Casablanca Fan Company Fan 59081 User Manual

1.888.227.2178  
Table of Contents  
Congratulations on purchasing your new  
What to Expect with  
Your Installation  
Tools Needed  
Mounting Options  
Ceiling Bracket  
Casablanca® ceiling fan! It will provide  
comfort and performance in your home  
or office for many years. This installation  
and operation manual contains complete  
instructions for installing and operating  
your fan.  
30 inches  
4
2
3
7
5
We are proud of our work and appreciate  
the opportunity to supply you with the  
best ceiling fan available anywhere in the  
world.  
Blades  
Downrod  
Wiring  
Wall Control  
To register your fan, please visit:  
Save your receipt for proof of purchase.  
6
10  
12  
Maintenance  
& Cleaning  
Canopy  
Light Kit  
Operation  
Optional Bottom Cap  
Troubleshooting  
?
?
?
13  
14  
15  
17  
18  
19  
1
Download from Www.Somanuals.com. All Manuals Search And Download.  
M8509-01 • 04/16/15 • © 2013–2015 Casablanca Fan Company  
1.888.227.2178  
Tools Needed  
Pliers  
Wire Strippers  
Screwdrivers  
Ladder  
9/64” Drill Bit  
(optional)  
Power Drill  
(optional)  
If mounting to a support structure, you will also need these tools.  
3
Download from Www.Somanuals.com. All Manuals Search And Download.  
M8509-01 • 04/16/15 • © 2013–2015 Casablanca Fan Company  
O
34  
CEILING  
1.888.227.2178  
Mounting Options  
If you have a flat ceiling:  
Hang your fan by a standard downrod (included).  
Standard  
Mounting  
Support  
Structure  
Support  
Structure  
If you have an angled ceiling:  
Ceiling  
Outlet Box  
(required)  
1. You will need a longer downrod (sold separately).  
Angled  
Mounting  
2. If your ceiling angle is greater than 34°, you will  
also need an Angled Mounting Kit (sold separately).  
Ceiling  
Angled  
(required)  
Standard  
Mounting  
Style  
Outlet Box  
Mounting  
Style  
Use the three steps below to determine if your ceiling angle is greater than 34°  
1
2
3
34°  
PLACE  
SLIDE  
toward ceiling  
FOLD  
against wall  
on dotted line  
Guide Touches  
BOTH Ceiling & Wall  
Guide Touches  
but NOT Ceiling  
Wall  
Use Standard Mounting  
Use Angled Mounting  
to hang the fan from a  
to hang the fan  
from a flat ceiling.  
vaulted or angled ceiling.  
You need BOTH  
a Longer  
You need ONLY  
a Longer  
Downrod &  
an Angled  
Downrod  
Mounting Kit  
*most common  
4
Download from Www.Somanuals.com. All Manuals Search And Download.  
M8509-01 • 04/16/15 • © 2013–2015 Casablanca Fan Company  
1.888.227.2178  
Ceiling Bracket  
OFF  
For angled ceilings, point  
opening toward peak.  
Use wood screws  
Use machine screws  
(included) when securing  
to support structure with  
(provided with outlet  
box) when securing to  
approved electrical outlet existing ceiling fan-rated  
box. Drill 9/64” pilot holes  
outlet box. Make sure  
in support structure to aid  
it is securely installed  
in securing ceiling bracket and is acceptable for fan  
with hardware found in support of 31.8 kg (70 lbs)  
the  
hardware bag.  
or less.  
Make sure all four bumpers are  
If you are unable to do this,  
call Technical Support at  
1-888-227-2178.  
still attached.  
To avoid possible electrical shock, before  
installing your fan, disconnect the power by  
turning off the circuit breakers to the outlet  
box associated with the wall switch location.  
Refer to warning w.1 on pg. 2  
5
Download from Www.Somanuals.com. All Manuals Search And Download.  
M8509-01 • 04/16/15 • © 2013–2015 Casablanca Fan Company  
1.888.227.2178  
Blades  
Attach each blade to the motor housing  
using three blade screws and three  
blade washers, found in the  
hardware  
bag. Securely tighten after all three  
screws are attached.  
Note: The sticker on the blade should  
be facing downward.  
6
Download from Www.Somanuals.com. All Manuals Search And Download.  
M8509-01 • 04/16/15 • © 2013–2015 Casablanca Fan Company  
1.888.227.2178  
Downrod  
Standard  
skip to next page  
Downrod  
for ceilings 8-10’ high  
If you need a different downrod length follow these steps:  
Steps 1-5 to remove standard downrod pipe  
Longer  
Downrod  
for angled  
ceilings or  
ceilings 10’ or  
higher  
1
2
3
4
5
10  
9
8
7
6
Steps 6-10 to reassemble with new pipe  
7
Download from Www.Somanuals.com. All Manuals Search And Download.  
M8509-01 • 04/16/15 • © 2013–2015 Casablanca Fan Company  
1.888.227.2178  
Downrod (continued)  
Remove the pre-installed  
setscrew so that the downrod  
can be inserted.  
The wires can be cut, but  
leave at least 8” extending  
from the top of the downrod.  
Hand tighten the downrod (at  
least 4-5 full turns) until it stops.  
Tighten the setscrew  
with pliers. DO NOT  
HAND TIGHTEN.  
8”  
3/8”  
If the setscrew is not tightened  
securely, the fan may fall.  
8
Download from Www.Somanuals.com. All Manuals Search And Download.  
M8509-01 • 04/16/15 • © 2013–2015 Casablanca Fan Company  
11..888888..222277..22117788  
Downrod (continued)  
Put the wires and downrod through the canopy.  
Let the canopy sit loosely on top of the fan.  
DO NOT PICK THE FAN UP BY THE  
CANOPY OR WIRES. Place the downrod  
ball into the slot in the ceiling bracket.  
Note: Fan style may vary.  
9
Download from Www.Somanuals.com. All Manuals Search And Download.  
M8509-01 • 04/16/15 • © 2013–2015 Casablanca Fan Company  
1.888.227.2178  
Wiring  
Note: To connect the wires, hold  
the bare metal leads together and  
place a wire connector over them,  
then twist clockwise until tight.  
C
Receiver  
Using an orange wire connector  
from the hardware bag:  
Connect the 3 grounding wires  
(green, green/yellow stripe, or bare  
copper) coming from the ceiling,  
downrod, and ceiling bracket.  
green/yellow stripe  
Place the receiver on top of the downrod  
assembly as shown.  
Turn the splices upward and push them carefully back through the hanger bracket  
into the outlet box. Spread the wires apart, with the grounded wires on one side of  
the outlet box and the ungrounded wires on the other side of the outlet box.  
Refer to CAUTION c.1 on pg. 2  
10  
Download from Www.Somanuals.com. All Manuals Search And Download.  
M8509-01 • 04/16/15 • © 2013–2015 Casablanca Fan Company  
1.888.227.2178  
Wiring (continued)  
C
Using the orange wire connectors  
from the remote control hardware bag:  
Using the orange wire connectors  
from the hardware bag:  
Connect the yellow wire from  
the receiver to the black wire  
from the fan.  
Connect the black (ungrounded)  
wire from the ceiling to the black  
wire from the receiver.  
white  
Connect the blue wire from the  
receiver to the blue wire (or  
possibly black with white stripe  
wire) from the fan.  
Connect the white (grounded)  
wire from the ceiling to both the  
white wire from the receiver and  
the white wire from the fan.  
M
Turn the splices upward and push them carefully back through the hanger bracket  
into the outlet box. Spread the wires apart, with the grounded wires on one side of  
the outlet box and the ungrounded wires on the other side of the outlet box.  
Refer to CAUTION c.1 on pg. 2  
11  
Download from Www.Somanuals.com. All Manuals Search And Download.  
M8509-01 • 04/16/15 • © 2013–2015 Casablanca Fan Company  
1.888.227.2178  
Wall Control  
Screw  
Cut-Out  
Drywall  
Drill Holes  
Before  
Drywall  
Anchors  
Painters  
Tape  
Cover Plate  
Template  
Template  
Template  
After  
1. Tape the provided wall control  
template with painter’s tape at  
the desired installation area.  
2. Drill holes inside the four  
corners of the template.  
Note: Make sure the wall  
control template is level before  
proceeding to the next step.  
1. Using a 9/64 drill bit, drill a hole  
in each screw cut-out on the wall  
control template.  
2. Using a hammer, tap a drywall  
anchor found in the wall control  
hardware bag into each hole  
until the drywall anchor is flush  
with the wall.  
1. Using a drywall punch saw,  
cut out the interior shape of  
the template using one of  
the four drilled corners as a  
starting point.  
2. Remove the template and the  
cut-out section of drywall.  
1. Insert the wall control into the  
dry wall cut out.  
2. Align the screw holes in the wall  
control with the drywall anchors.  
3. Install the cover plate using  
a Phillips Head screwdriver  
to secure the two cover plate  
screws found in the wall control  
hardware bag through the wall  
control and into the drywall  
anchors.  
If you are using a outlet box for wall control installation, the wires coming from the wall  
control must be grounded using the attached green wire. If not placed in an outlet box, cap  
the green wire coming from the wall control with an included wire nut.  
This device complies with Part 15 of the FCC Rules. Operation is subject to the following  
conditions: (1) this device may not cause harmful interference, and (2) this device must accept  
any interference received, including interference that may cause undesired operation.  
12  
Download from Www.Somanuals.com. All Manuals Search And Download.  
M8509-01 • 04/16/15 • © 2013–2015 Casablanca Fan Company  
1.888.227.2178  
Canopy  
Screw  
Holes  
Position the canopy so that, when  
lifted into place, the canopy fits into  
the hanging bracket as shown.  
Lift the canopy into place so that  
the screw holes are aligned.  
Insert the two canopy screws  
found in the  
hardware bag.  
13  
Download from Www.Somanuals.com. All Manuals Search And Download.  
M8509-01 • 04/16/15 • © 2013–2015 Casablanca Fan Company  
1.888.227.2178  
Light Kit  
Globe  
Socket Plug  
Bulb  
Remove the socket plug from the  
light bulb socket and put aside for  
safe-keeping. If you ever decide  
to install the optional bottom cap,  
you will need the socket plug.  
Install a halogen bulb in the  
socket. When necessary, replace  
with bulbs of the same type  
and wattage.  
Position the indentations in the  
outer rim of the globe so they line  
up with the tabs on the inside of  
the fan light kit. Carefully lift the  
globe up inside the light kit as far  
as it will go, then rotate the globe  
clockwise until it is held tightly in  
place by the three tabs.  
See next page for fan  
operation instructions.  
When installing a halogen bulb, carefully cut off  
the end of the plastic sleeve packaging and hold the  
bulb by the plastic sleeve to screw it into the socket.  
Note: In compliance with US federal energy regulations, this ceiling  
fan contains a device that restricts its light output. Exceeding the  
wattage limit marked on the MAX wattage sticker affixed to the  
light socket(s) may result in fire hazard or improper operation.  
14
Download from Www.Somanuals.com. All Manuals Search And Download.  
M8509-01 • 04/16/15 • © 2013–2015 Casablanca Fan Company  
1.888.227.2178  
Operation  
Battery  
Battery  
Holder  
ON  
Battery  
Door  
Before operating the wall control, press on the  
battery door to eject it. Unscrew the battery  
holder. Insert the battery, found in the control  
hardware bag, with the positive (+) side facing  
downward. Reinstall the battery holder and  
reinsert the battery door into the wall control.  
The remote transmitter is already paired  
to the receiver and ready to use.  
Note: If you would like to operate  
multiple fans or multiple remotes,  
or if your remote is not working,  
please see the Troubleshooting  
section at the end of this manual.  
15  
Download from Www.Somanuals.com. All Manuals Search And Download.  
M8509-01 • 04/16/15 • © 2013–2015 Casablanca Fan Company  
1.888.227.2178  
Operation (continued)  
Reverse  
Button  
The Safe-Exit Program gives  
you about thirty seconds of  
light when you turn the lights  
off to exit the room before the  
(Low)  
(a)  
Fan  
Speed  
Fan  
Speed  
lights go out.To use Safe-Exit:  
• Press the fan power button  
off for at least three seconds to  
initiate the Safe-Exit Mode.  
(High)  
• The lights will flash for visual  
confirmation.  
Lights  
Down  
Lights  
Up  
• The lights will stay on 50%  
brightness for 20 seconds and  
then begin to dim. After a total  
of 30 seconds, the lights will be  
completely off.  
(b)  
Reverse  
Fan  
Note: For CFL lighting, the lights  
will stay on 100% brightness  
for 30 seconds. After a total of  
30 seconds, the lights will be  
completely off.  
Power  
Battery  
Holder  
Quickly press the up or down arrow to turn the lights off  
and on. Hold the up or down arrow to raise or dim the light  
level. The reverse button changes the direction that the  
blades turn. The power button turns the fan off and on.  
The reverse button on the wall  
control changes the air flow  
pattern. In warm weather, use  
(a) downward air flow pattern.  
In cold weather, use (b) upward  
air flow pattern.  
Dimming Mode: To enable dimming, you must first set  
your remote to Dimming Mode. To toggle Dimming  
Mode on or off, hold down the Fan Power button while  
pressing the Light Down arrow twice.  
16  
Download from Www.Somanuals.com. All Manuals Search And Download.  
M8509-01 • 04/16/15 • © 2013–2015 Casablanca Fan Company  
1.888.227.2178  
Optional Bottom Cap  
Bottom  
Cap  
Globe  
OFF  
Socket Plug  
Be sure to turn off  
power to the fan  
before installing the  
bottom cap.  
Carefully rotate the globe  
Install the socket plug.  
Position the indentations in the  
counterclockwise until it comes  
loose from the tabs and lower it  
from inside the light kit. Remove  
the bulb. Put the globe and bulb  
aside for safe-keeping.  
outer rim of the bottom cap so  
they line up with the tabs on  
the inside of the fan light kit.  
Carefully lift the bottom cap  
up inside the light kit as far as  
it will go, then rotate the cap  
clockwise until it is held tightly  
in place by the three tabs.  
17  
Download from Www.Somanuals.com. All Manuals Search And Download.  
M8509-01 • 04/16/15 • © 2013–2015 Casablanca Fan Company  
1.888.227.2178  
Maintenance & Cleaning  
Globe  
OFF  
Be sure to turn off  
power to the fan  
before performing  
any maintenance or  
relamping.  
Changing the bulbs - carefully rotate the globe  
counterclockwise until it comes loose from  
the tabs and lower it from inside the light kit.  
Unscrew the bulb and replace it with a bulb of  
the same type and wattage. Reinstall the globe.  
Cleaning the fan - use soft brushes or  
cloths to prevent scratching. Cleaning  
products may damage the finishes.  
18  
Download from Www.Somanuals.com. All Manuals Search And Download.  
M8509-01 • 04/16/15 • © 2013–2015 Casablanca Fan Company  
1.888.227.2178  
Troubleshooting  
Remote does not work  
Excessive wobbling  
Fan doesn’t work  
Make sure the battery is installed  
correctly.  
• Tighten all of the blade  
screws until they are snug.  
• Press a fan speed button (1-4).  
AUTHORIZED SERVICE  
CENTERS  
For the most updated list of  
Casablanca Authorized Service  
Centers, visit  
• Check the wall control battery.  
• Install a new battery.  
• Turn the power off, support  
the fan carefully, and check  
that the hanger ball is  
properly seated.  
Check the circuit breaker to  
ensure the power is turned on.  
If the remote still does not  
work, you may need to pair  
your remote. To prevent faulty  
operation, please disconnect  
power (at the wall switch,  
call toll free 1-888-227-2178.  
• Make sure the blades spin freely.  
• Use the provided balancing  
kit and instructions to balance  
the fan.  
• Turn off power from the circuit  
breaker, then loosen the canopy  
and check all the connections  
according to the wiring diagram  
on page 10-11.  
breaker, or fan) from all other  
ceiling fans within range while  
pairing. To pair: cycle power  
to the fan by turning power off  
and back on at the wall switch  
(or circuit breaker if necessary).  
Within three minutes, press and  
hold both the Fan Off button and  
the 4 button for four seconds to  
pair the remote. If applicable, the  
fan will turn on and the lights  
will flash and stay on to indicate  
successful pairing.  
Lights will not dim  
• To enable dimming, you  
must first set your remote to  
Dimming Mode. To toggle  
Dimming Mode on or off, hold  
down the Fan Power button  
while pressing the Light Down  
arrow twice.  
Lights dim when turned on or  
do not turn on at all.  
Make sure the wattage of the  
light bulbs installed matches  
the specifications on the  
light sockets (see page 18 for  
instructions on changing the  
bulbs).  
Ensure each bulb you are using  
supports dimming.  
Noisy Operation  
• Tighten the blade screws until  
they are snug.  
Check to see if any of the  
blades are cracked. If so, replace  
all of the blades.  
19  
Download from Www.Somanuals.com. All Manuals Search And Download.  
M8509-01 • 04/16/15 • © 2013–2015 Casablanca Fan Company  
1.888.227.2178  
Troubleshooting (continued)  
Installing Multiple Fans with Independently Operating Remote Controls  
Installing One Fan Operating on Multiple Remote Controls  
To install multiple fans with independently operating remote controls, there is no need to  
perform any pairing procedures. Each set of receiver/transmitter is already paired. Simply  
install each receiver into a fan and use the appropriate transmitter to operate each fan.  
To have multiple remote controls operate one fan, you must pair each additional transmitter  
to the receiver in the fan. The transmitter that shipped with your fan is already paired.  
Note: To prevent faulty operation, please disconnect power (at the wall switch,  
breaker, or fan) from all other ceiling fans within range while pairing.  
If your remote is not working, see the “Remote does not work” section on the previous page.  
For each additional transmitter, cycle power to the fan by turning power off and back on at  
the wall switch (or circuit breaker if necessary). Within three minutes, press and hold both  
the Fan Off button and the 4 button for four seconds to pair the remote. If applicable, the  
fan will turn on and the lights will flash and stay on to indicate successful pairing.  
Installing Multiple Fans Operating on a Single Remote Control  
“Unpairing” Procedure for Faulty Operation of Remote Controls  
X
To have multiple fans operated by a single remote control, you must pair the transmitter to each  
additional receiver. The receiver that shipped with your fan is already paired to the transmitter.  
If a transmitter is mistakenly operating a fan, you need to “unpair” the transmitter from that  
fan’s receiver. The “unpairing” procedure is the same as the pairing procedure.  
Note: To prevent faulty operation, you MUST disconnect power (at the wall switch,  
breaker, or fan) from all other ceiling fans within range while pairing each fan.  
Note: To prevent faulty operation, you MUST disconnect power (at the wall switch,  
breaker, or fan) from all other ceiling fans within range while “unpairing” a fan.  
For each additional fan, ensure that a compatible receiver is installed. Disconnect power from all  
other fans while pairing. To pair: cycle power to the fan by turning power off and back on at  
the wall switch (or circuit breaker if necessary). Within three minutes, press and hold both  
the Fan Off button and the 4 button for four seconds to pair the remote. If applicable, the  
fan will turn on and the lights will flash and stay on to indicate successful pairing.  
Disconnect power from all other fans while “unpairing.” Then, cycle power to the fan you  
wish to “unpair” by turning power off and back on at the wall switch (or circuit breaker  
if necessary). Within three minutes, press and hold both the Fan Off button and the 4  
button for four seconds to “unpair” the remote. If applicable, the fan will turn off and the  
lights will flash and turn off to indicate successful “unpairing.”  
20  
Download from Www.Somanuals.com. All Manuals Search And Download.  
M8509-01 • 04/16/15 • © 2013–2015 Casablanca Fan Company  

BenQ Computer Monitor FP91G User Manual
Blackberry Cell Phone 8700 User Manual
Bosch Appliances Music Mixer PLE 1MEXX0 XX User Manual
Broilmaster Charcoal Grill C3 1 User Manual
Califone Video Game Controller MCFEW1 D User Manual
Canon Digital Camera 240 HS User Manual
Casio Watch 1935 1 User Manual
Chaney Instrument Thermometer 3128 User Manual
Channel Plus Home Security System 7100 User Manual
Chauvet Utility Trailer A User Manual