Casio Projector XJ A130V XJ A135V User Manual

                       
                       
                       
                       
                       
                       
JEGFSISwChK
ޓ
Z  
՘੥ᝢ஥ంᴥ
ژ
ట፾ᴦ  
టంɂȝᝣɒȾȽȶȲऻɕ
۾
ҒȾίከ  
ȪȹȢȳȨȗǿ  
DATA PROJECTOR  
XJ-A130V/XJ-A135V*  
XJ-A140V/XJ-A145V*  
XJ-A150V/XJ-A155V*  
XJ-A230V/XJ-A235V*  
XJ-A240V/XJ-A245V*  
XJ-A250V/XJ-A255V*  
User’s Guide (Basic Operations)  
Be sure to keep all user documentation  
handy for future reference.  
Bedienungsanleitung  
(Grundbedienung)  
Bitte bewahren Sie die gesamte  
Benutzerdokumentation für späteres Nachschlagen auf.  
Mode d’emploi  
(Opérations de base)  
Conservez la documentation à portée de  
main pour toute référence future.  
* ÕÓÂብ
ފ
͇Ƞʬʑʵ  
* USB port models  
* Modelle mit USB-Port  
* Modèles à port USB  
* Modelos con puerto USB  
* Modelli con porta USB  
* Modeller med USB-port  
*
Guía del usuario  
(Operaciones básicas)  
Asegúrese de tener a mano toda la  
documentación del usuario para futuras consultas.  
Guida dell’utilizzatore  
(Operazioni di base)  
Conservare l’intera documentazione dell’utente  
a portata di mano per riferimenti futuri.  
*
Instruktionshäfte  
(Grundläggande anvisningar)  
Förvara all användardokumentation nära till  
hands för framtida referens.  
٥
ڒ
Ⱦɛɝ៧ۨȨɟȹȗȽȗʬʑʵɕȕɝɑȬǿ  
• Some models covered by this User’s Guide may not be available  
in certain geographic areas.  
• Einige der in diese Bedienungsanleitung einbezogenen Modelle  
sind in bestimmten Gebieten eventuell nicht erhältlich.  
• Certains modèles couverts par ce mode d’emploi peuvent ne  
pas être commercialisés dans certaines zones géographiques.  
• Algunos modelos cubiertos por esta Guía del usuario pueden no  
estar disponibles en determinadas áreas geográficas.  
Alcuni modelli riportati da questa Guida dell’utilizzatore potrebbero  
non essere disponibili in determinate aree geografiche.  
• Vissa modeller som beskrivs i detta instruktionshäfte saluförs  
inte i vissa områden.  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Safety Precautions  
Thank you for selecting this CASIO product. Be sure to read these “Safety Precautions” before trying to  
use it. After reading this User’s Guide, keep it in a safe place for future reference.  
About safety symbols  
Various symbols are used in this User’s Guide and on the product itself to ensure safe use, and to  
protect you and others against the risk of injury and against material damage. The meaning of each of the  
symbols is explained below.  
This symbol indicates information that, if ignored or applied incorrectly,  
creates the risk of death or serious personal injury.  
Danger  
*
*
This symbol indicates information that, if ignored or applied incorrectly, could  
possibly create the risk of death or serious personal injury.  
Warning  
This symbol indicates information that, if ignored or applied incorrectly, could  
possibly create the risk of personal injury or material damage.  
Caution  
*
Icon Examples  
A triangle indicates a situation against which you need to exercise caution. The example shown  
here indicates you should take precaution against electric shock.  
!
$
A circle with a line through it indicates information about an action that you should not perform.  
The specific action is indicated by the figure inside the circle. The example shown here means  
disassembly is prohibited.  
A black circle indicates information about an action that you must perform. The specific action  
is indicated by the figure inside the circle. The example shown here indicates you must unplug  
the power cord from the power outlet.  
Precautions During Use  
Malfunction  
Immediately stop using the projector if  
Warning  
*
the screen appears abnormal, or if any  
other abnormal operation occurs even  
though you are operating the projector  
correctly. Continued use creates the risk  
of fire and electric shock. Immediately  
perform the following steps.  
-
Smoke, odor, heat, and other  
abnormalities  
Should you ever notice smoke, strange  
odor, or any other abnormality,  
immediately stop using the projector.  
Continued use creates the risk of fire and  
electric shock. Immediately perform the  
following steps.  
-
Turn off the projector.  
Unplug the projector.  
Contact your original dealer or authorized  
CASIO service center.  
1.  
2.  
3.  
Unplug the projector.  
Contact your original dealer or authorized  
CASIO service center.  
1.  
2.  
Power cord  
Misuse of the power cord creates the risk  
of fire and electric shock.  
Make sure that you always observe the  
following precautions.  
+
• Make sure that you use a power source with the  
same voltage as that specified for the projector.  
• Do not overload a power outlet with too many  
devices.  
E-2  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Safety Precautions  
Dropping and impact  
A damaged power cord creates the risk  
of fire and electric shock.  
Make sure that you always observe the  
following precautions.  
Continued use of the projector after it has  
been damaged by dropping or other  
mistreatment creates the risk of fire and  
electric shock. Immediately perform the  
following steps.  
-
-
• Never place heavy objects on the power cord  
and never expose it to heat.  
• Make sure the power cord is not pinched  
between the wall and the rack or table where the  
projector is located, and never cover the power  
cord with a cushion or other object.  
• Never try to modify the power cord, allow it to  
become damaged, or subject it to excessive  
bending.  
Turn off the projector.  
Unplug the projector.  
Contact your original dealer or authorized  
CASIO service center.  
1.  
2.  
3.  
Disposal by burning  
• Do not twist the power cord or pull on it.  
Never try to dispose of the projector by  
burning it. Doing so can cause an  
explosion, which creates the risk of fire  
and personal injury.  
Never touch the power cord or plug while  
your hands are wet.  
Doing so creates the risk of electric  
shock.  
-
"
Looking into the lens or vents while  
light source unit is on  
• When using this projector in the country where  
you purchased it, be sure to use the power cord  
that came with it. Whenever using the projector  
in another country, be sure to purchase and use  
a power cord that is rated for the voltage of that  
country. Also make sure that you are aware of  
the Safety Standards that apply in that country.  
Never look directly into the lens or vents  
while light source unit is on. The strong  
-
Blocking the vents  
light emitted by the projector creates the  
risk of eye damage.  
Water and foreign matter  
Never allow the intake vents or the  
Never allow water to get on the projector.  
Water creates the risk of fire and electric  
shock.  
Never place a vase or any other container  
of water on top of the projector. Water  
creates the risk of fire and electric shock.  
Water or other liquid, or foreign matter  
(metal, etc.) getting into the projector  
creates the risk of fire and electric shock.  
exhaust vents to become blocked. Doing  
so causes internal heat build up, which  
-
+
%
%
creates the risk of fire and breakdown of  
the projector. Touching the projector  
while it is hot creates the risk of burn  
injury. Make sure that you always  
observe the following precautions.  
• Allow at least 30cm (11.8 inches) between the  
projector and walls.  
• Do not insert the projector into any space where  
air circulation is poor.  
• Never cover the projector with a blanket or any  
similar item.  
Should anything get inside the projector,  
immediately perform the following steps.  
Turn off the projector.  
Unplug the projector.  
Contact your original dealer or authorized  
CASIO service center.  
1.  
2.  
3.  
• Locate the projector on a firm, flat surface during  
use. Never use the projector while it is on a  
carpet, blanket, towel, seat cushion, or other  
pliable surface.  
• Never stand the projector up on either end during  
use.  
Disassembly and modification  
Never try to take the projector apart or  
modify it in any way. The projector  
contains a large number of high-voltage  
!
components that create the risk of  
electric shock and burn injury. Also, note  
that problems caused by unauthorized  
projector disassembly or modification are  
not covered by the warranty and are not  
eligible for repair by CASIO.  
Be sure to leave all internal inspection, adjustment,  
and repair up to your original dealer or authorized  
CASIO service center.  
E-3  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Safety Precautions  
Projector cabinet  
Unstable location  
Never open the projector’s cabinet.  
Doing so creates the risk of electric  
shock.  
Never place the projector on an unstable  
surface or on a high shelf. Doing so can  
cause it to fall, creating the risk of  
personal injury.  
-
Cleaning  
Using the projector on a base with  
casters  
Whenever using the projector on a base that has  
casters, make sure that you lock the casters when  
not moving the base.  
Before cleaning the projector, be sure to  
turn it off and unplug it from the power  
outlet. Failure to do so creates the risk of  
electric shock.  
$
Exhaust vents  
Lightening  
During a lightening storm, do not touch the plug of  
the projector’s power cord.  
The exhaust vents become very hot while the  
projector is running. Never touch them. Doing so  
creates the risk of burn injury. The areas near the  
exhaust vents also become quite hot. Never locate  
objects made of plastic or other heat-sensitive  
materials near or under the projector. Doing so  
creates the risk of deformation and discoloration of  
the object.  
Remote controller  
Never try to take the remote controller  
apart or modify it in any way. Doing so  
creates the risk of electric shock, burn  
injury, and other personal injury. Be sure  
to leave all internal inspection,  
adjustment, and repair up to your original  
dealer or authorized CASIO service  
center.  
!
Lens cover  
Be sure to remove the lens cover before turning on  
the projector. Never leave the lens cover attached  
while the projector is in use.  
Never allow the remote controller to  
become wet. Water creates the risk of fire  
and electric shock.  
Location  
Never locate the projector in any of the following  
types of locations. Doing so creates the risk of fire  
and electric shock.  
• Near an area subject to strong vibration  
• An area subject to large amounts of moisture or  
dust  
• In a kitchen or other area exposed to oil smoke  
• Near a heater, on a heated carpet, or in an area  
exposed to direct sunlight  
+
Radio waves emitted by the wireless  
adapter (which is provided with or  
built into some projector models)  
Never use this product inside of an  
aircraft or medical facility, or in any other  
location where use of such devices is  
prohibited. Radio waves can have an  
effect on the operation of electronic  
equipment and medical equipment, and  
cause accidents.  
Do not use this product in the vicinity of  
high-precision electronic instruments or  
-
• An area subject to temperature extremes  
(Operating temperature range is 5°C to 35°C  
(41°F to 95°F)).  
Heavy objects  
Never place heavy objects on the projector or  
climb on top of the projector. Doing so creates the  
risk of fire and electric shock.  
-
electronic devices that handle weak radio  
signals. Radio waves can have an effect  
on the operation of such equipment, and  
cause accidents.  
Water  
Never locate the projector in a bathroom or  
anywhere else there is the chance that it will be  
splashed with water.  
• If you are using a pace maker or any other  
electronic medical device, be sure to consult  
your physician or device manufacturer before  
using this product.  
E-4  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Safety Precautions  
Battery Precautions  
*Caution  
Power cord  
Warning  
*
Misuse of the power cord creates the risk Misuse of batteries can cause them to leak and  
of fire and electric shock. Make sure that stain the area around them, or to explode, creating  
-
you always observe the following  
precautions.  
• Do not locate the power cord near a stove.  
• When unplugging the power cord, always grasp  
the plug, and do not pull on the power cord.  
• Insert the plug into the power outlet as far as it  
will go.  
the risk of fire and personal injury. Make sure that  
you always observe the following precautions.  
• Never try to take batteries apart and do  
not allow them to become shorted.  
-
• Never expose batteries to heat or throw  
them into fire.  
• Never mix old batteries and new ones.  
• Never mix batteries of different types.  
• Never try to charge batteries.  
• After using the projector, unplug it from the  
power outlet.  
• Unplug the projector from the power outlet if you  
do not plan to use it for a long time.  
• At least once a year, unplug the power plug and  
use a dry cloth or vacuum cleaner to clear dust  
from the area around the prongs of the power  
plug.  
• Never use detergent to clean the power cord,  
especially the power plug and jack.  
• Before moving the projector, be sure to turn it off  
and unplug it from the power outlet first.  
• Take care that batteries are oriented  
correctly when you load them.  
+
*Caution  
Misuse of batteries can cause them to leak and  
stain the area around them, or to explode, creating  
the risk of fire and personal injury. Make sure that  
you always observe the following precaution.  
• Use only the type of batteries that is  
Backup of important data  
Be sure to keep separate written records  
of all data stored in projector memory.  
specified for the remote controller.  
-
Dead batteries  
+
Lens effect  
Memory data can be lost due to  
breakdown, maintenance, etc.  
Be sure to remove batteries from the remote  
controller as soon as they go dead.  
Never have an aquarium or any other object that  
produces a lens effect in front of the projector  
while the light source unit is on. Such an object  
creates the risk of fire.  
• Remove batteries from the remote  
controller if you do not plan to use it for a  
+
Disposing of batteries  
long time.  
Lens  
Never touch the lens with your hand.  
Make sure that you dispose of used batteries in  
accordance with the rules and regulations in your  
local area.  
Wireless adapter (provided with or  
built into some projector models)  
Keep the wireless adapter out of the  
reach of small children. Accidental  
swallowing of a wireless adapter can  
interfere with proper breathing and create  
a life-threatening situation.  
-
E-5  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Safety Precautions  
Lens Cover  
Warning  
*
The lens cover of this Data Projector uses  
a magnetic attachment. Because of this,  
it should not be used in the vicinity of  
anyone wearing a pacemaker or any  
other electric medical device. Should any  
problem arise, move the lens cover away  
from the person experiencing the  
+
problem and consult a physician.  
*Caution  
Keep the lens cover away from floppy  
disks, magnetic cards, magnetic tapes,  
prepaid cards, checks, and any other  
media that uses magnetic recording. The  
lens cover can corrupt data recorded on  
magnetic media.  
-
Other  
*Caution  
Allowing dust to build up inside the projector for  
long periods without cleaning creates the risk of  
fire and breakdown. Contact your original dealer or  
authorized CASIO service center once a year about  
having the interior of the projector cleaned. Note  
that you will be charged for cleaning.  
E-6  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Operating Precautions  
About the Light Source Unit  
The projector’s light source unit uses a laser and LED.  
The life of the light source unit is rated at approximately 20,000 hours. The actual life will depend on  
use conditions, the settings configured on the setup menu, and differences between each individual  
light source unit.  
The light source unit is warranted for the period noted on the warranty certificate or for 6,000 hours,  
whichever comes first.  
The failure of the light source unit to light or a noticeable drop in light source unit brightness indicates  
the end of the light source unit’s life. Contact your original dealer or authorized CASIO service center  
for replacement.  
Other Precautions  
This projector is made of precision components. Failure to observe the following precautions can result  
in inability to correctly save data and malfunction.  
Never use or store the projector in the following locations. Doing so creates the  
risk of malfunction of and damage to the projector.  
Locations subjected to electrostatic charge  
Locations subjected to temperature extremes  
Locations where there is extreme moisture  
Locations subjected to sudden temperature changes  
Locations where there is a lot of dust  
On a shaky, slanted, or otherwise unstable surface  
Locations where there is the danger of getting wet  
Avoid using the projector under the following conditions. Such conditions  
create the risk of malfunction of and damage to the projector.  
Avoid areas subject to temperature extremes (operating temperature  
range is 5°C to 35°C (41°F to 95°F)).  
Never place heavy objects on the projector or climb on top of the  
projector.  
Never insert or allow foreign objects to drop into the projector.  
Never place a vase or any other container of water on top of the  
projector.  
Never leave a dead battery inside the remote controller for a long time.  
A dead battery can leak, which leads to malfunction of and damage to the remote controller.  
Clean with a soft, dry cloth.  
When very dirty, use a soft cloth that has been dampened in a weak solution of water and a mild neutral  
detergent. Wring all excess water from the cloth before wiping. Never use thinner, benzine, or any other  
volatile agent to clean the projector. Doing so can remove its markings and cause staining of the case.  
Missing Screen Dots  
Though this projector is manufactured using the most advanced digital technology available today, some  
of the dots on the screen may be missing. This is normal, and does not indicate malfunction.  
E-7  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Operating Precautions  
Never subject the projector to strong impact while it is projecting.  
If the projector is accidentally subjected to strong impact, the projection image will momentarily go  
blank. The image will reappear after some time, but it may be the wrong color or it may be accompanied  
by an error message.  
If the projected image is the wrong color, re-select the current input source. If this does not return the  
projected image to its proper color, use the procedure under “To turn off the projector” on page E-20 to  
turn projector power off and then back on again.  
If the image reappears with an error message, correct the problem in accordance with the indicator  
explanations under “Error Indicators and Warning Messages” in the User’s Guide on the CD-ROM that  
comes with the projector.  
Keystone Correction and Image Quality  
Performing keystone correction causes the image to be compressed before it is projected. This can  
result distortion of the image or a loss of image quality. If this happens, change orientation of the  
projector and/or screen so it conforms as much as possible to the illustration under “Setting Up the  
Projector” on page E-14.  
If image quality is the highest priority, turn off auto keystone correction and position the projector so it is  
pointed straight at the screen.  
Even if your projector is still within the warranty period, you will be charged for repair if a problem is  
due to running the projector non-stop for very long periods (like 24 hours) or if the projector was set up  
and used without following the “Setup Precautions” on page E-15 of this manual.  
Precaution when Handling the Projector after Use  
The projector’s exhaust vents and the area around the vents  
become very hot during operation, and will still be hot immediately  
after turning off the projector. Because of this, you should hold the  
sides of the projector as shown in the illustration whenever  
moving it.  
Stowing the Projector in the Carrying Bag  
Make sure the projector is no longer warm before stowing it in the carrying bag.  
E-8  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Unpacking  
As you unpack the projector, check to make sure that all of the items listed below are present.  
DATA PROJECTOR  
Remote Controller  
(YT-100)  
Test Batteries  
(AAA-size × 2)  
AC Power Cord  
• Carrying Bag  
Special AV Cable  
Mini D-Sub Cable  
• CD-ROM  
• User’s Guide (Basic Operations)  
• “Read this first” Sheet  
• Warranty  
• Wireless adapter (Provided with or built into models equipped with USB ports only.)  
Using the CD-ROM  
What you need to do to use the CD-ROM that comes with the projector depends on your projector  
model.  
Using the CD-ROM that comes with the XJ-A130V,  
XJ-A140V, XJ-A150V, XJ-A230V, XJ-A240V, XJ-A250V  
The CD-ROM that comes with the projector has a PDF file “User’s Guide” that contains detailed  
explanations about projector operations. In order to read the User’s Guide, you need to have Adobe®  
Reader® installed on your computer.  
To read the User’s Guide contents  
1. Place the bundled CD-ROM into your computer’s CD-ROM drive.  
2. Navigate to the CD-ROM, and open the “User’s Guide” folder.  
3. Double-click “UsersGuide_English.pdf”.  
This starts up Adobe Reader and displays the contents of the manual whose icon you clicked.  
On some systems, the “.pdf” extension may not appear at the end of the file name.  
E-9  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Using the CD-ROM  
Using the CD-ROM that comes with the XJ-A135V,  
XJ-A145V, XJ-A155V, XJ-A235V, XJ-A245V, XJ-A255V  
The CD-ROM contains software for each projector model and PDF files with User’s Guides. In order to  
read the User’s Guide, you need to have Adobe® Reader® installed on your computer.  
To view the contents of a User’s Guide (PDF)  
1. Place the CD-ROM that comes with the projector into your computer’s CD-ROM  
drive.  
This will automatically display the CD-ROM menu screen.  
2. On the menu screen, click the [Open Folder] button to the right of the “User’s  
Guide”.  
This will open the “User’s Guide” folder.  
3. In the “User’s Guide” folder, open the “English” folder.  
4. Double-click the name of the manual you want to view.  
The table below describes the contents of the manuals.  
Manual Name  
User’s Guide  
Description  
File Name  
Contains detailed information about the projector. UsersGuide_English.pdf  
USB Function Guide  
Explains operations when connecting USB  
memory, a CASIO Multi Projection Camera  
(YC-400, YC-430), or a graphic scientific calculator  
to the USB port on the back of the projector.  
USB_Guide_English.pdf  
Wireless Function  
Guide  
Explains operations when establishing a wireless  
LAN connection between the projector and a  
computer and projecting the computer’s display  
contents.  
WirelessGuide_English.pdf  
Double-clicking a file name starts up Adobe Reader and displays the contents of the applicable  
manual.  
On some systems, the “.pdf” extension may not be displayed at the end of the file name.  
Installing the Software  
The software described in the table below can be installed from the CD-ROM menu screen that appears  
when you place the CD-ROM that comes with the projector into your computer’s CD-ROM drive. For  
details about installing the software, see the manuals in the “Refer to:” column of the table.  
Software Name  
Description  
Refer to:  
Wireless Connection 3  
Software that makes it possible to establish a Wireless Function Guide  
wireless connection between a projector and (WirelessGuide_English.pdf)  
computer.  
EZ-Converter FA  
Software that converts PowerPoint files to  
ECA files.  
USB Function Guide  
(USB_Guide_English.pdf)  
ArcSoft MediaConverter 3 for Software for converting movie files.  
CASIO Projector  
Multi Projection Camera  
Update Software  
Software for updating the firmware of the  
YC-400 Multi Projection Camera.  
Important!  
The latest version of the computer software included on the CD-ROM that comes with this  
product is available for download at the CASIO website URL below:  
Be sure to download and use the latest version of the software.  
[ Home – Support – Drivers/Downloads – Projectors ]  
E-10  
Download from Www.Somanuals.com. All Manuals Search And Download.  
General Guide  
[Front/Top/Left Side]  
CLASS 1 LASER PRODUCT  
[P] (Power) key  
Wireless adapter cover*  
(XJ-A135V/XJ-A145V/XJ-A155V/  
Key and Indicator Panel  
XJ-A235V/XJ-A245V/XJ-A255V only)  
Intake vents  
Intake vents  
Lens cover  
(Magnetic attachment to projector)  
Projection lens  
Exhaust vents Remote control signal receiver  
* A special-purpose port is located inside the wireless adapter cover for connecting the supplied YW-3  
wireless adapter. For details about the connecting and disconnecting the wireless adapter, see the  
“Wireless Function Guide” on the CD-ROM that comes with the projector.  
[Bottom]  
Release button  
Elevation adjustment foot  
Left, right adjustment feet  
E-11  
Download from Www.Somanuals.com. All Manuals Search And Download.  
General Guide  
[Back, Terminals]  
COMPUTER terminal  
Serial port*  
Speaker  
AV terminal  
Remote control signal receiver  
HDMI port  
Intake vents  
USB port  
(XJ-A135V/XJ-A145V/XJ-A155V/  
XJ-A235V/XJ-A245V/XJ-A255V only)  
Power connector  
Anti-theft lock hole  
* This serial port is for connecting a separately available special cable (YK-5) to control the projector  
from a computer.  
NOTE  
The anti-theft lock hole is provided for connection of an anti-theft chain. Visit the Kensington Lock  
Preparing the Remote Controller  
The remote controller does not come with batteries loaded. You need to load the two supplied batteries  
before use.  
Remote control signal emitter  
[P] (Power) key  
Cursor keys (/ / / )  
E-12  
Download from Www.Somanuals.com. All Manuals Search And Download.  
General Guide  
Loading Remote Controller Batteries  
Important!  
Be sure to use alkaline batteries only.  
RISK OF EXPLOSION IF BATTERY IS REPLACED BY AN INCORRECT TYPE.  
DISPOSE OF USED BATTERIES ACCORDING TO THE INSTRUCTIONS.  
Caution  
*
*
Misuse of batteries can cause them to leak and stain of the area around them, or to  
explode, creating the risk of fire and personal injury. Make sure that you always  
observe the following precautions.  
Take care that batteries are oriented correctly when you load them.  
Never mix old batteries and new ones.  
Caution  
Never mix batteries of different types.  
Use only battery type that is specified for use with the remote controller.  
1. Open the battery cover on the back of 2. Load two new batteries into the case,  
the remote controller.  
making sure that their positive (+) and  
negative (–) ends are facing correctly.  
3. Close the battery cover on the back of the remote controller.  
Replacing Remote Controller Batteries  
Open the battery cover on the back of the remote controller, replace the old batteries with new ones, and  
then close the battery cover.  
Important!  
To avoid running down the batteries, store the remote control unit so its buttons are not  
pressed inadvertently.  
E-13  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Getting Ready  
Setting Up the Projector  
Locate the projector on a desk, table, or stand that is firm and level. Make sure to allow sufficient space  
around the sides and back of the projector for proper ventilation.  
The following illustrations show how the projector should be oriented for optimum projection relative  
to the screen.  
Viewed from the Side  
(XJ-A130V/XJ-A135V/XJ-A140V/  
XJ-A145V/XJ-A150V/XJ-A155V)  
Viewed from Above  
Screen  
Screen  
Make sure the projector is  
at a right angle to the  
screen.  
Viewed from the Side  
(XJ-A230V/XJ-A235V/XJ-A240V/  
XJ-A245V/XJ-A250V/XJ-A255V)  
Screen  
The center of the projector’s lens should be  
aligned with the horizontal center of the screen.  
Position the projector so  
the lens side is at the edge  
of the table, etc.  
Important!  
The projector can be oriented at an angle so its lens is pointing up to 30 degrees upwards (+30°)  
or 30 degrees downwards (–30°).  
Note that orienting the projector at a greater angle will shorten light source unit life and cause  
malfunction.  
There is no limit on how much the projector can be angled horizontally (left and right).  
The projector’s auto keystone correction range is 0 to +30 degrees. If the surface you are  
projecting onto is angled downwards from horizontal, use manual keystone correction (page  
E-22) to correct the image.  
Turn on the “Option Settings 2 High Altitude” setting on the setup menu when using the  
projector in a high altitude (1,500 to 3,000 meters (5,000 to 10,000 feet) above sea level) area  
where air is thin. For details, see the User’s Guide on the CD-ROM that comes with the  
projector.  
NOTE  
The projector can be configured for projection from the back of a screen. For details, see the User’s  
Guide on the CD-ROM that comes with the projector.  
E-14  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Getting Ready  
Setup Precautions  
Note that operating conditions greatly affects the performance of the projector. Make sure you only  
operate the projector in the type of environment described below.  
Use a conveniently located power outlet that you can reach easily when you need to unplug the  
projector.  
Do not place any objects within the area indicated by the dashed line in the illustration below. Keep all  
items at least 30cm (11.8 inches) away from the intake and exhaust vents.  
Allow sufficient clearance and do not  
block intake and exhaust vents.  
Intake vents  
Intake vents  
Exhaust vents  
30cm  
(11.8 inches)  
Intake vents  
The vents become quite hot while the projector is in use. Never touch the vents with your hands. Also,  
the areas near the exhaust vents become quite hot. Never locate objects made of plastic or other  
heat-sensitive materials near or under the projector. Doing so creates the risk of deformation and  
discoloration of the object.  
Avoid placing the projector on a surface that is unstable or prone to vibration. Never place the  
projector on top of a carpet, blanket, towel, or other soft material.  
Do not locate the projector where it will be exposed to direct sunlight.  
Avoid locations where there are large amounts of dust and moisture.  
Keep the projector away from speakers, TVs, radios, and other devices that generate magnetism, as  
well as from heaters.  
Over time, use of the projector can cause dust and dirt to build up in and around the fan’s intake  
vents, which can lead to malfunction of the projector. Be sure to check the intake vents for dust build  
up each time before you use the projector. If you see dirt or dust in or around the intake vents, remove  
it by wiping with a cloth, etc.  
When positioning the projector, make sure you do so in such a way that the intake vents do not  
become blocked. Blocked intake vents can shorten the life of the light source unit.  
Airflow from air conditioning equipment can blow the heat being exhausted from the area around the  
projector’s lens in a way that causes heat ripples to appear in the projected image. If this happens,  
adjust the airflow of the air conditioning equipment or move the projector.  
E-15  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Getting Ready  
Adjusting the Projector Elevation Angle  
You can change the elevation angle of the projector in a range of 0 to 20 degrees. You can also make  
fine adjustments to the left and right side elevation angle when necessary.  
To change the projector elevation angle  
1. Lift up the front of the projector and press  
1
2
the release button .  
This causes the elevation adjustment foot to  
drop from the bottom of the projector.  
Be sure to press the release button before  
trying to lower the elevation adjustment foot.  
Pulling on the foot without pressing the release  
button can damage the foot.  
2. While holding down the release button,  
raise and lower the front of the projector  
until the elevation adjustment foot is  
approximately the length you need.  
3
3. Release the release button to lock the elevation adjustment foot in its current  
position.  
4. Use the left and right adjustment feet to further fine adjust the elevation angle.  
The left and right adjustment feet are for fine adjustment only. Do not try to rotate them too far.  
Doing so can cause an adjustment foot to detach. Tightening an adjustment foot too strongly can  
cause it to become stuck.  
Important!  
To retract the elevation adjustment foot, hold down the release button and slide the elevation  
adjustment foot back into the projector. Never try to forcibly change the elevation adjustment  
foot position without pressing the release button.  
E-16  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Getting Ready  
Connecting a Computer to the Projector  
You can use the projector to project an image of analog RGB output from a computer.  
Important!  
Always turn off the projector and the computer before connecting them.  
Take care so the volume level of the computer is not set too high.  
<Projector>  
<Computer>  
AV terminal  
COMPUTER terminal  
To monitor terminal  
To line output terminal  
(analog RGB output terminal)  
Bundled mini D-Sub cable  
Audio cable (commercially available)  
Connecting to a Standard Video Device  
You can use the projector to project an image from a video deck, TV, video camera, or other video  
device.  
Important!  
Always turn off the projector and the video device before connecting them.  
<Projector>  
<Video device>  
AV terminal  
To VIDEO output terminal  
Yellow  
To AUDIO output terminals  
Red  
White  
Bundled special AV cable  
You can use the bundled special AV cable to connect to a pin jack (RCA) type VIDEO output terminal.  
When connecting a video camera or other video device with a special video output terminal, use the  
special cable that comes with the video device. For details, see the documentation that comes with  
the video device.  
NOTE  
For details about the following types of connections, see the User’s Guide on the CD-ROM that comes  
with the projector.  
Projector and component video output of video device  
Projector and HDMI output of video device or computer  
E-17  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Getting Ready  
Turning On the Projector  
Before performing any of the operations in this section, make sure you first set up the projector and  
connect to an output device.  
AC Power Cord Precautions  
Use the AC power cord that comes with the projector.  
Make sure that you use a power source with the same voltage as that specified for the projector.  
Do not share the outlet supplying power to the projector with other devices. If you are using an  
extension cord, make sure that the ampere rating of the extension cord is compatible with the power  
consumption value of this projector.  
Never use the power cord while it is still bundled together.  
Never place objects on top of the power cord and do not step on it.  
Never pull on the power cord. When unplugging it, grasp the plug.  
Use a conveniently located power outlet that you can reach easily when you need to unplug the  
projector.  
If you need more information about the power supply, contact your original dealer or authorized  
CASIO service center.  
To turn on the projector  
1. Use the bundled AC power cord to plug the  
Power supply connector  
projector into a power outlet.  
Plugging into a power outlet causes the three  
indicators on the top of the projector to light  
amber. After a short while, two of the indicators  
will go out and only the POWER/STANDBY  
indicator will remain lit amber, which indicates the  
standby state.  
Note that the projector will not turn on if you  
press the [P] (Power) key while all three  
indicators are lit amber. Wait until the projector is  
in the standby state before trying to turn it on.  
Bundled AC power cord  
The shape of the plug  
depends on your  
geographical area.  
NOTE  
This product is also designed for IT power distribution system with phase-to-phase voltage 230V.  
2. Turn on the computer or video device that is connected to the projector.  
3. If the projector lens cover is covering the lens, remove it.  
4. Press the [P] (Power) key.  
This causes the POWER/STANDBY indicator to flash green.  
Within a few seconds, POWER/STANDBY indicator stops flashing and remains lit green, and the  
projector starts projecting an image from the device connected to it.  
A “Language” window will be projected the first time you turn on the projector. Use the procedure  
under “Specifying the Display Message Language” on the page E-19 to configure the language  
settings.  
NOTE  
If the Eco Mode is turned on, the LIGHT indicator will light green when the projector is turned on.  
E-18  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Getting Ready  
Specifying the Display Message Language  
A “Language” window will be projected the first time you turn on the projector. Use the menu on this  
screen to specify the display language you want to use.  
1. Use the cursor [] and [] keys to highlight the language you want to use.  
2. Press the [ENTER] key.  
E-19  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Getting Ready  
Turning Off the Projector  
Caution  
The projector may remain quite hot for a while after you turn it off. Take care when moving the  
projector or otherwise handling it after use. See “Precaution when Handling the Projector after  
Use” (page E-8) for more information.  
Make sure that the projector is cooled down sufficiently before storing it.  
To turn off the projector  
1. Press the [P] (Power) key.  
This causes the confirmation message “Do you want to turn off the projector?” to appear in the  
center of the projection screen.  
If you do not turn off the projector the confirmation message will disappear automatically after  
about 10 seconds. The confirmation message will also disappear if you press the [ESC] key.  
2. To turn off the projector, press the [P] (Power) key again in response to the  
confirmation message.  
This causes the projector light source unit to go out and stops projection.  
3. After checking to make sure that the POWER/STANDBY indicator has stopped  
flashing amber and remains lit, unplug the AC power cord from the power outlet.  
This causes the POWER/STANDBY indicator to go out.  
4. After ensuring that the projector and the connected computer or video device are  
turned off, disconnect the connecting cables from the projector and the connected  
device.  
5. Close the lens cover.  
NOTE  
You can turn off the projector by simply unplugging the power cord without pressing the [P] (Power)  
key (Direct Power Off). Note, however, that doing so while Zoom Memory (Option Settings 2 Zoom  
Memory) is enabled will not save the current projection size setting. For more information, see the  
User’s Guide on the CD-ROM that comes with the projector.  
The projector turns off automatically after a certain amount of time of key operation and input signal  
inactivity (Auto Power Off). The Auto Power Off trigger time can be specified on the setup menu. The  
initial default setting is 10 minutes.  
E-20  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Projector Basics  
Selecting the Input Source  
Turning on the projector initially causes the same input source that was selected the last time it was  
turned off to be selected. You can perform the following steps to select a different input source.  
1. Press the [INPUT] key.  
This displays the input source selection screen.  
2. Use the [] and [] keys to select the name of the input source you want to select  
and then press the [ENTER] key.  
The name of the input source you select appears in the upper right corner of the projection screen  
for a few seconds.  
The message “No signal input.” will appear if no input signal can be selected.  
Important!  
Resolution  
Depending on the projector model, its video resolution will be fixed at XGA (1024 × 768 pixels) or  
WXGA (1280 × 800 pixels). Images may appear coarse, text and other figures may be difficult to  
read or a moire pattern may appear when the input signal from a computer does not match the  
projector’s video resolution. If this happens, try doing the following.  
Change the computer’s output resolution setting so it matches the projector’s video  
resolution.  
For information about the video resolution of your projector, see the “DLP chip” item of the  
“Specifications” (page E-28). See the user documentation that comes with your computer for  
details about changing its settings.  
Change the “Aspect Ratio” setting to “True” (Applies only to models that support WXGA  
video resolution).  
With the “True” setting, the projector projects the input signal at its actual size (1 input  
source dot equal to one projector output pixel dot).  
For information about configuring the Aspect Ratio setting, see “Changing the aspect ratio of  
the projected image” in the User’s Guide on the CD-ROM that comes with the projector.  
Adjusting the Projected Image  
To adjust the size of the projected image  
Hold down the [ZOOM +] key to increase the size of the image or the [ZOOM –] key to decrease it. When  
the image is the size you want, release the key.  
Projector key operation  
Press the [ZOOM] key and then hold down the [I] or [q] key to increase the size of the image, press  
the [ZOOM] key and then hold down the [U] or [w] key to decrease it. When the image is the size you  
want, release the key.  
To adjust image focus  
Hold down the [FOCUS ] or [FOCUS ] key. When the focus is the way you want, release the key.  
Projector key operation  
Press the [FOCUS] key and then hold down the [U] ([w]) or [I] ([q]) key to focus. When focus is the  
way you want, release the key.  
E-21  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Projector Basics  
Auto Adjustment of an RGB Image  
The projector automatically adjusts vertical and horizontal positioning, frequency, and phase whenever it  
starts projecting an RGB signal (following input source selection, power up, etc.). You can also execute  
an automatic adjustment operation by pressing the [AUTO] key when the input source is RGB.  
NOTE  
When you want to disable auto adjustment and maintain manual settings, you can turn off auto  
adjustment by selecting “Off” for the “Option Settings 1 Auto Adjust” setting on the setup menu.  
The projected image may become distorted while an auto adjustment operation is in progress.  
If an image is unclear following the auto adjustment operation, you can use the menu to adjust items  
manually.  
Keystone Correction (KEYSTONE)  
When the projector is at an angle to the screen it is projecting on, the projected image may have different  
length top and bottom edges. This phenomenon is called, “keystoning”. This projector comes with  
functions for automatic as well as manual keystone correction, which provides a regularly shaped  
projected image.  
Important!  
Keystone correction can cause the corrected image to be smaller than the original  
(uncorrected) image, or it can cause distortion of the image. If the projected image becomes  
difficult to view, try moving the screen and/or projector so they are oriented close to the  
configuration shown under “Setting Up the Projector” on page E-14.  
The projector does not support horizontal keystone correction. The center of the projector’s  
lens should be aligned with the horizontal center of the screen (page E-14).  
Automatic Keystone Correction  
When “On” is selected for the “Option Settings 1 Auto Keystone  
Correction” setting on the setup menu, the projector will detect the  
vertical orientation of the object in the image and adjust its shape  
automatically so it appears as a rectangle. The message “Auto  
Keystone Corrected.” appears in the center of the projected image  
when the projector performs auto keystone correction.  
The projector’s auto keystone correction range is 0 to +30  
degrees. If the surface you are projecting onto is angled downwards from horizontal, use manual  
keystone correction to correct the image.  
NOTE  
Auto keystone correction is performed by detecting the elevation angle of the projector. This means  
that the surface you are projecting onto needs to be standing straight up. If the surface you are  
projecting onto is not straight, use manual keystone correction to correct the image.  
To use manual keystone correction  
1. Press the [KEYSTONE +] or [KEYSTONE –] key.  
This causes the keystone correction screen to appear on the projected image.  
2. Use the [KEYSTONE +] and [KEYSTONE –] keys to correct for keystoning.  
Correction can be performed for keystoning within 30°.  
3. To close the setup screen, press the [ESC] key.  
E-22  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Using the Setup Menu  
Pressing the [MENU] key while an image is being projected displays the setup menu on the projected  
image. The setup menu can be used to configure a variety of different projector settings. Use the cursor  
keys []/[]/[]/[] and [ENTER] key to select and configure settings.  
For detailed information about settings and how they are configured, see the User’s Guide  
(UsersGuide_English.pdf) on the CD-ROM that comes with the projector.  
If your projector is equipped with a USB port, see the user documentation on the CD-ROM that comes  
with it for information about the “USB” main menu item (USB Function Guide) and the “Wireless” main  
menu item (Wireless Function Guide).  
Setup Menu List  
Main menu  
Sub-menu  
Brightness  
Main menu  
Sub-menu  
Image  
Adjustment 1  
Option Settings 1 Auto Keystone Correction  
Auto Adjust  
Contrast  
Sharpness  
Eco Mode  
Saturation  
Auto Power Off  
Tint  
Power On Password  
Direct Power On  
Color Mode  
Color Balance  
Eco Off Mode  
Language  
Restore Menu Defaults  
Option Settings 2 Zoom Memory  
Pointer  
Restore Menu Defaults  
Vertical Position  
Horizontal Position  
Frequency  
Image  
Adjustment 2  
Plug and Play  
(USB port models only)  
USB Audio Out  
(USB port models only)  
Phase  
Restore Menu Defaults  
Volume  
HDMI Audio Out  
High Altitude  
Volume  
Adjustment  
Restore Menu Defaults  
Keystone Correction  
Aspect Ratio  
Restore Menu Defaults  
Screen Settings  
USB (USB port models only)  
Wireless (USB port models only)  
Projection Mode  
Ceiling Mount  
Startup Screen  
No Signal Screen  
Blank Screen  
Operational Info  
Input Signal  
Signal Name  
Resolution  
Horizontal Frequency  
Vertical Frequency  
Scan System  
Restore Menu Defaults  
COMPUTER Terminal  
Video Signal  
Input Settings  
Light Time  
Restore All  
Defaults  
Unit Operating Time  
Restore All Defaults  
Signal Name Indicator  
Restore Menu Defaults  
E-23  
Download from Www.Somanuals.com. All Manuals Search And Download.  
User Maintenance  
Cleaning the Projector  
Periodically clean the projector exterior, lens, intake vents, and exhaust vents on a regular basis.  
Cleaning Intake and Exhaust Vents  
Dust and dirt tend to collect around the intake vents. Because of this, you should use a vacuum cleaner  
to clean away accumulated dust and dirt periodically.  
Important!  
Continued use of the projector after dust has accumulated around the intake vents can cause  
overheating of internal components and lead to malfunction.  
Certain operating conditions also can cause dirt and dust to accumulate around the projector’s  
exhaust vents on the front. If this happens, use the same procedure as that described above to  
clean the exhaust vents.  
About the Light Source Unit  
Should the light source unit stop working, contact your original dealer or authorized CASIO service  
center for replacement. Note that problems caused by unauthorized projector disassembly or  
modification are not covered by the warranty and are not eligible for repair by CASIO.  
Troubleshooting  
Indicators  
Indicators keep you informed about the current operational status of the projector. The following shows  
what the indicators look like when operation is normal.  
When this indicator:  
POWER :  
TEMP :  
LIGHT :  
POWER :  
Is this:  
Amber steady  
Amber steady  
Amber steady  
Amber steady  
It means this:  
You have just plugged the AC power cord into a power  
outlet. Wait until the projector enters the standby state  
(see below) before trying to turn on power.  
Standby state: The AC power cord is plugged in and the  
projector is in standby.  
POWER :  
POWER :  
POWER :  
LIGHT :  
Green flashing  
Green steady  
Amber flashing  
Green steady  
Projector is warming up after being turned on.  
Projector is on and standing by for use.  
Projector is performing internal power down processes.  
The projector’s Eco Mode is turned on.  
When a warning message appears on the projection screen, or when the POWER, TEMP, and LIGHT  
indicators are lit or flashing in a pattern other than those shown above, it means that a projector error  
has occurred. For details about indicators and warning messages, see the User’s Guide on the  
CD-ROM that comes with the projector.  
E-24  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Troubleshooting  
Projector Troubleshooting  
Check the following items whenever you experience any problem with the projector.  
Problem  
Cause and Recommended Action  
See  
The projector does not  
If the POWER/STANDBY indicator is not lit, the AC power  
page E-18  
turn on when I press the cord may not be connected correctly.  
[P] (Power) key.  
Make sure the AC power cord is connected  
correctly to the projector and the power outlet (see  
“Turning On the Projector”).  
If the TEMP or LIGHT indicator remains flashing or lit, it  
means some type of error has occurred.  
See “Error Indicators and Warning Messages”.  
User’s Guide  
(UsersGuide_  
English.pdf)  
The projector does not  
The connected computer or video device may not be  
project any image from turned on, or it may not be outputting a video signal.  
the connected device.  
Make sure the connected computer or video  
device is turned on, and perform the required  
operation on it to output a video signal.  
The correct input source is not selected on the projector.  
page E-21  
page E-17  
On the projector, select the input source that  
corresponds to the device whose image you are  
trying to project (see “Selecting the Input Source”).  
Images may not project correctly when you have the  
component output terminal of a video device connected to  
the COMPUTER terminal of the projector.  
The projector does not  
correctly project the  
image from the  
connected video device.  
Try using the projector’s AV terminal (see  
“Connecting to a Standard Video Device”).  
When RGB/Component The wrong option (“Component” or “RGB”) may be  
is selected as the input selected for the “Input Settings COMPUTER Terminal”  
source, the color of the setting on the setup menu. The image will not be projected  
User’s Guide  
(UsersGuide_  
English.pdf)  
projected image or the  
correctly if “Component” is selected while the projector’s  
image itself is abnormal. COMPUTER terminal is connected to the RGB output  
terminal of a computer, or if “RGB” is selected while the  
projector’s COMPUTER terminal is connected to the  
component video output terminal of a video device.  
Use the setup menu to change the “Input  
Settings COMPUTER Terminal” setting to  
“Auto” to correct the problem.  
I can’t understand  
messages or menus  
because they are the  
wrong language.  
Perform the following operation to select the language you  
want.  
User’s Guide  
(UsersGuide_  
English.pdf)  
1. Press the [MENU] key to display the setup menu.  
2. If the input signal is HDMI, press [] four times and then  
press the [ENTER] key. If the input signal is not HDMI,  
press [] five times and then press the [ENTER] key.  
3. Display the language selection menu.  
If the input signal is RGB, press [] six times and then  
press the [ENTER] key.  
If the input signal is not RGB, press [] five times and  
then press the [ENTER] key.  
4. Use the [] and [] keys to move the highlighting to the  
language you want to select and then press the [ENTER]  
key.  
5. Press the [MENU] key to exit the setup menu.  
E-25  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Troubleshooting  
Problem  
Cause and Recommended Action  
See  
No sound comes out of The projector’s volume level setting may be too low or  
User’s Guide  
(UsersGuide_  
English.pdf)  
the projector after I  
connect it to another  
device.  
muted.  
Press the remote controller [VOLUME] key and use  
[] and [] to adjust the volume level.  
The volume level setting of the device connected to the  
computer may be too low or the other device is not  
outputting audio.  
Device user  
documentation  
Adjust the volume level of the connected device.  
The audio output of the connected device may not be  
connected correctly to the projector’s AV terminal.  
Refer to one of the following (depending on the  
type of connected device) to check the  
connection.  
“Connecting a Computer to the Projector”  
“Connecting to a Standard Video Device”  
page E-17  
page E-17  
“Connecting to a Component Video Output  
Device”  
User’s Guide  
(UsersGuide_  
English.pdf)  
When a video device’s or computer’s HDMI output is  
User’s Guide  
connected to the HDMI port of the projector, “Line” may be (UsersGuide_  
selected for the “Option Settings 2 HDMI Audio Out”  
English.pdf)  
setting on the setup menu.  
Change the “HDMI Audio Out” setting on the setup  
menu to “Speaker”.  
The color of the  
projected image is  
strange.  
The input signal may not match projector settings. Try  
doing the following.  
Use the [BRIGHT] key to adjust image brightness.  
User’s Guide  
(UsersGuide_  
English.pdf)  
Use the [COLOR MODE] key to change the color  
mode.  
On the setup menu, use the “Image Adjustment 1  
Color Balance” setting to adjust the color balance.  
Text in the projected  
image is broken up.  
The image may be out of focus.  
On the remote controller, use the [FOCUS ] and  
[FOCUS ] keys to adjust image focus.  
If text is broken up even though the image is in focus and  
the input source is RGB, the projector’s frequency and/or  
phase setting may not be compatible with the input signal.  
page E-21  
page E-22  
User’s Guide  
(UsersGuide_  
English.pdf)  
Press the [AUTO] key to execute an automatic  
adjustment operation. If this does not correct the  
problem, use the setup menu to adjust the “Image  
Adjustment 2 Frequency” and “Image  
Adjustment 2 Phase” settings manually.  
If the input source is a video camera or document camera,  
check to make sure there is no problem with the input  
source device.  
Device user  
documentation  
The message “Please  
input the password.”  
appears and further  
operation is not  
The “Option Settings 1 Power On Password” setting on  
the setup menu is turned on, so the projector is password  
protected.  
Input the correct password, and then press the  
[ENTER] key.  
User’s Guide  
(UsersGuide_  
English.pdf)  
possible.  
E-26  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Troubleshooting  
Problem  
Cause and Recommended Action  
See  
The remote controller  
does not work.  
The remote controller batteries may be dead.  
Replace the batteries (see “Replacing Remote  
Controller Batteries”).  
page E-13  
The remote controller may be too far from the projector.  
Make sure the remote controller is within the  
allowable range when you operate it.  
User’s Guide  
(UsersGuide_  
English.pdf)  
The TEMP or LIGHT  
indicator is flashing or  
lit.  
See “Error Indicators and Warning Messages”.  
User’s Guide  
(UsersGuide_  
English.pdf)  
Light source unit does  
not light.  
The light source unit may be defective.  
Contact your original dealer or authorized CASIO service center for  
replacement.  
Important!  
Try performing the following steps, which may or may not return the projector to normal  
operation.  
1. Unplug the AC power cord and wait for at least 10 minutes.  
2. Plug the power cord back in and turn the projector back on again.  
If normal operation does not resume after you perform the above steps, take the projector to  
your retailer or authorized CASIO service center.  
E-27  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Specifications  
XJ-  
XJ-  
XJ-  
XJ-  
XJ-  
XJ-  
XJ-  
XJ-  
XJ-  
XJ-  
XJ-  
XJ-  
Model Name  
A130V A135V A230V A235V A140V A145V A240V A245V A150V A155V A250V A255V  
Brightness  
(ANSI Lumens)  
2000  
2500  
DLP  
3000  
*
1
Projection System  
Size: 0.55 inch, Size: 0.65 inch, Size: 0.55 inch, Size: 0.65 inch, Size: 0.55 inch, Size: 0.65 inch,  
Number of  
Pixels: XGA  
(1024 × 768)  
Number of  
Pixels: WXGA  
(1280 × 800)  
Number of  
Pixels: XGA  
(1024 × 768)  
Number of  
Pixels: WXGA  
(1280 × 800)  
Number of  
Pixels: XGA  
(1024 × 768)  
Number of  
Pixels: WXGA  
(1280 × 800)  
DLP chip  
Projection Lens  
Light Source  
Optical 2X zoom, electric focus  
Laser and LED  
COMPUTER  
terminal  
RGB mini D-Sub 15-pin × 1  
(Also used as component signal input terminal.)  
Audio (stereo) input/output and video input, 3.5mini jack × 1  
HDMI TYPE A port × 1  
AV terminal  
HDMI port  
USB TYPE A port  
Serial port  
No  
Yes  
No  
Yes  
No  
Yes  
No  
Yes  
No  
Yes  
No  
Yes  
For RS-232C control, special terminal × 1  
Wireless LAN  
adapter  
*2  
*3  
*2  
*3  
*2  
*3  
*2  
*3  
*2  
*3  
*2  
*3  
Operating Temperature: 5 to 35°C (41 to 95°F)  
Operating Humidity: 20 to 80% (non-condensation)  
Operating Altitude: 0 to 3,000 meters (0 to 10,000 feet) above sea level  
Environment  
Power  
Requirements 100-240V AC, 50/60Hz, 3.3A-1.4A  
Approximate  
Dimensions  
297 (W) × 210 (D) × 43 (H) mm  
(11.7" × 8.3" × 1.7")  
Weight  
Approximately 2.3kg (5.1Ibs)  
English, French, German, Italian, Spanish, Swedish,  
Chinese (Simplified), Chinese (Traditional), Korean, Japanese  
Display Languages  
*1: Compliance with ISO21118-2005  
*2: Not supported  
*3: Included (Connect to projector’s special YW-3 port.)  
CASIO COMPUTER CO., LTD. makes no guarantees concerning the operation or suitability of any  
USB device that you connect to the projector’s USB port.  
Specifications are subject to change without notice.  
E-28  
Download from Www.Somanuals.com. All Manuals Search And Download.  
ENGLISH  
Disposal of Waste Electrical & Electronic Equipment of  
products for Household use  
(Applicable in the European Union only)  
The symbol (crossed out wheeled-bin) on your product indicates that  
the product shall not be mixed or disposed with your household  
waste, at their end of use.  
This product shall be handed over to your local community waste  
collection point for the recycling of the product.  
For more information, please contact your Government  
Waste-Disposal department in your country.  
Inappropriate waste handling could possibly have a negative effect  
on the environment and human health due to potential hazardous  
substances. With your cooperation in the correct disposal of this  
product, you contribute to reuse, recycle and recover the product and  
our environment will be protected.  
Disposal of Waste Electrical & Electronic Equipment of  
products for business use  
(Applicable in the European Union only)  
For further information regarding the disposal of products for  
business purposes, please contact your dealer or distributor in your  
country. This product shall not be mixed or disposed with commercial  
waste.  
Deutsch  
Français  
Entsorgung von elektrischen & elektronischen Produkten für  
den Haushaltsgebrauch  
Traitement des appareils électriques et électroniques en fin de  
vie par les particuliers  
(anzuwenden nur in den Ländern der Europäischen Union)  
(Applicable dans les pays de l’Union Européenne seulement)  
Dieses Symbol (ausgekreuzte Mülltonne) auf dem Produkt  
bezeichnet, dass Altgeräte usw.  
nicht wie normaler Haushaltsabfall in den Müll gegeben werden  
dürfen, sondern zum Recycling an einer hierfür vorgesehenen  
Annahmestelle abzugeben ist.  
Ce symbole (poubelle interdite) apposé sur le produit indique qu’en  
fin de vie ce produit ne doit pas être traité avec les déchets  
ménagers.  
Il doit être remis à un point de collecte approprié pour le recyclage  
des appareils électriques et électroniques.  
Für nähere Informationen wenden Sie sich bitte an die für  
Müllentsorgung zuständigen örtlichen Behörden.  
Pour de plus amples informations, veuillez contacter le service de  
collecte des déchets ménagers local.  
Ce produit contient des substances potentiellement dangereuses qui  
peuvent avoir des effets néfastes sur l’environnement et la santé  
humaine. En veillant à la mise au rebut correcte de ce produit, vous  
contribuerez à assurer le traitement, la récupération et le recyclage  
de ce produit et à protéger l’environnement.  
Bei unsachgemäßer Entsorgung besteht das Risiko nachteiliger  
Auswirkungen auf Umwelt und Gesundheit durch potentiell  
gefährliche Substanzen. Durch Ihre Kooperation zur  
ordnungsgemäßen Entsorgung fördern Sie die Wiederverwendung,  
das Recycling und die Rückgewinnung von Stoffen und tragen zum  
Umweltschutz bei.  
Traitement des appareils électriques et électroniques en fin de  
vie par les enterprises  
(Applicable dans les pays de l’Union Européenne seulement)  
Entsorgung von elektrischen & elektronischen Produkten durch  
gewerbliche Benutzer  
(anzuwenden nur in den Ländern der Europäischen Union)  
Pour de plus amples informations sur la collecte des déchets des  
professionnels, veuillez contacter votre revendeur ou distributeur  
local. Ce produit ne doit pas être traité avec les déchets  
d’entreprises.  
Für nähere Informationen zur Entsorgung durch gewerbliche  
Benutzer wenden Sie sich bitte an Ihren Händler oder den  
zuständigen Vertrieb. Das Produkt darf nicht in den normalen  
Gewerbemüll gegeben werden.  
Italiano  
Español  
Smaltimento di rifiuti costituiti da prodotti elettrici e elettronici  
per uso domestico  
(applicabile soltanto nell’Unione Europea)  
Disposición sobre Residuos de aparatos eléctricos y  
electrónicos para los productos de uso doméstico  
(Aplicable sólo a la Unión Europea)  
Il simbolo (un bidone con ruote sbarrato da una croce) sul prodotto  
indica che il prodotto non deve essere mescolato o smaltito con i  
rifiuti domestici, alla fine della sua durata.  
Los productos identificados con este símbolo (papelera tachada) no  
deben eliminarse como residuos domésticos una vez finalizada su  
vida útil.  
Questo prodotto deve essere consegnato al punto di raccolta rifiuti  
della propria comunità locale per il suo riciclaggio.  
Este producto debe entregarse a un punto de recogida de la  
comunidad local para su recuperación y reciclado.  
Per ulteriori informazioni, rivolgersi all’organo statale preposto allo  
smaltimento dei rifiuti nel proprio paese.  
Uno smaltimento dei rifiuti inappropriato può avere effetti negativi  
sull’ambiente e sulla salute umana a causa di sostanze  
potenzialmente pericolose. Collaborando allo smaltimento corretto di  
questo prodotto, si contribuisce al riutilizzo, al riciclaggio e al  
recupero del prodotto, e alla protezione del nostro ambiente.  
Para mayor información, sírvase ponerse en contacto con el  
Departamento de Disposición de Desechos de su Ayuntamiento.  
El manejo inadecuado de los residuos supone riesgos para la salud  
humana o el medio ambiente. Con la reutilización, el reciclado de los  
materiales u otras formas de valorización de tales productos usted  
contribuye de manera importante a la protección de nuestro medio  
ambiente.  
Smaltimento di rifiuti costituiti da prodotti elettrici e elettronici  
per uso commerciale  
Disposición de Residuos aparatos eléctricos y electrónicos  
para los productos de uso comercial  
(applicabile soltanto nell’Unione Europea)  
(Aplicable sólo a la Unión Europea)  
Per ulteriori informazioni riguardanti lo smaltimento di prodotti per  
uso commerciale, rivolgersi al proprio rivenditore o distributore nel  
proprio paese. Questo prodotto non deve essere mescolato o  
smaltito con i rifiuti commerciali.  
Para mayor información sobre la disposición de productos para fines  
comerciales, sírvase ponerse en contacto con el concesionario o  
distribuidor de su país. Este producto no deber mezclarse ni  
desecharse junto con los residuos comerciales.  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Nederlasnds  
Afvalverwijdering van Elektrische & Elektronische Apparatuur  
voor Huishoudelijk Gebruik  
(Alleen van toepassing in de Europese Unie)  
Het symbool (doorgekruisde afvalbak op wielen) op het product geeft  
aan dat het product aan het einde van haar levensduur niet samen  
met of in de vorm van huishoudafval mag worden weggegooid.  
Het product moet naar een verzamelplaats (milieudepot) worden  
gebracht waar dergelijke producten worden gerecycled.  
Neem voor meer informatie contact op met de relevante  
overheidsafdeling voor afval/vuilnis die in uw land bestaat.  
Het kan nadelige gevolgen hebben op voor mens en milieu als afval  
op een verkeerde manier wordt behandeld waardoor potentieel  
schadelijke stoffen vrij komen. Door uw medewerking te verlenen en  
dit product op de juiste wijze wegwerpt, kunt u een bijdrage leveren  
aan het herstellen, hergebruiken en recyclen van dit product om zo  
ons milieu te beschermen.  
Afvalverwijdering van Elektrische & Elektronische Apparatuur  
voor Zakelijk Gebruik  
(Alleen van toepassing in de Europese Unie)  
Voor nadere informatie aangaande het wegwerpen van producten  
voor zakelijke doeleinden, wordt u verzocht contact op te nemen met  
uw dealer of de distributeur in uw land. Dit product mag niet samen  
met of in de vorm van commercieel afval worden weggegooid.  
Svenska  
Bortskaffning av förbrukade elektriska & elektroniska produkter  
för hushållsbruk  
(Gäller enbart i den Europeiska Unionen)  
Denna symbol (en överkorsad soptunna) på produkten innebär att  
produkten ej ska blandas eller slängas med ditt hushållsavfall när  
den är förbrukad.  
Produkten ska lämnas till en lokal insamlingsplats för denna slags  
produkter för återvinning.  
Kontakta kommunkontoret för närmare detaljer om var du finner  
sådana insamlingsplatser.  
Olämplig avfallshantering kan få negativa effekter på miljön och på  
mänsklig hälsa då en produkt kan innehålla farliga ämnen. Vi ber om  
ditt samarbeta i bortskaffningen av denna produkt för att bidra till  
återvinning, återanvändning och en hälsosammare miljö.  
Bortskaffning av förbrukade elektriska & elektroniska produkter  
för affärsbruk  
(Gäller enbart i den Europeiska Unionen)  
Kontakta din handlare eller distributör för närmare detaljer om  
bortskaffning av produkter som använts i affärssyfte. Denna produkt  
får inte blandas eller slängas med annat affärsavfall.  
Dansk  
Bortskaffelse af udtjent elektrisk og elektronisk udstyr i  
produkter til hjemmebrug  
(Gælder kun i EU)  
Symbolet (en overstreget affaldsspand med hjul) på produktet  
angiver, at produktet ikke må blandes med eller bortskaffes sammen  
med almindeligt husholdningsaffald, når det er udtjent.  
Produktet skal afleveres til det lokale affaldsindleveringssted til  
genbrug.  
Kontakt venligst afdelingen for bortskaffelse af affald i din kommune  
angående yderligere information.  
Uhensigtsmæssig bortskaffelse af affald kan have en negativ  
virkning på miljøet og folks helbred, da det kan indeholde potentielle,  
farlige substanser. Med din medvirken i henseende til  
forskriftsmæssig bortskaffelse af dette produkt, kan du bidrage til  
genbruge, recirkulere og genindvinde produkterne og samtidigt  
medvirke til, at vores miljø vil blive beskyttet.  
Bortskaffelse af udtjent elektrisk og elektronisk udstyr i  
produkter til forretningsbrug  
(Gælder kun i EU)  
Kontakt venligst din forhandler eller distributør der, hvor du bor,  
angående yderligere information om bortskaffelse af produkter til  
forretningsbrug. Dette produkt må ikke blandes med eller bortskaffet  
sammen med kommercielt affald.  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Português  
Suomi  
Eliminação de Equipamentos Eléctricos e Electrónicos para  
Uso Doméstico  
Sähkö- ja elektroniikkatuotteiden hävitysohjeet kotitalouksia  
varten  
(Aplicável somente na União Europeia)  
(Vain Euroopan Unionia varten)  
O símbolo (caixote de lixo de rodas com uma linha cruzada) em seu  
produto indica que o produto, no fim da sua vida útil, não deve ser  
misturado ou eliminado com o lixo doméstico comum.  
Tuotteeseen merkitty symboli (ylitse ruksattu jätesäiliö) osoittaa, että  
tuotetta ei saa sekoittaa eikä hävittää talousjätteiden kanssa.  
Tuote on luovutettava sopivaan tällaisten laitteiden kierrätyksestä  
huolehtivaan keräyspisteeseen.  
Este produto deverá ser entregue a uma estação de recolha de lixo  
da comunidade local para a reciclagem do produto.  
Pyydä lisätietoja jäteasioista vastaavilta paikallisilta viranomaisilta.  
Tämän tuotteen asianmukaisen hävittämisen varmistamisella  
autetaan estämään sen mahdolliset ympäristöön ja terveyteen  
kohdistuvat haittavaikutukset, joita voi aiheutua muussa  
tapauksessa tämän tuotteen epäasianmukaisesta käsittelystä.  
Hävittämällä tuotteen asianmukaisesti autat varmistamaan, että  
tuote uudelleenkäytetään, kierrätetään ja kerätään ja ympäristöä  
suojellaan.  
Para mais informações, entre em contacto com o Departamento de  
Tratamento de Lixo do Governo do seu país.  
O tratamento de lixo incorrecto poderia provocar um efeito negativo  
no meio ambiente e saúde humana devido a substâncias  
potencialmente perigosas. Com a sua cooperação para a eliminação  
correcta deste produto, contribuirá para a reutilização, reciclagem e  
recuperação do produto, e nosso meio ambiente será protegido.  
Eliminação de Equipamentos Eléctricos e Electrónicos para  
Uso Comercial  
Sähkö- ja elektroniikkatuotteiden hävitysohjeet yrityskäyttäjille  
(Vain Euroopan Unionia varten)  
(Aplicável somente na União Europeia)  
Lisätietoja tuotteiden hävitysohjeista yrityskäyttäjille antavat  
jälleenmyyjät tai edustajat kussakin maassa. Tätä tuotetta ei saa  
sekoittaa eikä hävittää kaupallisten jätteiden kanssa.  
Para mais informações sobre a eliminação de produtos para  
propósitos comerciais, entre em contacto o seu revendedor ou  
distribuidor em seu país. Este produto não deverá ser misturado ou  
eliminado com lixo comercial.  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Download from Www.Somanuals.com. All Manuals Search And Download.  
GUIDELINES LAID DOWN BY FCC RULES FOR USE OF THIS UNIT IN THE U.S.A. (not  
applicable to other areas).  
NOTICE  
This equipment has been tested and found to comply with the limits for a Class B digital device,  
pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection  
against harmful interference in a residential installation. This equipment generates uses and can  
radiate radio frequency energy and, if not installed and used in accordance with the instructions, may  
cause harmful interference to radio communication. However, there is no guarantee that interference  
will not occur in a particular installation. If this equipment does cause harmful interference to radio  
or television reception, which can be determined by turning the equipment off and on, the user is  
encouraged to try to correct the interference by one or more of the following measures:  
Reorient or relocate the receiving antenna.  
Increase the separation between the equipment and receiver.  
Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.  
Consult the dealer or an experienced radio/TV technician for help.  
FCC WARNING  
Changes or modifications not expressly approved by the party responsible for compliance could void  
the user’s authority to operate the equipment.  
Proper connectors must be used for connection to host computer and/or peripherals in order to meet  
FCC emission limits.  
Connector cable....XJ-A130V/XJ-A135V/XJ-A140V/XJ-A145V/XJ-A150V/XJ-A155V/XJ-A230V/  
XJ-A235V/XJ-A240V/XJ-A245V/XJ-A250V/XJ-A255V unit to PC  
Declaration of Conformity  
Model Number: XJ-A130V/XJ-A135V/XJ-A140V/XJ-A145V/XJ-A150V/XJ-A155V/XJ-A230V/  
XJ-A235V/XJ-A240V/XJ-A245V/XJ-A250V/XJ-A255V  
Trade Name: CASIO COMPUTER CO., LTD.  
Responsible party: CASIO AMERICA, INC.  
Address: 570 MT. PLEASANT AVENUE, DOVER, NEW JERSEY 07801  
Telephone number: 973-361-5400  
This device complies with Part 15 of the FCC Rules, Operation is subject to the following two conditions:  
(1) This device may not cause harmful interference, and (2) this device must accept any interference  
received, including interference that may cause undesired operation.  
Download from Www.Somanuals.com. All Manuals Search And Download.  
FCC Information  
This device, IEEE 802.11g Wireless LAN USB Adapter, complies with Part 15 of the FCC Rules. Operation is  
subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device  
must accept any interference received; including interference that may cause undesired operation.  
Federal Communications Commission (FCC) Statement  
This Equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to  
Part 15 of the FCC rules. These limits are designed to provide reasonable protection against harmful  
interference in a residential installation. This equipment generates, uses and can radiate radio frequency  
energy and, if not installed and used in accordance with the instructions, may cause harmful interference to  
radio communications. However, there is no guarantee that interference will not occur in a particular  
installation. If this equipment does cause harmful interference to radio or television reception, which can be  
determined by turning the equipment off and on, the user is encouraged to try to correct the interference by  
one or more of the following measures:  
— Reorient or relocate the receiving antenna.  
— Increase the separation between the equipment and receiver.  
— Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.  
— Consult the dealer or an experienced radio/TV technician for help.  
Warning: Changes or modifications to this unit not expressly approved by the party  
responsible for compliance could void the user authority to operate the  
equipment.  
Tested to comply with FCC standard. FOR HOME OR OFFICE USE.  
FCC RF Radiation Exposure Statement:  
1. This equipment complies with FCC RF radiation exposure limits set forth for an uncontrolled environment,  
under 47 CFR 2.1093 paragraph (d)(2).  
2. This Transmitter must not be co-located or operating in conjunction with any other antenna or transmitter.  
The IEEE 802.11g Wireless LAN USB Adapter has been tested to the FCC exposure requirements (Specific  
Absorbtion Rate).  
Tested To Comply With FCC Standards  
FOR HOME OR OFFICE USE  
FOR CALIFORNIA USA ONLY  
Perchlorate Material – special handling may apply.  
This Class B digital apparatus complies with Canadian ICES-003.  
Cet appareil numérique de la classe B est conforme à la norme NMB-003 du Canada.  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Precauzioni per il laser  
Questo proiettore è un dispositivo laser di classe 1  
che è conforme a IEC 60825-1.  
レーザーに関するご注意  
本機はIEC 60825-1に適合したクラス1レーザー  
製品です。  
Questo proiettore è dotato di un modulo laser  
incorporato. Lo smontaggio o la modifica è molto  
pericoloso e non deve essere tentato.  
Qualsiasi operazione o regolazione non  
specificatamente istruita dalla guida dell’utilizzatore,  
crea il rischio di esposizione a radiazione laser  
pericolosa.  
本機はレーザーモジュールを内蔵しています・  
改造は危険ですので行わないでください。  
取扱説明書に指定した以外の手順で操作や調整を行  
うと険なレーザー放射にさらされる原因となる  
ことがあります。  
Laser Precautions  
Att observera angående laser  
This projector is a Class 1 laser device that conforms  
Denna projektor är en laserapparat av klass 1 i  
with IEC 60825-1.  
enlighet med IEC 60825-1.  
This projector has a built-in laser module.  
Disassembly or modification is very dangerous and  
should never be attempted.  
Projektorn har en inbyggd lasermodul. Isärtagning  
eller modifiering är mycket farligt och bör aldrig  
försöka göras.  
Any operation or adjustment not specifically  
instructed by the user’s guide creates the risk of  
hazardous laser radiation exposure.  
En manövrering eller justering som inte specifikt  
anges i instruktionshäftet skapar risk för exponering  
för farlig laserstrålning.  
Vorsichtsmaßregeln zum Laser  
Dieser Projektor ist ein mit IEC 60825-1 konformes  
Lasergerät der Klasse 1.  
Dieser Projektor besitzt ein eingebautes Lasermodul.  
Ein Zerlegen oder Modifizieren ist sehr gefährlich  
und sollte auf keinen Fall versucht werden.  
Wenn das Gerät anders als in der  
Bedienungsanleitung angewiesen betrieben oder  
eingestellt wird, besteht die Gefahr, sich gefährlicher  
Laserstrahlung auszusetzen.  
Précautions concernant le laser  
Ce projecteur est un dispositif laser de Classe 1  
conforme à la norme IEC 60825-1.  
Ce projecteur intègre un module laser. Ne jamais  
essayer de démonter ou modifier ce module car ceci  
est très dangereux.  
Toute opération ou tout réglage non mentionné  
spécifiquement dans le mode d’emploi crée un  
risque d’exposition dangereuse aux radiations du  
laser.  
Precauciones sobre el láser  
Este proyector es un dispositivo láser de Clase 1 que  
cumple con la norma IEC 60825-1.  
Este proyector cuenta con un módulo láser  
incorporado. El desarmado o modificación puede  
resultar muy peligro y nunca debe intentarlo.  
Cualquier operación o ajuste no indicado  
específicamente en la guía del usuario crea el riesgo  
de exposición a radiación láser peligrosa.  
【底面】  
[Bottom]  
[Unterseite]  
[Dessous]  
[Parte inferior]  
[Fondo]  
[Undersida]  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Batterij niet weggooien,  
maar inlevern als KCA  
Manufacturer:  
CASIO COMPUTER CO.,LTD.  
6-2, Hon-machi 1-chome, Shibuya-ku, Tokyo 151-8543, Japan  
Responsible within the European Union:  
CASIO EUROPE GmbH  
Casio-Platz 1, 22848 Norderstedt, Germany  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Printed in China  
Imprimé au Chine  
RJA521342-007  
MA1008-A  
Download from Www.Somanuals.com. All Manuals Search And Download.  

Bock Water heaters Water Heater Indirect Coil Tank Water Heater User Manual
Bosch Appliances Automobile Accessories SM515 User Manual
Bose Stereo System wave music system ic 1 User Manual
Braun Coffeemaker KF 600 User Manual
Briggs Stratton Water Dispenser 290000 User Manual
Bushnell Hunting Equipment 20 1916 User Manual
Canon Camera Lens EOS 1V HS User Manual
Carrier Water Pump 17CB User Manual
CDA Clothes Dryer CI920 User Manual
Centro Trash Compactor 85 1066 6 A01001 User Manual