Specifications: typical @ 25OC 5OC
SVC-10 Distribution System
Video
nominal level
1.0 Vp-p
impedance
75
3dB bandwidth (worst case 1000ft)
nominal level
10MHz
Digital audio
Analog audio
Power supply
0.5 Vp-p
PERFORMANCE MULTI-ROOM VIDEO
impedance
75
3dB bandwidth (worst case 1000ft)
nominal level
15MHz
1Vrms
Installation Manual
&
Users Guide
impedance
10K nominal
20Hz-20KHz
15VDC
3dB bandwidth (worst case 1000ft)
output voltage
input power
105-125VAC
5 watts typical
5 watts typical
1.75” X 17.0” X 6.5”
1.0” X 4.6” X 3.2”
2 lbs 10 oz
9.6 oz
power consumption (transmitter)
power consumption (receiver)
transmitter size (h X w X d)
receiver size (h X w X d)
transmitter weight
Physical
SVC-10
power s-video video digital
IR
receiver weight
operating temperature
storage temperature
humidity
0OC to 50OC
-30OC to 70OC
5% to 90% (non-condensing)
Environmental
CAT-5
Point to Point
Video Distribution System
Warranty
Multiplex Technology, Inc. warrants this product to be free from defects in
materials and workmanship for a period of one year from the date of
purchase or MTI will repair, or at its option, replace the defective product.
To obtain warranty service, call MTI for a return material authorization
(RMA) number and return the product prepaid to Multiplex Technology,
Inc., 3001 Enterprise Street, Brea, CA 92821, Attention: Customer
Service. Please put the RMA number on the outside of the carton.
Model
SVC-10
This device complies with the FCC's Part 15 Rules for TV
interface devices. Any change or modification to this device
without the permission of Multiplex Technology, Inc. may
void the user's authority to operate this equipment.
Any implied warranty arising from the sale of the product including implied
warranties of merchantability and fitness for purpose are limited to the
warranty stated above. MTI shall not be responsible for losses or damages
or expenses, whether direct, consequential or incidental arising from the
use of or the inability to use this product. Some states do not allow
limitations on how long the implied warranty lasts or the exclusion or
limitation or incidental or consequential damages, so the above limitations
and exclusions may not apply to you. This warranty gives you specific legal
rights, and you may have other rights which may vary from state to state.
3001 Enterprise Street, Brea, CA 92821-6213, U.S.A.
Multiplex Technology, Inc., Brea, CA 92821
600-227 Rev. B
Download from Www.Somanuals.com. All Manuals Search And Download.
Sample System Diagram 3:
Transmitting S-video and DTS from a DVD
600 feet with IR
FEATURES
EASY WIRING
The SVC-10 transmitter and receiver communicate over a single
run of CAT-5 wire. A back panel control is on the transmitter to
allow compensation for any length of wire up to 1000 feet. Wire
RJ-45 connections according to TIA T568A standard.
400
600
Connect a local monitor here
Connect a local receiver here
200
800
Set LENGTH ADJUST to 600
0
1000
FLEXIBLE VIDEO INPUT
Choose between s-video input or composite video. The SVC-10
has its own connector for each - no need for a converter plug.
PCM/AC3/DTS
LENGTH
ADJUST
(in feet)
400 600
CAT-5
IR REPEATERS
POWER
15VDC
300mA
200
800
1000
0
LEFT
RIGHT
COAX
OPAL VIDEO
S-O
UNIVERSAL AUDIO
350-103 power
supply (included)
2171
The SVC-10 accepts either left&right analog audio or digital
audio. It can handle either coax or fiber optic (TOSLINK) digital
audio. When using the fiber optic cable, the SVC-10 converts
this signal and puts it on the coax digital loop out connector.
When using analog audio, the SVC-10 will maintain Dolby Pro-
logic® encoding if present.
Digital
audio
s-video
LOOP OUT CONNECTORS
All SVC-10 connectors have built in loop through connectors for
a second device such as a local monitor.
DVD
Attach the IR emitter
directly over the IR
sensor.
ACTIVE TERMINATE FEATURE
600 feet CAT-5
The SVC-10 terminates the inputs into a 75 ohm load. When a
second cable is connected to the output, the SVC-10
automatically disconnects this termination to allow the second
device to provide the termination.
IR CONTROL
350-103 power
supply (included)
Standard 12 volt ChannelPlus IR targets and emitters can be
used with the SVC-10 to allow control of the source from the
remote location.
AUDIO AUDIO CX
LEFT
POER
VIDEO S-VEO
RIGHT DIGITAL
CAT-5 IR IUT
MOUNTING
The SVC-10 can be mounted in standard 19” racks by attaching
the included mounting ears. Remove the rubber feet on the
bottom of the unit to ensure clearance when inserted into a rack.
2132
TV
Digital
Surround Sound
Processor
6
3
Download from Www.Somanuals.com. All Manuals Search And Download.
Sample System Diagram 1:
Transmitting video and analog audio from a DVD
800 feet
Sample System Diagram 2:
Transmitting composite video and analog audio
from a VCR 350 feet with IR
400
600
400
600
Connect a local monitor here
Connect a local receiver here
Connect a local monitor here
Connect a local receiver here
200
800
200
800
Set LENGTH ADJUST to 800
Set LENGTH ADJUST to 350
0
1000
0
1000
PCM/AC3/DTS
PCM/AC3/DTS
LENGTH
ADJUST
(in feet)
400 600
LENGTH
ADJUST
(in feet)
400 600
CAT-5
CAT-5
IR REPEATERS
IR REPEATERS
POWER
15VDC
300mA
POWER
15VDC
300mA
200
800
1000
200
800
1000
0
0
RT
COAX
OPTICAL VIO
S-VIDEO
RT
COAX
OPTICAL VI
S-VIDEO
350-103 power
supply (included)
350-103 power
supply (included)
2171
Right
audio
Composite
video
Left
audio
Wiring Modular Plug
(T568A)
Insert wires in this order:
Brown
DVD
VCR
Attach the IR emitter
directly over the IR
sensor.
White/Brown
Orange
White/Blue
Blue
800 feet CAT-5
White/Orange
Do not untwist
Green
more than 0.5"
White/Green
350 feet CAT-5
350-103 power
supply (included)
AIO AO COAX
RIGHT DIGITAL
AUIO AO COAX
LEFT
POER
VS-VIDEO
CAT-5 IR INPUT
POER
VIS-VIDEO
RIGHT DIGITAL
CAT-5 IR IUT
LEFT
350-103 power
supply (included)
video
Stereo
TV
right
audio
2132
left
audio
TV
Pro-logic
Surround Sound
Processor
5
4
Download from Www.Somanuals.com. All Manuals Search And Download.
|