Digital Camera Specifications
Image sensor
2.0 Mega pixels, CMOS sensor
Lens
300mm(8X)
Field of View
Image Resolution
(Still Image)
7 -8
HI -2048x1536 (3.1)
MI -1600x1200 (2.0)
LO -640x480 (0.3)
320x240, 12 Fps AVI format
HI 36 P
Video Resolution
Image Capacity
MI 46 P
LO 250 P
(*Upon 16MB Flash Memory)
MPEG format
Image Type
Video measure
Digital Zoom
Exposure
6~8 min
4 X
Auto / Manual Mode
Auto
White Balance
Memory
Built-in 16MB Flash Memory
SD/MMC card socket expandable
0 / 105
LCD open angle
Language select
Interface
English
USB 1.1
TV-out
NTSC / PAL
Power Source
1.5V AAA alkaline battery x 4
Binocular specifications
Size
8 x 32 mm
Field of View
Field of View5.6°Field of view :
92.7m(304 ft) at 914m(1000 YDS)
4.0 mm
Exit pupil
Close Focusing
Eye Relief
Coatings
3.5 m
12.5 mm
Multi coating on the first surface.
Single layer for other surface, fully coated.
8x32
Package Contents
Binocular & Digital Camera
USB Cable
User Guide
Video Cable
Software CD
Pouch
x 1
x 1
x 1
x 1
x1
Model #72212
Binocular Dimensions 156mm x 102mm x 60mm(LCD Close)
System Requirements:
5. CD-ROM
6. USB port
7. 600MB of free hard
disk space.
1. Window 98/ 98SE/ ME/ 2000/ XP
2. The processor above Pentium 233MHz
3. 128MB SDRAM
4. Video(VGA) card with 2MB of RAM for
minimum 16-bit (High Color) display.
U.S. Patent No. 6,088,053. Other patentspending
Download from Www.Somanuals.com. All Manuals Search And Download.
Cautions
Cautions
Viewing (Movie) recorded images on PC
1. Use theUSB cable toconnect the USBport from PCto VistaPix.After
connection the "PC"display on LCD.
Never immerse VistaPixinto any fluidor liquid.
Remove dust orstains with asoft cloth dampenedwith water orneutral
detergent. Keep ina dry andcool dust-free environmentor a container
when it isnot used.
2. Double click "MY COMPUTER"
on the PC'sdesktop.
3. Double click "Removable Device".
Take the batteries outwhen VistaPix isnot to beused over along period.
Avoid dropping theVistaPix. Do notdisassemble VistaPix.
Warning:
Avoid using undercombustibility gas environment.
Do not look at the sun with the Binocular, which will damage the eyes
even lead to blindness.
Please take care when using the hanging tape, and do not let children
twist it around their necks and bodies to avoid danger due to improper
operation.
Please don't throw the product with the gallus in hand to avoid damage
to others or malfunction of the product.
Keep the product away from babies to prevent them from putting the
batteries or silica gels into their mouths, which causes danger.
4. Open \DCIM\100scope\
5. Select thevideo file (*.AVI) and
double click it, the images video
will play through"Windows Media
Player" software orother software.
Usage of thebattery
Please always use Alkaline Battery (AAA Alkaline Battery)
Please take out the batteries and keep them separately with the product
if you'll not use the product for a long time.
About usage
Do Not placethe product underthe following environmentsto avoid any
damage.
o
1.Places in temperaturehigher that 70C
2.Damp or dustyplaces
3.Places with strongelectromagnetic field.
In order touse Windows MediaPlayer to viewthe videoAVI filetaken with
your VistaPix, thecomputer viewing theAVIfile needs tobe running
Microsoft DirectX version8.0a or later. If youexperience problems viewing
AVI filesfrom Media Playeryou can upgradeDirectX to themost current
version by goingto the MicrosoftDirectX Web Pageat:
Please do not disassemble or repairthe product toavoid malfunction.
Please do not drop the productto the groundto avoid malfunction.
Follow the downloadinstructions given onthe web site. The download isfree.
P.18
Download from Www.Somanuals.com. All Manuals Search And Download.
Steps to download image file
1.To execute Photo Manager.
Select the buttons as indicated.
2.Enter " Removable Disk " to open
"DCIM" file.
1
2
3
Contents
4
1.Introduction......................................................P.1
2.Notice to user.....................................................................P.2
3.Product Identification.........................................................P.3
4.Memory & Image Download.............................................P.4
5.Using the camera........................................................P.5
6.How to use the binocular.............................................P.10
7.System requirements............................................P.11
8.Basic maintenance..........................................................P.12
9.Steps to install VistaPix driver.........................................P.13
10.Steps to install Photo Manager....................................P.15
11.Steps to download image file........................................P.17
12.Viewing ( Movie ) recorded images on PC...............P.18
13.Steps to view TV images..............................................P.19
3.In " DCIM " file, open"100MEDIA "
data file.
4.In " 100MEDIA " Data file, choose the
pictures you want or choose all Images.
5
7
6
8
How To Use the PhotoManager
Select the buttons as indicated. "Help" will give you
detailed information on Photo Manager's many
features. To learn more about Photo Mangaer you
can click on the Icon (3) in the lower left side of the
screen to directly to the PhotoManager web site
5.Images download finished.
1
2
3
P.17
Download from Www.Somanuals.com. All Manuals Search And Download.
Steps to install Photo Manager
8. Choose "Custom" or "Typical"
form of installation.
9.Please confirm the file location
1.Introduction
VistaPix is a binocular integrated with a digital camera that is great
for sporting events, concerts and wildlife activities such as hunting or
bird-watching. VistaPix lets you record memories and sights at the
touch of abutton. Use the full-featured binocular for closer views and
capture images to take home with you at the same time.
VistaPix makes it possible to share your fun with others by
downloading images from the camera right to your computer
to e-mail to your friends and family.
10. Begin installing software
11.Software installation finished,
please press "Finish"for
confirmation
Battery installation manner
1. Hold tight the bottom of battery cover, and lift to open.
2. Install four AAA batteries into the battery compartment as shown below.
2
After installing VistaPix driver & software. Please restart your computer.
1
P.16
P.1
Download from Www.Somanuals.com. All Manuals Search And Download.
Steps to install Photo Manager
1. Insert the CD ROM
3.Choose the language and press
confirm button
2. Select "Install Thalia Photo Manager"
2.Notice to User
WARNING !
Ne ve r us e a Vis t a Pix t o l ook a t t he s un !
Looking at or near the sun will cause instant and irreversible damage
to your eye. Eye damage is often painless, so there is no warning to
the observer that damage has occurred until it is too late. Do not
point the binocular at or near the sun.
Children should always have adult supervision while observing.
4.Enter installing screen
5.After confirming, please press
"Next" button
2-1. When noaction is performedwith your binocular, the VistaPixwill
automatically turn offafter 90 seconds.
2-2. The VistaPix has abattery level displayin the right lower corner of
the LCD. Whenthe battery islow you willhear a long"beep". If no
action is taken, VistaPix willautomatically turn-off after10 seconds.
2-3. Please usealkaline battery forthis product.
2-4. VistaPix comeswith a SDcard slot thatenables you toexpand the
memory. To install an optionalSD card:
Open the coverof the SDcard slot andinstall the card(with the
gold strips facingup) into theSD card slot(7) until itclicks into the
position.
7.The serial number is located on the
front of the CD.Press "Next" when
complete
6.After confirming, please press "Yes"
SD card lidclosed
SD card lidopened
Foil face up
P. 2
P.15
Download from Www.Somanuals.com. All Manuals Search And Download.
Steps to install VistaPix driver
3. Product Identification
5. Computer willautomatically install
the driver.
13
3
1
1. Diopter Knob(on underside)
2. Center Focus Knob
3. Objective Lens
9
5
6
4
7
8
11
10
2
6. If yousee the "Microsoftdigital sign"
request appear onscreen as you
are installing thedriver , pleasepress
"Yes" button to continueinstalling.
4. Power/Menu Button
5. Shutter/OK Button
6.Movie/Delete Button
7. USB Port/SD card slot
8.TV out port
3
9
13
11
7. Installation complete. Please press
"Finish" button.
9. Eyepiece
10. Camera Lens
11. LCD Screen
12. Battery Compartment Lid
13. Barrel
12
After installing VistaPix driver. Please restart your computer.
P.14
P.3
Download from Www.Somanuals.com. All Manuals Search And Download.
Memory & Image Download
Steps to install VistaPix driver
1.Before you installthe driver, please make surethat your VistaPixis not
connected to thecomputer.
Using SD memorycard
The VistaPix hasbuilt in flashmemory, sowhen you takeimages, the
images will besaved into theflash memory insideyour VistaPix until
the memory is full.
2.If you have windows ME/ 2000/ XPoperation system installed in your computer,
you should not need to install the VistaPix driver. Simply view andsave images
through your My Computer icon.
Whenever you insertan optional SDmemory card totake images, the
images taken with theSD card andflash memory arestored separately.
So when downloading theimages, the internalflash memory andthe
card memory must bedownloaded separately.
1. Insert theCD included withyour
VistaPix.
Download images
When downloading the photos, the internal memory and the card memory
must be downloaded separately.
2. Click themouse on "Installation
Driver" to begininstallation.
Download from flashmemory
Take out the SDcard (if necessary)and connect theto the computer,
then follow thedownloading steps andall the photos in the flash
memory can bedownloaded.
3. Begin "InstallShieldWizard"
and your computerwill
Download from OptionalSD card
Insert the SDcard and connectthe to thecomputer, thenfollow the
downloading steps andall the photosin the SDcard memory canbe
downloaded.
automatically execute the
installation of driverprogram.
(Once the SDcard memory isfull, you canremove the cardand continue
to use the VistaPix untilthe internal memoryis full as well).
4. Follow the"InstallShield Wizard"
steps to guideyou through the
driver installation.
Click on "Next"when complete.
P. 4
P.13
Download from Www.Somanuals.com. All Manuals Search And Download.
4.Using the Camera
7.Basic maintenance
Operating Environment: 41o to104 oF(5o to 40o C). 20%-85% relative
humidity,non-condensing.
Use this product under good lighting conditions, avoid facing light source
directly. Rememberto keep a distance of at least 49 feet (15 meters) away
from the target when taking a photo. As you press the "Shutter/Set" button,
hold the binocular very steady until you hear a "Beep" sound. If the binocular
is unsteady,the camera will not focus well and blurred images will result.
Care of your VistaPix
7 -1.Never immerseVistaPix into anyfluid or liquid. Remove dust orstains
4-1 Turnon the powerby pressing
buttonfor 3 secondsand you willhear
two beep sounds. The monitor willdisplay picture numberand resolution.
Press again topower off.
4-2 Press Up-downbutton
up to 32xas seen onthe LCD display.
4-3 Press theShutter button
you hear abeep sound.
with a softcloth dampened withwater or neutraldetergent. Keep ina dry
and cool dust-freeenvironment when notin use.
7 -2.Take the batteriesout when VistaPixis not tobe used overa long
period.
to zoomin and out. It can magnifythe image
totake pictures. Shootingis completed when
anda beep soundwill signal thatrecording
4-4 Press theMovie button
7 -3. Avoid dropping theVistaPix. Do notdisassemble VistaPix.
has begun. Thegreen power indicatorlight will blinkwhile recording isin
progress. Press theMovie button
againto stop recording.
Function
Button
NO INDICATORS
5
ITEMS
1
2
3
4
5
Power /menu
Movie /delete
Shutter /OK
3
2
1
Zoom in/ up
Zoom out/ down
4
1
Monitor
NO INDICATORS
ITEMS
Number of Images Remaining
3
1
2
4
5
Image resolution
0.3MP,
2.0MP,
3.0MP
3
4
5
6
7
Movie mode
SD cardmode
Autoshooting mode
Battery level
2
6
7
Memory gauge
P.12
P.5
Download from Www.Somanuals.com. All Manuals Search And Download.
(Play back mode)
Press the Menubutton , select"Play Back" andpress OK button. Use
6.System requirements
6-1.Windows 98SE / 2000/ ME / XP
6-2.Pentium 233MHz or higher
6-3.128MB SDRAM
Up-Down button
toselect the pictures, press OK button
to display
the picture infull screen. Pressthe Shutter button again to returnto a menu
of nine thumbnailimages.
MEMU
6-4.Video(VGA) Card with 2MBof RAM for minimum16-bit(High Color)display.
6-5.CD-ROM
Play back
Auto shhutter
Setting
6-6.USB port
Power off
6-7.600MB of free harddisk space.
Erasing Pictures
Press the deletebutton
is displayed. Select"Erase one" andpress OK Button
frame. Select "Eraseall" and pressOK button
while thethumbnail menu orfull-screen image
to erase asingle
toerase all frames.
Installation of driver
ERASE
ONE ERASE
Yes
No
ERASE
ERASE ALL
Yes
No
One erase
Erase all
One erase
Erase all
Since VistaPix is a Mass Storage Deviceyou can access captured images just as
if it were a hard drive, therefore nosoftware driver is needed (See Mass Storage
Mode ).If using VistaPix with an olderversion of Windows 98SE it may be
necessary to install the software Driver.
Auto shutter mode(Timer)
Press the Menubutton and select"Auto Shutter". Pressthe OK button
again to takean image automaticallyafter 10 seconds.
MEMU
A
B
Play back
Auto shhutter
Setting
Power off
PC with USB port
VistaPix
(Setting mode)
Press the Menubutton
to enter themenu.
and select"Setting". Press theOK button again
MEMU
Play back
Auto shhutter
Setting
Power off
P. 6
P.11
Download from Www.Somanuals.com. All Manuals Search And Download.
5. How to use the binocular
To adjust the eye-relieffor eyeglass wearers:Fold down therubber eyecups
and place themagainst your glassesto get thebest viewing result.
Resolution Adjustment
Select "Resolution" and press OK Button.
Choose the desired resolution
and press OK button
to change the image resolution. Indicates 0.3MP,
indicates 2.0MP, and
indicates 3.0MP on theLCD screen.
SETUP
RESOLLUTLON
Resollution
Exposurre value
Date//Time
TV out
3.0M
2.0M
0.3M
Time sstamp
Exposure Value
Select "Exposure value" and press the OK button.
the exposure setting suggested by the camera. Press the Up or Down button
to select a value between -1.5 and 1.5 and press OK button to accept the
Thisallows you to change
exposure value. Negative exposure values tend to underexpose (darken) your
object while positive values will overexpose (brighten) the object.
SETUP
EV
EV
Resollution
Exposurre value
Date//Time
TV out
0.0
0.6
Adjusting the eyepieces
The distance between your eyes is called interpupillary distance.
The interpupillary distance is different from oneperson to another.
It is important to adjust your interpupillary distancebefore using the VistaPix:
- Hold VistaPix firmly in the normalviewing position.
- Adjust the barrels bypushing together or pulling apart until you see a single
circular image with both of your eyes.
Time sstamp
Setup the Date
Select "Date / Time" and press the OK button
the correct date (y/m/d) and time (h/m/s) by pressing the Up-down button.
Press the OK button again to complete the setting.
to set the internal clock. Edit
SETUP
Date/Time
2004 01 31
24:00:01
Resollution
Exposurre value
Date//Time
TV out
Focusing the Binocular
A. Set the Diopter Knob on undersideof VistaPix to its center pointbetween
- and + .
Time sstamp
B. Choose an object that is atleast 15 meters (49 ft) away.
C. Looking with just your left eye, rotatethe Center Focus Knob(2) until the object
you are viewing is in best focus.
D. Looking with just your right eye,rotate the Diopter Knob(1) until the objectyou
are viewing is in best focus.
TV-out Display Mode
Select "TV out" and press OK button.
(NTSC for United States or PAL for Europe) and press OK button
complete setting.
Choose the corresponding output
to
E. Viewing your object with both eyes,turn the Center Focus Knob to bringit in
best focus.
SETUP
TV OUT
NTSC
PAL
Resollution
Exposurre value
Date//Time
TV out
Time sstamp
P.10
P.7
Download from Www.Somanuals.com. All Manuals Search And Download.
Time stamp onphoto
Select "Time stamp" from setting menu,press OK button
Reset
,select ON to
Select "Reset" fromsetting menu, pressOK button
tomake the selection.
display time on photo.OFF to skip time on photo.Press OK button
complete the setting.
again to
Select "Yes" to returnthe original factorysetting. Select "No"to retain the
current settings. PressOK button tocomplete the set-up.
SETUP
Time sstamp
ON
OFF
SETUP
Beep
Auto poower OFF
Format
Reset
Reset ssetting
Yes
No
Resollution
Exposurre value
Date//Time
TV out
Time sstamp
Beep Sound
Select "Beep" from setting menu. Press OK button
beep sound.OFF to turn off thebeep sound.Press OK button
the setting.
Power Off mode
Press menu button
off.
,select ON to turn on the
and select "Power off". Press OKbutton.
to power
to complete
SETUP
Beep
Auto poower OFF
Format
Reset
Beep SSound
ON
OFF
MEMU
Play back
Auto shhutter
Setting
Power off
Auto power
Auto power allows you to selectthe duration oftime that yourVistaPix can
be inactive beforeit automatically poweritself down. Select"Auto power OFF"
from setting menu, press OK button.
inactivity shutdown. PressOK button
Select the indicatedtime of autopower
againto complete theset-up.
SETUP
Auto poower OFF
Beep
Auto poower OFF
Format
90 secconds
3minutes
5minutes
10minnutes
15minnutes
Reset
Formatting
Select "Format" and press OK button. When you choose "Yes" and press
Shutter button ,a confirmation screen is displayed. Press OK button
to start formatting the internal memory. Warning all stored image will be
erased after formatting is complete.
SETUP
Beep
Auto poower OFF
Format
Reset
FORMAT
Yes
No
Reformat
Do not poower off
Yes
No
P.8
P. 9
Download from Www.Somanuals.com. All Manuals Search And Download.
|