ES
USER’S GUIDE
Please keep all information for future reference.
Safety Precautions
Before trying to use the keyboard, be sure to read the
separate “Safety Precautions”.
GUÍA DEL USUARIO
Guarde toda información para tener como referencia futura.
Precauciones de seguridad
Antes de intentar usar el teclado, asegúrese de leer
las “Precauciones de seguridad” separadas.
LK230ES1A
Download from Www.Somanuals.com. All Manuals Search And Download.
Contents
General Guide............................. E-2
Using Built-in Songs to
Using the 10-key Pad ( ) .................................E-4
Master Keyboard Play ..............E-21
bo
Using the Setting Button ( ) .............................E-4
4
Phrases............................................................ E-21
Step Up Lesson Flow....................................... E-21
Getting Ready to Play ................ E-5
Selecting the Song, Phrase, and
Part You Want to Practice................................ E-22
Preparing the Music Stand.................................E-5
Lessons 1, 2, and 3.......................................... E-23
Lesson Settings ............................................... E-24
Using Auto Step Up Lesson............................. E-25
Power Supply .....................................................E-5
Playing the Digital Keyboard..... E-6
Turning on Power and Playing ...........................E-6
Music Challenge
Using Headphones.............................................E-7
Keyboard Game ........................E-27
Changing Keyboard Response to
Touch Pressure (Touch Response)....................E-7
Turning Off Keyboard Lighting ...........................E-8
Using the Voice Pads.........................................E-9
Using the Metronome.........................................E-9
Using Auto Accompaniment ......E-29
Playing the Rhythm Part Only.......................... E-29
Playing All Parts............................................... E-30
Using Auto Accompaniment Effectively ........... E-32
Using One-Touch Preset ................................. E-33
Controlling the
Keyboard Sounds..................... E-11
Select from a variety of
musical instrument sounds...............................E-11
Connecting External Devices.....E-34
Connecting a Computer................................... E-34
MIDI Settings ................................................... E-35
Connecting to Audio Equipment ...................... E-37
Using Reverb....................................................E-12
Using a Pedal...................................................E-12
Changing the Pitch (Transpose, Tuning)..........E-13
Sampling a Sound and Playing It on the
Keyboard (Sampling)........................................E-13
Reference...................................E-38
Troubleshooting ............................................... E-38
Specifications................................................... E-40
Operating Precautions ..................................... E-41
Chord Example List.......................................... E-42
Using a Sampled Sound in a Rhythm
(Drum Assign) ..................................................E-16
Playing Built-in Songs ............. E-17
Playing the Demo Songs..................................E-17
MIDI Implementation Chart
Playing Back a Particular Song........................E-17
Included Accessories
Separately Available Accessories
• You can get information about accessories that
are separately for this product from the CASIO
keyboard catalog available from your retailer, and
from the CASIO website at the following URL.
● Music Stand
● Song Book
● Leaflets
• Safety Precautions
• Appendix
• Other (Warranty, etc.)
Items included as accessories are subject to change without notice.
E-1
Download from Www.Somanuals.com. All Manuals Search And Download.
General Guide
• In this manual, the term “Digital Keyboard” refers to the LK-230.
• In this manual, buttons and other controllers are identified using the numbers shown below.
1
2
3
4 5 6
7 8 9 bk bl bm
bn
bo
bp bq br
bs bt ck cl cm cn
co
cp
cq
cr cs
co
ct
dk
E-2
Download from Www.Somanuals.com. All Manuals Search And Download.
General Guide
POWER switch ☞E-6
RHYTHM, ONE TOUCH PRESET button
☞E-9, 11, 29, 33
1
2
3
4
5
6
7
8
9
bk
bl
bq
MAIN VOLUME slider ☞E-6
TONE button ☞E-6, 11
br
bs
bt
ck
cl
cm
cn
MIC VOLUME slider ☞E-13
LISTEN, VOICE PAD1 button ☞E-9, 14, 23
WATCH, VOICE PAD2 button ☞E-9, 14, 23
REMEMBER, VOICE PAD3 button ☞E-9, 14, 24
NEXT, VOICE PAD4 button ☞E-9, 14, 22
AUTO, VOICE PAD5 button ☞E-9, 14, 25
SETTING, KEY LIGHT button ☞E-4, 8
SAMPLING button ☞E-13, 14, 16
METRONOME, BEAT button ☞E-9
REPEAT, INTRO button ☞E-18, 19, 24, 32
REW, NORMAL/FILL-IN button ☞E-18, 22, 29, 32
FF, VARIATION/FILL-IN button ☞E-18, 22, 32
PAUSE, SYNCHRO/ENDING button ☞E-18, 32, 33
MUSIC CHALLENGE, SET SELECT button
☞E-9, 27
Speakers
co
cp
cq
cr
cs
ct
dk
PLAY/STOP, START/STOP button
☞E-17, 18, 20, 23, 24, 29
Song Bank list
Display
PART SELECT, ACCOMP ON/OFF, CHORDS
button ☞E-17, 20, 22, 24, 30, 36
bm
Rhythm list
TEMPO buttons ☞E-10, 19, 33
Tone list
bn
bo
bp
Number buttons, [–] [+] buttons ☞E-4
CHORD root names ☞E-30
Percussion instrument list ☞E-11
/
SONG BANK button ☞E-17, 19, 22, 27
dl
dm dn do dp dq
USB port ☞E-34
SUSTAIN jack ☞E-12
PHONES/OUTPUT jack ☞E-7, 37
AUDIO IN jack ☞E-37
DC 9V terminal ☞E-5
dl
dm
dn
do
dp
dq
MIC IN jack ☞E-13
E-3
Download from Www.Somanuals.com. All Manuals Search And Download.
General Guide
Using the 10-key Pad ( )
Using the Setting Button ( )
bo
4
Use the number buttons and the [–] and [+] buttons to change
the settings of the parameters that appear in the upper left
area of the display.
Use the Setting button ( ) to access settings that let you
select the reverb type, pedal effect, etc.
4
1. Press
.
4
Setting
Setting
T r a n s .
Parameter
2. Next press
until the parameter whose setting
you want to change is displayed.
4
M d e r n P n o
Each press of
cycles through the available parameters.
4
Parameter
Transpose
Display
Trans.
See Page
E-13
E-33
E-19
E-8
Number Buttons
1
2
3
4
5
6
7
8
9
Use the number buttons to enter numbers and values.
• Enter the same number of digits as the currently displayed
value.
Accompaniment Volume
Song Volume
AcompVol
Song Vol
Touch
Example: To enter tone number 005, input 0 3 0 3 5.
Touch Response
Tuning
Tune
E-13
E-12
E-24
E-25
E-25
E-25
E-15
E-35
E-35
E-36
E-36
E-12
E-6
Reverb
Reverb
Speak
• Negative values cannot be input using the number buttons.
Use [+] (increase) and [–] (decrease) instead.
Voice Fingering Guide
Note Guide
NoteGuid
Scoring
PhraseLn
SmplAuto
Keybd Ch
Navi. Ch
Local
[–] and [+] Buttons
Performance Evaluation
You can use the [+] (increase) and [–] (decrease) buttons to
change the displayed number or value.
• Holding down either button scrolls the displayed setting.
• Pressing both buttons at the same time will revert to the
initial default setting or the recommended setting.
10 Phrase
11 Sampling Start
12 Keyboard Channel
13 Navigate Channels
14 Local Control
15 Accomp Out
AcompOut
Jack
16 Pedal Effect
17 Power On Alert
Demo2
3. When the parameter you want is displayed, use
(10-key) to change its setting.
bo
• The parameter setting will disappear from the upper left
area of the screen if you do not perform any operation
for some time.
• The tone and other parameters revert to their initial
defaults whenever you turn on power (page E-6).
E-4
Download from Www.Somanuals.com. All Manuals Search And Download.
Getting Ready to Play
Using Batteries
Preparing the Music Stand
• Be sure to turn off power before loading batteries.
• It is up to you to prepare six commercially available
AA-size batteries. Do not use oxyride batteries or any
other nickel based batteries.
Music stand
1. Open the battery cover on the bottom of the
Digital Keyboard.
Power Supply
Either an AC adaptor or batteries can be used to power this
Digital Keyboard. Normally, use of AC adaptor power is
recommended.
• The AD-5 AC adaptor does not come with this Digital
Keyboard. Purchase it separately from your retailer. See
page E-1 for information about options.
2. Load six AA-size batteries into the battery
compartment.
Make sure the positive + and negative - ends of the
batteries are facing as shown in the illustration.
Using the AC Adaptor
Use the AD-5 AC adaptor when you want to power the Digital
Keyboard from a household electrical outlet.
DC 9V terminal
AD-5
3. Insert the tabs of the battery cover into the
holes on the side of the battery compartment,
and close the cover.
Tabs
Household power outlet
• Be sure to turn off Digital Keyboard power before
connecting or disconnecting the AC adaptor.
■ Low Battery Indication
The indicator shown below starts to flash to let you know
when battery power is low. Replace the batteries with new
ones.
Low battery indicator
(flashes)
E-5
Download from Www.Somanuals.com. All Manuals Search And Download.
Playing the Digital Keyboard
1 2
4 6
bo
bl
bn
bq br bs bt ck cl cm cn
Auto Power Off (Using Batteries)
Turning on Power and Playing
While you are using batteries for power, power will turn off
automatically if you do not perform any operation for about six
minutes. Auto Power Off is disabled while the AC adaptor is
being used for power.
1. Turn on
.
1
This turns on power.
2. Try playing something on the keyboard. Use
2
■ Disabling Auto Power Off
to adjust volume.
You can disable Auto Power Off to ensure that power is not
turned off automatically during a concert, etc.
Keyboard keys light.
Increase
1. While holding down , turn on power.
br
Auto Power Off will be disabled.
Decrease
Power On Alert (Using the AC Adaptor)
While you are using the AC adaptor for power, the keyboard
keys will light to remind you that power is on if you do not
perform any operation for about six minutes. Power on alert is
disabled while batteries are being used for power.
• Turning off the keyboard power causes all current
settings and sampled sounds (page E-13) to be cleared.
The keyboard will revert to initial default settings the
next time you turn it on.
■ Disabling Power On Alert
You can disable power on alert to ensure that keyboard keys
do not light during a concert, etc.
1. Press
a number of times until “Demo2”
appears on the display (page E-4).
4
D e m o 2
2. Press the
(10-key) [–] key to select the OFF
bo
setting.
E-6
Download from Www.Somanuals.com. All Manuals Search And Download.
Playing the Digital Keyboard
Using Headphones
Using headphones cuts off output from the built-in speakers,
which means you can practice playing even late at night
without disturbing others.
Changing Keyboard Response to
Touch Pressure
(Touch Response)
• Be sure to turn down the volume level before connecting
headphones.
Touch Response alters tone volume in accordance with
keyboard pressure (speed). This provides you some of the
same expressivity you get on an acoustic piano.
PHONES/OUTPUT jack
Keyboard Instrument Sound Intensity
■ Sound intensity depends on the speed that keys
are pressed.
People normally believe that the stronger the pressure applied
to a piano keyboard, the louder the sound. Actually, however,
the intensity of the notes played depends on the speed at
which keys are pressed. Notes are louder when keys are
pressed quickly, and quieter when keys are pressed slowly.
Keeping this in mind as you play a keyboard musical
instrument lets you control note volume without striving to
apply too much pressure with your fingertips.
• Headphones do not come with the Digital Keyboard.
• Use commercially available headphones. See page E-1 for
information about options.
■ The playability of an acoustic piano
• Do not listen to very high volume output over
headphones for long period. Doing so creates the risk
of hearing damage.
• If you are using headphones that require an adaptor
plug, make sure you do not leave the adaptor plugged
in when removing the headphones.
Your Digital Keyboard provides you with key touch that is the
next best thing to an acoustic piano. Note volume changes
automatically in accordance with key press speed.
Pressing fast produces
louder notes.
Pressing slowly produces
softer notes.
Do not try to use too much
pressure.
E-7
Download from Www.Somanuals.com. All Manuals Search And Download.
Playing the Digital Keyboard
Changing Touch Response Sensitivity
Turning Off Keyboard Lighting
Keyboard Lighting causes keyboard keys to light when you
press them, during built-in song playback, etc. You can use
the following procedure to turn off Keyboard Lighting.
Use the procedure below to control how much the volume of
played notes change in accordance with playing speed.
Select the setting that best matches your playing style.
1. Press
a number of times until “Touch”
appears on the display (page E-4).
4
1. Hold down
until “Keylight” appears on the
4
display.
T o u c h
y
g
K e l i h t
2. Use
(10-key) [–] and [+] keys to select one of
bo
2. Press the
(10-key) [–] key to select the OFF
bo
the three Touch Response sensitivity settings.
setting.
Off (oFF)
Touch Response is turned off. Sound
volume is fixed, regardless of key press
speed.
Indicator disappears when
Keyboard Lighting is turned off.
Type 1 (1)
Type 2 (2)
Normal Touch Response
More sensitive Touch Response than Type 1
Indicator disappears when
Touch Response is turned off.
E-8
Download from Www.Somanuals.com. All Manuals Search And Download.
Playing the Digital Keyboard
Sounding Sampled Sounds with the Voice
Pads
Using the Voice Pads
You can use the voice pads to sound various sound effects or
even sounds you have sampled (“Sampling”, page E-13). Use
the voice pads to add something extra to your performances.
Sampling sounds will change the tones assigned to sets 1
through 3 to the sampled sounds. For more information, see
page E-13.
1. Press
.
bq
Using the Metronome
Lights
The metronome lets you play and practice along with a steady
beat to help keep you on tempo.
Start/Stop
2. Press a pad (1 through 5,
through ) to
cm
bs
sound what is assigned to it.
1. Press
.
6
There are four sets of voice pad sounds numbered 1
through 4 (see below). Each press of
the sound sets 1 through 4.
This starts the metronome.
cycles thorough
cn
This pattern changes with each beat.
bs
bt
ck
cl
cm
cn
2. Press
again to stop the metronome.
6
Changing the Beats Per Measure
Pad 1
Pad 2
Pad 3
Pad 4
Pad 5
You can configure the metronome to use a bell sound for the
first beat of each measure of the song you are playing.
• You can specify 0, or a value from 2 to 6 as the number of
beat per measure.
• When playing a built-in song, the beats per measure setting
(which determines when the bell sounds) is configured
automatically for the currently selected song.
TONE 402
“VOICE
PAD 1”
TONE 403
“VOICE
PAD 2”
TONE 404
“VOICE
PAD 3”
Set 1
TONE 401 “ORIGINAL” *1
Set 2
Set 3
Set 4
Set 1 sounds with various pitches.*2
Set 1 sounds repeated.*3
XIAO LUO GUNSHOT
BONGO
CONGA
TAMBOURINE
*1: Pad 5 plays original sound raised a perfect fifth.
1. Hold down
until the beats per measure
setting screen appears on the display.
6
*2: Pad 1: Up a perfect fifth; Pad 2: Down a perfect fifth;
Pad 3: Same as Set 1; Pad 4: Up a major third;
Pad 5: Down a perfect fifth
*3: Pads 1 and 5: Gradually rising pitch;
Pad 2: Gradually falling pitch
Example: When Set 2 is selected
B e a t
• If you do not perform any operation for after the beats
per measure setting screen appears, the display will
return to the screen displayed before you pressed
.
6
P a d S e t
2. Use
(10-key) to enter the number of beats
bo
per measure.
• The bell will not sound if you specify 0 for this setting. In
this case, all beats are indicated by a click sound. This
setting lets you practice with a steady beat, without
worrying how many beats there are in each measure.
• While a sound set number is displayed, you can change it
using
(10-key). If you do not perform any operation for a
bo
few seconds after the indicator appears, the display will
return to the previous screen automatically.
E-9
Download from Www.Somanuals.com. All Manuals Search And Download.
Playing the Digital Keyboard
Changing the Metronome Tempo
Use the following procedure to change the tempo of the
metronome.
1. Press
.
bn
Use y (slower) and t (faster) to change the tempo
setting. Holding down either button changes the setting at
high speed.
• Pressing y and t at the same time will initialize the
tempo setting in accordance with the currently selected
song or rhythm.
• Pressing
causes the tempo value to flash on the
bn
display. While the tempo value is flashing, you can use
(10-key) to change it.
bo
Note that you must input leading zeros, so 89 is input
as 089.
• The tempo value will stop flashing if you do not perform
any operation for a short while.
Tempo value (flashes)
Changing the Metronome Sound Volume
The metronome volume setting is changed automatically with
the volume level of the currently selected Auto
Accompaniment or song. The metronome volume cannot be
adjusted independently.
• For information about changing the Auto Accompaniment
volume, see page E-33.
• For information about changing the song volume, see page
E-19.
• You cannot adjust the balance between the metronome
and note volume during Auto Accompaniment and built-in
tune play.
E-10
Download from Www.Somanuals.com. All Manuals Search And Download.
Controlling the Keyboard Sounds
3
45
bo
bq br bs bt ck cl cm
3. Try playing something on the keyboard.
Select from a variety of musical
instrument sounds
The tone of the instrument you selected will sound.
Your Digital Keyboard lets you select tones for a wide variety
of musical instrument sounds, including violin, flute, orchestra,
and more. Even the same song sound takes on a different feel
by changing the instrument type.
To select an instrument for playing
1. Press
.
br
Playing with a Piano Tone (Piano Setup)
Tone number
1. Press
and
at the same time.
br
bq
This selects the grand piano tone.
Settings
Tone Number:
Reverb:
Transpose:
Touch Response: Off:Returns to initial default
On:No change
Pedal Effect:
Rhythm Number: “131”
Accompaniment: Rhythm part only
Local Control:
Drum Assign:
“001”
“06”
00
S t . G r P n o
Tone name
2. Use
(10-key) to select the tone number you
bo
SUS
want.
The corresponding tone number and tone name will
appear on the screen.
On
Off
• See the separate “Appendix” for a complete list of available
tones.
• You also can find out instrument numbers using the tone
groups printed on the Digital Keyboard’s console.
• Use the number buttons to enter the tone number. Specify
three digits for the tone number.
Example: To select 001, enter 0 3 0 3 1.
• When one of the drum sets is selected (tone numbers 395
through 400), each keyboard key is assigned a different
percussion sound.
E-11
Download from Www.Somanuals.com. All Manuals Search And Download.
Controlling the Keyboard Sounds
Selecting the Pedal Effect
a number of times until “Jack”
Using Reverb
Reverb adds reverberation to notes. You can change the
1. Press
4
duration of the reverb.
appears on the display (page E-4).
1. Press
a number of times until “Reverb”
appears on the display (page E-4).
4
J a c k
R e v e r b
2. Use the
(10-key) [–] and [+] keys to select the
bo
pedal effect you want.
• The following shows the available pedal effects.
2. Use the
(10-key) [–] and [+] keys to select the
bo
reverb setting you want.
Sustain
(SUS)
Sustains notes played while the pedal is
depressed. Organ and other similar tone
notes are sustained even if the pedal is not
pressed.
Off (oFF)
1 to 10
Turns off reverb.
The larger the number selected, the longer
the reverb duration.
Sostenuto Sustains notes that are playing when the
(SoS)
pedal is depressed before the keyboard keys
are released.
Indicator disappears when reverb is turned off.
Soft
(SFt)
Slightly softens notes played while the pedal
is depressed.
Rhythm
(rHy)
Pressing the pedal starts and stops Auto
Accompaniment or song playback.
R e v e r b
Using a Pedal
A pedal can be use to change notes in various ways while
playing.
• A pedal unit does not come with the Digital Keyboard.
Purchase one separately from your retailer. See page E-1
for information about options.
Connecting a Pedal Unit
Connect an optional pedal unit.
SUSTAIN jack
E-12
Download from Www.Somanuals.com. All Manuals Search And Download.
Controlling the Keyboard Sounds
Changing the Pitch
(Transpose, Tuning)
Sampling a Sound and Playing It
on the Keyboard (Sampling)
You can use the Digital Keyboard to sample a sound from a
microphone, and then play the sound with the keyboard keys
or voice pads. For example, you could sample the bark of
your dog and then use the sound in a melody. The sampling
feature is a great way to create new sounds that are highly
creative.
Changing the Pitch in Semitone Steps
(Transpose)
The transpose feature lets you change the pitch, in semitone
steps. A simple operation lets you instantly change the pitch
to match that of a singer.
• The transpose setting range is –12 to +12 semitones.
Connection
Connect a microphone.
1. Press
.
4
MIC IN jack
T r a n s .
2. Use the
(10-key) [–] and [+] keys to select the
bo
• Use of a commercially available microphone also is
supported.
transpose setting you want.
Fine Tuning (Tuning)
• Turn off the microphone and the Digital Keyboard
before connecting them.
Use the tuning feature when you need to adjust the pitch
slightly to play along with another musical instrument. Also,
some artists perform their music with slightly altered tuning.
You can use the tuning feature to adjust tuning so it exactly
matches a performance on a CD.
• It will take a few seconds before you can use the
microphone after you turn on the keyboard.
• Sampled sounds are recorded in monaural.
• You cannot sample sounds input from through the
AUDIO IN jack.
• The tuning setting range is –99 to +99 cents.
1. Press
a number of times until “Tune”
appears on the display (page E-4).
4
Sampling a Sound and Playing It
There are two sampling methods: full sampling and short
sampling.
■ Full Sampling
This method allows sampling of a single sound with a duration
of one second.
T u n e
1. Turn the volume levels of the Digital Keyboard
2. Use the
(10-key) [–] and [+] keys to adjust the
bo
down.
tuning.
2. Turn on the microphone and then the Digital
Keyboard.
3. Use
to adjust the volume level of
microphone input.
3
4. Press
and immediately release it.
This enters record standby.
5
Flashes
g
W
a i t i n
E-13
Download from Www.Somanuals.com. All Manuals Search And Download.
Controlling the Keyboard Sounds
5. Output the sound from the microphone.
2. While holding down , press the voice pad (
,
bs
5
The Digital Keyboard will start sampling automatically,
and stop after one second.
, or ) that corresponds to the tone number
bt ck
where you want to store the sound.
• The relationship between tone numbers and voice pads
is shown below.
What you sample is stored as tone number 401.
Flashes
Selected Tone
402
403
404
Number
Pressed Voice Pad Pad 1 (
)
Pad 2 (
)
Pad 3 (
)
bs
bt
ck
p
g
Example: When voice pad 3 (Tone Number 404) is
S a m l i n
selected
Flashes
Lights
V o i . P a d 3
g
O r i
i n a l
6. Try playing something on the keyboard.
cl cm
Record standby is entered when you release
Flashes
.
5
• You can press pad 4 or 5 ( or ) to sound the
sampled sound (page E-9).
• Sampling will not start if the volume of the sound picked up
by the microphone is too low.
g
• A new sample replaces sample data currently assigned to
tone number 401. All of the old data (including short
sampled sounds) is deleted.
W
a i t i n
3. Output the sound from the microphone.
■ Short Sampling
Sampling starts automatically and stops after about 0.3
seconds.
With short sampling, you can sample up to three sounds,
each one with a duration of approximately 0.3 seconds. You
can sound the short sampled sounds using voice pads
1 through 3.
Lights
1. Connect a microphone to the keyboard.
Refer to steps 1 through 3 under “Full Sampling” (page
E-13).
V o i . P a d 3
4. Try playing something on the keyboard.
You also can sound the sampled sound by pressing the
voice pad you pressed in step 2.
• Sampling will not start if the volume of the sound picked up
by the microphone is too low.
• Sampling a new sound deletes the sound assigned to the
same tone number and the full sampling sound (page
E-13).
E-14
Download from Www.Somanuals.com. All Manuals Search And Download.
Controlling the Keyboard Sounds
Turning off power clears sampled data!
Applying Effects to a Sampled Sound
Turning off power will causes all sampled sound data to be
deleted.
You can use the following procedure to apply various settings
to the sampled tone assigned to tone number 401.
■ How sampled sounds are played
1. Use
(10-key) to select a tone number from
bo
405 to 414.
Pressing Middle C (C4) will play back the original sound. The
keys to the left and right of C4 play the sound at different
pitches.
Tone numbers 405 to 414 actually represent effects
assigned to tone number 401. Selecting a tone will play
the sampled sound in a loop, along with the applicable
effect, as described below.
Tone
No.
Effect
Name
Description
C4
405 Loop 1
Loops the sampled sound.
Set 1 of voice pads 1 through 4 ( through ) produce
sampled sounds without modification.
bs
cl
Loops the sample sound and raises the
pitch of the resonating sound when the
keyboard key is released.
406 Loop 2
Starting a Sampling Operation Manually
a number of times until “SmplAuto”
Loops the sample sound and lowers
the pitch of the resonating sound when
the keyboard key is released.
407 Loop 3
1. Press
4
appears on the display (page E-4).
Changes the pitch from low to high, at
an increasing rate.
408 Pitch 1
409 Pitch 2
Changes pitch from high to low, at a
decreasing rate.
Changes pitch from high to low, at a
decreasing rate, and then raises the
pitch when the key is released.
p
S m l A u t o
410 Pitch 3
Alternates volume between high and
low.
2. Press the
(10-key) [–] key to select the OFF
bo
411 Tremolo
412 Funny 1
413 Funny 2
414 Funny 3
setting.
This enables manual sampling. When this setting is
selected, sampling starts as soon as you release
step 4 under “Full Sampling” (page E-13) or step 2 under
Adds vibrato and changes pitch by a
gradually increasing amount.
in
5
Alternates between high pitch and low
pitch.
“Short Sampling” (page E-14).
Adds vibrato and changes pitch from
low to high.
• When the above setting is “oFF”, sampling starts when
you release , not when you press it. Sampling will not
5
start if you keep
depressed.
5
E-15
Download from Www.Somanuals.com. All Manuals Search And Download.
Controlling the Keyboard Sounds
Using a Sampled Sound in a
Rhythm (Drum Assign)
Use the following procedure to replace a percussive
instrument with a sampled sound you sampled with short
sampling and play auto accompaniment rhythms (page E-29)
with it.
1. Press
and
at the same time.
4
5
Lights
g
D r m A s i n
The display will return to the previous screen if you do not
perform the next step for some time.
2. Use the
(10-key) [–] and [+] keys to select the
drum assign type you want.
bo
Off (oFF)
Sampled sound does not sound.
Type 1 (dr1) Replaces the bass drum of the rhythm
pattern with tone number 402, and the
snare drum with tone number 403.
Type 2 (dr2) Replaces more of the percussive
instruments than Type 1 with tone numbers
402, 403, and 404.
3. Start rhythm play (page E-29).
The rhythm sounds in accordance with the drum assign
type you selected in step 2.
• If the rhythm does not include a bass drum and snare drum,
the sampled sound will not sound while Type 1 is selected.
• Rhythm numbers 140, and 142 to 150 do not use
percussive instruments, so the sampled sound does not
sound when these rhythm numbers are selected.
E-16
Download from Www.Somanuals.com. All Manuals Search And Download.
Playing Built-in Songs
4
bo
7 8 9 bk bl bm bn bp
With this Digital Keyboard, built-in tune data is referred to as
“songs”. You can listen to the built-in songs for your own
enjoyment, or you can play along with them for practice.
Playing Back a Particular Song
Use the procedure below to play back one of the built-in
songs. You can play along on the keyboard with song
playback.
• In addition to simple listening enjoyment, the built-in songs
can be used with the lesson system (page E-21) for
practice.
Start/Stop
1. Press
.
bp
Playing the Demo Songs
Lights
Song number
Lights
Use the following procedure to play back built-in songs (001 to
090).
1. Press
and
at the same time.
bm
bl
T w i n k l e
This will start playback of the demo songs. Demo
playback continues until you stop it.
Tune name
• Song list are printed on the Digital Keyboard’s console.
• Demo playback always starts from song number 001.
2. Use
(10-key) to enter the number of the song
bo
you want.
Flashes
Song number
• Song list are printed on the Digital Keyboard’s console.
T w i n k l e
Tune name
2. To change to another song while demo
playback is in progress, use
(10-key) [–] and
bo
[+] keys to enter the song number you want
(page E-4).
This will cause demo playback to jump to the song whose
number you entered.
• You cannot use
song.
(10-key) number buttons to select a
bo
3. To stop demo playback, press
.
bl
Demo playback continues until you stop it by pressing
.
bl
E-17
Download from Www.Somanuals.com. All Manuals Search And Download.
Playing Built-in Songs
3. Press
.
■ Skip Forward
bl
This starts playback of the song. Keyboard keys will light
as notes are played.
1. Press
.
9
This skips song playback forward to the next measure.
Each press of skips ahead one measure. Holding
Sustain pedal
Key
9
Note
down
skips forward at high speed until you release it.
9
• Pressing
while song playback is stopped performs
9
lesson function phrase skip forward (page E-22).
g
M o o n l i
h
Tempo
Fingering
Measure Beat
Measure number
■ Skip Back
4. Press
again to stop playback.
Song playback will continue (repeat) until you press
bl
to
bl
1. Press
.
8
stop it. You can cancel song repeat by pressing
(“REPEAT” indicator disappears from the display).
7
This skips song playback back to the previous measure.
Each press of skips back one measure. Holding down
8
skips back at high speed until you release it.
8
Pause, Skip Forward, Skip Back
• Pressing
while song playback is stopped performs
8
lesson function phrase skip back (page E-22).
Use the operations in this section to perform pause, skip
forward, and skip back operations.
Repeating Playback of Specific Measures
■ Pause
You can use the procedure in this section to repeat particular
measures for practice playing along until you master it. You
can specify the start measure and the end measure of the
section you want to play and practice.
1. Press
.
bk
This pauses song playback.
2. Press
again to resume playback from the
point where you paused it.
Start
End
bk
These measures are repeated.
1. Press
to temporarily turn off song repeat
(“REPEAT” disappears from the display).
7
2. When song playback reaches the measure you
want to specify as the start measure, press
This specifies the measure as the start measure.
.
7
Flashes
T w i n k l e
E-18
Download from Www.Somanuals.com. All Manuals Search And Download.
Playing Built-in Songs
Adjusting the Song Volume
3. When playback reaches the measure you want
to select as the end measure, press again.
7
Use the following procedure to adjust the balance between
the volume of what you play on the keyboard and song
playback volume.
This specifies the measure as the end measure and starts
repeat playback of the measures in the specified range.
• During repeat play you can use
to pause playback,
bk
to skip forward, or
to skip back.
9
8
1. Press
a number of times until “Song Vol”
appears on the display (page E-4).
4
Lights
g
T w i n k l e
S o n
V o l
4. Pressing
again returns to normal playback.
7
2. Use the
(10-key) [–] and [+] keys to adjust the
bo
Changing the song number clears the start measure and
end measure of the repeat operation.
song volume.
Disappears
Playing with the Tone as Song Playback
The procedure below lets you select the same keyboard tone
as the one being used in the song and play along with your
favorite tunes.
T w i n k l e
1. After selecting a song, hold down
for about
bp
two seconds until the displayed tone name
changes to the tone name of the song.
• If your currently selected tone is the same as the song
tone, the display contents will not change.
Changing Playback Speed (Tempo)
You can use the following procedure to change the speed
(tempo) in order to slow down playback to practice difficult
passages, etc.
2. Play along with song playback.
1. Press
.
bn
Use y (slower) and t (faster) to change the tempo
setting. Holding down either button changes the setting at
high speed.
• Pressing y and t at the same time will return the
current song to its original default tempo.
• If you select a song that uses different tones for left and
right hand play, the right hand part tone is assigned to the
keyboard.
• Pressing
causes the tempo value to flash on the
bn
display. While the tempo value is flashing, you can use
(10-key) to change it. The tempo value will stop
bo
flashing if you do not perform any operation for a short
while.
• Changing the song number will return the song to its
original default tempo.
E-19
Download from Www.Somanuals.com. All Manuals Search And Download.
Playing Built-in Songs
Turning Off the Part of One Hand for Practice
(Part Select)
You can turn off the right hand part or the left hand part of a
song during playback and practice playing the along with the
remaining part.
1. Press
to select the part you want to turn off.
bm
Each press of
below.
cycles through the settings shown
bm
Right hand part off
Left hand part off
Both hand parts off
Both hand parts on
2. Press
.
bl
This starts playback in accordance with the setting you
selected in step 1.
• During playback with one part turned off, only the notes of
the part that is turned off are shown on the display.
E-20
Download from Www.Somanuals.com. All Manuals Search And Download.
Using Built-in Songs to Master Keyboard Play
4
bo
7 8 9 bl bm
bp
bs bt ck cl cm
To master a song, it is best to break it up into shorter parts
Step Up Lesson Flow
Step Up Lesson takes you through practice of the right hand
part, left hand part, and both hand parts for each phrase of a
song. Master all of the phrases and you master the song.
(phrases), master the phrases, and then put everything
together. Your Digital Keyboard comes with a Step Up Lesson
feature that helps you to do just that.
Phrases
Phrase 1
• Right Hand Lesson 1, 2, 3
• Left Hand Lesson 1, 2, 3
• Both Hand Lesson 1, 2, 3
The built-in songs are pre-divided into phrases to help you
master keyboard play.
Song start
Song end
4
Repeat the above to practice phrase
2, 3, 4, and so on, until you reach the
final phrase of the song.
Final
Phrase
Phrase 1
Phrase 2
Phrase 3
. . . .
4
After mastering all of the phrases,
practice the entire song.
4
Now you have mastered the entire
song!
E-21
Download from Www.Somanuals.com. All Manuals Search And Download.
Using Built-in Songs to Master Keyboard Play
Messages that Appear during Lessons
2. Press
(or ) to move forward one phrase, or
to move back one phrase.
cl
9
8
The following are the messages that appear on the display
during Step Lessons.
• Holding down
speed.
or
scrolls through phrases at high
9
8
• The keyboard remembers the last phrase you practiced
for up to 20 songs. To recall the last practice phrase for
Message
Description
<Phrase>
Appears when you select a phrase, when a
lesson starts, etc.
• Note that certain phrases will cause “Wait”
to appear instead of “Phrase”.
the current song (if it is available), hold down
.
cl
Phrase number
<Wait>
Appears when the lesson starts with an intro
or fill-in phrase that is not included in the
phrases to be practiced. Play toll advance
automatically to the next phrase after the un-
included phrase plays, so wait until then to
start playing on the keyboard.
<
>
P h r a s e
NextPhrs
Appears when advancing automatically to the
next phrase. This message appears following
a phrase for which “Wait” (see above) is
displayed, and during an Auto Step Up Lesson
(page E-25).
First measure of the selected phrase
From Top
Complete
This message appears during Auto Step Up
Lesson (page E-25) immediately before
practice from Phrase 1 up until the phrase
currently being practiced.
3. Press
to select the part you want to practice.
bm
Each press of
shown below.
cycles through the settings
bm
Appears at the end of Auto Step Up Lesson
(page E-25).
Right hand practice
Selecting the Song, Phrase, and
Part You Want to Practice
Left hand practice
Both hand practice
*
First, select the song, phrase, and part you want to practice.
1. Select the song you want to practice (page
E-17).
This will select the first phrase of the song.
* This indicator (setting) is skipped if you press
while a
bm
lesson is in progress.
4. Hold down
for about two seconds.
The same tone used for song playback will be assigned to
the keyboard (page E-19).
bp
E-22
Download from Www.Somanuals.com. All Manuals Search And Download.
Using Built-in Songs to Master Keyboard Play
2. Play notes on the keyboard in accordance with
the instructions provided on the display and by
voice fingering guide.
Lessons 1, 2, and 3
Now it is time to start the lessons. First, select the song and
part you want to practice.
During this lesson, the display shows the key you need to
press next. Voice fingering guide uses a simulate voice to
announce which finger you should use.
Lesson 1: Listen to the song.
First, listen to the example a few times to familiarize yourself
with what it sounds like.
1. Press
.
bs
Flashes
Lights
This starts example play.
Lights
<
>
P h r a s e
<Lesson 2 Guidance>
Lights
Master playing the correct note with the correct finger
as instructed by the guidance. Practice playing with the
correct timing.
4
2. To stop Lesson 1, press
or
bs bl
.
Song playback will wait for you to play the correct note.
• Keyboard key goes from flashing to lit.
• Note guide sounds the correct note to be played.
• Voice Fingering Guide tells you what finger to use.
Lesson 2: Watch how the song is played.
Play the song on the keyboard. During this lesson, the display
shows the key you need to press next. Voice fingering guide
also uses a simulate voice to announce which finger you
should use. Follow the instructions to press the correct
keyboard keys and play the notes. Don’t worry if you play the
wrong note. Song playback will wait until you play the correct
note. Take your time and play at your own pace.
4
Pressing the correct keyboard key causes song
playback to resume and the key for the next note
flashes.
3. To stop Lesson 2, press
or
bt bl
.
1. Press
.
bt
This starts Lesson 2.
● If you complete Lesson 2 play to the end, a score that
rates your play appears on the screen.
Lights
Bravo!
Again!
You pass! Advance to the next lesson.
Go back and try again.
<
>
P h r a s e
Lights
E-23
Download from Www.Somanuals.com. All Manuals Search And Download.
Using Built-in Songs to Master Keyboard Play
Lesson 3: Remember what you learned as
you play.
Playing a Particular Song All the Way
Through
Though song playback stands by waiting for you to press the
correct keys as in Lesson 2, the Digital Keyboard does not
provide any guidance about what note you need to play next.
Remember everything you have learned up to Lesson 2 as
you play.
After you successfully complete all of the phrases in Lessons
1, 2, and 3, it is time to try playing the entire song from
beginning to end.
1. Use
to turn off both hand parts and then
bm
press
.
bl
1. Press
.
ck
Try playing with both hands and find out how the Digital
Keyboard evaluates your effort.
This starts Lesson 3.
Lights
Lesson Settings
Playing without Phrase Repeat
You can turn off phrase repeat for Lessons 1, 2, and 3.
<
>
P h r a s e
1. Press
.
7
This disables phrase repeat play.
Disappears
Lights
2. Play the song along with the song playback.
T w i n k l e
<Lesson 3 Guidance>
Press the keyboard keys you learned in Lesson 2.
Turning Off Voice Fingering Guide
4
Use the following procedure to turn off voice fingering guide,
which tells you which finger to use to play each note in
Lesson 2 and Lesson 3.
Song playback will wait for you to play the correct note.
• Note guide sounds the correct note to be played.
4
1. Press
a number of times until “Speak”
appears on the display (page E-4).
4
If you are still unable to press the correct keyboard
key, the Digital Keyboard will display keyboard
guidance and voice fingering guide will tell you what
finger to use, just as in Lesson 2.
4
p
S e a k
Pressing the correct key will cause song playback to
resume.
2. Press the
(10-key) [–] key to select the OFF
bo
setting.
3. To stop Lesson 3, press
or
ck bl
.
• If you complete Lesson 3 play to the end, a score that
rates your play appears on the screen the same as with
Lesson 2.
Indicator disappears
when voice fingering
guide is turned off.
E-24
Download from Www.Somanuals.com. All Manuals Search And Download.
Using Built-in Songs to Master Keyboard Play
Turning Off Note Guide
Using Auto Step Up Lesson
With Auto Step Up Lesson, the Digital Keyboard advances
Use the following procedure to turn off note guide, which
sounds the note to be played next in Lesson 2 and Lesson 3.
through each lesson automatically.
1. Press
a number of times until “NoteGuid”
appears on the display (page E-4).
4
1. Select the song and part you want to practice
(page E-17).
2. Press
.
cm
Listen to the first phrase in Lesson 1.
• In Lesson 1, the sample phrase is played only once
before advancing to Lesson 2.
N o t e G u i d
Flashes
Lights
2. Press the
(10-key) [–] key to select the OFF
bo
setting.
Turning Off Performance Evaluation
3. Auto Step Up Lesson stops automatically after
you are able to get through all of the lessons
successfully.
Use the following procedure to turn off performance
evaluation, which evaluates your performance and displays a
score in Lesson 2 and Lesson 3.
• In Lesson 2 and Lesson 3, the Digital Keyboard
advances to the next lesson if you are able to achieve
the “Bravo!” evaluation result.
1. Press
a number of times until “Scoring”
appears on the display (page E-4).
4
• To cancel a lesson, press
or
cm bl
.
• You can change the step and phrase during Auto Step Up
Lesson using , and to
• Starting Auto Step Up Lesson turns on Phrase Repeat
(page E-24), Note Guide (page E-25) and Performance
Evaluation (page E-25) automatically. These features
cannot be turned off during lessons.
,
.
bs cl
8 9
g
S c o r i n
2. Press the
(10-key) [–] key to select the OFF
bo
setting.
Indicator disappears
when performance
evaluation is turned off.
Lesson Play without Dividing Songs into
Phrases
When the phrase function is turned off, lessons go through an
entire song from beginning to end, without dividing it up
between phrases.
1. Press
a number of times until “PhraseLn”
appears on the display (page E-4).
4
P h r a s e L n
2. Press the
(10-key) [–] key to select the OFF
bo
setting.
E-25
Download from Www.Somanuals.com. All Manuals Search And Download.
Using Built-in Songs to Master Keyboard Play
■ Auto Step Up Lesson Procedure
Phrase 1
Lesson 1
4
Lesson 2
4
Lesson 3
4
Phrase 2
Lesson 1
4
Lesson 2
4
Lesson 3
4
Phrase 1, 2
• Lesson 3*
4
Phrase 3
Lesson 1
4
Lesson 2
4
Lesson 3
4
Phrase 1, 2, 3
• Lesson 3*
4
Next phrase practice using the same
procedure
4
Final phrase
Lesson 1
4
Lesson 2
4
Lesson 3
4
From Phrase 1 to the final phrase
• Lesson 3*
4
Lesson complete
* Auto Step Up Lesson advances to the next phrase,
regardless of whether the “Bravo!” result is attained.
E-26
Download from Www.Somanuals.com. All Manuals Search And Download.
Music Challenge Keyboard Game
1
bl
bp bq br
cn
Music Challenge is a game that measures your reaction
speed as you press keys in response to keyboard keys that
light and to on-screen fingering guide indications.
3. After the keyboard key changes from flashing
to lit, press the key with the finger indicated on
the screen as quickly as possible.
This causes the lighting of the key you press to go out,
indicating you have cleared the first note. The next key
will start flashing, so get ready to press it next.
• The time it takes you to press the keyboard key after it
lights appears on the display (Unit: 0.1sec). The shorter
the time, the higher your score.
1. Press
2. Press
.
.
bp
cn
This causes a keyboard key to start flashing, and starts
the Music Challenge song.
• Pressing a key before it goes from flashing to lit, will not
advance to the next note.
Time 0.3sec
M . C H A L . !
Fingering
Number of remaining notes
Displayed during a game.
E-27
Download from Www.Somanuals.com. All Manuals Search And Download.
Music Challenge Keyboard Game
4. The game ends when you advance successfully
through 20 notes.
• Your score and playing time appear on the display.
After a short while, the playing time display changes to
an evaluation result. To clear the evaluation result from
the display, press
,
, or
.
bp bq br
• You can cancel a game at any time by pressing
or
cn
.
bl
Score
T i m e 1 9 . 2
Playing time
G r a d e : A
Evaluation result
Evaluation Result
S
A
B
C
D
<High>
Evaluation Ranges
<Low>
• Notes and fingering guide fingers are indicated randomly.
• The tempo of the game songs cannot be changed.
• All buttons except
is in progress.
,
1 bl
, and
are disabled while a game
cn
E-28
Download from Www.Somanuals.com. All Manuals Search And Download.
Using Auto Accompaniment
4
bo
7 8 9 bk bl bm bn
bq
With Auto Accompaniment, simply select an accompaniment
pattern. Each time you play a chord with your left hand the
appropriate accompaniment will play automatically. It’s like
having a personal backup group along with you wherever you
go.
Starting and Stopping the Rhythm Part Only
1. Press
.
bq
Rhythm number
• Auto Accompaniments are made up of the following three
parts.
(1) Rhythm
(2) Bass
F u n k
8 B t
Rhythm pattern name
(3) Harmony
2. Use
(10-key) to select the rhythm number
you want.
bo
You can have only the rhythm part play, or you can have all
three parts play at the same time.
• See the separate “Appendix” for information about
individual rhythms.
• You also can find out rhythm numbers using the rhythm
groups printed on the Digital Keyboard’s console.
Playing the Rhythm Part Only
The rhythm part is the foundation each Auto Accompaniment.
Your Digital Keyboard comes with a variety of built-in rhythms,
including 8-beat and waltz. Use the following procedure to
play the basic rhythm part.
3. Press
or
.
8
bl
This starts the rhythm.
This pattern changes with each beat.
4. Play along with the rhythm.
5. To stop the rhythm, press
again.
bl
E-29
Download from Www.Somanuals.com. All Manuals Search And Download.
Using Auto Accompaniment
5. Pressing
again returns to rhythm only
accompaniment.
bm
Playing All Parts
Auto Accompaniment with Chords
• For information about starting Auto Accompaniment as
soon as a chord is played, see “Using Synchro Start” on
page E-33.
Playing a chord with your left hand automatically adds bass
and harmony accompaniment parts to the currently selected
rhythm. It is just like having your own personal back up group
on call.
Selecting a Chord Input Mode
1. Start play of the Auto Accompaniment rhythm
You can select from among the following five chord input
modes.
part.
• FINGERED 1
• FINGERED 2
• FINGERED 3
• CASIO CHORD
• FULL RANGE CHORD
2. Press
.
bm
This enables chord input on the accompaniment
keyboard.
Accompaniment keyboard
1. Hold down
until the chord input mode
selection screen appears on the display.
bm
Chord input mode
Lights
C h o r d
2. Use the
(10-key) [–] and [+] keys to select the
chord input mode you want.
bo
3. Use the accompaniment keyboard to play
• If you do not perform any operation after the chord input
mode selection screen appears, the display will return
automatically to the screen that was displayed before
chords.
This will cause bass and harmony Auto Accompaniment
parts to be added to the rhythm part.
you held down
.
bm
Chords
(no melody played)
Melody
F3
Example: Pressing D-F#-A-C on the accompaniment keyboard
4
Accompaniment for the D-F#-A-C chord (D7) sounds.
4. Play other chords with left hand as you play the
melody with your right hand.
E-30
Download from Www.Somanuals.com. All Manuals Search And Download.
Using Auto Accompaniment
CASIO CHORD Fingering
Chord Type
Major Chords
Letters above the accompaniment
keyboard indicate the chord assigned
to each key. Pressing a single
accompaniment area key in the
CASIO CHORD mode will play the
major chord whose name is marked
above the key. All of the
■ FINGERED 1, 2, and 3
With these three input modes, you play chords on the
accompaniment keyboard using their normal chord fingerings.
Some chord forms are abbreviated, and can be fingered with
one or two keys. See the separate “Appendix” for information
about chords that are supported and how they are fingered on
the keyboard.
Example
C (C Major)
F#G A A Bb B C C#DEb F
E
b
C
C#DEb E
F
Accompaniment keyboard
accompaniment area keys that are
marked with the same chord name
play exactly the same chord.
Minor Chords
Cm (C Minor)
● FINGERED 1
Play the component notes of the chord on
the keyboard.
C
F#G A A Bb B C C#DEb
E
F
b
C#DEb E
F
To play a minor chord, press the
accompaniment area key that
corresponds to the major chord, while
also pressing one other
accompaniment area key to the right.
● FINGERED 2
Seventh Chords
C7 (C Seventh)
Unlike FINGERED 1, 6th input is not
possible. m7 or m7 5 is input.
b
C
C#DEb E
F
F#G A A Bb B C C#DEb
E
F
b
To play a seventh chord, press the
accompaniment area key that
corresponds to the major chord, while
also pressing two other
● FINGERED 3
accompaniment area keys to the right.
Unlike FINGERED 1, allows input of
fraction chords with the lowest keyboard
note as the bass note.
Minor Seventh Chords
To play a minor seventh chord, press (C Minor Seventh)
Cm7
C
C#DEb E
F
F#G A A Bb B C C#DEb
E
F
b
the accompaniment area key that
corresponds to the major chord, while
also pressing three other
accompaniment area keys to the right.
■ CASIO CHORD
With CASIO CHORD, you can use
simplified fingerings to play the four types
of chords described below.
• When playing a minor, seventh, or minor seventh chord, it
makes no different whether the additional keys you press
are black or white.
Accompaniment keyboard
■ FULL RANGE CHORD
With this mode, you can use the full range
of the keyboard to play chords and the
melody.
See the separate “Appendix” for
information about chords that are
supported.
Accompaniment keyboard / Melody keyboard
E-31
Download from Www.Somanuals.com. All Manuals Search And Download.
Using Auto Accompaniment
■ Auto Accompaniment Fill-in
Use the procedure below to play a fill-in pattern during a
performance.
• A “fill-in” is a short phrase played where you want to change
the mood of a piece. A fill-in pattern can be used to create a
link between two melodies or an accent.
• Normal and variation patterns have their own unique fill-in
patterns.
Using Auto Accompaniment
Effectively
Auto Accompaniment Pattern Variations
Use the following procedures to play intro and ending
patterns, to play fill-in patterns, and to play variations of basic
Auto Accompaniment patterns.
● Normal Pattern Fill-in
■ Auto Accompaniment Variation
Each Auto Accompaniment pattern has a basic “normal
pattern” as well as a “variation pattern”.
1. While a normal pattern is playing, press
.
8
This plays the fill-in for the normal pattern.
• Normal pattern play will resume after the fill in pattern is
complete.
1. Press
.
9
Lights
This starts the variation pattern.
Lights
● Variation Pattern Fill-in
1. While a variation pattern is playing, press
.
9
2. Pressing
again returns to normal pattern.
8
This plays the fill-in for the variation pattern.
Lights
• Variation pattern play will resume after the fill in pattern
is complete.
Lights
■ Auto Accompaniment Intro
Use the following procedure to play an intro of a few
measures.
■ Auto Accompaniment Ending
Use the following procedure to play an ending of a few
measures.
1. Press
.
7
This starts the intro pattern. Normal pattern play will start
when the intro pattern is finished.
1. While an Auto Accompaniment is playing, press
• If you press
the variation pattern will start when the intro pattern is
finished.
while an intro pattern is being played,
9
.
bk
This will play the ending pattern and then stop Auto
Accompaniment play automatically.
Lights
Lights
E-32
Download from Www.Somanuals.com. All Manuals Search And Download.
Using Auto Accompaniment
■ Using Synchro Start
Adjusting the Accompaniment Volume
Use the following procedure to configure the Digital Keyboard
to start Auto Accompaniment play as soon as you press a
keyboard key.
Use the following procedure to adjust the balance between
what you are playing on the keyboard and the volume of the
Auto Accompaniment.
1. Press
.
bk
1. Press
a number of times until “AcompVol”
appears on the display (page E-4).
4
This enters accompaniment start standby.
Flashes
p
A c o m V o l
2. Play a chord on the keyboard.
2. Use the
(10-key) [–] and [+] keys to adjust the
bo
This will start full part accompaniment (normal).
accompaniment volume.
Any of the following operations can be performed while in
synchro standby to start a non-normal pattern.
Using One-Touch Preset
• To start with intro pattern, press
.
7
• To start with variation pattern play, press
.
With One-Touch Preset, the Digital Keyboard automatically
configures optimal tone, tempo, and other settings in
accordance with the rhythm pattern you select.
9
Changing Auto Accompaniment Speed
(Tempo)
1. Hold down
until the current tone screen
appears on the display.
bq
Use the following procedure to change Auto Accompaniment
speed to a level that suits you.
This will automatically apply the One-Touch Preset
settings in accordance with the rhythm pattern that is
currently selected.
1. Press
.
bn
Use y (slower) and t (faster) to change the tempo
setting. Holding down either button changes the setting at
high speed.
2. Play a chord on the keyboard.
This will start accompaniment automatically.
• Pressing y and t at the same time will initialize the
rhythm setting in accordance with the currently selected
rhythm.
• While the tempo value is flashing, you also can use
(10-key) to change it.
bo
• If you do not perform any operation for after the tempo
setting screen appears, the display will return to the
screen displayed before you pressed
.
bn
Flashes
E-33
Download from Www.Somanuals.com. All Manuals Search And Download.
Connecting External Devices
4
bo
bm
Connecting the Keyboard to Your Computer
Connecting a Computer
You can connect the Digital Keyboard to a computer and
exchange MIDI data between them. You can send play data
from the Digital Keyboard to music software running on your
computer, or you can send MIDI data from your computer to
the Digital Keyboard for playback.
• Make sure you follow the steps of the procedure below
exactly. Connecting incorrectly can make data send
and receive impossible.
1. Turn off the keyboard and then start up your
Minimum Computer System Requirements
computer.
• Do not start up the music software on your computer
yet!
The following shows the minimum computer system
requirements for sending and receiving MIDI data. Check to
make sure that your computer complies with these
requirements before connecting the keyboard to it.
2. After starting up your computer, use a
commercially available USB cable to connect it
to the keyboard.
• Operating System
Windows® XP (SP2 or later)*1
Windows Vista® *2
Keyboard USB port
Mac OS® X (10.3.9, 10.4.11 or later, 10.5.2 or later)
B connector
*1: Windows XP Home Edition
Windows XP Professional (32- bit)
*2: Windows Vista (32- bit)
USB cable
(A-B type)
• USB port
A connector
• Never connect to a computer that does not conform to
the above requirements. Doing so can cause problems
with your computer.
Computer USB port
3. Turn on the keyboard.
• If this is the first time you are connecting the keyboard
to your computer, the driver software required to send
and receive data will be installed on your computer
automatically.
4. Start up your computer’s music software.
E-34
Download from Www.Somanuals.com. All Manuals Search And Download.
Connecting External Devices
5. Configure the music software settings to select
MIDI Settings
one of the following as the MIDI device.
CASIO USB-MIDI: (For Windows Vista, Mac OS X)
USB Audio Device:(For Windows XP)
Keyboard Channel
• For information about how to select the MIDI device,
see the user documentation that comes with the music
software you are using.
A keyboard channel is the channel used for sending Digital
Keyboard data to a computer. You can select the channel you
want for sending Digital Keyboard data to a computer.
• The keyboard channel setting range is 01 to 16.
1. Press
a number of times until “Keybd Ch”
appears on the display (page E-4).
4
• Be sure to turn on the keyboard first before starting up
your computer’s music software.
• USB send and receive is disabled during playback of a
Song Bank song (page E-17), or while the keyboard is
lighting during a power on alert operation. Whenever
you plan to exchange data between your keyboard and
computer, first turn off power on alert (page E-6).
y
K e b d C h
• Once you are able to connect successfully, there is no
problem with leaving the USB cable connected when you
turn off your computer and/or keyboard.
• This Digital Keyboard conforms to General MIDI Level 1
(GM).
• For detailed specifications and connections that apply to
MIDI data send and receive by this keyboard, see the latest
support information provided by the website at the following
URL.
2. Use the
(10-key) [–] and [+] keys to change
the keyboard channel.
bo
Navigate Channels
The navigate channels can be used to display only the notes
of a particular channel (part) as on-screen guide information
from among the note information of a tune sent from the
computer.
■ Specifying the Navigate Channels
From among the 16 available channels (numbered 1 to 16),
you can specify any two neighboring channels (such as 05
and 06) as navigate channels. The smaller numbered channel
is the navigate (L) channel, while the larger numbered
channel is the navigate (R) channel. Specifying the navigate
(R) channel will automatically configure the navigate (L)
channel as well.
1. Press
a number of times until “Navi. Ch”
appears on the display (page E-4).
4
N a v i . C h
2. Use the
(10-key) to specify the navigate (R)
bo
channel.
This also will automatically configure the next lower
channel number as the navigate (L) channel.
E-35
Download from Www.Somanuals.com. All Manuals Search And Download.
Connecting External Devices
■ Turning Off the Navigate Channel Sound and
Playing the Part on the Keyboard
Local Control
There are times when exchanging data with a computer when
you may not want the Digital Keyboard to sound notes you
play on its keyboard. The local control setting lets you do just
that.
You can turn off the sound on one or both of the navigate
channels and play the cancelled part on the keyboard
yourself.
1. Press
to select the channel setting you want
to turn off.
bm
1. Press
a number of times until “Local”
appears on the display (page E-4).
4
Each press of
cycles through settings (1) thorough (4)
bm
described below.
• If you turn off one channel, you can play the cancelled
part on the keyboard using the same tone as the
channel you turned off. If you turn off both channels
(option (3)), what you play on the keyboard sounds
using the tone of the navigate (R) channel.
L o c a l
Selected channel indicator appears.
2. Use the
(10-key) [–] and [+] keys to specify
bo
the local control setting.
Accomp Out
Enabling the Accomp Out setting causes Auto
Accompaniment data to be sent to the computer.
Navigate (L)
Channel
Navigate (R)
Channel
1. Press
a number of times until “AcompOut”
appears on the display (page E-4).
4
On-
On-
Sound screen Sound screen
Guide
Guide
(1) R only displayed
(2) L only displayed
(3) LR displayed
{
×
×
×
{
×
{
×
{
{
{
p
A c o m O u t
×
{
{
(4) LR nor displayed
{
{
2. Use the
(10-key) [–] and [+] keys to turn
bo
Accomp Out on or off.
E-36
Download from Www.Somanuals.com. All Manuals Search And Download.
Connecting External Devices
Connecting to Audio Equipment
This keyboard can be connected to commercially available
stereo, amplifier, or recording equipment, to a portable audio
player or other equipment.
Outputting Keyboard Notes to Audio
Equipment
Connection requires commercially available connecting cords,
supplied by you. The connecting cords should have a stereo
standard plug on one end and a plug that matches the
configuration of the external device on the other end.
• Turn off the external device when making connections.
After connecting, turn down the keyboard and external
device volume levels whenever turning power on or off.
• After connecting, turn on the Digital Keyboard and then
the external device.
• If keyboard notes sound distorted when they are
sounded from external audio equipment, lower the
keyboard’s volume setting.
Keyboard PHONES/OUTPUT jack
Audio equipment, amplifier,
etc.
Stereo standard plug
Playing an External Device from the
Keyboard
Connection requires commercially available connecting cords,
supplied by you. The connecting cords should have a stereo
mini plug on one end and a plug that matches the
configuration of the external device on the other end.
• Turn off the keyboard when making connections. After
connecting, turn down the keyboard and external
device volume levels whenever turning power on or off.
• After connecting, turn on the external device and then
the Digital Keyboard.
• If notes are distorted when they are sounded on the
external device, lower the volume setting of the
external device.
Keyboard AUDIO IN jack
Portable audio player, etc.
Stereo mini plug
E-37
Download from Www.Somanuals.com. All Manuals Search And Download.
Reference
Troubleshooting
Symptom
Action
Included Accessories
I can’t find something that should be here.
Power Requirements
Carefully check inside all of the packing materials.
Power will not turned on.
• Check the AC adaptor or make sure that the batteries are facing
correctly (page E-5).
• Replace the batteries with new ones or switch over to AC adaptor
power (page E-5).
The Digital Keyboard outputs a loud sound and then Replace the batteries with new ones or switch over to AC adaptor
suddenly powers down. power (page E-5).
The Digital Keyboard suddenly powers down after a This happens when Auto Power Off (page E-6) is triggered.
few minutes.
Display
If I don’t play anything for a few minutes, keyboard
Turn off the power on alert feature (page E-6).
keys suddenly start flashing. Things return to normal
after I press a keyboard key or a button.
The display keeps going out or are flashing.
Replace the batteries with new ones or switch over to AC adaptor
power (page E-5).
On-screen keyboard keys or notes remain on the
display.
A Step Up Lesson is in progress and the Digital Keyboard is waiting for
you to play the next note in the song. To stop this from happening,
cancel the lesson (page E-23).
Screen contents are visible only from straight ahead. This is dues to production limitations. It does not indicate malfunction.
Sound
Nothing happens when I press any keyboard key.
• Adjust the main volume setting (page E-6).
• Check if something is plugged into the PHONES/OUTPUT jack (
on the back of the Digital Keyboard.
)
dn
• Turn power off and then back on to initialize all keyboard settings
(page E-6).
Nothing happens or notes do not play normally when Press
to disable chord input in the accompaniment keyboard area
bm
I play notes on the left side of the keyboard.
(page E-30).
Nothing happens when I start an Auto
Accompaniment.
• With rhythms 140, and 142 to 150, nothing will sound until you play
a chord on the keyboard. Try playing a chord (page E-30).
• Check and adjust the accompaniment volume setting (page E-33).
• Turn power off and then back on to initialize all keyboard settings
(page E-6).
Nothing happens when I start playback of a built-in
song.
• It takes a little time after you press the button until the song starts to
play. Wait for a moment for the song to start.
• Check and adjust the song volume (page E-19).
• Turn power off and then back on to initialize all keyboard settings
(page E-6).
The metronome does not sound.
• Check and adjust the accompaniment volume setting (page E-33).
• Check and adjust the song volume (page E-19).
• Turn power off and then back on to initialize all keyboard settings
(page E-6).
Notes keep sounding, without stopping.
• Turn power off and then back on to initialize all keyboard settings
(page E-6).
• Replace the batteries with new ones or switch over to AC adaptor
power (page E-5).
E-38
Download from Www.Somanuals.com. All Manuals Search And Download.
Reference
Symptom
Action
Some notes are cut off while they are playing.
Notes are cut off whenever the number of notes being sounded
exceeds the maximum polyphony value of 48 (24 for some tones). This
does not indicate malfunction. See “Maximum Polyphony” in the “Tone
List” in the separate “Appendix”.
The volume or tone setting I made has changed.
• Adjust the main volume setting (page E-6).
• Turn power off and then back on to initialize all keyboard settings
(page E-6).
• Replace the batteries with new ones or switch over to AC adaptor
power (page E-5).
Output volume does not change even though is
change my keyboard touch.
• Change the Touch Response setting (page E-8).
• Turn power off and then back on to initialize all keyboard settings
(page E-6).
In certain keyboard ranges, the volume and tone
quality sound are slightly different from those in other
keyboard ranges.
This is due to system limitations. It does not indicate malfunction.
With some tones, octaves do not change at the far
ends of the keyboard.
This is due to system limitations. It does not indicate malfunction.
The pitch of the notes does not match other
accompanying instruments or sounds strange when
played long with other instruments.
• Check and adjust the transpose (page E-13) and tuning settings
(page E-13).
• Turn power off and then back on to initialize all keyboard settings
(page E-6).
The reverb of notes seems to change suddenly.
• Check and adjust the reverb setting (page E-12).
• Turn power off and then back on to initialize all keyboard settings
(page E-6).
A loud ringing sound is produced when I connect a
microphone.
Point the microphone away and move it away from the speakers.
Sounds I sampled were deleted.
Sampled data is deleted whenever keyboard power is turned off (page
E-15).
Operation
When I perform a skip forward or skip back
operation, the skip operation moves multiple song
measures instead of only a single measure.
While song playback is stopped or a Step Up Lesson is in progress,
skip forward and skip back operations are performed in phrase units
(page E-18).
Computer Connection
I can’t exchange data between the Digital Keyboard • Check to make sure that the USB cable is connected to the
and a computer.
keyboard and computer, and that the device is selected correctly
with your computer’s music software settings (page E-34).
• Turn off the keyboard and then exit the music software on your
computer. Next, turn the keyboard back on and then restart the
music software on your computer.
E-39
Download from Www.Somanuals.com. All Manuals Search And Download.
Reference
Specifications
Model
LK-230
Keyboard
61 standard-size keys
2 types, Off
Touch Response
Key Light System
Maximum Polyphony
Tones
Up to 4 keys can be lit at the same time
48 notes (24 for certain tones)
Built-in Tones
Sampling Tones
400
1 (Full Sampling) or 3 (Short Sampling)
Sampling Time:1 second (Full Sampling) or approximately 0.3 seconds each (Short Sampling)
Effects: 10 types (for Full Sampling samples)
Reverb
1 to 10, Off
Voice Pad
5 pads × 4 sets
(3 sets for sampled sounds, 1 set for percussion only)
Metronome
Beats per Measure
Tempo Range
Song Bank
0, 2 to 6
30 to 255
Tunes
110
Step Up Lesson
Lessons
4 (Listen, Watch, Remember, Auto)
Lesson Part
L, R, LR
Functions
Repeat, Voice Fingering Guide, Note Guide, Performance Evaluation
20 notes
Music Challenge
Auto Accompaniment
Rhythm Patterns
One Touch Presets
Other Functions
Transpose
150
150
1 octaves (–12 to +12 semitones)
A4 = approx. 440 Hz 100 cents
Tuning
MIDI
16 multi-timbre received, GM Level 1 standard
Musical Information Function Tone, Rhythm, Song Bank, numbers and names; staff notation, fingering, pedal operation,
tempo, measure and beat number, chord name, etc.
Inputs/Outputs
USB port
TYPE B
Sustain jack
Standard jack (sustain, sostenuto, soft, rhythm start/stop)
Phones/Output jack
Stereo standard jack
Output Impedance: 200Ω, Output Voltage: 4.8V (RMS) MAX
Audio In jack
Mic In jack
Stereo mini jack
Input Impedance: 40kΩ, Input Sensitivity: 200mV
Standard jack
Input Impedance: 3kΩ, Input Sensitivity: 10mV
Power Jack
Power Supply
Batteries
9V DC
2-way
6 AA-size zinc-carbon batteries or alkaline batteries
Battery Life
Approximately 3 hours continuous operation on alkaline batteries
AC Adaptor
AD-5
Auto Power Off
Speakers
Approximately 6 minutes after last key operation (Operates during battery use only)
10cm × 2 (Output: 2W + 2W)
Power Consumption
9V = 7.7W
E-40
Download from Www.Somanuals.com. All Manuals Search And Download.
Reference
Dimensions
Weight
94.9 × 35.7 × 11.8 cm (37 3/8 × 14 1/16 × 4 5/8 inch)
Approximately 4.2kg (9.3 lbs) (without batteries)
• Design and specifications are subject to change without notice.
Operating Precautions
Be sure to read and observe the following operating precautions.
■ Location
Avoid the following locations for this product.
• Areas exposed to direct sunlight and high humidity
• Areas subjected to temperature extremes
• Near a radio, TV, video deck, or tuner
The above devices will not cause malfunction of the product, but interference from the product can cause audio or video
interference of a nearby device.
■ User Maintenance
• Never use benzine, alcohol, thinner, or other chemical agents to clean the product.
• To clean the product or its keyboard, wipe with a soft cloth moistened in a weak solution of water and a mild neutral detergent.
Wring all excess moisture from the cloth before wiping.
■ Included and Optional Accessories
Use only accessories that are specified for use with this product. Use of unauthorized accessories creates the risk of fire, electric
shock, and personal injury.
■ Weld Lines
Lines may be visible on the exterior of the product. These are “weld lines” that result from the plastic molding process. They are not
cracks or scratches.
■ Musical Instrument Etiquette
Always be aware of others around you whenever using this product. Be especially careful when playing late at night to keep the
volume at levels that do not disturb others. Other steps you can take when playing late at night are closing the window and using
headphones.
E-41
Download from Www.Somanuals.com. All Manuals Search And Download.
Reference
E-42
Download from Www.Somanuals.com. All Manuals Search And Download.
Download from Www.Somanuals.com. All Manuals Search And Download.
Download from Www.Somanuals.com. All Manuals Search And Download.
This recycle mark indicates that the packaging conforms to
the environmental protection legislation in Germany.
Esta marca de reciclaje indica que el empaquetado se
ajusta a la legislación de protección ambiental en Alemania.
F
MA0901-A Printed in China
LK230ES1A
Download from Www.Somanuals.com. All Manuals Search And Download.
|
Black Decker Toaster T2808 User Manual
Blanco Indoor Furnishings 157 042 User Manual
Blomberg Cooktop CTE 30400 User Manual
Brookstone Video Game Keyboard 796246p User Manual
Brother All in One Printer 2850 User Manual
Brother Typewriter CM 2000 User Manual
Cabletron Systems Switch 5500 User Manual
Cannondale Bicycle SCALPEL 100 User Manual
Casio Computer Hardware DT X5 User Manual
Casio Digital Camera QV 2000UX Ir User Manual