancesand  
“Trouble Appliances(page 10).  
NOTE: To determine required wattage for a device, look up required Amps a  
device is rated. This Amperage is found on device I.D. tag in back of the unit.  
Multiply Amps X Volts = Watts.  
High surge appliances  
The wattage rating of AC appliance is the average power used by the appliance.  
Appliances such as televisions, computer monitors and appliances with motors  
consume much more power than their average rating when they are first  
switched on.  
Although power pack can supply momentary surge power up to 400W, some  
appliances may exceed the capabilities of the power pack and trigger the  
inverter’s safety overload shutdown circuit.  
8
9
Download from Www.Somanuals.com. All Manuals Search And Download.  
Operation  
Operation  
Problem appliances  
USB Devices  
The output of the power pack inverter is non-sinusoidal. Some equipment may  
be damaged by the inverter’s modified sine wave output (non-sinusoidal).  
Some appliance, including the types listed below, may be damaged if they are  
connected to the inverter.  
The power pack can charge or power one USB-chargeable device through its  
USB port. Compatible devices include most MP3 players, PDAs, digital  
cameras, and camcorders that have internal batteries which can be charged  
via the USB port of a desktop/laptop computer.  
Electronics that modulate RF (radio frequency) signals on the AC line will  
not work and may be damaged.  
USB-chargeable devices usually include a special USB cable (not supplied)  
that attaches one end to the USB port and the other end to the device.  
Speed controllers found in some fans, power tools, kitchen appliance, and  
other loads may be damaged.  
Using the Air Compressor  
Warning: Fire Hazard  
The compressor is designed for short-term operation only. Operating the  
compressor over an extended period of time will cause the compressor unit  
to overheat, which could lead to fire. Allow the compressor to cool down for  
10 minutes after each 10 minutes of continuous operations.  
Some chargers for small rechargeable batteries can be damaged.  
Metal halide arc (MHI) lights can be damaged.  
Note: If you are unsure about powering any device with the power pack,  
contact the manufacturer of the device to determine whether it is compatible  
with the modified sine wave output.  
Warning: Fire Hazard  
Do not leave the compressor unattended while in operation. Keep out of  
reach of children.  
12V DC appliances  
Warning: Risk of personal injury or damage of equipment  
The power pack can operate one 12V DC auto, RV, marine, or other portable DC  
appliance that draws 10 amps or less from its DC socket. The combined load  
must not exceed 120 W, The less combined wattage used, the longer the power  
pack will operate before recharging is required.  
Do not exceed the recommended pressure of either the compressor or the  
object being inflated. The compressor is capable of inflating to 260 PSI.  
If the recommended pressure is exceeded, an explosion may result.  
Warning: Risk of personal injury or damage of equipment  
Operating DC appliances:  
If the power pack with air compressor shuts off due to an over-temperature  
condition, turn OFF the compressor switch and allow the compressor to cool  
for 15 minutes before re-starting. If the power switch is not turned off, the  
compressor will automatically turn itself on when it reaches an acceptable  
operating temperature. If left unattended, it is possible that the unit can over-  
inflate the object being inflated and create an explosion hazard.  
1. Check battery status to ensure the battery is fully charged.  
2. Open the DC socket.  
3. Plug the DC appliance into the DC socket.  
4. Turn the DC appliance ON.  
Caution: Equipment damage  
5. Recharge the power pack immediately after use.  
The power pack with air compressor cannot be used to inflate large capacity  
inflatables such as float tubes, large air mattresses, transport truck tires, and  
inflatable boats. These types of products require extended inflating times,  
which may damage the compressor.  
Download from Www.Somanuals.com. All Manual1s1Search And Download.  
10  
Operation  
Inflating tires  
Operation  
Inflating small sports equipment  
Caution:  
You can use the compressor to inflate small sports equipment such as balls  
If the pressure gauge on the compressor indicates more than twice the  
recommended pressure for the object you are inflating and you have only  
started to inflate the object, the valve connector is incorrectly connected to  
the valve stem. This may damage the power pack with air compressor.  
Remove and reattach the valve connector to the valve stem.  
(soccer balls and footballs.)  
Caution:  
The unit cannot be used to inflate large capacity inflatables such as float  
tubes, large air mattresses, transport truck tires, and inflatable boats. These  
types of products require extended inflating times, which may damage the  
compressor.  
To inflate your vehicle, motorcycle, or bicycle tires:  
1. Locate valve connector.  
To inflate small sports equipment:  
1. Choose the appropriate nozzle adapter.  
2. Remove from storage and uncoil hose.  
3. Remove valve stem cap from tire to be inflated.  
4. Put the thumb latch in the OPEN position.  
2. If an adapter is required, insert the nozzle adapter into the valve  
connector, turning it clockwise to tighten, and close the thumb latch.  
3. Place the valve connector fully on the valve stem or into the valve  
receptacle on the item to be inflated.  
5. Insert the desired adapter into the valve connector.  
6. Place valve connector firmly and completely over valve stem on the tire.  
4. Turn the compressor ON and inflate to appropriate pressure.  
7. Press the thumb latch toward the house until it locks into the  
closed position.  
5. Turn the compressor OFF before removing valve connector from the  
valve stem.  
8. Insert into the valve receptacle on the item to be inflated.  
9. Press the compressor switch to turn the compressor ON.  
10. Inflate to desired pressure.  
6. Remove nozzle adapter from the valve connector and store in storage  
compartment of Accessory Bag.  
Caution:  
Allow the compressor to cool down for 10 minutes after each 10 minutes of  
11. Press the compressor switch to turn the compressor OFF.  
12. Remove the valve connector from the valve receptacle.  
13. Put the thumb latch in the OPEN position.  
14. Remove the adapter.  
continuous operation. Repeat if necessary.  
Note: Leave the thumb latch in the open position for storing to relieve  
pressure on the internal mechanism.  
15. Double-check the air pressure with a pressure gauge.  
16. Replace valve stem cap.  
17. Store the valve connector.  
13  
12  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Operation  
Operation  
To jump start a vehicle continued:  
7. Switch off the jump start power switch.  
8. Remove the red positive (+) clamp and then the black negative (-) clamp.  
Jump starting a vehicle’s engine  
You can use the power pack to jump start a vehicle (or boat engine) that has  
a 12V starting battery using the jump start cables supplied with the unit.  
WARNING: Fire Hazard  
Recharging the power pack battery  
A reverse polarity connection may cause damage to the unit and/or create a  
sparking/explosion hazard. Never allow cablesred and black clamps to touch  
each other or another common metal conductor. The connection of the  
cables to the vehicle’s battery terminals must be positive to positive (red  
clamp to battery+”) and negative to negative (black clamp to battery-“ or  
vehicle chassis).  
CAUTION: Do not operate AC or DC appliance while the power pack is  
being charged.  
Charging with the AC charging adapter  
Using the AC charging adapter is the simplest method for recharging the  
battery. While charging from an AC source, the charging status LED indicator  
will light red. When the battery has reached capacity, the indicator will light  
orange. Charging when the battery is fully discharged takes around 23 hours.  
NOTE: Carefully follow these instructions for jump starting your vehicle as  
they may be different from the instructions supplied with other jump start  
products or cables.  
NOTE: Recharge the 100W mobile power pack as soon as possible after each  
use. When not used the power pack, it should be recharged every 3 months!  
To jump start a vehicle:  
1. Turn off the vehicle and all accessories.  
To recharge with AC charger:  
1. Turn the rotary switch to the “OFFposition.  
2. Place the unit on a flat and stable surface near the battery which need to be  
started. Ensure that the unit’s jump start power switch isOFF.  
3. Connect the red positive (+) clamp of the cables to the positive (+)  
terminal of the engine battery.  
4. Connect the black negative (-) clamp of the cables to the engine block,  
cylinder head, or other stationary heavy metal part of the motor. If the red  
“Reverse PolarityLED illuminates, then reverse polarity has been detected.  
Correct polarity must be established before proceeding. Disconnect the  
jump starting clamps from the vehicle’s battery and repeat steps (3) and (4).  
5. Switch on the jump start power switch. Before starting the engine, make  
sure the jumpstarter pack and the cables are clear of the metal parts and  
other moving things.  
2. Plug AC charging adapter into charging jack on the front of the unit.  
3. Plug AC charging adapter into 120V AC electrical outlet.  
4. Continually charge until the battery is fully charged; for about 23 hours.  
CAUTION: The 23-hour charging time for the unit assumes that there is 120V  
at the AC wall outlet. If the voltage is less than 120V AC, it may take more  
than 23 hours to fully recharging. Once fully charged, the charging current  
automatically reduces to a floating charge mode, and the unit may be left  
permanently connected to the AC charger.  
6. Crank the engine for 5 seconds or until it starts, whichever is first.  
WARNING: Fire hazard  
Do not try to start the engine for more than 5 seconds. The jump start  
feature is designed for short term operation only. Operating the jump  
starting feature for more than 5 seconds may cause damage to the unit.  
Allow the unit to cool down for at least 3 minutes after each start attempt.  
14  
Download from Www.Somanuals.com. All Manual1s 5Search And Download.  
Troubleshooting  
Solution  
Troubleshooting  
Problem  
Cause  
Buzzing in audio systems and radios  
Some inexpensive stereo systems and AM-FM radios have inadequate internal  
power supply filtering and “buzzslightly when powered by the power pack.  
Generally, the only solution is an audio product with a higher quality filter.  
The power pack can not jump The battery in the power pack Charge it for at 23 hours  
start vehicle  
is not fully charged  
The engine start capacity  
exceeds the power pack jump  
start capacity.  
Television interference  
The power pack is shielded to minimize its interference with TV signals.  
However, with weak TV signals interference may be visible in the form of lines  
scrolling across the screen. The following should minimize or eliminate the  
problem:  
The power pack’s battery has Replace the power pack’s  
been damaged  
battery (consult service  
technician).  
The charging status LED  
indicator does not light.  
No AC power at the AC wall  
outlet.  
Ensure power is available at the  
AC wall outlet.  
Increase the distance between the inverter and the TV, antenna and cables.  
Adjust the orientation of the inverter television, antenna and cables.  
Maximize TV signal strength by using a better antenna and use shielded  
antenna cable where possible.  
AC charging adapter is faulty. Replace 120V AC charger  
The AC charger’s output is too Replace the AC charger  
The charging status LED  
indicator still lights red and has low.  
not charged to steady after 50  
hours of charging.  
WARNING: Electric shock hazard  
The AC appliance does not  
operate; audible alarm is not  
sounding.  
AC appliance rated more than Use AC appliance with a power  
Do not remove the cover of the unit or disassemble. The unit does not contain  
any internal user-serviceable parts and attempting to service the unit yourself  
could result in electrical shock or burn.  
80W, the safety overload has rating less than 80W.  
tripped.  
AC appliance rated less than AC appliance may exceed the  
80W, high starting surge has power pack’s surge capability.  
tripped the safety overload.  
Use an AC appliance with a  
starting surge within the power  
pack surge rating.  
Battery has discharged to 10V Recharge the battery.  
Inverter has overheated due to Allow the power pack to cool for  
poor ventilation or excessively 15 minutes or more. Clear  
warm environmental condition. blocked fan opening or remove  
objects covering the unit, then  
restart the power pack. Move to  
a cooler environment.  
Run time for appliance is less Internal battery is not fully  
Recharge using the AC charger,  
until the charging status LED  
indicator light green.  
than expected.  
charged,  
AC appliance power  
consumption is higher than  
expected.  
Check AC appliance power or  
wattage rating (or current draw  
for 12V DC appliance).  
17  
16  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Specifications  
12 DC Power:  
Internal battery (Capacity/Type)  
DC power socket (maximum continuous load) 8A with automatic reset  
Product Service  
For any questions about operating this new Cobra product, or if parts are  
missing…PLEASE CALL COBRA FIRST…do not return this product to the store.  
See customer assistance on page A3.  
7Ah/12V sealed lead-acid battery  
DC fuse  
15A  
If your product should require factory service, please call Cobra first before  
sending your unit. This will ensure the fastest turn-around time on your repair.  
You may be asked to send your jumpstarter/power pack to the Cobra factory.  
AC Power:  
Output power  
• Continuous AC output power  
• Five minute AC output power  
• AC output surge capacity  
80W  
100W  
400W  
It will be necessary to furnish the following to have the product serviced and  
returned.  
1. For warranty repair include some form of proof-of-purchase, such as a  
mechanical reproduction or carbon copy of a sales receipt. If you send the  
original receipt, it cannot be returned.  
Output voltage  
Output frequency  
104V-125V  
58Hz-62Hz  
Output wave form  
No load current draw  
Input voltage range  
Low battery shutdown  
Low battery shutdown resume  
High battery voltage shutdown  
Over temperature shutdown  
Overload shutdown  
Modified sine wave  
<0.5A  
2. Send the entire product.  
3. Enclose a description of what is happening with the jump starter/power  
pack. Include a typed or clearly printed name and address of where the unit  
is to be returned.  
10.5V-15.5VDC  
10.0 0.3VDC  
12.0 0.3VDC  
15.5V 0.3VDC  
Yes  
4. Pack unit securely to prevent damage in transit. If possible, use the original  
packing material.  
5. Ship prepaid and insured by way of a traceable carrier such as United Parcel  
Service (UPS) or Priority Mail to avoid loss in transit to:  
Yes  
Operating temperature range  
Storage temperature range  
14°F~104°F (-10°C~40°C)  
-4°F~158°F (-20°C~70°C)  
Cobra Factory Service  
Cobra Electronics Corporation  
6500 West Cortland Street  
Chicago, Illinois 60707 USA.  
Internal battery charging controller system:  
AC charging bulk charging current  
Peak charging voltage (nominal)  
300mA  
14.2V 0.2V  
12.9V 0.2V  
6. If the jumpstarter/power pack is in warranty, upon receipt of your unit, it  
will either be repaired or exchanged depending on the model. Please allow  
approximately three to four weeks before contacting Cobra for status. If the  
unit is out of warranty, a letter will automatically be sent informing you of  
the repair charge or replacement charge.  
Charging restart voltage (nominal)  
Air compressor:  
Inflation pressure  
260 PSI  
Physical Specifications:  
Jumpstarter cables (size/length)  
Dimensions H*W*D  
If you have any questions, please call 773-889-3087 for assistance.  
8.37mm2/(460 19.5)mm  
13.25” H x 12” W x 5.5” D  
(330.2mm x 309mm x 114.3mm)  
10 lbs., 5.6 oz. (4.7g)  
Weight  
18  
Download from Www.Somanuals.com. All Manual1s 9Search And Download.  

Craftsman Edger 5367722 User Manual
Curtis Digital Photo Frame DPF316 User Manual
Digi Switch Hubport 4 User Manual
Dynacord Stereo Amplifier Xa 4000 User Manual
Edirol MP3 Player R 09HR User Manual
Electro Voice Portable Speaker EVX 180A User Manual
Electro Voice Portable Speaker Skylark User Manual
Extron electronic Stereo Amplifier RGB 580XI User Manual
Fujitsu Air Conditioner AOVG09LLCA User Manual
Generac Power Systems Switch 004945 1 User Manual