Casio Watch MA0610 EA User Manual

MA0610-EA  
Operation Guide 4762  
About This Manual  
Button operations are indicated using the letters shown  
in the illustration.  
For the sake of simplicity, the sample displays in this  
manual do not show the analog hands of the watch.  
Each section of this manual provides you with the  
information you need to perform operations in each  
mode. Further details and technical information can be  
found in the “Reference” section.  
Depending on the model of your watch, display text  
appears either as dark figures on a light background or  
light figures on a dark background.  
All sample displays in this manual are shown using dark  
figures on a light background.  
For indicators, “On” is indicated by a dark indicator on  
the positive (dark-on-light) display, and by a light  
indicator on the negative (light-on-dark) display.  
[Positive]  
[Negative]  
General Guide  
Press C to change from mode to mode.  
In any mode (except when a setting screen is on the display), press B to illuminate  
the display.  
Timekeeping Mode  
World Time Mode  
Countdown Timer Mode  
Stopwatch Mode  
Alarm Mode  
Hand Setting Mode  
Press  
.
4. When the setting you want to change is flashing, use B and D to change it as  
described below.  
Timekeeping  
This watch features separate digital and analog timekeeping. The procedures for  
setting the digital time and analog time are different.  
In the Timekeeping Mode, you can press D to change the display format as shown  
below.  
Screen  
To do this:  
Do this:  
00  
Reset the seconds to  
ON  
Toggle between Daylight Saving Time ( ) and Press D.  
Standard Time (  
Press D.  
OF  
)
Day of the Week  
Month – Day  
Hour : Minutes  
Change the Home City code  
Change the hour or minutes  
Use D (east) and B (west).  
Use D (+) and B ().  
Seconds  
PM indicator  
Press  
.
Toggle between 12-hour (12H) and 24-hour  
(24H) timekeeping  
Press D.  
Change the year  
Use D (+) and B ().  
Change the month or day  
Day of week  
Month – Day  
Hour : Minutes  
Select one second ( ) or three seconds (  
as the illumination duration  
)
Press D.  
5. Press A to exit the setting screen.  
Resetting the seconds only (without changing the DST, Home City code, hour, or  
minute setting) causes the analog minute hand setting to be adjusted automatically.  
See Digital Time Daylight Saving Time (DST) Settingbelow for details about the  
DST setting.  
The 12-hour/24-hour timekeeping format you select in the Timekeeping Mode is  
applied in all modes.  
Digital Time and Date  
Use the Timekeeping Mode to set and view a digital display of the current time and date.  
When setting the digital time, you can also configure settings for summer time  
(Daylight Saving Time or DST), your Home City code (the code for the city where you  
normally use the watch), the 12/24-hour format, and the illumination duration.  
This watch is preset with a number of city codes, each of which represents the time  
zone where that city is located. When setting the digital time, it is important that you  
select the correct city code for your Home City. If your location is not included in the  
preset city codes, select the preset city code that is in the same time zone as your  
location.  
For details about illumination duration, see Illumination.  
Digital Time Daylight Saving Time (DST) Setting  
Daylight Saving Time (summer time) advances the digital time setting by one hour  
from Standard Time. Remember that not all countries or even local areas use Daylight  
Saving Time.  
Note that all of the times for the World Time Mode city codes are displayed in  
accordance with the digital time and date settings you configure in the Timekeeping  
Mode.  
After you correctly set your Home City time and date, you can set the watch up for  
timekeeping with a different city code simply by changing the Home City code in the  
Timekeeping Mode.  
To toggle the Timekeeping Mode digital time between DST and Standard Time  
1. In the Timekeeping Mode, hold down A until the seconds  
DST indicator  
start to flash, which indicates the setting screen.  
2. Press C once to display the DST setting screen.  
ON  
3. Press D to toggle between Daylight Saving Time (  
OF  
displayed) and Standard Time (  
displayed).  
4. Press A to exit the setting screen.  
To set the digital time and date  
The DST indicator appears on the Timekeeping, Alarm,  
and Hand Setting Mode to indicate that Daylight Saving  
Time is turned on.  
1. In the Timekeeping Mode, hold down A until the  
seconds start to flash, which indicates the setting  
screen.  
2. Press C twice to move the flashing to the Home City  
code setting (see the illustration below), and then use  
B and D to select the code you want.  
Make sure you select your Home City code before  
changing any other setting.  
Setting the Analog Time  
Perform the procedure below when the time indicated by the analog hands does not  
match the time of the digital display.  
For full information on city codes, see the City Code  
Table.  
3. Press C to move the flashing in the sequence shown below to select the other settings.  
Seconds  
DST  
Home City Code  
Hour  
Minutes  
Illumination Duration  
Day  
Month  
Year  
12/24-Hour Format  
1
Download from Www.Somanuals.com. All Manuals Search And Download.  
Operation Guide 4762  
To set an alarm time  
About the Auto Light Switch  
While the auto light switch is enabled, illumination turns on for about one second or  
three seconds, whenever you position your wrist as described below in any mode.  
1. In the Alarm Mode, use D to scroll through the alarm  
screens until the one whose time you want to set is  
displayed.  
Moving the watch to a position that is parallel to the ground and then tilting it  
towards you more than 40 degrees causes illumination to turn on.  
Wear the watch on the outside of your wrist.  
To set a one-time alarm, display one of the screens indicated by an alarm number  
from AL1through AL4. To set the snooze alarm, display the screen indicated  
by SNZ.  
Parallel to ground  
More than 40°  
The snooze alarm repeats every five minutes.  
2. After you select an alarm, hold down A until the hour setting of the alarm time  
starts to flash, which indicates the setting screen.  
This operation automatically turns on the alarm.  
3. Press C to move the flashing between the hour and minute settings.  
4. While a setting is flashing, use D (+) and B () to change it.  
When setting the alarm time using the 12-hour format, take care to set the  
time correctly as a.m. (no indicator) or p.m. (PM indicator).  
5. Press A to exit the setting screen.  
Warning!  
Always make sure you are in a safe place whenever you are reading the watch  
using the auto light switch. Be especially careful when running or engaged in  
any other activity that can result in accident or injury. Also take care that  
sudden illumination by the auto light switch does not surprise or distract  
others around you.  
When you are wearing the watch, make sure that its auto light switch is turned  
off before riding on a bicycle or operating a motorcycle or any other motor  
vehicle. Sudden and unintended operation of the auto light switch can create  
a distraction, which can result in a traffic accident and serious personal injury.  
Alarm Operation  
The alarm sounds at the preset time for about 20 seconds, regardless of the mode the  
watch is in. In the case of the snooze alarm, the alarm operation is performed a total  
of seven times, every five minutes, or until you turn the alarm off.  
Alarm and Hourly Time Signal operations are performed in accordance with the  
Timekeeping Mode digital time.  
To turn the auto light switch on and off  
In any mode, hold down B for about two seconds to toggle the auto light switch on  
(auto light switch indicator displayed) or off (auto light switch indicator not displayed).  
The auto light switch indicator is on the display in all modes while the auto light  
switch is turned on.  
To stop the alarm tone after it starts to sound, press any button.  
Performing any one of the following operations during a 5-minute interval between  
snooze alarms cancels the current snooze alarm operation.  
Displaying the Timekeeping Mode setting screen  
In order to protect against running down the battery, the auto light switch  
automatically turns off approximately six hours after you turn it on.  
Displaying the SNZ setting screen  
To test the alarm  
In the Alarm Mode, hold down D to sound the alarm.  
Reference  
This section contains more detailed and technical information about watch operation.  
It also contains important precautions and notes about the various features and  
functions of this watch.  
To turn an alarm on and off  
1. In the Alarm Mode, use D to select an alarm.  
Alarm on  
indicator  
ON  
2. Press A to toggle it on (  
displayed) and off  
On/Off status  
OF  
(
displayed).  
Graphic Area  
Turning on a one-time alarm (AL1through AL4)  
displays the alarm on indicator on its Alarm Mode  
screen.  
The following describes the information indicated by the graphic area in each mode.  
Mode  
Timekeeping  
World Time  
Countdown Timer  
Stopwatch  
Graphic Area  
Timekeeping Mode seconds  
World Time Mode seconds  
Countdown time minutes  
Stopwatch time seconds  
No indication  
Turning on the snooze alarm (SNZ) displays the alarm  
on indicator and snooze alarm indicator on the Alarm  
Mode snooze alarm screen, and in all other modes.  
In all modes (except for the Alarm Mode), the alarm on  
indicator is shown for any alarm that is currently turned  
on.  
Snooze alarm  
indicator  
Graphic area  
Alarm  
The alarm on indicator flashes while the alarm is  
Hand Setting  
No indication  
sounding.  
The snooze alarm indicator flashes during the 5-minute  
intervals between alarms.  
Auto Return Feature  
If you leave a screen with flashing digits on the display for two or three minutes  
without performing any operation, the watch automatically exits the setting screen.  
To turn the Hourly Time Signal on and off  
1. In the Alarm Mode, use D to select the Hourly Time  
On/Off status  
Signal (SIG).  
2. Press A to toggle it on (  
OF  
Scrolling  
ON  
displayed) and off  
The B and D buttons are used in various modes and setting screens to scroll  
through data on the display. In most cases, holding down these buttons during a scroll  
operation scrolls through the data at high speed.  
(
displayed).  
The Hourly Time Signal on indicator is shown on the  
display on the Alarm Mode Hourly Time Signal screen,  
and in all other modes while the Hourly Time Signal is  
turned on.  
Initial Screens  
When you enter the World Time or Alarm Mode, the data you were viewing when you  
last exited the mode appears first.  
Hourly time signal  
on indicator  
Timekeeping  
00  
Resetting the seconds to  
while the current count is in the range of 30 to 59  
causes the minutes to be increased by 1. In the range of 00 to 29, the seconds are  
Illumination  
00  
reset to  
without changing the minutes.  
An LED (light-emitting diode) illuminate the display for  
easy reading in the dark. The watchs auto light switch  
illuminates the display automatically when you angle the  
watch towards your face.  
The auto light switch must be turned on (indicated by  
the auto light switch indicator) for it to operate.  
See Illumination Precautionsfor more important  
information.  
With the 12-hour format, the PM indicator appears on the display for times in the  
range of noon to 11:59 p.m. and no indicator appears for times in the range of  
midnight to 11:59 a.m.  
With the 24-hour format, times are displayed in the range of 0:00 to 23:59, without  
any indicator.  
The year can be set in the range of 2000 to 2039.  
The watchs built-in full automatic calendar makes allowances for different month  
lengths and leap years. Once you set the date, there should be no reason to change  
it except after you have the watchs batteries replaced.  
Auto light switch indicator  
To turn on illumination manually  
World Time  
In any mode (except when a setting screen is on the display), press B to turn on  
illumination.  
All World Time Mode times are calculated from the current Home City time in the  
The above operation turns on illumination regardless of the current auto light switch  
Timekeeping Mode using UTC time differential values.  
setting.  
The UTC differential is a value that indicates the time difference between a  
reference point in Greenwich, England and the time zone where a city is located.  
The letters UTCis the abbreviation for Universal Time Coordinated, which is the  
world-wide scientific standard of timekeeping. It is based upon carefully maintained  
atomic (cesium) clocks that keep time accurately to within microseconds. Leap  
seconds are added or subtracted as necessary to keep UTC in sync with the Earths  
rotation.  
You can use the procedure below to select either one second or three seconds as  
the illumination duration. When you press  
one second or three seconds, depending on the current illumination duration setting.  
B, the illumination will remain on for about  
To specify the illumination duration  
1. In the Timekeeping Mode, hold down A until the  
seconds start to flash, which indicates the setting  
screen.  
2. Press C nine times so the illumination duration setting  
screen is on the display.  
Illumination Precautions  
The illumination provided by the light may be hard to see when viewed under direct  
sunlight.  
3. While the illumination duration setting is flashing, press  
D to toggle the setting between one second ( ) and  
three seconds ( ).  
Illumination automatically turns off whenever an alarm sounds.  
Frequent use of illumination runs down the battery.  
4. Press A to exit the setting screen.  
3
Download from Www.Somanuals.com. All Manuals Search And Download.  
Operation Guide 4762  
Auto light switch precautions  
Avoid wearing the watch on the inside of your wrist.  
Doing so causes the auto light switch to operate when it  
is not needed, which shortens battery life. If you want to  
wear the watch on the inside of your wrist, turn off the  
auto light switch feature.  
More than 15 degrees  
too high  
Illumination may not turn on if the face of the watch is  
more than 15 degrees above or below parallel. Make  
sure that the back of your hand is parallel to the ground.  
Illumination turns off in about one second or three  
seconds, even if you keep the watch pointed towards  
your face.  
Static electricity or magnetic force can interfere with proper operation of the auto  
light switch. If illumination does not turn on, try moving the watch back to the starting  
position (parallel with the ground) and then tilt it back towards you again. If this does  
not work, drop your arm all the way down so it hangs at your side, and then bring it  
back up again.  
Under certain conditions, illumination may not turn on until about one second after  
you turn the face of the watch towards you. This does not necessarily indicate  
malfunction of the auto light switch.  
You may notice a very faint clicking sound coming from the watch when it is shaken  
back and forth. This sound is caused by mechanical operation of the auto light  
switch, and does not indicate a problem with the watch.  
City Code Table  
City  
Code  
GMT  
Differential  
City  
Other major cities in same time zone  
– – –  
HNL  
ANC  
11.0  
10.0  
09.0  
Pago Pago  
Papeete  
Nome  
Honolulu  
Anchorage  
San Francisco, Las Vegas, Vancouver, Seattle/Tacoma,  
Dawson City  
LAX  
Los Angeles  
08.0  
DEN  
CHI  
Denver  
07.0  
06.0  
El Paso, Edmonton  
Houston, Dallas/Fort Worth, New Orleans, Mexico City,  
Winnipeg  
Chicago  
Montreal, Detroit, Miami, Boston, Panama City, Havana,  
Lima, Bogota  
La Paz, Santiago, Port Of Spain  
NYC  
CCS  
New York  
Caracas  
05.0  
04.0  
03.0  
02.0  
01.0  
RIO Rio De Janeiro  
Sao Paulo, Buenos Aires, Brasilia, Montevideo  
– – –  
– – –  
GMT  
Praia  
+00.0  
+01.0  
+02.0  
Dublin, Lisbon, Casablanca, Dakar, Abidjan  
LON  
London  
Paris  
Milan, Rome, Madrid, Amsterdam, Algiers, Berlin,  
Hamburg, Frankfurt, Vienna, Stockholm  
Athens, Helsinki, Istanbul, Beirut, Damascus,  
Cape Town  
Kuwait, Riyadh, Aden, Addis Ababa, Nairobi, Moscow  
Shiraz  
PAR  
CAI  
JRS  
JED  
THR  
DXB  
KBL  
KHI  
DEL  
DAC  
RGN  
BKK  
Cairo  
Jerusalem  
Jeddah  
Tehran  
Dubai  
Kabul  
Karachi  
Delhi  
+03.0  
+03.5  
+04.0  
+04.5  
+05.0  
+05.5  
+06.0  
+06.5  
+07.0  
Abu Dhabi, Muscat  
Male  
Mumbai, Kolkata, Colombo  
Dhaka  
Yangon  
Bangkok  
Jakarta, Phnom Penh, Hanoi, Vientiane  
Singapore, Kuala Lumpur, Beijing, Taipei, Manila,  
Perth, Ulaanbaatar  
HKG  
Hong Kong  
+08.0  
Tokyo  
Adelaide  
Sydney  
Noumea  
Wellington  
TYO  
ADL  
SYD  
NOU  
WLG  
+09.0  
+09.5  
+10.0  
+11.0  
+12.0  
Seoul, Pyongyang  
Darwin  
Melbourne, Guam, Rabaul  
Port Vila  
Christchurch, Nadi, Nauru Island  
*Based on data as of June 2006.  
4
Download from Www.Somanuals.com. All Manuals Search And Download.  

Blaupunkt Car Stereo System CR 47 User Manual
Blue Rhino Insect Control Equipment SV5100 User Manual
BoomGear MP3 Player MP 825BT User Manual
Bosch Appliances Clothes Dryer V20 UL User Manual
Broil King Convection Oven POV 013 User Manual
Bryant Furnace 320AAZ User Manual
Cal Flame Burner BBQ08852P User Manual
Canon Printer Accessories ip4200 CISS User Manual
Casablanca Fan Company Outdoor Ceiling Fan 3811Z User Manual
Chief Manufacturing Indoor Furnishings RPA U User Manual