MA0509-EA
Operation Guide 4367
About This Manual
• Depending on the model of your watch, display text
appears either as dark figures on a light background or
light figures on a dark background. All sample displays
in this manual are shown using dark figures on a light
background.
• For the sake of simplicity, the sample displays in this
manual do not show the analog hands of the watch.
• Button operations are indicated using the letters shown
in the illustration.
• Each section of this manual provides you with the
information you need to perform operations in each
mode. Further details and technical information can be
found in the “Reference” section.
General Guide
• Press C to change from mode to mode.
• In any mode (except when a setting screen is on the display), press B to illuminate
the display.
Timekeeping Mode
World Time Mode
Countdown Timer Mode
Stopwatch Mode
Alarm Mode
Hand Setting Mode
Press
.
Digital Time Daylight Saving Time (DST) Setting
Timekeeping
Daylight Saving Time (summer time) advances the digital
time setting by one hour from Standard Time. Remember
that not all countries or even local areas use Daylight
Saving Time.
DST indicator
This watch features separate digital and analog timekeeping. The procedures for
setting the digital time and analog time are different.
• In the Timekeeping Mode, you can press D to change the display format as shown
below.
To toggle the Timekeeping Mode digital time between
DST and Standard Time
1. In the Timekeeping Mode, hold down A until the seconds
start to flash, which indicates the setting screen.
2. Press C once to display the DST setting screen.
3. Press D to toggle between Daylight Saving Time (
Day of Week
Month – Day
PM indicator
displayed) and Standard Time (
4. Press A to exit the setting screen.
displayed).
• The DST indicator appears on the Month – Day screen
to indicate that Daylight Saving Time is turned on.
Hour
Seconds
Minutes
Setting the Analog Time
Digital Time and Date
Perform the procedure below when the time indicated by the analog hands does not
match the time of the digital display.
Use the Timekeeping Mode to set and view a digital display of the current time and date.
When setting the digital time, you can also configure settings for summer time
(Daylight Saving time or DST), your Home City code (the code for the city where you
normally use the watch), and the 12/24-hour format.
To adjust the analog time
1. In the Timekeeping Mode, press C five times to enter
the Hand Setting Mode.
• This watch is preset with a number of city codes, each of which represents the time
zone where that city is located. When setting the digital time, it is important that you
select the correct city code for your Home City. If your location is not included in the
preset city codes, select the preset city code that is in the same time zone as your
location.
• Note that all of the times for the World Time Mode city codes are displayed in
accordance with the digital time and date settings you configure in the Timekeeping
Mode.
2. Hold down A until the current digital time starts to
flash, which indicates the analog setting screen.
3. Press D to advance the analog time setting by
20 seconds.
• Holding down D advances the analog time setting at
high speed.
• After you correctly set your Home City time and date, you can set the watch up for
timekeeping with a different city code simply by changing the Home City code in the
Timekeeping Mode.
• If you need to advance the analog time setting a long way, hold down D until the
time starts advancing at high speed, and then press B. This locks the high-
speed hand movement, so you can release the two buttons. High-speed hand
movement continues until you press any button. It will also stop automatically
after the time advances 12 hours or if an alarm (daily alarm or countdown beeper)
starts to sound.
To set the digital time and date
1. In the Timekeeping Mode, hold down A until the
seconds start to flash, which indicates the setting
screen.
2. Press C twice to move the flashing to the Home City
code setting (see the illustration below), and then use
B and D to select the code you want.
• Make sure you select your Home City code before
changing any other setting.
4. Press A to exit the setting screen.
• The watch will automatically adjust the minute hand slightly to match its internal
second count when you exit the setting screen.
• To return to the Timekeeping Mode, press C.
World Time
• For full information on city codes, see the “City Code
Table”.
World Time digitally displays the current time in 27 cities
(29 time zones) around the world.
City code
3. Press C to move the flashing in the sequence shown below to select the other
settings.
• All of the operations in this section are performed in the
World Time Mode, which you enter by pressing C.
Seconds
Day
DST
Home City Code
Hour
Minutes
To view the time in another city
In the World Time Mode, press D to scroll eastwardly
through city codes.
• For full information about city codes, see the “City Code
Table”.
• If the current time shown for a city is wrong, it probably
means there is a problem with your Timekeeping Mode
time and/or Home City code settings. Go to the
Timekeeping Mode and make the necessary
adjustments.
Month
Year
12/24-Hour format
Current time for
the selected city code
4. When the setting you want to change is flashing, use B and D to change it as
described below.
Screen
To do this:
Do this:
Reset the seconds to
Press D.
Press D.
Toggle between Daylight Saving Time (
and Standard Time (
)
)
Change the Home City code
Change the hour or minutes
Use D (east) and B (west).
Use D (+) and B (–).
Press D.
Toggle between 12-hour (12H) and 24-hour
(24H) timekeeping
Change the year
Use D (+) and B (–).
Change the month or day
5. Press A to exit the setting screen.
• See “Digital Time Daylight Saving Time (DST) Setting” below for details about the
DST setting.
1
Download from Www.Somanuals.com. All Manuals Search And Download.
Operation Guide 4367
To turn the Hourly Time Signal on and off
City Code Table
1. In the Alarm Mode, use D to select the Hourly Time
Hourly time signal
on indicator
City
City
GMT
Signal (SIG).
Other major cities in same time zone
Pago Pago
Papeete
Nome
San Francisco, Las Vegas, Vancouver, Seattle/Tacoma,
Dawson City
Code
Differential
2. Press A to toggle it on (
displayed) and off
– – –
HNL
ANC
–11.0
–10.0
–09.0
(
displayed).
Honolulu
Anchorage
• The Hourly Time Signal on indicator is shown on the
display in all modes while the Hourly Time Signal is
turned on.
LAX
Los Angeles
–08.0
DEN
CHI
Denver
–07.0
–06.0
El Paso, Edmonton
Houston, Dallas/Fort Worth, New Orleans,
Mexico City, Winnipeg
Chicago
Montreal, Detroit, Miami, Boston, Panama City,
Havana, Lima, Bogota
La Paz, Santiago, Port Of Spain
NYC
CCS
New York
Caracas
–05.0
On/Off status
–04.0
–03.0
–02.0
–01.0
RIO Rio De Janeiro
Sao Paulo, Buenos Aires, Brasilia, Montevideo
– – –
– – –
GMT
Reference
Praia
+00.0
+01.0
+02.0
Dublin, Lisbon, Casablanca, Dakar, Abidjan
This section contains more detailed and technical information about watch operation.
It also contains important precautions and notes about the various features and
functions of this watch.
LON
London
Paris
Milan, Rome, Madrid, Amsterdam, Algiers,
Hamburg, Frankfurt, Vienna, Stockholm, Berlin
Athens, Helsinki, Istanbul, Beirut, Damascus,
Cape Town
Kuwait, Riyadh, Aden, Addis Ababa, Nairobi, Moscow
Shiraz
Abu Dhabi, Muscat
PAR
CAI
JRS
JED
THR
DXB
KBL
KHI
DEL
DAC
RGN
BKK
Cairo
Jerusalem
Jeddah
Tehran
Dubai
Kabul
Karachi
Delhi
Graphic
+03.0
+03.5
+04.0
+04.5
+05.0
+05.5
+06.0
+06.5
+07.0
The following describes the information indicated by the graphic in each mode.
Male
Mumbai, Kolkata
Colombo
Dhaka
Yangon
Bangkok
Graphic
Jakarta, Phnom Penh, Hanoi, Vientiane
Singapore, Kuala Lumpur, Beijing, Taipei, Manila,
Perth, Ulaanbaatar
HKG
Hong Kong
+08.0
Tokyo
Adelaide
Sydney
Noumea
Wellington
TYO
ADL
SYD
NOU
WLG
+09.0
+09.5
+10.0
+11.0
+12.0
Seoul, Pyongyang
Darwin
Melbourne, Guam, Rabaul
Port Vila
Christchurch, Nadi, Nauru Island
Mode
Graphic
Timekeeping Mode seconds
Timekeeping
World Time
Timekeeping Mode seconds
Countdown time minutes
Stopwatch time seconds
No indication
Countdown Timer
Stopwatch
*Based on data as of December 2004.
Alarm
Hand Setting
No indication
Auto Return Feature
If you leave a screen with flashing digits on the display for two or three minutes
without performing any operation, the watch automatically exits the setting screen.
Scrolling
The B and D buttons are used in various modes and setting screens to scroll
through data on the display. In most cases, holding down these buttons during a scroll
operation scrolls through the data at high speed.
Initial Screens
When you enter the World Time or Alarm Mode, the data you were viewing when you
last exited the mode appears first.
Timekeeping
• Resetting the seconds to
while the current count is in the range of 30 to 59
causes the minutes to be increased by 1. In the range of 00 to 29, the seconds are
reset to without changing the minutes.
• With the 12-hour format, the P (PM) indicator appears on the display for times in the
range of noon to 11:59 p.m. and no indicator appears for times in the range of
midnight to 11:59 a.m.
• With the 24-hour format, times are displayed in the range of 0:00 to 23:59, without
any indicator.
• The year can be set in the range of 2000 to 2039.
• The watch’s built-in full automatic calendar makes allowances for different month
lengths and leap years. Once you set the date, there should be no reason to change
it except after you have the watch’s batteries replaced.
World Time
• The World Time Mode times are calculated from the current Home City time setting
in the Timekeeping Mode, using the Greenwich Mean Time (GMT) differentials
associated with each city code.
• The GMT differential is a value that indicates the time difference between Greenwich
Mean Time and the time zone where a city is located.
• GMT differential is calculated by this watch based on Universal Time Coordinated
(UTC) data.
Backlight Precautions
The backlight uses an EL (electro-luminescent) panel that causes the entire display to
glow for easy reading in the dark. In any mode, press B to illuminate the display for
about two seconds.
• The electro-luminescent panel that provides illumination loses power after very long
use.
• The illumination provided by the backlight may be hard to see when viewed under
direct sunlight.
• The watch may emit an audible sound whenever the display is illuminated. This is
due to vibration of the EL panel used for illumination, and does not indicate
malfunction.
• The backlight automatically turns off whenever an alarm sounds.
• Frequent use of the backlight shortens the battery life.
3
Download from Www.Somanuals.com. All Manuals Search And Download.
|