MO0606-EA
Operation Guide 3054
Getting Acquainted
Congratulations upon your selection of this CASIO watch. To get the most out of your
purchase, be sure to read this manual carefully.
About This Manual
• Button operations are indicated using the letters shown
in the illustration.
• Each section of this manual provides you with the
information you need in order to perform operations in
each mode. Further details and technical information
can be found in the “Reference” section.
Caution!
Your watch is shipped with it Auto Display feature (which continually changes the
contents of the digital display) turned on. Calibration signal reception is disabled while
Auto Display is turned on.
Press any button to turn off Auto Display and return to the Timekeeping Mode.
World Time Mode
Countdown Timer Mode
General Guide
• Press C to change from mode to mode.
• In any mode (except when a setting screen is on the display), press B to illuminate
the display.
Timekeeping Mode
Press C.
Alarm Mode
Stopwatch Mode
Radio-controlled Atomic Timekeeping
Month – Day
• Manual Receive
This watch receives a time calibration signal and updates
its time setting accordingly.
• Supported time calibration signals: United States (Fort
Collins), England (Rugby).
PM
indicator
Manual receive lets you start a time calibration receive operation with the press of a
Year
button. For more information, see “To perform manual receive”.
Important!
• When getting ready to receive the time calibration signal, position the watch as
shown in the nearby illustration, with its 12 o'clock side facing towards a window.
Make sure there are no metal objects nearby.
Current Time Setting
This watch adjusts its time setting automatically in
accordance with a time calibration signal.You can also
perform a manual procedure to set the time and date,
when necessary.
• The first thing you should do after purchasing this watch
is to specify your Home City (the city where you
normally will use the watch). For more information, see
“To specify your Home City”.
Day of week
Home Time
12 o’clock
(Hour : Minutes Seconds)
or
• When using the watch outside the areas covered by the time signal transmitters, you
will have to adjust the current time setting manually as required. See “Timekeeping”
for more information about manual time settings.
• The U.S. time calibration signal can be picked up by the watch while in North
America. The term “North America” in this manual refers to the area that consists of
Canada, the continental United States, and Mexico.
• Make sure the watch is facing the right way.
• Proper signal reception can be difficult or even impossible under the conditions listed
To specify your Home City
below.
1. In the Timekeeping Mode, hold down A until the city
code starts to flash, which indicates the setting screen.
2. Press D(east) and B(west) to select the city code you
want to use as your Home City.
l
l l
l
l
l l
• Time calibration signal reception is supported when
any one of the city codes shown in the table below is
selected as your Home City.
l l
l
l
Inside or
among
buildings
Inside a
vehicle
Near
Near a
Near high-
tension
Among or
behind
mountains
City code
household
appliances,
office
construction
site, airport,
or other
U.S. Signal
U.K. Signal
power lines
City City
City City
City City
Code Name
YWG Winnipeg LIS Lisbon
City City
Code Name
ATH Athens
Code Name
Code Name
equipment,
or a mobile
phone
sources of
electrical
noise
HNL Honolulu
ANC Anchorage CHI Chicago LON London
YVR Vancouver MIA Miami MAD Madrid
LAX Los Angeles YTO Toronto PAR Paris
MOW Moscow
• Signal reception normally is better at night than during the day.
• Time calibration signal reception takes from two to seven minutes, but in some
cases it can take as long as 14 minutes. Take care that you do not perform any
button operations or move the watch during this time.
YEA Edmonton
DEN Denver
NYC New York ROM Rome
YHZ Halifax BER Berlin
MEX Mexico City YYT St. Johns STO Stockholm
3. Press A to exit the setting screen.
Important!
• Normally, your watch should show the correct time as soon as you select your Home
City code. If it does not, it should adjust automatically after the next auto receive
operation (in the middle of the night).You can also perform manual receive or you
can set the time manually.
• The watch will receive the time calibration signal automatically from the applicable
transmitter (in the middle of the night) and update its settings accordingly. For
information about the relationship between city codes and transmitters, see “Home
City Codes and Transmitters”.
• Under factory default settings, auto receive is turned off for all of the following city
codes: HNL (Honolulu), ANC (Anchorage), ATH (Athens), and MOW (Moscow). For
details about turning on auto receive for these city codes, see “To turn auto receive
on and off”.
• The time calibration signal the watch will attempt to pick up depends on its current
Home City code setting as shown below.
Home City Codes and Transmitters
Home City Code
Transmitter
Frequency
HNL*, ANC*,YVR,
LAX,YEA, DEN, MEX,
YWG, CHI, MIA,YTO,
NYC,YHZ,YYT
Fort Collins, Colorado
(the United States)
60.0 kHz
LIS, LON,
MAD, PAR, ROM, BER, Rugby (England)
60.0 kHz
STO, ATH*, MOW*
* The areas covered by the HNL, ANC, ATH, and MOW city codes are quite far from
the time calibration signal transmitters, and so certain conditions may cause
problems with signal reception.
• You can disable time signal reception, if you want. See “To turn auto receive on and
off” for more information.
• See the maps under “Reception Ranges” for information about the reception ranges
of the watch.
• If you are in an area that does not use Daylight Saving Time (summertime), turn off
the DST setting.
Reception Ranges
U.K. Signal
1,500 kilometers
U.S. Signal
2,000 miles
(3,000 kilometers)
Time Calibration Signal Reception
There are two different methods you can use to receive the time calibration signal:
auto receive and manual receive.
Rugby
600 miles
(1,000 kilometers)
• Auto Receive
Fort Collins
With auto receive, the watch receives the time calibration signal automatically up to
six times a day. When any auto receive is successful, the remaining auto receive
operations are not performed. For more information, see “About Auto Receive”.
500 kilometers
1
Download from Www.Somanuals.com. All Manuals Search And Download.
Operation Guide 3054
Countdown Timer
You can set the countdown timer within a range of one to
Timekeeping Mode time
(Hour : Minutes Seconds)
Alarm Operation
60 minutes. An alarm sounds when the countdown
The alarm sounds at the preset time for about 10 seconds (in all modes), or until you
reaches zero.
stop it by pressing any button.
• All of the operations in this section are performed in the
Countdown Timer Mode, which you enter by pressing
C.
To test the alarm
In the Alarm Mode, hold down D to sound the alarm.
To turn the daily alarm and the Hourly Time Signal on and off
In the Alarm Mode, press D to cycle through the settings shown below.
Alarm On Indicator / Hourly Time Signal On Indicator
Minutes
Seconds
To set the countdown start time
1. While the countdown start time is on the display in the Countdown Timer Mode,
hold down A until the current countdown start time starts to flash, which indicates
the setting screen.
• If the countdown start time is not displayed, use the procedure under “To use the
countdown timer” to display it.
Alarm Off
Signal Off
Alarm On
Signal Off
Alarm Off
Signal On
Alarm On
Signal On
2. While a setting is flashing, use D (+) and B (–) to change it.
3. Press A to exit the setting screen.screen.
• The alarm on indicator and the Hourly Time Signal on indicator are shown on the
display in all modes while these functions are turned on.
To use the countdown timer
Press D while in the Countdown Timer Mode to start the countdown timer.
• When the end of the countdown is reached, the alarm sounds for 10 seconds or until
you stop it by pressing any button. The countdown time is reset automatically to its
starting value after the alarm stops.
• Press D while a countdown operation is in progress to pause it. Press D again to
resume the countdown.
• To stop a countdown operation completely, first pause it (by pressing D), and then
press A. This returns the countdown time to its starting value.
• Calibration signal reception is disabled while a countdown timer operation is in
progress.
Timekeeping
Use the Timekeeping Mode to set and view the current time and date.
• When setting the time, you can also configure settings for the City Code, the DST
setting, the 12/24-Hour Format, Year, Month, Day, the Language setting, and the
Month/Day display format, and you can specify the screens that are displayed in the
Timekeeping Mode.
• Pressing D in the Timekeeping Mode will display the Last Signal screen.
CurrentTime and Date screen
Last Signal Screen
Stopwatch
The stopwatch lets you measure elapsed time, split times,
Press D.
Timekeeping Mode time
(Hour : Minutes Seconds)
and two finishes.
• The display range of the stopwatch is 59 minutes, 59.99
seconds.
• The stopwatch continues to run, restarting from zero
after it reaches its limit, until you stop it.
• Exiting the Stopwatch Mode while a split time is frozen
on the display clears the split time and returns to
elapsed time measurement.
• The stopwatch measurement operation continues even
if you exit the Stopwatch Mode.
Note
This watch is capable of displaying text for the day of the week in any one of
different languages (English, Spanish, French, Portuguese, German, Italian, Chinese,
Russian, and Japanese).
9
Setting the Time and Date
Minutes Seconds
• All of the operations in this section are performed in the
Stopwatch Mode, which you enter by pressing C.
Make sure you select your Home City code before you change the current time and
date settings. World Time Mode times are all displayed in accordance with the
Timekeeping Mode settings. Because of this, World Time Mode times will not be
correct if you do not select the proper Home City code before setting the time and
date in the Timekeeping Mode.
1/100
seconds
To measure times with the stopwatch
Elapsed Time
To set the time and date
D
Start
➤D
Stop
➤D
Re-start
➤
D
➤A
Clear
1. In the Timekeeping Mode, hold down A until the city
code starts to flash, which indicates the setting screen.
2. Press C to change the flashing contents in the
sequence shown below to select other settings.
Stop
Split Time
A
A
➤D
Stop
➤
D
Start
➤A
Split
(SPL displayed)
➤
Split release
Clear
Two Finishes
City code
A
D
➤A
Split release
Display time of
second runner.
➤
D
Start
➤A
Split
➤
12/24-Hour
Format
DST
Seconds
Hour
Minutes
Year
City Code
Stop
Second r unner
finishes.
Clear
First runner
finishes.
Display time of
first runner.
Language
Month/Day Display Format
Day
Month
3. When the setting you want to change is flashing, use B and/or D to change it as
described below.
Alarm
After you set (and turn on) the daily alarm, the alarm tone
sounds when the alarm time is reached.You can also turn
on an Hourly Time Signal that causes the watch to beep
for about one second every hour on the hour.
• All of the operations in this section are performed in the
Alarm Mode, which you enter by pressing C.
Screen:
To do this:
Do this:
Timekeeping Mode time
(Hour : Minutes Seconds)
Change the city code
Use D (east) and
B (west).
Standard Time Press D.
),
Cycle between auto DST (
(
), and Daylight Saving Time (
)
Toggle between 12-hour (12H) and 24-hour
Press D.
Press D.
(24H) timekeeping
Reset the seconds to
Alarm on
indicator
Alarm time
(Hour : Minutes)
Change the hour, minutes, or year
Use D (+) and B
(–).
Hourly time
signal on
indicator
Change the month or day
To set the alarm time
Change the language
ENG: English ESP: Spanish FRA: French
POR: Portuguese DEU: German
Use D and B.
1. In the Alarm Mode, hold down A until the hour setting
of the alarm time starts to flash, which indicates the
setting screen.
• This automatically turns on the alarm.
2. Press C to move the flashing between the hour and
minute settings.
ITA: Italian CHN: Chinese RUS: Russian
JPN: Japanese
Press D.
Toggle the month/day display format between
month/day (M/D) and day/month (D/M).
• See “City Code Table” for a complete list of available city codes.
• See the “Day of the Week List” for information on abbreviations used.
) can be selected only while HNL, ANC, YVR, LAX, YEA, DEN,
3. While a setting is flashing, use D (+) and B (–) to change it.
• When setting the alarm time using the 12-hour format, take care to set the time
correctly as a.m. (A indicator) or p.m. (P indicator).
• Auto DST (
MEX, YWG, CHI, MIA, YTO, NYC, YHZ, YYT, LIS, LON, MAD, PAR, ROM, BER,
STO, ATH, or MOW is selected as the Home City code. For more information, see
“Daylight Saving Time (DST)” below.
4. Press A to exit the setting screen.
4. Press A to exit the setting screen.
3
Download from Www.Somanuals.com. All Manuals Search And Download.
Operation Guide 3054
• If you are in an area where proper time calibration signal reception is impossible, the
Daylight Saving Time (DST)
watch keeps time within 20 seconds a month at normal temperature.
• If you have problems with proper time calibration signal reception or if the time
setting is wrong after signal reception, check your current city code, DST (summer
time), and auto receive settings.
Daylight Saving Time (summer time) advances the time setting by one hour from
Standard Time. Remember that not all countries or even local areas use Daylight
Saving Time.
The time calibration signals transmitted from Fort Collins (the United States) or Rugby
(England) includes both Standard Time and DST data. When the Auto DST setting is
turned on, the watch switches between Standard Time and DST (summer time)
automatically in accordance with the received time signal.
• The default DST setting is Auto DST (
YEA, DEN, MEX, YWG, CHI, MIA, YTO, NYC, YHZ, YYT, LIS, LON, MAD, PAR,
ROM, BER, STO, ATH, or MOW as your Home City code.
• If you experience problems receiving the time calibration signal in your area, it
probably is best to switch between Standard Time and Daylight Saving Time
(summer time) manually.
The following are the initial factory defaults for these settings.
Setting
Initial Factory Default
City code
NYC(New York)
) whenever you select ANC, YVR, LAX,
DST (summer time)
(Auto switching)
(Auto receive)
Auto receive
Timekeeping
• Resetting the seconds to 00 while the current count is in the range of 30 to 59
causes the minutes to be increased by 1. In the range of 00 to 29, the seconds are
reset to 00 without changing the minutes.
To change the Daylight Saving Time (summer time) setting
1. In the Timekeeping Mode, hold down A until the city code starts to flash, which
indicates the setting screen.
• The day of the week is displayed automatically in accordance with the date (year,
2. Press C and the DST setting screen appears.
month, and day) settings.
• The year can be set in the range of 2000 to 2099.
3. Use D to cycle through the DST settings in the sequence shown below.
• The watch’s built-in full automatic calendar makes allowances for different month
lengths and leap years. Once you set the date, there should be no reason to change
it except after you have the watch’s battery replaced.
Auto DST (
)
DST off (
)
DST on (
)
• The times for the Timekeeping Mode and all the city codes of the World Time Mode
are calculated in accordance with each city’s UTC differential.
4. When the setting you want is selected, press A to exit the setting screen.
• The DST indicator appears to indicate that Daylight Saving Time is turned on.
• The UTC differential is a value that indicates the time difference between a
reference point in Greenwich, England and the time zone where a city is located.
• The letters “UTC” is the abbreviation for “Universal Time Coordinated”, which is the
world-wide scientific standard of timekeeping. It is based upon carefully maintained
atomic (cesium) clocks that keep time accurately to within microseconds. Leap
seconds are added or subtracted as necessary to keep UTC in sync with the Earth’s
rotation.
Reference
This section contains more detailed and technical information about watch operation.
It also contains important precautions and notes about the various features and
functions of this watch.
12-hour/24-hour Timekeeping Formats
The 12-hour/24-hour timekeeping format you select in the Timekeeping Mode is also
applied in all other modes.
• With the 12-hour format, the PM indicator (P) appears on the display for times in the
range of noon to 11:59 p.m. and AM indicator (A) appears for times in the range of
midnight to 11:59 a.m.
• With the 24-hour format, times are displayed in the range of 0:00 to 23:59, without
any indicator.
Auto Display
Auto Display continually changes the contents of the digital display.
To turn off Auto Display
Press any button to turn off Auto Display. This returns to the Timekeeping Mode.
To turn on Auto Display
In the Timekeeping Mode, while holding down B, hold down D for about two
seconds until the watch beeps.
Illumination
This watch has an EL (electro-luminescent) panel that causes the entire display to
glow for easy reading in the dark. In any mode (except when a setting screen is on the
display), press B to illuminate the display for about three seconds.
Note
• Calibration signal reception is disabled while Auto Display is being performed.
• Auto Display cannot be performed while a setting screen is on the display.
Illumination Precautions
• The electro-luminescent panel that provides illumination loses power after very long
Button Operation Tone
use.
The button operation tone sounds any time you press one
of the watch’s buttons.You can turn the button operation
tone on or off as desired.
• Illumination may be hard to see when viewed under direct sunlight.
• The watch may emit an audible sound whenever the display is illuminated.
This is due to vibration of the EL panel used for illumination, and does not indicate
malfunction.
• Even if you turn off the button operation tone, the alarm,
Hourly Time Signal, and Countdown Timer Mode alarm
all operate normally.
• Illumination automatically turns off whenever an alarm sounds.
• Frequent use of illumination runs down the battery.
To turn the button operation tone on and off
In any mode (except when a setting screen is on the
Day of the Week List
MUTE indicator
display), hold down C to toggle the button operation tone
on (
not displayed) and off (
displayed).
Sunday Monday Tuesday Wednesday Thursday Friday Saturday
• Since the C button is also the mode change button, holding it down to turn the
button operation tone on or off also causes the watch’s current mode to change.
•
ENx
ESP
FRA
POR
DEU
ITA
CHN
RUS
JPN
SUN
DOo
DIo
DOo
SON
DOo
oON
LUN
LUN
SEx
oON
LUN
TUE
oAR
oAR
TER
DIE
oAR
WED
oIb
oER
QUA
oIT
oER
THU
JUE
JEU
QUI
DON
xIO
FRI
VIE
VEN
SEX
FRE
VEN
SAT
SaB
SAo
SaB
SAo
SAB
is displayed in all modes when the button operation tone is turned off.
Auto Return Features
• If you leave the watch with the Last Signal screen in the Timekeeping Mode for one
or two minutes without performing any operation, it returns to the Current Time and
Date screen in the Timekeeping Mode automatically.
• If you leave the watch in the Alarm Mode for two or three minutes without performing
any operation, it returns to the Timekeeping Mode automatically.
• If you leave the watch with a flashing setting on the display for two or three minutes
without performing any operation, the watch exits the setting screen automatically.
CS
QO
BT
SR
YT
QT
SB
City Code Table
Scrolling
B and D are used in various modes and setting screens to scroll through data. In
most cases, holding down these buttons during a scroll operation scrolls through the
data at high speed.
City
City
UTC
Other major cities in same time zone
Code
Differential
PPG
HNL
ANC
YVR
LAX
YEA
DEN
MEX
YWG
CHI
Pago Pago
Honolulu
Anchorage
Vancouver
Los Angeles
Edmonton
Denver
Mexico City
Winnipeg
Chicago
–11.0
–10.0
–09.0
Papeete
Nome
Initial Screens
San Francisco, Las Vegas,
Seattle/Tacoma, Dawson City
–08.0
–07.0
When you enter the World Time or Alarm Mode, the data you were viewing when you
last exited the mode appears first.
El Paso
Radio-controlled Atomic Timekeeping Precautions
• The display of the watch is blank while an auto receive operation is in progress.
• Strong electrostatic charge can result in the wrong time being set.
• The time calibration signal is bounced off the ionosphere. Because of this, such
factors as changes in the reflectivity of the ionosphere, as well as movement of the
ionosphere to higher altitudes due to seasonal atmospheric changes or the time of
day may change the reception range of the signal and make reception temporarily
impossible.
–06.0
Houston, Dallas/Fort Worth, New Orleans
MIA
Miami
Montreal, Detroit, Boston,
Panama City, Havana, Lima, Bogota
YTO
NYC
CCS
YHZ
YYT
RIO
Toronto
–05.0
–04.0
New York
Caracas
Halifax
St. Johns
Rio De Janeiro
Praia
La Paz, Santiago, Port Of Spain
–03.5
–03.0
–01.0
Sao Paulo, Buenos Aires, Brasilia, Montevideo
• Even if the time calibration signal is received properly, certain conditions can cause
RAI
the time setting to be off by up to one second.
LIS
LON
MAD
PAR
ROM
BER
STO
ATH
CAI
JRS
MOW
JED
THR
DXB
KBL
KHI
Lisbon
London
Madrid
Paris
Rome
Berlin
Stockholm
Athens
Cairo
Jerusalem
Moscow
Jeddah
Tehran
Dubai
• The current time setting in accordance with the time calibration signal takes priority
over any time settings you make.
+00.0
Dublin, Casablanca, Dakar, Abidjan
• The watch is designed to update the date and day of the week automatically for the
period January 1, 2000 to December 31, 2099. Setting of the date by a time
calibration signal cannot be performed starting from January 1, 2100.
• This watch can receive signals that differentiate between leap years and non-leap
years.
+01.0
Milan, Amsterdam, Algiers, Hamburg, Frankfurt, Vienna
Helsinki, Istanbul, Beirut, Damascus,
Cape Town
+02.0
+03.0
• Though this watch is designed to receive both time data (hour, minutes, seconds)
and date data (year, month, day), certain signal conditions can limit reception to time
data only.
• Normally, the signal reception date shown by the Receive Mode is the date data
included in the received time calibration signal. When only time data is received,
however, the Receive Mode shows the date as kept in the Timekeeping Mode at the
time of signal reception.
Kuwait, Riyadh, Aden, Addis Ababa, Nairobi
+03.5
+04.0
+04.5
+05.0
+05.5
Shiraz
Abu Dhabi, Muscat
Kabul
Karachi
Delhi
Male
Mumbai, Kolkata
DEL
4
Download from Www.Somanuals.com. All Manuals Search And Download.
Operation Guide 3054
City
Code
DAC
RGN
BKK
HKG
BJS
UTC
Differential
+06.0
+06.5
+07.0
City
Other major cities in same time zone
Dhaka
Yangon
Bangkok
Hong Kong
Beijing
Colombo
Jakarta, Phnom Penh, Hanoi, Vientiane
+08.0
Singapore, Kuala Lumpur, Manila, Perth, Ulaanbaatar
TPE
SEL
TYO
ADL
GUM
SYD
NOU
WLG
Taipei
Seoul
Tokyo
Adelaide
Guam
Sydney
Noumea
Wellington
+09.0
+09.5
+10.0
Pyongyang
Darwin
Melbourne, Rabaul
+11.0
+12.0
Port Vila
Christchurch, Nadi, Nauru Island
• Based on data as of December 2005.
5
Download from Www.Somanuals.com. All Manuals Search And Download.
|