ES
USER’S GUIDE
GUÍA DEL USUARIO
Please keep all information for future reference.
Guarde toda información para tener como referencia futura.
Safety Precautions
Before trying to use the piano, be sure to read
the separate “Safety Precautions”.
Precauciones de seguridad
Antes de intentar usar el piano, asegúrese de
leer las “Precauciones de seguridad” separadas.
AP220ES1B
Download from Www.Somanuals.com. All Manuals Search And Download.
Contents
Assembling the Stand...............................................................................................E-28
Unpacking................................................................. E-28
To connect the pedal cord.........................................E-30
To assemble the stand ............................................. E-28
To install the music stand..........................................E-30
n
General Guide ................................... E-2
Configuring Settings
FUNCTION Button...................................................... E-3
with the Keyboard........................... E-19
Saving Settings and Using Operation Lock ................ E-3
To configure settings with the keyboard....................E-19
Keyboard Keys Used for Configuring Settings..........E-20
Power Outlet...................................... E-4
Parameter List...........................................................E-21
Reverb ...................................................................E-21
Chorus ...................................................................E-21
Tone selection .......................................................E-21
Brilliance (BRILLIANCE)........................................E-21
Layer balance ........................................................E-21
Tempo (TEMPO) ...................................................E-21
Song select (SONG SELECT)...............................E-21
Song volume (SONG VOLUME)............................E-21
Metronome volume (METRONOME VOLUME).....E-21
Metronome beat (METRONOME BEAT)...............E-21
Keyboard key (Transpose) ....................................E-22
Keyboard tuning (Tuning) ......................................E-22
Octave shift............................................................E-22
Temperament (TEMPERAMENT) ........................E-22
Temperament select
(TEMPERAMENT SELECT)..................................E-22
Temperament Base note (BASE NOTE) ...............E-22
Touch response (TOUCH RESPONSE)................E-22
USB device mode (USB DEVICE MODE).............E-23
Send channel.........................................................E-23
Local control ..........................................................E-23
Operation tone.......................................................E-23
Back up..................................................................E-23
Operation lock........................................................E-23
Using an AC Adaptor.................................................. E-4
Connections...................................... E-6
Connecting Headphones ............................................ E-6
Connecting Audio Equipment or an Amplifier............. E-6
Bundled and Optional Accessories............................. E-6
Playing with Different Tones ........... E-7
Selecting and Playing a Tone..................................... E-7
To adjust the brilliance of a tone................................. E-8
Layering Two Tones ................................................... E-9
Using Effects............................................................. E-10
Using the Digital Piano’s Pedals............................... E-10
Using the Metronome ............................................... E-11
Playing a Piano Duet ................................................ E-12
Playing Back Built-in Songs.......... E-13
Playing Back All of the Built-in Songs....................... E-13
Playing Back a Specific Music Library Song............. E-13
Practicing with a Music Library Song........................ E-14
Recording and Play Back............... E-15
Connecting to a Computer............. E-24
Tracks....................................................................... E-15
Minimum Computer System Requirements ..............E-24
Connecting the Digital Piano to Your Computer .......E-24
Using MIDI ................................................................E-25
Transferring Song Data with a Computer..................E-25
To record to a specific track of a song...................... E-16
To record to one track of a song while listening to
the playback of the other track.................................. E-17
Playing Back from Digital Piano Memory.................. E-17
Deleting Recorded Data ........................................... E-18
Reference......................................... E-31
Troubleshooting ........................................................E-31
Product Specifications...............................................E-32
Operating Precautions ..............................................E-33
Appendix............................................A-1
Tone List .....................................................................A-1
Song List .....................................................................A-1
MIDI Implementation Chart
Company and product names used in this manual may
be registered trademarks of others.
E-1
Download from Www.Somanuals.com. All Manuals Search And Download.
General Guide
Bottom
1
Front
Rear
2
3
4
Front
5
6
bn
7
8
9
bk
bl
bm
bo
E-2
Download from Www.Somanuals.com. All Manuals Search And Download.
General Guide
*CAUTION
• Make sure that the cover is fully open whenever you are playing on the keyboard. A partially open cover can
suddenly close unexpectedly and pinch your fingers.
NOTE
• The names shown here are always indicated in bold when they appear within the text of this manual.
1 PHONES jacks
2 DC 12V terminal
3 USB port
8 RECORDER (L) button
9 METRONOME (R) button
bk GRAND PIANO (MODERN) button
bl GRAND PIANO (CLASSIC) button
bm ELEC PIANO button
E
4 Pedal connector
5 VOLUME controller
6 FUNCTION button
7 SONG a button
bn Power lamp
bo POWER button
FUNCTION Button
The FUNCTION button is used when configuring a variety of different digital piano settings. The following are
FUNCTION button basics.
z To change a setting, hold down the FUNCTION button as you press the
keyboard key that is assigned the setting you want to select.
An operation confirmation tone will sound whenever you press a
keyboard key to configure a setting.
Example: “To select a tone” on page E-7
NOTE
• For details about operations and settings, see “Configuring Settings with
the Keyboard” on page E-19.
z The following table shows how pressing the FUNCTION button changes the operation of certain buttons.
This button:
SONG a
RECORDER
METRONOME
MODERN
Does this while FUNCTION button is depressed:
Starts and stops demo tune play.
Selects the left-hand part.
Selects the right-hand part.
Toggles Reverb on (button lamp lit) and off (lamp unlit).
Toggles Chorus on (button lamp lit) and off (lamp unlit).
Toggles Duet on (button lamp lit) and off (lamp unlit).
CLASSIC
ELEC PIANO
Saving Settings and Using Operation Lock
Your digital piano lets you save its current settings and lock its buttons to protect against operation errors. For
details, see “Parameter List” on pages E-21 - E-23.
E-3
Download from Www.Somanuals.com. All Manuals Search And Download.
Power Outlet
Your digital piano runs on standard household power.
Be sure to turn off power whenever you are not using
the digital piano.
* Using the Clip
■ To fasten the clip
As shown in the illustration, press down on (a) to force
the tip of the clip into the slot. Press down until you
hear the clip click securely into place.
Using an AC Adaptor
Slot
Use only the AC adaptor (JEITA Standard, with unified
polarity plug) that comes with this digital piano. Use of
a different type of AC adaptor can cause malfunction
of the digital piano.
Tip
Specified AC Adaptor: AD-A12150LW
¨á©
• Secure the AC adaptor cord with the clip you affixed
next to the power terminal (page E-30).
■ To release the clip
As shown in the illustration, press (b) in the direction
indicated by the arrow.
Bottom
DC 12V terminal
AC adaptor
AD-A12150LW
¨â©
Clip
Note the following important precautions to avoid
damage to the power cord.
Household power
During Use
• Never pull on the cord with excessive force.
• Never repeatedly pull on the cord.
• Never twist the cord at the base of the plug or
connector.
• The power cord should not be stretched tight while
it is in use.
During Movement
• Before moving the digital piano, be sure to unplug
the AC adaptor from the power outlet.
During Storage
• Loop and bundle the power cord, but never wind it
around the AC adaptor.
IMPORTANT!
• Never connect the AC adaptor (JEITA Standard,
with unified polarity plug) that comes with this digital
piano to any other device besides this piano. Doing
so creates the risk of malfunction.
• Make sure the digital piano is turned off before
plugging in or unplugging the AC adaptor.
• The AC adaptor will become warm to the touch after
very long use. This is normal and does not indicate
malfunction.
E-4
Download from Www.Somanuals.com. All Manuals Search And Download.
Power Outlet
AC Plug Configurations
Depending on the geographic area, your digital piano
may come with a second AC plug. Use the AC plug
that matches the configuration of the wall outlet in
your area.
The AC adaptor is shipped from the factory with one of
the AC plugs shown below installed.
E
■ To change the AC plug
Perform the following steps when you need to change
the AC plug that is installed on the AC adaptor.
1.
Slide the plug in the
direction of the arrow in
Figure 1, and remove it
from the AC adaptor.
Figure 1
2.
Align the plug that
matches the power outlet
of your area with the AC
adaptor slots. Slide it in
place in the direction of
the arrow shown in
Figure 2.
Figure 2
3.
Press the part indicated
by the arrow in Figure 3
until the plug clicks
securely into place.
Figure 3
IMPORTANT!
• Should the AC plug come off of
the AC adaptor, slide it back on
as shown in the illustration. Slide
the AC plug along the rails on the
AC adaptor as far as it will go,
until it locks securely in place.
E-5
Download from Www.Somanuals.com. All Manuals Search And Download.
Connections
To either of the digital piano’s PHONES jack
IMPORTANT!
Pin plug
Audio amplifier AUX IN jack, etc.
• Whenever connecting something to the digital piano,
first use the VOLUME controller to set the volume to
a low level. After connecting, you can adjust the
volume to the level you want.
RIGHT (Red)
LEFT (White)
Stereo standard plug
Pin plug (white)
Guitar amplifier
Keyboard amplifier, etc.
INPUT 1
INPUT 2
Connecting Headphones
Pin plug (red)
Pin jack
Standard plug
Bottom
PHONES jacks
Connecting Audio Equipment (Figure 1)
Use commercially available connecting cords
(Standard Plug × 1, Pin Plugs × 2) to connect as shown
in Figure 1. Make sure that the end of the cord that
you connect to the digital piano is a stereo standard
plug. A monaural standard plug will result in output of
only one of the two stereo channels. Normally, you
should set the input selector of the audio equipment to
the terminal where the digital piano is connected (AUX
IN, etc.) Adjust volume using the digital piano’s
VOLUME controller.
Stereo standard plug
Connect commercially available headphones to the
PHONES jacks. Connecting headphones to either of
the PHONES jack cuts off output to the speakers,
which means you can practice even late at night
without bothering others. To protect your hearing,
make sure that you do not set the volume level too high
when using headphones.
Connecting a Music Amplifier (Figure 2)
Connect the connecting cord* to one of the types of
amplifiers shown in Figure 2.
Adjust volume using the digital piano’s VOLUME
controller.
* Digital Piano: Stereo standard plug
Amplifier
: Inputs signals for the left and right
channels. Not connecting either plug
will result in output of only one of the
two stereo channels.
NOTE
• Be sure to push the headphones plug into the
PHONES jacks as far as it will go. If you don’t, you
may hear sound from only one side of the
headphones.
• If the plug of the headphones you are using does not
match the PHONES jacks, use the applicable
commercially available adaptor plug.
Bundled and Optional
Accessories
• If you are using headphones that require an adaptor
plug, make sure you do not leave the adaptor
plugged in when you unplug the headphones. If you
do, nothing will sound from the speakers when you
play.
Use only accessories that are specified for use with this
digital piano.
Use of unauthorized accessories creates the risk of fire,
electric shock, and personal injury.
NOTE
Connecting Audio Equipment
or an Amplifier
• You can get information about accessories that are
sold separately for this product from the CASIO
catalog available from your retailer, and from the
CASIO website at the following URL.
You can connect audio equipment or a music amplifier
to the digital piano and then play through external
speakers for more powerful volume and better sound
quality.
E-6
Download from Www.Somanuals.com. All Manuals Search And Download.
Playing with Different Tones
VOLUME
FUNCTION
SONG a
E
POWER
METRONOME
GRAND PIANO
ELEC PIANO
Selecting and Playing a Tone
The piano comes with 16 built-in tones.
• The names of the tones are marked above the keyboard keys to which they are assigned.
To select a tone
1.
Press the POWER button.
IMPORTANT!
• When you turn on the digital piano, it performs a power up operation in order to initialize its system. During system
initialization the tone button lamps cycle on and off in the sequence for about seven seconds to let you know that
system initialization is in progress.
2.
Select the tone you want.
z To select GRAND PIANO (MODERN or
z To select one of the other tones
CLASSIC) or ELEC PIANO
• While holding down the FUNCTION button,
press the keyboard key that corresponds to the
tone you want to select.
• Press one of the GRAND PIANO buttons
(MODERN or CLASSIC) or the ELEC PIANO
button to select the one you want.
• The button lamp of the selected tone will light.
E-7
Download from Www.Somanuals.com. All Manuals Search And Download.
Playing with Different Tones
3.
Use the VOLUME controller to adjust the
volume.
To adjust the brilliance of a
tone
NOTE
1.
While holding down the FUNCTION button,
use the BRILLIANCE keys to specify a
brilliance value in the range of –3 to 0 to 3.
• GRAND PIANO tones (MODERN, CLASSIC)
Your digital piano has a total of 16 built-in tones.
The MODERN and CLASSIC tones are stereo
sampled tones that can be selected using the
GRAND PIANO buttons. Try using the GRAND
PIANO tones to familiarize yourself with their
distinctive sounds and characteristics.
Tone Name
Characteristics
MODERN
This tone provides a bright grand piano
sound. The volume and timbre of this
tone is quick to respond to different
keyboard pressures, and it has
relatively strong reverb. This tone is a
good choice for dynamic and lively
performances.
CLASSIC
This is a natural piano tone that closely
resembles the sound of an acoustic
grand piano. Reverb and other effects
are kept to a minimum in order to
enhance the impact of piano pedals
operations (acoustic resonance), for
musically delicate expressions. This
tone is a good choice for lesson and
practice sessions.
Press this keyboard
For this type of sound:
key:
Mellower and softer
Brighter and harder
T
S
• The GRAND PIANO tone (VARIATION) is best for
playing along with an accompaniment.
NOTE
• To return a tone to its initial default setting “0”,
press T and S at the same time.
Bass Tones (BASS 1, BASS 2)
Selecting either of the two BASS (LOWER) tones (1 or
2) in step 2 of the above procedure will assign the
selected bass tone to the low range (left side) of the
keyboard. The high range (right side) will be assigned
the tone that was selected when you pressed the
BASS 1 or BASS 2 key.
• BASS 1 and BASS 2 let you effectively split the
keyboard between two different tones.
Split Point
Low Range
BASS 1
High Range
PIPE ORGAN
(Currently selected tone.)
NOTE
• To return the keyboard to a single tone, select any
tone other than BASS 1 or BASS 2.
• You cannot select BASS 1 or BASS 2 when recording
to Track 2.
E-8
Download from Www.Somanuals.com. All Manuals Search And Download.
Playing with Different Tones
To adjust the volume balance between
two layered tones
Layering Two Tones
Use the following procedure to layer two tones, so they
sound at the same time.
When specifying two tones for layering, first tone you
select will be the main tone, while the second tone will
be the layered tone.
1.
While holding down the FUNCTION button,
use the keyboard keys shown below to adjust
the volume of the layered tones.
n
1.
While holding down the FUNCTION button,
hold down the keyboard key for the main tone
as you press the keyboard key for the layered
tone.
Example:To layer HARPSICHORD and STRINGS 1
C1
C2
C3
C4
C5
C6
C7
C8
Initial default (Center)
Volume of the layered tone
(Second tone you selected)
Volume of the main tone
(First tone you selected)
• To return the volume setting to its initial default, hold
down the FUNCTION button and press both of the
keys at the same time.
HARPSICHORD
STRINGS 1
2.
To unlayer the keyboard, select another tone
by pressing the GRAND PIANO button or by
using the procedure under “Selecting and
Playing a Tone” (page E-7).
NOTE
• You also can layer piano tones by holding down one
of the GRAND PIANO buttons (MODERN or
CLASSIC) as you press the ELEC PIANO button.
• You cannot layer the BASS 1 or BASS 2 tone with
another tone.
• You cannot perform the layer operation when
recording to Track 2.
E-9
Download from Www.Somanuals.com. All Manuals Search And Download.
Playing with Different Tones
■ About DSP
Using Effects
Reverb : Makes your notes resonate.
DSP makes it possible to digitally produce complex
acoustic effects. The DSP is assigned to each tone
whenever you turn on digital piano power.
Chorus: Adds more breadth to your notes.
To turn reverb on and off
Using the Digital Piano’s
Pedals
1.
While holding down the FUNCTION button,
press the MODERN button to toggle reverb
on (lamp lit) and off (lamp unlit).
Your digital piano comes equipped with three pedals:
damper, soft, and sostenuto
To turn chorus on and off
1.
While holding down the FUNCTION button,
press the CLASSIC button to toggle chorus
on (lamp lit) and off (lamp unlit).
Soft pedal
Damper pedal
Sostenuto pedal
To configure reverb and chorus effect
settings
Pedal Functions
z Damper Pedal
1.
While holding down the FUNCTION button,
press one of the Reverb or Chorus keyboard
keys.
Pressing the damper pedal while playing will cause the
notes you play to reverberate for a very long time.
• When a GRAND PIANO tone (MODERN, CLASSIC,
VARIATION) is selected as the tone, pressing this
pedal will cause notes to reverberate (with acoustic
resonance) just like the damper pedal on an acoustic
grand piano.
z Soft Pedal
1
2
3
4
1
2
3
4
Pressing this pedal while playing suppresses notes
played on the keyboard after the pedal was pressed,
and makes them sound softer.
Reverb
Chorus
z Sostenuto Pedal
Only the notes of the keys that are depressed when this
pedal is pressed are sustained until the pedal is
released.
Example:Selecting Reverb 4
• Reverb Value
To do this:
Select this setting:
Turn on reverb
1: Room
2: Small Hall
3: Large Hall
4: Stadium
• Chorus Value
To do this:
Select this setting:
Turn on chorus
1: Light Chorus
2: Medium Chorus
3: Deep Chorus
4: Flanger (Whooshing effect)
E-10
Download from Www.Somanuals.com. All Manuals Search And Download.
Playing with Different Tones
4.
Press the METRONOME button or SONG
a button to turn off the metronome.
Using the Metronome
1.
Press the METRONOME button.
• This starts the metronome.
NOTE
• To return the tempo setting to the default tempo of
the currently selected Music Library tune, press the
+ and – keys at the same time in step 3. Pressing +
and – while recording will return the tempo value to
120.
• The lamp above the SONG a button flash in time
with the metronome beat.
E
2.
To change the beat, hold down the
FUNCTION button as you press one of the
METRONOME BEAT keys to select a beat
setting.
To adjust the metronome volume
NOTE
• You can perform the following procedure at any
time, regardless of whether or not the metronome is
sounding.
1.
While holding down the FUNCTION button,
use the METRONOME VOLUME keys to
specify a volume value in the range of 0 to 42.
• For details about using the keyboard keys for
settings, see “Keyboard Keys Used for Configuring
Settings” on page E-20.
• Each press of the T orS key raises or lowers the
metronome volume value by 1.
• You can specify beats per measure value of 0, 2, 3, 4,
5, or 6. Specifying 0 as the setting plays a straight
click, without any chime. This setting lets you
practice with a steady beat.
NOTE
• To return to the initial default setting, press T and
S at the same time.
3.
While holding down the FUNCTION button,
use the TEMPO keys to specify a tempo
value in the range of 20 to 255 beats per
minute.
• Each press of the + or – key raises or lowers the
tempo value by 1.
• You can use the value input keys (0 to 9) to enter a
specific three-digit. Be sure to input all three digits.
Example:To enter “96”, press keys 0, 9, 6.
E-11
Download from Www.Somanuals.com. All Manuals Search And Download.
Playing with Different Tones
Changing the Octaves of the duet
keyboards
Playing a Piano Duet
You can use the Duet Mode to split the piano’s
keyboard in the center so two people can play a duet.
You can change the ranges of the left and right
keyboards in octave units from their initial default
settings. This comes in handy, for example, if the initial
default range is not enough when one person is
playing the left hand part and another person is
playing the right hand part.
Keyboard
Split point
Left keyboard
Right keyboard
1.
While holding down the FUNCTION and
ELEC PIANO buttons, press the keyboard
C key that you want located at C4 (middle C)
of the left keyboard.
C3
C4
C5
C6
C3
C4
C5
C6
(middle C)
(middle C)
The left and right side keyboards have virtually the
same range. The left pedal operates as the left side
damper pedal, while the right pedal is the right side
damper pedal.
Pedals
Left side damper pedal
Right side damper pedal
Left and right side damper pedal
The Duet Mode is the perfect way to conduct lessons,
with the teacher playing on the left side as the student
playing the same song on the right side.
Example:Press the keyboard key of the leftmost C (C4)
will assign the range shown below.
Left keyboard
Right keyboard
1.
Select the piano tone you want to use for the
duet.
Example: GRAND PIANO (MODERN)
C4
(Pressed key)
C5
C6
C7
C3
C4
C5
C6
2.
While holding down the FUNCTION button,
press the ELEC PIANO button to toggle duet
on (lamp lit) and off (lamp unlit).
1 octave higher than initial
setting
Unchanged
2.
While holding down the FUNCTION and
ELEC PIANO buttons, press the keyboard
C key that you want located at C4 (middle C)
of the right keyboard.
IMPORTANT!
• You cannot use the Duet Mode while recording
(page E-15).
NOTE
• You can return the keyboards to their initial default
ranges by exiting and then re-entering the Duet
Mode.
E-12
Download from Www.Somanuals.com. All Manuals Search And Download.
Playing Back Built-in Songs
FUNCTION
SONG a
E
RECORDER
METRONOME
Playing Back All of the Built-in
Songs
Playing Back a Specific Music
Library Song
Your digital piano comes with a Music Library of 60
built-in tunes. You can play all 60 tunes in sequence,
from beginning to end.
The Music Library includes both built-in songs (01 to
60), plus one song (61) that have been saved to digital
piano memory from a computer*. You can use the
procedure below to select one of these songs and play it
back.
* You can download music data from the Internet and
then transfer it from your computer to digital piano
memory. See “Transferring Song Data with a
Computer” on page E-25 for more information.
1.
While holding down the FUNCTION button,
press the SONG a button.
• This will start repeat demo playback of the built-in
songs in sequence, from 01 through 60.
• You can play along with a song on the keyboard as it
is playing. The tone assigned to the keyboard is the
one that is preset for the song that is playing.
• You can select a specific song during demo playback.
For details, see step 2 under “Playing Back a Specific
Music Library Song”.
1.
2.
Find the song number of the song you want to
play in the song list on page A-1.
To change to another song, hold down the
FUNCTION button as you use the SONG
SELECT keys to specify a song number.
2.
Press the SONG a button again to stop
built-in song play.
NOTE
• The tune selection and playback stop operations
described above are the only operations that are
possible during demo tune play.
• Each press of the + or – key raises or lowers the song
number by 1.
• You can use the value input keys (0 to 9) to enter a
specific two-digit song number. Be sure to input both
digits.
Example:To select song 08, enter 0 and then 8.
3.
Press the SONG a button.
• This starts the playback of the song.
E-13
Download from Www.Somanuals.com. All Manuals Search And Download.
Playing Back Built-in Songs
4.
To stop playback, press the SONG a
button again.
• Playback will stop automatically when the end of the
song is reached.
NOTE
• Pressing the + and – keys at the same time will select
song number 01.
• You also can adjust the playback tempo and volume
of the song. See “Configuring Settings with the
Keyboard” on page E-19 for more information.
Practicing with a Music Library
Song
You can turn off the left hand part or right hand part of
a song and play along on the piano.
NOTE
• The Music Library includes a number of duets.
While a duet is selected, you can turn off the first
piano <Primo> or second piano <Secondo> tone and
play along with the song.
PREPARATION
• Select the song you want to practice and adjust the
tempo. See “Configuring Settings with the
Keyboard” on page E-19.
• A number of tunes have tempo changes part way
through in order to produce specific musical effects.
1.
While holding down the FUNCTION button,
press the RECORDER (L) button or
METRONOME (R) button to select the part
you want to turn off.
• Pressing a button toggles its part on (button lamp on)
and off (button lamp off).
Left hand
Right hand
Right hand
part off
Left hand
part off
Both parts on
2.
Press the SONG a button.
• This starts playback, without the part you turned off
in step 1.
3.
4.
Play the missing part on the keyboard.
To stop playback, press the SONG a
button again.
E-14
Download from Www.Somanuals.com. All Manuals Search And Download.
Recording and Play Back
FUNCTION
SONG a
E
RECORDER
METRONOME
You can store the notes you play in digital piano
memory for later playback.
Recording Data Storage
• Starting a new recording deletes any data that was
previously recorded in memory.
• Should power fail during recording, all of the data in
the track you are recording will be deleted.
Tracks
A track is a container of recorded data, and a song
consists of two tracks: Track 1 and Track 2. You can
record each track separately and then combine them so
they play back together as a single song.
IMPORTANT!
• CASIO COMPUTER CO., LTD. takes no
responsibility for any damages, lost profits, or claims
by third parties arising from the deletion of recorded
data due to malfunction, repair, or for any other
reason.
While playing
Track 1
Record
back. . .
Song
Using the RECORDER Button
Track 2
Record
Each press of the RECORDER button cycles through
the recording options in the sequence shown below.
Lit
Flashing
Off
Memory Capacity
• You can record approximately 5,000 notes in digital
piano memory.
• The RECORDER button lamp will flash at high
speed when memory runs low.
Playback
Standby
Record
Standby
Normal
• Recording stops automatically if the number of
notes in memory exceeds the maximum.
Recorded Data
• Keyboard play
• Tone used
• Pedal operations
• Reverb and chorus settings (Track 1 only)
• Tempo setting (Track 1 only)
• Layer setting (Track 1 only)
• Split setting (Track 1 only)
• Temperament and base note settings (Track 1 only)
• Octave shift setting (Track 1 only)
E-15
Download from Www.Somanuals.com. All Manuals Search And Download.
Recording and Play Back
4.
5.
Start playing something on the keyboard.
• Recording will start automatically.
To record to a specific track of
a song
After recording to either of the tracks of a song, you can
record to the other track while listening to playback
what you recorded in the first track.
To stop recording, press the SONG a
button.
• This will cause the RECORDER button lamp and the
lamp of the track you recorded to change from
flashing to lit.
• To play back the track you just recorded, press the
SONG a button.
1.
Press the RECORDER button twice so its
lamp is flashing.
6.
After you are finished recording or playing
back, press the RECORDER button so its
lamp goes out.
• At this time the L lamp will flash to indicate that the
digital piano is standing by for recording to Track 1.
2.
3.
While holding down the FUNCTION button,
press the RECORDER (L) button or
METRONOME (R) button to select the track
you want to record.
• Make sure that the indicator lamp for the record track
is flashing.
Track 1: L lamp
Track 2: R lamp
Example:Track 1 selected
Select the tone and effects (Track 1 only) you
want to use in your recording.
• Tone (page E-7)
• Effects (page E-10)
NOTE
• If you want the metronome to sound while you are
recording, configure the beat and tempo settings,
and then press the METRONOME button. See
“Using the Metronome” on page E-11 for more
information.
E-16
Download from Www.Somanuals.com. All Manuals Search And Download.
Recording and Play Back
To record to one track of a
song while listening to the
playback of the other track
Playing Back from Digital
Piano Memory
1.
Press the RECORDER button so its lamp is
lit.
1.
Press the RECORDER button so its lamp is
lit.
g
NOTE
• When a song has something recorded in both tracks,
you can turn off one track and play back just the
other track, if you want.
2.
While holding down the FUNCTION button,
press the RECORDER (L) button or
METRONOME (R) button to select the track
you want to play back while recording.
2.
Press the SONG a button.
• This starts playback of the song and/or track you
selected.
3.
4.
Press the RECORDER button so its lamp is
flashing.
NOTE
• This will cause the L lamp to flash.
• You can change the tempo setting as a track is
playing.
• Press the SONG a button again to stop playback.
While holding down the FUNCTION button,
press the RECORDER (L) button or
METRONOME (R) button to select the track
you want to record.
• Make sure that the indicator lamp for the record track
is flashing.
Example:To listen to playback of Track 1 as you record
to Track 2
Lit (Play)
Flashing (Record Standby)
5.
6.
Select the tone and effects (Track 1 only) you
want to use for your recording.
Press the SONG a button or play
something on the keyboard.
• This will start both playback of the recorded track
and recording to the other track.
7.
To stop recording, press the SONG a
button.
E-17
Download from Www.Somanuals.com. All Manuals Search And Download.
Recording and Play Back
Deleting Recorded Data
The following procedure deletes a specific track of a
song.
IMPORTANT!
• The procedure below deletes all of the data of the
selected track. Note that the delete operation cannot
be undone. Check to make sure you really do not
need the data in digital piano memory before you
perform the following steps.
1.
Press the RECORDER button twice so its
lamp is flashing.
2.
3.
While holding down the FUNCTION button,
press the RECORDER (L) button or
METRONOME (R) button to select the track
you want to delete.
Press the RECORDER button until its lamp is
lit.
• This will cause the lamp of the track you selected in
step 2 of this procedure to flash.
Example:If you selected Track 2 for deletion
Off
Flashing: Delete standby
4.
Once again, hold down the FUNCTION
button and press the button that corresponds
to the track you want to delete (RECORDER
(L) or METRONOME (R)).
• This deletes the selected track and enters playback
standby.
• To cancel the delete operation at any time, press the
RECORDER button twice so its lamp is unlit.
NOTE
• Only the digital piano’s METRONOME button and
RECORDER button are operational from step 3
until you actually perform the delete operation in
step 4. No other button operation can be performed.
E-18
Download from Www.Somanuals.com. All Manuals Search And Download.
Configuring Settings with the Keyboard
FUNCTION
E
In addition to selecting tones and Music Library tunes,
4.
Release the FUNCTION button to complete
the setting procedure.
you also can use the FUNCTION button in
combination with the keyboard keys to configure
effect, keyboard touch, and other settings.
NOTE
• You can configure the digital piano so no operation
tone sounds in step 3. For details, see “bt Operation
tone” under “Parameter List” on pages E-21 - E-23.
To configure settings with the
keyboard
Keyboard Setting Operation Types
1.
Use the “Parameter List” on pages E-21 -
E-23 to find the setting you want to configure,
and note its details.
There are three types of operations that you can
perform while configuring settings with the keyboard
keys: Type A, Type B, and Type C.
2.
Use “Keyboard Keys Used for Configuring
Settings” on page E-20 to find the location on
the keyboard for configuring the setting you
want.
Type A: Direct input
Example: Pressing the STRINGS keyboard key to select the
STRINGS 1 tone
Type B: Raising or lowering a setting using the + and
3.
While holding down the FUNCTION button,
press the keyboard key for the setting you
want to configure.
• The digital piano will sound an operation tone after it
configures the setting.
– or T and S keyboard keys
• Holding down a key raises or lowers the setting at
high speed.
• To return to the initial default setting, press both
keys at the same time.
Example:To lower the transpose setting by one
Type C: Value input using the numeric keys (0 to 9)
semitone
Example: To enter “120”, press keys 1, 2, 0.
NOTE
• You can find out what operation type applies to each
setting by checking the “Operation Type” in the
“Parameter List” on pages E-21 - E-23.
Transpose T key
E-19
Download from Www.Somanuals.com. All Manuals Search And Download.
Configuring Settings with the Keyboard
Keyboard Keys Used for Configuring Settings
• The numbers 1 through cl correspond to the same numbers in the “Parameter List” on pages E-21 - E-23.
[Left keyboard]
Reverb
1
Chorus
2
Keyboard key (Transpose)
3
Keyboard tuning (Tuning)
4
Octave shift
5
Temperament
6
Tempo/Temperament select
7
1
2
3
4
1
2
3
4
ꢀ
ꢁ
ꢀ
ꢁ
ꢀ
ꢁ
[Overall]
[Center keyboard]
Song select/Base note
8
Tone selection
9
Operation lock
cl
[Right keyboard]
Back up
ck
Operation tone
bt
Local control
bs
Send channel
br
Layer balance
Metronome volume
bq
bm
USB device mode
bp
Song volume
bl
Brilliance
Touch response
bo
bk
Metronome beat
bn
ꢀ
ꢁ
−
+
OFF ON OFF ON OFF ON OFF
ON
E-20
Download from Www.Somanuals.com. All Manuals Search And Download.
Configuring Settings with the Keyboard
Parameter List
■ Tones
Operation
Type
Parameter
Settings
Description
Remarks
(page E-19)
E
Reverb
1 to 4
Default: 2
A
Specifies the reverb of notes.
(page E-10)
Chorus
1 to 4
Default: 2
A
A
Controls the breadth of notes.
(page E-10)
Tone selection
See page E-7.
Default: GRAND
PIANO
Assigns a tone to the keyboard.
(page E-7)
(MODERN)
Brilliance
–3 to 0 to 3
B
B
Specifies the brilliance of notes.
(page E-8)
(BRILLIANCE) Default: 0
Layer balance –24 to 0 to 24
Default: 0
Specifies the volume balance
between the main tone and the
layered tone. (page E-9)
■ Song/Metronome
Operation
Parameter
Settings
Type
Description
Remarks
(page E-19)
Tempo (TEMPO) 20 to 255
B (+/–)
Specifies the tempo of Music
• Always enter three digits when using the
number keys (0 to 9) to input a value.
Example: To input 90, enter 0, 9, 0 (leading
zero required).
• During recording, pressing + and – at the
same time sets a value of 120.
Default: 120
C (0 to 9) Library songs, the metronome,
recording and playback, etc.
(page E-11)
Song select
01 to 61
B (+/–)
C (0 to 9) (page E-13)
Selects a Music Library tune.
• Always enter two-digits when using the
number keys (0 to 9) to input a value.
Example: To input 8, enter 0, 8 (leading
zero required).
(SONG SELECT) Default: 01
• This setting cannot be changed while
recording.
Song volume
(SONG VOLUME) Default: 42
00 to 42
B
B
Sets the volume level of Music
Library playback.
Metronome
volume
00 to 42
Default: 36
Specifies the metronome volume.
(page E-11)
(METRONOME
VOLUME)
Metronome beat 0, 2, 3, 4, 5, 6
(METRONOME Default: 4
BEAT)
A
Specifies the metronome beat.
(page E-11)
• The metronome beat setting cannot be
changed while playback of a Music Library
tune is in progress.
E-21
Download from Www.Somanuals.com. All Manuals Search And Download.
Configuring Settings with the Keyboard
■ Keyboard
Operation Type
(page E-19)
Parameter
Settings
Description
Remarks
Keyboard key
(Transpose)
–12 to 0 to 12
Default: 0
B
Raises or lowers the tuning of • The transpose setting cannot be
3
the digital piano in semitone
steps.
configured while Music Library
playback is in progress or while in
the Duet Mode.
• Raising the key of the digital piano
can cause notes the highest part of
the range to become distorted.
Keyboard tuning –99 to 0 to 99
B
B
Raises or lowers the overall
pitch of the digital piano in 1-
cent steps (100 cents = 1
semitone) from the standard
pitch of A4 = 440 Hz.
• The pitch setting cannot be changed
while playback of a Music Library
tune is in progress.
4
5
(Tuning)
Default: 0
Octave shift
–2 to 0 to 2
Default: 0
Change the range of the
keyboard in octave units.
• You can configure octave shift
settings for the main tone part and
layered tone part.
• You cannot configure octave shift
settings for split tone parts.
Temperament
(TEMPERAMENT) 00 to 16
Temperament
select
Temperament:
Hold down
You can change the scale
<Temperaments>
00: Equal / 01: Pure Major /
6
7
FUNCTION as you (tuning system) of the
press each of the
–, +, 0 to 9 (C to B) following keyboard temperament to another tuning 04: Kirnberger 3 / 05: Werckmeister /
Base note:
keyboard from standard equal 02: Pure Minor / 03: Pythagorean /
(TEMPERAMENT
SELECT)
Temperament
Base note
keys.
that is more suitable for
playing Indian music, Arabic 09: Hijaz / 10: Saba / 11: Dashti /
06: Mean-Tone / 07: Rast / 08: Bayati /
Defaults:
Temperament: 00
(Equal Temperament)
Base note: C
1. TEMPERAMENT music, classical pieces, etc.
12: Chahargah / 13: Segah /
14: Gurjari Todi / 15: Chandrakauns /
16: Charukeshi
8
bo
(
)
6
(BASE NOTE)
2. TEMPERAMENT
SELECT (
3. BASE NOTE (
)
7
<Base notes>
#
)
b
8
–: C / +: C / 0: D / 1: E / 2: E / 3: F /
#
b
b
4: F / 5: G / 6: A / 7: A / 8: B / 9: B
Touch response Off (OFF), 1 to 3
A
Specifies the relative touch of
the keyboard keys.
(TOUCH
Default: 2
RESPONSE)
Setting a smaller value causes
lighter touch to produce more
powerful sound.
E-22
Download from Www.Somanuals.com. All Manuals Search And Download.
Configuring Settings with the Keyboard
■ MIDI and Other Settings
Operation
Type
Parameter
Settings
Description
Remarks
(page E-19)
USB device
mode (USB
DEVICE MODE)
MIDI, Storage
Default: MIDI
–
The digital piano enters MIDI
mode automatically when it is
connected to a computer by a USB
cable. Select storage when saving
Recorder memory song data to a
computer or when loading
• While storage is selected for this setting, the
GRAND PIANO (MODERN, CLASSIC)
and ELEC PIANO button lamps flash, and
all other lamps are unlit.
• All digital piano operations are disabled at
this time.
bp
E
computer song data to digital
piano memory. (page E-25)
• Each press of the USB device mode
keyboard key toggles between the MIDI
and storage modes.
Send channel
Local control
01 to 16
Default: 01
B
Specifies one of the MIDI channels
(1 through 16) as the Send channel,
which is used for sending MIDI
messages to an external device.
br
bs
Off, On
Default: On
A
Selecting “Off” for Local control
cuts off the digital piano’s sound
source, so no sound is produced by
the digital piano when keys are
pressed.
• The Local control setting cannot be changed
while playback of a Music Library tune is in
progress.
Operation tone Off, On
A
A
Selecting “Off” disables sounding • This setting is retained even when the
of the operation tone whenever a digital piano is turned off.
keyboard key is pressed while the • The operation tone setting cannot be
bt
ck
Default: On
FUNCTION is depressed.
changed while Music Library playback is in
progress, while the metronome is
sounding, and during recording.
Back up
Off, On
Default: Off
When “On” is selected for this
setting, the digital piano will
remember its current settings*1,
and restore them when it is turned
on again.
• The back up setting cannot be changed
while Music Library playback is in
progress, while the metronome is
sounding, in the Duet Mode, and during
recording.
When “Off” is selected, settings*2
are reset to their initial defaults
whenever the digital piano is
turned on.
*1The following settings are not remembered.
• Duet Mode
• Tune LR (part)
• Local control
*2Except for the operation tone on/off
setting.
Operation lock Off, On
A
Selecting “On” for this setting locks • The operation lock setting cannot be
cl
Default: Off
the digital piano’s buttons (except
for the power button and the
buttons required for unlock), so no
operation can be performed.
Turn on operation lock when you
want to protect against
changed while Music Library playback is in
progress, while the metronome is
sounding, and during recording.
unintentional button operations.
E-23
Download from Www.Somanuals.com. All Manuals Search And Download.
Connecting to a Computer
You can connect the Digital Piano to a computer and
2.
After starting up your computer, use a
commercially available USB cable to connect
it to the Digital Piano.
exchange MIDI data between them. You can send play
data from the Digital Piano to music software running
on your computer, or you can send MIDI data from
your computer to the Digital Piano for playback.
Digital Piano USB port
USB cable
(A-B type)
Minimum Computer System
Requirements
A connector
B connector
The following shows the minimum computer system
requirements for sending and receiving MIDI data.
Check to make sure that your computer complies with
these requirements before connecting the Digital Piano
to it.
Computer USB port
3.
Turn on the Digital Piano.
• If this is the first time you are connecting the Digital
Piano to your computer, the driver software required
to send and receive data will be installed on your
computer automatically.
z Operating System
Windows® XP (SP2 or later)*1
Windows Vista® *2
Mac OS® X (10.3.9, 10.4.11 or later, 10.5.6 or later)
*1: Windows XP Home Edition
Windows XP Professional (32- bit)
*2: Windows Vista (32- bit)
4.
5.
Start up your computer’s music software.
Configure the music software settings to
select one of the following as the MIDI device.
CASIO USB-MIDI : (For Windows Vista, Mac OS X)
USB Audio Device: (For Windows XP)
z USB port
• For information about how to select the MIDI device,
see the user documentation that comes with the
music software you are using.
IMPORTANT!
• Never connect to a computer that does not conform
to the above requirements. Doing so can cause
problems with your computer.
IMPORTANT!
• Be sure to turn on the Digital Piano first before
starting up your computer’s music software.
Connecting the Digital Piano
to Your Computer
NOTE
• Once you are able to connect successfully, there is no
problem with leaving the USB cable connected when
you turn off your computer and/or Digital Piano.
• For detailed specifications and connections that
apply to MIDI data send and receive by this Digital
Piano, see the latest support information provided
by the website at the following URL.
IMPORTANT!
• Make sure you follow the steps of the procedure
below exactly. Connecting incorrectly can make data
send and receive impossible.
1.
Turn off the Digital Piano and then start up
your computer.
• Do not start up the music software on your computer
yet!
E-24
Download from Www.Somanuals.com. All Manuals Search And Download.
Connecting to a Computer
2.
Change the digital piano’s USB device mode
to storage.
Using MIDI
What is MIDI?
The letters MIDI stand for Musical Instrument Digital
Interface, which is the name of a worldwide standard
for digital signals and connectors that makes it possible
to exchange musical data between musical instruments
and computers (machines) produced by different
manufacturers.
E
NOTE
• For detailed information about MIDI
Implementation, visit the CASIO website at:
• While holding down the FUNCTION button, press
the keyboard key that corresponds to the USB device
mode.
See “Send channel” and “Local control” on page E-23.
• After this setting is changed, the GRAND PIANO
(MODERN, CLASSIC) and ELEC PIANO button
lamps flash, and all other lamps are unlit.
• See “USB device mode (USB DEVICE MODE)” on
page E-23 for more information.
Transferring Song Data with a
Computer
Use the procedures in this section to transfer Recorder
memory data to a computer for storage, and to load
songs to user song memory (Music Library 61).
3.
On your computer, perform the required
operation to display your computer’s storage
devices.
IMPORTANT!
• Turning off the Digital Piano while it is exchanging
data with a computer can cause data in Digital Piano
memory to become corrupted. If this happens, a
memory format operation will start the next time you
turn on the Digital Piano. Note that it takes about 20
seconds for the format operation to finish, and you
will not be able to perform any operation during that
time.
If your computer is
running this operating
system:
Do this:
Windows XP
Windows Vista
Mac OS
Double-click “My Computer”.
Double-click “Computer”.
Skip step 3 and double-click
“PIANO” on your Mac
desktop.
1.
Perform steps 1 through 3 of the procedure
under “Connecting the Digital Piano to Your
Computer” on page E-24.
• The memory of this digital piano will appear as
“PIANO” under “Devices with Removable Storage”.
E-25
Download from Www.Somanuals.com. All Manuals Search And Download.
Connecting to a Computer
4.
Double-click “PIANO”.
■ To load a song into user song memory
(Music Library 61)
• “PIANO” contains folders named MUSICLIB and
RECORDER. Use MUSICLIB to load a song into the
piano’s user song memory (Music Library 61), and
RECORDER to transfer Recorder memory data to and
from your computer.
1. Copy the file (.MID or .CM2) you want to load into
user song memory to the MUSICLIB folder.
2. Change the name of the file to BIDSNG01, with a file
name extension of .MID or .CM2.
• If there are two files with the names BIDSNG01.MID
and BIDSNG01.CM2 in the MUSICLIB folder, only
the BIDSNG01.MID data will be loaded into user
song memory. If you want the BIDSNG01.CM2 file
to be loaded in this case, change the name of the
BIDSNG01.MID to something else.
NOTE
Folder
Name
Data Type
File Name and Extension*
• The message “Cannot rename MIDIDATA” will
appear on your computer screen if you try to change
the name of the copied file to BIDSNG01.MID while
there is already a file in the MUSICLIB folder named
BIDSNG01.MID. Change the name of the current
BIDSNG01.MID to something else and then rename
the copied file to BIDSNG01.MID.
User songs
MUSICLIB BIDSNG01.MID: SMF
format data (format 0/1)
BIDSNG01.CM2: CASIO
original format data
Recorder
memory data
RECORDER BIDREC01.CSR: CASIO
original format data
■ To transfer Recorder memory data between
* Before starting a store or load operation, first check
the file name and extension to ensure it matches the
ones shown in this column.
the digital piano and your computer
To transfer the digital piano’s current Recorder memory
data to your computer, copy the contents of the
RECORDER folder to your computer.
To return Recorder data you previously saved to your
computer back to Recorder memory, copy it back to the
RECORDER folder (and replace the current
RECORDER folder contents).
IMPORTANT!
• The initial default configuration for Windows XP and
Windows Vista is to hide file name extensions.
Perform one of the following operations on your
computer to show file name extensions.
To show file name extensions under Windows XP
1. Open the folder you want.
2. On the [Tools] menu, click [Folder Options].
3. Click the [View] tab. In the [Advanced settings]
list, clear the check box next to [Hide extensions
for known file types].
4. Click [OK].
To show file name extensions under Windows Vista
1. Open Folder Options by clicking the [Start] button,
clicking [Control Panel], clicking [Appearance and
Personalization], and then clicking [Folder
Options].
2. Click the [View] tab. Under [Advanced settings]
clear the [Hide extensions for known file types]
check box.
3. Click [OK].
E-26
Download from Www.Somanuals.com. All Manuals Search And Download.
Connecting to a Computer
5.
After the file copy operation is complete,
return the USB device mode to MIDI.
• If you are using a Macintosh, perform the eject
operation (drag them to the trash can).
• While holding down the FUNCTION button, press
the applicable keyboard key. See “USB device mode
(USB DEVICE MODE)” on page E-23 for more
information.
E
• Returning the USB device mode to MIDI will load the
contents of MUSICLIB into user song memory and
the contents of RECORDER into Recorder memory.
IMPORTANT!
• A data conversion error is indicated when both of the
SONG a button lamps, and the GRAND PIANO
(MODERN) button, GRAND PIANO (CLASSIC)
button, and ELEC PIANO button lamps are all lit,
and all other lamps are unlit.
Copyrights
The rights of creators and copyright holders of music,
images, computer programs, databases, and other
data are protected by copyright laws. You are allowed
to reproduce such works for personal or non-
commercial use only. For any other purpose, all
reproduction (including data format conversion),
modification, transfer of reproductions, distribution
over a network, or any other use without permission
of the copyright holder exposes you to claims for
damages and criminal prosecution for copyright
infringement and violation of the author’s personal
rights. Be sure to reproduce and otherwise use
copyrighted works only in accordance with applicable
copyright laws.
E-27
Download from Www.Somanuals.com. All Manuals Search And Download.
Assembling the Stand
CAUTION
Unpacking
PREPARATION
• This stand does not include any of the tools required
for assembly. It is up to you to prepare a large
Philips head (+) screwdriver for assembly.
• Assembly of the stand should be performed by at
least two people working together.
• This stand should be assembled on a flat surface.
• Do not remove the tape securing the keyboard cover
in place until assembly is complete. Removing the
tape can cause the keyboard cover to open and
close during assembly, creating the risk of personal
injury to your hands and fingers.
A
• Take care that you do not pinch your fingers
between parts when assembling them.
C
B
To assemble the stand
1.
Attach side panels A and B to crosspiece D.
Secure the side panels using four E screws.
D
• When installing part 2, slide the brackets 3 into the
slots in either end crosspiece D. If the brackets 3 are
Part
Qty
4
E
F
G
H
I
J
not inserted into the ends of the crosspiece as far as
D
6
1
they will go, the screws E will not be able to enter
into the screw holes of the brackets 3, which can strip
the threads of the screws.
2
2
4
• Cover the screw heads with the caps J.
J
1
K
A
E
J
D
IMPORTANT!
E
• If anything is missing or damaged, contact your local
CASIO service provider.
• Note that use of any unauthorized parts or
components can cause damage to the stand and/or
the piano.
B
3
2
z Before starting stand assembly, unfasten the band
1
that bundles the pedal cord in the back of crosspiece
, and extend the cord.
D
2.
Slide back panel into the grooves of the
side panels.
C
4
1
C
4
E-28
Download from Www.Somanuals.com. All Manuals Search And Download.
Assembling the Stand
3.
Use the two screws to secure the top left
6.
Place the piano onto the stand.
I
and right edges of the back panel to the
C
brackets of side panels and
.
B
5
A
• At location , slip the clip onto to the screw
6
G
I
before installing the screw.
9
9
5
6
E
G
I
I
• At this time the screws on the bottom of the piano
should hook into the cutouts in the stand brackets
8
9
.
4.
5.
Next, secure the bottom of the back panel
C
with the six screws
.
F
Back of piano
A
B
8
Bracket cutout
C
9
Stand side panel
F
7.
Use the two butterfly bolts to secure the
H
Adjust the height adjustment screw to
7
piano to the stand.
provide support so crosspiece does not
D
bow downwards when the pedals are
pressed.
H
IMPORTANT!
• The butterfly bolts keep the piano from slipping off
the stand. Never use the piano without the butterfly
bolts installed.
D
7
IMPORTANT!
• Pressing the pedals without adjusting height
adjustment screw can result in damage to
7
crosspiece . Always make sure you adjust height
D
adjustment screw before operating the pedals.
7
E-29
Download from Www.Somanuals.com. All Manuals Search And Download.
Assembling the Stand
8.
Affix the adaptor cord clip next to the
power terminal (DC12V).
K
To install the music stand
• For information about securing the cord, see “Power
Outlet” on page E-4.
1.
Install the music stand by inserting its pegs
into the holes in the top of the piano.
DC 12V terminal
K
To connect the pedal cord
1.
Orienting the pedal plug as shown in the
illustration, plug it into the pedal connector on
the bottom of the piano.
• Secure the pedal cord with the clip
.
G
Pedal plug
G
E-30
Download from Www.Somanuals.com. All Manuals Search And Download.
Reference
Troubleshooting
See
Page
Problem
Cause
Action
n
No sound is produced when I 1. The VOLUME controller is set to
1. Rotate the VOLUME controller more
) E-8
) E-6
press a keyboard key.
“MIN”.
towards “MAX”.
2. Headphones or an adaptor plug is
plugged into one of the PHONES
jacks.
2. Disconnect whatever is connected to the
PHONES jacks.
3. MIDI Local control is turned off.
3. Turn on the Local control setting.
) E-23
The pitch of the digital piano 1. The digital piano’s key setting is
1. Change the key setting to “0”, or turn digital ) E-22
is off.
something other than “0”.
piano power off and then back on again.
2. Digital piano tuning is incorrect.
2. Adjust digital piano tuning, or turn the digital ) E-22
piano off and then back on again.
3. Octave shift is enabled.
3. Change the octave shift setting to 0.
) E-22
) E-22
4. A non-standard temperament setting 4. Change the temperament setting to
is being used.
“00:Equal”, which is the standard modern
tuning.
Nothing happens when I
press a pedal.
The pedal cord is not connected.
The “Back up” feature is turned on.
Connect the pedal cord correctly.
) E-30
) E-23
Tones and/or effects sound
strange. Turning power off
and then back on again does
not eliminate the problem.
Turn off “Back up”. Next, turn power off and
then back on again.
Example: Note intensity does
not change even though I
alter key pressure.
I cannot transfer data after
connecting the digital piano
to a computer.
–
1. Check to make sure that the USB cable is
connected to the digital piano and
computer, and that the correct device is
selected with your computer’s music
software.
) E-24
2. Turn off the digital piano and then exit the
music software on your computer. Next,
turn the digital piano back on and then
restart the music software on your
computer.
It takes a long time before I
can use the Digital Piano after corrupted because a data transfer
Digital Piano memory data was
It takes about 20 seconds after you turn on
power to perform the memory format
) E-25
I turn it on.
operation with a computer was in
operation. Wait until the format operation is
progress the last time you turned off the complete. Note that you should take care to
piano. When this happens, the Digital
Piano performs a memory format
operation the next time you turn it on.
You cannot perform any other operation
while a format operation is in progress.
avoid turning off the Digital Piano while a data
transfer operation with a computer is in
progress.
A tone’s quality and volume
sounds slightly different
depending where it is played
on the keyboard.
This is an unavoidable result of the digital sampling process,* and does not indicate malfunction.
* Multiple digital samples are taken for the low range, middle range, and high range of the original
musical instrument. Because of this, there may be very slight differences in tonal quality and
volume between sample ranges.
When I press a button, the
This happens when the sounds of multiple parts are sounding at the same time while using layer,
note that is sounding cuts out using the Duet Mode, playing back a built-in tune, recording, etc. Pressing a button when one of
momentarily or there is a
slight change in how effects
are applied.
these conditions exists will cause the effect setting that is built into the tone to change automatically,
which causes notes to cut out momentarily or causes a slight change in how effects are being
applied.
E-31
Download from Www.Somanuals.com. All Manuals Search And Download.
Reference
Product Specifications
Model
AP-220BN
Keyboard
88-key piano keyboard, with Touch Response
128 notes
Maximum Polyphony
Tones
16
• Layer (excluding bass tones)
• Split (Low-range bass tones only)
Effects
Brilliance (–3 to 0 to 3), Reverb (4 types), Chorus (4 types), DSP, Acoustic Resonance
Metronome
• Beats: 0, 2, 3, 4, 5, 6
• Tempo Range: 20 to 255
Duet
Adjustable tone range (–1 to 2 octaves)
Music Library
• Number of Songs: 60, User Songs: 1 (memory capacity; up to 65KB )*
* Based on 1 KB = 1024 bytes, 1 MB = 10242 bytes
• Song volume: Adjustable
• Part On/Off: L, R
Recorder
• Functions: Real-time recording, playback
• Number of Song: 1
• Number of Tracks: 2
• Capacity: Approximately 5,000 notes total
• Recorded Data Protection: Built-in flash memory
Pedals
Damper, Soft, Sostenuto
Other Functions
• Touch Select: 3 types, Off
• Transpose: 2 octaves (–12 to 0 to 12)
• Tuning: A4 = 440.0 Hz 99 cents (variable)
• Temperament
• Octave shift
• Operation Lock
MIDI
16-channel multi-timbre receive
Inputs/Outputs
• PHONES jacks: Stereo standard jacks × 2
Output impedance: 3Ω
Output Voltage: 1.5V (RMS) MAX
• Power: 12V DC
• USB port: TYPE B
• Pedal connector
Speakers
φ 12cm × 2 (Output 8W + 8W)
AC Adaptor: AD-A12150LW
12V = 18W
Power Requirements
Power Consumption
Dimensions
Digital Piano and Stand: 139.5 (W) × 43.2 (D) × 83.5 (H) cm (54 15
/
16 × 17 × 32 7/8 inch)
Weight
Digital Piano and Stand: approximately 37.5kg (82.6lbs)
•
Specifications and designs are subject to change without notice.
B
E-32
Download from Www.Somanuals.com. All Manuals Search And Download.
Reference
• Any reproduction of the contents of this manual,
Operating Precautions
Be sure to read and observe the following operating
precautions.
either in part or its entirety, is prohibited. Except for
your own, personal use, any other use of the
contents of this manual without the consent of
CASIO is prohibited under copyright laws.
• IN NO EVENT SHALL CASIO BE LIABLE FOR
ANY DAMAGES WHATSOEVER (INCLUDING,
WITHOUT LIMITATION, DAMAGES FOR LOSS
OF PROFITS, BUSINESS INTERRUPTION, LOSS
OF INFORMATION) ARISING OUT OF THE USE
OF OR INABILITY TO USE THIS MANUAL OR
PRODUCT, EVEN IF CASIO HAS BEEN ADVISED
OF THE POSSIBILITY OF SUCH DAMAGES.
• The contents of this manual are subject to change
without notice.
■ Location
Avoid the following locations for this product.
• Areas exposed to direct sunlight and high humidity
• Areas subjected to temperature extremes
• Near a radio, TV, video deck, or tuner
E
The above devices will not cause malfunction of the
product, but the product can cause interference in
the audio or video of a nearby device.
■ User Maintenance
• Never use benzine, alcohol, thinner, or other
chemical agents to clean the product.
• To clean the product or its keyboard, wipe with a
soft cloth moistened in a weak solution of water and
a mild neutral detergent. Wring all excess moisture
from the cloth before wiping.
■ AC Adaptor Handling Precautions
• Use a power outlet that is easily accessible so you
can unplug the AC adaptor when a malfunction
occurs or whenever else you need to do so.
• The AC adaptor is intended for indoor use only. Do
not use it where it might be exposed to splashing or
moisture. Do not place any container, such as a
flower vase, that contains liquid on the AC adaptor.
• Store the AC adaptor in a dry place.
• Use the AC adaptor in an open, well-ventilated area.
• Never cover the AC adaptor with newspaper, a table
cloth, a curtain, or any other similar item.
• Unplug the AC adaptor from the power outlet if you
do not plan to use the Digital Piano for a long time.
• Never try to repair the AC adaptor or modify it in
any way.
■ Included and Optional Accessories
Use only accessories that are specified for use with this
product. Use of unauthorized accessories creates the
risk of fire, electric shock, and personal injury.
■ Weld Lines
Lines may be visible on the exterior of the product.
These are “weld lines” that result from the plastic
molding process. They are not cracks or scratches.
• AC adaptor operating environment
Temperature: 0 to 40°C
Humidity: 10% to 90% RH
• Output polarity:
■ Musical Instrument Etiquette
Always be aware of others around you whenever using
this product. Be especially careful when playing late at
night to keep the volume at levels that do not disturb
others. Other steps you can take when playing late at
night are closing the window and using headphones.
E-33
Download from Www.Somanuals.com. All Manuals Search And Download.
Reference
AC Adaptor Handling Precautions
Model: AD-A12150LW
1. Read these instructions.
2. Keep these instructions on hand.
3. Heed all warnings.
4. Follow all instructions.
5. Do not use this product near water.
6. Clean only with a dry cloth.
7. Do not install near radiators, heat registers, stoves, or any other source of heat (including amplifiers).
8. Use only attachments and accessories specified by the manufacturer.
9. Refer all servicing to qualified service personnel. Servicing is required after any of the following occurs:
when the product is damaged, when the power supply cord or plug is damaged, when liquid is spilled into
the product, when a foreign object falls into the product, when the product is exposed to rain or moisture,
when the product does not operate normally, when the product is dropped.
10. Do not allow the product to be exposed to dripping or splashing liquid. Do not place any object containing
liquid on the product.
11. Do not allow the electrical load output to exceed the label rating.
12. Make sure the surrounding area is dry before plugging into a power source.
13. Make sure the product is oriented correctly.
14. Unplug the product during lightning storms or when you do not plan to use it for a long time.
15. Do not allow product ventilation openings to become blocked. Install the product in accordance with the
manufacturer’s instructions.
16. Take care the power cord is located where it will not be stepped upon or bent severely, particularly in
locations close to plugs and convenience receptacles, and in locations where it exits from the product.
17. The AC adaptor should be plugged into a power outlet as close to the product as possible to allow
immediate disconnection of the plug in case of emergency.
The symbol below is an alert indicating un-insulated hazardous voltage inside the product’s enclosure, which
may be sufficient to constitute the risk of electric shock to users.
’
The symbol below is an alert indicating the presence of important operating and maintenance (servicing)
instructions in the documentation that accompanies the product.
*
E-34
Download from Www.Somanuals.com. All Manuals Search And Download.
Appendix/Apéndice
Tone List/Lista de tonos
Song List/Lista de canciones
Bank Select MSB/
MSB de selección de
banco
No./Nº
01
02
03
04
05
06
07
08
09
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
31
32
33
34
35
36
37
38
39
40
41
42
43
44
45
46
47
48
49
50
51
52
53
54
55
56
57
58
59
60
Song Name/Nombre de canciones
Tone Name/
Nombre de tonos
Program Change/
Cambio de programa
Nocturne Op.9-2
Fantaisie-Impromptu Op.66
Étude Op.10-3 “Chanson de l’adieu”
Étude Op.10-5 “Black Keys”
Étude Op.10-12 “Revolutionary”
Étude Op.25-9 “Butterflies”
Prélude Op.28-7
GRAND PIANO MODERN
GRAND PIANO CLASSIC
GRAND PIANO VARIATION
ELEC PIANO
0
0
2
1
0
0
0
1
0
0
0
0
0
1
0
0
0
1
0
4
FM E.PIANO
5
60’S E.PIANO
4
Valse Op.64-1 “Petit Chien”
Valse Op.64-2
HARPSICHORD
VIBRAPHONE
6
11
19
17
16
16
49
48
32
32
Moments Musicaux 3
PIPE ORGAN
Impromptu Op.90-2
JAZZ ORGAN
Marche Militaire 1 (Duet)
Frühlingslied [Lieder Ohne Worte Heft 5]
Fröhlicher Landmann [Album für die Jugend]
Von fremden Ländern und Menschen [Kinderszenen]
Träumerei [Kinderszenen]
Tambourin
ELEC ORGAN 1
ELEC ORGAN 2
STRINGS 1
STRINGS 2
BASS (LOWER) 1
BASS (LOWER) 2
Menuet BWV Anh.114 [Clavierbüchlein der Anna Magdalena Bach]
Inventio 1 BWV 772
Inventio 8 BWV 779
Inventio 13 BWV 784
Praeludium 1 BWV 846 [Das Wohltemperierte Klavier 1]
Le Coucou
Gavotte
Sonatina Op.36-1 1st Mov.
Sonatine Op.20-1 1st Mov.
Sonate K.545 1st Mov.
Sonate K.331 3rd Mov. “Turkish March”
Rondo K.485
Für Elise
Marcia alla Turca
Sonate Op.13 “Pathétique” 1st Mov.
Sonate Op.13 “Pathétique” 2nd Mov.
Sonate Op.13 “Pathétique” 3rd Mov.
Sonate Op.27-2 “Moonlight” 1st Mov.
Rhapsodie 2
Waltz Op.39-15 (Duet)
Liebesträume 3
Blumenlied
La Prière d’une Vierge
Csikos Post
Humoresque Op.101-7
Melodie [Lyrische Stücke Heft 2]
Sicilienne Op.78
Berceuse [Dolly] (Duet)
Arabesque 1
La Fille aux Cheveux de Lin [Préludes]
Passepied [Suite bergamasque]
Gymnopédie 1
Je Te Veux
Salut d’Amour
The Entertainer
Maple Leaf Rag
L’arabesque [25 Etüden Op.100]
La Styrienne [25 Etüden Op.100]
Ave Maria [25 Etüden Op.100]
Le retour [25 Etüden Op.100]
La chevaleresque [25 Etüden Op.100]
No.13 [Études de Mécanisme Op.849]
No.26 [Études de Mécanisme Op.849]
A-1
Download from Www.Somanuals.com. All Manuals Search And Download.
Model AP-220
Version : 1.0
MIDI Implementation Chart
Function
Transmitted
Recognized
Remarks
Basic
Channel
Default
Changed
1 - 16
1 - 16
1 - 16
1 - 16
Default
Messages
Altered
Mode 3
X
Mode 3
X
Mode
*1: Depends on tone
*1: Depende del tono
Note
Number
0 - 127
0 - 127
*
True voice
0 - 127 1
**: no relation
**: sin relación
Note ON
Note OFF
O
9nH v = 1 - 127
O
9nH v = 1 - 127
Velocity
**
X
8nH v = 64
X
9nH v = 0, 8nH v =
After
Touch
Key’s
Ch’s
X
X
X
O
Pitch Bender
X
O
Bank select
0,32
1
O
X
X
X
O
X
X
X
X
X
X
O
X
O
O
X
X
X
X
X
X
X
X
X
O
X
X
O
O
O
O
O
O
O
O
O
O
O
O
O
O
O
O
O
O
O
O
O
O
O
O
O
O
O
O
O
Modulation
Portamento Time
Data entry LSB, MSB*2
Volume
5
6, 38
7
Pan
Expression
10
11
16
17
18
19
64
65
66
67
76
77
78
80
81
82
83
84
91
93
DSP Parameter0*2
DSP Parameter1*2
DSP Parameter2*2
DSP Parameter3*2
Damper
Portamento Switch
Sostenuto
Control
Change
Soft pedal
Vibrato rate
Vibrato depth
Vibrato delay
DSP Parameter4*2
DSP Parameter5*2
DSP Parameter6*2
DSP Parameter7*2
Portamento Control
Reverb send
Chorus send
RPN LSB, MSB*2
All sound off
100, 101
120
Reset all controller
121
Program
Change
O
O
O
0 - 127
:True #
*2
System Exclusive
O
System
Common
: Song Pos
: Song Sel
: Tune
X
X
X
X
X
X
System
Real Time
: Clock
: Commands
O
O
X
X
Aux
: Local ON/OFF
: All notes OFF
: Active Sense
: Reset
X
O
X
X
X
O
O
X
Messages
Remarks
Mode 1 : OMNI ON, POLY
Mode 3 : OMNI OFF, POLY
Mode 2 : OMNI ON, MONO
Mode 4 : OMNI OFF, MONO
O : Yes
X : No
Download from Www.Somanuals.com. All Manuals Search And Download.
This recycle mark indicates that the packaging conforms to
the environmental protection legislation in Germany.
Esta marca de reciclaje indica que el empaquetado se
ajusta a la legislación de protección ambiental en Alemania.
C
MA0907-B Printed in China
AP220ES1B
Download from Www.Somanuals.com. All Manuals Search And Download.
|