Owner’s manual & Installation manual
Mode d’emploi et manuel d’installation
Manual de instrucciones y de instalación
RADIO/DVD MULTIMEDIA CENTER WITH
CeNET CONTROL
CENTRE MULTIMÉDIA DVD/RADIO AVEC
COMMANDE CeNET
CENTRO DE MULTIMEDIA DE DVD/RADIO
CON CONTROL CeNET
Download from Www.Somanuals.com. All Manuals Search And Download.
Thank you for purchasing the Clarion VRX765VD.
* This owner’s manual is for the VRX765VD.
* Please read this manual thoroughly before operating this equipment.
* After reading this manual, be sure to keep it in a handy place (e.g., glove compartment).
* Check the contents of the enclosed warranty card and keep it carefully with this manual.
* This manual includes the operating procedures of the 2-ZONE control, iPod control, CD changer, DVD
changer, TV tuner, Satellite Radio, 5.1ch surround decoder. The CD changer, DVD Changer, TV tuner and
5.1ch surround decoder have their own manuals, but no explanations for operating them are described.
Contents
1. FEATURES.................................................................................................................... 3
EXPANDING SYSTEMS................................................................................................ 3
2. PRECAUTIONS ............................................................................................................. 4
3. CONTROLS/COMMANDES/CONTROLES................................................................... 5
4. NOMENCLATURE......................................................................................................... 6
Names of Buttons........................................................................................................... 6
5. OUTLINE OF BUTTON AND TOUCHKEY OPERATION ............................................. 7
6. REMOTE CONTROL ................................................................................................... 13
Functions of Remote Control Unit Buttons................................................................... 14
7. DCP.............................................................................................................................. 17
8. CAUTIONS ON HANDLING ........................................................................................ 18
Liquid crystal panel/Generalities................................................................................... 18
Cleaning ....................................................................................................................... 18
Handling Discs ............................................................................................................. 19
9. DVD VIDEO SYSTEM.................................................................................................. 20
DVD Video Features .................................................................................................... 20
Discs............................................................................................................................. 21
About the registered marks etc. ................................................................................... 21
10. OPERATIONS.............................................................................................................. 22
Basic Operations.......................................................................................................... 22
Radio Operations ......................................................................................................... 31
DVD Video Player Operations...................................................................................... 33
Other Functions............................................................................................................ 46
11. OPERATIONS OF ACCESSORIES............................................................................. 48
iPod Operations............................................................................................................ 48
VISUAL Operations...................................................................................................... 51
CD Changer Operations............................................................................................... 51
DVD Changer Operations ............................................................................................ 53
TV Operations .............................................................................................................. 53
Satellite Radio Operations............................................................................................ 56
5.1 ch Surround Decoder Operations........................................................................... 59
12. IN CASE OF DIFFICULTY........................................................................................... 63
13. ERROR DISPLAYS...................................................................................................... 65
14. SPECIFICATIONS ....................................................................................................... 66
INSTALLATION AND WIRE CONNECTION MANUAL.................................................... 67
1. BEFORE STARTING................................................................................................ 67
2. PACKAGE CONTENTS ........................................................................................... 67
3. GENERAL CAUTIONS............................................................................................. 67
4. CAUTIONS ON INSTALLATION.............................................................................. 68
5. INSTALLING THE MAIN UNIT................................................................................. 69
6. REMOVING THE MAIN UNIT .................................................................................. 71
7. CAUTIONS ON WIRING .......................................................................................... 71
8. WIRE CONNECTION............................................................................................... 72
9. SAMPLE SYSTEM................................................................................................... 75
2
VRX765VDDownload from Www.Somanuals.com. All Manuals Search And Download.
1. FEATURES
2. PRECAUTIONS
■Fully-Motorized 7" Widescreen LCD
■Touch Panel Control
■DVD Video/CD-DA/MP3/WMA/Video CD
Play Capability
■RCA 6(+2)-Channel (2-zone) Output
■Built-in 50 W × 4 Amplifier
■CD-R/CD-RW/DVD-R/DVD-RW Compatible
■5.1 Channel Decoder for DTS and Dolby
Digital Ready
■Optical Digital Output
■2-ZONE Control
■iPod® Control
WARNING
For your safety, the driver should not watch the DVD video/TV/VTR or operate the controls
while driving. Please note that watching and operating the DVD video/TV/VTR while driving are
prohibited by law in some countries. Also, while driving, keep the volume to a level at which
external sounds can be heard.
■CeNET with Balanced Audio Line
Transmission and Dynamic Noise
Canceling
“iPod” is a trademark of Apple Computer,
1. When the inside of the car is very cold and the
player is used soon after switching on the
heater, moisture may form on the disc (DVD/
CD) or the optical parts of the player and
proper playback may not be possible. If
moisture forms on the disc (DVD/CD), wipe it
off with a soft cloth. If moisture forms on the
optical parts of the player, do not use the
player for about one hour. The condensation
will disappear naturally allowing normal
operation.
guarantee that interference will not occur in a
particular installation. If this equipment does
cause harmful interference to radio or
television reception, which can be determined
by turning the equipment off and on, the user
is encouraged to consult the dealer or an
experienced radio/TV technician for help.
Inc.,registered in the U.S. and other countries.
INFORMATION FOR USERS:.
EXPANDING SYSTEMS
CHANGES OR MODIFICATIONS TO THIS
PRODUCT NOT APPROVED BY THE
MANUFACTURER WILL VOID THE
WARRANTY AND WILL VIOLATE FCC
APPROVAL.
Expanding audio features
Satellite Radio
Expanding visual features
2. Driving on extremely bumpy roads which
cause severe vibration may cause the sound
to skip.
CCD Camera
TV Tuner
3. This unit uses a precision mechanism. Even
in the event that trouble arises, never open
the case, disassemble the unit, or lubricate
the rotating parts.
CeNET DVD Changer
CeNET CD Changer
iPod
4. TV broadcast reception (when the optional TV
tuner is connected)
VTR etc.
When receiving the TV broadcast, the
strength of the signals changes since the car
is moving, so in some cases it may not be
possible to receive clear pictures.
• TV signals are strongly linear, so reception
is affected by buildings, mountains and
other obstacles.
• Such external factors such as electric train
lines, a high voltage lines, and signal
devices may disturb the picture or cause
noise.
Note:
The items listed outside of the
frames are the commercial
products generally sold.
* If the reception is poor, switch to a station with
good reception.
Rear monitor
5. This equipment has been tested and found to
comply with the limits for a Class B digital
device, pursuant to Part 15 of the FCC Rules.
These limits are designed to provide
4-Channel Amplifier
reasonable protection against harmful
Wireless
interference in a residential installation. This
equipment generates, uses, and can radiate
radio frequency energy and, if not installed
and used in accordance with the instructions,
may cause harmful interference to radio
communications. However, there is no
5.1 ch Surround
Decoder
Head phone
Be sure to unfold and read the next page.
Expanding features for the rear seats
Veuillez déplier et vous référer à la page suivante.
Expanding sound features
Cerciórese de desplegar y de leer la página siguiente.
3
4
VRX765VD
Download fromVWRXw76w5.VSDomanuals.com. All Manuals Search And Download.
3. CONTROLS/COMMANDES/
CONTROLES
4. NOMENCLATURE
Names of Buttons
Note:
[iPod] button
[
]
iPod
• Be sure to read this chapter while referring to the
front diagrams for chapter “3.CONTROLS” on
page 5 (unfold).
• Press this button to switch to the iPod mode.
[
]
CONT.
[CONT.] button
• Press this button to show/hide the key pad on
the menu screen of DVD video/Video CD.
[
]
MENU
[E], [e] buttons
• Use these buttons to increase/decrease the
volume.
[MENU] button
• Press this button to show the menu screen of
DVD video/Video CD. Keep pressing this
button more than 1 second to show the top
menu screen of DVD video.
[p] button
• Press this button to enter the play pause
mode in the DVD PLAYER/iPod/changer
modes. Press the button again to resume
playback.
[ADJ] button
• Press this button to enter/exit the ADJUST
mode to change the settings.
[ ][e]
E
• Keep pressing this button more than 1 second
to mute the sound in the DVD PLAYER/iPod/
changer modes.
• Press this button to mute the sound in the
TUNER/Satellite Radio/TV/VISUAL modes.
•
Keep pressing this button more than 1 second
switches the liquid crystal panel to a composite
screen to lock the monitor (To enable this
function, go to the GENERAL menu (within the
ADJUST menu), and use the [CONNECT] key
to select “NAVI” or “OTHER”).
[
]
P
[
]
SRC
[SRC] button
• Press this button to turn on the power. Keep
pressing this button more than 1 second to
turn off the power.
[
]
]
ISR
Sensor
[MONI] button
• Press this button to enter/exit the Monitor
Adjust mode.
• Keep pressing this button more than 1 second
to turn off the back light of the liquid crystal
panel.
[
MONI
• When the liquid crystal panel closed, press
this button to change to the next mode such
as TUNER mode.
• When the liquid crystal panel open, press this
button to display the Source menu screen to
switch the mode.
[
]
BAND
[
]
ADJ
[ISR] button
• Use this button to enter/exit the ISR (Instant
Station Recall) standby mode.
• Keep pressing this button more than 2
seconds to store the current station into ISR
memory in the radio mode.
[R], [F] buttons
• Use these buttons to change to the previous/
next preset station in the TUNER/Satellite
Radio/TV modes.
• Use these buttons to select a track in the CD,
Video CD, MP3/WMA, iPod and CD changer
modes.
* The [ISR] button is disabled when the SUB
zone is selected in the 2-ZONE mode.
• Use these buttons to select a chapter in the
DVD video and DVD changer modes.
[o] (EJECT) button
• Use this button to eject the disc set in this unit.
[BAND] button
[P] (OPEN) button
• Use this button to open/close the liquid crystal
panel.
• Press this button to switch the receiving
bands for TUNER/Satellite Radio/TV modes.
Keep pressing this button more than 1 second
to switch the Seek/Manual tuning modes.
• Use this button to move to the first track in the
CD, Video CD and iPod modes, or the first
chapter in the DVD video mode.
• Keep pressing this button more than 2
seconds so that the liquid crystal panel is
positioned horizontally when the liquid crystal
panel is open (Air Conditioner Operation
mode).
• When the liquid crystal panel closed, Keep
pressing this button more than 5 seconds to
perform the panel calibration function to
memorize the maximum angle of the liquid
crystal panel.
Note: Be sure to unfold this page and refer to the front diagrams as you read each chapter.
*The control panel can be detached to prevent theft. For details, see the pages entitled “7. DCP”.
Remarque: Veuillez déplier cette page et vous référer aux schémas quand vous lisez chaque chapitre.
* Le panneau de commande peut être détaché de l’unité pour éviter tout vol. Pour plus d’informations,
reportez-vous au chapitre “7. CLAVIER DE COMMANDE AMOVIBLE”.
Nota: Cuando lea los capítulos, despliegue esta página y consulte los diagramas.
* Puede extraer el panel de control para evitar que lo roben. Para obtener más información, consulte las páginas
del apartado “7. Panel de CONTROL DESMONTABLE (DCP)”.
• Use this button to move to the next folder in
the MP3/WMA mode.
• Use this button to switch to the next disc in the
changer modes.
• Keep pressing this button more than 1 second
to play all tracks in the iPod mode.
5
Download from Www.Somanuals.com. All M6anuals Search And Download.
VRX765VD
VRX765VD
5. OUTLINE OF BUTTON AND
TOUCHKEY OPERATION
Turing the power on
∗2
(OPEN)
Engine ON
position
When the liquid crystal panel closed
∗1
When the liquid crystal panel open
System check
The CeNET format utilized on this unit is
provided with a system check function. When
the system check function is performed
under the following conditions, the power is
automatically turned off. Press the [SRC]
button again.
•When power is first turned on after initial
installation.
•When an external device is connected or
disconnected.
or
•When Reset button is pressed.
∗In addition to the above conditions, the
system check function can be performed
from the GENERAL menu in the ADJUST
mode.
∗You can change the media
sources.
7
VRX765VD
Download from Www.Somanuals.com. All Manuals Search And Download.
TUNER mode operation
(Source menu)
∗3
(Key Pad screen)
∗4
(Preset List screen)
∗Enters desired
frequency.
1
0
7
9
ENT ∗5
∗Selects desired
station.
(Title input screen)
Note:
∗1:The operation button is [ P ](OPEN) button
in the description of operation per mode.
∗2:External equipment not connected with
CeNET is not displayed.
∗3:When the TUNER mode is currently selected,
touch [Back] key.
∗4:The operation key is [Search] key in the
description of operation per mode.
∗5:This shows an example entering 107.9 MHz.
8
VRX765VDDownload from Www.Somanuals.com. All Manuals Search And Download.
DVD Video mode operation
∗6
(DVD PLAYER mode screen)
(Source menu)
∗Screen during DVD mode
when automobile moving.
(Option menu)
(DVD SETUP menu)
Note:
∗6:When displaying movies in DVD video mode, touching the screen surface will cause
the DVD PLAYER mode screen to be displayed.
9
Download from Www.Somanuals.com. All Manuals Search And Download.VRX765VD
Adjusting audio feature settings
(From any screen)
When a 5.1 ch Surround
Decoder is connected
(ADJUST mode menu)
(AUDIO menu)
(AUDIO EXT. menu)
(BAL/FAD)
(BAL/FAD screen)
10
VRX765VDDownload from Www.Somanuals.com. All Manuals Search And Download.
(AUDIO menu)
(AUDIO EXT. menu)
(STATUS)
(SPEAKER SEL)
(STATUS screen)
(SPEAKER SEL menu)
11
Download from Www.Somanuals.com. All Manuals Search And Download.VRX765VD
Adjusting the other system settings
(From any screen)
(ADJUST mode menu)
(GENERAL menu)
(MONITOR menu)
(CLOCK)
(CLOCK screen)
(MONI ADJ)
(Monitor Adjust screen)
(Hour, Minute, am./pm.)
Bright
Color
Hue
Dimmer
∗Switched by touching this key repeatedly.
12
VRX765VDDownload from Www.Somanuals.com. All Manuals Search And Download.
6. REMOTE CONTROL
Remote control unit
Signal transmitter
Operating range: 30˚ in all directions
[
]
]
BAND
[
[
]
MUTE
[
]
SRC
VOLUME
[
]
[
]
P.TIME
0-9
[
]
]
]
DISC SEL
[
],[
[
[
]
]
SEARCH MODE
[
MENU
RTN
[
]
TOP MENU
[
]
]
SET UP
[
],[
]
[
ENT
[
[
]
ISR
[
[
]
2-ZONE
]
[
]
PBC
SCN
]
[
]
RDM
RPT
[
]
]
[
[
]
AUDIO
SLOW
]
[
ANGLE
SUB TITLE
Inserting the Batteries
1. Slide the rear cover in the direction of the
arrow, and remove it.
2. Insert the AA (SUM-3, IECR-6/1.5V) batteries
bundled with the remote control unit in the
directions shown in the figure, then close the
rear cover.
AA (SUM-3, IECR-6/1.5V)
Batteries
Note:
Using batteries improperly can cause them to
explode. Take note of the following points:
• When replacing batteries, replace both batteries
with new ones.
Rear cover
• Do not short-circuit, disassemble or heat batteries.
• Do not dispose of batteries into fire or flames.
• Dispose of spent batteries properly.
Rear side
13
Download from Www.Somanuals.com. All Manuals Search And Download.VRX765VD
Functions of Remote Control Unit Buttons
You can use the remote control unit to control the VRX765VD. When the 2-ZONE function is ON, the
controls work upon the selected zone.
[SCN] button
Shared modes
• Press to perform preset scans in the TUNER
and TV/Satellite Radio modes. For the Satellite
Radio mode, keep pressing more than 1
second.
• Press to perform category scans in the Satellite
Radio mode.
• Keep pressing more than 1 second to perform
the auto store operation in the TUNER and TV/
Satellite Radio modes.
[SRC] button
• Press this button to turn on the power. Keep
pressing this button more than 1 second to turn
off the power.
• Press this button to switch the modes such as
TUNER mode, DVD PLAYER mode.
[VOLUME] buttons
• Increase and decrease volume.
[ISR] button
[MUTE] button
• Recall ISR radio station in memory.
• Keep pressing more than 2 seconds to store
current station into ISR memory (radio mode
only).
• Turns mute on and off.
[RTN] button
• Returns to the previous screen from the list or
menu screens.
• Displays the menu screen when playing a
Video CD.
[RDM] button
• Press to switch between TV mode and VTR
mode.
[2-ZONE] button
• Keep pressing more than 1 second to turn on
the 2-ZONE, and keep pressing again to turn
off 2-ZONE.
DVD PLAYER mode
[BAND] button
• Press to return to the first chapter in DVD video
mode.
• Press to switch between the MAIN zone and
SUB zone when the 2-ZONE is turned on.
• Press to return to the first track in CD and Video
CD modes when playing back.
• Press to move to the next folder when more
than 1 folder are played back in MP3/WMA
mode.
TUNER/TV/Satellite mode
[BAND] button
• Switches reception band.
• Keep pressing more than 1 second to switch
the Seek/Manual tuning modes.
[P.TIME] button
• Press to turn on and off the playtime display in
the DVD video/Video CD modes.
[0 - 9] button
• Use in the Key Pad screen to set the radio
frequency or TV/Satellite Radio channels.
• Use to select the preset number in the Preset
List screen.
[6] button
• Press to play or pause video and audio media.
• Keep pressing more than 1 second to stop
video playback in DVD video.
[DISC SEL] button
[0 - 9] buttons
• Press to show/hide the Preset List screen.
• Press to enter DVD video chapters/titles in the
Key Pad screen.
[SEARCH MODE] button
• Press to show/hide the Key Pad screen.
• Press to set the track/folder number of the CD,
Video CD or MP3/WMA in the Key Pad screen.
[ENT] button
• Press to fix the entered data in the Key Pad
screen.
[DISC SEL] button
• Press to show/hide the Track List screen in the
CD mode.
• Press to show/hide the Folder List screen in the
MP3/WMA mode.
[r], [f] buttons
• Press to select the next higher or lower preset
station in TUNER and TV/Satellite Radio
mode.
14
VRX765VDDownload from Www.Somanuals.com. All Manuals Search And Download.
Functions of Remote Control Unit Buttons
[SEARCH MODE] button
[RDM] button
• Press to display the Key Pad operation screen.
• Keep pressing more than 1 second to switch
the search mode.
• Press to play tracks at random in CD and MP3/
WMA modes.
• Keep pressing more than 1 second to play
folders at random in MP3/WMA mode.
[RTN] button
[PBC] button
• Press to turn on and off the PBC function in the
Video CD mode.
• Press to switch to the menu screen while a
Video CD is being played back. Press to switch
to the previous screen display while the Menu
screen is being displayed. However, it may
occur that this button operation dose not work
on some discs.
[AUDIO] button
• Press to switch the AUDIO function in the DVD
video/Video CD modes.
[MENU] button
• Press to display menu stored on video disc.
[SUB TITLE] button
• Press to display subtitles in the DVD video
mode.
[SET UP] button
• Press to show the DVD SETUP menu screen
during DVD video playback.
[ANGLE] button
• Press to switch the ANGLE function in the DVD
video mode when the Angle mark is displayed.
(This button is available only on multiple angles
DVDs and when the ANGLE function in the
SET UP menu is set to ON.)
[TOP MENU] button
• Press to display the Top Menu screen stored
on DVD video disc. Some discs do not display
the top menu screen.
[E], [e], [T], [t] buttons
• Press to select button items on the menu
screen of a DVD video.
[SLOW] button
• Press to perform slow playback in the DVD
video/Video CD modes.
• Press [E], [e] to scroll the Track/Folder List
screen in the CD and MP3/WMA modes.
iPod mode
[ENT] button
[BAND] button
• Press to fix the entered data in the Key Pad
• Press to return to the first track in the current
play list.
screen.
• Press to fix the selected item in the menu
screens.
• Keep pressing more than 1 second to change
to the All play mode. All tracks in the Song list
will be played back.
[r], [f] buttons
• Press to select the next higher or lower chapter
number in DVD video mode.
• Press to select the next higher or lower track in
CD, Video CD and MP3/WMA modes.
• Keep pressing to perform fast-forward and fast-
backward.
• Keep pressing to perform slow playback while
pausing a DVD video/Video CD play.
[6] button
• Press to play or pause the selected media.
[E], [e] buttons
• Press to scroll the list screens.
[r], [f] buttons
• Press to select the next higher or lower track
numbers.
• Keep pressing to perform fast-forward or fast-
backward.
[SCN] button
• Press to perform chapter scans in the DVD
video mode, and track scans in CD and MP3/
WMA modes.
CD changer mode
• Keep pressing more than 1 second to perform
folder scans in MP3/WMA mode.
[BAND] button
• Press to switch discs.
[RPT] button
[DISC SEL] button
• Press to show/hide the Disc List screen.
• Press to perform chapter repeat in the DVD
video mode, and track repeat in CD and MP3/
WMA modes.
[6] button
• Press to play and pause the selected media.
• Keep pressing more than 1 second to perform
folder repeat in MP3/WMA mode.
15
Download from Www.Somanuals.com. All Manuals Search And Download.VRX765VD
Functions of Remote Control Unit Buttons
[0 - 9] buttons
• Press to enter track numbers in the Key Pad
[RPT] button
• Press to perform track repeat.
screen.
• Keep pressing more than 1 second to perform
disc repeat.
• Other button operations in this mode are the
same as those in DVD PLAYER mode.
• Press to select the disc number in the Disc List
screen.
[E], [e] buttons
• Press to scroll the Disc/Track List screen.
When SUB zone is selected
SUB zone operations are supported, but button
functions are limited as follows:
[r], [f] buttons
• Press to select the next higher or lower track
numbers.
• Keep pressing to perform fast-forward or fast-
backward.
Shared modes
[VOLUME] buttons
[SCN] button
• Controls sound volume for MAIN zone source.
• Press to perform track scan.
• Keep pressing more than 1 second to perform
disc scan.
[MUTE] button
• Controls audio mute function for MAIN zone
source.
[RPT] button
• Press to perform track repeat.
• Keep pressing more than 1 second to perform
disc repeat.
[ISR] button
Not supported.
[RDM] button
CD changer mode
• This mode is disabled when MAIN zone is set
to an external equipment other than the CD
changer.
• Press to play tracks of all discs at random.
• Keep pressing more than 1 second to play
folders of all discs at random.
DVD changer mode
DVD changer mode
• This mode is disabled when MAIN zone is set
to an external equipment other than the DVD
changer.
[BAND] button
• Press to switch discs.
[P.TIME] button
• Keep pressing more than 1 second to switch
between the time progress and remaining time
to be displayed.
[DISC SEL] button
• Press to show/hide the Disc List screen.
[0 - 9] buttons
• Press to enter track numbers in the Key Pad
screen.
• Press to select the disc number in the Disc List
screen.
[E], [e], [T], [t] buttons
• Press to scroll the Disc/Track List screen.
[SCN] button
• Press to perform track scan.
• Keep pressing more than 1 second to perform
disc scan.
16
VRX765VDDownload from Www.Somanuals.com. All Manuals Search And Download.
7. DCP
The control panel can be detached to prevent
theft. When detaching the control panel, store it
in the DCP (Detachable Control Panel) case to
prevent scratches.
Attaching the DCP
1. Hook the right side of the DCP to the right side
of the main unit.
2. Settle the left side of the DCP to the main unit.
We recommend taking the DCP with you when
leaving the car.
Removing the DCP
1. Keep pressing the [SRC] button more than 1
second to turn off the power.
Magnet
CAUTION
CAUTION
• This unit uses a magnet to fix the DCP. For
the items that can be affected by
[
]
SRC button
magnetism, such as magnetic cards, be
sure to keep them away from this unit.
• The DCP can easily be damaged by impact.
After removing it be careful not to drop it
nor subject it to strong impact.
2. Pull the left side of the DCP toward you, and
remove it.
• Remote control unit cannot be used when
the DCP is removed.
Note:
• If the DCP is dirty, wipe it off by using a soft dry
cloth.
CAUTION
CAUTION
When the Auto Panel function (see page 28) is
set to “OFF”, be sure to close the liquid
crystal panel for safe before removing the
DCP.
17
Download from Www.Somanuals.com. All Manuals Search And Download.VRX765VD
8. CAUTIONS ON HANDLING
Liquid crystal panel/Generalities
For a longer service life, be sure to read the following cautions.
• Be sure to house the liquid crystal panel inside
the main unit when parking the car outdoors for
long period of time. The liquid crystal panel will
operate properly in a temperature range of 0 to
60°C.
• Do not allow any liquids on the set from drinks,
umbrellas etc. Doing so may damage the
internal circuitry.
• Do not disassemble or modify the set in any
way. Doing so may result in damage.
• Do not draw the liquid crystal panel out and use
it as a tray. Also, subjecting the liquid crystal
panel to shocks may result in breakage,
deformation or other damage.
• Do not let cigarettes burn the display. Doing so
may damage or deform the cabinet.
• If a problem should occur, have the set
inspected at your store of purchase.
• Do not insert objects or poke in the space
between the liquid crystal panel and the main
unit when the panel is tilted.
• Do not place anything on the display when the
panel is tilted.
• The remote controller may not work if the
remote control sensor is exposed to direct
sunlight.
• In extremely cold weather, the display
movement may slow down and the display may
darken, but this is not a malfunction. The
display will work normally when the
temperature increases.
• Small black and shiny spots inside the liquid
crystal panel are normal for LCD products.
• The liquid crystal panel may stop temporarily
when it opens or closes, when the engine stops
or when it is cold.
• The touchkeys on the display operate when
slightly touched. Do not press the touchkey
screen with much force.
• Do not push the case surrounding the touchkey
panel with much force. This may cause
malfunctioning of the touchkeys.
Cleaning
• Cleaning the cabinet
Use a soft, dry cloth and gently wipe off the dirt.
For tough dirt, apply some neutral detergent
diluted in water to a soft cloth, wipe off the dirt
gently, then wipe again with a dry cloth.
Do not use benzene, thinner, car cleaner, etc.,
as these substances may damage the cabinet
or cause the paint to peel. Also, leaving rubber
or plastic products in contact with the cabinet
for long periods of time may cause stains.
• Cleaning the liquid crystal panel
The liquid crystal panel tends to collect dust, so
wipe it off occasionally with a soft cloth. The
surface is easily scratched, so do not rub it with
hard objects.
18
VRX765VDDownload from Www.Somanuals.com. All Manuals Search And Download.
Handling Discs
Handling
Storage
• New discs may have some roughness around
the edges. If such discs are used, the player
may not work or the sound may skip. Use a
ball-point pen or the like to remove any
roughness from the edge of the disc.
• Do not expose discs to direct sunlight or any
heat source.
• Do not expose discs to excess humidity or
dust.
• Do not expose discs to direct heat from
heaters.
Ball-point pen
Cleaning
Roughness
• To remove fingermarks and dust, use a soft
cloth and wipe in a straight line from the center
of the disc to the circumference.
• Do not use any solvents, such as commercially
available cleaners, anti-static spray, or thinner
to clean discs.
• After using special disc cleaner, let the disc dry
off well before playing it.
• Never stick labels on the surface of the disc or
mark the surface with a pencil or pen.
• Never play a disc with any cellophane tape or
other glue on it or with peeling off marks. If you
try to play such a disc, you may not be able to
get it back out of the DVD player or it may
damage the DVD player.
• Do not use discs that have large scratches, are
misshapen, cracked, etc. Use of such discs
may cause misoperation or damage.
• To remove a disc from its storage case, press
down on the center of the case and lift the disc
out, holding it carefully by the edges.
• Do not use commercially available disc
protection sheets or discs equipped with
stabilizers, etc. These may damage the disc or
cause breakdown of the internal mechanism.
On Discs
• Exercise a good precaution when loading a
disc with the panel open.
• Never turn off the power and remove the unit
from the car with a disc loaded.
CAUTION
CAUTION
With the screen open, a driver may not be
able to see the disc insertion slot. For your
safety, insert a disc with the screen closed.
Even when the screen is closed, however, the
recessed disc slot may be difficult for a driver
to see, care is needed whenever inserting
discs.
No/Non
19
Download from Www.Somanuals.com. All Manuals Search And Download.VRX765VD
9. DVD VIDEO SYSTEM
DVD video is a high-quality digital video source that provides crisp and clear images. One 12 cm disc
contains either one film or four hours of music.
DVD Video Features
This unit provides the following functions in
addition to the high image quality and sound
quality of DVD video.
Note:
• The functions described in the section, “Features”,
for example, the recorded language, subtitles,
angles, etc. differ with the DVD video disc. Refer to
the instructions provided with the DVD video.
• Some disc functions may operate differently from
described in this manual.
Multi-story function
When a DVD video contains more than one story
for a film, you can select the story you wish to
enjoy. The operation procedures vary with the
disc; observe the instructions for selecting a story
provided during playback.
Dolby digital
Dolby digital enables up to 5.1 independent multi-
channel audio reproduction, the same type of
surround system that is used in movie theaters.
Multi-sound function
DVD video can store up to 8 languages for one
film; select the language of your preference.
• The languages stored on the disc are indicated
by the icon shown below.
DTS
DTS (Digital Theater System) is a digital sound
compression technique developed by Digital
Theater Systems, Inc.
This low sound compression format delivers a
large amount of data and makes it possible to
reproduce a high quality sound.
Menu screens
Menus can be called up during DVD video
playback to perform menu setting.
Multi-angle function
A DVD video that is filmed from multiple angles
allows you to select the angle of choice.
• The number of recorded angles are indicated
by the icon shown below.
• Example showing menu display
Subpicture (subtitles) function
A DVD video can record subtitles for up to 32
languages and you can select the language of
the subtitles you wish to see.
• The number of recorded subtitle languages are
indicated by the icon shown below.
20
VRX765VDDownload from Www.Somanuals.com. All Manuals Search And Download.
Discs
Playable discs
This DVD video player can play the following
discs.
Discs that cannot be played back
This DVD video player cannot play back DVD-
Audio, DVD-RAM, Photo CDs, etc.
Note:
• It may also not be possible to play back CDs
recorded on a CD-R unit and CD-RW unit. (Cause:
disc characteristics, cracks, dust/dirt, dust/dirt on
player’s lens, etc.)
• If a CD-R or CD-RW disc that has not been
finalized is played, it will take a long time to start
playing. Also, it may not be possible to play
depending on its recording conditions.
• You cannot play Super Audio CDs. Playback of the
CD player is not supported even if it is a hybrid
disc.
Playable discs
DVD video discs
video CDs
CD TEXT
WMA
Audio CDs
MP3 ID3 TAG
About CD Extra discs
About MP3/WMA playback
This unit can play back CD-R/CD-RW, DVD-R/
RW and DVD+R/RW discs on which MP3/WMA
music data have been recorded.
For a detailed information, see the section
entitled “Listening to an MP3/WMA” (page 43).
A CD Extra disc is a disc in which a total of two
sessions have been recorded. The first session is
Audio session and the second session is Data
session.
Your personally-created CDs with more than
second data sessions recorded cannot be played
on this DVD video player.
Note:
Note on region numbers
• When you play a CD Extra disc, only the first
session will be recognized.
The DVD video system assigns a region number
to DVD video players and DVD discs by sales
area. DVD video players sold in the United States
can play back DVD discs with the region number
“ALL”, “1” or any combination of numbers that
also incorporate a “1”.
About playing a CD-R/CD-RW disc
(MP3, WMA)
This player can play CD-R/CD-RW discs
previously recorded in music CD format (MP3,
WMA) or video CD format.
The DVD video region number is marked on the
disc jacket as shown below.
About playing a DVD-R/RW or
DVD+R/RW disc
This player cannot play DVD-R/RW and DVD+R/
RW discs previously recorded in video CD
format.
1
4
ALL
1
6
However, MP3/WMA files recorded on DVD-R/
RW and DVD+R/RW discs can be played.
About the registered marks etc.
• This product incorporates copyright protection
technology that is protected by U.S. patents
and other intellectual property rights. Use of
this copyright protection technology must be
authorized by Macrovision, and is intended for
home and other limited viewing uses only
unless otherwise authorized by Macrovision.
Reverse engineering or disassembly is
prohibited.
• Manufactured under license from Dolby
Laboratories.
“Dolby”, and the double-D symbol are
trademarks of Dolby Laboratories.
• “DTS” and “DTS Digital Out” are trademarks of
Digital Theater Systems, Inc.
• “iPod” is for legal or rightholder-authorized
copying only. Do not steal music.
21
Download from Www.Somanuals.com. All Manuals Search And Download.VRX765VD
10.OPERATIONS
Basic Operations
Note:
Selecting a mode
Be sure to read this chapter referring to the chapter
“3. CONTROLS” on page 5.
When the liquid crystal panel is
open
CAUTION
CAUTION
1. Press the [SRC] button to display the Source
When the unit is turned on, starting and
stopping the engine with its volume raised to
the maximum level may harm your hearings.
Be careful about adjusting the volume.
menu.
* External equipment not connected to this unit
is not displayed.
2. Touch the desired mode key.
Turning on and off the power
Note:
When the liquid crystal panel is
closed
• Start the engine before using this unit.
• Be careful about using this unit for a long time
without running the engine. If you drain the car’s
battery too far, you may not be able to start the
engine and this can reduce the service life of the
battery.
1. Press the [SRC] button to change the
operation mode.
Each time you press the [SRC] button, the
operation mode changes in the following
order:
TUNER mode ➜ (Satellite Radio mode) ➜
DVD PLAYER mode ➜ (CD CHANGER
mode) ➜ (DVD CHANGER mode) ➜ (TV/
VTR mode) ➜ VISUAL mode ➜ (iPod mode)
➜ TUNER mode...
1. Start the engine. The illuminations on this unit
light up.
Engine ON
position
* External equipment not connected to this unit
will not be selected.
* When 2-ZONE function is ON, the [SRC]
button operates only for the MAIN zone. To
switch to a SUB zone source, specify from the
Source menu screen, or use the optional
remote control unit.
2. Press the [SRC] button. When the liquid
crystal panel is not open, press the [P]
(OPEN) button to turn on the power. The unit
automatically memorizes its last operation
mode and will automatically switch to display
that mode.
Adjusting the volume
1. Press the [E]/[e] buttons to adjust the
volume.
3. To turn off the power, press and hold the
[SRC] button for more than 1 second.
[E]: Increases the volume.
[e]: Decreases the volume.
* The volume level indicated in the display is in a
range from 0 (min.) to 33 (max.).
CAUTION
CAUTION
While driving, keep the volume level at which
external sounds can be heard.
22
VRX765VDDownload from Www.Somanuals.com. All Manuals Search And Download.
Basic Operations
Mute
1. When in the TUNER, Satellite Radio, VISUAL
or TV mode, press the [p] button to turn
the mute on and off.
70˚
When in the DVD PLAYER, iPod or changer
mode, keep pressing the [p] button more
than 1 second to turn the mute on and off.
* When the mute is turned on, “MUTE” appears
at the bottom left of the screen.
Opening and turning the liquid
crystal panel
Panel calibration function
The liquid crystal panel’s maximum angle of
inclination can be adjusted to match the
installation configuration within the automobile.
• Perform this with the panel in its closed
position.
WARNING
• To prevent the battery from going dead,
operate this unit with the engine running
if possible.
1. Keep pressing the [P] (OPEN) button more
than 5 seconds.
• When the liquid crystal panel is
operating, be careful not to get your hand
or finger caught between the panel and
main unit or the instrument panel of the
car.
The electronic beep will be heard.
After the beep sounds twice, the panel will
come out and stand up to the maximum angle.
After completion of the calibration, the panel
will be housed into the unit automatically.
• Do not move the liquid crystal panel by
hand.
* If the panel does not strike the instrument
panel or other parts of the car during
calibration, the maximum inclination will be
110°.
Standing up the liquid crystal panel
1. Press the [P] (OPEN) button.
The liquid crystal panel comes out and stands
up automatically.
* If the panel strikes a car part during calibration
within a range of 70° inclination, the maximum
downward inclination will be 70°.
The power of this unit will be turned on.
Note:
• If the liquid crystal panel stops in the middle of its
operation, press the [P] (OPEN) button to house
the panel and press the button again to raise it.
The unit will enter the same display mode as the
display was in when last turned off.
23
Download from Www.Somanuals.com. All Manuals Search And Download.VRX765VD
Basic Operations
Adjusting the angle of the liquid
crystal panel
The angle of the liquid crystal panel can be
adjusted depending on the mounting angle of the
unit or light coming into the car.
1. Turn the power on. When the liquid crystal
panel is closed, press the [P] (OPEN)
button.
2. Press the [ADJ] button, touch the [MONITOR]
key, and then touch [C] key to display the
following screen:
Turning the liquid crystal panel
horizontal (Airconditioneroperation
mode)
When the way the liquid crystal panel is mounted
hinders the operation of the air conditioner, the
position of the panel can be turned horizontal
temporarily.
1. Keep pressing the [P] (OPEN) button more
than 2 seconds when the liquid crystal panel
is open.
A beep sounds and the liquid crystal panel
turns horizontal.
* Press the [P] (OPEN) button again for the
panel to return to the original position.
* The unit can be set so that the panel returns to
the original position after a set time in the
horizontal position (See page 28).
Adjusting the AUDIO
3. Repeat touching the [0] key to adjust the
angle of the liquid crystal panel. Every
touching the [0] key tilts the liquid crystal
panel forward or backward.
Note:
• When the optional 5.1 ch Surround Decoder
(DVH940) is used, the following tone adjustments
cannot be made. To adjust the tone, refer to the
section “5.1 ch Surround Decoder Operations”.
The adjusted angle is stored in memory.
* Adjustment is possible within the range 70° to
110°.
1. Press the [ADJ] button, then touch the
[AUDIO] key.
* There are 5 adjustable angle available.
MAX 110˚
70˚
2. Touch the item key to adjust.
3. Perform the adjustment.
See the following sections for detail.
4. Touch the [Back] key to return to the previous
screen.
Housing the liquid crystal panel
1. Press the [P] (OPEN) button.
The liquid crystal panel is housed
automatically.
* In the following sections, only the details
regarding adjustments are described,
procedures to select items are skipped.
Note:
• When leaving this unit unused for a long period of
time or leaving your car, be sure to house the liquid
crystal panel.
24
VRX765VDDownload from Www.Somanuals.com. All Manuals Search And Download.
Basic Operations
Adjusting the balance/fader
Adjusting the MID
The MID gain, MID frequency (center frequency)
and MID Q can be adjusted as follows.
2-1. Touch the []] key of the BAL/FAD item.
3-1. Touch the [{] or [}] key to adjust to the
2-1. Touch the []] key of the MID item.
fader level.
3-1. When the AUDIO MID screen is displayed,
touch the [[] or []] key for the desirable type
to adjust to a desirable level.
* The factory default setting is “0”. (Adjustment
range: front 12 to rear 12)
[{] :
GAIN :
Emphasized the sound from the front
speakers.
–6 to 6 (The factory default setting is “0”.)
FREQ. :
[}] :
700Hz, 1kHz, 2kHz (The factory default
setting is “1kHz”.)
Emphasized the sound from the rear
speakers.
Q :
3-2. Touch the [[] or []] key to adjust to the
1.5, 2 (The factory default setting is “2”.)
balance level.
* The factory default setting is “0”. (Adjustment
range: left 13 to right 13)
Adjusting the TREBLE
The treble gain and treble frequency (center
frequency) can be adjusted as follows.
[[] :
Emphasized the sound from the left
speakers.
2-1. Touch the []] key of the TREBLE item.
[]] :
3-1. When the AUDIO TREBLE screen is
displayed, touch the [[] or []] key for the
desirable type to adjust to a desirable level.
Emphasized the sound from the right
speakers.
GAIN :
Adjusting the BASS
The bass gain, bass frequency (center
frequency) and bass Q can be adjusted as
follows.
–6 to 6 (The factory default setting is “0”.)
FREQ. :
8kHz, 12kHz (The factory default setting is
“12kHz”.)
2-1. Touch the []] key of the BASS item.
3-1. When the AUDIO BASS screen is
displayed, touch the [[] or []] key for the
desirable type to adjust to a desirable level.
Adjusting the non fader output
volume
You can adjust the volume output from the unit’s
non fader output terminal.
GAIN :
–6 to 8 (The factory default setting is “0”.)
2-1/ Touch the [[] or []] key of the NON FADER
3-1. VOL item to adjust to desirable level.
FREQ. :
50Hz, 80Hz, 120Hz (The factory default
setting is “50Hz”.)
Setting range :
–6 to 6 (The factory default setting is “0”.)
Q :
1, 1.25, 1.5, 2 (The factory default setting is
“1”.)
25
Download from Www.Somanuals.com. All Manuals Search And Download.VRX765VD
Basic Operations
Turning on/off the MAGNA BASS
EXTEND
The Magna Bass Extend does not adjust the low
sound area like the normal sound adjustment
function, but emphasizes the deep bass sound
area to provide you with a dynamic sound.
Adjusting the brightness, color, hue
and dimmer level
Note:
• This function is not available when the liquid crystal
panel is closed.
• The Color and Hue settings can be adjusted only
in the DVD video, Video CD, TV/VTR, VISUAL and
DVD changer modes, and only when the car is
stopped and the parking brake is applied.
• The Hue setting can be adjusted only when the
NTSC mode is selected.
2-1. Touch the [C] key to display the next menu
screen.
3-1. Touch [ON] or [OFF] of the [M-B EX] item to
turn the Magna Bass Extend effect on or off
(The factory default setting is “OFF”).
2-1. Touch the []] key of the MONI ADJ item to
display the MONI ADJ screen.
* This screen can also be displayed directly by
pressing the [MONI] button.
Adjusting the MONITOR
1. Press the [ADJ] button, then touch the
[MONITOR] key.
2-2. Touch the [Bright] key repeatedly to select
the adjustment type. Every pressing it
changes adjustment type as follows:
[Bright] ➜ [Color] ➜ [Hue] ➜ [Dimmer] ➜
[Bright] ...
“Bright” :
Adjusts the brightness of the display.
“Color” :
Adjusts the color saturation.
“Hue” :
2. Perform the adjustment for the desired item.
See the following sections for detail.
Adjusts the tone of color (red is emphasized
or green is emphasized).
3. Touch the [Back] key to return to the previous
“Dimmer” :
Adjusts the panel brightness when the car
lights are ON/OFF.
screen.
* In the following sections, only the details
regarding adjustments are described,
procedures to select items are skipped.
The factory default setting is :
When the car light is off: brightest setting (58
steps)
When the car light is on :
medium brightness (29 steps)
2-3. Touch [[] or []] key to adjust a level.
“Bright”
[]] : Press to make image brighter.
[[] : Press to make image dimmer.
“Color”
[]] : Press to increase color depth.
[[] : Press to decrease color depth.
“Hue”
[]] : Press to make image brighter.
[[] : Press to make image dimmer.
“Dimmer”
[]] : Press to make image brighter.
[[] : Press to make image dimmer.
26
VRX765VDDownload from Www.Somanuals.com. All Manuals Search And Download.
Basic Operations
Warning display when CCD camera
is installed
When a TV tuner (optional) is installed together
with optional CCD camera, the following warning
message is displayed during use of the CCD
camera: “Make sure of safety around your
vehicle”.
Front monitor lock
When an external device is connected to the
Visual terminal, lock the front monitor to show the
visual input source.
1. Keep pressing the [ADJ] button more than 1
second to set the monitor lock.
The front monitor screen is locked to show the
visual input source.
2. To cancel the monitor lock, press the [ADJ]
button.
2-1. Touch the [ON] or [OFF] key of the
CAMERA WARNING item to turn this
function on or off (The factory default setting
is “ON”).
The screen returns to show the image of the
selected mode.
Switching the VTR system between
NTSC and PAL
Adjusting the GENERAL
1. Press the [ADJ] button, then touch the
[GENERAL] key.
Note:
• This function is enabled only when the panel is
open.
• This setting is applied only to the VISUAL/VTR
input mode.
2-1. Touch the [NTSC] or [PAL] key of the
NTSC/PAL item to set the VTR system (The
factory default setting is “NTSC”).
Changing the color of the title and
command bars in the screen
2. Perform the adjustment for the desired item.
See the following sections for detail.
2-1. Touch the [AUTO], [DAY] or [NIGHT] key of
the COLOR item to set the color mode (The
factory default setting is “AUTO”).
3. Touch the [Back] key to return to the previous
screen.
* In the following sections, only the details
regarding adjustments are described,
procedures to select items are skipped.
“AUTO” :
The color is changed according to the status
of the car light:
When the car light is off: light gray color
When the car light is on: dark gray color
Clock Adjustment
“DAY” :
2-1. Touch the []] key of the CLOCK item.
Set to the light gray color.
2-2. Touch the [{] and [}] keys under the Hour,
Minute and a.m./p.m. box to adjust the time,
then touch the [SET] key (The factory
default setting is “1:00 a.m.”).
“NIGHT” :
Set to the dark gray color.
Turning on/off the motion of the
background picture
2-1. Touch the [ON] or [OFF] key of the MOTION
item to set the function (The factory default
setting is “ON”).
* The time is displayed in 12-hour format.
Setting the BEEP
The sound heard when you make operations is
called “beep”. The unit can be set up so that it
does not produce this beep sound.
* The factory default setting is “BEEP ON”.
2-1. Touch the [ON] or [OFF] key of the BEEP
item to turn the function on or off.
27
Download from Www.Somanuals.com. All Manuals Search And Download.VRX765VD
Basic Operations
Switching CONNECT (connect)
Make the following settings when an external
device is connected to the Visual terminal.
Setting the Auto Panel
When you remove or attach the DCP
(Detachable Control Panel), you can set the
liquid crystal panel automatically housing or
opening.
NAVI :
when a navigation system is connected.
* The factory default setting is “ON”.
* When the navigation system is connected, use the
monitor lock function. Locking the monitor locks
the screen size in F.WIDE mode (full wide) and the
VTR system to NTSC.
2-1. Touch the [C] key to display the next menu
screen.
2-2. Touch the [ON], [OFF] or [CLOSE] key of
the AUTO PANEL item to set to “ON”, “OFF”
or “CLOSE”.
OTHER :
for external devices other than a navigation
system.
ON :
NONE :
The liquid crystal panel houses
automatically after removing the DCP.
And the liquid crystal panel opens
automatically after attaching the DCP.
when no external device is connected.
* The factory default setting is “NONE”.
2-1. Touch the [NAVI], [OTHER] or [NONE] key
of the CONNECT item to set the function to
“NAVI”, “OTHER” or “NONE”.
OFF :
Normal operation.
CLOSE :
Setting the Blink LED
You can set the unit to blink the LED indication
when the DCP (Detachable Control Panel) is
removed.
The liquid crystal panel houses
automatically after removing the DCP.
Setting the time of air conditioner
operation mode
This setting can be used to adjust the time the
panel stays in the horizontal position when in the
air conditioner operation mode.
2-1. Touch the [ON] or [OFF] key of the BLINK
LED item to turn the function on or off (The
factory default setting is “OFF”).
* The factory default setting is 10 seconds.
Performing the system check
2-1. Touch the [C] key to display the next menu
2-1. Touch the []] key of the SYSTEM CHECK
screen.
item.
The available operation mode is listed in
white letters.
2-2. Touch the [5s], [10s] or [30s] key of the
HVAC MODE item to set the time to “5
seconds”, “10 seconds” or “30 seconds”.
2-2. Touch [Check] key at the top right of the
screen to perform the system check
manually.
The system will be restarted after
performing the system check.
28
VRX765VDDownload from Www.Somanuals.com. All Manuals Search And Download.
Basic Operations
Setting the 2-ZONE function
2-ZONE Function
About the 2-ZONE function
* The factory default setting is “OFF”.
1. Press the [SRC] button to display the Source
menu.
The 2-ZONE function is a function that outputs
separate sounds/images from the MAIN zone
and SUB zone (such as the optional rear monitor)
by simultaneously operating two sources in the
one center unit. Thereby, plural listeners are
allowed to enjoy separate audio/visual sources.
The 2-ZONE function allows internal sources
(TUNER, DVD, VISUAL, iPod) and external
sources via CeNET connection (CD changer, TV,
Satellite Radio, etc.) to be played on MAIN zone
and SUB zone.
2. Touch and hold the [2 ZONE] key more than
1 second to turn the 2-ZONE function on.
The 2-ZONE indication is displayed at the top
left of the screen.
* The function can also be switched by using the
optional remote control unit. See the chapter “6.
REMOTE CONTROL” for details.
Controlling sources of MAIN zone and SUB zone
can be made from the main unit and from the
remote control unit.
The source sounds of the MAIN zone are played
back from the speakers of the vehicle side, and
those of the SUB zone are from the headphone
systems (WH104).
Sound volume control on the SUB zone is
performed by the headphone system (WH104).
2-ZONE indication
Displayed when 2-ZONE function is
turned on.
Note:
• [MAIN]:MAIN zone is selected.
• [SUB]:SUB zone is selected.
• Radio stations cannot be selected when the SUB
zone is selected.
• The external different equipments connected via
CeNET cannot simultaneously be used in the
MAIN and SUB zones. Though the same
equipment can be specified simultaneously.
• If the 5.1 channel surround decoder (DVC940) is
connected, this function is disabled.
• When an external equipment is specified for the
SUB zone, the 2-ZONE function is turned off if the
function of audio mute for cellular phone is turned
on or off.
3. Touch the [SUB] key on the Source menu to
switch to the SUB zone.
You can control the operation modes for the
SUB zone.
4. Press the [SRC] button, and touch the [MAIN]
key to return to the MAIN zone.
5. To turn the 2-ZONE function off, touch the [2
ZONE] key on the Source menu.
• The SUB zone cannot be controlled when the
function of audio mute for cellular phone is turned
on.
29
Download from Www.Somanuals.com. All Manuals Search And Download.VRX765VD
Basic Operations
Monitor image and sound with 2-ZONE ON/OFF
●With 2-ZONE function OFF
Front monitor lock ON
Front monitor lock OFF
Visual Visual
Visual
Visual
connection
[OTHER] (*1)
connection
[NAVI] (*1)
connection
connection
[OTHER] (*1)
[NAVI] (*1)
Front monitor
(liquid crystal
panel)
Displays image of Displays image of Displays image of mode selected from
device connected device connected the Source menu.
to the Visual
to the Visual
terminal.
terminal. (*3)
Rear monitor
(optional)
Displays image of mode selected from the Source menu. (*2)
Audio output
Sound from mode selected from the Source menu is output from 4ch speaker,
NON-FADER, and AUDIO-OUT.
●With 2-ZONE function ON
Front monitor lock ON
Visual
Front monitor lock OFF
Visual Visual
Visual
connection
connection
connection
connection
[OTHER] (*1)
[NAVI] (*1)
[OTHER] (*1)
[NAVI] (*1)
Front monitor
(liquid crystal
panel)
Displays image of Displays image of Displays image of mode selected from
device connected device connected the Source menu in the MAIN zone
to the Visual
to the Visual
terminal.
mode.
terminal. (*3)
Rear monitor
(optional)
Displays image of mode selected from the Source menu in the SUB zone mode.
(*2)
Audio output
• Sound from mode selected in the MAIN zone mode is output from 4ch speaker,
NON-FADER and AUDIO-OUT.
• Sound from mode selected in the SUB zone mode is output from SUB-OUT.
*1:A device connected to the Visual terminal should be set up as described in the section “Switching
CONNECT (connect)”.
*2:No image is displayed on the rear monitor when a non-image mode such as CD changer mode, etc.
is selected.
*3:For safety reasons, this image is not displayed when the vehicle is moving. The picture can be
watched only when the vehicle is stopped and the parking brake is applied.
30
VRX765VDDownload from Www.Somanuals.com. All Manuals Search And Download.
Radio Operations
Listening to the radio
Selecting stations by entering
frequency
This function displays the Key Pad on the screen
allowing you to tune by entering a frequency.
1. Press the [SRC] button, and touch the
[TUNER] key.
The TUNER mode screen is displayed.
1. Press the [BAND] button or touch the [Band]
key to select the desired band (FM or AM).
2. Touch the [Search] key to display the Key
Pad screen.
2. Press the [BAND] button or touch the [Band]
key to select the radio band. Each time the
button is pressed, the radio reception band
changes in the following order:
FM1 ➜ FM2 ➜ FM3 ➜ AM ➜ FM1...
3. Press the [R] or [F] button to tune in the
3. Touch the [0]~[9] key corresponding with the
frequency you desired. When you input the
wrong number, touch the [CLR] key to delete
the last input number.
4. Touch the [ENT] key to tune in to the entered
frequency.
5. Touch the [Back] key.
previous or next preset station.
Seek tuning
1. Press the [BAND] button or touch the [Band]
key to select the desired band (FM or AM).
2. If “MANU” is displayed at the bottom of the
display, keep pressing the [BAND] button
more than 1 second.
Manual tuning
There are 2 ways available: Quick tuning and
step tuning.
When you are in the step tuning mode, the
frequency changes one step at a time. In quick
tuning mode, you can quickly tune the desired
frequency.
“MANU” in the display goes off, and seek
tuning is now available.
* The same operation is available by using the
[Band] key.
3. Touch the [X] or [x] key to automatically
seek a station.
1. Press the [BAND] button or touch the [Band]
• When touching the [x] key, the station is
sought in the direction of higher
frequencies.
• When touching the [X] key, the station is
sought in the direction of lower frequencies.
key to select the desired band (FM or AM).
2. If “MANU” is not displayed at the bottom of the
display, keep pressing the [BAND] button
more than 1 second.
“MANU” appears in the display, and manual
tuning is now available.
* The same operation is available by using the
[Band] key.
3. Tune into a station.
Quick tuning :
Touch and hold the [X] or [x] key for more
than 1 second to tune in a station.
Step tuning:
Touch the [X] or [x] key to manually tune in
a station.
31
Download from Www.Somanuals.com. All Manuals Search And Download.VRX765VD
Radio Operations
Recalling a preset station
There are total of 24 preset positions (6-FM1, 6-
FM2, 6-FM3, 6-AM) to store individual radio
stations in memory.
There are 2 ways available to recall the preset
station.
Auto store
Auto store is a function for storing up to 6 stations
that are automatically tuned in sequentially. If 6
receivable stations cannot be received, a
previously stored station remains unoverwritten
at the memory position.
1. Touch the [Band] key to select the desired
●Using the [R] or [F] button
band. (FM or AM)
1. Press the [BAND] button to select the desired
2. Touch the [List] key.
band (FM or AM).
3. Touch and hold the [AS] key for more than 2
seconds.
2. Press the [R] or [F] button to recall the
previous or next stored station.
A beep sounds and the stations with good
reception are stored automatically to the
preset channels.
●Using the Preset List screen
1. Touch the [List] key.
Preset scan
Preset scan receives the stations stored in preset
memory in order. This function is useful when
searching for desired station in memory.
1. Touch the [List] key.
2. Touch the [PS] key to start preset scan. The
unit starts scanning each station for 7
seconds sequentially.
3. When the desired station is tuned in, touch the
[PS] key again to continue receiving that
station.
2. Touch the corresponding Preset key to recall
the stored station.
* You can select the desired band by touching
the [Band] key.
* Touching and holding the desired Preset key
for more than 2 seconds will store the current
station to the preset memory.
Instant station recall (ISR)
Instant station recall is a special radio preset that
instantly accesses a favorite radio station at a
touch of a button. The ISR function even
operates with the unit in other modes.
3. Touch the [List] key to return to the previous
screen.
●ISR memory
1. Select the station that you wish to store in ISR
memory.
2. Keep pressing the [ISR] button more than 2
seconds to store the current station into the
ISR memory.
Manual memory
1. Touch the [Band] key to select the desired
band. (FM or AM)
2. Select the desired station with seek tuning,
manual tuning, or preset tuning.
3. Touch the [List] key.
●Recalling a station with ISR
4. Touch and hold one of the Preset key for more
than 2 seconds to store the current station into
the preset memory.
1. In any mode, press the [ISR] button to switch
to the TUNER mode and tune the selected
radio station. “ISR” appears in the display.
Press the [ISR] button again to return to the
previous mode.
* The [ISR] button is disabled when SUB zone is
selected in the 2-ZONE mode.
32
VRX765VDDownload from Www.Somanuals.com. All Manuals Search And Download.
DVD Video Player Operations
Setting up the screen size
Set up the screen size according to the rear view
monitor which is connected to this unit.
Changing DVD System
Settings
Note:
4-1. Touch the [WIDE], [N PS] or [N LB] key of
the TV DISPLAY item to change the screen
size to “WIDE”, “N PS” or “N LB”.
• If the Setup operation is performed in the middle of
DVD video play, the disc will restart from
beginning.
• The settings on the DVD SETUP menu cannot be
set with the remote control unit.
* The factory default setting is “WIDE”.
●When watching through a conventional
type of the rear view monitor (4:3)
N PS :
Selecting the DVD SETUP menu
1. Press the [SRC] button, and touch the [DVD
PLAYER] key.
The leftmost and rightmost areas of the screen
are cut off.
The DVD PLAYER mode screen is displayed.
2. Touch the [Option] key to display the Option
menu.
3. Touch the [Setup] key to display the DVD
SETUP menu.
This function allows displaying the important
part of image fully on the screen. In some
cases, image is displayed while being panned
(scrolled).
N LB :
A black zone is created in the top and bottom
areas of the screen.
Touch the [C] key to display the next menu.
Touch the [c] key to return to the previous
menu.
This method displays Cinema Scope and Vista
Vision images without cutting them off by
creating a black zone on the top and bottom
gaps.
●When watching through a wide type of the
rear view monitor (16:9)
4. Perform setting for the desired setting items.
See the following sections for detail.
5. Touch the [Back] key.
* In the following sections, only the details
regarding settings are described, the
procedures to select items are skipped.
Setting up the angle mark display
You can set up so that the angle mark appears on
scenes where the angles can be switched.
4-1. Touch the [ON] or [OFF] key of the ANGLE
item to turn the Angle function “ON” or
“OFF”.
* The factory default setting is “OFF”.
33
Download from Www.Somanuals.com. All Manuals Search And Download.VRX765VD
DVD Video Player Operations
Setting up the disc menu language
Setting up the country code
Set up the country number for setting up of the
parental level.
4-1. Touch the []] key of MENU LANGUAGE
item.
The MENU LANGUAGE menu is displayed.
4-1. Touch the []] key of PARENTAL LOCALE
item.
4-2. Touch the key to select a desired language
to set it.
The PARENTAL LOCALE screen is
displayed.
* The factory default setting is “ENGLISH”.
4-2. Touch the ten-key (0 to 9) to input a 4-digit
country code.
Setting up the audio language
* The factory default setting is “8583” (U.S.A).
4-1. Touch the []] key of AUDIO LANGUAGE
item.
The AUDIO LANGUAGE menu is displayed.
4-2. Touch the key to select a desired language
to set it.
* The factory default setting is “ENGLISH”.
Setting up the subtitle language
4-1. Touch the []] key of SUBTITLE LANGUAGE
item.
The SUBTITLE LANGUAGE menu is
displayed.
4-3. Touch the [ENT] key.
4-2. Touch the key to select a desired language
to set it.
Setting up the parental level
You can change the level of parental lock (audio-
visual restriction).
* The factory default setting is “ENGLISH”.
This function allows cutting scenes that are
unfavorable for children or replacing them
automatically with other scenes prepared in
advance. For example, by replacing scenes of
radical violence or portrayals of sex with safe
scenes, you can make a trouble-free story as if it
were so from the beginning.
Setting up the password for setting
up of the parental level
4-1. Touch the []] key of PASSWORD item.
The PASSWORD screen is displayed.
4-2. Touch the ten-key (0 to 9) to input a 4-digit
password.
4-1. Touch the [[] or []] key of PARENTAL
LEVEL item.
• Input the old password, and touch the
[ENT] key.
* The factory default setting is “0000”.
* Input “4356” to return password to “0000”.
• Input a new password, and touch the
[ENT] key.
When you touch the [[] or []] key,
PASSWORD input screen is displayed.
4-2. Touch the ten-key (0 to 9) to input a 4-digit
password, and touch the [ENT] key.
* The factory default setting of the password is
“0000”.
Note:
• When a disc with view restrictions is inserted, you
will be prompted to input a password. The disc will
not be viewable until the correct password is
entered.
4-3. Touch the [[] or []] key to select level 1 to 8,
or 0 (no parental).
* The factory default setting is “8”.
34
VRX765VDDownload from Www.Somanuals.com. All Manuals Search And Download.
DVD Video Player Operations
The relationship between DVD video category
codes and parental level are shown in the table
below. Use this table when setting the parental
level.
WARNING
• Some videos may be recorded at higher
than desired volume levels. Increase the
volume gradually from the minimal
LEVEL7 NC-17
(NO ONE 17 AND UNDER
ADMITTED)
setting after the video has started.
• For your safety, the driver should not
watch the video or operate the controls
while driving. Please note that watching
and operating the video while driving are
prohibited by law in some countries.
LEVEL6
R
(RESTRICTED)
LEVEL4 PG-13
(PARENTS STRONGLY
CAUTIONED)
Note:
• For your safety, the VRX765VD has a safety
function which turns off the picture when the car is
moving, so only the audio can be heard. The
picture can only be watched when the car is
stopped and the parking brake is applied.
• If “AUDIO ONLY” appears on the screen just after
turning on the ACC power of the car, release the
parking brake while confirming safety, and then
engage the parking brake again.
LEVEL3 PG
(PARENTAL GUIDANCE
SUGGESTED)
LEVEL1
G
(GENERAL AUDIENCES)
• The contents that the parental level restricts
vary with the country code.
Pausing play
1. Press the [p] button or touch the [p]
key to pause play.
“PAUSE” appears in the display.
2. To resume disc play, press the [p] button
Basic Operations
Loading a disc
1. Insert a disc into the center of the insertion
slot with the label side facing up. The disc
plays automatically after loading.
again.
Note:
Ejecting a disc
1. Press the [o] (EJECT) button to eject disc.
“EJECT” appears in the display. The play
mode then switches to the TUNER mode.
• Never insert foreign objects into the disc insertion
slot.
• If the disc is not inserted easily, there may be
another disc in the mechanism or the unit may
require service.
* If a disc is left in the ejected position for 15
seconds, the disc is automatically reloaded
(Auto reload). In this case, however, the play
mode will remain set to the TUNER mode.
• 8 cm (single play) discs cannot be used.
CAUTION
CAUTION
With the screen open, a driver may not be
able to see the disc insertion slot. For your
safety, insert a disc with the screen closed.
Note:
• If you force a disc into before auto reloading, this
can damage the disc.
Watching/Listening to a disc already
inserted
1. Press the [SRC] button, and touch the [DVD
PLAYER] key to select the DVD PLAYER
mode.
Play starts automatically.
If no disc is loaded in the unit, “NO DISC”
appears in the display.
35
Download from Www.Somanuals.com. All Manuals Search And Download.VRX765VD
DVD Video Player Operations
DVD Video Operations
Watching a DVD-Video
Operating the DVD menu
You can select the button items displayed in the
DVD menu by directly touching it.
If the button items are hard to select correctly,
you can also operate them by displaying Key Pad
on the screen.
After disc loading, the play mode is automatically
engaged.
• When playback is not started, press the [p]
button or touch the [p] key.
• Button operation may differ depending on the
story of the disc.
* When the Key Pad is displayed, direct operation of
the button items is disabled.
* Direct operation of the button items is enabled
only when the screen size is set to “WIDE” (see
page 33).
●After the menu screen is displayed
1. Press the [CONT.] button.
For normal DVD-Video discs, the DVD menu
screen appears.
After the DVD menu screen is displayed, select
an item in the following operations and play it
back.
The “Cross-Key” ({}[ ]) is displayed.
• Repeat pressing the [CONT.] button
changes the mode as follows: Cross-Key
mode ➜ Ten-Key mode ➜ Direct operation
mode ➜ Cross-Key mode ...
2. Select the DVD menu button items use either
the “Cross-Key” or the “Ten-Key” according
to the disc contents menu.
Showing the DVD PLAYER mode
screen
The DVD PLAYER mode screen is used to
control the playback mode from the screen.
3. Touch the [ENT] key to specify the selected
button item.
1. Touch the screen.
The DVD PLAYER mode screen is displayed.
If you do not touch the screen for 7 seconds,
the display will return to the playback screen.
Switching Key Pad position
When the Key Pad becomes difficult to view in
the menu display, you can move it to the other
side of the screen.
Showing the DVD menu
1. Press the [MENU] button during playback.
Key PAD
The DVD menu appears.
* The displayed contents may differ depending
on the DVD software.
• The same operation can be performed by
touching the [Menu] key from the DVD
PLAYER mode screen.
• Example showing DVD menu display
Key PAD
36
VRX765VDDownload from Www.Somanuals.com. All Manuals Search And Download.
DVD Video Player Operations
Stopping playback
1. Showing the DVD PLAYER mode screen,
touch and hold the [p] key for more than 1
second during playback.
Skipping a chapter (searching)
About chapter
Chapter means a small segment to divide the
data area of the disc.
Playback is stopped.
1. Press the [R] or [F] button during
playback.
2. To resume playback, touch the [p] key.
Playback resumes from the scene where
playback is stopped.
Chapters are skipped, as many as the times
the button is pressed, and playback starts.
Current
location
Pausing playback
1. Press the [p] button or touch the [p]
key during playback.
Playback pauses.
2. To resume playback, press the [p] button
Chapter
up
Chapter
down
Chapter
again.
Playback resumes.
• Pressing the [F] button starts playback
from the beginning of the next chapter.
• Pressing the [R] button starts playback
from the beginning of the current chapter.
When this button is pressed again within
about 2 seconds, playback starts from the
beginning of the previous chapter.
• The unit may return to the DVD PLAYER
mode screen when the [F] or [R]
button is pressed.
Slow playback
1. Press the [p] button or touch the [p]
key, then press and hold the [F] button.
While pressing the button, slow playback
continues at the speed 1/3 times the normal
playback.
Releasing the button resumes to the normal
playback.
• Slow playback cannot be performed in the
backward direction. In addition, audio
cannot be reproduced during slow
playback.
Fast forward and fast backward
1. Press and hold the [R] or [F] button
during playback.
The playback speed becomes 5-time faster
first and then 20-time faster 3 seconds later.
• No audio is reproduced during fast forward
and fast backward operation.
• The fast forward and fast backward speed
may differ depending on the disc.
• The DVD PLAYER mode screen may
appear when the [R] or [F] button is
pressed.
37
Download from Www.Somanuals.com. All Manuals Search And Download.VRX765VD
DVD Video Player Operations
Searching with a chapter/title
number
You can locate the beginning of a scene using
the chapter numbers or title numbers recorded
on the DVD-Video disc.
Repeat playback
This operation plays back chapters recorded on
the DVD-Video repeatedly.
1. Showing the DVD PLAYER mode screen,
touch the [Option] key.
2. Touch the [CHAPTER REPEAT] key, then
touch the [Back] key.
1. Showing the DVD PLAYER mode screen,
touch the [Search] key.
The message “C.RPT” will be displayed.
The Key Pad screen appears with the chapter
number input mode. Touching the [Title] key
turns the Key Pad to the title number input
mode.
3. Perform the same operation to turn off the
repeat playback.
• Title
TOP function
The TOP function resets the DVD player to the
first chapter of the track.
A large segment to divide the data area of
the disc.
• Chapter
1. Press the [BAND] button to playback the first
A small segment to divide the data area of
the disc.
chapter (chapter No. 1).
2. Input the number of the title/chapter that you
Using the title menu
want to play back with the [0] to [9] key.
On DVD discs containing two or more titles, you
can select from the title menu for playback.
1. Showing the DVD PLAYER mode screen,
touch the [Top Menu] key during playback.
The title menu screen appears.
3. Touch the [ENT] key.
Playback starts from the scene of the input
title number or chapter number.
• If the input title/chapter number does not
exist or searching with a title/chapter
number is not allowed, the screen image will
not change.
• Depending on the disc, the title menu
cannot be called.
• The same operation can be performed by
pressing and holding the [MENU] button for
more than 1 second.
4. Touch the [Back] key.
Scan playback
Scans and plays back all chapters recorded on
the DVD-Video, the first 10 seconds for each.
2. Select the button items displayed in the title
menu screen by the same way of the DVD
menu operation.
1. Showing the DVD PLAYER mode screen,
• Depending on the disc, items cannot be
selected with the ten-key buttons.
touch the [Option] key.
2. Touch the [CHAPTER SCAN] key, then touch
the [Back] key.
The message “C.SCN” will be displayed.
After scan playback of all chapters on the
disc, chapter scanning through the same disc
is performed again.
Depending on the disc, the menu may appear
again after scan playback of all chapters
within the title.
3. Press the [R] button to turn off the scan
playback.
38
VRX765VDDownload from Www.Somanuals.com. All Manuals Search And Download.
DVD Video Player Operations
Switching among languages
On discs in which two or more audios or audio
languages have been recorded, you can switch
among the audio languages during playback.
Switching angles
On DVD discs in which video images have been
recorded in two or more angles, you can switch
among the angles during playback.
This operation can be performed when the
“Setting up the angle mark display” function
(see page 33) is set to “ON”.
1. Showing the DVD PLAYER mode screen,
touch the [Option] key.
2. Touch the [Audio] key during playback.
• Each time you touch the key, you can switch
among audio languages.
1. Touch the [
] (Angle) key during playback.
Each time you touch the key, you can switch
among angles.
• Depending on the disc, up to 9 angles may
be recorded. For details, see the mark of the
• Depending on the disc, up to 8 audios may
be recorded. For details, see the mark of the
8
disc (
: Indicates that 8 audios have
disc (
: Indicates multi-angle).
been recorded).
• Depending on the disc, angles may switch
smoothly or switch with a momentary still
image.
• When the power is turned on and when the
disc is changed to a new one, the language
set at the time of factory shipment is
selected. If that language has not been
recorded, the language specified on the
disc.
• When the power is turned on and when the
disc is changed to a new one, the language
set as the factory default is selected. If that
language has not been recorded, the
language specified on the disc.
• Depending on the disc, switching may be
completely impossible or impossible on
some scenes.
• It may take time to switch among audios.
• Depending on the disc, switching may be
completely impossible or impossible on
some scenes.
3. Touch the [Back] key to return to the previous
screen.
• It may take time to switch among angles.
• Depending on the disc, scenes recorded in
two or more angles may be played back.
Switching subtitles
On DVD discs in which two or more subtitle
languages have been recorded, you can switch
among the subtitle languages during playback.
Displaying the playback status
1. Showing the DVD PLAYER mode screen,
touch the [Option] key.
2. Touch the [P.Time] key during playback.
3. Touch the [Back] key to return to the previous
screen.
1. Showing the DVD PLAYER mode screen,
touch the [Option] key.
2. Touch the [Sub Title] key during playback.
Each time you touch the key, you can switch
among subtitles.
• Depending on the disc, up to 32 kinds of
subtitles may be recorded. For details, see
the mark of the disc ( : Indicates that 8
kinds of subtitles have been recorded).
• Depending on the disc, switching may be
completely impossible or impossible on
some scenes.
Playback status is displayed on the screen.
8
Title number
Chapter number
Playback time
Title001 Chapter001 00:0019
• It may take time to switch among subtitles.
3. Touch the [Back] key to return to the previous
screen.
To turn off subtitles
1. Repeat touching the [Sub Title] key until “Sub
Title: OFF” is displayed on the screen.
Subtitles are turned off.
39
Download from Www.Somanuals.com. All Manuals Search And Download.VRX765VD
DVD Video Player Operations
Slow playback
1. Press the [p] button then press and hold
the [F] button.
Watching a video CD
After disc loading, the play mode is automatically
engaged.
• Button operation may differ depending on the
story of the disc.
After the menu screen is displayed
For Video CD discs equipped with the PBC (Play
Back Control) function, the menu screen
appears. After the menu screen is displayed,
select an item in the following operations and
play it back.
While pressing the button, slow playback
continues at the speed 1/3 times the normal
playback.
• Slow playback cannot be performed in the
backward direction. In addition, audio
cannot be reproduced during slow
playback.
Skipping a track (searching)
1. Press the [R] or [F] button during
playback.
Showing the V-CD menu (for Video
CD discs with PBC)
The track is skipped and playback starts.
* This key does not function on some discs.
Current
location
1. Touch the screen to display the VIDEO CD
mode screen, then touch the [Menu] key
during playback.
The Video CD menu appears.
The displayed contents may differ, depending
on the Video CD software.
Track
Track
Track
• Example showing menu display
Backward
direction
Playback
direction
• Pressing the [F] button starts playback
from the beginning of the next track.
• Pressing the [R] button starts playback
from the beginning of the current track.
When this button is pressed again within
about 2 seconds, playback starts from the
beginning of the previous track.
• In the case of some discs furnished with
PBC function, when PBC is set to “ON”, this
operation will cause the menu screen to be
displayed.
2. To operate the Video CD menu items, press
the [CONT.] button and use either the “Cross-
Key Pad” or the “Ten-Key Pad” according to
the disc contents menu.
• You can also operate the Video CD menu
by directly touching the menu items.
Fast forward and fast backward
1. Press and hold the [R] or [F] button
during playback.
Pausing playback
1. Press the [p] button. Playback stops.
2. To resume playback, press the [p] button
again.
The playback speed becomes 5-time faster
first and then 20-time faster 3 seconds later.
Releasing the button resumes to the normal
speed playback.
• No audio is reproduced during fast forward
and fast backward operation.
Playback resumes from the scene where
playback is paused.
• The unit may return to the menu screen
when the button is pressed.
40
VRX765VDDownload from Www.Somanuals.com. All Manuals Search And Download.
DVD Video Player Operations
Searching with a track number
This operation allows searching with the track
numbers recorded on the video CDs.
1. Touch the screen to display the VIDEO CD
mode screen.
2. Touch the [Search] key.
●Playback control (PBC)
This control signal is recorded on a Video CD for
version 2.0 and used to control playback. Using
pre-recorded menu screens in the Video CD with
PBC, you can enjoy playback of software with a
simplified dialog function or software with search
function. You can also enjoy a still picture at high
or standard resolution.
3. Input the track number that you want to play
back with [0] to [9] key.
4. Touch the [ENT] key.
Listening to a CD
Playback starts from the scene of the input
track number.
• If the input track number does not exist or
searching with a track number is not
allowed, the screen image will not change.
* If you are playing a disc with PBC and the PBC
function is engaged, this operation may not be
performed.
This unit is a CD TEXT compatible model, and
supports the display of the DISC TITLE, TRACK
TITLE and ARTIST of the CD TEXT.
After disc loading, the play mode is automatically
engaged.
• When playback is not started, press the [p]
button or touch the [p] key.
5. Touch the [Back] key.
Note:
• This unit supports only CD TEXT in English. Also,
some character data may not be reproduced
properly on the display.
Changing audio output
You can change the audio output method.
1. Touch the screen to display the VIDEO CD
mode screen.
2. Touch the [Audio] key during playback.
Each time you touch the key, the audio output
method is switched as follows:
Pausing playback
1. Press the [p] button or touch the [p]
key during playback.
Playback pauses.
2. To resume playback, press the [p] button
or touch the [p] key.
L (Left) R (Right) STEREO
Playback resumes.
Displaying the playback status
1. Touch the screen to display the VIDEO CD
mode screen.
2. Touch the [P.Time] key during playback.
The screen will automatically return to the
playback screen in about 7 seconds, and the
playback status will be displayed on the
playback screen.
On/Off of Playback Control
On Video CDs equipped with Play Back Control
function, you can turn it on/off.
* The factory default setting is “ON”.
1. Touch the screen to display the VIDEO CD
mode screen.
2. Each time you touch the [PBC] key, you can
switch between on and off.
When the PBC is turned on or off, the disc
plays from the beginning.
41
Download from Www.Somanuals.com. All Manuals Search And Download.VRX765VD
DVD Video Player Operations
Skipping a track (searching)
1. Press the [R] or [F] button during
playback.
Other various play functions
1. Touch the [Option] key.
Tracks are skipped, as many as the times the
button is pressed, and playback starts.
• Pressing the [F] button starts playback
from the beginning of the next track.
• Pressing the [R] button starts playback
from the beginning of the current track.
When this button is pressed again within
about 2 seconds, playback starts from the
beginning of the previous track.
2. Touch the touch key of the function you want
to play.
TOP function
The TOP function resets the DVD player to the
first track of the disc.
[Track Scan] : track scan playback
This operation scans and plays back all tracks
recorded on the disc, the first 10 seconds for
each.
1. Press the [BAND] button to playback the first
track (track No. 1).
* “T.SCN” is displayed on the screen.
[Track Repeat] : track repeat playback
This operation plays back tracks recorded on
the CD repeatedly.
Fast forward and fast backward
1. Press and hold the [R] or [F] button
during playback.
* “T.RPT” is displayed on the screen.
The playback speed becomes 5-time faster
first and then 20-time faster 3 seconds later.
Releasing the button resumes to the normal
speed playback.
[Track Random] : track random playback
This operation plays back all tracks on the
disc in no particular order.
* “T.RDM” is displayed on the screen.
Searching with a track number
This operation allows searching using the track
numbers recorded on the CDs.
3. To cancel the play, touch the key of the
function to cancel.
4. Touch the [Back] key to return to the previous
screen.
1. Touch the [Search] key.
2. Input the track number that you want to play
back with [0] to [9] key.
3. Touch the [ENT] key.
Playback starts from the track of the input
track number.
• If the input track number does not exist or
searching with a track number is not
allowed, the screen image will not change.
4. Touch the [Back] key.
Selecting a track on the Track List
screen
This function allows you to select tracks from a
displayed list.
1. Touch the [List] key.
The Track List screen is displayed.
2. When the desired track is not displayed, touch
the [v] or [V] key to scroll the track list.
3. Touch the desired track title key.
The corresponding track is started playback.
4. Press the [Back] key to return to the previous
screen.
42
VRX765VDDownload from Www.Somanuals.com. All Manuals Search And Download.
DVD Video Player Operations
Displaying CD titles
Precautions when creating an MP3
disc
This unit can display title data for CD-text CDs.
1. Touch the [Title] key.
●File extensions
2. Touch the [X] key of the Disc, Artist, or Track
item to cause the respective display to scroll
once.
1. Always add a file extension “.MP3” or “.mp3”
to an MP3 file, and “.WMA” or “.wma” to a
WMA file by using single byte letters. If you
add a file extension other than specified or
forget to add these file extension, the file
cannot be played. In addition, if you use upper
case and lower case letters (capital and small
letters) mixedly for file extensions, normal
play may not be possible.
Listening to an MP3/WMA
This unit is an ID3 Tag compatible model.
This unit supports the title, artist and album
display of the ID3 Tag versions 1 and 1.1.
After disc loading, the play mode is automatically
engaged.
2. Files other than MP3/WMA data cannot be
played.
●Logical format (File system)
What is MP3/WMA?
1. When writing an MP3/WMA file on a disc,
please select “ISO9660 level 1 or level 2
(without including expansion format)” as
the writing software format. Normal playback
may not be possible if the disc is recorded on
another format.
2. The folder name and filename can be
displayed as the title during MP3/WMA play
but the title must be within 31 single byte
alphabetical letters and numerals for the
folder name and file name (including an
extension). Entering more letters or numerals
than specified may cause an incorrect
display.
MP3 is an audio compression method and
classified into audio layer 3 of MPEG standards.
WMA is an audio compression method
developed by Microsoft Corporation.
These audio compression methods have
penetrated into PC users and become a standard
format.
These features compress the original audio data
to about 10 percent of its initial size with a high
sound quality. This means that about 10 music
CDs can be recorded on a CD-R disc or CD-RW
disc to allow a long listening time without having
to change CDs.
Note:
●Folder structure
• Some CDs recorded on CD-R/RW mode may not
be usable.
1. A disc with a folder having more than 8
hierarchical levels will conflict with the
ISO9660 and playback will be impossible.
Displaying MP3/WMA ID3-TAG titles
ID3 information such as title, artist and album title
can be displayed for an MP3/WMA file containing
ID3 Tag information.
●Number of files or folders
1. The maximum allowable number of folders is
255 (including root directory); the maximum
allowable number of files is 512 (max. 255 per
folder). This represents the maximum number
of tracks that can be played back.
2. Tracks are played in the order that they were
recorded onto a disc. (Tracks might not
always be played in the order displayed on the
PC.)
• Some noise may occur depending on the
type of encoder software used while
recording.
43
Download from Www.Somanuals.com. All Manuals Search And Download.VRX765VD
DVD Video Player Operations
• In case of a track recorded at VBR (variable
bit rate), the display for the play time of the
track may be slightly different from the
actual play time. Also, the recommended
value of VBR ranges from 64 kbps to 320
kbps.
• Depending on the damage conditions of a
file, it may occur that the file is not played
and the next file is played instead. Also, if
the damage is in a severe condition, play
stops showing the “ERROR 3” display.
• After disc selection, the play mode is
automatically engaged.
Pausing playback
1. Press the [p] button or touch the [p]
key during playback.
Playback pauses.
2. To resume playback, press the [p] button
or touch the [p] key again.
Playback resumes.
Skipping a track (searching)
1. Press the [R] or [F] button during
playback.
Tracks are skipped, as many as the times the
button is pressed, and playback starts.
• Press the [F] button starts playback from
the beginning of the next track.
• Press the [R] button starts playback from
the beginning of the current track. When this
button is pressed again within about 2
seconds, playback starts from the
Note:
• If ID3 Tag information was entered with 2-byte
characters, it may occur that the characters are not
reproduced properly on the display.
• MP3/WMA files that the DRM (Digital Rights
Management) function is set cannot be played.
beginning of the previous track.
* This operation skips the track over the folder.
Regarding MP3/WMA folder creation
Up to 8 folder levels (including the root directory)
can be created for MP3/WMA files (items 1 – in
the illustration). However, on this unit, folders
created above the third level will be converted to
2 levels.
Fast forward and fast backward
1. Press and hold the [R] or [F] button
during playback.
The playback speed becomes 5-time faster
first and then 20-time faster 3 seconds later.
Releasing the button resumes to the normal
speed playback.
1
2
3
1
4
2
Skipping the current folder
1. Press the [BAND] button during playback.
The tracks of the current folder are skipped
and playback starts from the first track of the
next folder.
3
4
• Folders containing no MP3/WMA files are not
recognized.
• Only folders containing tracks (1 to 4 in
illustration) are given numbers and displayed
on the list.
44
VRX765VDDownload from Www.Somanuals.com. All Manuals Search And Download.
DVD Video Player Operations
Selecting a folder/track on the LIST
screen
Other various play functions
1. Touch the [Option] key.
1. Touch the [List] key during playback.
Folder List screen is displayed.
2. When the desired folder is not displayed,
touch the [v] or [V] key to scroll the list.
3. Touch the desired folder name key.
The Track List screen appears.
4. Touch the [v] or [V] key to scroll the list, and
touch the desired track name key.
The corresponding track is started playback.
• Touch the [X] or [x] key to display the
Track List of the previous or next folder.
• Touch the [Back] key to return to the Folder
List screen.
2. Touch the touch key of the function you want
to play.
[Track Scan] : track scan playback
This operation scans and plays back all tracks
recorded on the disc, the first 10 seconds for
each.
5. Touch the [Back] key.
* “T.SCN” is displayed on the screen.
Playback by selecting a folder and
track (Direct select mode)
This operation allows searching using the folder
and track numbers recorded on the MP3/WMA
disc.
[Folder Scan] : folder scan playback
This operation plays back the first tracks of all
folder on the MP3/WMA disc, the first 10
seconds for each.
* “F.SCN” is displayed on the screen.
1. Touch the [Search] key.
[Track Repeat] : track repeat playback
This operation plays back the tracks currently
being played back repeatedly.
The Key Pad screen appears with the track
number input mode.
Touching the [Folder] key turns the Key Pad
to the folder number input mode.
* “T.RPT” is displayed on the screen.
2. Input the number for the track or folder that
you want to play back with [0] to [9] key.
3. Touch the [ENT] key.
When you select the folder number, playback
starts from track 1 of the input folder number.
4. Touch the [Back] key.
[Folder Repeat] : folder repeat playback
This operation plays back tracks in an MP3/
WMA folder repeatedly.
* “F.RPT” is displayed on the screen.
[Track Random] : track random playback
This operation plays the tracks in the folder in
a random order.
* “T.RDM” is displayed on the screen.
[Folder Random] : folder random playback
This operation plays back tracks recorded on
the disc in no particular order.
* “F.RDM” is displayed on the screen.
3. To cancel the play, touch the key of the
function to cancel.
4. Touch the [Back] key to return to the previous
screen.
Displaying CD titles
1. Touch the [Title] key.
2. Touch the [X] key of the Folder, Track,
Album, Artist or Title item to cause the
respective display to scroll once.
45
Download from Www.Somanuals.com. All Manuals Search And Download.VRX765VD
Other Functions
Entering titles
Title list play
You can display a list of titles, then select the CD
track, disc or broadcast station to listen to from
that list.
* You cannot display a title list with the unit in Seek,
Preset Scan, Auto store (Tuner or TV) mode.
Cancel those operation modes before displaying a
title list.
Titles up to 10 characters long can be stored in
memory and displayed for Radio stations, CD,
TV stations, and CDs in the CD changer. The
numbers of titles that can be entered for each
mode are as follows.
Mode
Number of titles
30 titles
TUNER mode
CD mode
TV mode
1. Touch the screen (TV mode only).
2. Touch the [List] key to display the LIST
screen.
50 titles
15 titles
The following titles can be changed in a title
list screen.
TUNER :
CD changer mode
Number of titles
A title of a station stored for the presets 1 to 6
or frequency is displayed.
CD-changer :
CDC655Tz connected 100 titles
DCZ625 connected 100 titles
DISC titles for discs 1 to 6 are displayed.
When there is not any disc in the changer,
“NO DISC” is displayed.
* You cannot enter titles with the unit in Seek,
Preset Scan, Auto store (TUNER or TV) mode.
Cancel each of those operations before entering
titles.
TV/Satellite Radio :
A title of a channel stored for the presets 1 to
6 or a channel number is displayed.
3. Touch the desired title key (1 to 6) to select.
The selected broadcast station or disc is
played.
1. Press the [SRC] button to select the mode you
want to enter a title (TUNER, CD, CD changer
or TV).
2. Select and play a CD in the CD changer or a
CD track or tune in to a Radio station or a TV
station for which you want to enter the title.
4. Touch the [Back] key to return to the previous
screen.
3. Touch the screen (TV mode only).
4. Touch the [List] key to display the LIST
screen.
To enter a CD title, touch the [Title] key.
5. Touch the [Edit] key.
The title input mode display appears.
6. Touch keys of the characters, symbols, etc.
shown in the display to input titles.
“
”
: Centering
“Back Space” : Backspace
“
”
: Space
: Memory
: Scroll
“Memo”
“C”
Note:
• Up to 10 characters can be input.
• To switch the character types, touch the scroll key
(C) at the left of the screen.
7. Repeat the step 6 to enter the complete title.
8. Touch and hold the [Memo] key for more than
2 seconds to store the title into memory. The
display returns to the original mode screen.
46
VRX765VDDownload from Www.Somanuals.com. All Manuals Search And Download.
Other Functions
Changing over monitor display size
Internal amplifier cancel function
This function is used to disable the internal
amplifier when an external amplifier is
connected.
* This function is available only when the panel is
open.
Note:
• This function is not available while you are driving.
• Switch to the DVD PLAYER (DVD video or video
CD)/VISUAL/DVD changer/TV mode you see.
1. Touch the screen to display the mode menu,
then touch “Display size” key ([F.WIDE], etc.)
at the top right of the screen.
* The factory default setting is “OFF”.
1. Press the [ADJ] button.
2. Touch the [AUDIO EXT.] key.
3. Touch the [ON] or [OFF] of the AMP CANCEL
item to turn the internal amplifier on or off.
4. Touch the [Back] key to return to the previous
The screen changes to the SCREEN MODE
menu.
screen.
2. Touch the [F.WIDE], [WIDE], [CINEMA], or
[NORMAL] key to select the desired monitor
display size.
Triggered audio mute for cellular
telephones
This unit requires special wiring to mute the audio
signal automatically when a cellular telephone
rings in the car.
This function is not compatible with all cellular
telephones. Contact your local authorized
Clarion dealer for information on proper
installation and compatibility.
“F. WIDE” : (full wide mode)
The whole image elongates horizontally.
“WIDE” : (wide mode)
The image at right and left ends in a display
elongates horizontally.
“CINEMA” : (cinema mode)
The image at both top and bottom in a display
disappears.
“NORMAL” : (normal display)
There is a black area at both right and left
ends of a display. In case of normal TV
broadcasting (4:3), the image can be shown
without being cut or deformed.
Note:
• When a 4:3 scale image (non-wide screen image)
is displayed, part of the image may be out of view
or the image may be distorted when in wide mode
or full-wide mode. Please use normal mode for
viewing such images with the proper aspect ratio.
• During superimposed display, it becomes a full-
wide mode.
47
Download from Www.Somanuals.com. All Manuals Search And Download.VRX765VD
11.OPERATIONS OF ACCESSORIES
iPod Operations
This unit can be used to control a connected
Apple iPod (third generation version 2.2 or
Controlling the iPod
●Selecting the iPod mode
higher, iPod Mini, fourth generation, iPod nano,
1. Connect the iPod to the connector.
iPod with video).
2. Press the [iPod] button.
Note:
The iPod mode can also be selected by
touching the [iPod] key on the Source menu.
• Note that iPod versions higher than those noted
above may not be playable.
• The unit will not operate, or may operate
improperly with unsupported versions.
• First and second generation iPod and iPod shuffle
cannot be used.
[MENU] key
[Shuffle] key
List keys
Notes regarding use of Apple iPod
• When using an iPod, after connecting the iPod
to the connector, select the iPod mode by
pressing the [iPod] button, or touching the
[iPod] key on the Source menu.
• After the iPod has been connected to this unit,
the iPod’s buttons are disabled for operation.
• When the iPod mode has been selected, a
special iPod control screen is displayed
different from the main screens for other
modes.
Operation display
• When the iPod mode has been selected, the
screen image input from the VISUAL terminal
is output to the rear monitor.
[p] key
[R] , [F] key
• The remote control unit cannot be used to
perform scan, repeat or random play.
• This unit can display the Podcast titles*, Artist
names, Album titles, Song titles, Genre names,
Playlist titles, Composer names and Audio
Book titles* registered on the iPod. When no
data is present, the title display will remain
blank.
●iPod menu screen operation keys
[MENU] key
• Displays the Option menu screen.
List keys
• Displays the corresponding list screen.
[Podcasts], [Artists], [Albums], [Genres]
and [Playlists] are available from the iPod
menu screen. [Audio Books],
[Composers] and [Songs] are only
available from the Option menu screen.
[Shuffle] key
* Whether these functions are available or not
depends on the iPod version.
• The iPod is used with the equalizer function
turned OFF.
• Use to switch the shuffle mode, in the order:
➜ Song Shuffle ➜Album Shuffle ➜ Shuffle
OFF.
The default value is Shuffle OFF.
When enabled, this function performs
playback of tracks in random order,
regardless of the order in which they are
recorded.
●Precautions regarding battery
consumption:
When the iPod’s internal battery becomes
depleted, the recharge warning indicator
will appear in the iPod’s display. In this
condition, the iPod cannot be played even if
attached to the VRX765VD. Also, the
VRX765VD’s recharging function cannot be
used to recharge the iPod.
As a result, when the iPod’s battery
becomes depleted, use the dedicated
charger provided with it to recharge the
battery.
[p] key
• Use to control playback and pause.
[R], [F] keys
• Use to perform track selection. Touch and
hold to enable fast-forward or fast-
backward.
48
VRX765VDDownload from Www.Somanuals.com. All Manuals Search And Download.
iPod Operations
Note:
Play mode menu
• The title display (*) shows, from top level down, the
SONG title, ARTIST name, and ALBUM title. Press
the operation display to scroll the SONG title.
• Uses to switch the shuffle mode and repeat
mode.
List keys
●Operation display
• Displays the corresponding list screen.
[Podcasts], [Artists], [Albums], [Genres],
[Playlists], [Audio Books], [Composers]
and [Songs] are available.
[Back] key
Play/Pause icon(p) display
Track No.
• Uses to return to the iPod menu screen.
Audio Books menu
Clock time
• Uses to change the playback speed during
playing Audio Books.
Play mode (*1)
[Pod Color] key
Song title/
Artist name/
• Changes the background color of the iPod
menu screen.
Album title (*2)
[Pod Color]: changed to the color of the
Progress/
Volume indicator
connected iPod.
[Normal Color]: changed to light blue.
Play time
Remaining time
Pausing playback
1. Press the [p] button or touch the [p]
Note:
key during playback.
Playback pauses.
2. To resume playback, press the [p] button
or touch the [p] key again.
Playback resumes.
*1 Displays status of Repeat, Shuffle play.
1
A
S
A
: 1-track Repeat
: All Repeat
: Song Shuffle
: Album Shuffle
Skipping a track (searching)
1. Press the [R] or [F] button during
*2 When a Podcast or Audio Book which has
two or more chapters is played back, the
chapter title and chapter number are
displayed.
playback.
Tracks are skipped, as many as the times the
button is pressed, and playback starts.
• Pressing the [F] button starts playback
from the beginning of the next track.
• Pressing the [R] button starts playback
from the beginning of the current track.
When this button is pressed again within
about 2 seconds, playback starts from the
beginning of the previous track.
●Option menu screen operation keys
List keys [Back] key
Play mode menu
* When a Podcast or Audio Book which has two
or more chapters is played back, pressing the
[R] or [F] button during pausing moves
the current location to the beginning of the
previous or next chapter.
[Pod Color] key
List keys
Audio Books menu
49
Download from Www.Somanuals.com. All Manuals Search And Download.VRX765VD
iPod Operations
Fast forward and fast backward
1. Press and hold the [R] or [F] button
during playback.
Viewing video data in the iPod (only
for the iPod with video features)
When you connect an iPod with video features by
using the optional connector cable for iPod with
video (released soon), you can enjoy the video
data and slideshow data stored in the iPod
showing them on the liquid crystal panel of this
unit (and the rear monitor if connected).
The playback speed becomes 5-time faster
first and then 20-time faster 3 seconds later.
Releasing the button resumes to the normal
speed playback.
TOP function
The TOP function resets the player to the first
track of the tracks to play.
Note:
• Do not connect the iPod to this unit when a Video
Playlists item is selected on the iPod.
1. Press the [BAND] button to playback the first
1. Touch and hold the [MENU] key on the iPod
menu screen for more than 1 second. The
screen will be changed to a black screen.
In this condition, the iPod cannot be controlled
from this unit. The iPod is turned into the
normal operation mode, and you can control
the iPod using the original controls of the iPod
(iPod operation mode).
track of the current list.
* To playback all of the tracks in the Songs list
from the first track, keep pressing the [BAND]
button more than 1 second.
Selecting a list item from a list screen
1. Touch the desired List key from the iPod
menu screen or the Option menu screen to
display the corresponding list screen.
2. Touch a desired list item on the screen to
display the corresponding list of tracks.
• Use the [v] and [V] keys to scroll the list.
2. Play back your desired video data or
slideshow data from the iPod.
The specified image data will be displayed on
the liquid crystal panel (and the rear monitor if
connected).
* Skip this operation for the Podcasts, Audio
3. To return to the iPod menu screen, touch the
screen.
* When you touch the screen during playing back
image data, the playback is terminated and the
first track of the first playlist will be played back.
Books and Songs list.
3. Touch the desired track name on the list to
playback.
• Use the [v] and [V] keys to scroll the list.
Note:
• Image data may not be played back according to
the status of the iPod.
• If you turn off the power of this unit or change the
operation mode during the iPod operation mode,
the iPod will be turned off. When it resumes to the
iPod mode, the iPod will be turned on and resumed
to the last playback mode.
50
VRX765VDDownload from Www.Somanuals.com. All Manuals Search And Download.
VISUAL Operations
This function is available when a VTR, etc. is connected to the visual terminal.
Changing the audio input level
The visual terminal can be used to change the
input audio level.
* The factory default setting is “HIGH”.
1. Touch the screen to display the menu, then
WARNING
For your safety, the driver should not watch
the VTR, etc. or operate the controls while
driving. Please note that watching and
operating the VTR, etc. while driving are
prohibited by law in some countries.
repeat touching the [SENS] key to select the
level.
HIGH: 16.25 dB
MID: 3.75 dB
LOW: 0 dB
Switching to the VISUAL mode
Note:
• For your safety, the VRX765VD has a safety
function which turns off the picture when the car is
moving, so only the audio can be heard. The
picture can only be watched when the car is
stopped and the parking brake is applied.
1. Press the [SRC] button, and touch the
[VISUAL] key.
CD Changer Operations
Note:
Displaying the CD TEXT titles
This operation is only possible when this unit is
connected with a CD TEXT compatible CD
changer.
• When an optional CD (DVD) changer is connected
through the CeNET cable, this unit controls all CD
(DVD) changer functions. This unit can control up
to 2 changers (CD and/or DVD).
1. Touch the [Title] key.
2. Touch the [X] key of the Disc, Artist, or Track
item to cause the respective display to scroll
once.
CD changer functions
Press the [SRC] button and touch the [CD
CHANGER] key to change to the CD changer
mode. Playback automatically starts.
* If 2 CD changers are connected, the [CD
CHANGER 1] and [CD CHANGER 2] keys will
display in the Source menu.
Selecting a CD and track from the
list
1. Touch the [List] key.
* If “NO MAGAZINE” appears in the display, insert
the magazine into the CD changer. “DISC
CHECKING” appears in the display while the
player loads (checks) the magazine.
* If “NO DISC” appears in the display, eject the
magazine and insert discs into each slot. Then,
reinsert the magazine back into the CD changer.
2. Touch the corresponding Disc key (1 to 6) to
select the desired disc.
The Track List screen appears.
* When the touching and holding a Disc key for
more than 1 second, the title will scroll.
3. When the desired track is not displayed, touch
the [v] or [V] key to scroll the track list.
4. Touch the desired Track key.
Pausing play
1. Press the [p] button or touch the [p]
key during playback.
Playback pauses and “PAUSE” appears in
the screen.
2. To resume playback, press the [p] button
or touch the [p] key.
The corresponding track is started playback.
* When the touching and holding a Track key for
more than 1 second, the title will scroll.
5. Touch the [Back] key to return to the Disc List
screen.
Touch the [Back] key again to return to the
CD CHANGER mode screen.
Playback resumes.
51
Download from Www.Somanuals.com. All Manuals Search And Download.VRX765VD
CD Changer Operations
Switching to a next disc. (Disc Up
function)
Other various play functions
1. Touch the [Option] key.
The disc up function plays from the first track
(track No.1) of the next disc.
1. Press the [BAND] button.
The disc changes to the next disc.
Searching with a track number
* This function is available only for the current disc.
1. Touch the [Search] key.
2. Input the track number that you want to play
back with [0] to [9] key.
3. Touch the [ENT] key.
2. Touch the touch key of the function you want
to play.
[Track Scan] : (track scan playback)
This scan play locates and plays the first 10
seconds of each track on a disc automatically.
[Disc Scan] : (disc scan playback)
This scan play locates and plays the first 10
seconds of the first track on each disc in the
currently selected CD changer.
Playback starts from the track of the input
track number.
• If the input track number does not exist or
searching with a track number is not
allowed, the screen image will not change.
4. Touch the [Back] key.
[Track Repeat] : (track repeat playback)
The repeat play continuously plays the
current track.
Skipping a track (searching)
* This function is available only for the current disc.
[Disc Repeat] : (disc repeat playback)
After all tracks in the current disc have been
played, the disc repeat play automatically
replays the current disc over from the first
track.
[Track Random] : (track random playback)
The random play selects and plays individual
tracks on the disc in no particular order.
[Disc Random] : (disc random playback)
The disc random play selects and plays
individual tracks or discs automatically in no
particular order.
1. Press the [R] or [F] button during
playback.
Tracks are skipped, as many as the times the
button is pressed, and playback starts.
• Pressing the [F] button starts playback
from the beginning of the next track.
• Pressing the [R] button starts playback
from the beginning of the current track.
When this button is pressed again within
about 2 seconds, playback starts from the
beginning of the previous track.
3. To cancel the play, touch the key of the
function to cancel.
Fast forward and fast backward
1. Press and hold the [R] or [F] button
during playback.
4. Touch the [Back] key to return to the previous
screen.
The playback speed becomes 5-time faster
first and then 20-time faster 3 seconds later.
Releasing the button resumes to the normal
speed playback.
52
VRX765VDDownload from Www.Somanuals.com. All Manuals Search And Download.
DVD Changer Operations
Only basic operations of DVD changer can be
performed from the unit. Use the remote control
unit to perform the following functions.
• Scan, Repeat, Random functions
• Video CD Playback function ON/OFF
• DVD Setup function, Audio, Subtitle, Angle
setting function
For details on operations other than those
described below, see the pages of “DVD Video
Player Operations”.
Selecting a disc from the list
1. Touch the [List] key.
2. Touch the corresponding Disc key (1 to 6) to
select the desired disc.
The disc changes to the specified disc.
Switching to a next disc (Disc Up
function)
1. The disc up function plays from the first track
(track No.1) of the next disc.
For details on DVD changer precautions, refer to
the supplied owner’s manual.
Press the [BAND] button.
Each time you press the [BAND] button, the
disc changes to the next disc.
Note:
• When the DVD changer (VCZ625) is connected via
optical cable, no sound will be output if AUDIO
OUT is switched to ANALOG on the changer’s
“GENERAL SETUP” menu.
TV Operations
TV functions
Watching a video
To watch TV, requires a TV tuner. When an
optional TV tuner is connected through the
CeNET cable, this unit controls all TV tuner
functions.
The TV tuner has a VTR input terminal to which
1 external device can be connected. Connect a
12V video cassette player (VCP) or video
cassette recorder (VCR) to the TV tuner input
terminal.
WARNING
1. Touch the screen to display the TV/VTR mode
menu, then touch the [Option] key.
2. Touch the [VTR] key to change to the VTR
mode.
For your safety, the driver should not watch
the TV or operate the controls while driving.
Please note that watching and operating
the TV while driving are prohibited by law in
some countries.
• To return to the TV broadcast, perform the
same operation again.
Seek tuning
1. Press the [BAND] button or touch the [Band]
key to select the desired TV band (TV1 or
TV2).
Watching TV
Note:
• For your safety, the VRX765VD has a safety
function which turns off the picture when the car is
moving, so only the audio can be heard. The
picture can only be watched when the car is
stopped and the parking brake is applied.
• If “AUDIO ONLY” appears on the screen just after
turning on the ACC power of the car, release the
parking brake while confirming safety, and then
engage the parking brake again.
* If “MANU” is displayed in the display, press
and hold the [BAND] button for more than 1
second. “MANU” in the display goes off.
2. Touch the [X] or [x] key to automatically
seek a station.
• Touching the [x] key to tune up the channel
to the next available TV station, and the [X]
key to tune down.
1. Press the [SRC] button, and touch the [TV/
VTR] key.
2. Press the [BAND] button or touch the [Band]
key to select the desired TV band (TV1 or
TV2).
Every pressing the button toggles the TV
band between TV1 and TV2.
3. Press the [R] or [F] button to tune in the
previous or next preset TV station.
53
Download from Www.Somanuals.com. All Manuals Search And Download.VRX765VD
TV Operations
Selecting with a channel number
1. Touch the screen to display the TV/VTR
Recalling a preset station
A total of 12 TV stations can be stored (6-TV1
mode menu, then touch the [Search] key.
and 6-TV2).
There are 2 ways available to recall the preset
station.
2. Enter the channel number corresponding with
the station you desired by touching the [0] to
[9] key.
●Using the [R] or [F] button
• If you touch the wrong number ([0] to [9]
key), you can delete it to touch the [CLR]
key.
1. Press the [BAND] button or touch the [Band]
key to select the desired TV band. (TV1 or
TV2)
2. Press the [R] or [F] button to recall a
stored TV station.
●Using the Preset List screen
3. Touch [ENT] key. The TV station you required
would be tuned.
4. Touch the [Back] key.
1. Touch the screen to display the menu, then
Manual tuning
touch the [List] key.
There are 2 ways available: Quick tuning and
step tuning. When you are in the step tuning
mode, the channel changes one step at a time. In
quick tuning mode, you can quickly tune the
desired frequency.
2. Touch the corresponding Preset key to recall
the stored station.
* You can select the desired band by touching
the [Band] key.
* Touching and holding the desired Preset key
for more than 2 seconds will store the current
station into the preset memory.
1. Press the [BAND] button or touch the [Band]
key to select the desired band. (TV1 or TV2)
* If “MANU” is not displayed in the display, keep
pressing the [BAND] button more than 1
second. “MANU” appears and manual tuning is
now available.
3. Touch the [List] key again to return to the
previous screen.
Manual memory
2. Tune into a station.
1. Touch the [Band] key to select the desired TV
Quick tuning:
band. (TV1 or TV2)
2. Tune in the desired TV station to be stored.
3. Touch the [List] key.
4. Touch and hold one of the Preset key for more
than 2 seconds to store the current station into
the preset memory.
Touch and hold the [X] or [x] key for more
than 1 second to tune in a station.
Step tuning:
Touch the [X] or [x] key to manually tune in
a station.
Note:
• Manual tuning is cancelled if you do not operate
the unit for 7 seconds (Only when connecting the
TTX7503Z or TTX7504Z with this unit).
Auto store
Auto store selects 6 TV stations automatically
and stores each one into a preset memory. If 6
stations cannot be received with good reception,
previously stored station remain and only the
strong stations are stored into memory.
1. Touch the [Band] key to select the desired TV
band. (TV1 or TV2)
2. Touch the [List] key.
3. Touch and hold the [AS] key for more than 2
seconds.
A beep sounds and the stations with good
reception are stored automatically to the
preset channels.
54
VRX765VDDownload from Www.Somanuals.com. All Manuals Search And Download.
TV Operations
Preset scan
Preset scan shows each preset channel before it
automatically advances to the next preset. This
function is useful for searching for desired TV
station in memory.
1. Touch the screen to display the TV/VTR
menu, then touch [List] key.
2. Touch the [PS] key to start preset scan. The
unit starts scanning each station for 7
seconds sequentially.
3. When the desired channel is received, touch
the [PS] key again.
Setting the TV diver
You can change the reception setting for the TV
antenna connected to the TV tuner.
* This function is enabled only when the panel is
open.
* Normally use the TV diver with the “ON” position.
1. Touch the screen to display the TV/VTR
menu, then touch [Option] key.
2. Touch the [ON] or [OFF] key of the TV DIVER
item to turn this function on and off.
[ON] :
Sets reception emphasizing the visual.
[OFF] :
Sets the diver setting to OFF.
3. Touch the [Back] key to return to the previous
mode.
55
Download from Www.Somanuals.com. All Manuals Search And Download.VRX765VD
Satellite Radio Operations
This function is available when a Satellite Radio
Receiver is connected through the CeNET cable.
This unit can control the following satellite radio
receivers:
• XM Satellite Radio Receiver: XMD1000
• XM Smart Digital Adapter: XM SDA
• SIRIUS Satellite Radio Receiver: SIRCL2,
SIRCL3
Confirming your Radio ID
●XM
1. Touch the [Search] key to display the Key
Pad screen.
2. Touch the [0] key, then touch the [ENT] key.
Your Radio ID (8-digits number) will be
displayed.
3. To return to the previous screen, touch the
[Back] key.
●SIRIUS
Note:
• When the function is differ depending to the
connected receiver, they are distinguished by the
following notations:
“XM”: for an XM Satellite Radio Receiver
“SIRIUS”: for a SIRIUS Satellite Radio Receiver
1. Touch the [Option] key to display the Option
screen.
Your SIRIUS ID (12-digits number) will be
displayed.
Selecting a Satellite Radio mode
1. Press the [SRC] button, and touch the
[SIRIUS] or [XM] key.
2. To return to the previous screen, touch the
[Back] key.
The system changes to the specified Satellite
Radio mode.
Displaying channel labels
1. Touch the [Title] key.
Category, CH.Name, Title, Artist and R-Text
are displayed.
2. Touch the [X] key of desired item.
The label of specified item will scroll once.
Displaying radio text
* Radio text is only displayed for stations that
transmit such information.
Received radio text is displayed in the Main
menu and the Title screen labeled as “R-Text”.
You can scroll the radio text in the Title screen.
1. Touch the [Title] key.
2. Touch the [X] key of the “R-Text” item.
Selecting a band
1. Press the [BAND] button or touch the [Band]
key to select a band.
This changes the reception band as follows:
• XM: XM1 ➜ XM2 ➜ XM3 ➜ XM1 ...
• SIRIUS: SR1 ➜ SR2 ➜ SR3 ➜ SR1 ...
The received radio text will scroll once.
●Information displayed during reception
Channel selection
The following information is displayed when the
satellite radio cannot be received normally.
• When the receiver is turned on the first time or
after a reset: “UPDATING”
• When a channel is being tuned in (no signal is
yet received):
XM; “LOADING”, SIRIUS; “ACQUIRING”
• A channel without a broadcast has been
selected:
Channels are selected with the [R] or [F]
button.
* For details, see the following operation
descriptions.
Note:
• The audio output is muted and other button
operations are not accepted during channel
selection.
XM; “– – – CH”, SIRIUS; “INVALID CHANNEL”
• A channel not covered by your contract:
XM; “UPDATING”, SIRIUS; “CALL 888” ↔
“539 SIRI” (alternated)
• When your contract is expired: “SUB UPDATE”
56
VRX765VDDownload from Www.Somanuals.com. All Manuals Search And Download.
Satellite Radio Operations
Selecting a station with the channel
number
Recalling a preset station
A total of 18 satellite radio stations can be stored
(6-XM1, 6-XM2 and 6-XM3 for XM; or 6-SR1, 6-
SR2 and 6-SR3 for SIRIUS). This allows you to
store your favorite satellite radio stations in
memory for later recall.
1. Touch the [Search] key.
2. Enter the channel number of your desired
station by touching the [0] to [9] keys.
If you enter a wrong number, you can cancel
it by touching the [CLR] key.
1. Touch the [List] key.
2. Press the [BAND] button or touch the [Band]
3. Touch the [ENT] key.
key to select the desired band.
The radio channel you entered will be tuned.
3. Touch the corresponding Preset key (1 to 6)
to recall the desired preset station.
4. Touch the [Back] key.
* Touching and holding the desired Preset key
for more than 2 seconds stores the current
station into preset memory.
Tuning mode (T-MODE)
There are two channel selection modes: seek
mode and manual mode.
4. Touch the [Back] key to return to the previous
●Seek tuning
screen.
Only channels that can be received are selected.
Channels without broadcasts and channels not
covered by the contract will be skipped.
Receiving stations selected by
category
Satellite Radio allows you to select broadcast
channel category (contents).
1. Touch the [X] or [x] key.
The receiver seeks the next available channel
below or above the current channel.
1. Touch the [CAT] key.
●Selecting from preset categories
2. Touch and hold the [X] or [x] key.
The receiver continues to seek channels
below or above the current channel while
touching the key. When the key is released,
the receiver receives the next available
channel.
1-1. Touch the [List] key to display the Preset
Category screen.
1-2. Select a category by touching a Category
Preset key (1 to 6) that the desired category
is stored.
●Manual tuning
Any channel including channels without
broadcasts or channels not covered by the
contract can be selected during manual tuning.
1. Keep pressing the [BAND] button or the
[Band] key more than 1 second.
●Selecting by displaying all categories
1-1. Touch the [v] or [V] key to scroll the
category list.
The seek mode is changed to the manual
tuning mode, and the “MANU” indicator is
displayed on the screen.
1-2. Touch the desired Category item key to
select the category.
2. Touch the [X] or [x] key to tune in a station.
This starts seek tuning and channels that
meet the specified category are selected.
Note:
• The receiver automatically reverts to the seek
tuning mode when the [X] or [x] key is not used
for 7 seconds in the manual tuning mode.
Note:
• When the category selection mode is entered, the
category of the last received channel is displayed
first.
• The category selection mode is canceled when no
channel with the selected category can be found.
• The [X] and [x] keys are not touched within 7
seconds, the category selection mode is canceled,
and resumes to the normal seek mode.
2. Touch the [X] or [x] key.
The receiver moves to channels above or
below the current channel one by one.
3. Touch and hold the [X] or [x] key for more
than 1 second.
The receiver continues to seek channels
below or above the current channel while
touching the key. When the key is released,
the receiver receives the channel received at
that time.
57
Download from Www.Somanuals.com. All Manuals Search And Download.VRX765VD
Satellite Radio Operations
Presetting a category
A category can be preset by registering specific
categories in Category Preset keys 1 to 6. Then
the desired category can be recalled by pressing
the corresponding Category Preset keys.
1. Touch the [CAT] key.
2. Touch the [v] or [V] key to scroll the category
list.
3. Touch the Category item key you wish to
store in memory.
4. Touch the [List] key to display the Preset
Category screen.
5. Touch and hold the desired Category Preset
key for more than 2 seconds to store the
currently selected category to that Category
Preset key.
Note:
• When the name of a channel stored in memory is
changed by a broadcast station, the display may
show a channel name that differs from the stored
name.
• A channel stored in memory may be discontinued
at the option of the broadcast station.
Scan function
There are two scan modes: the category scan
mode and the preset scan mode.
During scanning channels are displayed in
abbreviated form, the display mode cannot be
switched.
●Category scanning
In a category scan, broadcast channels in the
same category as the current channel are
selected about every 10 seconds.
1. Touch the [List] key.
2. Touch the [PS] key.
• The category scanning can also be
performed by touching the [CS] key in the
Preset Category screen.
Note:
• Category scanning is not available when no
category is defined for the current channel.
●Preset scan
A preset scan scans the channels (up to 18
channels) stored in the preset memory about
every 10 seconds.
1. Touch the [List] key.
2. Touch and hold the [PS] key for more than 1
second.
58
VRX765VDDownload from Www.Somanuals.com. All Manuals Search And Download.
5.1 ch Surround Decoder Operations
This function is available when an optional 5.1 ch
Surround Decoder (DVH940) is connected.
When the 5.1 ch Surround Decoder is connected
through the CeNET cable, the 5.1 ch Surround
Decoder Control unit (DVC940, optional) cannot
be used.
●SPEAKER SEL (speaker selection)
This function determines center speaker,
surround speaker and sub woofer connection.
3-1. Touch the []] key of the SPEAKER SEL item
to show the submenu.
3-2. Touch the [ON] or [OFF] key of the CENTER
SP, SURROUND SP or SUB WOOFER
item to turn speakers on or off, depending
on what speakers are connected.
5.1 ch Surround Decoder control
function
This section describes operation procedures of
setting functions.
For details on each functions, refer to the owner’s
manual supplied with the 5.1 ch Surround
Decoder.
• The factory default setting is “ON”
• The phase of the “SUB WOOFER” is
reversed in the “ON-” setting. The default
value is “ON+”.
●Dolby PL II CONTROL
* Requires an optional amplifier.
* This function is available only when the MUSIC
MODE is selected for Dolby PL II. For setup
details, see “Selecting the Dolby PL II (Dolby
Pro Logic II) type”.
Note:
• The 2-ZONE mode is disabled when the DVH940
is connected.
1. Pressthe[ADJ]buttonto displaytheADJUST
menu.
3-1. Touch the []] key of the Dolby PL II CONT.
item to show the submenu.
3-2. Perform setting for the PANORAMA,
DIMENSION or CENTER WIDTH item.
[PANORAMA]:
Touch the [ON] or [OFF] key to select. “OFF”
is the default value.
[DIMENSION]:
Touch the [[] or []] key to adjust the level
between 0 and 6. The default level is “3”.
2. Touch the [AUDIO EXT.] key.
[CENTER WIDTH]:
Touch the [[] or []] key to adjust the level
between 0 and 7. The default level is “3”.
3. Perform setting for the desired item.
See the following sections for details.
4. Touch the [Back] key to return to the previous
screen.
* In the following sections, only the details
regarding settings are described, procedures
to select setting items are skipped.
59
Download from Www.Somanuals.com. All Manuals Search And Download.VRX765VD
5.1 ch Surround Decoder Operations
●FILTER
●DELAY
This function is used to select filter frequencies
that suit the speakers that are used.
* This function is not available for speakers whose
SPEAKER SEL setting is set to “OFF”.
This function adjusts the timing of the speakers
so that they are synchronized with front speaker
output.
* This function is not available for speakers whose
SPEAKER SEL setting is set to “OFF”.
3-1. Touch the []] key of the FILTER item to
show the submenu.
3-1. Touch the []] key of the DELAY item to show
the submenu.
3-2. Touch the [[] or []] key of the FRONT HPF,
CENTER HPF, SURROUND HPF or SUB
WOOFER LPF item to adjust.
3-2. Touch the [[] or []] key of the CENTER SP
or SURROUND SP item to adjust.
[FRONT HPF]:
[CENTER SP]:
Adjustments are made in the range from 0
ms to 5 ms. The default value is “0 ms”.
This function can be set to the following four
settings: 50 Hz, 80 Hz, 120 Hz or THRGH
(through). “THRGH” is the default value.
[SURROUND SP]:
Adjustments are made in the range from 0
ms to 15 ms. The default value is “0 ms”.
[CENTER HPF]:
This function can be set to the following
three settings: 50 Hz, 80 Hz and 120 Hz.
“120 Hz” is the default value.
●DRC
This function sets the dynamic range
compression.
[SURROUND HPF]:
This function can be set to the following four
settings: 50 Hz, 80 Hz, 120 Hz or THRGH
(through). “THRGH” is the default value.
3-1. Touch the [C] key to display the next menu
screen.
3-2. Touch the [MAX], [STD] or [MIN] key of the
DRC item to select respective item.
* The default value is “MAX”.
[SUB WOOFER LPF]:
This function can be set to the following
three settings: 50 Hz, 80 Hz and 120 Hz.
“120 Hz” is the default value.
●SPEAKER GAIN
This function sets speaker output level.
* This function is not available for speakers whose
SPEAKER SEL setting is set to “OFF”.
3-1. Touch the []] key of the SPEAKER GAIN
item to show the submenu.
3-2. Touch the [[] or []] key of the FRONT L,
CENTER, FRONT R, SURROUND R,
SURROUND L or SUB WOOFER item to
adjust.
Each item is adjustable in the range –10 dB
to +10 dB in 1 dB step increments. The
default value is “0 dB”.
60
VRX765VDDownload from Www.Somanuals.com. All Manuals Search And Download.
5.1 ch Surround Decoder Operations
Setting and storing P.EQ Properties
1. Press the [ADJ] button, and touch the
[AUDIO] key.
DSF mode
DSF effect ON/OFF
* The factory default setting is “OFF”.
1. Press the [ADJ] button, and touch the
[AUDIO] key.
2. Touch the []] key of the P.EQ item to display
the submenu.
3. Touch the key for the desirable type to select.
The P.EQ adjustment contents are as follows:
[SIGNAL]:
This function selects “MUSIC” or “P. NOISE”.
* The factory default setting is “P.NOISE”.
[SPEAKER SELECT]:
This function selects “FRONT”, “CENTER” or
“SURROUND”.
* The factory default setting is “FRONT”.
* This setting is disabled when both the
CENTER SP and SURROUND SP items of the
SPEAKER SEL setting are set to “OFF”.
2. Touch the []] key of the STATUS item.
3. Touch the [ON] or [OFF] key of the DSF item
to set the function ON or OFF.
* This function is not available for speakers
whose SPEAKER SEL setting is set to “OFF”.
4. Touch the [Back] key to return to the previous
screen.
Note:
• If the DSF effect is set to OFF, the adjustment
made in “DSF” is not reflected in the music source.
[BAND]:
Select the channel to be compensated
(“BAND1”, “BAND2”, “BAND3”).
* The factory default setting is “BAND1”.
[FREQUENCY]:
Selecting the DSF type
1. Press the [ADJ] button, and touch the
[AUDIO] key.
2. Touch the []] key of the DSF item.
3. Touch the key for the desirable type to select.
Select the center frequency that you want to
compensate from the range of 18 Hz to
20 kHz. (1/3 octave step, 31 points)
* The factory default setting is “1 kHz”.
[Q]:
4. Touch the [Back] key to return to the previous
Set the sharpness of the Q-curve to one of the
parameters: 1, 3, 5, 7 and 20.
* The factory default setting is “1”.
screen.
P.EQ mode
[GAIN]:
Adjust the gain (output level) in the range of
–6 dB to +6 dB. (1 dB step, 13 points)
* The factory default setting is “0”.
P.EQ effect ON/OFF
* The factory default setting is “OFF”.
4. Touch the [Back] key to return to the previous
1. Press the [ADJ] button, and touch the
[AUDIO] key.
screen.
2. Touch the []] key of the STATUS item.
3. Touch the [ON] or [OFF] key of the P.EQ item
to set the function ON or OFF.
4. Touch the [Back] key to return to the previous
screen.
Note:
• If the P.EQ effect is set to OFF, the adjustment
made in “P.EQ” is not reflected in the music
source.
61
Download from Www.Somanuals.com. All Manuals Search And Download.VRX765VD
5.1 ch Surround Decoder Operations
●Balance/Fader adjustment
Selecting the Dolby PL II (Dolby Pro
Logic II ) type
3-1. Touch the []] key of the BAL/FAD item.
Touch the [{] or [}] key to adjust the fader
level.
* The factory default setting is “OFF”.
* This setting is disabled when both the CENTER
SP and SURROUND SP items of the SPEAKER
SEL setting are set to “OFF”.
1. Press the [ADJ] button, and touch the
[AUDIO] key.
2. Touch the []] key of the Dolby PL II item.
3. Touch the key for the desirable type to select.
[{] key :
emphasized the sound from the front
speakers.
[}] key :
emphasized the sound from the rear
speakers.
4. Touch the [Back] key to return to the previous
3-2. Touch the [[] or []] key to adjust the balance
screen.
level.
Output adjustment of subwoofer
volume, center volume and balance/
fader
1. Press the [ADJ] button, and touch the
[AUDIO] key.
2. Touch the []] key of the DETAIL item to
display the submenu.
3. Perform the following adjustments:
[[] key :
emphasized the sound from the left
speakers.
[]] key :
emphasized the sound from the right
speakers.
4. Touch the [Back] key to return to the
previous screen.
●Subwoofer volume adjustment
3-1. Touch the [[] or []] key of the
SUBWOOFER VOL item to adjust to
desirable level (Setting range : –6 to 3).
* The factory default setting is “0”.
●Center volume adjustment
3-1. Touch the [[] or []] key of the CENTER VOL
item to adjust to desirable level (Setting
range : –6 to 0).
* The factory default is “0”.
62
VRX765VDDownload from Www.Somanuals.com. All Manuals Search And Download.
12.IN CASE OF DIFFICULTY
GENERAL
Problem
Cause
Measure
Power does not turn Fuse is blown.
on. (No sound is
Replace with a fuse of the same amperage. If the
fuse blows again, consult your store of purchase.
produced.)
Incorrect wiring.
Consult your store of purchase.
Nothing happens
when buttons are
pressed.
The microprocessor has
malfunctioned due to
noise, etc.
Turn off the power and remove the DCP. Press the
reset button for about 2 seconds with a thin rod.
Note:
When the Reset button is pressed, turn off the ACC
power.
Display is not
accurate.
The Reset button
* When the Reset button is pressed, frequencies of
TV/radio stations, titles, etc. stored in memory are
cleared.
The remote
controller does not
work.
Direct rays of the sun fall on When direct rays of the sun fall on the light-
the light-receptive part of
the remote controller.
receptive part of the remote controller, it may not
work.
The batteries of the remote Check the batteries of the remote controller unit.
controller unit are dead or
there is no battery in the
remote controller unit.
DVD Player
Problem
Cause
Measure
Disc cannot be
loaded.
Another disc is already
loaded.
Eject the disc before loading the new one.
There is a foreign matter
already in place.
Eject the foreign matter forcibly.
Sound skips or is
noisy.
Compact disc is dirty.
Clean the compact disc with a soft cloth.
Compact disc is heavily
scratched or warped.
Replace with a compact disc with no scratches.
Sound is bad directly Water droplets may form
after power is turned on the internal lens when
Let dry for about 1 hour with the power on.
Check that the parking brake is engaged.
on.
the car is parked in a humid
place.
The image is not
displayed.
The parking brake is not
engaged.
Disccannotplaywith The view is limited.
the display
“PARENTAL
VIOLATION” shown.
Release the view limitation or change the parental
level.
See the subsection “Setting up the parental
level”.
63
Download from Www.Somanuals.com. All Manuals Search And Download.VRX765VD
TV/VTR(When connecting an optional TV tuner, etc.)
Problem
Cause
Measure
The image is not
displayed.
The parking brake is not
engaged.
Check that the parking brake is engaged.
The display is dark. The brightness control is
too low.
Adjust the brightness properly.
The operating condition is The temperature inside the vehicle may be 0°C or
not good.
lower. Set to an appropriate temperature (25°C or
so) and check it again.
The headlight of the vehicle The display is made dark at night to prevent the
is lit.
glare (When the headlight of the vehicle is lit in the
daytime, the display gets dark).
The color of the
display is light or a
shade of color is not
good.
The color is not adjusted
adequately.
Check that Color and Hue are adjusted properly.
When the VTR is
connected, the
Improper NTSC/PAL
setting
Set the NTSC/PAL properly according to the VTR.
image is disturbed.
When the TV tuner is Bad receiving condition
connected, the
image gets unclear.
A radio wave may not reach sufficiently due to
obstruction of mountains or buildings. Check it
again at a place where a radio wave can be
received properly.
The TV tuner has a Bad receiving condition
double or triple
image.
It may be under the influence of radio wave
reflected by mountains or buildings. Check it again
after changing place or direction.
The TV tuner has
spots or stripes in
the image.
Presence of jamming
It may be under the influence from automobiles,
streetcar, power cable, neon sign, and so forth.
Check it again after changing place.
There are red,
green, and blue
points in the display.
This is not a failure, but a phenomenon peculiar to
a liquid crystal panel (The liquid crystal panel is
produced according to technology with very high
precision. Note that, though there are effective
pixels of 99.99% or more, pixel missing or
normally lit pixels account for 0.01%).
64
VRX765VDDownload from Www.Somanuals.com. All Manuals Search And Download.
13.ERROR DISPLAYS
If an error occurs, one of the following displays is displayed.
Take the measures described below to solve the problem.
DVD PLAYER
Problem
ERROR 2
Cause
Measure
A CD is caught inside the
CD deck and is not ejected. consult your store of purchase.
This is a failure of CD deck’s mechanism and
ERROR 3
ERROR 6
A CD cannot be played due Replace with a non-scratched, non-warped disc.
to scratches, etc.
A CD is loaded upside-
down inside the CD deck
and does not play.
Eject the disc then reload it properly.
CD CHANGER
Problem
Cause
Measure
ERROR 2
A CD inside the CD
changer is not loaded.
This is a failure of CD changer’s mechanism and
consult your store of purchase.
ERROR 3
ERROR 6
A CD inside the CD
changer cannot be played
due to scratches, etc.
Replace with a non-scratched, non-warped disc.
A CD inside the CD
changer cannot be played
because it is loaded
upside-down.
Eject the disc then reload it properly.
For the DVD changer, refer to the Owner’s Manual provided with the DVD changer.
If an error display other than the ones described above appears, press the Reset button. If the problem
persists, turn off the power and consult your store of purchase.
* When the reset button is pressed, frequencies of TV/radio stations, titles, etc. stored in memory are cleared.
65
Download from Www.Somanuals.com. All Manuals Search And Download.VRX765VD
14.SPECIFICATIONS
FM Tuner
Frequency Range: 87.9 MHz to 107.9 MHz
Usable Sensitivity: 9 dBf
50dB Quieting Sensitivity: 15 dBf
Alternate Channel Selectivity: 70 dB
Stereo Separation (1 kHz): 35 dB
Frequency Response (±3 dB): 30 Hz to 15 kHz
LCD Monitor
Screen Size: 7-inch wide type
6" Width (152 mm) × 3-5/16" Height (85 mm)
Display method:
Transmission type TN liquid crystal display
Drive method: TFT (thin-film transistor)
active matrix driving
Pixels: 336,960 (1440 × 234)
AM Tuner
General
Power source voltage:
Frequency Range: 530 kHz to 1710 kHz
Usable Sensitivity: 28 dBµV
14.4 V DC (10.8 to 15.6 V allowable)
Ground: Negative
Current consumption: 4.0 A (1 W)
Auto Antenna Rated Current: 500 mA less
Dimensions of the Main Unit:
7" Width (178 mm) × 1-15/16" Height
(50 mm) × 6-1/2" Depth (165 mm)
Weight of the Main Unit: 2.4 kg
Dimensions of the Remote Control Unit:
2-1/8" Width (54 mm) × 1-1/8" Height
(28.8 mm) × 6-1/8" Depth (155 mm)
Weight of the Remote Control Unit:
100 g (including battery)
DVD Player
System:
Digital Versatile Disc System with CDDA
capable
Usable discs:
DVD video disc, Compact disc
Frequency Response:
20 Hz to 20 kHz (CD) (±1 dB)
Dynamic Range: 100 dB (1 kHz)
Distortion: 0.01%
Audio Amplifier
Maximum power output:
200 W (50 W × 4)
Speaker impedance: 4 Ω (4 to 8 Ω)
Input
Audio input:
130 ±60mVrms (High)
600 ±80mVrms (Mid)
840 ±100mVrms (Low)
(input impedance 10 kΩ or greater)
Video input:
6-3/4" (172 mm)
7" (178 mm)
1-15/16"
(50 mm)
1.0 ±0.2 Vp-p (input impedance 75 Ω)
Note:
Video Output
• Specifications comply with JEITA Standards.
• Specifications and design are subject to change
without notice for further improvement.
Video output:
1.0 ±0.2 Vp-p (output impedance 75 Ω)
Power Output :
19 W RMS x 4 Channels at 4 Ω
and 1 % THD+N
Signal to Noise Ratio:
75 dBA (reference: 1 W into 4 Ω)
66
VRX765VDDownload from Www.Somanuals.com. All Manuals Search And Download.
INSTALLATION AND WIRE
CONNECTION MANUAL
1. BEFORE STARTING
1. This set is exclusively for use in cars with a
negative ground 12 V power supply.
2. Read these instructions carefully.
3. Be sure to disconnect the battery “-” terminal
before starting. This is to prevent short circuits
during installation. (Figure 1)
Car battery
Figure 1
2. PACKAGE CONTENTS
1 Main unit
2 Manuals
Owner’s manual & Installation manual
Warranty card
3 Power supply lead
4 Rca pin cord
6 Bag for accessories (No. 2)
Hook plate ................................................... 2
Cord clamp
7 Bag for accessories (NO. 3)
Rca cap ..................................................... 12
8 Universal mounting bracket
9 Remote control unit
5 Bag for accessories (No. 1)
Flat head screw (M5 × 8)............................. 4
Sems hexagonal bolt (M5 × 8)..................... 5
Electro tap
0 Battery
(for remote control unit)
! Outer Escutcheon
@ DCP Case
Machine screw (M4 × 3) .............................. 4
3. GENERAL CAUTIONS
1. Do not open the case. There are no user-
serviceable parts inside. If you drop anything
into the unit during installation, consult your
dealer or an authorized Clarion service
center.
2. Use a soft, dry cloth to clean the case. Never
use a rough cloth, thinner, benzine, or alcohol,
etc. For tough dirt, apply a little cold or warm
water to a soft cloth and wipe off the dirt
gently.
67
Download from Www.Somanuals.com. All Manuals Search And Download.VRX765VD
4. CAUTIONS ON INSTALLATION
1. Prepare all articles necessary for installing the
main unit before starting.
5. Use the included screws for installation. Using
other screws can cause damage. (Figure 4)
2. This model features a liquid crystal panel that
slides forward (shell loading system).
On some types of cars, the liquid crystal panel
may make contact with the dashboard or shift
lever, in which cause it cannot be installed.
Before installing, check that the unit will not
hamper operation of the shift lever or obstruct
your view before selecting the installation
location. (Figure 2)
Chassis Chassis
Damage
Max. 8 mm (M5 screw)
Figure 4
6. The source unit has mounting screw holes for
NISSAN (N marks) and TOYOTA (T marks)
vehicles.
Dashboard
T
N
T
Shift lever
Shift lever
(check that it does not
touch the LCD.)
N
T
N
Figure 2
Figure 5
3. Install the unit within 30° of the horizontal
plane. (Figure 3)
Max. 30˚
Figure 3
4. If you have to do any modification on the car
body, such as drilling holes, consult your car
dealer beforehand.
68
VRX765VDDownload from Www.Somanuals.com. All Manuals Search And Download.
5. INSTALLING THE MAIN UNIT
Note:
Universal Mount
*1 Some car models require special mounting kits
1. Place the universal mounting bracket into the
instrument panel, use a screwdriver to bend
each stopper of the universal mounting
bracket inward, then secure the stopper as
shown in Figure 6.
for proper installation. Consult your Clarion
dealer for details.
*2 Fasten the front stopper securely to prevent the
main unit from coming loose.
2. Wire as shown in Section 8.
3. Insert the main unit into the universal
mounting bracket until it locks.
4. Mount the outer escutcheon so that all the
hooks are locked.
Strap
• Console opening dimensions
This part is not provided.
*
7-3/16" (182 mm)
Instrument panel
Hole
Hole
Stoppers
Hexagonal
bolt
Screwdriver
Main unit
Universal mounting bracket
Stoppers
2-Spring
Outer escutcheon
Note:
Set the outer escutch-
eon so that its metallic
part on the back side
fits the upper edge of
the main unit.
Figure 6
69
Download from Www.Somanuals.com. All Manuals Search And Download.VRX765VD
Fixed Mount (TOYOTA, NISSAN and other ISO/DIN equipped vehicles)
This unit is designed for fixed installation in the
dashboard.
If the vehicle is equipped with a factory-installed
radio, install the main unit with the parts and
screws marked (*). (Figure 8)
If the vehicle is not equipped with a factory-
installed radio, obtain an installation kit to install
the main unit in the following procedure.
1. Remove the screws from both side of the
main unit. Then, at either side, lift the leaf
spring until the engaging claws are released
from the holes, and slide the spring to the
direction of arrow to remove it. Repeat the
same for the other side to remove the springs
from the both sides. (Figure 7)
2. Secure the mounting brackets to the chassis
as shown in Figure 8. Holes are pre-tapped
for TOYOTA and NISSAN vehicles;
modification, such as drilling new holes, of the
mounting brackets may be required for other
models.
3. Wire as shown in Section 8.
4. Secure the unit in the dashboard, and then
reassemble the dashboard and the center
panel.
2-Screw
Engaging claw
Main Unit
2-Spring
Screwdriver
Figure 7
Mounting bracket
(1 pair for the left and right sides)
4-Hexagonal screw ∗ (M5 × 8)
Main Unit
Pocket
Note 2
Center Panel (Note 1)
∗: The screws with this mark are
enclosed in this set.
★:The parts and screws with this mark
are used to install radio or included in
the installation kit.
Figure 8
Note 2: If the hook on the installation bracket
Note 1: In some cases, the center panel may
require some modification (trimming,
filling, etc.).
interferes with the unit, bend and flatten it
with a nipper or a similar tool.
70
VRX765VDDownload from Www.Somanuals.com. All Manuals Search And Download.
6. REMOVING THE MAIN UNIT
Note:
1. When the rear of the main unit has been
secured with the method shown in Figure 6
unfasten the special screw.
• Keep the hook plate. You cannot remove the main
unit without disengaging the hook plate.
2. Remove the outer escutcheon.
3. Insert the hook plate between the spring and
the universal mounting bracket, fit tab B of
the spring into hole A of the hook plate, then
pull the main unit out by the hook plate. (Insert
both the right and left edges of the hook
plate.) (Figure 9)
Instrument panel
Universal mounting bracket
2-Hook plate
Main
Unit
Spring
Outer escutcheon
A
B
Figure 9
7. CAUTIONS ON WIRING
Note:
1. Be sure to turn the power off before wiring.
• There are various types of fuse holder. Do not let
the battery side touch other metal parts.
2. Be particularly careful where you route the
wires.
Keep them well away from the engine, and
exhaust pipe, etc. Heat may damage the
wires.
caution
CAUTION
After the connection, fix the lead by a clamp
or insulation tape for protection.
3. If the fuse should blow, check to see if the
wiring is correct.
If a fuse is blown, replace it with a new one of
the same amperage rating as the original
(15A FUSE).
Fuse (15A FUSE)
4. To replace the fuse, remove the old fuse of
the power supply lead and insert the new one.
(Figure10)
Fuse holder
Figure 10
71
Download from Www.Somanuals.com. All Manuals Search And Download.VRX765VD
8. WIRE CONNECTION
Note:
• Before installing, be sure to disconnect the negative cable of the car battery.
• In the optional devices, the RCA Pin and the Connector cable are separately-sold items.
Radio antenna jack
TV tuner input terminal or
DVD changer input terminal
iPod
Yellow
Connector cable
(CCA-670-600)
CeNET
terminal
Optical output
connector
Red
4-Channel Amplifier
Gray
Right
left
Front audio output
terminal
White
Red
Black
Right
left
Rear audio output
terminal
White
Red
Purple
Gray
Right
left
Non fader
output terminal
White
Yellow
Rear monitor
Video output terminal
Red
Right
Green
(2-ZONE
output terminal)
Wireless
Head phone
Left
White
Yellow
Video
VTR etc.
White
Red
Black
Red
Visual input
terminal
Audio (left)
Audio (right)
72
VRX765VDDownload from Www.Somanuals.com. All Manuals Search And Download.
Yellow
Black
+12V main power
Ground
Purple
Rear right +
Purple/Black
Red
Rear right -
+12V accessory
Gray
Front right +
Front right -
Gray/Black
White
Front left +
Front left -
White/Black
Green
Rear left +
Rear left -
Green/Black
Blue/White
Amplifier turn-on lead
Orange/White
Blue
Illumination
Auto antenna
Brown
Phone mute (*1)
Grass-green
Parking brake lead
*1 Connecting the PHONE MUTE terminal
The lead included with the unit must be connected to the specified
position of the vehicle’s connector in order to use the “Triggered
audio mute for cellular telephones” function.
●Connecting the parking brake lead
Connect the lead to parking brake lamp ground in
the meter panel.
Parking brake lamp
+ lead to battery
Note:
Connect these three leads.
• Connecting the parking brake lead to lamp ground
allows you to watch TV/VTR/DVD video/video CD
when the parking brake is engaged.
• When the parking brake lead is not connected, the
monitor will not turn on.
- cord
parking
brake sig-
nal lead
Parking brake lead
(grass-green)
• If “AUDIO ONLY” appears on the screen just after
turning on the ACC power of the car, release the
parking brake while confirming safety, and then
engage the parking brake again.
Parking brake
73
Download from Www.Somanuals.com. All Manuals Search And Download.VRX765VD
Connecting the Accessories
●Connection to the external amplifier
The external amplifier can be connected unless the 5.1ch Surround Decoder is connected. For
detailed information, refer to the instruction manual of the 5.1ch Surround Decoder.
●Connection to the CCD camera for vehicle
The CCD camera for vehicle can be connected to CCD terminal on the TV tuner. For detailed
information, refer to the instruction sheet or manual for the CCD camera.
Note:
• A power supply box (sold separately) is required for connection of the main unit and the CCD camera.
• The power supply box for the camera CAA147 cannot be used. Please use the CAA188 instead.
●If the specified lead of the cellular phone is connected to the phone mute lead of the source
unit, the audio mute is available when the cellular phone is used.
●Satellite Radio Receiver
When a Satellite Radio Receiver is to be connected, use the CeNET connector. For detailed
information,refer to the instruction manual of the Satellite Radio Receiver.
●TV Tuner
When the TV tuner is to be connected, connect the CeNET connector and RCA PIN (yellow). For
detailed information, refer to the instruction manual of the TV tuner.
●DVD Changer
To connect the TV tuner and the DVD changer simultaneously, use a commercial video selector
purchasing separately.
●iPod
When you connect the iPod with video features by using the connector cable CCA-670-600, the video
data stored in the iPod cannot be displayed on the liquid crystal panel of this unit.
Use the Clarion’s new connector cable which is released soon.
74
VRX765VDDownload from Www.Somanuals.com. All Manuals Search And Download.
9. SAMPLE SYSTEM
VRX765VD
Yellow
Video
Selector
Front
Speakers
(Gray)
RCA video cable
(included the TV tuner)
RCA cable
(sold separately)
Non fader
output
Rear
Speakers
CeNET cable
(included
the TV tuner)
4-Channel
Amplifier
RCA cable
(sold separately)
TV Tuner
(TTX7501z)
Center speaker
built-in amplifier
CeNET cable
(SRK5)
(included the SIRIUS)
*XM ; sold separately
Powered sub-woofer
built-in amplifier
(SRV303)
Satellite Radio
Receiver
RCA cable (sold separately)
CeNET CD Changer
(DCZ625)
RCA cable
(included
CeNET cable
(included the
DVH940)
the DVH940)
CeNET Y-adapter
(CCA-519-601,
sold separately)
Ferrite clamp
(Included the
DVD changer)
5.1 ch Surround
Decoder
(Black)
(DVH940)
CeNET DVD Changer
(VCZ625)
CeNET Cable
(included the Changer)
(Gray)
Set the [SLAVE/STAND ALONE]
switch to the [SLAVE] position.
STAND
Set the [CeNET/STAND ALONE] switch
to the [CeNET] position.
SLAVE
ALONE
Digital optical fiber cable
(DCA-005/008, sold separately)
STAND
CeNET
ALONE
75
Download from Www.Somanuals.com. All Manuals Search And Download.VRX765VD
76
VRX765VDDownload from Www.Somanuals.com. All Manuals Search And Download.
Clarion Co., Ltd.
All Rights Reserved.Copyright © 2006: Clarion Co., Ltd.
Printed in Japan / Imprim au Japon / Impreso en Japón
QC-6823B
280-8358-00
é
2006/1 (Y-YI)
Download from Www.Somanuals.com. All Manuals Search And Download.
|