I N S T A LL A T I O N IN S T R U C T IO N S
RPA SERIES PROJECTOR LOCK
(PL-4)
The PL-4 Projector Lock is designed to provide security
PARTS LIST
for your LCD/DLP Projector when it is attached to the
Unpack the shipping carton and check for the contents
RPA series ceiling mount.
listed in Table 1.
Table 1. Parts List
INSTALLATION
1. Two methods of installation are possible:
REF
10
DESCRIPTION
ADHESIVE RETAINER PLATE
CABLE LOCK ASSEMBLY
KEYS
QTY
a. Run steel cable through projector handle and
then through RPA series ceiling mount.
1
1
2
1
20
b. Before attaching adhesive plate, clean area on
projector with alcohol wipe. Attach the adhesive
retainer plate to exterior chassis of the projector.
30
40
ALCOHOL WIPE
NOTE: Adhesive will secure retainer in plate to
projector and become fixed. For maximum
adhesive strength, adhere retainer plate to
projector and do not attempt to remove the
cable lock right away. Allow the adhesive to
become stronger and cure over time.
2. Securely lock cable to cylinder lock.
3. Retain keys.
Lock
Assembly
SLB- Hanging
Bracket
RPA
Projector
Clip Retainer with
Adhesive Backing.
Adhere to Projector.
Chief Manufacturing, a division of Milestone AV Technologies
8803-000039 Rev. C
8401 Eagle Creek Parkway
Savage, MN 55378 USA
P: 800.582.6480 / 952.894.6280 F: 877.894.6918 / 952.894.6918
©2008 Milestone AV Technologies
10/08
Download from Www.Somanuals.com. All Manuals Search And Download.
|