INSTRUCTION
MANUAL
TRUE DAY/NIGHT
VARI-FOCAL COLOR DOME CAMERA
MODEL HDC211
Copyright © 2009 Clover Electronics U.S.A. All Rights Reserved.
Download from Www.Somanuals.com. All Manuals Search And Download.
4. If necessary, change the settings to get the best images depending on your application
by using the buttons in the camera (refer to the instruction manual for OSD control).
5. Assemble the transparent dome③ by turning the locking ring② clockwise. The
locking ring② should be securely fastened so that water can not leak into the camera.
6. Connect the one end of BNC cable (not supplied) to the BNC (F) of 5’ cable attached
to the camera and the other end (BNC) of cable to the video devices such as DVR,
monitor/TV. Plug an AC power supply (not supplied) to the DC jack (red) on the
camera.
Download from Www.Somanuals.com. All Manuals Search And Download.
Download from Www.Somanuals.com. All Manuals Search And Download.
HOW TO ADJUST ANGLE OF VIEW
1. Vari-focal lens①
Easily changeable angle of view: 2.8 to 12mm
2. T↔W (Tele ↔ Wide)③
Turn this adjustment knob③ clockwise or counter-clockwise to set the focal length.
3. ∞↔N②
Turn this adjustment knob② clockwise or counter-clockwise to set the focus.
4. After setting the focus and focal length, the adjustment knob② and ③ should be
securely fastened.
5. Do not stamp your fingerprint on the lens and dome, which may affect picture quality.
Download from Www.Somanuals.com. All Manuals Search And Download.
Note:
▪ Apply DC12V 1 A regulated power supply (not included).
▪ To avoid fire or shock hazard, use a UL listed power supply.
TROUBLE SHOOTING
If the camera does not function properly, check the following points before contacting the
service center.
Troubles
Remedies
No video
Check the AC adapter and video cable
between the camera and a monitor
Check the brightness control on the
monitor
Check if the lens is stained. If dirty,
clean it with soft and clean cloth
The image on the screen is dark
The image on the screen is dim
The camera is not working properly, and Check if you have connected the
the surface of the camera case is hot
The contrast on the screen is too weak
provided AC adapter
Adjust the contrast feature of the
monitor. If the camera is exposed under
too strong light, change the position
Does the camera face to directly to the
sunlight or fluorescent light? Change the
camera position
The image on the screen flickers
Picture rolls and jumps, scrambled
picture
Improper V-hold control. Setting on your
monitor
Picture smaller than screen
House current may be too low
Download from Www.Somanuals.com. All Manuals Search And Download.
SPECIFICATIONS
• Image sensor
• Total pixels
• Effective Pixels
• Scanning system
• O.S.D
1/3” SONY Super HAD CCD
811(H) x 508(V)
768(H) x 494(V)
2:1 Interlace
Available
• Backlight
• Resolution
• S/N (Y signal)
• Min.illumination
• White Balance
• Sense-up
Off / HSBLC / BLC selectable
550TV Lines(color),600TV Lines(B/W)
52dB (AGC Off, Weight On)
0.000006Lux(IR LED ON)
ATW / AWB / Manual / AWC→SET
Off / Auto / (Selectable limit x2 ~ x258)
Off / On (1~50 level adjustable)
Indoor / Outdoor / Off
• 3 DNR
• D-WDR
• D&N selection
• Digital zoom
• Hosing material
• Dome material
• Voltage
• Current consumption
• Lens
• Operating temperature/Humidity
• Storage temperature/Humidity
• Dimensions
Color / BW / Auto
On(x32) / Off
Die cast Aluminum alloy
Polycarbonate
AC 24V / DC 12V(Dual voltage)
480 mA( LED: On), 170 mA(LED: Off)
DC Auto Iris Varifocal Lens (2.8mm-12mm)
-10°C ~ +50°C. RH 95% Max.
-20°C ~ +60°C. RH 95% Max.
140 (Ф) x 100mm
• Weight
2 Lbs
LIMITED 2 YEAR WARRANTY
This warranty gives the original purchaser specific legal rights and you may also have
other rights, which vary from state to state. If our products do not function because of any
defect in material or workmanship, we will repair free of charges for 2 years on parts and
labor from the date of original purchase. This warranty does not cover modification,
abuse, incidental or consequential damages unless the state of owner’s residence specially
prohibits limitations on incidental or consequential damages.
Download from Www.Somanuals.com. All Manuals Search And Download.
HOW TO OBTAIN FACTORY SERVICE
1. Original purchaser must fill out a warranty card and mail it to the factory with model
number, serial number and the date of purchase.
2. We will repair or replace, and return to the owner the system under this limited
warranty.
3. Please pack the system carefully and securely using the original packing materials,
and send it prepaid and insured to: 13073 E. 166th St, Cerritos, CA 90703.
4. Please include a check for $20.00 to cover the cost of return postage and handling. If
the system is returned within the warranty period, please include a proof of purchase.
If the system is out of warranty, you will receive an estimate of the repair cost for
your approval before repair work will be begun.
AVAILABLE ACCESSORIES
CDR0460
CDR4450
CDR0860
CDR1660
CDR0850
CDR1650
CA100BP
ADT121500
Stand-alone 4 CH Digital Video Recorder (DVR)
Stand-alone 4 CH Digital Video Recorder (DVR)
Stand-alone 8 CH Digital Video Recorder (DVR)
Stand-alone 16 CH Digital Video Recorder (DVR)
Stand-alone 8 CH Digital Video Recorder (DVR)
Stand-alone 16 CH Digital Video Recorder (DVR)
100’ BNC/Power to BNC/Power Extension cable and coupler
AC Power Supply DC12V 1.5 A Regulated
PACKAGE INCLUDES
1-Day & Night Vari-focal Color Dome Camera
1-Hardware Accessories Kit
1-Instruction Manual
1-Instruction Manual for OSD Control
1-Warranty Registration Card
Download from Www.Somanuals.com. All Manuals Search And Download.
|