Owner’s manual
Mode d’emploi
INFORMATION FOR USERS:
CHANGES OR MODIFICATIONS TO THIS
ER WILL VOID THE WARRANTY AND WIL
9. ESPECIFICACIONES
Sintonizador FM
Preamplificador
Manual de instrucciones
Margen de frecuencias
Acción de control de bajos (30 Hz)……±13 dB
Acción de control de agudos (10 kHz)……±10 dB
Salida de línea (con CA, 1 kHz, 10 KΩ)…1,8 V
……87,9 MHz a 107,9 MHz
Sensibilidad utilizable……11 dBf
Sensibilidad de silenciamiento 50 dB
……17 dBf
Selectividad de canal alterno……75 dB
Separación estereofónica (1 kHz)……35 dB
Respuesta en frecuencia (±3 dB)
……30 Hz a 15 kHz
1. FEATURES
General
Tensión de alimentación
……14,4 V CC (10,8 a 15,6 V permisible)
Consumo……Menos de 15 A
Impedancia del altavoz
■ DIN Chassis with Detachable Co
■ Z-Enhancer with 3 Mode Sound
■
® FM Reception Syst
■ AM/FM Bands-1 AM, 3 FM/18 FM
■ Full Logic Tape Transport with T
■ Auto Reverse with Dual Azimuth
■ Auto Metal Tape EQ
……4 Ω (4 Ω a 8 Ω permisible)
Peso……3,52 lb. (1,6 kg)
Sintonizador AM
Margen de frecuencias
Dimensiones
……530 kHz a 1.710 kHz
Sensibilidad utilizable……25 µV
……7" (178 mm) Ancho × 2" (50 mm) Alto ×
6-3/32" (155 mm) Profundo
■ Multi-Color LC Display
■Contents
7"
2"
■ 2-Channel RCA Line Level Outpu
■ 180 W (45 W × 4) Maximum Powe
■ Infrared Remote Control
English
(178 mm)
(50 mm)
1. FEATURES..................................................................2
2. CONTROLS.................................................................3
3. BUTTON TERMINOLOGY..........................................4
4. CASSETTE PRECAUTIONS AND CARE ..................5
5. DCP (Detachable Control Panel)..............................5
6. REMOTE CONTROL...................................................6
7. OPERATION................................................................8
8. TROUBLESHOOTING ..............................................13
9. SPECIFICATIONS.....................................................14
Cassette
"
Lloro y trémolo (WRMS)……0,08%
Separación de canales (1 kHz)……45 dB
Relación señal/ruido
AX410
……70 µs (CrO2, FeCr, Metal):
58 dB
AM/FM CASSETTE
7-3/8"
2-1/4"
(58 mm)
WITH CD CHANGER CONTROL
Respuesta en frecuencia (± 3 dB)
120 µs (normal)……30 Hz a 18 kHz
70 µs (CrO2, FeCr, Metal)……30 Hz a 20 kHz
(188 mm)
•
■Table des matières
Français
RADIO AM/FM-LECTEUR CASSETTE
AVEC PILOTAGE DE CHANGEUR CD
•
RADIOCASSETTE AM/FM
CON CONTROL DE CAMBIADOR DE CD
Notas:
1. CARACTÉRISTIQUES..............................................15
2. COMMANDES.............................................................3
3. NOMENCLATURE DES TOUCHES .........................16
4. PRÉCAUTIONS ET ENTRETIEN DES CASSETTES.......17
5. CLAVIER DE COMMANDE AMOVIBLE (DCP) .......17
6. TÉLÉCOMMANDE....................................................18
7. FONCTIONNEMENT.................................................20
8. DÉPISTAGE DES PANNES......................................26
9. SPÉCIFICATIONS.....................................................27
Las especificaciones se adecúan a las normas EIA.
•
•
Amplificador de Potencia
Potencia máxima……180 W (45 W × 4 canales)
Potencia media continua
Con el propósito de introducir mejoras, las especifi-
caciones y el diseño del producto están sujetos a
cambios sin previo aviso.
……17 W × 4, en 4 Ω, 20 Hz a 20 kHz, 1%
THD
■Índice
Español
1. CARACTERÍSTICAS ................................................29
2. CONTROLES..............................................................3
3. NOMENCLATURA DE LOS BOTONES...................30
4. PRECAUCIONES Y CUIDADOS DE LOS CASETES......31
5. PANEL DE CONTROL DESMONTABLE (DCP) ......31
6. CONTROLADOR REMOTO......................................32
7. OPERACIÓN.............................................................34
8. SOLUCIÓN DE PROBLEMAS..................................41
9. ESPECIFICACIONES ...............................................42
Clarion Co., Ltd.
All Rights Reserved. Copyright © 2001: Clarion Co., Ltd.
Printed in China / Imprimé en Chine / Impreso en China
Veuillez
Cerciórese
PE-1712B
280-7581-00
2001/1 (D/C)
Download from Www.Somanuals.com. All Manuals Search And Download.
Owner’s manual
Mode d’emploi
INFORMATION FOR USERS:
CHANGES OR MODIFICATIONS TO THIS PRODUCT NOT APPROVED BY THE MANUFACTUR-
ER WILL VOID THE WARRANTY AND WILL VIOLATE FCC APPROVAL.
Manual de instrucciones
±13 dB
…±10 dB
…1,8 V
1. FEATURES
■ DIN Chassis with Detachable Control Panel
■ Z-Enhancer with 3 Mode Sound Selector
misible)
■
® FM Reception System
■ AM/FM Bands-1 AM, 3 FM/18 FM/6 AM Touchbutton Memory
■ Full Logic Tape Transport with True Function
■ Auto Reverse with Dual Azimuth Adjust
■ Auto Metal Tape EQ
m) Alto ×
■ Multi-Color LC Display
■Contents
2"
50 mm)
■ 2-Channel RCA Line Level Output with Fader Control
■ 180 W (45 W × 4) Maximum Power Output
■ Infrared Remote Control
English
1. FEATURES..................................................................2
2. CONTROLS.................................................................3
3. BUTTON TERMINOLOGY..........................................4
4. CASSETTE PRECAUTIONS AND CARE ..................5
5. DCP (Detachable Control Panel)..............................5
6. REMOTE CONTROL...................................................6
7. OPERATION................................................................8
8. TROUBLESHOOTING ..............................................13
9. SPECIFICATIONS.....................................................14
AX410
AM/FM CASSETTE
2-1/4"
58 mm)
WITH CD CHANGER CONTROL
•
■Table des matières
Français
RADIO AM/FM-LECTEUR CASSETTE
AVEC PILOTAGE DE CHANGEUR CD
•
RADIOCASSETTE AM/FM
CON CONTROL DE CAMBIADOR DE CD
1. CARACTÉRISTIQUES..............................................15
2. COMMANDES.............................................................3
3. NOMENCLATURE DES TOUCHES .........................16
4. PRÉCAUTIONS ET ENTRETIEN DES CASSETTES.......17
5. CLAVIER DE COMMANDE AMOVIBLE (DCP) .......17
6. TÉLÉCOMMANDE....................................................18
7. FONCTIONNEMENT.................................................20
8. DÉPISTAGE DES PANNES......................................26
9. SPÉCIFICATIONS.....................................................27
mas EIA.
especifi-
sujetos a
■Índice
Español
1. CARACTERÍSTICAS ................................................29
2. CONTROLES..............................................................3
3. NOMENCLATURA DE LOS BOTONES...................30
4. PRECAUCIONES Y CUIDADOS DE LOS CASETES......31
5. PANEL DE CONTROL DESMONTABLE (DCP) ......31
6. CONTROLADOR REMOTO......................................32
7. OPERACIÓN.............................................................34
8. SOLUCIÓN DE PROBLEMAS..................................41
9. ESPECIFICACIONES ...............................................42
Be sure to unfold and read the next page.
Veuillez déployer et vous référer à la page suivante.
Cerciórese de desplegar y de leer la página siguiente.
E-1712B
7581-00
AX410
2
Download from Www.Somanuals.com. All Manuals Search And Download.
S
3. BUTTON TERMINOLOGY
8. SOLUCIÓN DE PROBLEMAS
Note:
Problema
Causa
Solución
Be sure to read this chapter referring to the front diagrams of chapter 2. CONTROLS on page 3 (unfold).
•
El fusible se ha quemado.
Reemplace el fusible antiguo por uno
de igual amperaje.
La unidad no se
enciende.
1 DCP Release Button
2 Rotary Knob
(o no hay emisión de
sonido.)
Conexiones incorrectas.
Lea la “Guía de instalación/conexión
de cables” adjunta, y realice las
conexiones correctas.
3 A-M (Audio Mode) Button
LD (Loudness) Button
Use una cinta de limpieza, etc., para
limpiar el cabezal.
La calidad del sonido es
mala.
El cabezal de
reproducción está sucio.
4 POWER Button
La unidad no emite
sonido.
Los conductores de la
antena motorizada están
cortocircuitados a masa.
Desconecte en primer lugar la alimentación
de la unidad.
FNC (Function) Button
Desconecte todos los conductores de
conexión de la antena motorizada, conecte
la alimentación de la unidad, y después
conecte, uno tras otro, los conductores de
la antena motorizada. Si el sonido vuelve a
silenciarse, compruebe en último lugar la
unidad con un conductor conectado.
5 Eject ( ) Button
6 ISR (Instant Station Recall) Button
7 DISP (Display) Button
8 RDM (Random) Button
Para protección del sistema, esta unidad incorpora una serie de funciones de autodiagnóstico.
Cuando se produzca un problema, el usuario será alertado de tal condición mediante la indi-
cación de error correspondiente. Para resolver el problema, siga los procedimientos que se
describen a continuación.
9 RPT (Repeat) Button
BLS (Blank Skip) Button
0 SCN (Scan) Button
Indicación de error
Causa
Solución
PS/AS (Preset Scan/Auto Store) Button
TAPE ER1 La cinta no puede reproducirse debido a
Extraiga el casete y cámbielo por otro
nuevo.
que esté defectuosa, por ejemplo, corta-
da.
! Preset Buttons (1 to 6)
Direct Buttons (1 to 6)
TAPE ER2 La cinta se ha enredado y no puede
Extraiga el casete atascado o la cinta
enredada.
@ Z-EHCR (Z-enhancer) Button
reproducirse.
TAPE ER4 No puede detectarse el modo de cinta.
Éste es un problema del mecanismo del
reproductor de casetes. Póngase en con-
tacto con el comercio en el que adquirió la
unidad.
# BND (Band) Button
PROG (Program) Button
MAG (Magazine) Button
TAPE ER8 La cinta se ha enredado y el casete no
Elimine la razón del enredo de la cinta.
$ SRCH (Search) Left and Right (
and
) Buttons
puede extraerse.
CDCH ER2 No hay discos cargados en el interior del Éste es un problema del cambiador de dis-
% Play/Pause (
) Button
cambiador de discos compactos.
cos compactos. Póngase en contacto con
el comercio en el que adquirió la unidad.
MUTE Button
CDCH ER3 El disco compacto del cambiador de dis-
cos compactos no puede reproducirse
debido a ralladuras, etc.
Reemplace el disco compacto por otro que
no esté rayado ni alabeado.
CDCH ER6 El disco compacto del cambiador de dis-
cos compactos no puede reproducirse
Extraiga el disco y cárguelo adecuada-
mente.
debido a que está cargado al revés.
Si la unidad exhibe una indicación distinta de las descritas arriba, presione el botón de reposición. Si el problema per-
siste, desconecte la alimentación y consulte en la tienda donde adquirió el equipo.
4
AX410
AX410
41
Download from Www.Somanuals.com. All Manuals Search And Download.
4. CASSETTE PRECAUTIONS AND CARE
1. Tape slack can lead to operating difficulties.
Remove tape slack before inserting a cas-
sette, particularly when using C-90 or prere-
corded cassettes.
5. Always remove the cassette from the mecha-
nism when not in use. Exposure to direct sun-
light, extreme temperatures or high humidity
may damage cassettes.
2. Use C-30 to C-90 cassettes. Avoid use of
C-120 or longer cassettes (The very thin tape
may stretch or break).
6. The cassette tape will automatically eject
from the mechanism if it is damaged. Always
ensure that cassette tapes are in good condi-
tion prior to use.
3. Clean the head periodically with a good com-
mercial head cleaner. Avoid touching the
head with magnetic or hard objects.
4. Do not oil the cassette mechanism.
5. DCP (Detachable Control Panel)
The control panel can be detached to prevent
theft. When detaching the control panel, store it
Storing the DCP in the DCP Case
Hold the DCP, in the orientation as shown in the
in the included DCP case to prevent scratches.
figure below, and put it into the supplied DCP
We recommend taking the control panel with you
case. (Ensure the DCP is in the correct orienta-
when leaving the car.
tion.)
Removing the DCP
DCP
1. Turn off the power.
2. Press the DCP Release button 1.
DCP Release button 1
DCP case
CAUTION
• The DCP can easily be damaged by shocks. After
removing it, place it in its case and be careful not
to drop it or subject it to strong shocks.
DCP
The DCP is unlocked.
When the release button is pressed and the DCP
is unlocked, the car’s vibrations may cause it to
fall. To prevent damage to the DCP, always store it
in its case after detaching it.
*
•
•
3. Remove the DCP.
Attaching the DCP
Insert the DCP into the right side of the source
unit and press the left side to lock it.
The connector connecting the source unit and the
DCP is an extremely important part. Be careful
not to damage it by pressing on it with fingernails,
pens, screwdrivers, etc.
CAUTION
Do not insert the DCP from the left side. Doing so
may damage it.
DCP Rear Panel
Source Unit Front
2.
DCP
connector
Source unit
connector
DCP
1.
Note:
If the DCP is dirty, wipe off with a soft, dry cloth.
•
Download from Www.Somanuals.com. All Manuals Search And Download.
AX410
5
6. REMOTE CONTROL
Receiver for remote control unit
Operating range: 30° in all directions
Signal transmitter
Remote control unit
¥
*
)
(
&
™
¡
£
§
¢
∞
Inserting the Batteries
1. Turn the remote control unit over, then slide
the rear cover in the direction of the arrow.
AA (UM-3/1.5 V)
Batteries
2. Insert the AA (UM-3/1.5 V) batteries that
came with the remote control unit facing in
the directions shown in the figure, then close
the rear cover.
Notes:
Using batteries improperly can cause them to explode.
Take note of the following points:
Rear cover
• When replacing batteries, replace both batteries with
new ones.
Rear side
• Do not short-circuit, disassemble or heat batteries.
• Do not dispose of batteries into fire or flames.
• Dispose of spent batteries properly.
Download from Www.Somanuals.com. All Manuals Search And Download.
6
AX410
Functions of Remote Control Unit Buttons
Mode
Radio
Tape
CD changer
Button
¥ FUNC
Turns power on and off. When pressed and held for 1 second: Turns power off.
Switches between radio, Tape and CD changer.
& BAND
Switches reception band.
Switches the side of the
tape.
Moves the next disc in
increasing order.
DISC UP
PROG
TOP
* VOLUME
( SEARCH
Increases and decreases volume (in all modes).
Moves preset channels up Fast-forward and rewinds
Moves tracks up and
down.
When pressed and held for
1 second:
and down.
tape.
APC fast-forward and
rewind.
Fast-forward/
fast-backward.
)
PLAY/PAUSE Turns mute on and off.
Switches between
playback and pause.
Switches between
playback and pause.
¡ MUTE
™ ISR
Turns mute on and off.
Switches between
playback and pause.
Switches between
playback and pause.
Recalls ISR radio station in memory.
Press and hold for more than 2 seconds: Stores current station into ISR memory
(radio mode only).
£ DISP
Switches among main display, sub display and clock display.
¢ SCAN
Preset scan.
When pressed and held for
2 seconds: Auto store.
Fast-forward scan.
Scan play.
When pressed and held for
1 second: Disc scan play.
PS/AS
∞ RPT
No function.
No function.
Repeat play.
Repeat play.
BLS
When pressed and held for When pressed and held for
1 second:
Blank tape skip function
turns on and off.
1 second: Disc repeat play.
§ RDM
No function.
Random play.
MONI
When pressed and held for
1 second: Disc random
play.
* Some of the corresponding buttons on the source unit and remote control unit have different functions.
Download from Www.Somanuals.com. All Manuals Search And Download.
AX410
7
7. OPERATION
Note:
Be sure to read this chapter referring to the front diagrams of chapter 2. CONTROLS on page 3 (unfold).
•
Adjusting the Treble
Basic Operation
1) Press A-M button 3 and select “TREB”.
CAUTION
2) Turning the Rotary knob 2 clockwise empha-
sizes the treble; turning it counterclockwise
attenuates the treble.
When this unit is turned on, starting and stop-
ping the engine of a car with its volume raised
to the maximum level may harm your hearing.
Be careful about adjusting the volume.
The factory default setting is “0”. (Adjustment
range: –6 to +6)
*
3) When the adjustment is complete, press A-M
button 3 several times until the function
mode is reached.
1) Press the POWER button 4.
To turn the power off, press the POWER button for
*
at least 1 second.
2) Press the FNC button 4 to select the opera-
tion mode. The mode switches as follows
each time the FUNC button is pressed:
Radio ➜ Tape ➜ CD changer ➜ Radio
Adjusting the Balance
1) Press A-M button 3 and select “BAL”.
2) Turning the Rotary knob 2 clockwise empha-
sizes the sound from the right speaker; turn-
ing it counterclockwise emphasizes the sound
from the left speaker.
If a component is not connected, that operation
mode cannot be selected.
*
“NO CASS” appears when no tape is loaded in
the source unit, and “NO DISC” appears when no
*
The factory default setting is “0”. (Adjustment
range: L9 to R9)
disc is loaded in the CD changer.
*
3) Turning the Rotary knob
2
clockwise
3) When the adjustment is complete, press A-M
button 3 several times until the function
mode is reached.
increases the volume; turning it counterclock-
wise decreases the volume.
The volume level is from 0 (minimum) to 33 (max-
imum).
*
Adjusting the Fader
1) Press A-M button 3 and select “FAD”.
Audio Mode Adjustments
2) Turning the Rotary knob 2 clockwise empha-
sizes the sound from the front speakers; turn-
ing it counterclockwise emphasizes the sound
from the rear speakers.
Press the A-M button 3 to select the adjustment
mode. The mode switches as follows each time
the A-M button is pressed:
BASS ➜ TREB ➜ BAL ➜ FAD ➜ Previous
mode
The factory default setting is “0”. (Adjustment
range: F9 to R9)
*
3) When the adjustment is complete, press A-M
button 3 several times until the function
mode is reached.
Adjusting the Bass
1) Press A-M button 3 and select “BASS”.
2) Turning the Rotary knob 2 clockwise empha-
sizes the bass; turning it counterclockwise
attenuates the bass.
Setting the Z-enhancer
This unit comes with three types of sound tone
effects stored in memory. Select the one you prefer.
The factory default setting is “0”. (Adjustment
*
The factory default setting is “Z-EHCR OFF”.
range: –6 to +6)
*
Each time you press Z-EHCR button @, the
tone effect changes in the following order.
“Z-ENHANCER 1” ➜ “Z-ENHANCER 2” ➜
“Z-ENHANCER 3” ➜ “Z-EHCR OFF” ➜
“Z-ENHANCER 1”...
3) When the adjustment is complete, press A-M
button 3 several times until the function
mode is reached.
Download from Www.Somanuals.com. All Manuals Search And Download.
8
AX410
• Z-ENHANCER 1: bass emphasized
• Z-ENHANCER 2: treble emphasized
• Z-ENHANCER 3: bass and treble emphasized
• Z-EHCR OFF: no sound effect
Tape Operation
Loading Tapes
Insert the cassette tape into the Cassette inser-
tion slot with the side on which the tape is
exposed facing the right. Playback starts auto-
matically.
Loudness Function
Press the LD button 3 for at least 1 second to
turn the loudness function on and off.
The metal tape setting is set automatically when a
metal or chrome tape is loaded.
*
When the end of the cassette tape is reached, the
auto reverse mechanism is activated and the other
side of the tape begins playing automatically.
*
Switching the Display
Press the DISP button 7 to enter the clock dis-
play mode.
Operation mode display ➜ Clock display ➜
Operation mode display
Listening to a tape which is already loaded
Press the FNC button 4 to select the tape
mode. Playback begins automatically.
Stopping Playback Temporarily
Press the Play/Pause button %. Press the but-
ton again to resume playback.
Setting the Clock
1) Press the DISP button 7 to enter the clock
display mode.
2) Press the DISP button 7 for 1 second or
Ejecting Cassette Tapes
Press the Eject button 5. The cassette tape is
more. This enables clock editing.
The editable fields will be indicated by flash.
*
3) To move between the hour and minute fields,
use the SRCH Left (hour) and Right (minute)
buttons $.
ejected.
Fast-Forwarding and Rewinding
4) To confirm the clock setting, press the DISP
button 7.
Use the SRCH Left and Right buttons $.
: Press this to fast-forward the tape.
: Press this to rewind the tape.
Notes:
If you select another operation mode before complet-
ing the above procedure, the clock setting operation
will be canceled.
•
APC (Auto Program Control)
Removing the battery for a check or repair causes the
clock to be reset. Set the clock again in such a case.
•
Press the SRCH Left or Right button $ twice.
: Press this twice to move ahead to the
beginning of the next selection.
: Press this twice to move back to the
beginning of the current selection.
Download from Www.Somanuals.com. All Manuals Search And Download.
AX410
9
Switching to the Other Side of the
Tape
Radio Operation
Press the PROG button #. Playback is switched
to the other side of the cassette tape.
FM Reception
For enhanced FM performance the
®
tuner includes signal actuated stereo control and
Multipath noise reduction circuits.
FF Scan Function (Intro Music Scan)
When the SCN button 0 is pressed, “SCN”
appears on the display, and the first 10 seconds
of all the tracks on the cassette tape are played.
Press the SCN button again to stop scanning.
Listening to the Radio
1) Press the FNC button 4 and select the radio
mode. The radio turns on.
2) To tune in a preset station, first press the
BND button # and select FM1, FM2, FM3 or
AM.
Repeat Function (Repeat Play)
When the RPT button 9 is pressed, “RPT”
appears on the display and the current track is
played repeatedly. Press the RPT button again
to cancel the repeat mode.
The band changes as follows each time the
BND button is pressed:
FM1 ➜ FM2 ➜ FM3 ➜ AM ➜ FM1
3) Use the Preset buttons ! to select the
desired station.
Blank Skip Function
Use this function to automatically skip to the
beginning of the next recorded section when
there is a blank section of 12 seconds or more
on the tape.
When the BLS button 9 is pressed for 1 second
or longer, the blank skip mode is set and “BLS”
appears on the display. Press the BLS button 9
again for 1 second or longer to cancel the blank
skip mode.
Mute
Use this function to turn off the sound immedi-
ately.
Press the MUTE button %. The sound turns off
and “MUTE” appears on the display. Press the
MUTE button again to cancel the mute mode.
Seek Tuning
Notes:
1) Press the BND button # and select the
The APC, scan, repeat and blank skip functions will not
work with the following types of tapes:
desired band.
2) Press the SRCH Left or Right button $. Seek
tuning automatically stops when a station is
found.
Tapes on which the recording level is low
•
•
Tapes on which there is less than 4 seconds of blank
space between selections
Tapes on which there are long pauses in the middle
of selections
•
Manual Tuning
Tapes on which there is much noise between selec-
tions
•
1) Press the BND button # and select the
desired band.
2) Press the BND button again for more than 1
second. “MANU” lights in the display and the
manual tuning mode is set.
3) Use the SRCH Left and Right buttons $ to
tune in the desired frequency.
Download from Www.Somanuals.com. All Manuals Search And Download.
10
AX410
Recalling the ISR station
Presetting Stations
Press the ISR button 6 from any mode. “ISR”
appears on the display and the set station is
tuned in. To cancel, press the ISR button again.
A total of 24 stations can be preset, 6 each for
the FM1, FM2, FM3 and AM bands.
Note:
When a station is preset, the station previously stored
in the memory at that position is cleared.
•
Area Change Function
Use this to listen to the radio outside of the
United States.
Presetting stations manually
1) Press the BND button # to select the band
at which to store the station.
Switchable frequency spacing
This car stereo is initially set to tune in frequen-
cy intervals of 10 kHz for AM and 200 kHz for
FM, the standard calibrations in the U.S. When
using the unit outside the U.S., use the following
procedure to switch the frequency steps and fre-
quency range:
2) Use the SRCH Left and Right buttons $ to
tune in the station to be preset.
3) Press the Preset button ! at which you want
to store that station for at least 2 seconds.
Auto store function (Automatic Station Store)
1) Press the BND button # to select the band
1) Turn the power on and set the tuner mode.
at which to store the stations.
2) Keep the BND button # pressed and while
pressing the button, press the SRCH Left but-
ton $.
2) Press the AS button 0 for at least 2 seconds.
Stations with good reception are automatical-
ly stored at Preset buttons ! 1 to 6.
3) Release the buttons.
If there are fewer than 6 stations with good recep-
tion, the stations previously stored at the remain-
ing buttons are not cleared.
*
This procedure changes the factory setting to
9 kHz steps for AM and 50 kHz steps for FM,
the standard calibrations for countries other
than the U.S.
To change the AM/FM setting back to the U.S.
standard frequencies:
Preset Scanning (Preset Station Scan)
When the PS button 0 is pressed, the preset
memory numbers flash and the stations are
tuned in for 7 seconds each in the order in which
they were stored. Press the PS button again to
cancel the preset scanning mode.
1) Set the tuner mode.
2) While pressing the BND button #, press the
SRCH Right button $.
3) Release the buttons.
Your car stereo will once again be calibrated
to receive standard U.S. transmissions.
Instant Station Recall (ISR) Function
The chart below lists the frequency specifica-
tions for the U.S. and other countries.
This function allows you to recall a specific radio
station from any mode. Use it to find stations
quickly when you want to hear specific informa-
tion (such as traffic announcements) while dri-
ving. The ISR station is set to 87.9 MHz upon
shipment from the factory.
Inital Setting New Setting
(U.S. standard) (outside U.S.)
Frequency
spacing
10 kHz
9 kHz
AM
FM
Setting the ISR station
Frequency
range
530 to
1710 kHz
531 to
1629 kHz
1) Press the FNC button 4 to select the radio
mode.
2) Tune in the station to be set as the ISR sta-
tion.
Frequency
spacing
200 kHz
87.9 to
50 kHz
87.5 to
3) Press the ISR button 6 for more than 2 sec-
Frequency
range
onds to store that station in the memory as
the ISR station.
107.9 MHz 108 MHz
Download from Www.Somanuals.com. All Manuals Search And Download.
AX410
11
Disc scan play
Press and hold the SCN button 0 for 1 second
CD Changer Operation
or longer, then the display will show “
” and
When a separately sold CD changer is connect-
ed, it can be controlled from the source unit.
“SCN”, and plays the first 10 seconds of the first
tracks of all the CDs in the CD changer.
Press the SCN button 0 again to disengage the
unit from disc play.
Notes:
Some CDs recorded in CD-R mode may not be
usable.
•
A scan play will start from the first tracks of next CDs
following the one currently playing.
*
Even when recorded in CD-R/W mode, some CDs
may not be usable.
•
Repeat Play
Listening to the Disc
Press the RPT button 9, then the display shows
“RPT”, then the track currently playing will be
played repeatedly. Press the RPT button 9
again to disengage the unit from repeat play.
Press the FNC button 4 and select the CD
changer mode, then the CD starts playing.
Stopping (pausing) Playback
Press the Play/Pause button %.
Press the Play/Pause button % again to resume
playback.
Disc repeat play
Press and hold the RPT button 9 for 1 second
or longer, then the display shows both the
“
” and “RPT”, then the disc currently
being played will be played repeatedly.
Press the RPT button 9 again to disengage the
unit from disc repeat play.
Selection of CDs
Press the Direct button ! to select 1 to 6, then
select the CD you wish to play.
Random Play
Selecting Tracks (songs)
Press the RDM button 8, then the display will
show “RDM”, then the entire tracks on the disc
will be played at random.
Press the RDM button 8 again to disengage the
unit from disc random play.
Press the SRCH Left and Right buttons $.
: Playback will start from the next track.
: Playback will start from the beginning of
the track currently playing. When this
button is pressed again, the CD will play
from the previous track.
Disc random playback
Press and hold the RDM button 8 for 1 second
or longer, then the display will show both the
Fast-Forward and Fast-Backward
Press and hold the SRCH Left and Right buttons
$.
“
” and “RDM”, then the entire tracks of all
the discs in the CD changer will be played at ran-
dom.
Press the RDM button 8 again to disengage the
unit from disc play.
: To fast-forward
: To fast-backward
Pressing the SRCH Left / Right button for 1 second or
*
longer will move forward or backward 5 times faster
than normal play, and pressing it for 3 seconds or
longer will do the operation 30 times faster.
Switching Magazine
This function can be used only when the con-
nected CD changer can store a multiple number
of magazines.
Scan Play (Intro Music Scan)
Every time the MAG button # is pressed, the
next magazine will be selected.
Press the SCN button 0, then the display
shows “SCN”, then the CD will play the first 10
seconds of all the tracks of all CDs. Press the
SCN button 0 again to disengage the unit from
scan play.
A scan play will start from the track following the one
currently playing.
*
Download from Www.Somanuals.com. All Manuals Search And Download.
12
AX410
8. TROUBLESHOOTING
Problem
Cause
Measure
Power does not turn on.
(or no sound is produced.)
Fuse is blown.
Replace with a fuse of the same
amperage as the old fuse.
Connections are improper. Read the attached “Installation/Wire
Connection Guide” once again and
wire properly.
Sound quality is poor.
Playback head is dirty.
Use a cleaning tape, etc. to clean the
head.
No sound while unit can
be operated.
Power ANT lead is shorted
to the ground.
Turn the unit off, first.
Remove all connecting wires from the
power ANT lead, and turn the unit on,
then re-connect a wire one by one to
the power ANT lead.
When sound is muted again, check
the unit with a wire connected last.
This unit is equipped with a number of self-diagnosis functions to protect the system. If a prob-
lem should occur, the user is warned through various error displays. Eliminate the problem
using the procedures shown below.
Error Display
Cause
Measure
TAPE ER1 Tape cannot be played due to defective
Eject the tape then replace it with a new
one.
tape such as cut tape.
TAPE ER2 Tape is caught and cannot be played.
TAPE ER4 Tape mode cannot be detected.
Remove the caught or wound tape.
This is a failure of tape mechanism and
consult your store of purchase.
TAPE ER8 Tape is caught and cannot be ejected.
Eliminate the reason for which the tape is
caught.
CDCH ER2 A CD inside the CD changer is not
This is a failure of CD changer’s mecha-
nism and consult your store of purchase.
loaded.
CDCH ER3 A CD inside the CD changer cannot be
Replace with a non-scratched, non-warped
disc.
played due to scratches, etc.
CDCH ER6 A CD inside the CD changer cannot be
Eject the disc then reload it properly.
played because it is loaded upside-down.
If a display other than one of the displays above appears, press the reset button. If the problem persists, turn the
power off and contact your store of purchase.
Download from Www.Somanuals.com. All Manuals Search And Download.
AX410
13
9. SPECIFICATIONS
FM Tuner
General
Frequency Range……87.9 MHz to 107.9 MHz
Usable Sensitivity……11 dBf
Power Supply Voltage
……14.4 V DC (10.8 V to 15.6 V allowable)
Current Consumption…… Less than 15 A
Speaker Impedance
……4 Ω (4 Ω to 8 Ω allowable)
Weight……3.52 lb. (1.6 kg)
Dimensions
50 dB Quieting Sensitivity……17 dBf
Alternate Channel Selectivity……75 dB
Stereo Separation (1 kHz)……35 dB
Frequency Response (±3 dB)
……30 Hz to 15 kHz
……7" (178 mm) Width × 2" (50 mm) Height
× 6-3/32" (155 mm) Depth
AM Tuner
7"
2"
(178 mm)
(50 mm)
Frequency Range……530 kHz to 1,710 kHz
Usable Sensitivity……25 µV
"
Tape
Wow & Flutter (WRMS)……0.08%
Channel Separation (1 kHz)……45 dB
Signal to Noise Ratio
"
7-3/8"
(188 mm)
2-1/4"
(58 mm)
……70 µs (CrO2, FeCr, Metal):
58 dB
Frequency Response (±3 dB)
120 µs (normal)……30 Hz to 18 kHz
70 µs (CrO2, FeCr, Metal)……30 Hz to 20 kHz
Notes:
Specifications comply with EIA Standards.
•
•
Specifications and design are subject to change with-
out notice for further improvement.
Power Amplifier
Maximum Power Output……180 W (45 W × 4ch)
Continuous Average Power Output
……17 W × 4, into 4 Ω, 20 Hz to 20 kHz,
1% THD
Pre-Amplifier
Bass Control Action (30 Hz)……±13 dB
Treble Control Action (10 kHz)……±10 dB
Line Output (with A/C 1 kHz, 10 kΩ)……1.8 V
Download from Www.Somanuals.com. All Manuals Search And Download.
14
AX410
|