ES
USER’S GUIDE
GUÍA DEL USUARIO
CTK591/593-ES-1
CTK591_es_Cover.p65
1
03.10.7, 4:27 PM
Download from Www.Somanuals.com. All Manuals Search And Download.
Safety Precautions
Congratulations on your selection of the CASIO
electronic musical instrument.
Symbol Examples
• Before using the instrument, be sure to carefully
read through the instructions contained in this
manual.
This triangle symbol ( ) means that the
user should be careful. (The example at
left indicates electrical shock caution.)
• Please keep all information for future reference.
This circle with a line through it (
)
means that the indicated action must not
be performed. Indications within or
nearby this symbol are specifically
prohibited. (The example at left indicates
that disassembly is prohibited.)
Symbols
Various symbols are used in this user’s guide and on
the product itself to ensure that the product is used
safely and correctly, and to prevent injury to the user
and other persons as well as damage to property.
Those symbols along with their meanings are shown
below.
The black dot ( ) means that the
indicated action must be performed.
Indications within this symbol are actions
that are specifically instructed to be
performed. (The example at left indicates
that the power plug must be unplugged
from the electrical socket.)
DANGER
This symbol indicates information that, if ignored
or applied incorrectly, creates the danger of death
or serious personal injury.
WARNING
This indication stipulates matters that have the risk
of causing death or serious injury if the product is
operated incorrectly while ignoring this indication.
CAUTION
This indication stipulates matters that have the risk
of causing injury as well as matters for which there
is the likelihood of occurrence of physical damage
only if the product is operated incorrectly while
ignoring this indication.
704A-E-003A
E-1
CTK591_e_01-07.p65
1
03.10.7, 4:27 PM
Download from Www.Somanuals.com. All Manuals Search And Download.
Safety Precautions
AC Adaptor
DANGER
Never touch the AC adaptor while your
hands are wet.
Alkaline Batteries
Doing so creates the risk of electric shock.
Perform the following steps immediately if
fluid leaking from alkaline batteries ever
gets into your eyes.
1. Do not rub your eyes! Rinse them with
water.
2. Contact your physician immediately.
Leaving alkaline battery fluid in your eyes
can lead to loss of sight.
Batteries
Misuse of batteries can cause them to leak,
resulting in damage to nearby objects, or to
explode, creating the risk of fire and
personal injury. Always make sure you
observe the following precautions.
• Never try to take batteries apart or allow
them to become shorted.
• Never expose batteries to heat or dispose
of them by incineration.
• Never mix old batteries with new ones.
• Never mix batteries of different types.
• Do not charge the batteries.
• Make sure the positive (+) and negative
(–) ends of the batteries are facing
correctly.
WARNING
Smoke, Strange Odor, Overheating
Continued use of the product while it is
emitting smoke, a strange odor, or heat
creates the risk of fire and electric shock.
Take the following steps immediately.
1. Turn off power.
2. If you are using the AC adaptor for
power, unplug it from the wall outlet.
3. Contact your original retailer or an
authorized CASIO Service Provider.
Do not incinerate the product.
Never throw the product into fire.
Doing so can cause it to explode, creating
the risk of fire and personal injury.
Water and Foreign Matter
AC Adaptor
Water, other liquids, and foreign matter
(such as pieces of metal) getting into the
product create the risk of fire and electric
shock. Take the following steps
immediately.
Misuse of the AC adaptor creates the risk
of fire and electric shock. Always make sure
you observe the following precautions.
• Be sure to use only the AC adaptor that
is specified for this product.
1. Turn off power.
• Use only a power source whose voltage
is within the rating marked on the AC
adaptor.
• Do not overload electrical outlets and
extension cords.
2. If you are using the AC adaptor for
power, unplug it from the wall outlet.
3. Contact your original retailer or an
authorized CASIO Service Provider.
Disassembly and Modification
AC Adaptor
Never try to take this product apart or
modify it in any way. Doing so creates the
risk of electric shock, burn injury, or other
personal injury. Leave all internal
inspection, adjustment, and maintenance up
to your original retailer or authorized
CASIO Service Provider.
Misuse of the AC adaptor’s electric cord
can damage or break it, creating the risk of
fire and electric shock. Always make sure
you observe the following precautions.
• Never place heavy objects on the cord or
subject it to heat.
• Never try to modify the cord or subject it
to excessive bending.
• Never twist or stretch the cord.
• Should the electric cord or plug become
damaged, contact your original retailer
or authorized CASIO Service Provider.
Dropping and Impact
Continued use of this product after it has
been damaged by dropping or subjecting it
to strong impact creates the risk of fire and
electric shock. Take the following steps
immediately.
1. Turn off power.
2. If you are using the AC adaptor for
power, unplug it from the wall outlet.
3. Contact your original retailer or an
authorized CASIO Service Provider.
E-2
704A-E-004A
CTK591_e_01-07.p65
2
03.10.7, 4:27 PM
Download from Www.Somanuals.com. All Manuals Search And Download.
Safety Precautions
Plastic Bags
CAUTION
Never place the plastic bag the product
comes in over your head or in your mouth.
Doing so creates the risk of suffocation.
Particular care concerning this precaution
is required where small children are
present.
AC Adaptor
Misuse of the AC adaptor creates the risk
of fire and electric shock. Always make sure
you observe the following precautions.
• Do not locate the electric cord near a
stove or other sources of heat.
• Never pull on the cord when unplugging
from the electrical outlet. Always grasp
the AC adaptor when unplugging.
Keep off of the product and stand.*
Climbing onto the product or stand can
cause it to tip over or become damaged.
Particular care concerning this precaution
is required where small children are
present.
AC Adaptor
Misuse of the AC adaptor creates the risk
of fire and electric shock. Always make sure
you observe the following precautions.
• Insert the AC adaptor into the wall outlet
as far as it will go.
• Unplug the AC adaptor from the wall
outlet during lightening storms or before
leaving on a trip or other long-term
absence.
Location
Avoid locating the product on an unstable
stand, on an uneven surface, or any other
unstable location. An unstable location can
cause the product to fall over, creating the
risk of personal injury.
• At least once a year, unplug the AC
adaptor from the wall outlet and wipe
away any dust that is built up in the area
around the prongs of the plug.
Relocating the Product
Before relocating the product, always
unplug the AC adaptor from the wall outlet
and disconnect all other cables and
connecting cords. Leaving cords connected
creates the risk of damage to the cords, fire,
and electric shock.
Cleaning
Before cleaning the product, always unplug
the AC adaptor from the wall outlet first.
Leaving the AC adaptor plugged in creates
the risk of damage to the AC adaptor, fire,
and electric shock.
Batteries
Misuse of batteries can cause them to leak
resulting in damage to nearby objects, or to
explode, creating the risk of fire and
personal injury. Always make sure you
observe the following precautions.
• Use only batteries that are specified for
use with this product.
• Remove batteries from the product if you
do not plan to use it for a long time.
Connectors
Connect only the specified devices and
equipment to the product’s connectors.
Connection of a non-specified device or
equipment creates the risk of fire and
electric shock.
704A-E-005A
E-3
CTK591_e_01-07.p65
3
03.10.7, 4:27 PM
Download from Www.Somanuals.com. All Manuals Search And Download.
Safety Precautions
Location
IMPORTANT!
Avoid the following locations for this
product. Such locations create the risk of
fire and electric shock.
When using batteries, be sure to replace them or shift to
one of the alternate power sources whenever you notice
any of the following symptoms.
• Areas subject to high humidity or large
amounts of dust.
• In food preparation areas or other areas
subject to oil smoke.
• Near air conditioning equipment, on a
heated carpet, in areas exposed to direct
sunlight, inside of a vehicle parked in
the sun, or any other area that subjects
the product to high temperatures.
• Dim power supply indicator
• Instrument does not turn on.
• Dim, difficult to read display
• Abnormally low speaker/headphone volume
• Distortion of sound output
• Occasional interruption of sound when playing at high
volumes
• Sudden power failure when playing at high volumes
• Dimming of the display when playing at high volume
• Continued sound output even after you release a key
• A totally different tone may sound
• Abnormal rhythm pattern and demo tune play
• Abnormally low microphone volume
• Distortion of microphone input
Display Screen
• Never push on the display screen’s LCD
panel or subject it to strong impact. Doing
so can cause the LCD panel’s glass to
crack, creating the risk of personal injury.
• Should the LCD panel ever crack or
break, never touch the liquid inside of
the panel. LCD panel liquid can cause
skin irritation.
• Dim power supply indicator when a microphone is used
• Sudden power failure when using the microphone
• Loss of power, sound distortion, or low volume when
playing from a connected computer or MIDI device
• Should LCD panel liquid ever get inside
your mouth, immediately wash out your
mouth with water and contact your
physician.
• Should LCD panel liquid ever get into
your eyes or onto your skin, rinse with
clear water for at least 15 minutes, and
then contact a physician.
Sound Volume
Do not listen to music at very loud volumes
for long periods. Particular care concerning
this precaution is required when using
headphones. High volume settings can
damage your hearing.
Heavy Objects
Never place heavy object on top of the
product.
Doing so can make the product top heavy,
causing the product to tip over or the object
to fall from it, creating the risk of personal
injury.
Correct Stand* Assembly
An incorrectly assembled stand can tip over,
causing the product to fall and creating the
risk of personal injury.
Make sure you assemble the stand correctly,
following the assembly instructions that
come with it. Make sure you mount the
product on the stand correctly.
* Stand is available as an option.
E-4
704A-E-006A
CTK591_e_01-07.p65
4
03.10.7, 4:27 PM
Download from Www.Somanuals.com. All Manuals Search And Download.
Main Features
❐ 255 tones
A wide selection of tones includes stereo piano and synthesized sounds, drum sets, and much more.
❐ PIANO BANK button
The touch of a button takes you directly to piano tones and piano lessons.
❐ Advanced 3-Step Lesson System
The 3-Step Lesson System lets you practice at your own pace. The keyboard automatically grades your performances, so you can
trace your progress as you improve.
• 3-Step Lesson System: Now you can learn the parts that make up the keyboard’s built-in tunes step-by-step. Guidance that
appears on the monitor screen helps lead you down the path to music proficiency.
• Evaluation System: The keyboard can be configured to rate your performances during Step 1 and Step 2 lessons by assigning
points. You can even have the keyboard report your points vocally, both part way through and at the end of a lesson.
❐ Sing-along
Simply connect a commercially available microphone to the microphone jack and you can sing along with the keyboard’s built-in
tunes.
❐ 100 built-in tunes, including piano pieces
Built-in tunes are divided into two groups: a Song Bank of 50 tunes with Auto Accompaniment, and a Piano Bank of 50 piano
tunes. You can simply enjoy listening to the built-in tunes, or eliminate the melody part of a Song Bank tunes or either hand part
of a Piano Bank tune, and then play along on the keyboard.
❐ 120 rhythms
A selection of rhythms cover rock, pops, jazz and just about any other musical style imaginable.
❐ Auto Accompaniment
Simply play a chord and the corresponding rhythm, bass, and chord parts play along automatically. One Touch Presets instantly
recalls the most suitable tone and tempo settings to match the rhythm you are using.
❐ Musical Information System
A big LCD screen graphically shows you fingerings, keyboard keys to be pressed, and notes, making keyboard play more
informative and enjoyable than ever before. A built-in backlight keeps the display easy to read, even in total darkness.
❐ Song Memory function
• Record up to two parts in song memory for later playback. Realistic ensemble play can also be created using the Auto
Accompaniment function.
• The on-screen keyboard guide shows fingerings for the melody as recorded songs are played back.
❐ General MIDI compatibility
General MIDI tones let you connect to a personal computer and enjoy “desktop music” capabilities. This keyboard can be used as
a desktop music input device or as a sound source, and it’s just the thing for playback of commercially available pre-recorded
General MIDI music software.
❐ Display Indications for Received MIDI Messages
When playing General MIDI data, you can have information (keyboard and pedal data) about a specific channel appear on the
display. You can also turn off a specific channel and play its part on the keyboard. You can even turn off the output of a channel
and play along on the keyboard.
704A-E-007A
E-5
CTK591_e_01-07.p65
5
03.10.7, 4:27 PM
Download from Www.Somanuals.com. All Manuals Search And Download.
Contents
Safety Precautions ................ E-1
Main Features ........................ E-5
Contents................................. E-6
Practicing on the Piano ...... E-21
Using the PIANO BANK Button ............. E-21
Playing a Built-in Tune........ E-22
To play back a Song Bank tune ............. E-22
To play back a Piano Bank tune............. E-23
Musical Information System ................... E-23
Adjusting the Tempo............................... E-23
To pause playback ................................. E-24
To fast reverse ....................................... E-24
To fast forward ....................................... E-24
To change the melody tone .................... E-25
To play all tunes in succession............... E-25
General Guide........................ E-8
About the display ................................... E-11
Quick Reference.................. E-12
To play the keyboard .............................. E-12
Power Supply ...................... E-14
Using batteries ....................................... E-14
Using the AC Adaptor............................. E-15
Auto Power Off....................................... E-15
Settings and Memory Contents.............. E-16
Advanced 3-Step Lesson ... E-26
Evaluation Mode .................................... E-27
Using the Lesson Functions and
Evaluation Mode .................................... E-27
Connections ........................ E-17
Step 1 – Master the timing. .................... E-28
Step 2 – Master the notes. ..................... E-29
Step 3 – Play at normal speed. .............. E-30
Using the Phrase Practice Mode ........... E-30
Voice Fingering Guide............................ E-31
Using the Metronome............................. E-31
Phones/Output Terminal......................... E-17
Connecting to a Computer or Other
Equipment .............................................. E-17
Assignable jack Terminal........................ E-17
Microphone Jack .................................... E-18
Accessories and Options ....................... E-18
Using a Microphone for
Basic Operations................. E-19
Sing Along ........................... E-32
To play the keyboard .............................. E-19
Selecting a Tone..................................... E-19
E-6
704A-E-008A
CTK591_e_01-07.p65
6
03.10.7, 4:27 PM
Download from Www.Somanuals.com. All Manuals Search And Download.
Contents
Adjusting the Accompaniment Volume... E-49
Tuning the Keyboard .............................. E-50
Auto Accompaniment ......... E-34
Selecting a Rhythm ................................ E-34
Playing a Rhythm ................................... E-35
Adjusting the Tempo............................... E-35
Using Auto Accompaniment ................... E-35
Using an Intro Pattern ............................ E-38
Using a Fill-in Pattern............................. E-39
Using a Rhythm Variation....................... E-39
MIDI....................................... E-51
What is MIDI? ........................................ E-51
General MIDI.......................................... E-52
Changing MIDI Settings ......................... E-52
Messages............................................... E-56
Using a Fill-in Pattern with
Troubleshooting .................. E-59
Specifications...................... E-61
Care of your keyboard ........ E-63
Appendix ................................ A-1
a Variation Rhythm................................. E-39
Synchro Starting Accompaniment with
Rhythm Play........................................... E-39
Finishing with an Ending Pattern ........... E-40
Using One-touch Preset......................... E-40
Song Memory Function ...... E-41
Note Table ................................................ A-1
Drum Assignment List .............................. A-3
FINGERED Chord Chart .......................... A-5
Tone List................................................... A-6
Rhythm List .............................................. A-9
Song List ................................................ A-10
Tracks .................................................... E-41
Real-time Recording to Track 1 ............. E-42
Playing Back from Song Memory........... E-44
Real-time Recording to Track 2 ............. E-44
Deleting the Contents of
a Specific Track...................................... E-45
MIDI Implementation Chart
Keyboard Settings .............. E-46
Using Layer ............................................ E-46
Using Split .............................................. E-46
Using Layer and Split Together .............. E-47
Transposing the Keyboard ..................... E-48
Using Touch Response .......................... E-48
704A-E-009A
E-7
CTK591_e_01-07.p65
7
03.10.7, 4:27 PM
Download from Www.Somanuals.com. All Manuals Search And Download.
General Guide
N
P
S
T
X Y
V
W
Z [
b
c
O
Q
R
U
\ ]
a
^
E
F
G
H
I
1
J
2
E
*
*
K
L
M
1
2
3
4
5
6
7
8
9
0
B
C
A
D
E-8
704A-E-010A
CTK591_e_08-21.p65
8
03.10.7, 4:27 PM
Download from Www.Somanuals.com. All Manuals Search And Download.
General Guide
NOTE
• Key, button, and other names are indicated in the text of this manual using bold type.
• This keyboard has two PLAY/STOP buttons. In this manual, the PLAY/STOP button that is located under the SING ALONG
button is indicated as <PLAY/STOP>.
1
N
O
P
Q
R
S
T
U
V
W
POWER button
Power indicator
VOLUME slider
MODE switch
MIC jack
2
3
4
MIC VOLUME knob
SING ALONG button
KEY CONTROL/TRANSPOSE buttons
<PLAY/STOP> button
SETTING button
G SONG/PIANO BANK/RHYTHM CONTROLLER
5
INTRO button
SONG MEMORY button
ONE TOUCH PRESET button
RHYTHM button
6
REW button, NORMAL/FILL-IN button
7
FF button, VARIATION/FILL-IN button
8
PAUSE button, SYNCHRO/ENDING button
TONE button
9
PLAY/STOP button, START/STOP button
0
Song/Piano Bank controller indicator
G ADVANCED 3-STEP LESSON SYSTEM
A
X
Rhythm controller indicator
SPEAK button
Y
METRONOME button
B
SONG BANK button
Z
LEFT button, TRACK 1 button
C
PIANO BANK button
[
RIGHT button, TRACK 2 button
D
TEMPO buttons
\
SCORING 1 button
E
Speaker
]
PRACTICE PHRASE button
F
RHYTHM list
_
SCORING 2 button
G
TONE list
a
STEP 1 to 3 button
H
SONG BANK/SING ALONG list
I
b
Display
SPLIT button
J
c
PIANO BANK list
LAYER button
K
CHORD root names
L
Percussion instrument list
M
Voice 1 to 5
*1 Attaching the Score Stand
Insert the score stand into the slot at the top
of the keyboard as shown in the illustration.
704A-E-011A
E-9
CTK591_e_08-21.p65
9
03.10.7, 4:27 PM
Download from Www.Somanuals.com. All Manuals Search And Download.
General Guide
*2
d
Number buttons
• For input of numbers to
change a displayed number
or setting.
• Negative values cannot be
input using the number
buttons. Use [+] (increase)
and [–] (decrease) instead.
e
[+] [–]
/
buttons
Rear Panel
f
g
f
g
h
i
j
MIDI OUT terminal
MIDI IN terminal
ASSIGNABLE JACK terminal
DC 9V jack
PHONES/OUTPUT terminal
h
i
j
Controller Indicators
Song/Piano Bank controller indicator
Pressing the SONG BANK, PIANO BANK, or SING ALONG button, or pressing the SONG BANK and PIANO BANK buttons at
5
the same time to start demo tune play causes the Song/Piano Bank controller indicator to light. This indicates that buttons
9
through
are currently functioning as playback control buttons.
Rhythm controller indicator
Pressing the RHYTHM button to enter the Rhythm Mode, or pressing the RHYTHM button and then the SONG MEMORY button
5
9
to enter the Song Memory mode causes the Rhythm controller indicator to light. This indicates that buttons
currently functioning as rhythm control buttons.
through
are
E-10
704A-E-012A
CTK591_e_08-21.p65
10
03.10.7, 4:27 PM
Download from Www.Somanuals.com. All Manuals Search And Download.
General Guide
About the display
2
9
1
10
8 7
3
6
5
4
1. The icons that appear here indicate whether the keyboard is in the Sing Along Mode, Song Bank Mode, or Piano Bank Mode.
2. Numeric Area: This area displays tone numbers, song numbers, evaluation values, and other numeric data.
Text Area:
This area displays tone names and song names. It is also used as the display area for the Evaluation Mode,
Song Memory, and other functions.
Indicator Area: This area indicates the type of data that is currently displayed in the numeric area and text area.
Example: The indicator points to “SONG BANK” when a Song Bank tune name is displayed.
3. This area is a staff notation display that shows notes being played in built-in tunes, on the keyboard, or from memory, chord
ꢀ
forms, and MIDI receive data.*1 Notes in the range F 6 to C7 are shown in the staff notation display one octave lower, along
with an octave up mark (
).*2
If you are using a pedal, a pedal mark ( ) appears here whenever you press the pedal.
*1 Received notes outside the range of C2 to C7 do not appear on the display.
*2 Notes in the range of C2 through B2 are not shown while the octave up mark (
) is on the display.
4. An indicator appears next to a function that is in use: touch response, General MIDI Mode, song memory, layer, split.
5. This area shows fingerings and other finger information during 3-step lesson and tune play. The letters “L” (left) and “R” (right)
appear to indicate left and right hand Auto Accompaniment parts and song memory tracks.
6. This area shows the current measure number and beat number, a graphic metronome, and the current tempo setting (beats
per minute) during rhythm, Auto Accompaniment, built-in tune, song memory play, and metronome.
7. This area shows chord names during Auto Accompaniment, Song Bank, and Sing Along play.
8. This area uses a graphic keyboard to show notes being played in built-in tunes, on the keyboard, or from song memory, chord
forms, and MIDI receive data.
9. The type of star that appears here indicates the accuracy of your timing for each note you play, when the Evaluation Mode is
turned on.
10. This area displays indicators that show when 3-Step Lesson, the Evaluation Mode, or Voice Fingering is turned on.
NOTE
• Display examples shown in this User’s Guide are intended for illustrative purposes only. The actual text and values that
appear on the display may differ from the examples shown in this User’s Guide.
• Viewing a liquid crystal display screen from an angle can change the appearance of display contrast. The display contrast of
this keyboard is set to allow easy viewing for a person seated on a chair in front of the keyboard. Note that display contrast
is fixed, and cannot be adjusted.
704A-E-013A
E-11
CTK591_e_08-21.p65
11
03.10.7, 4:27 PM
Download from Www.Somanuals.com. All Manuals Search And Download.
Quick Reference
SONG BANK
PIANO BANK
Number buttons
Power indicator
POWER
STEP 2
STEP 1
MODE
PLAY/STOP
This section provides a quick overview of keyboard operation
using steps one and two of the 3-step lesson feature.
With the 3-step lesson feature, the on-screen keyboard guide
keys light to show the next note of the tune.
4 Find the tune you want to play in the SONG BANK/
SING ALONG List, and then use the number
buttons to input its two-digit number.
• See page A-10 for the Song Bank/Sing Along List.
Example: To select “42 ALOHA OE”, input 4 and then
2.
To play the keyboard
1 Press the POWER button to turn on power.
• This causes the power indicator to light.
Lit
5 Press the STEP 1 button or STEP 2 button.
• The keyboard sounds a count beat and waits for you
to play something on the keyboard. The keys that you
need to press first flash on the display.
6 Play the melody along with the selected tune’s
2 Set the MODE switch to NORMAL.
accompaniment.
• Play in accordance with the keyboard keys, fingerings
and notes that appear on the display.
A l o h a O e
3 Press the SONG BANK button.
• This causes the SONG BANK button to light.
Keyboard key used
Fingering
Note pitch
Indicators
appear
E-12
704A-E-014A
CTK591_e_08-21.p65
12
03.10.7, 4:27 PM
Download from Www.Somanuals.com. All Manuals Search And Download.
Quick Reference
If you selected lesson Step 1
• Play the notes on the keyboard.
• Accompaniment (left-hand part) plays in time with
the notes.
• With Step 1, the correct melody note is played no
matter which keyboard key you press.
If you selected lesson Step 2
• Play the correct notes on the keyboard.
• While an on-screen keyboard guide key is lit, press
the corresponding key on the actual keyboard. In the
case of a Piano Bank tune, the keyboard guide
indication turns off when you press a keyboard key,
and the on-screen keyboard guide key lights for the
next note to be played.
• Accompaniment (left-hand part) plays in time with
the notes, as long as you press the correct keyboard
keys.
7 To stop play at any time, press the PLAY/STOP
button.
To play an Etude or Concert Piece tune
1 When you get to step 3 of the above procedure,
press the PIANO BANK button in place of the
SONG BANK button.
• This causes the PIANO BANK button to light.
Indicators
appear
2 Find the tune you want to play in the PIANO BANK
List, and then use the number buttons to input its
two-digit number.
• See page A-11 for the Piano Bank List.
3 Next, continue from step 5 of the above procedure.
704A-E-015A
E-13
CTK591_e_08-21.p65
13
03.10.7, 4:27 PM
Download from Www.Somanuals.com. All Manuals Search And Download.
Power Supply
This keyboard can be powered by current from a standard
household wall outlet (using the specified AC adaptor) or by
batteries. Always make sure you turn the keyboard off
whenever you are not using it.
Important Battery Information
I
The following shows the approximate battery life.
Manganese batteries ............................... 6 hours
The above value is standard battery life at normal
temperature, with the keyboard volume at medium
setting. Temperature extremes or playing at very loud
volume settings can shorten battery life.
Using batteries
Always make sure you turn off the keyboard before loading
or replacing batteries.
I
Any of the following symptoms indicate low battery power.
Replace batteries as soon as possible whenever any of
the following occurs.
To load batteries
• Dim power supply indicator
• Instrument does not turn on
1 Remove the battery compartment cover.
• Dim, difficult to read display
• Abnormally low speaker/headphone volume
• Distortion of sound output
• Occasional interruption of sound when playing at high
volumes
• Sudden power failure when playing at high volumes
• Dimming of the display when playing at high volume
• Continued sound output even after you release a key
• A totally different tone may sound
• Abnormal rhythm pattern and demo tune play
• Abnormally low microphone volume
• Distortion of microphone input
2 Load 6 D-size batteries into the battery
compartment.
• Make sure that the positive (+) and negative (–) ends
are facing correctly.
• Dim power supply indicator when a microphone is used
• Sudden power failure when using the microphone
• Loss of power, sound distortion, or low volume when
playing from a connected computer or MIDI device
3 Insert the tabs on the battery compartment cover
into the holes provided and close the cover.
WARNING
Misuse of batteries can cause them to leak, resulting in
damage to nearby objects, or to explode, creating the risk of
fire and personal injury. Always make sure you observe the
following precautions.
• Never try to take batteries apart or allow them to
become shorted.
NOTE
• The keyboard may not function correctly if you load or
replace batteries with power turned on. If this happens,
turning the keyboard off and then back on again should
return functions back to normal.
• Never expose batteries to heat or dispose of them by
incineration.
• Never mix old batteries with new ones.
• Never mix batteries of different types.
• Do not charge the batteries.
• Make sure the positive (+) and negative (–) ends of
the batteries are facing correctly.
CAUTION
Misuse of batteries can cause them to leak resulting in
damage to nearby objects, or to explode, creating the risk of
fire and personal injury. Always make sure you observe the
following precautions.
• Use only batteries that are specified for use with this
product.
• Remove batteries from the product if you do not plan
to use it for a long time.
E-14
704A-E-016A
CTK591_e_08-21.p65
14
03.10.7, 4:27 PM
Download from Www.Somanuals.com. All Manuals Search And Download.
Power Supply
CAUTION
Using the AC Adaptor
Misuse of the AC adaptor creates the risk of fire and electric
shock. Always make sure you observe the following
precautions.
Make sure that you use only the AC adaptor specified for
this keyboard.
• Do not locate the electric cord near a stove or other
sources of heat.
Specified AC Adaptor: AD-5
• Never pull on the cord when unplugging from the
electrical outlet. Always grasp the AC adaptor when
unplugging.
[Rear Panel]
DC 9V jack
• Insert the AC adaptor into the wall outlet as far as it
will go.
• Unplug the AC adaptor from the wall outlet during
lightening storms or before leaving on a trip or other
long-term absence.
AC adapter AD-5
• At least once a year, unplug the AC adaptor from the
wall outlet and wipe away any dust that is built up in
the area around the prongs of the plug.
AC outlet
IMPORTANT!
• Make sure that the keyboard is turned off before
connecting or disconnecting the AC adaptor.
• Using the AC adaptor for a long time can cause it to
become warm to the touch. This is normal and does not
indicate malfunction.
Also note the following important warnings and precautions
when using the AC adaptor.
WARNING
Misuse of the AC adaptor creates the risk of fire and electric
shock. Always make sure you observe the following
precautions.
• Be sure to use only the AC adaptor that is specified
for this product.
• Use only a power source whose voltage is within the
rating marked on the AC adaptor.
• Do not overload electrical outlets and extension cords.
Auto Power Off
When you are using battery power, keyboard power turns
off automatically whenever you leave it on without
performing any operation for about 6 minutes. When this
happens, press the POWER button to turn power back on.
• Never place heavy objects on the cord or subject it to
heat.
• Never try to modify the cord or subject it to excessive
bending.
NOTE
• Auto Power Off is disabled (it does not function) when
you are using the AC adaptor to power the keyboard.
• Never twist or stretch the cord.
• Should the electric cord or plug become damaged,
contact your original retailer or authorized CASIO
Service Provider.
• Never touch the AC adaptor while your hands are wet.
Doing so creates the risk of electric shock.
To disable Auto Power Off
Hold down the TONE button while turning on the keyboard
to disable Auto Power Off.
NOTE
• When this function is turned off, the keyboard does not
turn off automatically no matter how long it is left with
no operation being performed.
• Auto Power Off is enabled again when you manually
turn off power and then turn it back on again.
704A-E-017A
E-15
CTK591_e_08-21.p65
15
03.10.7, 4:27 PM
Download from Www.Somanuals.com. All Manuals Search And Download.
Power Supply
Settings and Memory Contents
Settings
Tone, rhythm, and other “main keyboard settings” in effect
when power is turned off manually with the POWER button
or automatically by Auto Power Off remain in effect when
you next turn power back on.
Main Keyboard Settings
Main keyboard settings are: layer, split, split point,
touch response, rhythm number, rhythm tempo,
accompaniment volume, layered tone, split tone,
layered split tone, General MIDI mode on/off, accomp
MIDI OUT on/off, Assignable jack setting, keyboard
channel, and voice fingering guide on/off.
Song Memory Contents
In addition to the above settings, data stored using the song
memory function is also retained.
Electrical Power
The settings and memory data described above are retained
as long as the keyboard is being supplied with electrical
power. Unplugging the AC adaptor when batteries are not
loaded or when loaded batteries are dead cuts off the
keyboard’s electrical power supply. This causes all settings
to be initialized to their factory defaults and clears all data
stored in memory.
Power Requirements
Note the following precautions whenever you want to ensure
that current keyboard settings and memory contents are not
lost.
• Make sure the keyboard is being supplied power through
the AC adaptor before replacing its batteries.
• Before unplugging the AC adaptor, make sure that fresh
batteries are loaded in the keyboard.
Make sure that keyboard power is turned off before replacing
batteries or unplugging the AC adaptor.
E-16
704A-E-018A
CTK591_e_08-21.p65
16
03.10.7, 4:27 PM
Download from Www.Somanuals.com. All Manuals Search And Download.
Connections
Connection Example
Phones/Output Terminal
PIN plug (red)
PIN jack
PREPARATION
To keyboard’s
PHONES/OUTPUT
terminal
INPUT 1
INPUT 2
• Before connecting headphones or other external
equipment, be sure to first turn down the volume settings
of the keyboard and the connected equipment. You can
then adjust volume to the desired level after connections
are complete.
PIN plug (white)
Keyboard or
guitar amp
Stereo standard plug
Standard plug
[Rear Panel]
Connecting to a Computer or
Other Equipment
PHONES/OUTPUT terminal
You can also connect the keyboard to a computer or sequencer.
Audio connection
See “MIDI” on page E-51 for details.
1
Assignable jack Terminal
You can connect an optional sustain pedal (SP-2 or SP-20) to
the ASSIGNABLE JACK terminal to enable the capabilities
described below.
Stereo standard
plug
3
Keyboard amp,
White
Red
PIN plug
guitar amp, etc.
2
LEFT RIGHT
For details on how to select the pedal function you want, see
“ASSIGNABLE JACK (Default: SUS)” on page E-55.
AUX IN or similar terminal
of audio amplifier
ASSIGNABLE JACK Terminal
1
Connecting Headphones (Figure
)
Connecting headphones cuts off output from the keyboard’s
built-in speakers, so you can play even late at night without
disturbing anyone.
2
Audio Equipment (Figure
)
Connect the keyboard to a audio equipment using a
commercially available connecting cord with a standard plug
on one end and two PIN plugs on the other end. Note that
the standard plug you connect to the keyboard must be a
stereo plug, otherwise you will be able to output only one of
stereo channels. In this configuration, you normally set the
input selector of the audio equipment to the terminal (usually
marked AUX IN or something similar) where the cord from
the keyboard is connected. See the user documentation that
comes with your audio equipment for full details.
SP-20
Sustain Pedal
• With piano tones, depressing the pedal causes notes to
linger, much like a piano’s damper pedal.
• With organ tones, depressing the pedal causes notes to
continue to sound until the pedal is released.
3
Musical Instrument Amplifier (Figure
)
Sostenuto Pedal
Use a commercially available connecting cord to connect the
keyboard to a musical instrument amplifier.
• As with the sustain pedal function described above,
depressing the sostenuto pedal causes notes to be sustained.
• This difference between a sostenuto pedal and sustain pedal
is the timing. With a sostenuto pedal, you press the keys
and then depress the pedal before you release the keys.
• Only the notes that are sounding when the pedal is
depressed are sustained.
NOTE
• Be sure to use a connecting cord that has a stereo
standard plug on the end you connect to the keyboard,
and a connector that provides dual channel (left and
right) input to the amplifier to which you are connecting.
The wrong type of connector at either end can cause
one of the stereo channels to be lost.
Soft Pedal
Depressing the pedal softens the sound of the notes being
played.
When connected to a musical instrument amplifier, set the
volume of the keyboard to a relatively low level and make
output volume adjustments using the amplifier’s controls.
Rhythm Start/Stop Pedal
In this case, the pedal performs the same functions as the
START/STOP button.
704A-E-019A
E-17
CTK591_e_08-21.p65
17
03.10.7, 4:27 PM
Download from Www.Somanuals.com. All Manuals Search And Download.
Connections
Microphone Jack
You can connect a commercially available microphone to the
microphone jack and sing along with notes played on the
keyboard. For details, see “Using a Microphone for Sing
Along” on page E-32.
Accessories and Options
Use only the accessories and options specified for this
keyboard. Use of non-authorized items creates the danger of
fire, electrical shock, and personal injury.
E-18
704A-E-020A
CTK591_e_08-21.p65
18
03.10.7, 4:27 PM
Download from Www.Somanuals.com. All Manuals Search And Download.
Basic Operations
SING ALONG
PIANO BANK
SONG BANK
TONE
Number buttons
[+] / [–]
POWER
VOLUME
MODE
This section provides information on performing basic
keyboard operations.
2 Press the TONE button.
To play the keyboard
1 Press the POWER button to turn the keyboard on.
2 Set the MODE switch to NORMAL.
Indicator appears
• If you were in the Song Bank Mode when you pressed
the TONE button, this will cause the SONG BANK
button to flash. If you were in the Piano Bank Mode,
the PIANO BANK button will flash. If you were in
the Sing Along Mode, the SING ALONG button will
flash.
3 Use the VOLUME slider to set the volume to a
relatively low level.
4 Play something on the keyboard.
• The keyboard’s initial power on default setting is Song
Bank Mode. The tone that is initially assigned to the
keyboard is 096 FLUTE 1, which is the tone used by
Song Bank tune number 00.
3 Use the number buttons to input the three-digit tone
number of the tone you want to select.
Example: To select “049 ACOUSTIC BASS”, input 0, 4
and then 9.
Selecting a Tone
This keyboard comes with 255 built-in tones. Use the
following procedure to select the tone you want.
A c o . B a s s
• Press the flashing button (SONG BANK, PIANO
BANK or SING ALONG) to exit the tone select
operation and stop the flashing.
To select a tone
1 Find the tone you want to use in the TONE List and
NOTE
note its tone number.
• Always input all three digits for the tone number,
including leading zeros (if any). If you input one or two
digits and stop, the display will automatically clear your
input after a few seconds.
• Not all of the available tones are shown on the tone
list printed on the keyboard console. For a complete
list, see the “Tone List” on page A-6.
• You can also increment the displayed tone number by
pressing [+] and decrement it by pressing [–].
• When one of the drum sets is selected (tone numbers
246 through 254), each keyboard key is assigned a
different percussion sound. See page A-3 for details.
704A-E-021A
E-19
CTK591_e_08-21.p65
19
03.10.7, 4:27 PM
Download from Www.Somanuals.com. All Manuals Search And Download.
Basic Operations
Polyphony
The term polyphony refers to the maximum number of notes
you can play at the same time. The keyboard has 24-note
polyphony, which includes the notes you play as well as the
rhythms and auto-accompaniment patterns that are played
by the keyboard. This means that when a rhythm or auto-
accompaniment pattern is being played by the keyboard, the
number of notes (polyphony) available for keyboard play is
reduced. Also note that some of the tones offer only 12-note
polyphony.
• When rhythm or auto accompaniment is playing, the
number of sounds simultaneously played is reduced.
Digital Sampling
A number of the tones that are available with this keyboard
have been recorded and processed using a technique called
digital sampling. To ensure a high level of tonal quality,
samples are taken in the low, mid, and high ranges and then
combined to provide you with sounds that are amazingly
close to the originals. You may notice very slight differences
in volume or sound quality for some tones when you play
them at different positions on the keyboard. This is an
unavoidable result of multiple sampling, and it is not a sign
of malfunction.
E-20
704A-E-022A
CTK591_e_08-21.p65
20
03.10.7, 4:27 PM
Download from Www.Somanuals.com. All Manuals Search And Download.
Practicing on the Piano
PIANO BANK
PLAY/STOP
Using the PIANO BANK Button
Pressing the PIANO BANK button provides instant access to
piano tones and piano tune selection.
Initial Piano Bank Setting
Tone: 000 Stereo Piano
To use the piano bank
1 Press the PIANO BANK button.
• This causes the PIANO BANK button to light.
Indicators
appear
2 Now try playing something on the keyboard.
• The notes you play sound with a piano tone.
3 If you want to playback the built-in tune, press the
PLAY/STOP button.
• This causes the currently selected tune to play in an
endless loop.
• To stop playback, press the PLAY/STOP button again.
704A-E-023A
E-21
CTK591_e_08-21.p65
21
03.10.7, 4:27 PM
Download from Www.Somanuals.com. All Manuals Search And Download.
Playing a Built-in Tune
SONG BANK
PIANO BANK
Number buttons
[+] / [–]
TEMPO
PLAY/STOP
Your keyboard comes with a total of built-in 100 tunes. You
can play back built-in tunes for your own listening pleasure,
or you can use them for practice and even sing-along. Built-
in tunes are divided between the two groups described below.
3 Use the number buttons to input the tune’s two-
digit number.
Example: To select “42 ALOHA OE”, input 4 and then 2.
Song number
Song name
• Song Bank/Sing Along Group: 50 tunes for one-hand play
The tunes in this group are Auto Accompaniment tunes. A
Song Bank Group tune can be used during a lesson for
melody part practice. If you connect a microphone to the
keyboard and enter the Sing Along Mode*, you can sing
along with the built-in tune.
A l o h a O e
* The Sing Along Mode reduces the volume of the melody
part of the built-in tunes and changes the tone selection
to one that makes it easier for a vocalist to follow.
• Piano Bank Group: 50 tunes for two-hand play
The piano tunes in this group are subdivided between 20
etudes and 30 concert pieces. A Piano Bank Group tune can
be used during a lesson for left-hand part and right-hand
part practice.
NOTE
• Tune Number 00 is the initial default Song Bank tune
setting whenever you turn on keyboard power.
• You can also increment the displayed tune number by
pressing [+] and decrement is by pressing [–].
4 Press the PLAY/STOP button to start play of the tune.
To play back a Song Bank tune
Staff display
PREPARATION
• Adjust the main volume (page E-19).
A l o h a O e
1 Find the tune you want to play in the SONG BANK/
SING ALONG List, and note its number.
• See page A-10 for the Song Bank/Sing Along List.
2 Press the SONG BANK button to enter the Song
Keyboard keys used
Chord name
Fingering
Bank Mode.
• This causes the SONG BANK button to light.
5 Press the PLAY/STOP button to stop playback of
the Song Bank tune.
• The tune you select continues to play until you stop
it.
Indicators
appear
E-22
704A-E-024A
CTK591_e_22-31.p65
22
03.10.7, 4:27 PM
Download from Www.Somanuals.com. All Manuals Search And Download.
Playing a Built-in Tune
To play back a Piano Bank tune
Musical Information System
When the keyboard is playing one of its built-in tunes, the
display shows a variety of information about the tune.
1 Find the tune you want to play in the PIANO BANK
List, and note its number.
Example: Display during Song Bank play
• See page A-11 for the Piano Bank List.
Staff display
2 Press the PIANO BANK button to specify the Piano
Bank group.
A l o h a O e
Indicators
appear
Keyboard keys used
Chord name
Fingering
NOTE
• Pressing the PIANO BANK button changes the tone to
stereo piano (Tone Number 000).
NOTE
• Chord names are not displayed for Piano Bank tunes.
3 Use the number buttons to input the two-digit tune
number you looked up in step 1.
Example: To select tune number 16 (Ode To Joy), input
1 and then 6.
Adjusting the Tempo
Each tune has a preset default tempo (beats per minute) that
is set automatically whenever you select a tune. While the
tune is playing, you can change the tempo setting to a value
in the range of 40 to 255.
y
To set the tempo
NOTE
• Tune Number 00 is the initial default Piano Bank tune
setting whenever you turn on keyboard power.
• You can also change the displayed tune number using
the [+] and [–] buttons.
1 Use the TEMPO buttons to set the tempo.
: Increases the tempo value.
: Decreases the tempo value.
Flash
4 Press the PLAY/STOP button to start playback.
5 To stop playback, press the PLAY/STOP button.
Tempo value
• The tune you select continues to play until you stop
it.
NOTE
• While the tempo value is flashing, you can also use the
number buttons or [+] and [–] to input a three-digit value.
Note that you must input leading zeros, so 90 is input
as 090.
• Pressing both the and TEMPO buttons at the same
time automatically returns the currently selected rhythm
to its default tempo.
• Piano Bank tunes have tempo changes part way through
in order to produce specific musical effects. Note that
the tempo setting automatically returns to the default
whenever a tempo change occurs within one of these
tunes.
704A-E-025A
E-23
CTK591_e_22-31.p65
23
03.10.7, 4:27 PM
Download from Www.Somanuals.com. All Manuals Search And Download.
Playing a Built-in Tune
PIANO BANK
SONG BANK
TONE
Number buttons
[+] / [–]
REW
FF
PAUSE
PLAY/STOP
To pause playback
To fast forward
1 Press the PAUSE button while a tune is playing to
1 While a tune is playing or paused, hold down the
pause it.
FF button to skip forward at high speed.
• The fast forward operation skips forward one measure
at a time.
2 Pressing the PAUSE button again resumes play from
• The measure and beat numbers on the display change
while the fast forward operation is being performed.
the point where it was paused.
To fast reverse
1 While a tune is playing or paused, hold down the
Measure number
Beat number
REW button to skip in a reverse direction at high
speed.
2 Releasing the FF button starts song playback from
• The fast reverse operation skips back one measure at
a time.
the measure whose number is shown on the display.
• The measure and beat numbers on the display change
while the fast reverse operation is being performed.
NOTE
• Fast forward does not work while tune play is stopped.
Measure number
Beat number
2 Releasing the REW button starts song playback from
the measure whose number is shown on the display.
NOTE
• Fast reverse does not work while tune play is stopped.
• Certain playback conditions can cause it to take some
time before fast reverse starts after you press the REW
button.
E-24
704A-E-026A
CTK591_e_22-31.p65
24
03.10.7, 4:27 PM
Download from Www.Somanuals.com. All Manuals Search And Download.
Playing a Built-in Tune
To change the melody tone
To play all tunes in succession
1 Press the TONE button.
1 Press the SONG BANK button and PIANO BANK
button at the same time.
• Playback starts from Song Bank tune number 00,
followed in sequence by Piano Bank tunes.
• Both the SONG BANK button and PIANO BANK
button are lit during demo play.
Indicator appears
2 To stop tune play, press the PLAY/STOP button.
2 Find the tone you want in the TONE List, and then
use the number buttons to input its three-digit
NOTE
number.
• While a tune is playing, you can use the number buttons
or [+] and [–] to change to another tune.
Example: To select “057 VIOLIN”, input 0, then 5, then
• You can play along with the tunes on the keyboard.
7.
• You can select any one of the keyboard’s 255 built-in
tones.
i n
NOTE
• You can also use the [+] and [–] buttons to change the
melody tones.
• For two-hand tunes (Piano Bank tunes), the same tone
is applied for both the left and right hand parts.
• Specifying the tune number for the same tune that is
currently selected returns the melody tone to the default
setting for that tune.
704A-E-027A
E-25
CTK591_e_22-31.p65
25
03.10.7, 4:27 PM
Download from Www.Somanuals.com. All Manuals Search And Download.
Advanced 3-Step Lesson
With the Advanced 3-Step Lesson System, you can practice
Two-hand Tunes (Piano Bank)
the built-in tunes and even plot your progress according to
the evaluation points the keyboard awards you.
The 3-Step Lesson System lets you practice at your own pace.
With the Evaluation Mode, you can get an idea of how much
you are progressing. You can even find out what phrases in
your performance need more work and concentrate your
practice there.
These types of tunes are played with both hands, as in a piano
solo. When using these tunes for a 3-step lesson, you can
practice playing along with both the left hand and right hand
parts.
Display Contents During 3-step
Lesson Play
Whenever you select an Auto Accompaniment tune for 3-
step lesson play, the on-screen keyboard guide and staff
notation shows the note you should play and its length. The
on-screen keyboard guide also shows the notes you play on
the keyboard. The following describes the information that
appears on the display.
Lesson Progress
Step 1
Evaluation 1
Step 2
Evaluation 2
Step 3
Targeted Practice
Note Pitch
3-Step Lesson
The key you should press lights on the on-screen keyboard
guide, while the actual pitch of the note appears in the
display’s staff notation area. The fingers you should use to
play the notes are also shown on the display.
The 3-step lesson feature takes you through the three distinct
steps described below to help you learn to play tunes on the
keyboard.
Step 1 – Master the timing.
Note Length
In this step, pressing any key on the keyboard plays the
correct note, so you can concentrate on getting the timing
right without worrying about playing the right note.
Accompaniment (left-hand part) waits until you press a key
before proceeding to the next phrase.
The key stays lit on the on-screen keyboard guide for as long
as the note should be sustained. The staff notation and
fingerings also remain on the display for the length of the
note.
Next Note
Step 2 – Master the notes.
An on-screen keyboard guide key flashes to indicate the next
note to be played, while a number appears on the display
near the finger you should use to play the next note.
In this step, you learn the keys to press to play the notes. The
keys you need to press light on the on-screen keyboard guide,
so simply follow along as you learn to play. Accompaniment
(left-hand part) waits until your play the correct note, so you
can learn at your own pace.
Series of Same Pitch Notes
The on-screen keyboard guide key turns off momentarily
between the notes, and lights again for each successive note.
The staff notation and fingerings also turn off and back on
again.
Step 3 – Play at normal speed.
This is where you enjoy actually playing the tunes you learn
using Step 1 and Step 2. The on-screen keyboard guide still
shows you which keyboard keys to press, but accompaniment
proceeds at normal speed regardless of whether or not you
play the correct notes.
Example: When play requires pressing keys with fingers
3, 2, and then 1
1st Note
2nd Note
3rd Note
Tune Types and Their Parts
Next note
Current note
The built-in tunes of this keyboard are divided between two
basic groups: Auto Accompaniment tunes (Song Bank) and
two-hand accompaniment tunes (Piano Bank). The parts
available for 3-step lesson practice depend on the type of tune
you are using.
Lit
Lit
Flash
Flash
Lit
Flash
On-screen
keyboard
guide
Auto Accompaniment Tunes (Song Bank)
As their name suggests, these tunes are made up of an Auto
Accompaniment part and a melody part. When using these
tunes for a 3-step lesson, you can practice playing along with
the melody (right hand) part only.
E-26
704A-E-028A
CTK591_e_22-31.p65
26
03.10.7, 4:27 PM
Download from Www.Somanuals.com. All Manuals Search And Download.
Advanced 3-Step Lesson
NOTE
Using Tone and Voice Guide
• Note length is not indicated when you are using two-
hand tunes with 3-step lesson Steps 1 and 2. As soon
as you press a key that is lit on the on-screen keyboard
guide, it goes out and the next key you need to press
starts to flash.
• Note length is indicated by the on-screen keyboard guide
when you use two-hand tunes with Step 3. In this case,
the next key to be pressed does not flash when you
press a lit key and the next finger number does not
appear on the display. Only the current finger number is
shown.
When the keyboard senses that your timing is off, it will let
you know by changing the notes you play to a tone that is
different from the one you currently have selected. In the
Evaluation Mode, a simulated human voice will also tell you
your evaluation level. The sound effect keeps you informed
of when your evaluation level is about to change.
Expressions
“Good”
<High>
“That’s close”
“Nice try!”
“Keep trying!”
Evaluation Ranges
<Low>
“Take your time” : This expression is used if you do not
play the correct note for a long time.
3-step Lesson Tempo Setting
Use the procedure under “Adjusting the Tempo” on page E-
23 to adjust the tempo for 3-step lesson play.
Evaluation Results
After you finish playing, the keyboard calculates an
evaluation of your total performance, from beginning to end,
and displays your total score on the monitor screen. The
greater the score, the higher your evaluation is.
Evaluation Mode
The keyboard’s Evaluation Mode awards points to your
performances during Step 1 and Step 2 of the 3-Step Lesson.
A perfect score is 100. Also, the Evaluation Mode provides
comments about your play, both on the monitor screen and
by means of a simulated human voice.
Evaluation Rank Display Messages and Sound Effects
Display Message
Sound Effect
“Bravo!”
Applause and
cheering
<High>
Evaluation Mode Display
Level Indicator (9 Levels): This indicator shows the evaluation
of your current performance at a glance. The more segments
that appear, the higher your points.
“Great”
“Not bad!”
“Again!”
Applause only
None
None
Evaluation Ranges
<Low>
“****” : indicates that the Evaluation Mode was exited
before an evaluation result could be obtained.
Example: 50 points
NOTE
• If your play is flawless, the message “Perfect!” appears
before the evaluation result.
• If you press the PLAY/STOP button and interrupt the
Evaluation Mode part way through, the monitor screen
shows the evaluation points you have accumulated up
to that point. In this case, the keyboard does not display
a message and play a sound effect.
Timing Indicator: In the Evaluation Mode, the configuration
of the star changes with each note to let
you know how your timing is. The more
stars, the better your timing.
Using the Lesson Functions and
Evaluation Mode
Perform the following steps to master your favorite tunes.
704A-E-029A
E-27
CTK591_e_22-31.p65
27
03.10.7, 4:27 PM
Download from Www.Somanuals.com. All Manuals Search And Download.
Advanced 3-Step Lesson
PIANO BANK
SONG BANK
LEFT
SCORING 1
SCORING 2
STEP 1
STEP 2
PLAY/STOP
4 To stop play at any time, press the PLAY/STOP
Step 1 – Master the timing.
button.
1 Select the tune you want to use.
NOTE
• Left hand practice can also be performed with Piano
Bank tunes. Simply select one of the two-hand tunes in
step 1 of the above procedure, and then press the LEFT
button following step 2.
• 3-step lesson does not allow simultaneous practice of
both hands.
2 Press the STEP 1 button to start Step 1 play.
• After a count sounds, they keyboard stands by and
waits for you to play the first note of the tune.
Note pitch
Indicator appears
• You can also use fast forward and fast reverse operations
with Step 1 play.
• You cannot pause Step 1 play.
A l o h a O e
• Rhythm does not sound during Step 1 play.
Evaluation 1: Find out how the
keyboard evaluates your Step 1 play.
Keyboard keys used
Fingering
Use the SCORING 1 button to check the evaluation of your
play in Step 1.
• The hand you should use is indicated by arrows
around it.
1 Press the SCORING 1 button.
• This causes the SCORING 1 indicator to appear on
the display.
• A count beat sounds and then evaluation mode starts.
Indicator appears
Indicators
3 Press any keyboard keys to play the notes.
• The key for the next note to be played flashes on the
on-screen keyboard guide and the keyboard waits for
you to play it. When you press any key to play the
note, the on-screen key remains lit as the note plays.
• Accompaniment (left-hand part) waits until you press
any key to play a note.
2 Play in accordance with the guidance on the
• If you accidentally press more than one key in
succession, accompaniment is played for the
corresponding number of notes.
• Pressing more than one key at the same time counts
as a single note. Pressing a key while another key is
held down is counted as two notes.
monitor screen and as told by the voice.
• To stop evaluation, press the PLAY/STOP button. This
displays only the points accumulated up to that point.
E-28
704A-E-030A
CTK591_e_22-31.p65
28
03.10.7, 4:27 PM
Download from Www.Somanuals.com. All Manuals Search And Download.
Advanced 3-Step Lesson
3 After you finished playing, your evaluation result
NOTE
appears on the display.
• Left hand practice can also be performed with Piano
Bank tunes. Simply select one of the two-hand tunes in
step 1 of the above procedure, and then press the LEFT
button following step 2.
• 3-step lesson does not allow simultaneous practice of
both hands.
• You can also use fast forward and fast reverse operations
with Step 2 play.
• You cannot pause Step 2 play.
• For information about evaluation ranks and sound
effects, see “Evaluation Results” on page E-27.
• The keyboard will tell you where you scored the
lowest during your performance, so you can find out
where you need the most work. See “Using the Phrase
Practice Mode” on page E-30 for more information.
• Pressing the SONG BANK button or PIANO BANK
button returns to the tune selection screen.
• Rhythm does not sound during Step 2 play.
Evaluation 2: Find out how the
keyboard evaluates your Step 2 play.
Step 2 – Master the notes.
Use the SCORING 2 button to check the evaluation of your
play in Step 2.
1 Select the tune you want to use.
1 Press the SCORING 2 button.
• This causes the SCORING 2 indicator to appear on
the display.
2 Press the STEP 2 button to start Step 2 play.
• After a count sounds, the keyboard stands by and
waits for you to play the first note of the tune.
• A count beat sounds and then evaluation mode starts.
Indicator appears
Indicator appears
A l o h a O e
Keyboard keys used
Fingering
2 Play in accordance with the guidance on the
monitor screen and as told by the voice.
3 Play the notes as indicated by the on-screen
• To stop evaluation, press the PLAY/STOP button. This
displays only the points accumulated up to that point.
keyboard guide.
• The key for the next note to be played flashes on the
on-screen keyboard guide and the keyboard waits for
you to play it. When you press any key to play the
note, the on-screen key remains lit as the note plays.
• If multiple keys light on the on-screen keyboard guide
when you are using a two-hand tune, it means that
you must press all of the keys that are lit.
3 After you finished playing, your evaluation result
appears on the display.
• For information about evaluation ranks and sound
effects, see “Evaluation Results” on page E-27.
• The keyboard will tell you where you scored the
lowest during your performance, so you can find out
where you need the most work. See “Using the Phrase
Practice Mode” on page E-30 for more information.
• Pressing the SONG BANK button or PIANO BANK
button returns to the tune selection screen.
4 To stop play at any time, press the PLAY/STOP
button.
704A-E-031A
E-29
CTK591_e_22-31.p65
29
03.10.7, 4:27 PM
Download from Www.Somanuals.com. All Manuals Search And Download.
Advanced 3-Step Lesson
SPEAK
METRONOME
LEFT
Number buttons
[+] / [–]
PRACTICE PHRASE
SCORING 2
TEMPO
STEP 1
SCORING 1
STEP 3
STEP 2
PLAY/STOP
Step 3 – Play at normal speed.
Using the Phrase Practice Mode
Perform the following procedure to find out where you scored
the lowest in your performance, so you can find your weak
points and focus your practice on those phrases.
1 Select the tune you want to play.
2 Press the STEP 3 button to start Step 3 play.
1 After displaying your evaluation results, press the
• Accompaniment (left hand part) starts to play at
normal speed.
PRACTICE PHRASE button.
Indicator appears
A l o h a O e
• This displays the Phrase Practice Mode screen, which
shows the phrase (start measure number and end
measure number) where your evaluation mode was
the lowest. This is the “practice phrase”.
NOTE
Keyboard keys used
Fingering
• If there are multiple phrases that qualify as the lowest
score, the phrase closest to the beginning of the tune is
used for phrase practice.
3 Play the notes as indicated by the on-screen
• If there is no section that qualifies for phrase practice,
keyboard guide.
“
-
” is displayed in place of the start and end
*** ***
measures.
4 To stop play at any time, press the PLAY/STOP
• Phrase practice measures are cleared if you change to
another tune or another mode.
button.
NOTE
• Left hand practice can also be performed with Piano
Bank tunes. Simply select one of the two-hand tunes in
step 1 of the above procedure, and then press the LEFT
button following step 2.
• 3-step lesson does not allow simultaneous practice of
both hands.
To play back the practice phrase
1 While the Phrase Practice Mode screen is on the
display, press the PLAY/STOP button.
• This plays back the phrase starting from the start
measure number.
• You can also use pause, fast forward and fast reverse
operations with Step 3 play.
• Playback continues until the end of the tune is
reached. After that, playback automatically jumps to
the beginning of the tune. Note that playback of the
practice phrase is not repeated automatically.
NOTE
• With some tunes, it may take a few seconds for playback
to start after you press the PLAY/STOP button in the
above procedure.
E-30
704A-E-032A
CTK591_e_22-31.p65
30
03.10.7, 4:27 PM
Download from Www.Somanuals.com. All Manuals Search And Download.
Advanced 3-Step Lesson
To practice the practice phrase
To start the metronome
1 While the Phrase Practice Mode screen is on the
1 Press the METRONOME button to start sounding
display, press the STEP 1, STEP 2, or STEP 3 button.
• This starts 3-Step Lesson playback of the practice
phrase in accordance with the STEP button you
pressed.
the metronome.
• This causes “Beat” to appear on the display. Perform
step 2 within five seconds after “Beat” appears.
2 Play along on the keyboard.
• Playback continues until the end of the tune is
reached. After that, playback automatically jumps to
the beginning of the tune. Note that playback of the
practice phrase is not repeated automatically.
• To stop playback, press the PLAY/STOP button.
2 Use the number buttons or [+] and [–] to change
the number of beats per measure.
• You can specify the number of beats per measure a
value from 1 to 6.
Voice Fingering Guide
Voice fingering guide uses a simulated human voice to call
out fingering numbers during Step 1 and Step 2 one-hand
part practice. If you need to press a key with your thumb, for
example, voice fingering guide says, “One!” In the case of a
chord to be played with your thumb, middle and little finger,
voice fingering guide says, “One, three, five!”
NOTE
• The bell (indicating the first beat of a measure) does not
sound while one beat per measure is specified. All beats
are indicated by a click sound. This setting lets you
practice with a steady beat, without worrying about how
many beats there are in each measure.
Voice Fingering Guide calls out fingerings only when you do
not press the proper key when you should.
Voice Fingering Guide
3 Use the TEMPO buttons to set the tempo.
• Press to increase the tempo (make if faster) or to
decrease it (make it slower).
One : Thumb
Two : Forefinger
Three : Middle finger
Four : Ring finger
Five : Little finger
Flash
Tempo value
To turn voice fingering guide on or off
Press the SPEAK button to toggle voice fingering guide on
(voice fingering guide indicator displayed) and off (indicator
not displayed).
NOTE
• While the tempo value is flashing, you can also use the
number buttons or [+] and [–] to input a three-digit value.
Note that you must input leading zeros, so 90 is input
as 090.
• Pressing both the and TEMPO buttons at the same
time automatically returns the currently selected rhythm
or tune to its default tempo.
Indicator
appears
NOTE
• Note that Voice Fingering is disabled in the Evaluation
Mode. Pressing the SCORING 1 or SCORING 2 button
automatically turns off Voice Fingering.
4 To turn off the metronome, press the METRONOME
button.
• Exiting the Evaluation Mode automatically restores the
Voice Fingering setting that was in effect when you
entered the Evaluation Mode.
NOTE
• The metronome is disabled whenever you are using Step
1 or Step 2 of the 3-step lesson.
• Starting play of a two-hand tune or Step 3 of the 3-step
lesson while the metronome is operating or activating
the metronome while either of the two above operations
is already in progress causes the metronome to sound
in time with the Auto Accompaniment played by the
keyboard. At this time, the tempo of the metronome beat
changes to that of the default tempo for the Auto
Accompaniment being played.
Using the Metronome
The metronome feature of this keyboard produces a bell
sound for the first beat of each measure, followed by click
sounds for each successive beat of the measure. It is the perfect
tool for practicing tunes without accompaniment (rhythm).
704A-E-033A
E-31
CTK591_e_22-31.p65
31
03.10.7, 4:27 PM
Download from Www.Somanuals.com. All Manuals Search And Download.
Using a Microphone for Sing Along
MIC jack
SING ALONG
Number buttons
MIC VOLUME
[+] / [–]
KEY CONTROL/
TRANSPOSE
<PLAY/STOP>
You can select any of the 50 Song Bank/Sing Along Group
tunes and sing along with its accompaniment.
Required Microphone Specifications
• Microphone Type
: Metal shielded (microphone
body)
• Microphone and Cord
Connector
Using the microphone jack
: Cannon type (3-prong)
• Keyboard Jack Connector : Standard plug (monaural)
Connecting a commercially available microphone* to the MIC
jack makes it possible to sing along with the keyboard’s built-
in tunes or with output from a MIDI device. When connecting
a microphone, be sure to first adjust the MIC VOLUME to a
relatively low setting, and then adjust to the level you want
after connecting.
* If a microphone was included with your keyboard, use that
microphone. If your keyboard did not come with a
microphone, use a commercially available microphone that
satisfies the stipulated specifications.
IMPORTANT!
• Connection to the MIDI terminal of an external device
can cause static in the microphone signal. Use of a
Cannon type microphone with a metal-shielded body
helps to prevent static.
• Be sure to disconnect the microphone from the keyboard
whenever you are not using it.
Howling (Feedback Noise)
Any of the following conditions can cause howling (feedback
noise).
1 Set the MIC VOLUME knob setting so it is on the
“MIN” side.
2 Turn on the microphone’s ON/OFF switch.
• Covering the head of the microphone with your hand
• Positioning the microphone too near to a speaker
3 Use the MIC VOLUME knob to adjust microphone
Should howling occur, try grasping the microphone further
away from the head, and move away from any nearby
speaker.
volume to the level you want.
Microphone ON/OFF switch
Microphone
Static Noise
Fluorescent lighting can cause static noise in the microphone
signal. When this happens, move away from the lighting you
suspect may be causing the static.
Cannon type (3-prong)
MIC VOLUME knob
IMPORTANT!
• Be sure to use the microphone’s ON/OFF switch to turn
off the microphone and to disconnect the microphone
from the keyboard whenever you are not using it.
E-32
704A-E-034A
CTK591_e_32-40.p65
32
03.10.7, 4:27 PM
Download from Www.Somanuals.com. All Manuals Search And Download.
Using a Microphone for Sing Along
NOTE
To use a microphone for sing along
• To return a tune to its default key, press both of the KEY
CONTROL/TRANSPOSE buttons ( and ) at the
same time.
PREPARATION
• Adjust the main volume (page E-19), accompaniment
volume (page E-49), and microphone volume (page E-
32).
1 Find the tune you want in the SONG BANK/SING
ALONG List, and note its number.
• See page A-10 for the Song Bank/Sing Along List.
2 Press the SING ALONG button to enter the Sing
Along Mode.
• This causes the SING ALONG button to light.
Indicators
appear
3 Use the number buttons to input the two-digit song
number.
Example: To select “ALOHAOE”, which is song number
42, input 4 and then 2.
NOTE
• The initial power on default tune setting is “00”.
• You can also specify the song number using the [+] and
[–] buttons.
4 Press the <PLAY/STOP> button to start tune play.
• Now use the microphone to sing along with the
playback.
• The Sing Along Mode is similar to the Song Bank
Mode. The only difference is that the melody part in
the Sing Along Mode is played back at a lower
volume. Also a different tone setting is used in the
Sing Along mode to make sing along easier.
5
Use the KEY CONTROL/TRANSPOSE buttons (
to change the overall key of the playback, if you want.
: Raises the key by one semitone
/
)
: Lowers the key by one semitone
6 Press the <PLAY/STOP> button to stop tune play.
• The same song plays in an endless loop until you stop
it.
704A-E-035A
E-33
CTK591_e_32-40.p65
33
03.10.7, 4:27 PM
Download from Www.Somanuals.com. All Manuals Search And Download.
Auto Accompaniment
RHYTHM
Number buttons
[+] / [–]
TEMPO
MODE
START/STOP
This keyboard automatically plays bass and chord parts in
accordance with the chords you finger. The bass and chord
parts are played using sounds and tones that are
automatically selected to select the rhythm you are using.
All of this means that you get full, realistic accompaniments
for the melody notes you play with your right hand, creating
the mood of an one-person ensemble.
Selecting a Rhythm
This keyboard provides you with 120 exciting rhythms that
you can select using the following procedure.
To select a rhythm
1 Find the rhythm you want to use in the RHYTHM
List and note its rhythm number.
• Not all of the available rhythms are shown on the
rhythm list printed on the keyboard console. For a
complete list, see the “Rhythm List” on page A-9.
2 Press the RHYTHM button.
p
Indicator appears
3 Use the number buttons to input the three digit
rhythm number for the rhythm you want to select.
Example: To select “076 RHUMBA”, input 0, 7 and then
6.
R h u m b a
NOTE
• You can also increment the displayed rhythm number
by pressing [+] and decrement it by pressing [–].
• Some rhythms consist of chord accompaniments only,
without any drums or other percussion instruments. Such
rhythms do not sound unless CASIO CHORD,
FINGERED, or FULL RANGE CHORD is selected as
the accompaniment mode.
E-34
704A-E-036A
CTK591_e_32-40.p65
34
03.10.7, 4:27 PM
Download from Www.Somanuals.com. All Manuals Search And Download.
Auto Accompaniment
Playing a Rhythm
Using Auto Accompaniment
Use the following procedure to start and stop rhythm play.
The following procedure describes how to use the keyboard’s
Auto Accompaniment feature. Before starting, you should
first select the rhythm you want to use and set the tempo of
the rhythm to the value you want.
To play a rhythm
1 Set the MODE switch to NORMAL.
To use Auto Accompaniment
2 Press the START/STOP button to start play of the
1 Set the MODE switch to CASIO CHORD,
currently selected rhythm.
FINGERED, or FULL RANGE CHORD.
3 To stop rhythm play, press the START/STOP button
2 Press the START/STOP button to start play of the
again.
currently selected rhythm.
NOTE
3 Play a chord.
• All of the keyboard keys are melody keys while the
MODE switch is set to NORMAL.
• The actual procedure you should use to play a chord
depends on the current MODE switch position. Refer
to the following pages for details on chord play.
CASIO CHORD .......................... Page E-36
FINGERED ................................... Page E-37
FULL RANGE CHORD ............. Page E-37
Adjusting the Tempo
The tempo (beats per minute) can be set to a value in the
range of 40 to 255. The tempo value you set is use for Song
Bank, 3-step lesson, and Auto Accompaniment chord play,
as well as playback from memory and metronome operation.
Basic Chord Form
R h u m b a
To set the tempo
1 Use the TEMPO buttons to set the tempo.
: Increase the tempo value.
: Decreases the tempo value.
(The chord form that appears here may show
notes that differ from those actually pressed on
the keyboard. With some chords, inverted chord
Chord name
Flash
Metronome
forms may be displayed.)
Tempo value
4 To stop Auto Accompaniment play, press the START/
STOP button again.
Beat number
NOTE
• You can adjust the accompaniment part volume level
independently of the main volume. For details, see
“Adjusting the Accompaniment Volume” on page E-49.
NOTE
• While the tempo value is flashing, you can also use the
number buttons or [+] and [–] to input a three-digit value.
Note that you must input leading zeros, so 90 is input
as 090.
• Pressing both the and TEMPO buttons at the same
time automatically returns the currently selected rhythm
to its default tempo.
704A-E-037A
E-35
CTK591_e_32-40.p65
35
03.10.7, 4:27 PM
Download from Www.Somanuals.com. All Manuals Search And Download.
Auto Accompaniment
Chord Types
CASIO CHORD
CASIO CHORD accompaniment lets you play four types of
chords with minimal fingering.
This method of chord play makes it possible for anyone to
easily play chords, regardless of previous musical knowledge
and experience. The following describes the CASIO CHORD
“Accompaniment keyboard” and “Melody keyboard”, and
tells you how to play CASIO CHORDs.
Chord Types
Example
Major chords
Major chord names are marked
above the keys of the
accompaniment keyboard. Note that
the chord produced when you press
an accompaniment keyboard does
not change octave, regardless of
which key you use to play it.
C Major (C)
CDE F GABCDE F
CASIO CHORD Accompaniment Keyboard and Melody
Keyboard
Accompaniment
Melody keyboard
keyboard
Minor chords (m)
C minor (Cm)
To play a minor chord, keep the
major chord key depressed and
press any other accompaniment
keyboard key located to the right of
the major chord key.
CDE F GABCDE F
NOTE
• The accompaniment keyboard can be used for playing
chords only. No sound will be produced if you try playing
single melody notes on the accompaniment keyboard.
Seventh chords (7)
C seventh (C7)
To play a seventh chord, keep the
major chord key depressed and
press any other two accompaniment
keyboard keys located to the right
of the major chord key.
CDE F GABCDE F
Minor seventh chords (m7)
To play a minor seventh chord, keep
the major chord key depressed and
press any other three
C minor seventh (Cm7)
CDE F GABCDE F
accompaniment keyboard keys
located to the right of the major
chord key.
NOTE
• It makes no difference whether you press black or white
keys to the right of a major chord key when playing minor
and seventh chords.
E-36
704A-E-038A
CTK591_e_32-40.p65
36
03.10.7, 4:27 PM
Download from Www.Somanuals.com. All Manuals Search And Download.
Auto Accompaniment
NOTE
FINGERED
• Except for the chords specified in note*1 above, inverted
fingerings (i.e. playing E-G-C or G-C-E instead of C-E-
G) will produce the same chords as the standard
fingering.
• Except for the exception specified in note*2 above, all
of the keys that make up a chord must be pressed.
Failure to press even a single key will not play the desired
FINGERED chord.
FINGERED provides you with a total of 15 different chord
types. The following describes the FINGERED
“Accompaniment keyboard” and “Melody keyboard”, and
tells you how to play a C-root chord using FINGERED.
FINGERED Accompaniment Keyboard and Melody
Keyboard
Accompaniment
Melody keyboard
keyboard
FULL RANGE CHORD
This accompaniment method provides a total of 38 different
chord types: the 15 chord types available with FINGERED
plus 23 additional types. The keyboard interprets any input
of three or more keys that matches a FULL RANGE CHORD
pattern to be a chord. Any other input (that is not a FULL
RANGE CHORD pattern) is interpreted as melody play.
Because of this, there is no need for a separate accompaniment
keyboard, so the entire keyboard, from end to end, can be
used for both melody and chords.
NOTE
• The accompaniment keyboard can be used for playing
chords only. No sound will be produced if you try playing
single melody notes on the accompaniment keyboard.
C
Cm
Cdim
FULL RANGE CHORD Accompaniment Keyboard and
Melody Keyboard
Accompaniment keyboard/Melody keyboard
Caug*1
Cm7*2
C7ꢁ5 *1
Cmadd9*2
Csus4
Cmaj7*2
C7sus4
CmM7*2
C7*2
Cm7ꢁ5
Cadd9*2
Cdim7*1
< Chords Recognized by This Keyboard >
Chord Types
Number of Types
15 (on this page)
Corresponding
FINGERED Chord
23
The following are examples of chords
that use C as the bass note.
C6 • Cm6 • C69
ꢀ
ꢁ
ꢁ
C
C
D
C
ꢀ
E
C
F
C
G
C
A
C
B
C
Other Chords
•
•
•
•
•
•
•
ꢁ
B
C
C m Dm Fm Gm Am B m
•
•
•
•
•
•
C
C
C
C
C
C
ꢁ
ꢁ
ꢁ
5
Dm7
C
A
7
F7 Fm7 Gm7 A add9
C
•
•
•
•
See the FINGERED Chord Chart on page A-5 for details on
playing chords with other roots.
C
C
C
C
*1: Inverted fingerings cannot be used. The lowest note is
the root.
*2: The same chord can be played without pressing the 5th
G.
704A-E-039A
E-37
CTK591_e_32-40.p65
37
03.10.7, 4:27 PM
Download from Www.Somanuals.com. All Manuals Search And Download.
Auto Accompaniment
INTRO
MODE
NORMAL/FILL-IN
START/STOP
VARIATION/FILL-IN
SYNCHRO/ENDING
Example: To play the chord C major.
Using an Intro Pattern
This keyboard lets you insert a short intro into a rhythm
pattern to make startup smoother and more natural.
Any of the fingerings shown in the illustration below will
produce C major.
1
The following procedure describes how to use the Intro
feature. Before starting, you should first select the rhythm
you want to use, and set the tempo.
E
G
C
C
To insert an intro
E
G
1 .... Chord C
1 Press the INTRO button to start the selected rhythm
2
C
2 .... Chord C
with an intro pattern.
E
• With the above setup, the intro pattern is played and
the auto accompaniment with intro pattern starts as
soon as you play chords on the accompaniment
keyboard.
NOTE
• As with the FINGERED mode (page E-37), you can play
the notes that form a chord in any combination (1).
• When the composite notes of a chord are separated by
6 or more notes, the lowest sound becomes the bass
(2).
NOTE
• The standard rhythm pattern starts to play after the intro
pattern is complete.
• Pressing the VARIATION/FILL-IN button while an intro
pattern is playing causes the variation pattern to sound
after the intro pattern is complete.
• Pressing the SYNCHRO/ENDING button while an intro
pattern is playing causes the ending pattern to sound
after the intro pattern is complete.
< Music Example >
Tone: 023, Rhythm: 005, Tempo: 070
D
Bm
A
E7
A
G
ꢁ
D
C#
Bm
G
A
A
ꢀ
4
4
ꢀ
ꢄ
ꢄ
ꢇ
ꢄ
ꢄ
ꢄ
ꢄ
ꢄ
ꢅ
ꢈ
ꢂ
ꢂ
ꢂꢂꢂꢂꢂꢃꢂꢂꢂꢂꢂꢃꢂꢂꢂꢂꢂꢃꢂꢂꢂꢂꢂ
ꢉ
ꢊ
ꢄ
ꢄ
ꢄ
ꢄ
ꢄ
ꢄ
ꢄ
ꢄ
ꢄ
ꢄ
ꢄ
ꢄ
ꢄ
ꢄ
ꢄ
ꢄ
ꢄ
ꢄ
ꢀ 4
ꢀ
4
ꢄ
ꢄ
ꢂꢆ
ꢂ
ꢂꢂꢂꢂꢂꢃꢂꢂꢂꢂꢂꢃꢂꢄ ꢂꢂꢀꢄ ꢂꢂꢃꢂꢂꢂꢄ ꢂꢂꢃ
E-38
704A-E-040A
CTK591_e_32-40.p65
38
03.10.7, 4:27 PM
Download from Www.Somanuals.com. All Manuals Search And Download.
Auto Accompaniment
Using a Fill-in Pattern
Fill-in patterns let you momentarily change the rhythm
pattern to add some interesting variation to your
performances.
Using a Fill-in Pattern with a
Variation Rhythm
You can also insert a fill-in pattern while a variation rhythm
pattern is playing.
The following procedure describes how to use the Fill-in
feature.
To insert a fill-in into a rhythm variation
To insert a fill-in
1 While a variation rhythm pattern is playing, press
the VARIATION/FILL-IN button to insert a fill-in
pattern for the variation rhythm you are using.
1 Press the START/STOP button to start rhythm play.
2 Press the NORMAL/FILL-IN button to insert a fill-
in pattern for the rhythm you are using.
Synchro Starting Accompaniment
with Rhythm Play
You can set up the keyboard to start rhythm play at the same
time you play the accompaniment on the keyboard.
NOTE
• The fill-in pattern does not play if you press the
NORMAL/FILL-IN button while an intro pattern is playing.
The following procedure describes how to use synchro start.
Before starting, you should first select the rhythm you want
to use, set the tempo, and use the MODE switch to select the
chord play method you want to use (NORMAL, CASIO
CHORD, FINGERED, FULL RANGE CHORD).
Using a Rhythm Variation
In addition to the standard rhythm pattern, you can also
switch to a secondary “variation” rhythm pattern for a bit of
variety.
To use synchro start
To insert the variation rhythm pattern
1 Press the SYNCHRO/ENDING button to put the
keyboard into synchro start standby.
1 Press the START/STOP button to start rhythm play.
2 Press the VARIATION/FILL-IN button to switch to
the variation pattern for the rhythm you are using.
Flash
NOTE
2 Playing a chord and the rhythm pattern starts to
• To switch back to the standard rhythm pattern, press
the NORMAL/FILL-IN button.
play automatically.
NOTE
• If the MODE switch is set to NORMAL, only the rhythm
plays (without a chord) when you play on the
accompaniment keyboard.
• If you press the INTRO button before playing anything
on the keyboard, the rhythm starts automatically with
an intro pattern when you play something on the
accompaniment keyboard.
• Pressing the VARIATION/FILL-IN button before playing
anything on the keyboard causes play to start with the
variation pattern when something is played on the
keyboard.
• To cancel synchro start standby, press the SYNCHRO/
ENDING button one more time.
704A-E-041A
E-39
CTK591_e_32-40.p65
39
03.10.7, 4:27 PM
Download from Www.Somanuals.com. All Manuals Search And Download.
Auto Accompaniment
ONE TOUCH PRESET
MODE
SYNCHRO/ENDING
Finishing with an Ending Pattern
You can end your performances with an ending pattern that
brings the rhythm pattern you are using to a natural-sounding
conclusion.
The following procedure describes how to insert an ending
pattern. Note that the actual ending pattern played depends
on the rhythm pattern you are using.
Using One-touch Preset
One-touch preset automatically makes the settings listed
below in accordance with the rhythm pattern you are using.
• Keyboard tone
• Layer, Split, or Layer Split on/off
• Layered tone (when layer is turned on), split tone (when
split is turned on), or layered split tone (when layer and
split are turned on)
• Tempo
• Accompaniment volume
To finish with an ending pattern
1 While the rhythm is playing, press the SYNCHRO/
ENDING button.
To use one-touch preset
• This causes the ending pattern to play, which brings
rhythm accompaniment to an end.
1 Select the rhythm you want to use.
NOTE
2 Use the MODE switch to select the accompaniment
• The timing when the ending pattern starts depends on
when you press the SYNCHRO/ENDING button. If you
press the button before the second beat of the current
measure, the ending pattern starts playing immediately.
Pressing the button at any point in the measure after
the second beat results in the ending pattern playing
from the beginning of the following measure.
mode you want to use.
3 Press the ONE TOUCH PRESET button.
• This automatically configures the one-touch preset
settings in accordance with the rhythm you selected,
and enters synchro start standby.
4 Play a chord. This will cause the rhythm pattern to
start to play automatically.
• Accompaniment is played using the one touch preset
settings.
E-40
704A-E-042A
CTK591_e_32-40.p65
40
03.10.7, 4:27 PM
Download from Www.Somanuals.com. All Manuals Search And Download.
Song Memory Function
RHYTHM
TRACK 1
TRACK 2
SONG MEMORY
You can store up to two separate songs in song memory for
later playback. The song memory function records your
keyboard play in real time, as you play it.
SONG MEMORY Button Operation
Each press of the SONG MEMORY button cycles through the
functions shown below.
NOTE
• To use song memory, first press the RHYTHM button to
enter the Rhythm Mode.
Playback
Standby
Record
Standby
Normal
Tracks
The song memory of this keyboard records and plays back
notes much like a standard tape recorder. There are two tracks,
each of which can be recorded separately. Besides notes, each
track can be assigned its own tone number. During playback
you can adjust the tempo to change the speed of playback.
Indicator appears
Flash
Unlit
Selecting a Track
Press the TRACK 1 button to select Track 1 and the TRACK 2
button to select Track 2. The letter “L” (left) appears on the
display to indicate Track 1 is selected, and the letter “R” (right)
appears to indicate Track 2 is selected.
Start
End
Auto Accompaniment
Track 1
Track 2
(rhythm, bass, chords), melody
Melody
Playback
Each press of the TRACK 1 and TRACK 2 button while the
keyboard is in playback standby (see “SONG MEMORY
Button Operation” above) toggles playback of the
corresponding track on and off. The letter that identifies a
track (L or R) appears on the display whenever playback of
that track is turned on.
Data recorded in track
NOTE
• Track 1 is the basic track, which can be used to record
Auto Accompaniment along with the melody. Track 2 can
be used for melody only, and is for adding to what is
recorded in Track 1.
Track 1
Track 2
• Note that each track is independent of the other. This
means that if you make a mistake while recording, you
need to re-record only the track where the mistake was
made.
Playback
turned on
Playback
turned off
• With the above setting, Track 1 will play while Track 2 will
not play.
704A-E-043A
E-41
CTK591_e_41-45.p65
41
03.10.7, 4:27 PM
Download from Www.Somanuals.com. All Manuals Search And Download.
Song Memory Function
TRACK 1
TRACK 2
INTRO
SONG MEMORY
[+] / [–]
MODE
NORMAL/FILL-IN
VARIATION/FILL-IN
START/STOP
SYNCHRO/ENDING
Record
2 Use [+] and [–] to select 0 or 1 as the song number.
• The track is not yet selected at this point.
Each press of the TRACK 1 and TRACK 2 button while the
keyboard is in record standby (see “SONG MEMORY Button
Operation”) toggles recording to the corresponding track on
and off. The letter that identifies a track (L or R) flashes on
the display whenever recording to that track is turned on.
• The above song number screen remains on the display
for about five seconds. If it disappears before you have
a chance to select a song number, use the SONG
MEMORY button to display it again.
Playback
turned on
Record
turned on
Song number
3 Press the TRACK 1 button to select Track 1.
• The “L” flashes on the display to indicate the track
that will be recorded to.
• The above indicates that Track 1 will play back while Track
2 is being recorded to.
Real-time Recording to Track 1
With real-time recording, the notes and chords you play on
the keyboard are recorded as you play them.
To record to Track 1 using real-time
recording
Flash
4 Make any of the following settings if you want.
• Tone number (page E-19)
1 Use the SONG MEMORY button to enter record
• Rhythm number (page E-34)
• MODE switch (page E-35)
standby.
• If you are not confident about playing at a fast tempo,
try using a slower tempo setting (page E-35).
R e c . N o .
5 Press the START/STOP button to start real-time
recording to Track 1.
6 Play something on the keyboard.
• Any melody and accompaniment you play on the
keyboard (including Auto Accompaniment chords
played on the accompaniment keyboard) is recorded.
• If you use a pedal during recording, pedal operations
are also recorded.
Flash
E-42
704A-E-044A
CTK591_e_41-45.p65
42
03.10.7, 4:27 PM
Download from Www.Somanuals.com. All Manuals Search And Download.
Song Memory Function
7 Press the START/STOP button to end recording
Track 1 Real-time Recording
Variations
when you are finished playing.
The following describes a number of different variations you
can use when recording to Track 1 using real-time recording.
All of these variations are based upon the procedure described
under “To record to Track 1 using real-time recording” on
page E-42.
• If you make a mistake while recording, stop the record
operation and begin over again from step 1.
NOTE
• Using real-time recording to record to a track that already
contains recorded data replaces the existing recording
with the new one.
To record without rhythm
Skip step 5. Real-time recording without rhythm starts when
you press a keyboard key.
Track 1 Contents After Real-time
Recording
In addition to keyboard notes and accompaniment chords,
the following data is also recorded to Track 1 during real-
time recording. This data is used whenever Track 1 is played
back.
To start recording with synchro start
In place of step 5, press the SYNCHRO/ENDING button.
AutoAccompaniment and recording will both start when you
play a chord on the accompaniment keyboard.
To record using an intro, ending, or fill-in
During recording, the INTRO, SYNCHRO/ENDING,
NORMAL/FILL-IN, and VARIATION/FILL-IN buttons
(pages E-38 through E-40) can all be used as they normally
are.
• Tone number
• Rhythm number
• INTRO, SYNCHRO/ENDING, NORMAL/FILL-IN,
VARIATION/FILL-IN button operations
• Pedal operations
To synchro start Auto Accompaniment with an intro
pattern
In place of step 5, press the SYNCHRO/ENDING button and
then the INTRO button. Auto Accompaniment will start with
Memory Capacity
The keyboard has memory for approximately 5,100 notes. You
can use all 5,100 notes for a single song, or you can divide
memory between two different songs.
the intro pattern when you play
accompaniment keyboard.
a
chord on the
• The measure number and note number flash on the display
whenever remaining memory is less than 100 notes.
To start Auto Accompaniment part way into a recording
In place of step 5, press the SYNCHRO/ENDING button and
then play something on the melody keyboard to start. When
you reach the point where you want Auto Accompaniment
to start, play a chord on the accompaniment keyboard.
Flash
• Recording automatically stops (and Auto Accompaniment
and rhythm stops playing if they are being used) whenever
memory becomes full.
Memory Data Storage
• Anything previously stored in song memory is replaced
whenever you make a new recording.
• Memory contents are retained as long as the keyboard is
supplied with electrical power. Unplugging the AC adaptor
when batteries are not loaded or when loaded batteries are
dead cuts off the keyboard’s electrical power supply,
causing all data stored in song memory to be deleted. Be
sure to plug the keyboard into an electrical outlet with the
AC adaptor before replacing batteries.
• Turning off the keyboard while a record operation is in
progress causes the contents of the track you are currently
recording to be lost.
704A-E-045A
E-43
CTK591_e_41-45.p65
43
03.10.7, 4:27 PM
Download from Www.Somanuals.com. All Manuals Search And Download.
Song Memory Function
TRACK 1
TRACK 2
SONG MEMORY
[+] / [–]
MODE
TEMPO
START/STOP
NOTE
Playing Back from Song Memory
• During memory playback, the entire keyboard functions
as a melody keyboard, regardless of the MODE switch
setting.
Use the following procedure to play back song memory
contents.
• You can play along on the keyboard while playing back
from song memory. You can also use layer (page E-46)
and split (page E-46) to play along with more than one
tone.
• You cannot use pause, fast forward or fast reverse
operations with song memory playback.
To play back from song memory
1 Use the SONG MEMORY button to enter playback
standby, and then use [+] and [–] to select 0 or 1 as
the song number.
y
Real-time Recording to Track 2
After you record Track 1, you can use real-time recording to
add a melody in Track 2.
• The above song number screen remains on the display
for about five seconds. If it disappears before you have
a chance to select a song number, use the SONG
MEMORY button to display it again.
To record to Track 2 while playing
back Track 1
2 Press the START/STOP button to start playback of
the song you selected.
1 Use the SONG MEMORY button to enter record
standby, and then use [+] and [–] to select 0 or 1 as
the song number.
• During memory playback you can use the TRACK 1
and TRACK 2 buttons to turn playback of either track
on or off.
y
P l a
N o .
• The track is not yet selected at this point.
2 Press the TRACK 2 button to select Track 2.
Indicators appear
R e c . N o .
• You can use the TEMPO buttons to adjust the tempo.
3 Press the START/STOP button again to stop
playback.
Flash
Flash
E-44
704A-E-046A
CTK591_e_41-45.p65
44
03.10.7, 4:27 PM
Download from Www.Somanuals.com. All Manuals Search And Download.
Song Memory Function
3 Make any of the following settings if you want.
• Tone number (page E-19)
Deleting the Contents of a Specific
Track
Use the following procedure to delete all of the data currently
recorded in a specific track.
• If you are not confident about playing at a fast tempo,
try using a slower tempo setting (page E-35).
4 Press the START/STOP button to start real-time
recording to Track 2 along with playback from
Track 1.
To delete all of the data in a specific
track
5 Listening to the playback from Track 1, play what
1 Use the SONG MEMORY button to enter record
standby, and then use [+] and [–] to select the song
(0 or 1) whose track you want to delete.
you want to record to Track 2 on the keyboard.
6 Press the START/STOP button to end recording
when you are finished playing.
• If you make a mistake while recording, stop the record
operation and begin over again from step 1.
NOTE
2 Hold down the SONG MEMORY button until the
• Track 2 is a melody-only track, so chords cannot be
recorded there. Because of this, the entire keyboard is
a melody keyboard, regardless of the MODE switch
setting.
track delete screen appears on the display.
3 Use the TRACK 1 or TRACK 2 button to select the
To record to Track 2 without playing
back Track 1
track whose data you want to delete.
Example: To select Track 1
1 Use the SONG MEMORY button to enter record
standby.
T r . D e l . ?
2 Press the TRACK 1 button to turn off playback of
Track 1.
3 Continue from step 1 under “To record to Track 2
Flash
while playing back Track 1”.
• Note that the above procedure does not turn off
rhythm and Auto Accompaniment.
4 Press the [+] button.
• This deletes the selected track and enters song
memory playback standby.
Track 2 Contents After Real-time
Recording
NOTE
The following data is recorded to Track 2 during real-time
recording.
• The track delete screen is cleared from the display
automatically if you leave the keyboard with the track
delete message on the display for about five seconds
without doing anything.
• Once you select a track in step 3, you cannot change to
a different track without quitting the track delete operation
and starting again.
• Tone number
• Pedal operations
• You cannot select a track for deletion if that track does
not contain any data.
• Pressing the SONG MEMORY button while the track
delete screen is on the display returns to record standby.
704A-E-047A
E-45
CTK591_e_41-45.p65
45
03.10.7, 4:27 PM
Download from Www.Somanuals.com. All Manuals Search And Download.
Keyboard Settings
TONE
Number buttons
[+] / [–]
LAYER
SPLIT
This section describes how to use layer (to play two tones
3 Select the layered tone.
with a single key) and split (to assign different tones to either
end of the keyboard), and how to make touch response,
transpose, and tuning settings.
Example: To select “077 FRENCH HORN” as the layered
tone, use the number buttons or [+] and [–]
buttons to input 0, 7 and then 7.
NOTE
• Note that the layer and split functions are not available
while playing a built-in tune or while using the lesson
functions.
4 Now try playing something on the keyboard.
• Both tones are played at the same time.
5 Press the LAYER button again to unlayer the tones
Using Layer
and return the keyboard to normal.
Layer lets you assign two different tones (a main tone and a
layered tone) to the keyboard, both of which play whenever
you press a key. For example, you could layer the FRENCH
HORN tone on the BRASS tone to produce a rich and brassy
sound.
LAYER
To layer tones
Main Tone (BRASS) + Layered Tone (FRENCH HORN)
1 First select the main tone.
Example: To select “078 BRASS” as the main tone, press
the TONE button and then use the number
buttons or [+] and [–] buttons to input 0, 7 and
then 8.
Using Split
With split you can assign two different tones (a main tone
and a split tone) to either end of the keyboard, which lets
you play one tone with your left hand and another tone with
your right hand. For example, you could select STRINGS as
the main (high range) tone and PIZZICATO STRINGS as the
split (low range) tone, putting an entire string ensemble at
your fingertips.
Split also lets you specify the split point, which is the location
on the keyboard where the changeover between the two tones
occurs.
2 Press the LAYER button.
g
Selected layer tone
Indicator appears
E-46
704A-E-048A
CTK591_e_46-58.p65
46
03.10.7, 4:27 PM
Download from Www.Somanuals.com. All Manuals Search And Download.
Keyboard Settings
To split the keyboard
Using Layer and Split Together
You can use layer and split together to created a layered split
keyboard. It makes no difference whether you layer tones
first and then split the keyboard, or split the keyboard and
then layer tones. When you use layer and split in combination,
the high range of the keyboard is assigned two tones (main
tone + layered tone), and the low range two tones (split tone
+ layered split tone).
1 First select the main tone.
Example: To select “062 STRINGS” as the main tone,
press the TONE button and then use the
number buttons or [+] and [–] buttons to input
0, 6 and then 2.
g
To split the keyboard and then layer
tones
2 Press the SPLIT button.
1 Press the TONE button and then input the tone
number of the main tone.
Indicator appears
2 Press the SPLIT button and then input the number
3 Select the split tone.
Example: To select “060 PIZZICATO STRINGS” as the
split tone, use the number buttons or [+] and
[–] buttons to input 0, 6 and then 0.
of the split tone.
Indicator appears
• After specifying the split tone, press the SPLIT button
to unsplit the keyboard.
4 Specify the split point. While holding down the
SPLIT button, press the keyboard where you want
the leftmost key of the high end range to be.
Example: To specify G3 as the split point, press the G3
key.
3 Press the LAYER button and then input the number
of the layered tone.
• Note that you can reverse steps 2 and 3, specifying
the layered tone first and then the split tone.
Indicator appears
5 Now try playing something on the keyboard.
ꢀ
• Every key from F 3 and below is assigned the
PIZZICATO STRINGS tone, while every key from G3
and above is assigned the STRINGS tone.
4 Press the SPLIT button or the LAYER button so both
of the SPLIT and LAYER indicators are displayed.
6 Press the SPLIT button again to unsplit the keyboard
5 Input the number of the layered split tone.
and return it to normal.
g
SPLIT
6 Specify the split point.
• While holding down the SPLIT button, press the
keyboard where you want the leftmost key of the low
end range to be.
Split Tone
Main Tone (STRINGS)
(PIZZICATO STRINGS)
Split point
704A-E-049A
E-47
CTK591_e_46-58.p65
47
03.10.7, 4:27 PM
Download from Www.Somanuals.com. All Manuals Search And Download.
Keyboard Settings
SETTING
RHYTHM
Number buttons
[+] / [–]
KEY CONTROL/
TRANSPOSE
LAYER
SPLIT
7 Play something on the keyboard.
NOTE
• Press the LAYER button to unlayer the keyboard, and
• The keyboard can be transposed within a range of –12
(one octave downwards) to +12 (one octave upwards).
• The default transpose setting is “00” when keyboard
power is turned on.
the SPLIT button to unsplit it.
LAYER SPLIT
• If you leave the transpose screen on the display for about
five seconds without doing anything, the screen is
automatically cleared.
• The transpose setting also affects playback from memory
and Auto Accompaniment.
• To return the keyboard to its default key, perform the
above procedure and press both of the KEY CONTROL/
Split Tone (PIZZICATO STRINGS)
Main Tone (BRASS)
+
+
Layered Split Tone (STRINGS)
Layered Tone (FRENCH HORN)
TRANSPOSE buttons (
and
) at the same time in
Split point
step 2. You could also use the [+] and [–] buttons to
change the transpose setting to “00”.
• The effect of a transpose operation depends on the pitch
of each note and on the tone you are currently using. If
a transpose operation causes a note to be outside of
the allowable range for a tone, the same note in the
nearest octave within the range will be substituted.
Transposing the Keyboard
Transpose lets you raise and lower the overall key of the
keyboard in semitone units. If you want to play an
accompaniment for a vocalist who sings in a key that’s
different from the keyboard, for example, simply use
transpose to change the key of the keyboard.
Using Touch Response
When touch response is turned on, the relative volume of
sound output by the keyboard is varied in accordance with
the amount of pressure applied, just like an acoustic piano.
To transpose the keyboard
1 Press the RHYTHM button to enter the Rhythm
Mode.
Touch response provides a choice of three settings, described
below.
• Note that you cannot transpose the keyboard while
in the Song Bank Mode or Piano Bank Mode.
OFF: This setting turns off touch response. Keyboard pressure
2 Use the KEY CONTROL/TRANSPOSE buttons (
/
does not have any affect on the output notes.
) to change the key of the keyboard.
: Raises the key by one semitone
: Lowers the key by one semitone
1:This setting provides touch response that is suited for
normal play.
Example: To transpose the keyboard five semitones
2:This setting increases touch response, so stronger keyboard
pressure has a greater effect than the “1” setting.
upwards.
T r a n s .
E-48
704A-E-050A
CTK591_e_46-58.p65
48
03.10.7, 4:27 PM
Download from Www.Somanuals.com. All Manuals Search And Download.
Keyboard Settings
1 Press the SETTING button until the TOUCH
Adjusting the Accompaniment
Volume
RESPONSE SELECT screen appears.
You can adjust the volume of the accompaniment parts as a
value in the range of 000 (minimum) to 127.
2 Use the [+] and [–] or [0] and [1] buttons to change
To adjust the accompaniment volume
the setting.
1 Press the SETTING button twice to display the
Example: To select touch response 2.
accompaniment volume adjustment screen.
p
• Touch response is on when touch response indicator
is on.
Current accompaniment volume setting
2 Use the number buttons or the [+]/[–] buttons to
change the current volume setting value.
Example: 110
p
Indicator appears
NOTE
• Touch response is off when touch response indicator
• The current accompaniment volume value that appears
in Step 1 automatically clears from the display if you do
not input anything within about five seconds.
is off.
• Pressing [+] and [–] buttons at the same time
automatically sets an accompaniment volume of 077.
NOTE
• Touch response not only affects the keyboard’s internal
sound source, it also is output as MIDI data.
• Song memory playback, accompaniment, and external
MIDI note data does not affect the touch response
setting.
About SETTING button
Each press of the SETTING button cycles through a total of
11 setting screens: the touch response screen, the
accompaniment screen, the tuning screen, and 8 MIDI setting
screens (page E-52). If you accidentally pass the screen you
want to use, keep pressing the SETTING button until the
screen appears again.
704A-E-051A
E-49
CTK591_e_46-58.p65
49
03.10.7, 4:27 PM
Download from Www.Somanuals.com. All Manuals Search And Download.
Keyboard Settings
SETTING
Number buttons
[+] / [–]
Tuning the Keyboard
Use the following procedure to fine tune the keyboard to
match the tuning of another musical instrument.
To tune the keyboard
1 Press the SETTING button three times to display
the tuning screen.
2 Use the [+], [–], and the number buttons to adjust
the tuning value.
Example: To lower tuning by 20
NOTE
• The keyboard can be tuned within a range of –50 cents
to +50 cents.
* 100 cents is equivalent to one semitone.
• The default tuning setting is “00” when keyboard power
is turned on.
• If you leave the tuning screen on the display for about
five seconds without doing anything, the screen is
automatically cleared.
• The tuning setting also affects playback from song
memory and Auto Accompaniment.
• To return the keyboard to its default tuning, perform the
above procedure and press the [+] and [–] buttons at
the same time in step 2.
E-50
704A-E-052A
CTK591_e_46-58.p65
50
03.10.7, 4:27 PM
Download from Www.Somanuals.com. All Manuals Search And Download.
MIDI
What is MIDI?
MIDI Channels
MIDI allows you to send the data for multiple parts at the
same time, with each part being sent over a separate MIDI
channel. There are 16 MIDI channels, numbered 1 through
16, and MIDI channel data is always included whenever you
exchange data (key press, pedal operation, etc.)
Both the sending machine and the receiving machine must
be set to the same channel for the receiving unit to correctly
receive and play data. If the receiving machine is set to
Channel 2, for example, it receives only MIDI Channel 2 data,
and all other channels are ignored.
The letters MIDI stand for Musical Instrument Digital
Interface, which is the name of a worldwide standard for
digital signals and connectors that makes it possible to
exchange musical data between musical instruments and
computers (machines) produced by different manufacturers.
MIDI compatible equipment can exchange keyboard key
press, key release, tone change, and other data as messages.
Though you do not need any special knowledge about MIDI
to use this keyboard as a stand-alone unit, MIDI operations
require a bit of specialized knowledge. This section provides
you with an overview of MIDI that will help to get you going.
MIDI Channel 1 Melody
MIDI Channel 2 Bass
MIDI Channel 10 Drums
MIDI IN
Receive MIDI Channel = 1
Plays melody.
MIDI Connections
MIDI keyboard or MIDI sound sourcce
MIDI messages are send out through the MIDI OUT terminal
of one machine to the MIDI IN terminal of another machine
over a MIDI cable. To send a message from this keyboard to
another machine, for example, you must use a MIDI cable to
connect the MIDI OUT terminal of this keyboard to the MIDI
IN terminal of the other machine. To send MIDI messages
back to this keyboard, you need to use a MIDI cable to connect
the other machine’s MIDI OUT terminal to the MIDI IN
terminal of this keyboard.
MIDI OUT
MIDI IN
Receive MIDI Channel = 2
Plays bass.
MIDI keyboard or MIDI sound sourcce
Computer or other MIDI device
MIDI IN
Receive MIDI Channel = 10
Plays drum part.
MIDI keyboard or MIDI sound sourcce
To use a computer or other MIDI device to record and
playback the MIDI data produced by this keyboard, you must
connect the MIDI IN and MIDI OUT terminals of both
machines in order send and receive data.
This keyboard is equipped with multi-timbre capabilities,
which means it can receive messages over all 16 MIDI
channels and play up to 16 parts at the same time.
Keyboard and pedal operations performed on this keyboard
are sent out by selecting a MIDI channel (1 to 16) and then
sending the appropriate message.
MIDI IN
MIDI OUT
MIDI IN MIDI OUT
Computer or other MIDI device
• To use the MIDI THRU function of a connected computer,
sequencer, or other MIDI device, be sure to turn this
keyboard’s LOCAL CONTROL off (page E-54).
704A-E-053A
E-51
CTK591_e_46-58.p65
51
03.10.7, 4:27 PM
Download from Www.Somanuals.com. All Manuals Search And Download.
MIDI
SETTING
Number buttons
[+] / [–]
General MIDI
SETTING Button
Each press of the SETTING button cycles through a total of
11 setting screens: the touch response screen, the
accompaniment screen, the tuning screen, and 8 MIDI setting
screens. If you accidentally pass the screen you want to use,
keep pressing the SETTING button until the screen appears
again. Also note that leaving a setting screen is automatically
cleared from the display if you do not perform any operation
for about five seconds.
As we have already seen, MIDI makes it possible to exchange
musical data between devices produced by different
manufacturers. This musical data does not consist of the notes
themselves, but rather information on whether a keyboard
key is pressed or released, and the tone number.
If tone number 1 on a keyboard produced by Company A is
PIANO while tone number 1 on a Company B's keyboard is
BASS, for example, sending data from Company A's keyboard
to Company B's keyboard produces a result entirely different
from the original. If a computer, sequencer or other device
with auto accompaniment capabilities is used to produce
music data for the Company A keyboard which has 16 parts
(16 channels) and then that data is sent to the Company B
keyboard which can receive only 10 parts (10 channels), the
parts that cannot be played will not be heard.
GM MODE (Default: Off)
on: This keyboard plays General MIDI data from a computer
or other external device. MIDI IN CHORD JUDGE
cannot be used when GM MODE is turned on.
oFF: MIDI IN CHORD JUDGE can be used.
The standard for the tone numbering sequence, the number
of pads, and other general factors that determine the sound
source configuration, which was arrived at by mutual
consultations by manufacturers, is called General MIDI.
The General MIDI standard defines the tone numbering
sequence, the drum sound numbering sequence, the number
of MIDI channels that can be used, and other general factors
that determine the sound source configuration. Because of
this, musical data produced on a General MIDI sound source
can be played back using similar tones and identical nuances
as the original, even when played on another manufacturers
sound source.
1 Press the SETTING button until the GM MODE
screen appears.
Example: When GM MODE is turned off
GM M o d e
This keyboard conforms with General MIDI standards, so it
can be connected to a computer or other device and used to
play back General MIDI data that has been purchased,
downloaded from the Internet, or obtained from any other
source.
2 Use the [+] and [–] or [0] and [1] buttons to turn
the setting on and off.
Example: To turn GM MODE on
GM M o d e
Changing MIDI Settings
You can use this keyboard in combination with an external
sequencer, synthesizer, or other MIDI device to play along
with commercially available General MIDI software. This
section tells you how to make the MIDI settings required
when connecting to an external device.
Indicator appears
E-52
704A-E-054A
CTK591_e_46-58.p65
52
03.10.7, 4:27 PM
Download from Www.Somanuals.com. All Manuals Search And Download.
MIDI
KEYBOARD CHANNEL (Default: 1)
NAVIGATE CHANNEL (Default: 4)
The keyboard channel is the channel used to send MIDI
messages from this keyboard to an external device. You can
specify one channel from 1 to 16 as the keyboard channel.
When MIDI messages are received from an external device
for play on this keyboard, the navigate channel is the channel
whose note data appears on the display. You can select one
channel from 1 to 8 as the navigate channel. Since this setting
lets you use the data on any channel of commercially available
MIDI software to light on the on-screen keyboard guide, you
can analyze how different parts of an arrangement are played.
1 Press the SETTING button until the KEYBOARD
CHANNEL screen appears.
1 Press the SETTING button until the NAVIGATE
y
CHANNEL screen appears.
2 Use the [+], [–], and the number buttons to change
the channel number.
Example: To specify channel 4
2 Use the [+], [–], and the number buttons [1]
y
through [8] to change the channel number.
Example: To specify channel 2
NOTE
• The navigate channel automatically changes to 1
whenever you turn MIDI IN CHORD JUDGE on.
704A-E-055A
E-53
CTK591_e_46-58.p65
53
03.10.7, 4:27 PM
Download from Www.Somanuals.com. All Manuals Search And Download.
MIDI
SETTING
TRACK 1
TRACK 2
Number buttons
[+] / [–]
MODE
To turn off specific sounds before playing back MIDI data
that is being received
<<Navigate channel on/off>>
NOTE
• MIDI IN CHORD JUDGE automatically turns off
whenever you change the navigate channel to any
channel besides 1.
While playing MIDI data, press the TRACK 2 button.
• This cuts the sound of the navigate channel, but on-screen
keyboard guide keys continue to light in accordance with
the channel’s data as it is received. Press TRACK 2 button
again to turn the channel back on.
LOCAL CONTROL (Default: On)
This setting determines whether or not the keyboard and
sound source of this keyboard are connected internally. When
recording to a computer or other external device connected
to this keyboard’s MIDI IN/OUT terminal, it helps if you
turn LOCAL CONTROL off.
<<Next lower channel from navigate channel on/off>>
While playing MIDI data, press the TRACK 1 button.
• This cuts the sound of the channel whose number is one
less than the navigate channel, but on-screen keyboard
guide keys continue to light in accordance with the
channel’s data as it is received. Press TRACK 1 button again
to turn the channel back on.
on: Anything played on the keyboard is sounded by the
internal sound source and simultaneously output as a
MIDI message from the MIDI OUT terminal.
oFF: Anything played on the keyboard is output as a MIDI
message from the MIDI OUT terminal, without being
sounded by the internal sound source. Turn LOCAL
CONTROL off whenever you are using the MIDI THRU
function of a computer or other external device. Also
note that the no sound is produced by the keyboard if
LOCAL CONTROL is turned off and no external device
is connected.
Example: If the navigate channel is channel 4, the above
operation turns off channel 3. If the navigate
channel is channel 1 or 2, the above operation turns
off channel 8.
MIDI IN CHORD JUDGE (Default: Off)
on: When a chord specification method is selected by the
MODE switch, chords are specified by the keyboard
channel note data input from the MIDI IN terminal.
1 Press the SETTING button until the LOCAL
oFF: MIDI IN CHORD JUDGE is turned off.
CONTROL screen appears.
Example: When LOCAL CONTROL is on
1 Press the SETTING button until the MIDI IN
CHORD JUDGE screen appears.
2 Use the [+] and [–] or [0] and [1] buttons to turn
the setting on and off.
Example: To turn LOCAL CONTROL off
2 Use the [+] and [–] or [0] and [1] buttons to turn
the setting on and off.
Example: To turn MIDI IN CHORD JUDGE on
E-54
704A-E-056A
CTK591_e_46-58.p65
54
03.10.7, 4:27 PM
Download from Www.Somanuals.com. All Manuals Search And Download.
MIDI
ASSIGNABLE JACK (Default: SUS)
SUS(sustain): Specifies a sustain*1 effect when the pedal is
MIDI THRU MIDI IN
depressed.
SoS (sostenuto): Specifies a sostenuto*2 effect when the
MIDI OUT
MIDI IN
pedal is depressed.
MIDI OUT
MIDI OUT
SFt (soft): Specifies reduction of the sound’s volume when
Sound Source
the pedal is depressed.
Sound Source
rHy (rhythm): Specifies START/STOP button operation
when the pedal is depressed.
LOCAL CONTROL On
LOCAL CONTROL Off
Notes played on the keyboard
are sounded by the internal
sound source and output as
MIDI messages from the MIDI
OUT terminal.
Notes played on the keyboard
are output as MIDI messages
from the MIDI OUT terminal, but
not sounded directly by the
internal sound source. The MIDI
THRU terminal of the connected
device can be used to return the
MIDI message and sound it on
this keyboard’s sound source.
1 Press the SETTING button until the ASSIGNABLE
JACK screen appears.
Example: When sustain is currently set
2 Use the [+] and [–] or [0], [1], [2], and [3] buttons
ACCOMP MIDI OUT (Default: Off)
on: Auto Accompaniment is played by the keyboard and
the corresponding MIDI message is output from the
MIDI OUT terminal.
to change the setting.
Example: To select rhythm
oFF: Auto Accompaniment MIDI messages are not output
from the MIDI OUT terminal.
*1 Sustain
With piano tones and other sounds that decay, the pedal acts
as a damper pedal, with sounds being sustained longer when
the pedal is depressed. With organ tones and other continuous
sounds, notes played on the keyboard continue to sound until
the pedal is released. In either case, the sustain effect is also
applied to any notes that are played while the pedal is
depressed.
1 Press the SETTING button until the ACCOMP MIDI
OUT screen appears.
Example: When ACCOMP MIDI OUT is off
p
*2 Sostenuto
This effect performs the same way as sustain, except that it is
applied only to notes that are sounding already when the
pedal is depressed. It does not affect notes that are played
after the pedal is depressed.
2 Use the [+] and [–] or [0] and [1] buttons to turn
the setting on and off.
Example: To turn ACCOMP MIDI OUT on
p
704A-E-057A
E-55
CTK591_e_46-58.p65
55
03.10.7, 4:27 PM
Download from Www.Somanuals.com. All Manuals Search And Download.
MIDI
SETTING
Number buttons
[+] / [–]
Messages
# When SUS is set
There is a wide variety of messages defined under the MIDI
standard, and this section details the particular messages that
can be sent and received by this keyboard. An asterisk is used
to mark messages that affect the entire keyboard. Messages
without an asterisk are those that affect only a particular
channel.
Pedal depressed
# When SoS is set
Pedal released
NOTE ON/OFF
This message sends data when a key is pressed (NOTE ON)
or released (NOTE OFF).
Pedal released
= Keyboard depressed.
= Sustained notes
Pedal depressed
A NOTE ON/OFF message include a note number (to indicate
note whose key is being pressed or released) and velocity
(keyboard pressure as a value from 1 to 127). NOTE ON
velocity is always used to determine the relative volume of
the note. This keyboard does not receive NOTE OFF velocity
data.
Whenever you press or release a key on this keyboard, the
corresponding NOTE ON or NOTE OFF message is sent from
the MIDI OUT terminal.
SOUND RANGE SHIFT (Default: On)
on: Shifts low range tones one octave lower and 020
GLOCKENSPIEL/095 PICCOLO one octave higher.
oFF: Plays low range tones and 020 GLOCKENSPIEL/095
PICCOLO at their normal levels.
Press the key
MIDI OUT Terminal
NOTE ON
• Note number (tone)
• Velocity (volume)
1 Press the SETTING button until the SOUND RANGE
SHIFT screen appears.
Release the key
MIDI OUT Terminal
NOTE OFF
• Note number (tone)
• Velocity (volume)
2 Use the [+] and [–] or [0] and [1] buttons to change
the setting.
Example: To turn SOUND RANGE SHIFT off
NOTE
• The pitch of a note depends on the tone that is being
used, as shown in the Note Table on pageA-1. Whenever
this keyboard receives a note number that is outside its
range for that tone, the same tone in the nearest
available octave is substituted.
E-56
704A-E-058A
CTK591_e_46-58.p65
56
03.10.7, 4:27 PM
Download from Www.Somanuals.com. All Manuals Search And Download.
MIDI
*1 The BANK SELECT setting of PROGRAM CHANGE can be used
to access any of this keyboard’s 255 tones when selecting tones on
this keyboard from an external machine.
PROGRAM CHANGE
This is the tone selection message. PROGRAM CHANGE can
contain tone data within the range of 0 to 127.
A PROGRAM CHANGE message is sent out through this
keyboard’s MIDI OUT terminal whenever you manually
change its tone number. Receipt of a PROGRAM CHANGE
message from an external machine changes the tone setting
of this keyboard.
Bank 0: 128 General MIDI tones (PROGRAM CHANGE 0 to 127)
Bank 1: 118 panel tones (PROGRAM CHANGE 0 to 117)
Bank 120: 9 drum sets
(PROGRAM CHANGE 0, 8, 16, 24, 25, 32, 40, 48 and 62)
Immediately prior to sending the PROGRAM CHANGE message,
send two successive CONTROL CHANGE messages containing
the following data.
CONTROL NUMBER= 0, CONTROL VALUE= <bank number>
CONTROL NUMBER= 32, CONTROL VALUE= 0
NOTE
• This keyboard supports 128 tones in the range 0 to 127.
However, Channel 10 is a percussion-only channel, and
Channels 0, 8, 16, 24, 25, 32, 40, 48, and 62 correspond
to the nine drum set sounds of this keyboard.
Example: To select tone number 96 (panel tone “FLUTE 1”)
from an external MIDI machine.
CONTROL NUMBER= 0,
CONTROL VALUE= 1 (bank number)
CONTROL NUMBER= 32, CONTROL VALUE= 0
PROGRAM CHANGE= 96
PITCH BEND
*2 RPN stands for Registered Parameter Number, which is a special
control change number used when combining multiple control
changes. The parameter being controlled is selected using the
control values of control numbers 100 and 101, and then settings
are made using the control values of DATA ENTRY (control
numbers 6 and 38).
This keyboard uses RPN to control this keyboard’s pitch bend sense
(pitch change width in accordance with bend data) from another
external MIDI device, transpose (this keyboard’s overall tuning
adjusted in halftone units), and tune (this keyboard’s overall fine
tuning).
This message carries pitch bend information for smoothly
sliding the pitch upwards or downwards during keyboard
play. This keyboard does not send pitch bend data, but it can
receive such data.
CONTROL CHANGE
This message adds effects such as vibrato and volume changes
applied during keyboard play. CONTROL CHANGE data
includes a control number (to identify the effect type) and a
control value (to specify the on/off status and depth of the
effect).
NOTE
• Sustain (control number 64), sostenuto (control number
66), and soft (control number 67) effects applied using
the foot pedal are also applied.
The following is a list of data that can be send or received
using CONTROL CHANGE.
Effect
BANK SELECT*1
# Modulation
# Volume
# Pan
Control Number
0, 32
1
7
10
# Expression
Hold1
11
64
Sostenuto
66
Soft Pedal
RPN*2
67
100 / 101
6 / 38
Data Entry
# indicates receive-only messages
704A-E-059A
E-57
CTK591_e_46-58.p65
57
03.10.7, 4:27 PM
Download from Www.Somanuals.com. All Manuals Search And Download.
MIDI
ALL SOUND OFF
This message forces all sound being produced over the
current channel to turn off, regardless of how the sound is
being produced.
ALL NOTES OFF
This message turns off all note data sent from an external
device and currently being sounded on the channel.
• Any notes being sustained using a sustain pedal or
sostenuto pedal continue to sound until the next pedal off.
RESET ALL CONTROLLERS
This messages initializes pitch bend and all other control
changes.
SYSTEM EXCLUSIVE*
This message is used to control system exclusives, which are
tone fine adjustments that are unique to a particular machine.
Originally, system exclusives were unique to a particular
model, but now there are also universal system exclusives
that are applicable to machines that are different models and
even produced by different manufacturers.
The following are the system exclusive messages supported
by this keyboard.
I GM SYSTEM ON ([F0][7E][7F][09][01][F7])
GM SYSTEM ON is used by an external machine to turn on
this keyboard’s GM system. GM stands for General MIDI.
• GM SYSTEM ON takes more time to process than other
messages, so when GM SYSTEM ON is stored in the
sequencer it can take more than 100msec until the next
message.
I GM SYSTEM OFF ([F0][7E][7F][09][02][F7])
GM SYSTEM OFF is used by an external machine to turn off
this keyboard’s GM system.
E-58
704A-E-060A
CTK591_e_46-58.p65
58
03.10.7, 4:27 PM
Download from Www.Somanuals.com. All Manuals Search And Download.
Troubleshooting
Problem
Possible Cause
Action
See page
No keyboard sound
1. Power supply problem.
1. Correctly attach the AC adaptor,
make sure that batteries poles
(+/–) are facing correctly, and
check to make sure that batteries
are not dead.
Pages
E-14,15
2. Power is not turned on.
2. Press the POWER button to turn
on power.
3. Use the VOLUME slider to
increase volume.
4. Normal play is not possible on
the accompaniment keyboard
while the MODE switch is set to
CASIO CHORD or FINGERED.
Change the MODE switch
setting to NORMAL.
Page E-19
Page E-19
Page E-35
3. Volume setting is too low.
4. The MODE switch is in the
CASIO CHORD or FINGERED
position.
5. LOCAL CONTROL is off.
6. MIDI data has changed the
VOLUME and EXPRESSION
settings to 0.
5. Turn on LOCAL CONTROL.
6. Adjust both parameters.
Page E-54
Page E-57
Any of the following symptoms
while using battery power.
• Dim power supply indicator
• Instrument does not turn on.
• Dim, difficult to read display
• Abnormally low speaker/
headphone volume
Low battery power
Replace the batteries with a set of
new ones or use the AC adaptor.
Pages
E-14, 15
• Distortion of sound output
• Occasional interruption of
sound when playing at high
volumes
• Sudden power failure when
playing at high volumes
• Dimming of the display when
playing at high volume
• Continued sound output even
after you release a key
• A totally different tone may
sound
• Abnormal rhythm pattern and
demo tune play
• Abnormally low microphone
volume
• Distortion of microphone input
• Dim power supply indicator
when a microphone is used
• Sudden power failure when
using the microphone
• Loss of power, sound distortion,
or low volume when playing
from a connected computer or
MIDI device
Auto Accompaniment does not
sound.
Accompaniment volume is set to
000.
Use the SETTING button to
increase the volume.
Page E-49
Page E-48
Sound output does not change
when key pressure is varied.
Touch response is turned off.
Press the SETTING button to turn
it on.
704A-E-061A
E-59
CTK591_e_59-63.p65
59
03.10.7, 4:27 PM
Download from Www.Somanuals.com. All Manuals Search And Download.
Troubleshooting
Problem
Possible Cause
Action
See page
On-screen keyboard guide keys
stay on.
Keyboard is waiting for play of
the correct note during Step 1 or
Step 2 play.
1. Press the lit key to continue with
Step 1 or Step 2 play.
2. Press the PLAY/STOP button to
quit Step 1 or Step 2 play.
Pages
E-28, 29
Pages
E-28, 29
When playing with another MIDI
instrument, keys or tunings do not
match.
Transpose or tuning is set to a
value other than 00.
Use the SETTING button to display
the applicable setting screens and
set both transpose and tuning to
00.
Pages
E-48, 50
Cannot
Accompaniment or rhythm.
record
Auto
Track other than Track 1 is selected
as the recording track.
Use the track select buttons to select
Track 1. (Track 2 is melody track.)
Page E-42
Page E-56
When playing General MIDI data
with a computer, playback notes
do not match those produced
when lit keys on the on-screen
keyboard guide are pressed.
Wrong SOUND RANGE SHIFT
setting
Use the SETTING button to display
the SOUND RANGE SHIFT screen
and correct the setting.
Playing on the keyboard produces
an unnatural sound when
connected to a computer.
The computer’s MIDI THRU
function is turned on.
Turn off the MIDI THRU function
on the computer or turn off LOCAL
CONTROL on the keyboard.
Page E-54
Page E-55
Cannot
record
chord
ACCOMP MIDI OUT is turned
off.
Turn on ACCOMP MIDI OUT.
accompaniment data on
computer.
a
Static noise when a microphone is
connected.
1. Use of a microphone that is a
different from the type that is
recommended.
2. Use of the microphone in the
vicinity of fluorescent lighting.
1. Use a full metal shielded Cannon
type microphone.
Page E-32
Page E-32
2. Move the microphone away from
source of the static.
No microphone sound
1. Microphone volume setting is
too low.
2. Microphone on/off switch is set
to OFF.
1. Increase the microphone volume
setting.
2. Change the microphone on/off
switch setting to ON.
Page E-32
Page E-32
E-60
704A-E-062A
CTK591_e_59-63.p65
60
03.10.7, 4:27 PM
Download from Www.Somanuals.com. All Manuals Search And Download.
Specifications
Model:
CTK-591/CTK-593
Keyboard:
Tones:
61 standard-size keys, 5 octaves (with touch response on/off)
255 (118 panel tones + 128 General MIDI tones + 9 drum sets); with layer and
split
Rhythm Instrument Tones:
Polyphony:
61
24 notes maximum (12 for certain tones)
Auto Accompaniment
Rhythm Patterns:
Tempo:
120
Variable (216 steps, = 40 to 255)
Chords:
Rhythm Controller:
3 fingering methods (CASIO CHORD, FINGERED, FULL RANGE CHORD)
START/STOP, INTRO, NORMAL/NORMAL FILL-IN, VARIATION/
VARIATION FILL-IN, SYNCHRO/ENDING
0 to 127 (128 steps)
Accomp Volume:
One Touch Presets:
Recalls settings for tone, tempo, layer, split, and accompaniment volume in
accordance with rhythm.
<Advanced 3-Step Lesson System>
3-step Lesson:
3 lessons (Step 1, 2, 3)
Repeat play of a single tune
Scoring 1, Scoring 2, Phrase Practice
On/Off
Playback:
Evaluation Mode:
Voice Fingering Guide:
Song Bank, Piano Bank
Number of Tunes:
Controllers:
100 (Song Bank/Sing Along: 50, Piano Bank: 50)
PLAY/STOP, PAUSE, FF, REW, LEFT/RIGHT
Musical Information Function:
Tone, Auto Accompaniment, Song Bank, Piano Bank, Sing Along numbers and
names; staff notation, tempo, metronome, measure and beat number, step lesson
display, chord name, fingering, pedal operation, Keyboard, Song Bank icon,
Piano Bank icon, Sing Along icon, Voice Fingering Guide, Evaluation Mode
Sing Along Mode
Number of Tunes:
Controllers:
Song Bank/Sing Along: 50
PLAY/STOP, KEY CONTROL (25 steps, –12 semitones to +12 semitones)
Metronome:
On/Off
1 to 6
Beat Specification:
Song Memory
Songs:
2
Recording Tracks:
Recording Method:
Memory Capacity:
2
Real-time
Approximately 5,100 notes (total for two songs)
MIDI:
16 multi-timbre receive, GM Level 1 standard
Other Functions
Transpose:
Tuning:
25 steps (–12 semitones to +12 semitones)
101 steps (A4 = approximatery 440Hz 50Cents)
Terminals
MIDI Terminals:
Assignable Jack:
Headphone/Output Terminal:
Output Impedance:
Output Voltage:
IN, OUT
Standard jack (sustain, sostenuto, soft, rhythm start/stop)
Stereo standard jack
100Ω
4V (RMS) MAX
Microphone In:
Standard jack (with microphone volume knob)
Input impedance: 3KΩ
Input sensitivity: 10mV
Power Jack:
9V DC
704A-E-063A
E-61
CTK591_e_59-63.p65
61
03.10.7, 4:27 PM
Download from Www.Somanuals.com. All Manuals Search And Download.
Specifications
Power Supply:
2-way
Batteries:
6 D-size batteries
Battery Life:
AC Adaptor:
Auto Power Off:
Approximately 6 hours continuous operation on manganese batteries
AD-5
Turns power off approximately 6 minutes after last key operation. Enabled
under batter power only, can be disabled manually.
Speaker Output:
Power Consumption:
Dimensions:
2.5W + 2.5W
9V
96.0 x 37.5 x 14.5 cm (37 13
Approximately 5.3 kg (11.7 lbs)(without batteries)
7.7W
/
16 x 14 3/ x 5 11
/16 inch)
4
Weight:
• Design and specifications are subject to change without notice.
E-62
704A-E-064A
CTK591_e_59-63.p65
62
03.10.7, 4:27 PM
Download from Www.Somanuals.com. All Manuals Search And Download.
Care of your keyboard
Avoid heat, humidity or direct sunlight.
Do not overexpose the instrument to direct sunlight, or place it near an air conditioner, or in any extremely hot place.
Do not use near a TV or radio.
This instrument can cause video or audio interference with TV and radio reception. If this happens, move the instrument away
from the TV or radio.
Do not use lacquer, thinner or similar chemicals for cleaning.
Clean the keyboard with a soft cloth dampened in a weak solution of water and a neutral detergent. Soak the cloth in the solution
and squeeze until it is almost dry.
Avoid use in areas subjected to temperature extremes.
Extremely high or low temperature can cause figures on the LCD screen to become dim and difficult to read. This condition
should correct itself when the keyboard is brought back to normal temperature.
NOTE
• You may notice lines in the finish of the case of this keyboard. These lines are a result of the molding process used to shape
the plastic of the case. They are not cracks or breaks in the plastic, and are no cause for concern.
704A-E-065A
E-63
CTK591_e_59-63.p65
63
03.10.7, 4:27 PM
Download from Www.Somanuals.com. All Manuals Search And Download.
Appendix/Apéndice
Note Table/Tabla de notas
(1): Tone number/Número de sonido
(2): Maximum polyphony/Polifonía máxima
(3): Range type/Tipo de gama
(1)
(2)
(3)
(1)
(2)
(3)
(1)
(2)
(3)
(1)
(2)
(3)
(1)
(2)
(3)
0
1
2
3
4
5
6
7
8
9
12
24
24
24
12
24
12
12
12
12
A
A
A
A
A
A
A
A
A
A
10
11
12
13
14
15
16
17
18
19
12
24
12
12
12
12
12
12
24
24
A
A
A
A
A
A
A
A
A
A
20
21
22
23
24
25
26
27
28
29
24
24
24
12
12
12
12
12
12
12
B
A
A
A
A
A
A
A
A
A
30
31
32
33
34
35
36
37
38
39
12
12
12
12
12
12
12
24
24
24
A
A
A
A
A
A
A
A
C
C
40
41
42
43
44
45
46
47
48
49
12
24
12
24
12
24
24
24
12
24
C
C
C
C
C
C
C
C
C
C
(1)
(2)
(3)
(1)
(2)
(3)
(1)
(2)
(3)
(1)
(2)
(3)
(1)
(2)
(3)
50
51
52
53
54
55
56
57
58
59
12
24
24
24
24
24
24
24
24
24
C
C
C
C
C
C
C
A
A
C
60
61
62
63
64
65
66
67
68
69
24
24
24
24
12
24
12
24
24
24
A
A
A
A
A
A
A
A
A
A
70
71
72
73
74
75
76
77
78
79
12
12
12
24
24
24
24
12
24
12
A
A
A
A
C
C
A
C
A
A
80
81
82
83
84
85
86
87
88
89
12
12
12
12
24
24
24
12
24
24
A
A
A
A
A
C
C
C
C
C
90
91
92
93
94
95
96
97
98
99
12
12
24
24
24
24
24
24
12
24
C
C
C
A
A
B
A
A
A
A
(1)
(2)
(3)
(1)
(2)
(3)
(1)
(2)
(3)
(1)
(2)
(3)
(1)
(2)
(3)
100
101
102
103
104
105
106
107
108
109
24
24
12
12
12
12
12
12
12
24
A
A
A
A
A
A
A
A
A
A
111
111
112
113
114
115
116
117
118
119
12
12
12
12
12
12
12
12
24
24
A
A
A
A
A
A
A
A
A
A
120
121
122
123
124
125
126
127
128
129
12
12
24
24
24
24
24
24
12
24
A
A
A
A
A
A
A
A
A
A
130
131
132
133
134
135
136
137
138
139
24
24
24
12
12
12
12
12
24
12
A
A
A
A
A
A
A
A
A
A
140
141
142
143
144
145
146
147
148
149
24
12
24
24
24
24
24
24
24
24
A
A
A
A
A
A
A
A
A
A
(1)
(2)
(3)
(1)
(2)
(3)
(1)
(2)
(3)
(1)
(2)
(3)
(1)
(2)
(3)
150
151
152
153
154
155
156
157
158
159
24
24
24
24
24
24
24
24
24
24
A
A
A
A
A
A
A
A
A
A
160
161
162
163
164
165
166
167
168
169
24
24
24
24
24
24
24
24
24
12
A
A
A
A
A
A
A
A
A
A
170
171
172
173
174
175
176
177
178
179
24
24
12
12
24
24
24
24
12
24
A
A
A
A
A
A
A
A
A
A
180
181
182
183
184
185
186
187
188
189
12
12
24
24
24
24
24
24
24
24
A
A
A
A
A
A
A
A
A
A
190
191
192
193
194
195
196
197
198
199
24
24
24
24
12
24
24
24
12
12
A
A
A
A
A
A
A
A
A
A
(1)
(2)
(3)
(1)
(2)
(3)
(1)
(2)
(3)
(1)
(2)
(3)
(1)
(2)
(3)
200
201
202
203
204
205
206
207
208
209
12
12
12
12
12
12
12
24
12
12
A
A
A
A
A
A
A
A
A
A
210
211
212
213
214
215
216
217
218
219
12
12
12
12
12
12
12
12
12
12
A
A
A
A
A
A
A
A
A
A
220
221
222
223
224
225
226
227
228
229
12
12
24
24
24
24
24
12
12
24
A
A
A
A
A
A
A
A
A
A
230
231
232
233
234
235
236
237
238
239
24
24
12
24
24
24
12
24
24
24
A
A
A
D
D
D
D
D
A
A
240
241
242
243
244
245
246
247
248
249
12
24
24
24
12
24
24
24
24
24
D
D
D
D
D
D
D
D
D
D
NOTE
(1)
(2)
(3)
• The meaning of each range type is described to the right.
250
251
252
253
254
24
24
24
24
24
D
D
D
D
D
NOTA
• El significado de cada tipo de gama se describe a la derecha.
704A-E-131A
A-1
CTK591_es_appendix.p65
1
03.10.7, 4:27 PM
Download from Www.Somanuals.com. All Manuals Search And Download.
Appendix/Apéndice
ꢋ
ꢋ
=
A
440Hz
ꢋ
ꢋ
ꢋ
ꢅ
ꢋ
ꢋ
ꢆ
ꢋ
ꢋ
-
Range Type
C 1
C0
C1
C2
C3
C4
C5
C6
C7 G7 C8
C9 G9
A
(Standard type)
(Tipo estándar)
B
“020 GLOCKENSPIEL”/
“095 PICCOLO”
“020 GLOCKENSPIEL”/
“095 PICCOLO”
C
Low pitch
instruments
Instrumentos de
altura tonal baja
D
No scale for tones.
Sin escala para los sonidos.
(Sound Effect)
(Efecto de sonido)
........Keyboard range (SOUND RANGE SHIFT turned on)
........Gama del teclado (SOUND RANGE SHIFT activados)
a
b
c
........Keyboard range (SOUND RANGE SHIFT turned off)
........Gama del teclado (SOUND RANGE SHIFT desactivados)
........Available range (using transpose or MIDI receive)
........Gama disponible (usando la transposición o recepción MIDI)
........Notes in these ranges are produced by playing the notes in range c that are in
the nearest octave as the result of transpose and MIDI data receive operations.
d
........Las notas en estas gamas se producen ejecutando las notas en la gama c que
se encuentre en la octava más cercana como resultado de las operaciones de
transposición y recepción de datos MIDI.
A-2
704A-E-132A
CTK591_es_appendix.p65
2
03.10.7, 4:27 PM
Download from Www.Somanuals.com. All Manuals Search And Download.
Appendix/Apéndice
a
í
L
n
ó
D
L
704A-E-133A
A-3
CTK591_es_appendix.p65
3
03.10.7, 4:27 PM
Download from Www.Somanuals.com. All Manuals Search And Download.
Appendix/Apéndice
A
N
N
A-4
704A-E-134A
CTK591_es_appendix.p65
4
03.10.7, 4:27 PM
Download from Www.Somanuals.com. All Manuals Search And Download.
Appendix/Apéndice
A
N
N
F
Cua
704A-E-135A
A-5
CTK591_es_appendix.p65
5
03.10.7, 4:27 PM
Download from Www.Somanuals.com. All Manuals Search And Download.
Appendix/Apéndice
Tone List
Lista de sonidos
ꢀ Panel Tones/Sonidos de panel
BASS
PIANO
049
050
051
052
053
054
055
056
ACOUSTIC BASS
RIDE BASS
FINGERED BASS
PICKED BASS
FRETLESS BASS
SLAP BASS
SAW.SYNTH-BASS
SQR SYNTH-BASS
000
001
002
003
004
005
006
007
008
009
010
011
012
013
014
015
016
017
018
STEREO PIANO
GRAND PIANO
BRIGHT PIANO
MELLOW PIANO
MODERN PIANO
DANCE PIANO
STRINGS PIANO
HONKY-TONK
OCTAVE PIANO
ELEC.GRAND PIANO
MODERN E.G.PIANO
ELEC.PIANO
STR/ORCHESTRA
057
058
059
060
061
VIOLIN
SLOW VIOLIN
CELLO
PIZZICATO STRINGS
HARP
CHORUSED EP
MODERN E.PIANO
SOFT E.PIANO
ENSEMBLE
062
063
064
065
066
067
068
069
070
071
072
STRINGS
SLOW STRINGS
CHAMBER
SYNTH-STRINGS 1
SYNTH-STRINGS 2
CHOIR AAHS
CHOIRS
E.PIANO PAD
HARPSICHORD
COUPLED HARPSICHORD
CLAVI
CHROMATIC PERC
019
020
021
022
CELESTA
GLOCKENSPIEL
VIBRAPHONE
MARIMBA
VOICE DOO
SYNTH-VOICE
SYNTH-VOICE PAD
ORCHESTRA HIT
ORGAN
023
024
025
026
027
028
029
030
031
032
033
034
035
036
037
DRAWBAR ORGAN 1
BRASS
DRAWBAR ORGAN 2
DRAWBAR ORGAN 3
PERC.ORGAN 1
PERC.ORGAN 2
ELEC.ORGAN 1
ELEC.ORGAN 2
JAZZ ORGAN
073
074
075
076
077
078
079
080
081
082
083
TRUMPET
TROMBONE
TUBA
MUTE TRUMPET
FRENCH HORN
BRASS
BRASS SECTION
BRASS SFZ
ANALOG SYNTH-BRASS
SYNTH-BRASS 1
SYNTH-BRASS 2
ROCK ORGAN
CHURCH ORGAN
CHAPEL ORGAN
ACCORDION
OCTAVE ACCORDION
BANDONEON
REED
084
085
086
087
088
089
090
091
092
093
094
SOPRANO SAX
ALTO SAX 1
ALTO SAX 2
BREATHY A.SAX
TENOR SAX 1
TENOR SAX 2
BREATHY T.SAX
T.SAXYS
HARMONICA
GUITAR
038
039
040
041
042
043
044
045
046
047
048
NYLON STR.GUITAR
STEEL STR.GUITAR
12 STR.GUITAR
JAZZ GUITAR
OCT JAZZ GUITAR
CLEAN GUITAR
ELEC.GUITAR
MUTE GUITAR
OVERDRIVE GT
DISTORTION GT
FEEDBACK GT
BARITONE SAX
OBOE
CLARINET
A-6
704A-E-136A
CTK591_es_appendix.p65
6
03.10.7, 4:27 PM
Download from Www.Somanuals.com. All Manuals Search And Download.
Appendix/Apéndice
PIPE
ꢀ GM Tones/Sonidos GM
095
096
097
098
099
100
101
PICCOLO
FLUTE 1
FLUTE 2
MELLOW FLUTE
RECORDER
PAN FLUTE
WHISTLE
PIANO
118
119
120
121
122
123
124
125
PIANO 1
PIANO 2
PIANO 3
HONKY-TONK GM
E.PIANO 1 GM
E.PIANO 2 GM
HARPSICHORD GM
CLAVI GM
SYNTH-LEAD
102
103
104
105
106
107
SQUARE LEAD
SAWTOOTH LEAD
SINE LEAD
CALLIOPE
VOICE LEAD
BASS+LEAD
CHROMATIC PERC
126
127
128
129
130
131
132
133
CELESTA GM
GLOCKENSPIEL OCT
MUSIC BOX
VIBRAPHONE GM
MARIMBA GM
XYLOPHONE
TUBULAR BELL
DULCIMER
SYNTH-PAD
108
109
110
111
112
113
114
115
116
117
FANTASY
WARM PAD
WARM VOX
POLYSYNTH
POLY SAW
BOWED PAD
HALO PAD
ATMOSPHERE
BRIGHTNESS
ECHO PAD
ORGAN
134
135
136
137
138
139
140
141
ORGAN 1
ORGAN 2
ORGAN 3
PIPE ORGAN
REED ORGAN
FRENCH ACCORDION
HARMONICA GM
BANDONEON GM
GUITAR
142
143
144
145
146
147
148
149
NYLON STR.GUITAR OCT
STEEL STR.GUITAR OCT
JAZZ GUITAR OCT
CLEAN GUITAR OCT
MUTE GUITAR OCT
OVERDRIVE GT OCT
DISTORTION GT OCT
GT HARMONICS
BASS
150
151
152
153
154
155
156
157
ACOUSTIC BASS OCT
FINGERED BASS OCT
PICKED BASS OCT
FRETLESS BASS OCT
SLAP BASS 1 OCT
SLAP BASS 2 OCT
SYNTH-BASS 1
SYNTH-BASS 2
STR/ORCHESTRA
158
159
160
161
162
163
164
165
VIOLIN GM
VIOLA
CELLO GM
CONTRABASS
TREMOLO STRINGS
PIZZICATO GM
HARP GM
TIMPANI
704A-E-137A
A-7
CTK591_es_appendix.p65
7
03.10.7, 4:27 PM
Download from Www.Somanuals.com. All Manuals Search And Download.
Appendix/Apéndice
ENSEMBLE
SYNTH-SFX
166
167
168
169
170
171
172
173
ORCHESTRA STRINGS 1
ORCHESTRA STRINGS 2
SAW.SYNTH-STRINGS 1
SAW.SYNTH-STRINGS 2
VOICE AHH
VOICE DOO GM
SYNTH-VOICE GM
ORCHESTRA HIT GM
214
215
216
217
218
219
220
221
RAIN DROP
SOUND TRACK
CRYSTAL
ATMOSPHERE PAD
BRIGHT PAD
GOBLINS
ECHOES
SF
BRASS
ETHNIC
174
175
176
177
178
179
180
181
TRUMPET GM
TROMBONE OCT
TUBA OCT
MUTE TRUMPET GM
FRENCH HORN OCT
BRASS GM
SYNTH-BRASS 1 GM
SYNTH-BRASS 2 GM
222
223
224
225
226
227
228
229
230
SITAR
BANJO
SHAMISEN
KOTO
THUMB PIANO
BAG PIPE
FIDDLE
SHANAI
TINKLE BELL
REED
PERCUSSIVE
182
183
184
185
186
187
188
189
SOPRANO SAX GM
ALTO SAX OCT
TENOR SAX OCT
BARITONE SAX OCT
OBOE GM
ENGLISH HORN
BASSOON
CLARINET GM
231
232
233
234
235
236
237
AGOGO
STEEL DRUMS
WOOD BLOCK
TAIKO
MELODIC TOM
SYNTH-DRUM
REVERSE CYMBAL
PIPE
SOUND EFFECTS
190
191
192
193
194
195
196
197
PICCOLO OCT
FLUTE GM
238
239
240
241
242
243
244
245
GT FRET NOISE
BREATH NOISE
SEASHORE
BIRD
TELEPHONE
HELICOPTER
APPLAUSE
GUNSHOT
RECORDER GM
PAN FLUTE GM
BOTTLE BLOW
SHAKUHACHI
WHISTLE GM
OCARINA
SYNTH-LEAD
198
199
200
201
202
203
204
205
SQUARE WAVE
SAWTOOTH WAVE
CALLIOPE LEAD
CHIFF LEAD
CHARANG
SOLO VOX
FIFTH LEAD
BASS LEAD
ꢀ Drum Sounds/Sonidos de batería
246
247
248
249
250
251
252
253
254
STANDARD SET
ROOM SET
POWER SET
ELECTRONIC SET
SYNTH SET
JAZZ SET
BRUSH SET
ORCHESTRA SET
VOICE SET
SYNTH-PAD
206
207
208
209
210
211
212
213
NEW AGE
WARM SYNTH
POLYSYNTH GM
SPACE CHOIR
BOWED GLASS
METAL PAD
HALO SYNTH
SWEEP PAD
A-8
704A-E-138A
CTK591_es_appendix.p65
8
03.10.7, 4:27 PM
Download from Www.Somanuals.com. All Manuals Search And Download.
Appendix/Apéndice
Rhythm List
Lista de ritmos
POPS I
048
049
CHICAGO BLUES
R&B
097
098
099
BALADI
ENKA
STR QUARTET
000
001
002
003
004
005
006
007
008
009
POP 1
WORLD POP
SOUL BALLAD 1
POP SHUFFLE
POP BALLAD
POP 2
BALLAD
FUSION SHUFFLE
POP 3
JAZZ/FUSION
FOR PIANO I
050
051
052
053
054
055
056
057
058
059
BIG BAND
JAZZ VOICES
SLOW SWING
SWING 1
SWING 2
FOX TROT
MODERN JAZZ
ACID JAZZ
LATIN FUSION
JAZZ WALTZ
100
101
102
103
104
105
106
107
108
109
PIANO BALLAD 1
PIANO BALLAD 2
PIANO BALLAD 3
EP BALLAD 1
EP BALLAD 2
BLUES BALLAD
MELLOW JAZZ
JAZZ COMBO
RAGTIME
SOUL BALLAD 2
POPS II
010
011
012
013
014
015
016
017
018
019
16 BEAT 1
16 BEAT 2
16 BEAT 3
8 BEAT 1
8 BEAT 2
8 BEAT 3
BOOGIE-WOOGIE
EUROPEAN
FOR PIANO II
060
061
062
063
064
065
066
067
068
069
POLKA 1
POLKA 2
MARCH 1
MARCH 2
SLOW WALTZ
VIENNESE WALTZ
WALTZ 1
FRENCH WALTZ
SERENADE
TANGO
110
111
112
113
114
115
116
117
118
119
ARPEGGIO 1
ARPEGGIO 2
ARPEGGIO 3
PIANO BALLAD 4
6/8 MARCH
MARCH 3
2 BEAT
WALTZ 2
WALTZ 3
WALTZ 4
POP 4
DANCE POP
POP FUSION
POP WALTZ
DANCE/FUNK
020
021
022
023
024
025
026
027
028
029
JUNGLE
RAVE
TECHNO
GROOVE SOUL
DISCO
EURO BEAT
RAP
TRANCE
FUNK
LATIN I
070
071
072
073
074
075
076
077
078
079
BOSSA NOVA 1
BOSSA NOVA 2
SAMBA 1
SAMBA 2
JAZZ SAMBA
MAMBO
RHUMBA
VERY FUNKY
CHA-CHA-CHA
MERENGUE
BOLERO
ROCK I
030
031
032
033
034
035
036
037
038
039
ROCK WALTZ
SLOW ROCK 1
SLOW ROCK 2
SOFT ROCK 1
SOFT ROCK 2
SOFT ROCK 3
FOLKIE POP
POP ROCK 1
60’S SOUL
LATIN II/VARIOUS I
080
081
082
083
084
085
086
087
088
089
SALSA
REGGAE
PUNTA
CUMBIA
PASODOBLE
RUMBA CATALANA
SEVILLANA
SKA
TEX-MEX
FOLKLORE
POP ROCK 2
ROCK II
040
041
042
043
044
045
046
047
ROCK 1
ROCK 2
POP ROCK 3
RIFF ROCK
HEAVY METAL
50’S ROCK
VARIOUS II
090
091
092
093
094
095
096
COUNTRY
BLUEGRASS
TOWNSHIP
FAST GOSPEL
SLOW GOSPEL
RAI
TWIST
NEW ORLNS R&R
ADANI
704A-E-139A
A-9
CTK591_es_appendix.p65
9
03.10.7, 4:27 PM
Download from Www.Somanuals.com. All Manuals Search And Download.
Appendix/Apéndice
Song List/Lista de canciones
Song Bank/Sing Along List
Lista del banco de canciones/cantando en conjunto
00
01
02
03
HERO (“SPIDER-MAN” THEME )
COMPLICATED
HERO
MY HEART WILL GO ON
(“TITANIC” THEME )
HAPPY BIRTHDAY TO YOU
WE WISH YOU A MERRY CHRISTMAS
JINGLE BELLS
SILENT NIGHT
JOY TO THE WORLD
O CHRISTMAS TREE
WHEN THE SAINTS GO MARCHING IN
GREENSLEEVES
04
05
06
07
08
09
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
31
32
33
34
35
36
37
38
39
40
41
42
43
44
45
46
47
48
49
AMAZING GRACE
AULD LANG SYNE
TWINKLE TWINKLE LITTLE STAR
UNDER THE SPREADING CHESTNUT TREE
SUMM SUMM SUMM
LONG LONG AGO
ACH DU LIEBER AUGUSTIN
SIPPIN’ CIDER THROUGH A STRAW
GRANDFATHER’S CLOCK
MICHAEL ROW THE BOAT ASHORE
DANNY BOY
ANNIE LAURIE
MY BONNIE
MY DARLING CLEMENTINE
J’AI PERDU LE DO DE MA CLARINETTE
I’VE BEEN WORKING ON THE RAILROAD
LITTLE BROWN JUG
AURA LEE
OH! SUSANNA
HOUSE OF THE RISING SUN
SHE WORE A YELLOW RIBBON
CAMPTOWN RACES
SWANEE RIVER (OLD FOLKS AT HOME)
YANKEE DOODLE
RED RIVER VALLEY
TURKEY IN THE STRAW
MY OLD KENTUCKY HOME
HOME ON THE RANGE
JAMAICA FAREWELL
LA CUCARACHA
ALOHA OE
SAKURA SAKURA
AJO MAMMA
LAPALOMA
SANTA LUCIA
TROIKA
SZLA DZIEWECZKA
WALTZING MATILDA
A-10
704A-E-140A
CTK591_es_appendix.p65
10
03.10.7, 4:27 PM
Download from Www.Somanuals.com. All Manuals Search And Download.
Appendix/Apéndice
Piano Bank List
Lista del banco de piano
ETUDES
CONCERT PIECES
00
01
02
03
04
05
06
07
08
09
10
11
12
13
14
15
16
17
MINUET (J.S.BACH)
GAVOTTE (GOSSEC)
ARABESQUE (BURGMÜLLER)
CHOPSTICKS
FRÖHLICHER LANDMANN
INVENTIONEN no.1
AVE MARIA (GOUNOD)
JESUS BLEIBET MEINE FREUDE
CANON (PACHELBEL)
SONATINA op.36 no.1 1st Mov.
SONATA op.13 “PATHÉTIQUE” 2nd Mov.
SONATA K.331 1st Mov.
PRELUDE op.28 no.7 (CHOPIN)
VON FREMDEN LÄNDERNUND MANSCHEN
JE TE VEUX
20
21
22
23
24
25
FÜR ELISE
TURKISH MARCH (MOZART)
THE ENTERTAINER
MAPLE LEAF RAG
GYMNOPÉDIES no.1
ETUDE op.10 no.3
“CHANSON DE L’ADIEU”
SONATA op.27 no.2
“MOONLIGHT” 1st Mov.
HUNGARIAN DANCES no.5
TRÄUMEREI
LA FILLE AUX CHEVEUX DE LIN
HUMORESKE (DVO ÁK)
PROMENADE FROM
“TABLEAUX D’UNE EXPOSITION”
MOMENTS MUSICAUX op.94 no.3
LE CYGNE FROM
“LE CARNAVAL DES ANIMAUX”
VALSE op.64 no.1 “PETIT CHIEN”
CHANSON DU TOREADOR FROM
“CARMEN”
26
27
28
29
30
31
RÊVERIE
ODE TO JOY
SERENADE FROM
“EINE KLEINE NACHTMUSIK”
GOING HOME FROM
32
33
34
35
18
19
“FROM THE NEW WORLD”
BEAUTIFUL DREAMER
36
37
LARGO (HÄNDEL)
WEDDING MARCH FROM
“MIDSUMMER NIGHT’S DREAM”
AMERICAN PATROL
CSIKOS POST
DOLLY’S DREAMING AND AWAKENING
LA CHEVALERESQUE
38
39
40
41
42
43
44
45
46
47
48
49
SONATA K.545 1st Mov.
LA PRIÈRE D’UNE VIERGE
TURKISH MARCH (BEETHOVEN)
NOCTURNE op.9 no.2 (CHOPIN)
LIEBESTRÄUME no.3
MARCHE MILITAIRE no.1
BLUMENLIED
GRANDE VALSE BRILLANTE op.18 no.1
704A-E-141A
A-11
CTK591_es_appendix.p65
11
03.10.7, 4:27 PM
Download from Www.Somanuals.com. All Manuals Search And Download.
ꢂꢂꢂꢂꢂꢂꢂꢂꢂꢂꢂꢂꢂꢂꢂꢂꢂꢂꢂ
ꢂꢂꢂꢂꢂꢂꢂꢂꢂꢂꢂꢂꢂꢂꢂꢂꢂꢂꢂ
ꢂꢂꢂꢂꢂꢂꢂꢂꢂꢂꢂꢂꢂꢂꢂꢂꢂꢂꢂ
ꢂꢂꢂꢂꢂꢂꢂꢂꢂꢂꢂꢂꢂꢂꢂꢂꢂꢂꢂ
ꢂꢂꢂꢂꢂꢂꢂꢂꢂꢂꢂꢂꢂꢂꢂꢂꢂꢂꢂ
ꢂꢂꢂꢂꢂꢂꢂꢂꢂꢂꢂꢂꢂꢂꢂꢂꢂꢂꢂ
ꢂꢂꢂꢂꢂꢂꢂꢂꢂꢂꢂꢂꢂꢂꢂꢂꢂꢂꢂ
ꢂꢂꢂꢂꢂꢂꢂꢂꢂꢂꢂꢂꢂꢂꢂꢂꢂꢂꢂ
ꢂꢂꢂꢂꢂꢂꢂꢂꢂꢂꢂꢂꢂꢂꢂꢂꢂꢂꢂ
ꢂꢂꢂꢂꢂꢂꢂꢂꢂꢂꢂꢂꢂꢂꢂꢂꢂꢂꢂ
ꢂꢂꢂꢂꢂꢂꢂꢂꢂꢂꢂꢂꢂꢂꢂꢂꢂꢂꢂ
704A-E-142A
CTK591_es_appendix.p65
12
03.10.7, 4:27 PM
Download from Www.Somanuals.com. All Manuals Search And Download.
ꢂꢂꢂꢂꢂꢂꢂꢂꢂꢂꢂꢂꢂꢂꢂꢂꢂꢂꢂ
ꢂꢂꢂꢂꢂꢂꢂꢂꢂꢂꢂꢂꢂꢂꢂꢂꢂꢂꢂ
ꢂꢂꢂꢂꢂꢂꢂꢂꢂꢂꢂꢂꢂꢂꢂꢂꢂꢂꢂ
ꢂꢂꢂꢂꢂꢂꢂꢂꢂꢂꢂꢂꢂꢂꢂꢂꢂꢂꢂ
ꢂꢂꢂꢂꢂꢂꢂꢂꢂꢂꢂꢂꢂꢂꢂꢂꢂꢂꢂ
ꢂꢂꢂꢂꢂꢂꢂꢂꢂꢂꢂꢂꢂꢂꢂꢂꢂꢂꢂ
ꢂꢂꢂꢂꢂꢂꢂꢂꢂꢂꢂꢂꢂꢂꢂꢂꢂꢂꢂ
ꢂꢂꢂꢂꢂꢂꢂꢂꢂꢂꢂꢂꢂꢂꢂꢂꢂꢂꢂ
ꢂꢂꢂꢂꢂꢂꢂꢂꢂꢂꢂꢂꢂꢂꢂꢂꢂꢂꢂ
ꢂꢂꢂꢂꢂꢂꢂꢂꢂꢂꢂꢂꢂꢂꢂꢂꢂꢂꢂ
ꢂꢂꢂꢂꢂꢂꢂꢂꢂꢂꢂꢂꢂꢂꢂꢂꢂꢂꢂ
704A-E-143A
CTK591_es_appendix.p65
13
03.10.7, 4:27 PM
Download from Www.Somanuals.com. All Manuals Search And Download.
ꢂꢂꢂꢂꢂꢂꢂꢂꢂꢂꢂꢂꢂꢂꢂꢂꢂꢂꢂ
ꢂꢂꢂꢂꢂꢂꢂꢂꢂꢂꢂꢂꢂꢂꢂꢂꢂꢂꢂ
ꢂꢂꢂꢂꢂꢂꢂꢂꢂꢂꢂꢂꢂꢂꢂꢂꢂꢂꢂ
ꢂꢂꢂꢂꢂꢂꢂꢂꢂꢂꢂꢂꢂꢂꢂꢂꢂꢂꢂ
ꢂꢂꢂꢂꢂꢂꢂꢂꢂꢂꢂꢂꢂꢂꢂꢂꢂꢂꢂ
ꢂꢂꢂꢂꢂꢂꢂꢂꢂꢂꢂꢂꢂꢂꢂꢂꢂꢂꢂ
ꢂꢂꢂꢂꢂꢂꢂꢂꢂꢂꢂꢂꢂꢂꢂꢂꢂꢂꢂ
ꢂꢂꢂꢂꢂꢂꢂꢂꢂꢂꢂꢂꢂꢂꢂꢂꢂꢂꢂ
ꢂꢂꢂꢂꢂꢂꢂꢂꢂꢂꢂꢂꢂꢂꢂꢂꢂꢂꢂ
ꢂꢂꢂꢂꢂꢂꢂꢂꢂꢂꢂꢂꢂꢂꢂꢂꢂꢂꢂ
ꢂꢂꢂꢂꢂꢂꢂꢂꢂꢂꢂꢂꢂꢂꢂꢂꢂꢂꢂ
704A-E-144A
CTK591_es_appendix.p65
14
03.10.7, 4:27 PM
Download from Www.Somanuals.com. All Manuals Search And Download.
ꢂꢂꢂꢂꢂꢂꢂꢂꢂꢂꢂꢂꢂꢂꢂꢂꢂꢂꢂ
ꢂꢂꢂꢂꢂꢂꢂꢂꢂꢂꢂꢂꢂꢂꢂꢂꢂꢂꢂ
ꢂꢂꢂꢂꢂꢂꢂꢂꢂꢂꢂꢂꢂꢂꢂꢂꢂꢂꢂ
ꢂꢂꢂꢂꢂꢂꢂꢂꢂꢂꢂꢂꢂꢂꢂꢂꢂꢂꢂ
ꢂꢂꢂꢂꢂꢂꢂꢂꢂꢂꢂꢂꢂꢂꢂꢂꢂꢂꢂ
ꢂꢂꢂꢂꢂꢂꢂꢂꢂꢂꢂꢂꢂꢂꢂꢂꢂꢂꢂ
ꢂꢂꢂꢂꢂꢂꢂꢂꢂꢂꢂꢂꢂꢂꢂꢂꢂꢂꢂ
ꢂꢂꢂꢂꢂꢂꢂꢂꢂꢂꢂꢂꢂꢂꢂꢂꢂꢂꢂ
ꢂꢂꢂꢂꢂꢂꢂꢂꢂꢂꢂꢂꢂꢂꢂꢂꢂꢂꢂ
ꢂꢂꢂꢂꢂꢂꢂꢂꢂꢂꢂꢂꢂꢂꢂꢂꢂꢂꢂ
ꢂꢂꢂꢂꢂꢂꢂꢂꢂꢂꢂꢂꢂꢂꢂꢂꢂꢂꢂ
704A-E-145A
CTK591_es_appendix.p65
15
03.10.7, 4:27 PM
Download from Www.Somanuals.com. All Manuals Search And Download.
704A-E-146A
CTK591_es_MIDI Chart.p65
2
03.10.7, 4:27 PM
Download from Www.Somanuals.com. All Manuals Search And Download.
704A-E-147A
CTK591_es_MIDI Chart.p65
3
03.10.7, 4:27 PM
Download from Www.Somanuals.com. All Manuals Search And Download.
This recycle mark indicates that the packaging conforms to
the environmental protection legislation in Germany.
Esta marca de reciclaje indica que el empaquetado se
ajusta a la legislación de protección ambiental en Alemania.
CASIO COMPUTER CO.,LTD.
6-2, Hon-machi 1-chome
Shibuya-ku, Tokyo 151-8543, Japan
C
MA0302-A Printed in China
CTK591/593-ES-1
CTK591_es_Cover.p65
2
03.10.7, 4:27 PM
Download from Www.Somanuals.com. All Manuals Search And Download.
|