Casio Clock PQ 70 User Manual

MA0811-EB  
PQ-70  
2. While the screen you want is displayed, use the + and – buttons (23) to change the flashing digits.  
Holding down + or changes the flashing digits at high speed.  
You can set the year in the range of 2000 to 2069. The day of the week is set automatically in accordance with  
the date setting.  
Pressing + or while the Time Setting Screen is on the display causes the seconds count to be reset to 00.  
Each press of + or while the 12-hour/24-hour Timekeeping Screen is on the display toggles between 12-hour  
and 24-hour timekeeping.  
() Decrease  
(+) Increase  
3. After making the settings you want, use the SET button (5) to display the Normal Timekeeping Screen.  
The clock automatically returns to the Normal Timekeeping Screen if you leave a setting screen on the display for  
about five minutes without performing any operation.  
USING THE ALARM  
The alarm sounds when the alarm time you set is reached. You can also use the Alarm Mode selector (6) to  
select the snooze alarm feature.  
Setting the Alarm Time  
Use the + and buttons (23) to set the alarm time.  
Pressing the + and buttons (23) causes the alarm time to appear in place of the date on the display.  
Holding down + or changes the digits at high speed.  
() Decrease  
CR2032  
3V  
(+) Increase  
Turning the Alarm On and Off  
Use the Alarm Mode selector (6) to turn the alarm on and off, and to select the snooze feature.  
Alarm Mode selector  
Description  
The alarm sounds at the preset time for one minute, and up to seven more times every  
five minutes thereafter. Even if you stop the alarm by pressing the SNOOZE button (7),  
the alarm sounds again five minutes later.  
SNZ (  
ON (  
)
The indicator  
activated.  
flashes on the display to indicate that the snooze feature is  
)
The alarm sounds at the preset time for one minute.  
The alarm does not sound.  
CR2032  
3V  
OFF  
The alarm time appears in place of the date on the display whenever the Alarm Mode selector (6) is set to ON  
or SNZ.  
The alarm sound changes over four levels as it sounds.  
Stopping the Alarm  
When the alarm is sounding, press the SNOOZE button (7) to stop it. When the snooze feature is turned on, the  
alarm will sound again in about five minutes.  
To turn off the snooze feature, slide the Alarm Mode selector (6) to OFF.  
Demo Alarm  
Press the DEMO button (4) to sound the alarm.  
ENGLISH  
A sticker is affixed to the glass of the clock when you purchase it. Be sure to remove the sticker before using the  
THERMOMETER FUNCTIONS  
Display Range: –19.9°C (Under: LL) to 49.9°C (Over: HH)  
Guaranteed Range: 0°C to 40°C  
clock.  
Depending on the clock model, its configuration may differ somewhat from that shown in the illustration.  
Alarm Off  
Snooze Alarm On  
Day of the week  
Current  
temperature  
HYGROMETER FUNCTIONS  
Display Range: 20% (Under: LL) to 90% (Over: HH)  
Sensor Precision: ±10% when temperature is 0°C to 40°C.  
Date  
Alarm time  
Current  
humidity  
(month - day)  
Alarm on  
indicator  
PM indicator  
Current time  
(Hour, minutes,  
seconds)  
Snooze on  
indicator  
USING THE STAND  
You can pull the stand out of the back of the clock to support it during use.  
When re-folding the stand, press until you feel it click into place.  
OPERATING PRECAUTIONS  
Do not use or store this clock in areas exposed to temperature extremes, strong magnetism, strong vibration, or  
strong impact.  
USING THE STRAP HOLE  
Heat can shorten battery life and cause malfunction. Keep the clock away from heaters and direct sunlight when  
using it.  
Never use the clock in a bathroom or any other area subject to high humidity.  
Never try to take the clock apart. Doing so can cause malfunction.  
A hole is provided for a strap that you can use while carrying the clock.  
The clock does not come with a strap.  
USING THE SPECIAL CASE  
Use of a separately available special case is recommended to protect the clock against damage when carrying it in  
a bag, etc.  
To clean the clock, use a soft, dry cloth or a cloth moistened in a solution of water and a mild neutral detergent.  
Wring out all excess moisture from the cloth. Never use thinner, benzene, alcohol or other similar agents.  
The LCD may become difficult to read at temperatures outside of the operating temperature range (0 to 40°C).  
Display figures may be difficult to read when viewed from an angle.  
Be sure to keep all user documentation handy for future reference.  
CASIO COMPUTER CO., LTD. assumes no responsibility for any loss, or any claims by third parties that may  
arise through the use of this clock.  
GENERAL GUIDE  
1RESET button  
Press this button to reset the clock after replacing its battery.  
+
23  
/
buttons (ALARM SET)  
Use these buttons to change the alarm time or the setting that is flashing on the display.  
4DEMO button  
Press this button to sound the alarm.  
5SET button  
Use this button when setting the current time.  
BATTERY REPLACEMENT  
Replace the battery whenever the display becomes dim and difficult to read.  
6Alarm Mode selector  
SNZ: Snooze alarm on  
ON: Alarm on  
OFF: Alarm off  
7SNOOZE button  
Pressing this button while the alarm is sounding stops the alarm.  
8Battery holder (Back of clock)  
9Battery  
To replace the battery  
1. Turn over the clock, pull out the battery holder and remove the old battery.  
2. Place a new battery onto the holder, making sure that its positive (+) side is facing upwards (towards the back of  
the clock). Loading the battery incorrectly can cause it to burst and damage the clock.  
3. Slide the battery holder back into the clock.  
4. Press the RESET button (1). Always be sure to press the RESET button (1) after replacing the battery.  
:Stand  
AStrap hole  
Battery precautions  
Keep batteries out of the reach of small children. If a battery is swallowed accidentally, contact your physician  
immediately.  
Be sure to load the battery with its positive (+) side is facing upwards (towards the back of the clock).  
Never charge the battery that comes with the clock.  
USING THE CLOCK  
1. Press the SET button (5) to cycle through the setting screens as shown below.  
Should a battery ever leak while in the clock, wipe out the fluid with a cloth, taking care not to get any onto your  
skin.  
Replace the battery at least once a year, even if it is still supplying power.  
The battery that comes with the clock loses some of its power during transport and storage.  
Month and Day  
Setting Screen  
Normal Timekeeping Screen  
Year Setting Screen  
SPECIFICATIONS  
Accuracy at normal temperature: ±60 seconds a month  
Calendar system: Auto-calendar pre-programmed from the year 2000 to 2069  
Alarm: Daily Alarm, Snooze Alarm (7 repeats), Demo Alarm  
Thermometer: Measuring range: 0°C to 40°C (guaranteed); Display range: –19.9°C to 49.9°C  
Temperature Sensor Precision: ±2°C in range of 0°C to 40°C  
Hygrometer Function: Measuring range: 20% to 90%, when temperature is 0°C to 40°C  
Humidity Sensor Precision: ±10%, when temperature is 0°C to 40°C  
Other: 12/24-hour timekeeping  
12-hour/24-hour  
Timekeeping Screen  
Time Setting Screen  
Battery: One lithium battery (type: CR2032)  
Battery life: Approximately 1 year  
1 minute alarm operation per day  
Operating temperature: 0°C to 40°C  
Download from Www.Somanuals.com. All Manuals Search And Download.  

Billy Goat Lawn Mower SC121H User Manual
Bolens Blower BL3100 User Manual
Bosch Power Tools Cordless Drill CLPK232 180 User Manual
Briggs Stratton Blower 233400 to 233499 User Manual
Brother Sewing Machine XE5366 001 User Manual
Califone Digital Camera DC596 User Manual
Canon Camcorder ZR600 User Manual
Casio Webcam EX TR350 User Manual
Channel Plus Camcorder H721 User Manual
ChefScape Blender SE650 User Manual