KL-750
Owner’s Manual
Download from Www.Somanuals.com. All Manuals Search And Download.
Part 5 Character Size and Text Effects ...................................... 10
Character Size .............................................................................................. 10
To change the character size ................................................................ 10
Text Effects ................................................................................................... 11
To specify a text effect .......................................................................... 11
Part 1 Getting Acquainted
This part of the manual provides you with important information you need to
know in order to use the Label Printer to its full potential. Be sure to read it
carefully before using the Label Printer for the first time.
Part 6 Printing.............................................................................. 11
Printing a Tape .............................................................................................. 11
To print a tape ....................................................................................... 11
Stamp Printing .............................................................................................. 12
To print a stamp tape ............................................................................ 12
Mirror Image Printing .................................................................................... 12
To turn mirror image printing on and off ................................................ 12
Other Printing Features and Operations ....................................................... 12
Auto Feed ..................................................................................................... 13
To turn auto feed on and off .................................................................. 13
To manually feed tape ........................................................................... 13
Print Density .................................................................................................. 13
To adjust the print density ..................................................................... 13
Important Precautions
• Keep your Label Printer out of areas subject to temperature extremes, mois-
ture and direct sunlight. The recommended temperature range is 10° to 35°C
(50° to 95°F).
• Don’t let coffee, juice or other liquids splash onto the Label Printer.
• Never let paper clips, pins or other foreign objects get into the tape outlet slot
or printer of the Label Printer.
• Do not pile heavy objects on top of the Label Printer.
• Never try to take the Label Printer apart or attempt your own maintenance.
• Do not drop your Label Printer and avoid strong impact.
• Do not pull on the tape or try to force it back into the Label Printer.
• The yellow cutter cartridge inside the Label Printer contains a sharp blade for
cutting the printed tape. Keep your fingers away from this cartridge and be
especially careful to keep the cartridge away from small children.
• Do not operate the cutter lever without a tape cartridge loaded in the Label
Printer. Doing so can damage the cutter blade.
Part 7 Memory ............................................................................. 13
To store data ......................................................................................... 13
To recall text from memory ................................................................... 13
To delete text from memory .................................................................. 14
Part 8 Reference .......................................................................... 14
Replacing the Tape Cutter Blade .................................................................. 14
To replace the tape cutter blade ........................................................... 14
Cleaning the Printer Head and Roller ........................................................... 15
To clean the printer head and roller ...................................................... 15
Initial Power On Settings ............................................................................... 15
Initializing the Label Printer ........................................................................... 15
To initialize the Label Printer ................................................................. 16
Troubleshooting ............................................................................................ 16
Specifications ................................................................................................ 17
• Do not apply excessive force to the tape cutter lever. Doing so can damage
the Label Printer.
• Do not use benzine, thinner, or other volatile chemicals to clean the exterior
of the Label Printer. Use a soft, dry cloth or a cloth dampened in a weak
solution of a mild, neutral detergent and water. Wring the cloth out until all
excess moisture is removed.
• A dirty printer head can cause printing to become smudged. When this hap-
pens, clean off the printer head by wiping it with a cotton swab moistened
with alcohol (page 15).
• Use of the Label Printer next to a television or radio may interfere with recep-
tion.
E-2
Download from Www.Somanuals.com. All Manuals Search And Download.
General Guide
Front
Back/Left Side
Power Keys
Liquid crystal display (LCD)
Turn power on and off.
Tape cutter lever
Tape cutter lever
Function key
Optional AC Adaptor connector
Letter keys
Battery compartment
Tape Cutter Operation Precaution
Note the following important precautions when operating the tape cutter
lever.
1. When operating the tape cutter lever, make sure you do not press it
too hard.
2. Always return the tape cutter lever by hand back to its original posi-
tion after the tape is cut.
1
2
Tape outlet
E-3
Download from Www.Somanuals.com. All Manuals Search And Download.
Label Printer Menus
Replacing Batteries
Label Printer operation is designed to be as simple as possible, thanks to on-
screen menus that you can use to select the settings you need. Each menu is
described in detail in the sections that follow in this manual, but note the follow-
ing general points when using them.
A handy low battery power indicator lets you know when battery power is get-
ting too low for proper operation. The message “BATT” appears on the display
if battery power is low when you perform any of the following operations.
• Turn power on
• Execute a print operation
• The item that is underlined in a menu is the one that is currently selected.
Whenever the “BATT” message appears, press SET to clear it from the display.
You should still be able to perform some Label Printer operations, but some
power intensive operations (like printing) may become impossible if battery power
is too low. In any case, you should replace batteries as soon as possible or
switch to the AC adaptor as soon as possible after the “BATT” message ap-
pears.
,.: ;
Currently selected item
• Use K and L to move the underlining up and down and change the se-
lected item.
Important!
Batteries can burst or leak and damage your unit if you do not use them cor-
rectly. Note the following important points.
• Press SET to execute the underlined item, or ESC to exit the displayed menu
(and return to the previous menu or screen) without selecting anything.
• When you press SET to execute a menu item, the Label Printer either moves
on to the next menu, or it executes the selected function and returns to the
text input screen that you started from.
• Be sure that the plus (+) and minus (–) sides of each battery are facing cor-
rectly.
• Never mix batteries of different types
• Never leave dead batteries in the Label Printer.
• Remove the batteries if you do not plan to use the Label Printer for a long
time.
• Replace the batteries at least once every 2 years.
Warning!
Part 2 Getting Ready
• Never use recharged batteries with the unit.
• Do not expose batteries to direct heat, do not short circuit them, and do not
try to take them apart.
• Keep batteries out of the reach of small children. If swallowed, consult
with a physician immediately.
This part of the manual tells you how to load batteries and the tape cartridge,
and how to perform other basic setups for the Label Printer.
• Be sure to replace the batteries in accordance with the battery life printed on
the side of the battery itself.
Important!
• Be sure to read this section before attempting to use the Label Printer.
Power Supply
The Label Printer can be powered by eight AA-size batteries or an optional AC
adaptor (AD-A95100).
E-4
Download from Www.Somanuals.com. All Manuals Search And Download.
To replace the batteries
Turning Power On and Off
1. Turn power off.
Press ON to turn power on, and OFF to turn power off.
• If you are using the optional AC adaptor for power, you should also unplug it
from the Label Printer.
Important!
• If you are using the Label Printer for the first time, you should reset it first.
2. Open the battery compartment cover on the
back of the Label Printer by sliding it in the di-
rection indicated by the arrow.
Resetting the Memory
You should reset the memory of the Label Printer before using it for the first
time, after you have not used it for a long time, or if nothing happens when you
turn power on, even after you change the batteries.
3. Remove all eight of the old batteries.
Important!
4. Load a set of eight new batteries into the bat-
tery compartment, making sure that their posi-
tive (+) and negative (–) ends are facing in the
correct directions.
• Resetting Label Printer memory clears its memory of all input data.
To reset the memory
1. Make sure that Label Printer power is off.
2. While holding down the PRINT and ESC keys,
press ON to turn power on.
5. Replace the battery compartment cover.
3. Keeping PRINT and ESC held down, release
INT?
the ON key only.
AC Adaptor
Note the following important precautions when using an AC adaptor to power
your Label Printer.
4. Press SET to initialize the Label Printer or ESC to abort the reset operation
without initializing anything.
• Use only a genuine CASIO AD-A95100 AC adaptor with the same voltage
rating as the household current in your area. Using a wrong adaptor can
damage your Label Printer.
• See “Initializing the Label Printer” on page 15 for information on the initial
default settings of the Label Printer following the reset operation.
• Be sure to turn the Label Printer off before you connect the adaptor. Do not
turn power on until the adaptor is connected to the Label Printer and plugged
into and AC outlet.
• Be sure to unplug the AC adaptor from the AC outlet whenever you are not
using the Label Printer.
Auto Power Off Function
If you do not perform any key operation for about six minutes, the Label Printer
automatically turns power off. To restore power, press ON.
To connect the AC adaptor
Connect the adaptor to the Label Printer as illus-
trated nearby. Plug the other end into a standard
household AC outlet.
Tape Cartridges
Use the procedures described below to load a tape cartridge into the Label
Printer. After you load the tape cartridge, be sure to use the procedure de-
scribed under “Tape Width Specifications” on page 6 to tell the Label Printer
what is the width of the tape you are using.
E-5
Download from Www.Somanuals.com. All Manuals Search And Download.
Important!
4. Use a pencil or some other thin object to take
up slack in the ink ribbon as shown in the illus-
tration. Note that the tape does not move at this
time.
• Never try to push the tape back into the cassette. Once tape is out of the
cassette, there is no way to wind it back in. Trying to do so can cause opera-
tional problems with the Label Printer.
• If the ink ribbon is slack when you load it into the
Label Printer, it can break or cause some other
problem.
• Be sure to turn the ink ribbon take up spool only
in the direction indicated by the arrow (a).
• Turn the spool until the other spool (b) starts turn-
ing in the direction noted by the arrow. This indi-
cates there is no slack in the ribbon.
To load a tape cartridge
1. Make sure that the Label Printer is turned off.
2. Open the tape cartridge compartment cover.
• If there is a cartridge already in the Label Printer,
remove it by grasping the cartridge on both sides
with your thumb and forefinger, and lift straight
up.
(a)
(b)
5. Load the tape cartridge into the Label Printer,
making sure that the tape and ink ribbon pass
between the head and roller.
3. Remove the stopper from a new tape cartridge
and check to see that the tape is ready to use.
Roller
Head
6. Close the tape cartridge compartment cover.
7. Turn on Label Printer power and press FUNCTION and then PRINT (FEED)
two or three times to make sure that the tape comes out without any problem.
• If the tape does not come out normally, turn off power and start again from
step 1 above.
Tape guide
• Make sure that the tape is under the tape guide
and that it is not bent or twisted.
Tape Width Specification
Important!
• When using 6mm tape, using certain character sizes can cause characters to
run off the top or bottom of the tape. Be sure to use the following procedure to
tell the Label Printer when you are using 6mm tape.
To specify 6mm tape width
1. Turn power on.
2. Press FUNCTION and then 9 (6mm).
3. Press H J K or L to change the setting shown on the display between
• Make sure that the tape does not extend too far
past the tape guide. If it does, cut off the end
with a pair of scissors.
ON (6mm tape) and OFF (other tape width).
4. When the tape width setting is the way you want it, press SET to register it.
• The tape width you set remains in effect until you change it or reset the Label
Printer’s memory.
E-6
Download from Www.Somanuals.com. All Manuals Search And Download.
• Shift indicator
This indicator appears when you press the SHIFT key. While this indicator is on
the display, the keyboard is shifted, so the letter keys input upper-case alpha
characters. The number keys input the punctuation symbols marked in the up-
per right corners of the keys.
If both the caps mode indicator and the shift indicator are shown on the display,
the keyboard is shifted to lower-case input.
Part 3 Inputting Characters and Symbols
This part of the manual tells you how to input characters. To make things easier
to understand, we call everything you input a character, regardless of whether it
is actually a letter, number, or symbol. Explanations here all use the default
settings that are in effect from the initial power-on screen.
The keyboard automatically unshifts (and the shift indicator disappears) as soon
as you input a character.
For information on using other character styles, effects and sizes, see page 10.
Important!
• Code indicator
• You can input up to 63 characters per label. Further input becomes impossi-
ble after you input the 63rd character.
This indicator appears when you press the CODE key. While this indicator is on
the display, number keys 1 through 5 input the accents marked above them and
the O, S and C keys input the special characters marked in their lower right
corners.
Display Symbols and Indicators
Before getting into actual input, you should first become acquainted with the
symbols and indicators used on the Label Printer display.
The keyboard automatically returns to normal (and the code indicator disap-
pears) as soon as you input an accent.
• Caps indicator
This indicator appears when the Label Printer is in the caps (upper-case) mode.
All letters you input in the caps mode are upper-case. When the caps mode
indicator is not shown on the display, all letters are input as lower-case.
Note that the Label Printer stays in the caps mode until you press the CAPS
key again.
Function indicator
Effect indicators
Stamp printing indicator
A A A
FUNCTION
Mirror printing
STAMP
MIRROR
M-FEED
6mm
Shift
If both the caps mode indicator and the shift indicator are shown on the display,
the keyboard is shifted to lower-case input.
indicator
SHIFT
CODE
CAPS
indicator
Code
CAS
Manual feed
indicator
indicator
• Effect indicators
These indicators point to the character effect that is currently in use. You can
select between shading, underline, and box.
Caps indicator
Cursor 6mm tape indicator
• Stamp printing indicator
This indicator appears when the Label Printer is set up for stamp printing. La-
bels you create with stamp printing can be attached to an optionally available
stamp holder and then used as a pre-inked stamp.
Character position marks
• Function indicator
This indicator appears when you press the FUNCTION key. Pressing a key
while this indicator is on the display causes the function marked above that key
to be executed.
• Mirror image printing indicator
This indicator appears when the Label Printer is set up for mirror image printing.
Normal (non mirror image) printing is performed when this indicator is not shown.
E-7
Download from Www.Somanuals.com. All Manuals Search And Download.
• Manual feed indicator
This indicator appears when you are using manual feed instead of auto feed.
Auto feed is in effect when this indicator is not on the display.
• If you input a wrong character, press BS to delete it and input again. See
page 9 for other details on editing text.
3. When you reach the end of a line of text, press B (the L cursor key) to
input a newline mark.
Important!
• After you finish printing when using manual feed, be sure to always press
FUNCTION and then PRINT (FEED) to feed the tape before cutting it. If you
don’t you will cut off part of the printed text.
• A newline operation is indicated on the display by the ¥ symbol. This shows
where you changed lines.
4. Input the characters in the second line.
5. To print the text that you input, press PRINT. For details on printing, see
• 6mm tape indicator
page 11.
This indicator appears when you use the procedure on page 6 to specify you
are using 6mm tape. No indicator is shown when you are using other (9mm,
12mm, 18mm) tape.
About the CODE key…
The CODE key makes it possible to input punctuation needed for a number of
different languages. The following shows the key operations you should use for
each of the characters formed using the CODE key.
• Cursor
The cursor shows the next input position. Any character you input appears at
the point where the cursor is located.
Key Operation
Input
Key Operation
Input
• Character position marks
These marks show where characters will appear as you input them. This part of
the display is always blank when you turn power on.
CODE S*
CODE O
CODE C
CODE 1
ß
Œ
Ç
´
CODE 2
CODE 3
CODE 4
CODE 5
`
¨
˜
ˆ
Basic Alpha-Numeric Input
The following operation shows you the basic procedures for inputting letters
and numbers. We will explain the procedure by inputting the following charac-
ters using the default initial power-on screen.
* Lower case only.
Example: To input á.
CODE 1 A
ABXYZ Computer Company
1234567890
Special Symbols
You can also access a menu of special symbols by pressing FUNCTION 4
Note
(SYMBOL).
• If you hold down any key, it will repeat its operation or input at high speed until
you release it.
To input special symbols
Example: To input the special symbol #.
To input alpha-numeric characters
1. Turn power on.
1. With the cursor at the location where you want
2. Input the first line of characters.
to input a special symbol, press FUNCTION 4
• To input the upper-case letters, you can use either SHIFT or CAPS. With
SHIFT you must shift the keyboard for each character. With CAPS the key-
board stays in upper-case until you press CAPS again.
• Press SPACE to input spaces.
(SYMBOL).
,.: ;
• The symbol that is underlined on the display is
the one that is currently selected.
E-8
Download from Www.Somanuals.com. All Manuals Search And Download.
2. Use the H and J cursor keys to move the underlining to the symbol you
To delete characters using the BS key
Example: To change the word “commmputer” to “computer”.
1. Use H and J to move the cursor under “p”.
want.
• Not all of the available symbols fit on the display. The menu will scroll when
you press the cursor keys.
• In this example, underline #.
3. After you underline the symbol you want, press
SET.
• This returns to the input screen, with the symbol
you selected input at the location where the cur-
sor was located when you displayed the symbol
list.
pute
#
IO
2. Press BS twice to delete the two m’s to the left of the cursor, shifting “puter”
to the left as you do.
3. Press FUNCTION and then J to jump back to the end of the characters for
more input.
To delete characters using the DEL key
Example: To change the word “commmputer” to “computer”.
Part 4 Deleting and Inserting Characters
1. Use H and J to move the cursor under the first (far left) “m”.
2. Press DEL twice to delete the two m’s at the cursor’s position, shifting “mputer”
to the left as you do.
3. Press FUNCTION and then J to jump back to the end of the characters for
more input.
This section describes everything you need to know about deleting and editing
characters you have already input.
Moving the Cursor
Use the cursor keys to move the cursor around the display and position it for
deleting and editing characters.
Clearing the Display
Use the following procedure to clear all input text from the display.
To move the cursor
• Press H to move the cursor to the left, and J to move the cursor to the right.
• Press FUNCTION and then H to make the cursor jump to the beginning (far
left) of the characters on the display.
• Press FUNCTION and then J to make the cursor jump to the end (far right)
of the characters on the display.
To clear the display
Press FUNCTION and then BS (CLS).
At this time the message CLS? appears on the display to confirm that you want
to clear the display. Press SET to clear or ESC to abort the operation without
clearing anything.
• Holding down the H or J cursor key moves the cursor at high speed.
Text Editing
You can use the following procedures to edit text on the display.
Deleting Individual Characters
You can delete individual characters with either the BS key or the DEL key
(which is the K cursor key). The only difference between the operation of these
two keys is the location of the cursor.
To insert new characters
Example: To change the text “ABCDEF” to “ABCXYZDEF”.
1. With the original text on the display, move the cursor under the letter “D”.
E-9
Download from Www.Somanuals.com. All Manuals Search And Download.
2. Input the new characters (XYZ).
Important!
• Inputting the new characters causes them to be inserted at the cursor posi-
tion. The existing characters are opened up to make room for the new char-
acters.
• Any character size specification you make is applied to all the characters on
the display. You cannot make multiple specifications for specific characters.
• The Label Printer automatically adjusts the character size whenever you in-
put a ¥ symbol to create a 2-line label as shown below.
To change existing characters to different ones
Initial Size
2×1
Size After B Operation
Example: To change the text “ABCDEF” to “XYZDEF”.
1×1
1×2
1×3
1. With the original text on the display, use either the BS key or DEL key to
delete the characters to be changed (ABC).
• Remember to use the correct cursor location for the key you plan to use to
delete the characters. See page 9 for details.
2×2
2×3
Note that you cannot input a ¥ symbol if you are using 6mm wide tape.
2. Input the new characters (XYZ).
To change the character size
Example: To input “ABXYZ” as 2×2 characters.
1. Input the text.
2. Press FUNCTION 2 (SIZE) to display the cur-
rent character size setting.
Part 5 Character Size and Text Effects
2
×
2
This part of the manual explains how to change the size of characters. It also
tells you how to assign text effects like underlining, shading, and box printing.
3. Use K and L to change the displayed size in the following sequence.
Character Size
The following table shows the six character sizes that are available.
1×1
2×3
1×2
2×2
1×3
2×1
2×1
1×3
2×2
1×2
2×3
1×1
Character Size Indicator
Actual Size (mm)
1×1
1×2
1×3
2×1
2×2
2×3
3×3
3×6
3×9
6×3
6×6
6×9
4. When the character size you want to specify is
on the display, press SET to select it and return
to the text display.
XYZ
Character size changes are applied to printed text only. The size of the dis-
played text does not change.
Note
• You could also perform the above procedure in reverse, specifying the char-
acter size first and then inputting the text.
E-10
Download from Www.Somanuals.com. All Manuals Search And Download.
Text Effects
Part 6 Printing
There are three text effects that you can assign: shading, underlining, and boxed
text. The following shows examples of each.
This part of the manual includes all the information you need to print tapes. It
also tells you how to print special stamp tapes that you can attach to an optional
stamp holder to create your own original stamps.
Shading:
Underlining:
Boxed Text:
Printing Precautions
• Never turn power off while printing is being performed.
• Make sure that the tape outlet is not blocked before you start printing.
• Never operate the tape cutter while printer is being performed (indicated by
the message “PRNT” on the display).
Text effect changes are applied to printed text only. The appearance of the
displayed text does not change, but the text effect indicators will show you
when a text effect is being used.
• During printing at very high density, printing of very long text, or repeat print-
ing of the same text a number of times, the Label Printer may stop printing for
about five seconds. This is not a malfunction, and normal printing should
resume shortly (indicated by the message “P R N T” on the display).
Important!
• Any text effect specification you make is applied to all the characters on the
display. You cannot make multiple specifications for specific characters.
To specify a text effect
Printing a Tape
Printing a tape is as easy as pressing the PRINT key.
Example: To shade the text “ABXYZ”.
1. Input the text.
2. Press FUNCTION 3 (EFFECT) to display a menu of text effects.
To print a tape
1. Press the PRINT key to print a tape of the text you have input and laid out.
• To stop a print operation that is in progress, press ESC.
Normal (no effects)
2. After the print operation is complete, press down on the tape cutter lever to
cut the tape.
3. Use scissors to trim the tape to the size you want, if necessary.
• After you print a tape, you can peel off its paper
Box
Shading
–
Cursor
Underline
backing and stick the tape onto the object you
want. Note that the tape will not stick on coarse,
wet, oily, or soiled surfaces. Also, you should not
try to use the tape where it is exposed to direct
sunlight or rain. Do not stick the tape onto hu-
man skin.
Backing
3. Use H and J to move the cursor to the effect you want to use.
4. When the cursor is located under the effect you
want to specify, press SET to select it and re-
turn to the text display.
Tape
XYZ
• An easy way to remove the backing from a tape
and expose the adhesive surface is to bend the
tape near one of its ends. This should cause the
tape and its backing to separate, allowing you to
pull them apart.
Note
• You could also perform the above procedure in reverse, specifying the text
effect first and then inputting the text.
E-11
Download from Www.Somanuals.com. All Manuals Search And Download.
Stamp Printing
Mirror Image Printing
The stamp printing feature lets you print on special stamp tape. You can then
attach the finished stamp tape to an optionally available stamp holder to create
your own original pre-inked stamps. The following is the type of stamp holder
currently available for use with stamp tapes.
When you specify mirror image for text, it is printed in reverse image. Use mir-
ror image when you plan to print on transparent tape, with the printing on the
inside. When viewed through the transparent tape, the text will appear normal.
You can also use mirror image printing when using iron-on transfer tape to print
iron-on transfers.
Type
Maximum Stamp Size
Example
Normal
ST-15
5.5cm
Mirror Image
5.5cm
7.9cm
To turn mirror image printing on and off
1. Press FUNCTION and then 6 (MIRROR).
Note the following important points about stamp printing.
• Stamp printing prints text in mirror image.
• Stamp printing is impossible while 6mm is specified as the tape width.
• An error message (ERR!) appears on the display and the Label Printer refuses
to print whenever you try to print text that is longer than the maximum length
you specify.
J
OFF
2. Press H J K or L to change the setting shown on the display between
ON (mirror printing) and OFF (normal).
3. When the mirror image printing setting is the way you want it, press SET to
register it.
To print a stamp tape
1. Input the text you want to print.
2. Press FUNCTION and then 5
(STAMP).
• A mark appears next to the
STAMP indicator on the display
when mirror printing is turned on.
STAMP
MIRROR
• A mark appears next to the MIRROR indicator on the display when mirror
printing is turned on.
PRN?
• After you turn printing on, input text and perform the print operation as you
normally do (page 11) to produce mirror image tapes.
• If the text you input in step 1 is too long to fit within the maximum length you
specified, an error message (page 16) appears when you press SET.
Other Printing Features and Operations
The following are other operations and settings that you may need to use when
printing.
3. Press SET to print the stamp tape or ESC to abort the print operation and
return to the text input display in step 1.
• After the printing is complete, the Label Printer returns to the input display in
step 1.
4. Cut off the tape and affix it to the optional stamp holder.
• See the instructions that come with the optional stamp holder for information
about how to attach the stamp tape.
E-12
Download from Www.Somanuals.com. All Manuals Search And Download.
Auto Feed
Part 7 Memory
You can turn the Label Printer’s auto feed feature on and off. When auto feed is
on, the Label Printer automatically feeds the tape about 12mm at the beginning
and end of each print operation. This creates identical margins on both sides of
your text.
This part of the manual tells you how to store text data in memory for instant
recall when you need it. You can store two blocks of text in memory, each con-
taining up of 63 characters, for a total of 126 characters.
Important!
• After you finish printing when using manual feed, be sure to always press
FUNCTION and then PRINT (FEED) to feed the tape before cutting it. If you
don’t you will cut off part of the printed text.
To store data
1. Input the text you want to store.
2. Press FUNCTION and then 1 (MEMO).
To turn auto feed on and off
1. Press FUNCTION and then 7 (M-FEED).
STR?
J
NO
3. Press SET to store the text in memory or ESC
to abort the store procedure without storing
anything.
2. Press H J K or L to change the setting shown on the display between
YES (manual feed) and NO (auto feed).
3. When the feed setting is the way you want it, press SET to register it.
OK
• If there is nothing in memory yet, your text is
automatically stored in Area 1. If Area 1 already
contains data, your new input is automatically
stored in Area 2.
• If there is not enough room for your text to fit in
memory, the message “FUL!” appears when you
To manually feed tape
Press FUNCTION and then PRINT (FEED) to feed the tape 13mm.
EFG
press SET in step 3.
Print Density
The print density setting controls how darkly figures are printed on your tapes.
To adjust the print density
1. Press FUNCTION and then 8 (DENSITY).
To recall text from memory
Example: To recall the contents of Area 2 while memory contains the following
text.
1234
Area 1: ABCDEFG
Area 2: CASIO
2. Use H and J to move the underlining to the density setting that you want.
• The lightest setting is 1, while the darkest setting is 5. The standard setting is 3.
• Only four of the five settings that are available can appear on the display. The
display scrolls left and right when necessary to shows all of the available
settings.
1. While the input screen is on the display, press
FUNCTION and then 1 (MEMO).
• Note that text recalled from memory will replace
any text currently on the display.
STR?
3. When the density setting is the way you want it, press SET to register it.
E-13
Download from Www.Somanuals.com. All Manuals Search And Download.
2. Press L to change to the text recall prompt.
3. Press SET.
• If all of the text does not fit on the display, you
can use H and J to scroll it to the left and right.
CAL?
ABCD
Area 1 text
3. Press SET.
• If all of the text does not fit on the display, you
can use H and J to scroll it to the left and right.
4. Use K and L to select Area 1 or Area 2 then
press SET.
ABCD
OK?
Area 1 text
4. Press L to change to Area 2.
• Use K and L to switch between Area 1 and
Area 2.
5. Press SET to delete the text from the area that is currently on the display.
CASI
Part 8 Reference
Area 2 text
5. Press SET to recall the text from the area that
is currently on the display.
• Note that recalling data from memory replaces
anything that is currently on the input display.
Memory text cannot be appended.
This section contains information about the Label Printer that you can use as
reference when you need it.
CASI
Replacing the Tape Cutter Blade
The tape cutter blade is designed to provide approximately 3,000 cuts. Use the
following procedure to replace the blade whenever it starts to cut poorly.
To delete text from memory
1. While the input screen is on the display, press
FUNCTION and then 1 (MEMO).
To replace the tape cutter blade
1. Make sure that the Label Printer is switched off.
2. Open the tape cartridge compartment cover.
STR?
DEL?
2. Press L twice to change to the text delete
prompt.
E-14
Download from Www.Somanuals.com. All Manuals Search And Download.
• If there is a cartridge already in the Label Printer,
remove it by grasping the cartridge on both sides
with your thumb and forefinger, and lift straight
up.
4. Use a cotton swab dipped in alcohol to clean
the printer head and roller as shown in the illus-
tration.
Printer head
3. Use a thin, pointed object to lift the yellow cut-
ter cartridge out of the Label Printer as shown
in the illustration.
Roller
5. Replace the tape cartridge and close the compartment cover.
• The tape cutter blade comes out of the cutter
cartridge if you press on the front of the cartridge.
Be sure to take care to avoid cutting your fingers
on the blade.
NO!
Initial Power On Settings
The following are the initial settings of the Label Printer whenever you turn it
power on.
Item
Power On
2×2
4. Install a new cutter cartridge by sliding it along
the groove provided in the Label Printer.
• Contact your CASIO dealer to purchase a re-
placement cutter cartridge.
SIZE
EFFECT
MIRROR
M-FEED
6mm
CANCEL
OFF
NO
OFF
5. Replace the compartment cover.
Initializing the Label Printer
Cleaning the Printer Head and Roller
If you experience serious malfunction of the Label Printer or if operation fails
completely, try performing the following operation to initialize the printer.
A dirty printer head and roller can result in poor printing quality. If you have
problems with print quality, use the following procedure to clean the printer head
and roller.
Important!
• Initializing the Label Printer deletes all memory contents. Make sure you have
a back-up copy of text stored in memory if you need it.
To clean the printer head and roller
1. Make sure the Label Printer is turned off.
2. Press the tape cartridge compartment cover release and open the compart-
ment cover.
3. Remove the tape cartridge.
E-15
Download from Www.Somanuals.com. All Manuals Search And Download.
To initialize the Label Printer
1. Turn power off.
Troubleshooting
2. While holding down the PRINT and ESC keys,
press ON to turn power on.
3. Keeping PRINT and ESC held down, release
the ON key only.
• This prompt confirms whether or not you want to
initialize the Label Printer.
Possible Cause
Problem
Action
• Attempt to input two ¥
marks within the same
text.
ERR! message
on the display.
• Use only one ¥ mark.
Only two lines of text
can be input, so text
can contain only one
¥ mark.
INT?
4. Press SET to initialize the Label Printer or ESC to abort the reset operation.
• The following table shows the initial settings.
• Attempt to input ¥
mark while 6mm is
specified as the tape
width.
• Do not use ¥ marks.
6mm tape can have
only one line of text,
so text cannot contain
any ¥ marks.
• Delete the ¥ mark to
print on 6mm tape or
switch back to a wider
tape.
Item
Reset
Cleared
Cleared
,
Display
Memory
• Label text containing a
¥ mark was input and
then tape width
specification was
changed to 6mm.
(ERR! message appears
when you try to perform
a print operation.)
• Text that is longer than
5.5cm when stamp
printing is selected.
• Attempt to print a stamp
while 6mm is specified
for the tape width.
SYMBOL
EFFECT
M-FEED
MIRROR
MEMO
CANCEL
NO
OFF
STR?
3
OFF
DENSITY
WIDTH
• Shorten the text to be
printed and try again.
• Change the tape width
setting to OFF and try
printing the stamp
again.
• Both text memory areas
(AREA 1 and AREA 2)
already contain text.
FUL! message
on the display.
• Delete text from one of
the text memory areas
and then store the new
text.
• Battery power is too
low.
BATT message
on the display.
• Replace batteries.
• Memory data has
become corrupted for
some reason.
ERR! message
on the display.
• Initialize the Label
Printer.
E-16
Download from Www.Somanuals.com. All Manuals Search And Download.
Specifications
Model: KL-750
Input
Keyboard Layout: Typewriter (QWERTY)
Character Types
Alpha (English and other languages): 99
Numbers: 10
Symbols: 37
Display
Type: Liquid crystal display
Columns: 4
Character matrix: 5×7-dot
Printing
Type: Thermal transfer
Speed: Approximately 6.67mm/second
Width: 4mm (6mm tape) or 8mm (other tape)
Character Matrix: 24×24-dot
Character font: Sans-serif
Character effects: Shade, underline, box
Character sizes: 1×1, 1×2, 1×3, 2×1, 2×2, 2×3
Number of lines: 1 (6mm tape); 1 or 2 (other tapes)
Memory
Text: Up to approximately 126 characters (total storage for AREA 1 and
AREA 2)
General
Power supply: Eight AA-size batteries or optional AD-A95100 AC adaptor
Battery life: Approximately 1 tape cartridge (continuous printing)
Power consumption: 9W
Auto Power Off: Approximately six minutes after last key operation.
1
7
3
Dimensions: 44.6 (H) × 174 (W) × 212 (D)mm (1 "H × 6 "W × 8 "D)
/
4
/
8
/
8
Weight: 452g (1lbs)
Ambient Temperature: 10°C~35°C (50°F~95°F)
E-17
Download from Www.Somanuals.com. All Manuals Search And Download.
CASIO COMPUTER CO., LTD.
6-2, Hon-machi 1-chome
Shibuya-ku, Tokyo 151-8543, Japan
Download from Www.Somanuals.com. All Manuals Search And Download.
|