User Manual
Download from Www.Somanuals.com. All Manuals Search And Download.
Table of Contents
Table of Contents
1. Before You Begin ........................................................................................................................................1
Claims............................................................................................................................................................................................ 1
Safety Notes...................................................................................................................................................................... 2
2. Introduction .................................................................................................................................................3
Product Description........................................................................................................................................................... 3
Product Overview.............................................................................................................................................................. 4
3. Setup............................................................................................................................................................6
Fuse Replacement......................................................................................................................................................................... 6
4. Operation.....................................................................................................................................................11
Navigation Buttons......................................................................................................................................................................... 11
Service Menu................................................................................................................................................................................. 15
5. Technical Information .................................................................................................................................22
Q-Spot™ 460-LED User Manual Rev. 5
-iii-
Download from Www.Somanuals.com. All Manuals Search And Download.
Table of Contents
Returns.............................................................................................................................................................................. 22
6. Technical Specifications.............................................................................................................................23
iv
Q-Spot™ 460-LED User Manual Rev. 5
Download from Www.Somanuals.com. All Manuals Search And Download.
Before You Begin
1. Before You Begin
·
·
·
·
·
Q-Spot™ 460-LED
2 Omega Brackets
Power Cable
Warranty Card
Quick Reference Guide
What Is Included
Carefully unpack the product immediately and check the box to make sure all the parts
are in the package and are in good condition.
Claims
If the box or the contents (the product and included accessories) appear damaged from
shipping or show signs of mishandling, notify the carrier immediately, not CHAUVET®.
Failure to report damage to the carrier immediately may invalidate your claim. In
addition, keep the box and contents for inspection.
For other issues, such as missing components or parts, damage not related to shipping,
or concealed damage, file a claim with CHAUVET® within 7 days of delivery.
Manual Conventions
Convention
Meaning
1~512
50/60
A range of values in the text
A set of mutually exclusive values in the text
A button on the product’s control panel
<SET>
Settings
MENU>Settings
1~10
A product function or a menu option
A sequence of menu options
A range of menu values from which to choose in a menu
A set of two mutually exclusive menu options in a menu
A unique value to be entered or selected in a menu
Yes/No
ON
Symbols
Symbols
Meaning
Critical installation, configuration, or operation information.
Failure to comply with this information may cause the product not
to work, damage third-party equipment, or cause harm to the
operator.
Important installation or configuration information. Failure to
comply with this information may keep the product from working.
Useful information.
The term “DMX” used throughout this manual refers to the USITT DMX512-A
digital data transmission protocol.
Q-Spot™ 460-LED User Manual Rev. 5
1
Download from Www.Somanuals.com. All Manuals Search And Download.
Before You Begin
Use on Dimmer
Outdoor Use
Auto Programs
x
x
P
P
Product at a Glance
Auto-Ranging Power
Supply
Sound Activated
DMX
Replaceable Fuse
User Serviceable
Duty Cycle
P
P
P
P
x
x
Master/Slave
Please read the following Safety Notes carefully before starting to work with the product.
These notes provide important safety information about the installation, usage, and
maintenance.
Safety Notes
This product contains no user-serviceable parts. Any reference to servicing in this
User Manual will only apply to properly trained CHAUVET® certified technicians.
Do not open the housing or attempt any repairs.
Please refer to all applicable local codes and regulations for the proper
installation of the product.
·
·
·
·
Avoid direct eye exposure to the light source while the product is on.
Personal Safety
Always disconnect this product from its power source before servicing.
Always connect this product to a grounded circuit to avoid the risk of electrocution.
Do not touch this product’s housing during operation because it may be very hot.
·
This product is for indoor use only! To prevent risk of fire or shock, do not expose this
product to rain or moisture.
Mounting and Rigging
·
·
Make sure there are no flammable materials close to this product while it is operating.
When hanging this product, always secure to a fastening device using a safety cable
(not included).
·
·
Always carry this product by the handles. Do not carry from the head.
Always make sure you are connecting this product to the proper voltage in
accordance with the specifications in this manual or on the product’s specification
label.
Never connect this product to a dimmer pack or rheostat.
Never disconnect this product by pulling or tugging on the power cable.
Power and Wiring
Operation
·
·
·
Do not operate this product if you see damage on the housing, lenses, or cables.
Have the damaged parts replaced by an authorized technician at once.
Do not cover the ventilation slots when operating to avoid internal overheating.
Do not aim this product toward the Sun. The lenses could concentrate the solar
energy and cause internal overheating.
·
·
·
The maximum ambient temperature is 104° F (40° C). Do not operate this product at
a higher temperature.
·
In case of a serious operating problem, stop using this product immediately!
In the unlikely event that your CHAUVET® product may require service, contact
CHAUVET® Technical Support.
LEDs gradually decline in brightness over time, mostly because of heat. Packaged in
clusters, LEDs exhibit higher operating temperatures than in ideal, single-LED
conditions. For this reason, using clustered LEDs at their fullest intensity significantly
reduces the LEDs’ lifespan. Under normal conditions, this lifespan can be 40,000 to
50,000 hours. If extending this lifespan is vital, lower the operating temperature by
improving the ventilation around the product and reducing the ambient temperature to an
optimal operating range. In addition, limiting the overall projection intensity may also help
to extend the LEDs’ lifespan.
Expected LED Lifespan
2
Q-Spot™ 460-LED User Manual Rev. 5
Download from Www.Somanuals.com. All Manuals Search And Download.
Introduction
2. Introduction
The Q-Spot™ 460-LED is a high-power moving yoke product equipped with 7 10-watt white
LEDs. This product includes a color wheel with 7 colors, plus white, and 2 gobo wheels. Gobo
wheel #1 has 7 fixed gobos, plus open. Gobo Wheel #2 has 6 rotating slot-n-lock gobos, plus
open. In addition, the Q-Spot™ 460-LED includes remote focus and a rotating 3-facet prism.
Product
Description
·
·
·
·
·
·
·
·
Patented optical and lens path for superior output
Crisp focus provides stunning gobo images
Lightweight and easy to hang
Quiet operation for the most discerning of installations
DMX channels: 11 or 14
Pan: 540°
Tilt: 270°
Colors Wheel:
Features
·
·
7 colors plus white
Continuous scroll at variable speeds
Gobo wheel (static):
·
·
·
·
7 gobos,
Continuous scroll at variable speeds
Gobo wheel (rotating):
·
·
·
·
6 gobos
Interchangeable
Slot-n-lock
Continuous scroll at variable speed
3-facet rotating prism
·
·
·
·
·
·
·
·
·
·
·
·
·
Variable electronic dimmer (0~100%)
Remote fixture reset
Move-in-black for pan/tilt
Built-in automated programs
Built-in sound activated programs
255 user-programmable steps without DMX controller
High-powered, 7 (10 W) LEDs
User-selectable pan/tilt ranges
Automatic pan/tilt correction
Reset to factory settings option
User-selectable basic or advanced operating modes
Easy access door for gobo change
Q-Spot™ 460-LED User Manual Rev. 5
3
Download from Www.Somanuals.com. All Manuals Search And Download.
Setup
3. Setup
Each Q-Spot™ 460-LED has an auto-ranging power supply that works with an input
voltage range of 100~240 VAC, 50/60 Hz. To determine the power requirements for
each Q-Spot™ 460-LED, refer to the label affixed to the product. You can also refer to
AC Power
The listed current rating indicates the maximum current draw during normal operation.
For more information, you may download Sizing Circuit Breakers from the CHAUVET®
Always connect this product to a protected circuit with an appropriate electrical
ground to avoid the risk of electrocution or fire.
Never connect this product to a rheostat (variable resistor) or dimmer circuit, even
if the rheostat or dimmer channel serves only as a 0 to 100% switch.
The Q-Spot™ 460-LED comes with a power input cord terminated with a Neutrik®
powerCON® A connector on one end and an Edison plug on the other end (U.S.
market). If the power input cord that came with your product has no plug, or if you need
to change the Edison plug, use the table below to wire the new plug.
AC Plug
Connection
Wire (U.S.)
Wire (Europe)
Screw Color
AC Live
Black
White
Brown
Blue
Yellow or Brass
Silver
AC Neutral
AC Ground
Green/Yellow
Green/Yellow
Green
Make sure to disconnect the product’s power cord before replacing a blown fuse.
Always replace with a fuse of the same type and rating.
The Q-Spot™ 460-LED supports power linking. You can power link up to 7 products at
120 VAC or 14 products at 230 VAC. This product comes with a power input cord. This
product does not come with a power linking cable; however, a power linking cable is
available as an option.
Power Linking
1. Disconnect this product from the power outlet.
2. Using a Phillips #2 head screwdriver, unscrew the fuse holder cap from the housing.
Fuse Replacement
3. Remove the blown fuse and replace with a good fuse of the same type and rating
(T 3.15 A, 250 V).
4. Screw the fuse holder cap back in place and reconnect power.
6
Q-Spot™ 460-LED User Manual Rev. 5
Download from Www.Somanuals.com. All Manuals Search And Download.
Setup
You can link the Q-Spot™ 460-LED to a DMX controller using a standard DMX serial
connection. If using other DMX compatible products with the Q-Spot™ 460-LED, you
can control each individually with a single DMX controller.
DMX Linking
The Q-Spot™ 460-LED uses the standard DMX data connection for the 11 and 14
channel DMX modes.
DMX Modes
·
·
work in these modes.
·
modes.
The Master/Slave mode allows a Q-Spot™ 460-LED (the “master product”) to control
one or more Q-Spot™ 460-LEDs (the “slave products”) without a DMX controller. One Q-
Spot™ 460-LED becomes the master product when running an Auto or Custom
program.
Master/Slave
Connectivity
You must configure each slave product’s control panel to operate in SLAVE mode.
During Master/Slave operation, the slave products will operate in unison with the master
product.
DO NOT connect a DMX controller to products operating in Master/Slave mode.
The DMX controller signals may interfere with the signals from the master
product.
configure the Master and Slave products.
If you are not familiar with or need more information about DMX standards,
Master/Slave connectivity, or the DMX cables needed to link this product to a DMX
controller, download the DMX Primer from the CHAUVET® website:
Q-Spot™ 460-LED User Manual Rev. 5
7
Download from Www.Somanuals.com. All Manuals Search And Download.
Setup
The Q-Spot™ 460-LED includes 2 gobo wheels Gobo wheel #1 has 7 fixed gobos, while
Values tables.
Gobo Wheels
The Q-Spot™ 460-LED includes one color wheel with 7 fixed colors. The diagram shows
Color Wheel
8
Q-Spot™ 460-LED User Manual Rev. 5
Download from Www.Somanuals.com. All Manuals Search And Download.
Setup
1. Turn the product off and disconnect from power.
2. Unlock the gobo cover and slide it away.
Gobo Replacement
3. Separate the gobo plate away from the gobo wheel by pushing it toward the front of
the moving head (direction 1 in the diagram). Be careful not to push the gobo out of
the gobo plate.
4. Extract the gobo plate by pulling it outward (direction 2 in the diagram).
5. On a flat surface, remove the expansion ring that holds the gobo in place and
remove the gobo from the gobo plate.
6. Insert a new gobo and hold it in place with the expansion ring.
7. Slide the tip of the gobo plate under the pressure plate near the center of the gobo
wheel.
8. Push the gobo plate inwards. DO NOT force the gobo plate into the gobo wheel slot.
If correctly installed, the gobo plate should easily snap itself into the gobo wheel slot.
Gobo Plate #1 contains a magnet used by the product for positioning purposes.
When replacing gobos, be sure to return gobo plate #1 to position #1 on the
wheel.
Q-Spot™ 460-LED User Manual Rev. 5
9
Download from Www.Somanuals.com. All Manuals Search And Download.
Setup
Mounting
Always mount this product in a safe position and make sure there is adequate room for
ventilation, configuration, and maintenance.
Orientation
CHAUVET® recommends using the following general guidelines when mounting this
product.
Rigging
·
·
·
·
When selecting an installation location, consider easy access to this product for
operation, programming adjustments, and routine maintenance.
Make sure to mount this product away from any flammable material as indicated in
Never mount in places where rain, high humidity, extreme temperature changes, or
restricted ventilation may affect the product.
If hanging this product, make sure that the mounting location can support the
requirements of this product.
·
When hanging this product, always secure to a fastening device using a safety cable
(not included).
The Q-Spot™ 460-LED comes with an already installed mounting bracket to which you
will be able to attach the two included omega clamps. Be aware that you will have to use
two mounting points per product. In addition, you will have to use a safety cable (not
included) to link the product to the structure.
Product Mounting Diagram
Floor Mounting
Overhead Mounting
10
Q-Spot™ 460-LED User Manual Rev. 5
Download from Www.Somanuals.com. All Manuals Search And Download.
Operation
4. Operation
Button
Function
Control Panel
Description
<MENU>
Exits from the current menu or function
<ENTER>
Enables the currently displayed menu or sets the currently
selected value in to the current function
<UP>
Navigates upward through the menu list and increases the
numeric value when in a function
<DOWN>
Navigates downward through the menu list and decreases the
numeric value when in a function
You can set the Q-Spot™ 460-LED start address in the 001~512 DMX range. This
allows for the control of up to 36 products in the 14-channel PERSON1 mode. The Q-
Spot™ 460-LED works with any compatible DMX controller using standard DMX cables.
Control Options
Carry out all the programming procedures indicated below from the control panel. Refer
Programming
·
To go to an option in the Menu Level, press <MENU> repeatedly until the option
shows on the display. Press <ENTER> to select. This will take you to the first
programming level for that option.
Navigation Buttons
·
To select an option or value within the current programming level, press <UP> or
<DOWN> until the option shows on the display. Press <ENTER> to select. If there is
another programming level, you will see the next option or you will see the selected
value.
·
To exit to the previous menu level, press <MENU>.
1. Select ADDRESS.
DMX Address
DMX Mode
2. To change the current address, press <ENTER>.
a. Change the starting address (001~512).
b. Press <ENTER>.
1. Select PERSON.
2. To change the current mode, press <ENTER>.
a. Select a DMX mode (PERSON1/PERSON2).
b. Press <ENTER>.
Q-Spot™ 460-LED User Manual Rev. 5
11
Download from Www.Somanuals.com. All Manuals Search And Download.
Operation
Product Settings
1. Select SETTINGS > PERFORM > PT SPEED.
a. Select FAST for fast movement or SLOW to use the normal speed.
b. Press <ENTER>.
Pan/Tilt Speed
1. Select SETTINGS > PERFORM > PAN INV.
2. To reverse the pan direction, press <ENTER>.
Reverse Pan Direction
a. Select INVERT to reverse the pan direction or NORM to use the normal pan
direction.
b. Press <ENTER>.
1. Select SETTINGS > PERFORM > TILT INV.
2. To reverse the tilt direction, press <ENTER>.
Reverse Tilt Direction
a. Select INVERT to reverse the tilt direction or NORM to use the normal tilt
direction.
b. Press <ENTER>.
1. Select SETTINGS > PERFORM > DIM INV.
2. To reverse the dimmer direction, press <ENTER>.
Reverse Dimmer Direction
a. Select INVERT to reverse the dimmer direction or NORM to use the normal
dimmer direction.
b. Press <ENTER>.
3. Select SETTINGS > PERFORM > OP SPEED.
a. Select FAST for fast movement or SLOW to use the normal speed.
b. Press <ENTER>.
Optics Speed
1. Select SETTINGS > PERFORM > BLACK D.
2. To black out the output when the head moves, press <ENTER>.
Head Motion Black Out
a. Select INSTANT to black out the output when the head tilts or pans, or
DELAY to keep the output on while the head moves.
b. Press <ENTER>.
1. Select SETTINGS > PERFORM > DIMMER.
2. To set the dimming curve, press <ENTER>.
a. Select DIM4 (slowest) to DIM1 (Fastest) or OFF (linear).
b. Accept the selected option.
Dimmer Curve
Loss Of Signal
1. Select SETTINGS > PERFORM > DMXERROR.
2. To choose what happens to the product when signal is lost, press <ENTER>.
a. Select BLACK to black out the output during signal loss or SAVE to keep the
last output when the signal was lost.
b. Press <ENTER>.
1. Select SETTINGS > PERFORM > DMXRESET.
Product Reset
2. To choose whether to reset the product from the control panel or the DMX controller,
press <ENTER>.
a. Select DMX to reset the product from a DMX controller or DISPLAY to reset
the product from the control panel.
b. Press <ENTER>.
1. Select SETTINGS > PERFORM > DISPLAY.
Display Backlight
2. To choose how long the backlight stays on after the last action is performed on the
control panel, press <ENTER>.
a. Select LONG, SHORT, or ALWAYS.
b. Press <ENTER>.
12
Q-Spot™ 460-LED User Manual Rev. 5
Download from Www.Somanuals.com. All Manuals Search And Download.
Operation
1. Select SETTINGS > PERFORM > KEY LOCK.
2. To choose activate the password function on the control panel, press <ENTER>.
Lockout
a. Select YES or NO.
b. Press <ENTER>.
1. Select SETTINGS > PERFORM > HOMEPAGE.
2. To choose what to show on the home screen on the control panel, press <ENTER>.
Homepage Setting
a. Select DMX, to show only the DMX Channel or NAME+DMX to display what
is programmed via the CONTENT level.
b. Press <ENTER>.
1. Select SETTINGS > RANGE.
Limit Pan/Tilt Range
2. To set the start and end points of the pan and tilt ranges, press <ENTER>.
a. Select P.START and set the pan starting point between 000~255.
b. Press <ENTER>.
c. Select P.END and set the pan ending point between 000~255.
d. Press <ENTER>.
e. Select T.START and set the tilt starting point between 000~255.
f. Press <ENTER>.
g. Select T.END and set the tilt ending point between 000~255.
h. Press <ENTER>.
1. Select SETTINGS > DEFAULT.
2. To reset the product to original factory settings, press <ENTER>.
a. Select YES or NO.
Product Defaulting
Program Send
b. Press <ENTER>.
1. Select SETTINGS > SEND.
2. To send all settings in the Q-Spot™ 460 LED to other Q-Spot™ 460 LED products
connected via Master/Slave, press <ENTER>.
a. Select YES or NO.
b. Press <ENTER>.
Run Mode Settings
1. Select RUNMODE > RUN.
Run Mode
2. To enable DMX mode:
a. Select DMX512, press <ENTER>.
3. To enable Auto modes:
a. Select AUTO1 or AUTO2, press <ENTER>.
4. To enable Sound-Active modes:
a. Select SOUND1 or SOUND2, press <ENTER>.
5. To enable Custom Program mode:
a. Select CUSTOM, press <ENTER>.
6. To enable Testing mode:
a. Select TEST, press <ENTER>.
7. To assign the product to Slave mode:
a. Select SLAVE, press <ENTER>.
Q-Spot™ 460-LED User Manual Rev. 5
13
Download from Www.Somanuals.com. All Manuals Search And Download.
Operation
Custom Programming
1. Select RUNMODE > EDIT > STEP.
2. Select 01~49, press <ENTER>.
a. Select PAN, press <ENTER>.
i. Set 000~255 to assign the Pan position.
b. Select TILT, press <ENTER>.
i. Set 000~255 to assign the Tilt position.
c. Select COLOR, press <ENTER>.
i. Set 000~255 to assign the Color Wheel value.
d. Select GOBO1, press <ENTER>.
i. Set 000~255 to assign the Gobo 1 Wheel value.
e. Select GOBO2, press <ENTER>.
i. Set 000~255 to assign the Gobo 2 Wheel value.
f. Select GOBO2ROT, press <ENTER>.
i. Set 000~255 to assign the Gobo 2 Rotation value.
g. Select PRI&ROT, press <ENTER>.
i. Set 000~255 to assign the Prism value.
h. Select FOCUS, press <ENTER>.
i. Set 000~255 to assign the Focus position.
i. Select DIMMER, press <ENTER>.
i. Set 000~255 to assign the Dimmer value.
j. Select STROBE, press <ENTER>.
i. Set 000~255 to assign the Strobe value.
k. Select TIME, press <ENTER>.
i. Set 000~255 to assign the Step duration.
l. Select USE, press <ENTER>.
i. Select YES to save the settings, NO to discard them.
1. Select RUNMODE > SEND.
Program Send
2. To send Run mode settings in the Q-Spot™ 460 LED to other Q-Spot™ 460 LED
products connected via Master/Slave, press <ENTER>.
a. Select YES or NO.
b. Press <ENTER>.
Manual Settings
1. Select MANUAL > RESET.
Reset Custom Settings
2. To reset the custom, press <ENTER>.
a. Select YES to turn the LCD around or NO to keep the normal LCD view.
b. Accept the selected option.
14
Q-Spot™ 460-LED User Manual Rev. 5
Download from Www.Somanuals.com. All Manuals Search And Download.
Operation
1. Select MANUAL > DMXvalue.
a. Select PAN, press <ENTER>.
Manual Control
i. Set 000~255 to assign the Pan position.
b. Select TILT, press <ENTER>.
i. Set 000~255 to assign the Tilt position.
c. Select COLOR, press <ENTER>.
i. Set 000~255 to assign the Color Wheel value.
d. Select GOBO1, press <ENTER>.
i. Set 000~255 to assign the Gobo 1 Wheel value.
e. Select GOBO2, press <ENTER>.
i. Set 000~255 to assign the Gobo 2 Wheel value.
f. Select GOBO2ROT, press <ENTER>.
i. Set 000~255 to assign the Gobo 2 Rotation value.
g. Select PRI&ROT, press <ENTER>.
i. Set 000~255 to assign the Prism value.
h. Select FOCUS, press <ENTER>.
i. Set 000~255 to assign the Focus position.
i. Select DIMMER, press <ENTER>.
i. Set 000~255 to assign the Dimmer value.
j. Select STROBE, press <ENTER>.
i. Set 000~255 to assign the Strobe value.
Service Menu
1. Select SERVICE > ACCESS > SETTLOCK.
2. To set the Settings Menu level lock-out, press <ENTER>.
a. Select YES to enable or NO to disable.
b. Press <ENTER>.
Settings Menu Lock-Out
1. Select SERVICE > ACCESS > SERVLOCK.
2. To set the Service Menu level lock-out, press <ENTER>.
a. Select YES to enable or NO to disable.
b. Press <ENTER>.
Service Menu Lock-Out
1. Select SERVICE > INFO > VERSION.
a. Press <ENTER>.
Software Version
Home Screen
1. Select SERVICE > CONTENT > DISPLAY1.
2. Use the <UP> and <DOWN> keys to select the first of 8 characters to show on the
home screen, press <ENTER>.
1. Select SERVICE > CONTENT > SEND.
Content Send
2. To send Content mode settings in the Q-Spot™ 460 LED to other Q-Spot™ 460
LED products connected via Master/Slave, press <ENTER>.
a. Select YES or NO.
b. Press <ENTER>.
Q-Spot™ 460-LED User Manual Rev. 5
15
Download from Www.Somanuals.com. All Manuals Search And Download.
Operation
Menu Map
Main Level
Programming Levels
Description
ADDRESS
001~512
PERSON 1
PERSON 2
Selects a starting DMX address
Selects the 14-channel DMX mode
Selects the 11-channel DMX mode
PERSON
FAST
SLOW
NORM
INVERT
NORM
INVERT
FAST
PT SPEED
PAN INV
Defines the pan/tilt speed
Defines the direction of pan function
Defines the direction of tilt function
Defines the optics speed
TILT INV
OP SPEED
BLACK D
SLOW
INSTANT
DELAY
DIM4
Defines the move-in black delay
DIM3
Slow (DIM4) to fast (DIM1) dimmer curves
DIMMER
DIM2
DIM1
OFF
Linear dimmer
PERFORM
NORM
INVERT
SAVE
DIM INV
Defines the direction of the dimmer function
Save the last look when DMX signal is lost
All LEDs off when DMX signal is lost
The DMX controller can reset the fixture
The control panel can reset the fixture
DMXERROR
DMXRESET
BLACK
DMX
SETTINGS
DISPLAY
LONG
SHORT
ALWAYS
YES
Defines the amount of time the display backlight
is on
DISPLAY
KEY LOCK
Activates the control panel password
NO
Sets the display to show only the DMX channel
when idle
DMX
HOMEPAGE
Display what is programmed via CONTENT level
when idle
NAME+DMX
P.START
P.END
Sets the pan start point (restricted range)
Sets the pan end point (restricted range)
Sets the tilt start point (restricted range)
Sets the tilt end point (restricted range)
RANGE
000~255
T.START
T.END
NO
YES
YES
DEFAULT
Sets unit back to default factory settings
Sends all settings of this product to all other Q-
Spot™ 460 LED products connected via
master/slave
SEND
NO
16
Q-Spot™ 460-LED User Manual Rev. 5
Download from Www.Somanuals.com. All Manuals Search And Download.
Operation
Menu Map (cont.)
Main Level
Programming Levels
DMX512
Description
Selects DMX512-A running mode
Selects the first automatic program
AUTO1
AUTO2
SOUND1
SOUND2
CUSTOM
TEST
Selects the second automatic program
Selects the first sound-activated program
Selects the second sound program
Selects the user-customizable program
Selects the fixture’s test sequence
Selects the Slave running mode
Selects the pan position
RUN
SLAVE
PAN
TILT
COLOR
GOBO1
GOBO2
GOBO2ROT
PRI&ROT
FOCUS
Selects the tilt position
Selects the color (color wheel)
Selects a fixed gobo (static or shake)
Selects a rotating gobo (static or shake)
Selects the gobo rotation mode
Selects the prism rotation mode
Selects a focus point
RUNMODE
000~
255
EDIT STEP 01~49
DIMMER
STROBE
TIME
Selects the dimmer value
Selects the strobe value
Selects the step duration
YES
NO
USE
Activates the changes
Sends RUNMODE settings of this product to all
other Q-Spot™ 460 LED products connected via
master/slave
NO
SEND
YES
NO
RESET
Resets the product’s custom settings
YES
PAN
TILT
Selects the pan position
Selects the tilt position
COLOR
GOBO1
Selects the color (color wheel)
Selects a fixed gobo (static or shake)
Selects a rotating gobo (static or shake)
Selects the gobo rotation mode
Selects the prism rotation mode
Selects a focus point
MANUAL
GOBO2
DMXvalue
000~255
GOBO2ROT
PRI&ROT
FOCUS
DIMMER
STROBE
Selects the dimmer value
Selects the strobe value
OFF
ON
Activates/deactivates the SETTINGS main level
passcode
SETTLOCK
SERVLOCK
ACCESS
OFF
ON
Activates/deactivates the SERVICE main level
passcode
SERVICE
INFO
VERSION
Shows the version of the installed software
Allows 8 characters of text to be displayed on the
control panel
DISPLAY1
SEND
********
CONTENT
NO
Sends CONTENT settings to all other Q-Spot™
460 LED products connected via master/slave
YES
Q-Spot™ 460-LED User Manual Rev. 5
17
Download from Www.Somanuals.com. All Manuals Search And Download.
Operation
DMX Values
Person 1
Channel
Function
Value
Percent/Setting
1
2
3
4
5
Pan
000 ó 255 0~540°
Pan Fine
Tilt
000 ó 255 Fine pan control 0~3°
000 ó 255 0~270°
Tilt Fine
Pan/Tilt Speed
000 ó 255 Fine tilt control 0~3°
000 ó 255 Fast to Slow
000 ó 009 No Function
010 ó 019 Red
020 ó 029 Green
030 ó 039 Yellow
040 ó 049 Blue
050 ó 059 Orange
060 ó 069 Magenta
070 ó 079 Light Blue
080 ó 099 Light Blue/Magenta
100 ó 119 Magenta/Orange
120 ó 139 Orange/Blue
140 ó 159 Blue/Yellow
160 ó 179 Yellow/Green
180 ó 199 Green/Red
200 ó 219 Red/Open
220 ó 255 Rainbow or Linear Effect
6
Color Wheel
000 ó 010 No gobo
011 ó 020 Gobo 1
021 ó 030 Gobo 2
031 ó 040 Gobo 3
041 ó 050 Gobo 4
051 ó 060 Gobo 5
061 ó 070 Gobo 6
071 ó 080 Gobo 7
7
Gobo Wheel 1
081 ó 095 Shaking gobo 7
096 ó 110 Shaking gobo 6
111 ó 125 Shaking gobo 5
126 ó 140 Shaking gobo 4
141 ó 155 Shaking gobo 3
156 ó 170 Shaking gobo 2
171 ó 185 Shaking gobo 1
186 ó 255 Flow effect
000 ó 010 No gobo
011 ó 020 Gobo 1
021 ó 030 Gobo 2
031 ó 040 Gobo 3
041 ó 050 Gobo 4
051 ó 060 Gobo 5
061 ó 070 Gobo 6
8
Gobo Wheel 2
071 ó 085 Shaking gobo 6
081 ó 100 Shaking gobo 5
096 ó 115 Shaking gobo 4
111 ó 130 Shaking gobo 3
126 ó 145 Shaking gobo 2
141 ó 160 Shaking gobo 1
156 ó 255 Flow effect
18
Q-Spot™ 460-LED User Manual Rev. 5
Download from Www.Somanuals.com. All Manuals Search And Download.
Operation
DMX Values (cont.)
Person 1
Channel
Function
Value
Percent/Setting
000 ó 060 360° Indexing
061 ó 150 Clockwise Rotation ~ Slow to Fast
151 ó 165 No Function
9
Gobo Wheel 2 Rotation
166 ó 255 Counter-Clockwise Rotation ~ Slow to Fast
000 ó 004 No Function
005 ó 009 No Rotation
10
Prism Rotation
010 ó 127 Counter-clockwise rotation ~ Slow to Fast
128 ó 132 No Rotation
133 ó 255 Clockwise rotate ~ Slow to Fast
11
12
Focus
000 ó 255 0~100%
000 ó 255 0~100%
Dimmer
000 ó 031 Close
032 ó 063 Open
064 ó 095 Strobe 0~20 Hz
096 ó 127 Open
128 ó 159 Pulse Effect
160 ó 191 Open
13
Strobe
192 ó 223 Random Effect
224 ó 255 Open
000 ó 019 No function
020 ó 039 Pan/tilt black activation
040 ó 059 Pan/tilt black deactivation
060 ó 139 No function
140 ó 149 Auto program 1 (3 sec activation delay)
150 ó 159 Auto program 2 (3 sec activation delay)
160 ó 169 Test (3 sec activation delay)
170 ó 179 Custom program (3 sec activation delay)
180 ó 189 Sound 1
14
Control
190 ó 199 Sound 2
200 ó 219 Reset (3 sec activation delay)
220 ó 235 Dim setting as set in product
236 ó 239 DIM0 (3 sec activation delay)
240 ó 243 DIM1 (3 sec activation delay)
244 ó 247 DIM2 (3 sec activation delay)
248 ó 251 DIM3 (3 sec activation delay)
252 ó 255 DIM4 (3 sec activation delay)
Q-Spot™ 460-LED User Manual Rev. 5
19
Download from Www.Somanuals.com. All Manuals Search And Download.
Operation
DMX Values (cont.)
Person 2
Channel
Function
Value
Percent/Setting
1
2
Pan
Tilt
000 ó 255 0~540°
000 ó 255 0~270°
000 ó 009 No Function
010 ó 019 Red
020 ó 029 Green
030 ó 039 Yellow
040 ó 049 Blue
050 ó 059 Orange
060 ó 069 Magenta
070 ó 079 Light Blue
080 ó 099 Light Blue/Magenta
100 ó 119 Magenta/Orange
120 ó 139 Orange/Blue
140 ó 159 Blue/Yellow
160 ó 179 Yellow/Green
180 ó 199 Green/Red
200 ó 219 Red/Open
3
Color Wheel
220 ó 255 Rainbow or Linear Effect
000 ó 010 No gobo
011 ó 020 Gobo 1
021 ó 030 Gobo 2
031 ó 040 Gobo 3
041 ó 050 Gobo 4
051 ó 060 Gobo 5
061 ó 070 Gobo 6
071 ó 080 Gobo 7
4
Gobo Wheel 1
081 ó 095 Shaking gobo 7
096 ó 110 Shaking gobo 6
111 ó 125 Shaking gobo 5
126 ó 140 Shaking gobo 4
141 ó 155 Shaking gobo 3
156 ó 170 Shaking gobo 2
171 ó 185 Shaking gobo 1
186 ó 255 Flow effect
000 ó 010 No gobo
011 ó 020 Gobo 1
021 ó 030 Gobo 2
031 ó 040 Gobo 3
041 ó 050 Gobo 4
051 ó 060 Gobo 5
061 ó 070 Gobo 6
5
Gobo Wheel 2
071 ó 085 Shaking gobo 6
081 ó 100 Shaking gobo 5
096 ó 115 Shaking gobo 4
111 ó 130 Shaking gobo 3
126 ó 145 Shaking gobo 2
141 ó 160 Shaking gobo 1
156 ó 255 Flow effect
20
Q-Spot™ 460-LED User Manual Rev. 5
Download from Www.Somanuals.com. All Manuals Search And Download.
Operation
DMX Values (cont.)
Person 2
Channel
Function
Value
Percent/Setting
000 ó 060 360° Indexing
061 ó 150 Clockwise Rotation ~ Slow to Fast
151 ó 165 No Function
6
Gobo Wheel 2 Rotation
166 ó 255 Counter-Clockwise Rotation ~ Slow to Fast
000 ó 004 No Function
005 ó 009 No Rotation
7
Prism Rotation
010 ó 127 Counter-Clockwise Rotation ~ Slow to Fast
128 ó 132 No Rotation
133 ó 255 Clockwise rotate ~ Slow to Fast
8
9
Focus
000 ó 255 0~100%
000 ó 255 0~100%
Dimmer
000 ó 031 Close
032 ó 063 Open
064 ó 095 Strobe 0~20 Hz
096 ó 127 Open
128 ó 159 Pulse Effect
160 ó 191 Open
10
Strobe
192 ó 223 Random Effect
224 ó 255 Open
000 ó 019 No function
020 ó 039 Pan/tilt black activation
040 ó 059 Pan/tilt black deactivation
060 ó 139 No function
140 ó 149 Auto program 1 (3 sec activation delay)
150 ó 159 Auto program 2 (3 sec activation delay)
160 ó 169 Test (3 sec activation delay)
170 ó 179 Custom program (3 sec activation delay)
180 ó 189 Sound 1
11
Control
190 ó 199 Sound 2
200 ó 219 Reset (3 sec activation delay)
220 ó 235 Dim setting as set in product
236 ó 239 DIM0 (3 sec activation delay)
240 ó 243 DIM1 (3 sec activation delay)
244 ó 247 DIM2 (3 sec activation delay)
248 ó 251 DIM3 (3 sec activation delay)
252 ó 255 DIM4 (3 sec activation delay)
Q-Spot™ 460-LED User Manual Rev. 5
21
Download from Www.Somanuals.com. All Manuals Search And Download.
Technical Information
5. Technical Information
To maintain optimum performance and minimize wear, you should clean this product
frequently. Usage and environment are contributing factors in determining the cleaning
frequency.
As a rule, clean this product at least twice a month. Dust build-up reduces light output
performance and can cause overheating. This can lead to reduced light source life and
increased mechanical wear.
Product
Maintenance
To clean your product:
·
·
·
Unplug the product from power.
Wait until the product has cooled.
Use a vacuum (or dry compressed air) and a soft brush to remove dust collected on
the external vents and accessible internal components.
Clean all external optics and glass/plastic surfaces with a mild solution of non-
ammonia glass cleaner or isopropyl alcohol.
·
·
·
·
Apply the solution directly to a soft, lint-free cotton cloth or a lens cleaning tissue.
Wipe any dirt or grime to the outside edges of the lens, glass, or plastic surface.
Gently polish the lenses until they are free of haze and lint.
Always dry the external optics, glass, and plastic surfaces thoroughly after
cleaning them.
Refrain from spinning this product’s fans using compressed air.
The user must send the merchandise prepaid, in the original box, and with its original
packing and accessories. CHAUVET® will not issue call tags.
Returns
Call CHAUVET® and request a Return Merchandise Authorization (RMA) number before
shipping the product. Be prepared to provide the model number, serial number, and a
brief description of the cause(s) for the return.
The user must clearly label the package with an RMA number. CHAUVET® will refuse
any product returned without an RMA number.
DO NOT write the RMA number directly on the box. Instead, write it on a properly
affixed label.
Once you have received the RMA number please include the following information on a
piece of paper inside the box:
·
·
·
·
·
Your name
Your address
Your phone number
The RMA number
A brief description of the problem(s)
Be sure to pack the product properly. Any shipping damage resulting from inadequate
packaging will be the customer’s responsibility. Proper FedEx packing or double-boxing
are recommended packaging methods.
CHAUVET® reserves the right to use its own discretion to repair or replace
returned product(s).
22
Q-Spot™ 460-LED User Manual Rev. 5
Download from Www.Somanuals.com. All Manuals Search And Download.
Technical Specifications
6. Technical Specifications
Dimensions and
Weight
Length
Width
Height
Weight
14.2 in (360 mm)
10.6 in (270 mm)
20.5 in (520 mm)
26.5 lbs (12 kg)
Note: Dimensions in inches rounded to the nearest decimal digit.
Electrical
Power Supply Type
Range
Voltage Selection
Switching (internal)
100~240 V, 50/60 Hz
Auto-ranging
Parameter
120 V, 60 Hz
208 V 60 Hz
230 V, 50 Hz
Consumption
Operating
196 W
1.78 A
7
198 W
1.00 A
13
202 W
.920 A
Power Linking Maximum
Fuse/Breaker
14
T 3.15 A, 250 V
T 3.15 A, 250 V
T 3.15 A, 250 V
Power I/O
U.S./Worldwide
Europe
Power input connector
Power output connector
Power cord plug
Neutrik® powerCON® A
Neutrik® powerCON® B
Edison (U.S.)
Neutrik® powerCON® A
Neutrik® powerCON® B
Local plug
Gobo Sizes
Gobo Wheel 2
Gobo Dimensions
Outside
Image
32.7 mm
27.5 mm
1.45 mm
Thickness
Light Source
Type
Power
Lifespan
LED
10 W
50,000 hours
Color
Quantity
Current
White
7
3 A
Photo Optic
Parameter
Standard Optics
Illuminance @ 5 m
Beam angle
2240 lx
16º
Thermal
DMX
Max. External Temperature
Cooling System
104° F (40° C)
Fan Assisted Convection
I/O Connectors
Connector Type
Channel Range
3- and 5-pin XLR
Sockets
11,14
Ordering
Product Name
Item Code
UPC Number
Q-Spot™ 460-LED
01010565
781462209131
Q-Spot™ 460-LED User Manual Rev. 5
-23-
Download from Www.Somanuals.com. All Manuals Search And Download.
World Headquarters
CHAUVET®
United Kingdom and Ireland
CHAUVET® Europe Ltd.
Contact Us
General Information
General Information
Address:
5200 NW 108th Avenue
Sunrise, FL 33351
(954) 929-1115
Address:
Unit 1C
Brookhill Road Industrial Estate
Pinxton, Nottingham, UK
NG16 6NT
Voice:
Fax:
(954) 929-5560
Toll free:
(800) 762-1084
Voice:
Fax:
+44 (0)1773 511115
+44 (0)1773 511110
Technical Support
(954) 929-1115 (Press 4)
(954) 756-8015
Technical Support
Voice:
Fax:
Email:
Email:
World Wide Web
World Wide Web
Download from Www.Somanuals.com. All Manuals Search And Download.
|