Capresso Espresso Maker 13214 User Manual

Impressa Z5  
Fully Automatic  
Coffee & Espresso Center  
with Clearyl Water Care System  
Operating Instructions  
and Warranty  
Customer Service 1-800-220-5701  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Notice: Your Impressa Z5 has a 3-prong grounded plug. To  
reduce the risk of electrical shock this plug will fit in an outlet  
only one way. If the plug does not fit in the outlet contact a  
qualified electrician. DO NOT modify the plug in any way.  
JURA-CAPRESSO  
Jura was founded in 1931 in Switzerland. Capresso was  
founded in 1994 in the USA. Both companies have joined  
forces in the US to bring you the finest Fully Automatic  
Coffee Centers available anywhere. With innovative and  
user-friendly features, high quality materials, clear instruc-  
tions and superb customer service, we are sure you will  
experience the best coffee, espresso, cappuccino or latte  
you have ever had. We hope you will enjoy your new Fully  
Automatic Coffee Center and will recommend it to your  
friends. For more information about our products visit our  
CAUTION  
This appliance is for household and commercial use. Any  
servicing other than cleaning and user maintenance should  
be performed by an authorized service representative.  
Do not immerse base in water or try to disassemble.  
To reduce the risk of fire or electric shock, do not remove  
the base. No user serviceable parts inside. Repair should  
be done by authorized service personnel only.  
Michael Kramm, President  
Check voltage to be sure that the voltage indicated on the  
name plate agrees with your voltage.  
Never use warm or hot water to fill the water container!  
Use cold water only!  
Customer Service  
1-800-220-5701  
Keep your hands and the cord away from hot parts of the  
appliance during operation.  
Mon-Thu 9AM 9PM Fri 9AM 8PM Sat 9AM 5PM  
Eastern Standard Time.  
Never clean with scouring powders or hard implements.  
email: contact@capresso.com  
Jura-Capresso LLC.  
81 Ruckman Road, Closter, NJ 07624  
201-767-3999 Fax: 201-767-9684  
3.  
Download from Www.Somanuals.com. All Manuals Search And Download.  
1. Cover lid (spring loaded)  
2. Bean container safety lid (Fig. 4)  
3. Bean container  
4. Operating panel (Fig. 3)  
5. Dual coffee spout (adjustable height)  
6. Hot water spout  
7. Cup illumination (behind coffee spouts)  
8. Used coffee container  
9. Removable tray  
1.  
2.  
3.  
4.  
5.  
Fig. 1  
18.  
17.  
19.  
16.  
15.  
6.  
10. Stainless steel grid  
11. Removable drawer  
12. Thermal milk container  
13. Auto cappuccino system  
14. Main power switch (Fig. 3a)  
15. Water tank  
7.  
8.  
14.  
16. Water tank lid  
17. Lid for ground coffee (Fig. 4)  
18. Grind fineness selector (Fig. 4)  
19. Lid for service connector  
9.  
10.  
11.  
Fig. 2  
13.  
12.  
a
8. Used Coffee Container  
9. Tray  
d
10. Grid  
11. Drawer  
a. Measuring scoop  
b. Cleaning tablets  
c
b
c. Water hardness indicator strip  
d. Clearyl Water cartridge* (unpacked)  
* Attention: The Water Filter Cartridge should be in a pouch.  
If your machine comes with the cartridge installed, it is not a new machine!  
Call customer service 1-800-220-5701.  
4.  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Rotary  
Dial  
On/Off  
Rinse  
Main power switch  
COFFEE READY  
Milk  
Cappuccino Special Hot  
1-Cup 2-Cup 1-Cup 2-Cup  
Espresso Coffee  
Latte  
Coffee Water  
Fig. 3  
Fig. 3a  
Dual Fixed  
Spouts  
Lid for  
ground  
coffee  
Grind  
selector  
Venting tip  
Bean  
container  
safety lid  
Dial  
Component  
Fig. 4  
Fig. 5  
Fig. 5a  
Fig. 5b  
5.  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Milk & Froth  
(Cappuccino)  
Elbow hose  
fits inside  
straight  
Milk only  
(Latte)  
Gap  
hose  
Steam only  
(Rinsing)  
Milk  
Nozzle  
Coffee  
Nozzle  
Fig. 5c  
Fig. 5d  
Fig. 5e  
Fig. 5f  
Fig. 6  
x
Fig. 6a  
Fig. 7  
Fig. 8  
Fig. 9  
Fig. 10  
6.  
Download from Www.Somanuals.com. All Manuals Search And Download.  
7.  
Table of Contents  
Chapter  
Page  
Chapter  
Page  
Important Safeguards..........................................................2  
Jura-Capresso / Address Information.................................3  
Illustrations.......................................................................47  
9.  
One-Touch Beverage Buttons.................................14  
10. Brewing Coffee and Espresso..............................14  
11. Overriding Strength and Cup Size during Brewing....15  
12. Auto Cappuccino System .......................................15  
13. Cappuccino and Latte...........................................16  
14. Overriding the Cappuccino Settings.......................16  
15. Hot Milk and Hot Chocolate.................................17  
16. Special Coffee Button .............................................17  
17. Cappuccino Rinsing Cycle......................................17  
18. Cappuccino Cleaning Cycle....................................18  
19. Cleaning the Dial Component .................................18  
20. Using Pre-Ground Coffee .....................................19  
21. Using Hot Water.....................................................19  
22. Water Care...............................................................19  
23. Clearyl Water Filter Cartridge...............................20  
a Installing and Activating the Clearyl Cartridge ..20  
1.  
2.  
3.  
Product Warranty Registration ................................10  
Operating Instructions / Customer Service.............10  
WELCOME TO THE IMPRESSA Z5 .....................10  
a. "Crema Coffee" and Pressure Brewing...............10  
b. Different Coffee Drinks........................................11  
c. Coffee Facts ........................................................11  
Please Don't / Please Do ......................................11  
Factory Settings ......................................................12  
PREPARING MACHINE FOR THE FIRST TIME....12  
a. Filling the Water Tank ..........................................12  
b. Filling the Bean Container...................................12  
c. Turning the Machine On......................................13  
Adjusting the Grinder ..............................................14  
DAILY PREPARATION............................................14  
4.  
5.  
6.  
7.  
8.  
b. Replacing the Clearyl Cartridge ..........................20  
8.  
Download from Www.Somanuals.com. All Manuals Search And Download.  
24. Water Hardness Monitor .........................................21  
a. Changing the Water Hardness Monitor...............22  
25. Changing Pre-Set Cup Sizes...................................22  
25.1 1- and 2-Cup Buttons: Special Cup Button .........22  
25.2 Cappuccino Button...............................................22  
25.3 Milk Button............................................................23  
25.4 Hot Water Button..................................................23  
26. Programming / Maintenance................................23  
1. PRODUCT WARRANTY REGISTRATION  
Please read the enclosed product registration form now. Fill it  
out and mail or fax it to us within two weeks after purchasing  
your machine or register online through our website:  
hot frothed and hot steamed milk and delivers up to 16 oz. hot  
water all with a push of a button.  
The two-step pressure brewing system well known in com-  
mercial applications was adapted and refined by Jura coffee  
specialists and is the trademark of each Jura-Capresso coffee  
Important: This registration is part of your warranty (chapter 35). center. This Pre-Brew Aroma-System ensures optimal coffee  
extraction and will finish every cup with a rich layer of "crema" –  
2. OPERATING INSTRUCTIONS / CUSTOMER SERVICE  
Thank you for choosing this Jura-Capresso product.  
Please study these Operating Instructions carefully before  
using your new machine. We highly recommend viewing the  
enclosed DVD. Select Z5.  
Also included is a Quick Reference Guide. Keep it next to  
your machine until you are familiar with all functions.  
For further information please call our TOLL FREE number:  
1-800-220-5701, Mon-Fri 9AM 9PM & Sat 9AM 5PM  
Eastern Standard Time. If you call at any other time please  
leave a message including your telephone number and a time  
you can be reached. You can send us a FAX at: 201-767-9684  
or EMAIL us at contact@capresso.com.  
proof for perfectly pressure brewed coffee and espresso. Your  
Z5 grinds, tamps and brews completely automatically. The inte-  
grated solid steel conical burr grinder grinds beans to the pre-  
ferred fineness. A separate funnel lets you use pre-ground coffee.  
All coffee, water and steam functions are programmable to your  
own personal taste. Make any size cup between 1 and 16 oz.  
With two stainless steel lined Thermo-Block heating systems  
the Z5 is always ready to produce any kind of coffee drink with  
no downtime. The hot water function lets you prepare tea and  
other beverages in seconds.  
All important functions such as water level, bean container,  
used coffee container and water filter are monitored automatically.  
You can program the machine to turn itself on and off, change  
the language and check how many cups of coffee you made.  
You can create your own names for any of the beverage buttons.  
The beautiful, functional heavy duty die-cast metal front with its  
stainless steel appointments, cup illumination and informative  
LED display make the Z5 the most sophisticated and versatile  
Super Automatic Coffee Center available today.  
Please note: if you lose your Operating Instructions or the Quick  
Reference Guide, you can download a printable copy from our  
3. WELCOME TO THE IMPRESSA Z5  
This fully automatic coffee/espresso/cappuccino center is com-  
pletely programmable and extremely user friendly. Your Impressa  
Z5 prepares a cup of cappuccino or latte at a push of a button  
without moving your cup, it brews one or two cups of crema  
coffee or espressos at a time, it produces unlimited amounts of  
Enjoy your Impressa Z5!  
3a. "CREMA COFFEE" AND PRESSURE BREWING  
According to the majority of coffee experts, grinding, tamping  
10.  
Download from Www.Somanuals.com. All Manuals Search And Download.  
and brewing under high pressure is the ideal extracting process  
for maximum flavor and aroma. Your Jura-Capresso automatic  
coffee center will always produce espresso and coffee with a  
thick, foamy layer called "crema." The crema traps the fine aro-  
matics and the light gaseous flavors that register on the palate.  
The high pressure and the short brewing time prevent the  
extraction of bitter oils and release less caffeine than any other  
brewing method. You will always make the absolute freshest  
and most aromatic cup of coffee. This is the reason why many  
European restaurants and hotels serve only fresh pressured  
brewed coffee. Experiment with your new machine and prepare  
yourself the best and most enjoyable cup of coffee!  
the result of the amount of coffee in relation to the amount of  
water. The longer a bean is roasted, the less caffeine it has.  
Arabica and Robusta are two genetically different kinds of  
beans. "Arabica" beans have more flavor and a little less caffeine  
than "Robusta" beans which are mostly used in lower priced  
coffees and instant coffees.  
Espresso is not a bean, it's the way the coffee is roasted and  
prepared. Typical US espresso roasts result in darker beans with  
an oily surface. European espresso roasts are medium brown  
with no or very little oils on the surface.  
All Display Messages Are Shown in RED  
4. PLEASE, DON’T... (or you void your warranty protection):  
Never pull out the drawer during the brewing process. Only  
pull the drawer when the display instructs you or when the  
display shows COFFEE READY.  
Never fill instant coffee into the bean container or ground coffee  
funnel; it can damage the brewing chamber.  
Never fill sugar coated coffee beans into the bean container.  
Never fill frozen beans into the bean container. If you store  
beans in the freezer, let them thaw 3 to 4 hours before filling  
them into the bean container.  
Never fill anything other than coffee beans into the bean  
container (no chocolate, rice, nuts, spices, etc.)  
Never fill anything but fresh, cold clean water into the water  
container, except when decalcifying (chapter 29).  
Never use mineral or carbonated water. You can use tap  
water, bottled water, spring water, distilled water and reverse  
osmosis water.  
3b. DIFFERENT COFFEE DRINKS  
Here are some guidelines for the most popular coffee drinks:  
Ristretto: 1/2 to 1 oz. of coffee. Sweeten to taste.  
Espresso: 1 to 2 oz. coffee. Sweeten to taste.  
Double Shot: 3 to 4 oz. of coffee. Sweeten to taste.  
Crema Coffee: 5 to 8 oz. of coffee.  
Cappuccino: Espresso plus 3 to 4 oz. of hot frothed milk.  
Latte: Espresso plus 3-5 oz. steamed milk with little or no froth.  
Café Mocha: Make Espresso then add chocolate syrup to the  
milk before frothing/steaming.  
TIP: Experiment with the size of your milk based drinks. For  
stronger coffee taste add more coffee, for more milk taste add  
more frothed milk.  
3c. COFFEE FACTS  
Caffeine is tasteless. A "strong" coffee or espresso is mostly  
11.  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Never repair or open the machine yourself. All repairs should  
be performed only by an authorized service center.  
Time format .................... AM/PM (chapter 26.13)  
Volume ml/oz.................. in ounces (chapter 26.13)  
Language ....................... English (chapter 26.12)  
Time ............................... Not set (chapter 26.7)  
Unit On (Auto-On) ......... Not set (chapter 26.8)  
PLEASE, DO...  
Fill water tank with fresh, cold water only.  
Remove any foreign particles (small stones) from coffee beans.  
Let frozen beans thaw 3 to 4 hours before pouring them into  
the bean container.  
CUP ILLUMINATION (Fig. 1,7)  
The cup illumination adds a dramatic touch to brewing coffee.  
Providing the main power switch is on, you can activate the cup  
illumination for 1 minute by pressing any button.  
5. FACTORY SETTINGS  
Each machine leaves the factory with the following settings:  
Milk Button..................... 20 seconds  
Cappuccino Button ........ 15 seconds milk, 3 oz. coffee, strength  
NORMAL, temperature HIGH:  
Special Coffee Button.... 3 oz., XSTRONG, HIGH  
Hot Water Button ........... 6 oz.  
1 Espresso Button.......... 1.5 oz., STRONG, HIGH  
2 Espresso Button.......... 3.0 oz., STRONG, HIGH  
1 Coffee Button.............. 5.0 oz., NORMAL, HIGH  
2 Coffee Button.............. 10.0 oz., NORMAL, HIGH  
6. PREPARING THE MACHINE FOR THE FIRST TIME  
Make sure all accessories, literature and any other items are  
removed from the bean container and the water tank.  
DO NOT install the Clearyl water filter now. (chapter 23)  
Make sure the machine sits on an even, flat surface and the  
drawer, tray and used coffee container are inserted (Fig.1, Fig. 2).  
Plug-in machine.  
6a. FILLING THE WATER TANK  
Please note: Only use fresh, cold water. Never fill water tank  
with carbonated water, milk or any other liquid.  
Open the Water Tank Lid, remove the water tank, rinse and fill  
with fresh, cold water (Fig. 7).  
Replace water tank and make sure that the two slots are  
engaged over the two hooks to secure the tank properly.  
Close lid.  
Please note: You can change all above presets (chapter 26).  
You can also override the strength and the cup size before/during  
actual brewing. Overriding will not change the preset values.  
Filter................................ No (not installed) (chapter 23)  
Hardness Level............... 10º (chapter 24)  
Auto-Off.......................... 2 Hours (chapter 26.9)  
Grinder Fineness ............ Middle position (chapter 7)  
Economy ........................ NO SAVE (chapter 26.6)  
6b. FILLING THE BEAN CONTAINER  
Please note: To insure that your conical burr grinder will work  
for a long time, do not use it with any kind of coated or flavored  
12.  
Download from Www.Somanuals.com. All Manuals Search And Download.  
beans (all coating and flavors contain sugar or sugar substances).  
not change the taste of your coffee). Then fill the beans into the  
Such coating can damage the burrs. Using such beans voids the bean grinder. Now beans will feed into the burrs more easily.  
warranty. Have your coffee store grind the sugar coated beans  
and use as described in the ground coffee funnel (chapter 20).  
Please note: If you like flavored coffees we recommend to add  
flavors to your coffee after brewing. This way you can use your  
regular coffee beans in the bean container. Adding the flavors  
after brewing lets you control the intensity much better than with  
6c. TURNING THE MACHINE ON  
Press the Main Power Switch at the bottom left in front of  
the power cord (Fig. 3a). The On/Off button on top of the  
machine illuminates (Fig. 3).  
Push the On/Off button on top of the machine. The display  
will illuminate. PRESS RINSE. The Rinse Button (Fig. 3)  
pre-flavored coffee. Your local coffee store typically carries a  
illuminates in blue.  
variety of flavors.  
Place one cup underneath the Hot Water Spout (Fig. 1,6) and  
one cup underneath the Auto Cappuccino System (Fig. 1,13).  
Push the Rinse Button. SYSTEM FILLS. The machine starts  
pumping water into the system, until some water will come  
through the cappuccino nozzle and the hot water spout.  
During this operation the Rinse Button flashes.  
WELCOME TO JURA  
UNIT IS HEATING  
PRESS RINSE  
Place a cup underneath the Dual Coffee Spouts (Fig. 1,5) and  
push the Rinse Button. The machine will pump a bit of hot  
water through the coffee spouts and will stop automatically.  
COFFEE READY  
Open the Cover Lid (Fig.1,1).  
Please note: The cover lid is spring activated. Push slightly  
upwards on the right side finger indent and the lid will auto-  
matically open.  
Remove the see-through Bean Container Safety Lid (Fig. 4).  
Make sure the bean container is empty and clean. Fill beans  
into the bean container. Replace the Safety Lid.  
Attention: the machine will not work without the Safety Lid in  
place. Close the Cover Lid.  
Frozen Beans: Thaw 3 to 4 hours before adding to bean  
container. This prevents moisture from seeping into the grinder.  
Oily Beans: Beans with an oily surface tend to stick together.  
This may prevent a continuous flow of beans from the bean  
container into the burrs. As a result the grinder does not grind  
enough coffee and you might get weak or no coffee at all.  
Stir the beans in the bean container just before grinding.  
Alternatively, you can also pour the beans in an open bowl and  
let them sit for about 5 hours. The oils will evaporate (this will  
Place a cup underneath the Dual Coffee Spout and push the  
1-cup Espresso Button (Fig. 3). The machine starts grinding  
and brewing. The display might show FILL BEANS.  
Push the 1-cup Espresso Button again. Discard the first two  
cups of coffee. Your next cup will be perfect.  
Important: After the initial set up we recommend to leave the  
Main Power Switch on for the next 24 hours. This will give the  
13.  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Z5 enough time to completely charge its internal back-up battery.  
When fully charged, the internal battery will back up the clock for  
up to eight weeks.  
9. ONE-TOUCH BEVERAGE BUTTONS (Fig. 3)  
The Z5 has eight beverage buttons. The first three buttons on  
the left side produce beverages coming out of the Auto-  
Cappuccino-System on the left side of the machine.  
The forth button on the left side produces hot water through the  
hot water spout (Fig.1,6).  
The four buttons on the right side produce different kinds of  
coffee beverages through the Dual Coffee Spout in the middle.  
All beverage buttons are pre-set to certain volumes and  
strengths (chapter 5).  
7. ADJUSTING THE GRINDER  
You can adjust the grinder to the roast of your coffee.  
We recommend the following:  
Light roast: use a finer adjustment.  
Dark roast: use a coarser adjustment.  
Open the Cover Lid (Fig. 1,1)  
While the grinder is running, turn the Grind Selector to  
the desired position (Fig. 4).  
Coarser: Turn the dial towards the bean symbol.  
Finer: Turn the dial away from the bean symbol.  
Important: The grinding grade can only be adjusted while  
the grinder is actually grinding.  
10. BREWING COFFEE AND ESPRESSO  
(1 Espresso, 2 Espressos, 1 Coffee, 2 Coffees)  
The four buttons on the right side of the Operating Panel (Fig. 3)  
deliver coffee through the Dual Coffee Spouts (Fig. 1,5).  
Place one or two cups underneath Dual Coffee Spouts and  
push the desired button.  
The Impressa Z5 will grind, tamp and then brew the coffee. It  
uses a 2-step brewing process (Pre-Brew Aroma System).  
First, it moistens the ground coffee (pre-brew phase), pauses  
for a few seconds, and then starts the brewing process. The  
display will show the name of the button you pushed, e.g.  
1 ESPRESSO and then the strength which was programmed  
for this button, e.g. STRONG. The brewing process stops  
automatically as soon as the programmed volume of coffee is  
produced. When the display shows COFFEE READY you can  
brew the next cup of coffee.  
8. DAILY PREPARATION  
We recommend filling the water container every morning with  
fresh, cold water. This will enhance the taste of your coffee.  
Make sure the Main Power Switch is on (Fig. 3a). In this case  
the On/Off button on top is illuminated.  
Push the On/Off button on top of the machine. The display  
shows MACHINE IS HEATING. After approx. 2 minutes the  
display shows RINSE.  
Push the Rinse Button (Fig. 3). Hot water will warm up all  
internal parts and pump through the coffee spouts. The water  
will be caught in the drawer underneath. The rinse cycle stops  
by itself and the display reads: COFFEE READY. You are now  
ready to make coffee.  
Very Important: After the brewing stops the Z5 will discard the  
used coffee. Please do not try to pull out the drawer (Fig. 2)  
during this time. It can seriously damage the machine. There  
14.  
Download from Www.Somanuals.com. All Manuals Search And Download.  
is no need to pull out the drawer unless you see the message  
EMPTY GROUNDS (chapter 27.4).  
per cup, e.g. if you choose 7 oz. the Z5 will actually brew a total  
of 14 oz.  
Please note: You can always stop the brewing process by  
pressing the Rotary Dial or any of the eight beverage buttons.  
This will not affect the pre-set values.  
Example: The 1-cup Espresso button is programmed to  
STRONG and approx. 1.5 OZ.  
Assume you want to use this button to make a MILD 4 oz. cup.  
COFFEE READY  
Turn the Rotary Dial until the display shows MILD, push the  
1-cup Espresso button. The Z5 starts grinding and displays MILD.  
When it starts brewing, turn the Rotary Dial until the display  
shows 4.0 OZ.  
11. OVERRIDING STRENGTH AND CUP SIZE DURING  
BREWING.  
With the Z5s override feature you are always able to change  
certain settings just before brewing without affecting the pre-set  
values. This is a great feature if you are in the mood for a different  
kind of coffee which is not programmed. (For changing pre-set  
values see chapter 25 and 26).  
The next time you use the 1-cup Espresso button it will produce  
the pre-set value STRONG, 1.5 oz..  
For the four coffee buttons on the right side, you can override  
the strength and the coffee volume.  
COFFEE READY  
12. AUTO CAPPUCCINO SYSTEM  
The three buttons on the left side of the operating panel produce  
beverages which are brewed through the Auto Cappuccino  
System (Fig. 1,13). We recommend watching the DVD.  
First turn the Rotary Dial. It will display five different strength  
settings XMILD, MILD, NORMAL, STRONG, XSTRONG.  
Select the one you like and then push one of the four coffee  
buttons. Once you pushed the coffee button, the display will  
again show the strength setting you just selected.  
You can now change the coffee volume.  
Turn the Rotary Dial and the display will show the coffee volume  
in oz. Turn the dial until the desired volume is set.  
Please note: When you select a different strength you must  
push one of the coffee buttons within the next 3 seconds,  
otherwise the Z5 reverts back to COFFEE READY.  
Please note: When you push one of the double cup buttons and  
you change the volume, the display will always show the volume  
The Auto Cappuccino System has the following components:  
Dual fixed spouts coming out of the machine, (Fig. 5).  
Dial Component with the small removable venting tip (Fig. 5a).  
The removable Dual Nozzle system. The long system is already  
attached to the machine. If you use tall cups or glasses you  
can replace the long Dual Nozzle System with a shorter one  
(Fig. 5b). It is included in the Welcome Pack.  
The nozzle that is positioned closer to the machine will deliver  
coffee, this is called the Coffee Nozzle (Fig. 5e). The nozzle in  
the front will deliver hot steamed and frothed milk, this is  
called the Milk Nozzle (Fig. 5e).  
15.  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Please note: There is a gap between the Coffee Nozzle and  
the fixed coffee spout. (Fig. 5e) This is necessary to assure  
proper coffee flow.  
MILK 15 SEC.  
Hot frothed milk is automatically delivered into your cup.  
Frothing stops automatically.  
Please note: The Milk Nozzle should always be tightly connected  
to the Dial Component (Fig. 5e) and the venting tip needs to  
be clean and inserted to assure proper frothing action (Fig. 5a).  
3 OZ. NORMAL. Now the Z5 automatically adds high pressure  
brewed coffee and then stops automatically.  
COFFEE READY  
Tip: If you use a glass cup you can actually see how much froth  
is created and how the coffee goes through the froth and sits  
underneath the layer of milk froth. Slightly stir to distribute the  
coffee evenly into the hot milk.  
A Thermal Milk Container with lid (Fig. 6a).  
Two stainless steel rods and two flexible hoses (Welcome Pack).  
13. CAPPUCCINO AND LATTE  
Make sure the Auto-Cappuccino-System is installed properly  
(Fig. 5a 5e).  
14. OVERRIDING THE CAPPUCCINO SETTINGS  
As with the other buttons you can always override the pre-sets  
of the cappuccino button.  
Fill cold milk into the Thermal Milk Container and assemble the  
two stainless steel rods with the lid as shown in Fig. 6 .  
Example: Lets override  
Attach the short flexible hose to the rod and insert the connector  
into the Dial Component (Fig. 6a).  
the coffee strength from NORMAL to XSTRONG,  
the milk frothing time from 15 seconds to 10 seconds,  
the coffee volume from 3 OZ to 2 OZ.  
Cappuccino: The Dial points to the cup with saucer. Hot milk  
COFFEE READY  
and milk froth will be created (Fig. 5f).  
Place a cup underneath the Dual Nozzle System.  
Turn the Rotary Dial until the display shows XSTRONG.  
Push the Cappuccino button.  
When the display shows MILK 15 SEC, turn the Rotary Dial  
until the display shows 10 SEC.  
When the coffee starts brewing turn the Rotary Dial again until  
the display shows 2 OZ.  
Please note: You can stop frothing by pushing any of the bever-  
age buttons or the Rotary Dial. The Z5 will stop frothing and will  
start brewing the coffee. You can stop the coffee brewing in the  
same way.  
Latte: The Dial points to the tall glass. Hot steamed milk with no  
or very little froth will be created.  
COFFEE READY  
Place a cappuccino cup underneath the Dual Nozzle System.  
The cup should have at least a 8 oz. capacity. Make sure the  
dial points to the cappuccino setting (Fig. 5f).  
Push the Cappuccino Button (Fig. 3).  
CAPPUCCINO  
The Z5 begins grinding the coffee and at the same time starts  
siphoning the cold milk.  
16.  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Please note: Cold milk will stay fresh up to 8 hours in the thermal  
milk container. Do not leave the milk sitting outside the refrigerator  
over night.  
Please note: If there is not enough milk in the milk container, the  
frother nozzle will dispense steam only. Stop the frothing action  
and refill the milk container.  
Please note: If the Dial points to the cappuccino position and  
you do not get froth on your milk, check the following items:  
a. Make sure all connections are tight.  
b. Remove the venting tip (Fig. 5a) and squeeze the bottom part.  
Milk might have closed the venting lip. Replace venting tip.  
c. Skim milk will create considerably more froth than regular  
milk. Soy milk will produce very little froth.  
16. SPECIAL COFFEE BUTTON  
COFFEE READY  
Place a cup under the Auto Cappuccino System.  
Make sure the long or the short nozzle system is installed.  
Push the SPECIAL COFFEE button (Fig. 3). The Z5 will brew a  
cup coffee from the back nozzle and will stop automatically.  
This button is useful if you want to create special milk drinks  
that are not pre-set with any of the other buttons.  
As explained in chapter 11, you can change the strength and  
the volume for this button, just before brewing.  
17. CAPPUCCINO RINSING CYCLE CAPPU RINSE  
Ten minutes after using the milk or the cappuccino buttons, the  
display will show the messages CAPPU RINSE, COFFEE  
READY, CAPPU RINSE and so on. At the same time the Rinse  
Button will illuminate.  
Place a cup underneath the Auto Cappuccino System.  
Turn the Dial all the way down to the steam position (Fig. 5f).  
Push the rinse button. CAPPUCCINO RINSING. For a few  
seconds the Z5 will push hot water through the Dual Nozzle  
System to remove any milk deposits.  
15. HOT MILK AND HOT CHOCOLATE  
The Milk Button (Fig. 3) lets you produce hot milk or hot chocolate.  
Connect the long hose to the Dial system and insert the other  
end into the container with cold milk or cold chocolate milk.  
Set the Dial to the cappuccino or the latte setting.  
Place a cup underneath the Auto Cappuccino System.  
COFFEE READY  
COFFEE READY  
Push the Milk Button  
Turn the selector switch back to the Cappuccino or Latte position.  
Please note: If the CAPPU RINSE message appears and you  
do not plan to use the milk or cappuccino button within the next  
few minutes, we highly recommend to run this rinse cycle without  
delay. Warm milk inside the dual nozzle will deteriorate within a  
short period of time and milk fats can create foul smells.  
Please note: You can also perform a cappuccino rinsing cycle  
manually using maintenance menu (chapter 26.1).  
The display shows MILK 20 SEC. The Z5 will produce hot milk  
for 20 seconds and then stop automatically.  
You can always change the duration by turning the Rotary Dial.  
You can stop the milk flow by pushing the Rotary Dial or any  
beverage button.  
Tip: Without moving the cup you can now add coffee using the  
Special Coffee Button. .  
17.  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Please note: When you are finished using the cappuccino feature  
for the day please proceed as follows:  
a. Remove the Thermal Milk container and place in the refrigerator.  
b. Remove the flexible hose on both ends and clean with hot water.  
c. Pull off the Dial component and the Dual Nozzle and rinse  
under warm water.  
18. CAPPUCCINO CLEANING CYCLE  
Milk contains fatty acids. Hot water alone may not always  
remove milk fats completely. If you use the cappuccino feature  
frequently or if you use the Z5 for commercial purposes we highly  
recommend to perform this cleaning cycle daily. It will take less  
than two minutes.  
Please note: the Z5 will not prompt you to run this special cycle.  
20. USING PRE-GROUND COFFEE  
the program RINSE UNIT in the maintenance section to run  
You can also use pre-ground coffee, bypassing the grinder. This  
comes in handy if someone requests decaf coffee or a decaf  
cappuccino. You can also use the pre-ground funnel for ground  
flavored coffee.  
Please note: Never fill the funnel with instant coffee. Do not fill  
the funnel with more than two scoops. The funnel is not a  
storage container. If coffee is ground too fine it might be processed  
very slowly or the Z5 will interrupt the process altogether.  
some hot water through the coffee spouts (chapter 26.1)  
21. USING HOT WATER  
The Z5 can produce up to 16 oz. of hot water. This is great if you  
want to produce a hot cup of tea or instant soup or if you want  
to add some hot water to your coffee.  
COFFEE READY  
Place a cup underneath the Hot Water Spout (Fig. 1,6)  
Push the Hot Water Button (Fig.3). The display shows HOT  
WATER PORTION.  
The pre-set is 6 oz. You can change the hot water volume during  
brewing by turning the Rotary Dial. You can always stop the hot  
water output by pushing any of the beverage buttons.  
COFFEE READY  
Place one or two cups under the Dual Coffee Spouts or the  
Auto Cappuccino System. Open the Cover Lid and then open  
the Lid for Ground Coffee (Fig. 4). Opening this lid automati-  
cally disengages the grinder. The display shows PRE-GROUND  
FILL POWDER.  
Add one or two level scoops of pre-ground coffee into the funnel  
and close the lid Fig. 12). The display shows PRE-GROUND  
SELECT PRODUCT.  
22. WATER CARE  
Water is heated inside the Z5. With use, this leads to calcium  
deposits forming inside the machine. With the Z5 you have the  
following options to take care of the water:  
Most convenient: Clearyl Water Filter Cartridge (chapter 23).  
Least expensive: Decalcifying System (chapter 24 and 29).  
Your Z5 is pre-set in the factory to automatically remind you to  
decalcify based on a water hardness of 10º DH = 13 grains. You  
can change the water hardness setting to comply with the water  
you are using (chapter 24).  
Please note: The Z5 will automatically remind you when it is  
necessary to run certain water maintenance programs. It is  
important that you follow those instructions. Otherwise your Z5  
might break down.  
Push any of the six coffee producing buttons. The Z5 will brew  
the selected beverage. During brewing you can still change the  
coffee volume by turning the Rotary Dial.  
COFFEE READY  
Please note: If you inadvertently opened the lid for the coffee  
funnel, just close it. The Z5 will detect that there is no coffee in  
the funnel. The display will show PRE-GROUND NOT ENOUGH  
and will return to COFFEE READY.  
Please note: After use of sugar coated or flavored coffee  
through the pre-ground coffee funnel you may experience some  
flavor transfer when switching back to your regular coffee. Select  
19.  
Download from Www.Somanuals.com. All Manuals Search And Download.  
23. CLEARYL WATER FILTER CARTRIDGE  
Activating:  
The machine comes with one Clearyl Water Filter Cartridge. The  
Clearyl cartridge  
Reduces the water hardness up to 75%.  
You must activate the cartridge otherwise the Z5 cannot monitor  
it properly and assumes that the machine is still in decalcifying  
mode.  
Removes (if present) up to 85% chlorine, up to 90% lead, up  
to 95% copper and up to 67% aluminum.  
Cleans the water through an upward current principle (Fig. 9)  
just before the brewing cycle starts, ensuring freshly filtered  
water every time you make coffee.  
Eliminates decalcifying except when using very hard water  
(25 grains or higher), see chapter 24. In this case we recom-  
mended to decalcify the Z5 once or twice a year.  
To reorder cartridges, see chapter 34.  
COFFEE READY  
Push the Rotary Dial until you hear a beep.  
FILTER NO  
Push the Rotary Dial again, to enter the FILTER program.  
Turn the Rotary Dial until the display shows FILTER YES and  
push the Rotary Dial to confirm. The display shows INSERT  
FILTER PRESS BUTTON and the Rinse Button illuminates.  
Place a 20 oz. container under the Auto Cappuccino System.  
Push and hold the Rinse Button until the display shows  
FILTER RINS. For the next 90 seconds the Z5 will push  
water through the cartridge and out through the milk nozzle.  
Initially, the water may have a slight discoloration. The program  
will stop automatically. The display shows UNIT IS HEATING  
and then COFFEE READY.  
23a. INSTALLING & ACTIVATING THE CLEARYL WATER  
CARTRIDGE  
Installing:  
Important: Never install the cartridge before or during  
"Preparing Machine For The First Time" (chapter 6).  
Please note: If your container is not large enough, you can  
Remove cartridge from its bag and rinse cartridge under water. interrupt the activation cycle by simply pressing any beverage  
Add the extension rod to the cartridge (Fig.8).  
Remove the water tank, make sure it is empty.  
Pull up the cartridge holder and insert the cartridge with its  
tapered end down (Fig. 10). Make sure it fits securely over the  
white mesh piece inside the water container. Push down  
gently (Fig. 11).  
button. The display shows PRESS BUTTON and the Rinse  
Button is still illuminated. Replace the empty container and  
continue the filter activation by pressing the Rinse Button.  
Please note: As long as the filter is activated, the water  
hardness setting is automatically turned off.  
Close the cartridge holder. Make sure the holder snaps into  
place.  
Fill the water tank with fresh cold water and replace.  
23b. REPLACING THE CLEARYL WATER CARTRIDGE  
The filter is monitored automatically. After approx. 75 liters of  
water (~2,500 oz.) the display shows COFFEE READY and  
FILTER-CHANGE. The Rinse Button will light up.  
20.  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Please note: We recommend to set the time (chapter 26.7). If  
you have not used 75 liters of water in three months, the filter  
monitor will indicate that a filter change is necessary.  
Important: Once the filter has lost its calcium suppressing  
abilities, calcium will build up inside the machine. Since the  
Water Hardness Selector is off, the machine will not remind you  
when to decalcify. This could clog and ruin your machine.  
Push the Rinse Button. INSERT FILTER PRESS BUTTON.  
Remove the old filter and set the extension rod aside. The  
used filter cartridge is environmentally friendly and can be  
disposed with your regular household trash.  
"Water Hardness in Grains." The Z5 will show you the water  
hardness in the German hardness scale (which is a bit different  
from the American "Grain" scale (see chart below).  
You can also use the enclosed water hardness indicator strip to  
determine the water hardness:  
Insert the stick for one second into the water you want to  
use. Shake off any access water and wait for one minute.  
If all five fields of the test stick turn reddish, set the hardness  
level to 5 squares. If four fields turn reddish, set the hardness  
level to 4 squares and so on.  
Please note: If you use Spring Water or Bottled Water you can  
set the hardness level to 1, "extremely soft water".  
Important: Keep the Extension Rod  
Make sure the water tank is empty.  
The Z5 will give you the following options:  
Remove the new cartridge from its bag and rinse under  
running water. Now install as explained in chapter 23A.  
Place a 20 oz. container under the Auto Cappuccino System.  
Push and hold the Rinse Button until the display shows  
FILTER RINS. For the next 90 seconds the Z5 will push  
water through the cartridge and out through the milk nozzle.  
Initially, the water may have a slight discoloration. The program  
will stop automatically. The display shows UNIT IS HEATING  
and then COFFEE READY.  
Display Equivalent Indicator Strip  
German American number of  
Level  
Display  
Degree Grains  
"reddish" fields  
Not Active*  
1. extremely soft water ■  
2. soft water  
3. medium water  
4. hard water  
5. very hard water  
6. extremely hard water  
Not Active  
1-4  
5-9  
1-5  
6-11  
None  
1 to 2  
■■  
■■  
■■■  
■■■■  
■■■■■  
10-14 13-18 2 to 3  
15-19 19-24 3 to 4  
20-24 25-30 4 to 5  
24. WATER HARDNESS MONITOR  
25 +  
32 +  
All 5  
If you do not use the Clearyl Filter Cartridge (chapters 23 23B.)  
the Z5 will remind you when it is time to perform a decalcifying  
cycle. The machine is set to medium hard water. If you have  
harder water you need to set it to a higher level. If you have soft-  
er water you can set it to a lower level. If you are not sure about  
the hardness of your water, ask your local water company for the  
*Not Active: You can only use this setting for distilled water.  
Level 5 and Level 6: If your tab water is very hard and falls into  
these two categories, decalcifying will be frequent. In this case  
bottled water is recommended.  
21.  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Please note: If your water has a high calcium content (level 5 or 6)  
and you use the Clearyl Filter Cartridge we recommend to decalcify  
the Z5 once or twice a year (chapter 26.1).  
When the coffee volume in your cup is at the new desired  
level, push the 1-cup Coffee Button again. The display shows  
CONFIRMED  
COFFEE READY  
24a. CHANGING THE WATER HARDNESS MONITOR  
COFFEE READY  
From now on, this will be the amount of coffee the Z5 will produce  
when you push this button.  
Push the Rotary Dial until you hear a beep.  
FILTER  
Turn the Rotary Dial until the display shows  
HARDNESS 10º DH  
Push the Rotary Dial to enter the program.  
Turn the Rotary Dial until desired hardness level is displayed.  
Push the Rotary Dial to confirm the setting.  
Turn the Rotary Dial until the display shows EXIT.  
Push the Rotary Dial.  
Please note: the 1-cup and 2-cup buttons are independent of  
each other. This means if you pre-set the 1-cup coffee button to  
4 oz. the 2-cup button does not automatically produce 8 oz. You  
can pre-set the 2-cup button completely independent.  
Please note: when changing the volume for the special cup  
button, place a cup under the auto cappuccino system.  
25.2 CAPPUCCINO BUTTON  
You can change the pre-set volumes for milk and coffee. This  
allows you to adjust the volume exactly to your cup size.  
Place a cup underneath the auto cappuccino system.  
COFFEE READY  
COFFEE READY  
The Z5 will automatically remind you when it is time to decalcify  
(chapter 29).  
Push and hold the Cappuccino Button until the display reads  
ENOUGH MILK PRESS BUTTON.  
25. CHANGING PRE-SET CUP SIZES  
Each beverage button has been set to certain values (pre-sets).  
See chapter 5. You can change all pre-set values and enter ones.  
Once you have enough frothed milk in your cup, push the  
Cappuccino Button again. Now the Z5 starts brewing the coffee  
and the display shows ENOUGH? PRESS BUTTON.  
Once enough coffee has been added to your cappuccino,  
press the Cappuccino Button again. The display shows  
CONFIRMED ■  
25.1 1-AND 2-CUP BUTTONS; SPECIAL CUP BUTTON  
This procedure is the same for all five coffee buttons (Fig. 3).  
COFFEE READY  
EXAMPLE: Changing the 1-cup Coffee Button. (Fig.3).  
Place a cup underneath the coffee spouts.  
Push and hold the 1-cup Coffee Button until the display  
shows ENOUGH? PRESS BUTTON.  
COFFEE READY  
Please note: You can also change the pre-set parameters for  
the cappuccino button in programming (chapter 26.4)  
22.  
Download from Www.Somanuals.com. All Manuals Search And Download.  
25.3 MILK BUTTON  
Please note: to get back to COFFEE READY, turn the Rotary  
Dial until the display shows EXIT, then push the Rotary Dial.  
You can change the pre-set milk volume.  
Place a cup underneath the Auto Cappuccino System.  
COFFEE READY  
Push and hold the Milk Button until the display reads  
ENOUGH MILK PRESS BUTTON.  
Once you have enough frothed milk in your cup push the Milk  
Button again. The display shows CONFIRMED .  
COFFEE READY  
Please note: You can also change the pre-set parameters for  
the milk button in programming (chapter 26.5)  
Function  
Display  
Comment  
Chapter  
Clearyl Water Filter FILTER NO or  
FILTER YES  
Install and activate the  
Clearyl Filter  
23A  
Water Hardness  
(if FILTER is set to  
YES, this function  
is suppressed)  
HARDNESS  
Change water hardness  
(when not using the  
Clearyl Filter)  
24A  
e7(a)0mpera(, tpr)17.theT  
Maintenance MAINTENANCEAe8cesUT L  
25.4 HOT WATER BUTTON  
You can change the pre-set hot water amount.  
Place a cup underneath the hot water spout.  
COFFEE READY.  
Push and hold the Hot Water Button until the display reads  
ENOUGH WATER PRESS BUTTON.  
Once you have enough hot water in your cup push the Hot  
Water Button again. The display shows CONFIRMED .  
COFFEE READY  
26. PROGRAMMING / MAINTENANCE  
The Z5 provides programming, maintenance and look-up func-  
tions. With the display at COFFEE READY you can access  
these functions as follows:  
Push and hold the Rotary Dial until you hear a beep and the  
display shows FILTER.  
The Z5 offers the following Functions (see adjacent chart)  
Turn the dial clockwise slowly to scroll through Functions.  
Push and turn the Rotary Dial to select from the following  
Maintenance Programs:  
RINSE UNIT  
Function  
Display  
Comment  
Chapter  
Time  
TIME  
Set actual time  
26.7  
CAPPUCCINO CLEANING  
CHANGE FILTER (this program will only show up if FILTER is  
set to YES)  
CLEAN UNIT  
CAPPUCCINO RINSING  
Auto-On  
Auto-Off  
UNIT ON  
Choose an auto-on time  
26.8  
26.9  
OFF AFTER  
Choose an auto-off time  
after last use  
DECALCIFY UNIT.  
Information  
INFORMATION Check performance and  
a variety of settings  
26.10  
26.11  
To activate one of the above programs, push the Rotary Dial  
and follow the instructions on the display.  
Please note: If you do not select any of the Maintenance  
Programs, the display will return to COFFEE READY.  
Renaming  
display message  
RENAME  
Rename the beverage  
buttons, the "on" and "off"  
messages  
26.2 TEMPERATURE  
Language  
Display  
LANGUAGE  
DISPLAY  
Change the display to  
another language  
26.12  
26.13  
You can set the coffee temperature for the Cappuccino Button,  
the Special Coffee Button and the four coffee buttons on the  
right side to LOW, NORMAL or HIGH. The factory setting for  
these buttons is HIGH. The temperature difference between  
LOW and HIGH is approx. 7º F.  
Please note: the temperature also depends somewhat on the  
fineness setting of the grinder (chapter 7). The finer the grind the  
slower the water will pass through the coffee causing it to get  
somewhat hotter.  
Choose cup size info. in  
OZ. to ML. Choose time  
display in 24HRS or  
AM/PM mode  
Exit programming EXIT  
The only way to get back  
to COFFEE READY  
Changing the temperature:  
COFFEE READY  
Push and hold the Rotary Dial until you hear a beep and the  
display shows FILTER.  
Turn the dial until the display shows:  
26.1 MAINTENANCE PROGRAMS  
COFFEE READY  
Push and hold the Rotary Dial until you hear a beep and the  
display shows FILTER.  
Turn the dial until the display shows:  
MAINTENANCE  
TEMPERATURE  
24.  
Download from Www.Somanuals.com. All Manuals Search And Download.  
a. Push the Rotary Dial. SELECT PRODUCT.  
b. Push the beverage button for which you want to change the  
temperature, e.g. the 1-cup Espresso Button. The display  
shows 1 ESPRESSO HIGH.  
d. Push the Rotary Dial to confirm. CONFIRMED ■  
e. AROMA. To change another beverage button start with a.  
26.4 CAPPUCCINO PROGRAMMING  
c. Turn the Rotary Dial and select NORMAL (example).  
d. Push the Rotary Dial to confirm. CONFIRMED ■  
e. TEMPERATURE. To change another beverage button start  
with a. again.  
Chapter 25.2 explains how to change the pre-sets for milk and  
the coffee volume while the Z5 is brewing. In programming you  
can simply change the pre-sets by changing the values shown in  
the display without making the beverage.  
COFFEE READY  
Push and hold the Rotary Dial until you hear a beep and the  
display shows FILTER.  
Turn the dial until the display shows: CAPPUCCINO  
a. Push the Rotary Dial. The display shows MILK 15 SEC  
b. Turn the Rotary Dial until the desired duration is displayed,  
e.g. MILK 20 SEC.  
c. Push the Rotary Dial to confirm. CONFIRMED .  
Now the display shows COFFEE 3 OZ.  
d. Turn the Rotary Dial until the desired coffee volume is  
displayed, e.g. to COFFEE 5 OZ.  
e. Push the Rotary Dial to confirm. CONFIRMED ■  
Now the display shows CAPPUCCINO MILK 20 SEC.  
f. Turn the Rotary Dial until the display shows EXIT and push  
the Rotary Dial.  
26.3 COFFEE STRENGTH / AROMA  
You can set the coffee strength for the Cappuccino Button, the  
Special Coffee Button and the four coffee buttons on the right  
side to XMILD, MILD, NORMAL, STRONG, XSTRONG. For  
factory settings see chapter 5. In XMILD the 1-cup buttons grind  
for about 4 seconds, in XSTRONG for about 8 seconds. The 2-  
cup buttons grind between 7 and 10 seconds respectively. The  
minimum amount of coffee to be ground is approx. 5 grams, the  
maximum approx. 16 grams.  
Please note: the amount of ground coffee also depends on the  
fineness settings of the burr grinder. The coarser the setting the  
more coffee is ground through the burrs.  
COFFEE READY  
Push and hold the Rotary Dial until you hear a beep and the  
display shows FILTER.  
COFFEE READY  
Turn the dial until the display shows: AROMA  
a. Push the Rotary Dial. SELECT PRODUCT.  
b. Push the beverage button for which you want to change the  
coffee strength, e.g. the 2-cup Coffee Button. The display  
shows 2 COFFEE NORMAL.  
26.5 MILK PROGRAMMING  
Chapter 25.3 explains how to change the pre-sets for milk  
volume while the Z5 is brewing. In programming you can simply  
change the pre-set by changing the duration shown in the  
c. Turn the Rotary Dial and select XSTRONG.  
25.  
Download from Www.Somanuals.com. All Manuals Search And Download.  
display without using any milk  
Five minutes after last use, the Z5 will lower the stand-by  
temperature to economy. When making coffee at a later time,  
the machine will first heat up for up to 30 seconds.  
COFFEE READY  
Push and hold the Rotary Dial until you hear a beep and the  
display shows FILTER.  
This setting will save energy if you prepare only a few coffees or  
cappuccinos in large intervals. It is still much faster than turning  
the machine on every time you want to make coffee.  
COFFEE READY  
Push and hold the Rotary Dial until you hear a beep and the  
display shows FILTER.  
Turn the dial until the display shows: ENERGY SAVE NO.  
a. Push the Rotary Dial.  
b. Turn the Rotary Dial until the desired setting shows up, e.g.  
SAVE LEVEL 1.  
Turn the dial until the display shows: MILK  
a. Push the Rotary Dial. The display shows MILK 20 SEC  
b. Turn the Rotary Dial until the desired duration is displayed,  
e.g. MILK 30 SEC.  
c. Push the Rotary Dial to confirm. CONFIRMED ■  
Now the display shows MILK 30 SEC.  
d. Turn the Rotary Dial until the display shows EXIT and push  
the Rotary Dial.  
COFFEE READY  
c. Push the Rotary Dial to confirm. CONFIRMED ■  
Now the display shows ENERGY SAVE LEVEL 1.  
d. Turn the Rotary Dial until the display shows EXIT and push  
the Rotary Dial.  
26.6 ENERGY SAVING SETTINGS  
The factory setting is SAVE NO.  
Two other settings are possible: SAVE LEVEL 1 and SAVE  
LEVEL 2.  
COFFEE READY  
SAVE NO:  
26.7 ACTUAL TIME  
The Z5 is always in immediate stand-by mode. You can make  
coffee and steam and froth milk without delay as long as the  
machine is on.  
Setting the time allows you to program an auto-on time. Also,  
when using the Clearyl Filter, the Z5 will indicate a filter change  
after approx. 3 months if you do not use 75 liters of water within  
that period.  
COFFEE READY  
Push and hold the Rotary Dial until you hear a beep and the  
display shows FILTER.  
SAVE LEVEL 1:  
The Z5 is in constant stand-by mode for coffee and in energy  
saving mode for steam.  
If the Z5 is mostly used for coffee this setting will consume less  
energy. When using the cappuccino or milk button, the Z5 will  
first heat up for about 30 seconds and then prompt you again.  
SAVE LEVEL 2:  
Turn the dial until the display shows: TIME  
a. Push the Rotary Dial. The display shows TIME HOURS  
26.  
Download from Www.Somanuals.com. All Manuals Search And Download.  
b. Turn the Rotary Dial until the hours are set.  
c. Push the Rotary Dial to confirm. The display shows TIME  
MINUTES.  
CONFIRMED and displays UNIT ON and the selected time.  
f. Turn the Rotary Dial until the display shows EXIT and push  
the Rotary Dial.  
d. Turn the Rotary Dial until the minutes are set.  
e. Push the Rotary Dial to confirm. Display shows CONFIRMED ■  
and shows the actual time.  
f. Turn the Rotary Dial until the display shows EXIT and push  
the Rotary Dial.  
COFFEE READY  
26.9 AUTO-OFF  
Your Z5 is pre-set to turn itself off 2 hours after last use. You can  
change the auto-off interval between 1/2 hour and 14 hours or  
you can set the Z5 not to turn itself off at all.  
Recommendations: If you use the machine only in the morning,  
leave the auto-off as is.  
If you use the machine all day long set the auto-off between 3 and  
5 hours. This way the machine is always ready and you dont  
have to turn it on and wait for it to warm up again.  
COFFEE READY  
Push and hold the Rotary Dial until you hear a beep and the  
display shows FILTER.  
Turn the dial until the display shows: OFF AFTER  
a. Push the Rotary Dial. The display shows OFF AFTER 2 HRS  
b. Turn the Rotary Dial until the desired setting appears in the  
display, e.g. 5 HRS.  
COFFEE READY.  
Please note: For Daylight Saving you have to re-set the time.  
Please note: When fully charged, the built-in back up battery will  
keep the clock running for up to eight weeks in case the Z5 is  
unplugged or the main power switch on the left side is turned off.  
26.8 AUTO-ON  
You can set a time at which the Z5 turns itself on. This way you  
dont have to wait for the machine to warm up. Just run one 10  
second rinse cycle and you are ready for your first cup of coffee.  
First you need to set the actual time (chapter 26.7).  
COFFEE READY  
Push and hold the Rotary Dial until you hear a beep and the  
display shows FILTER.  
Turn the dial until the display shows: UNIT ON  
a. Push the Rotary Dial. The display shows HOURS  
b. Turn the Rotary Dial until the hours are set.  
c. Push the Rotary Dial to confirm. The display shows MINUTES  
d. Turn the Rotary Dial until the minutes are set.  
e. Push the Rotary Dial to confirm. Display shows and  
c. Push the Rotary Dial to confirm. Display shows CONFIRMED ■  
and shows OFF AFTER 5 HRS.  
d. Turn the Rotary Dial until the display shows EXIT and push  
the Rotary Dial.  
COFFEE READY  
27.  
Download from Www.Somanuals.com. All Manuals Search And Download.  
26.10 INFORMATION  
COFFEE READY  
a. Push the Rotary Dial. RENAME PRODUCT NAME. If you turn  
the dial you can select from PRODUCT NAME, WELCOME  
MESSAGE, END MESSAGE, EXIT.  
b. Select PRODUCT NAME and push the dial. PRODUCT  
NAME CHANGE. If you turn the dial you can select from  
CHANGE, RESET, RESET ALL. Select CHANGE and push  
the dial. SELECT PRODUCT.  
Push and hold the Rotary Dial until you hear a beep and the  
display shows FILTER.  
Turn the dial until the display shows: INFORMATION.  
a. Push the Rotary Dial 1 ESPRESSO 15 COUNT (example). It  
shows how often coffee was prepared with this button.  
b. Turning the Rotary Dial slowly clockwise, the display will show c. Push the 1-cup Espresso Button. The alphabet will show in  
the following additional information:  
How many cups made with the other buttons: 2 Espresso, 1  
Coffee, 2 Coffee, Cappuccino, Special Cup, Milk, Hot Water,  
Pre-ground.  
Then it will show the pre-sets for these buttons (volumes in oz.  
and milk in seconds)  
the display. Turn the dial to "C" and push the dial, then select  
the letter "U" and push the dial and so on.  
Please note: The "blank" space is located after the letter "Ü".  
d. When you are finished with the new name select the symbol  
and push the Rotary Dial.  
e. The machine will display CONFIRMED and returns to  
RENAME. Turn the dial until the display shows EXIT and  
push the dial.  
Finally it will show how often the programs for decalcifying,  
cleaning and filter change were used.  
c. Push the Rotary Dial to return to INFORMATION.  
d. Turn the Rotary Dial until the display shows EXIT and push  
the Rotary Dial.  
COFFEE READY.  
The next time you make coffee and push the 1-cup Espresso  
Button, the display will show CUP OF JOE.  
Please note: the maximum length of message is 12 characters  
including spaces.  
Please note: you can reset a single beverage button or you can  
reset all beverage buttons.  
COFFEE READY  
26.11 RENAMING  
This nifty feature lets you rename all eight beverage buttons, the  
welcome message and the end message. The original pre-sets  
are stored in the Z5 and you can always restore them.  
Lets change the 1 ESPRESSO name to CUP OF JOE.  
26.12 LANGUAGE SELECTION  
You can change the display from English to Spanish, German,  
French or Dutch  
COFFEE READY  
Push and hold the Rotary Dial until you hear a beep and the  
display shows FILTER.  
Turn the dial until the display shows: RENAME  
COFFEE READY  
Push and hold the Rotary Dial until you hear a beep and the  
display shows FILTER.  
28.  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Turn the dial until the display shows: LANGUAGE  
a.Push the Rotary Dial ENGLISH.  
b.Turn the Rotary Dial until the desired language is displayed.  
c.Push the Rotary Dial to confirm.  
27.1 FILL WATER TANK  
The display shows WATER TANK FILL when the water level is  
low. This prevents the pump from running dry. You cannot brew  
coffee. Add water and the display will show COFFEE READY.  
d.Turn the Rotary Dial until the display shows EXIT and push to  
confirm. The display will show the equivalent of Coffee Ready  
in the language you selected.  
27.2 FILL BEANS  
COFFEE READY FILL BEANS.  
This message will appear with a few beans left in the bean con-  
tainer. This feature makes sure that you will never produce a cup  
of coffee with not enough beans. You cannot brew coffee before  
adding beans (chapter 6.b).  
26.13 DISPLAY SETTINGS  
This function lets you select the time format: AM / PM or Military  
Time (24HR Format) and volume: OZ (ounces) or ML (milliliters).  
COFFEE READY  
Push and hold the Rotary Dial until you hear a beep and the  
display shows FILTER.  
Turn the dial until the display shows: SETTINGS  
a.Push the Rotary Dial. UNIT. Turn the dial and select from  
UNIT or TIME FORMAT.  
27.3 BEAN COVER MISSING  
When the display shows BEANCOVER MISSING the Z5 will not  
brew coffee. For safety reasons the cover must be in place.  
Make sure the bean cover is in place correctly.  
Please note: If you lose or break the bean cover the Z5 cannot  
be used at all. Contact our customer service department.  
b.Push the Rotary Dial and select the display you like.  
c.Push the Rotary Dial to confirm.  
d.Turn the dial until the display shows EXIT and push the dial.  
COFFEE READY  
27.4 EMPTY COFFEE GROUNDS  
Used coffee grounds are collected in the used coffee container  
(Fig. 2,8). After approx. 16 coffee portions, the display shows  
GROUNDS EMPTY and the Z5 will no longer make any bever-  
ages. Lift and pull out the complete drawer assembly carefully,  
since there is water in it (Fig. 2) TRAY MISSING.  
Important: Do not turn off or unplug the machine while you are  
emptying the coffee grounds. Empty the used coffee container  
and the drawer. Make sure that the grid, tray and use coffee  
container are all assembled correctly and re-insert.  
COFFEE READY  
27. CARE AND MAINTENANCE MESSAGES  
To make sure that your machine is always in the best possible  
condition the Z5 automatically monitors a series of functions,  
such as water tank level, used coffee container content, bean  
container etc. When certain conditions are not met, the Z5 will  
not let you prepare any beverages.  
29.  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Important: If you pull out the drawer in between, you must  
empty the used coffee container. The Z5 assumes that the used  
coffee container will be emptied. If you do not empty the con-  
tainer, used coffee will overflow inside the machine and can  
cause serious damage to the coffee release mechanism. If the  
display shows COFFEE BIN MISSING, the tray is not attached  
to the drawer (Fig. 2,9).  
Please note: The Z5 does not sense whether or not the used  
coffee container is inserted (Fig. 2,8). If you forget to insert the  
used coffee container, ground coffee will be discharged onto the  
tray inside the machine.  
TRAY MISSING and replace complete assembly (Fig. 2) .  
Important: Even if the drawer and the used coffee container are  
empty, you still need to remove the drawer for approx. 20 seconds  
and then replace it. The display shows PRESS BUTTON.  
b. Place a 12 oz. container under the coffee spouts and an 8 oz.  
container under the nozzles of the auto-cappuccino system.  
c. Push the Rinse Button. The display shows MACHINE IS  
CLEANING. You will hear a beep and after a moment the  
display shows ADD TABLET.  
d. Open the Cover Lid then the Ground Coffee Lid and drop in  
one white cleaning tablet, then close lid (Fig. 13).  
e. PRESS BUTTON. Push the Rinse Button. The display shows  
MACHINE IS CLEANING. The cleaning program will dispense  
hot foamy water in intervals through the spouts. After a  
few minutes the machine beeps and the display shows TRAY  
GROUNDS EMPTY.  
f. Lift and remove the drawer. Empty the used coffee container  
and drawer and replace. The display shows COFFEE READY.  
Please note: After this cleaning process, remove the powder  
funnel insert and clean under running water and replace.  
Tip: You can run a tablet cleaning cycle at anytime even if the  
machine does not prompt you. It is possible that very oily coffee  
beans deposit more oils slowing down the brewing process. An  
extra tablet cleaning cycle will remove the oil build up.  
COFFEE READY  
28. TABLET CLEANING PROCESS  
When brewing coffee inside the Z5, coffee oils start to accumulate  
in the brewing chamber and around the internal sieves. The Z5  
automatically reminds you after approx. 200 cups of coffee to  
run a tablet cleaning cycle. This 15 minute procedure is highly  
effective and will insure proper performance. The display will  
show COFFEE READY CLEAN and the rinse button illuminates.  
Please note: You can continue making coffee, however we highly  
recommend that you clean the machine as described below  
within the next few days. Please use one white cleaning tablet  
(enclosed). The machine comes with a pack of 2 tablets.  
To re-order cleaning tablets see chapter 34.  
Important: Once the cleaning program has started do not  
interrupt the procedure.  
COFFEE READY CLEAN  
Push and hold the rinse button until the display shows TRAY  
GROUNDS EMPTY.  
a. Remove and empty the drawer and used coffee container,  
Push and hold the Rotary Dial until the display shows FILTER.  
Turn the dial until the display shows: MAINTENANCE  
Push the dial and select CLEAN UNIT.  
Push the dial again. TRAY GROUNDS EMPTY.  
Continue with steps a. through f. above.  
30.  
Download from Www.Somanuals.com. All Manuals Search And Download.  
29. DECALCIFYING PROCESS  
The machine has an integrated decalcifying program.  
This program takes about 50 minutes.  
When the display shows COFFEE READY DESCALE it is time  
to decalcify the machine. You can still make coffee. However, it  
and then replace it. The display shows SOLVENT IN TANK.  
c. Remove and empty the water tank.  
d. Dissolve 3 of the large square decalcifying tablets in a con-  
tainer with 20 oz. of water (0.6 liters) and pour the solution  
into the water tank. Replace water tank.  
is highly recommended that you decalcify the machine within the e. SOLVENT IN TANK PRESS BUTTON. Remove the Dual Nozzle  
next 3 to 4 days.  
System and the Dial Component (Fig. 5a, 5b) and place one  
container underneath the milk spout. Place another container  
underneath the Hot Water Spout. Each container should have  
at least an 8 oz. capacity.  
Please note: If you use the Clearyl water cartridge and the display  
shows COFFEE READY DESCALE then your cartridge function  
is not activated. Follow the instructions in chapter 23a to  
program the Clearyl Cartridge function. If the cartridge is in use  
for several weeks install a new cartridge.  
f. Push the Rinse Button. MACHINE IS DECALCIFYING. For  
approx. 35 minutes the Z5 will pump the decalcifying solution  
in intervals through the Milk Nozzle, then internally into the  
drawer, then through the Hot Water Spout and again into the  
drawer. When the water container is empty the display will  
show TRAY / GROUNDS EMPTY.  
Important: The decalcifying program must not be interrupted.  
DECALCIFYING AGENT: Only use our special decalcifying  
tablets Model # 61848, see chapter 34.  
CAUTION: Never use vinegar or any other decalcifying agent.  
This might damage internal parts of the machine.  
CAUTION: Immediately remove any splashes or drops of the  
decalcifying solution from sensitive surfaces, such as natural  
stone or wood.  
g. Remove the containers. Then remove and empty the drawer  
and used coffee container and replace complete assembly  
(Fig. 2).  
h. WATER TANK FILL. Remove the water tank, thoroughly rinse  
it and fill with fresh cold water.  
Always wait until the decalcifying solution in the water tank has  
been used up. Do not fill additional decalcifying solution into the  
water tank.  
a. Push and hold the rinse button until the display shows TRAY /  
GROUNDS EMPTY.  
i. Replace the water tank.  
j. PRESS BUTTON. Place one container underneath the Milk  
Nozzle and one container underneath the Dual Coffee Spouts  
and the Hot Water Spout. Each container should have at least  
an 8 oz. capacity.  
b. Remove and empty the drawer and used coffee container  
TRAY MISSING and replace complete assembly (Fig. 2).  
Important: Even if the drawer and the used coffee container are  
empty, you still need to remove the drawer for approx. 20 seconds  
k. Push the Rinse Button. MACHINE IS DECALCIFYING. For the  
next few minutes the Z5 will pump the fresh water through the  
Milk Nozzle, then internally into the drawer and finally through  
the Hot Water Spout to remove all decalcifying traces.  
31.  
Download from Www.Somanuals.com. All Manuals Search And Download.  
l. At the end of the decalcifying cycle the display shows  
MACHINE IS HEATING. After a few seconds the Z5 will  
automatically run a rinse cycle through the Dual Coffee  
Spouts. RINSING.  
Please note: Use the original inside and outside carton for  
transport, or you can order a custom molded, special service ship-  
ping container through our customer service department ($40).  
m. TRAY / GROUNDS EMPTY Remove the containers and  
remove and empty the drawer and used coffee container and  
replace complete assembly (Fig. 2).  
31. TIPS FOR BETTER COFFEE  
Pre-warm cups.  
If your cup is pre-warmed, your coffee will stay warm longer,  
especially when you prepare small cups. Use the hot water  
spout to pre-warm your cups.  
COFFEE READY.  
Tip: You can run a decalcifying cycle at anytime even if the  
machine does not prompt you.  
COFFEE READY  
Push and hold the Rotary Dial until the display shows FILTER.  
Turn the dial until the display shows: MAINTENANCE  
Push the dial and select DECALCIFYING UNIT.  
Push the dial again. TRAY GROUNDS EMPTY.  
Continue with step b. through l. above.  
Height adjustable coffee-spout  
The closer the coffee spouts are to your cups, the less heat is  
lost in the air. The crema is more durable if the coffee flows down  
the inside of the cup, rather than hitting the bottom of the cup.  
Old beans  
Beans will lose aroma when sitting too long in the bean container.  
We recommend to fill just enough coffee beans into the bean  
container for up to three or four days.  
30. EMPTYING SYSTEM BEFORE TRANSPORT  
This procedure is necessary to prevent water and frost damage  
in case you intend to transport the machine.  
Turn the machine off with the on/off button on top of the  
machine. The main power switch is still on.  
32. TROUBLE SHOOTING  
A. NO COFFEE COMES OUT OF THE COFFEE SPOUT  
Reason: Beans in bean container are not properly feeding into  
the grinder because they are stuck together.  
Remove the water tank.  
Place a cup underneath the Hot Water Spout and place a cup  
underneath the Auto Cappuccino System.  
Push and hold the Rinse button until the display shows SYS  
EMPTY. The Z5 will release a bit of water and steam and will  
turn off automatically.  
Before transport make sure the Water Container and the Bean  
Container are empty.  
Solution: Stir beans before grinding. While grinding turn  
the grinding selector to the coarsest setting (chapter 7).  
Reason: You used ground coffee in the Ground Coffee Funnel.  
The ground coffee was too fine.  
Solution: Use ground coffee that is ground somewhat coarser.  
Reason: No water is transported through the system.  
Solution: Remove water container and make sure that the  
connecting valve is free of any particles (like a coffee bean etc).  
32.  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Reason: The ground coffee funnel or the internal brewing  
chamber is clogged.  
Solution: Place a cup underneath the Dual Coffee Spout and  
run an extra rinse cycle.  
The milk you are using is "too heavy". "Half and Half" or liquid coffee  
creamers like "coffeemate" are too heavy to be siphoned fast  
enough through the system.  
Skim milk will always produce more froth than whole milk.  
COFFEE READY  
D. GRINDER MAKES AN EXTREMELY LOUD NOISE;  
NO BEANS ARE GROUND  
Reason: A stone is blocking the burr grinder.  
Turn the machine off. Unplug the machine.  
Open the Cover Lid and remove the Bean Container Safety  
Lid (Fig. 4).  
Remove any beans with a vacuum hose.  
Attach the burr grinder release tool (Welcome Pack) to the  
upper burr (Fig. 15).  
Push and hold the Rotary Dial until display shows FILTER.  
Turn the dial until the display shows: MAINTENANCE  
Push the dial and select RINSE UNIT.  
Push the Rotary Dial again. Place a cup underneath the Dual  
Coffee Spouts and push the Rinse Button.  
COFFEE READY  
B. THE DISPLAY READS FILL WATER BUT THERE IS  
ENOUGH WATER IN THE WATER TANK.  
Reason: The low water floatation device (Fig. 10 "x") is missing.  
Solution: Within the water tank is a small compartment. Inside is  
a small black floatation device. On top is a small clear plastic  
cover. This small plastic cover is missing and the floatation  
device is outside of the small compartment. Check if you can  
locate both pieces and reassemble. If you cannot find them, call  
1-800-220-5701. We will send the pieces to you FREE OF CHARGE.  
If you cannot find the tool, call customer service  
1-800-220-5701 and we will send the tool free of charge.  
Turn the tool slowly counter-clock wise until the stone is  
released.  
Fill with a few beans.  
Turn the machine on and test the grinder.  
Discard the first two cups of coffee.  
C. INSUFFICIENT FROTHED MILK PRODUCTION  
Make sure  
the dial of the Auto Cappuccino System points the frothing  
position (Fig. 5f).  
the venting tip (Fig. 5a) is clean (check if the flexible lip is free  
of any old milk residue).  
the Auto Cappuccino System is assembled tightly (chapter 12)  
all parts of the Auto Cappuccino System are clean and not  
clogged with old milk residue  
33. ERROR MESSAGES  
If the Z5 displays any of the following error messages, please  
proceed as described.  
ERROR 1, ERROR 3, ERROR 4, ERROR 5  
Call our customer service hot line 1-800-220-5701.  
Your machine needs to be returned for service.  
33.  
Download from Www.Somanuals.com. All Manuals Search And Download.  
ERROR 2  
Decalcifying tablets (large square tablets) - Model #61848  
Please note: You must use decalcifying tablets if you do not  
use the Clearyl cartridge.  
Your machine is too cold. The heating sensor does not react.  
Turn the machine off.  
Keep the machine at normal room temperature (65º F or  
higher) for 2 hours .  
You can order these supplies:  
Then turn it on again.  
with the enclosed mail order form or  
If display still shows ERROR 2, call customer service.  
by calling our customer service center at 1-800-220-5701.  
ERROR 6, ERROR 7, ERROR 8  
Turn machine off, turn the main power switch off and unplug  
machine for a minute.  
Turn machine on again. If the error message comes up again,  
try one more time.  
35. LIMITED WARRANTY  
Please note: This warranty will be void if the Warranty / Product  
Registration has not been received two weeks after the purchase  
date (you can fax or mail the registration or you can register  
through our website www.capresso.com)  
If the message persists, call customer service.  
This limited warranty covers your new IMPRESSA Z Series.  
For Home and Commercial Use: One Year or 6,000 coffee  
brewings, whichever comes first.  
34. MAINTENANCE SUPPLIES  
The following supplies are necessary to keep your machine in  
good working order:  
Clearyl Water Filter Cartridge (one included)  
Model #64553; the machine will remind you automatically.  
Tip: If you brew 10 cups a day you need about one Clearyl  
cartridge per month. Always keep extra cartridges available.  
Special Cleaning Tablets (two included) Model #62205  
Tip: If you brew 10 cups a day you need about one tablet  
every 3 weeks. Always keep extra tablets available.  
Auto-Cappuccino Cleaner (one bottle included)  
Model #63801  
This warranty is in effect for the period and usage described  
above from the date of the first purchase and is limited to the  
United States of America. This warranty covers all defects in  
materials or workmanship (parts and labor) including free UPS  
ground transportation for both ways within the continental  
United States. For Hawaii and Alaska freight is not covered by  
this warranty.  
TRANSPORT: When sending the Z5, use the original packing  
materials, the inner and outer cartons or you can order a special  
custom molded service shipping container through our customer  
service department ($40). If you ship the machine in other packag-  
ing any damage in transit is NOT covered by this warranty.  
Tip: If you use the auto cappuccino cleaner once a day you  
need a new bottle every 2 1/2 weeks. Always keep extra  
bottles available.  
34.  
Download from Www.Somanuals.com. All Manuals Search And Download.  
This warranty does not cover:  
Any machine NOT distributed by JURA-CAPRESSO within the  
United States.  
Any machine not purchased from an Authorized Dealer.  
Damage caused by accident, abuse, negligence, misuse,  
improper operation or failure to follow instructions contained in  
this manual.  
Any service or alteration performed by an unauthorized person,  
company or association.  
Damage caused by neglecting and omitting maintenance,  
cleaning and decalcifying cycles.  
Damage caused by use of instant coffee or any other ingredients  
not allowed in this product.  
Other limitations and exclusions:  
Any implied warranties including fitness for use and mechantability  
are limited in duration to the period of the express warranty set  
forth above and no person is authorized to assume for JURA-  
CAPRESSO any other liability in connection with the sale of the  
machine. JURA-CAPRESSO expressly disclaims liability for  
incidental and consequential damages caused by the machine.  
The terms "incidental damages" refer to the loss of the original  
purchasers time, loss of the use of the machine or other costs  
relating to the care and custody of the machine. The terms  
"consequential damages" refer to the cost of repairing or replacing  
other property which is damaged when this machine does not  
work properly. Any loss of income is excluded. The remedies  
provided under this warranty are exclusive and in lieu of all others.  
This warranty gives you specific legal rights, and you may also  
have other rights which vary from state to state.  
35.  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Jura-Capresso, LLC  
81 Ruckman Road, Closter, NJ 07624  
201-767-3999 Fax: 201-767-9684  
Customer Service: 1-800-220-5701  
Email: contact@capresso.com Website: www.capresso.com  
Download from Www.Somanuals.com. All Manuals Search And Download.  

BenQ Computer Monitor GL2040 User Manual
Billy Goat Lawn Mower HW651SP User Manual
Bookendz Laptop Docking Station BE 10369 User Manual
Bosch Appliances Washer Dryer WTZ1500 User Manual
Boss Audio Systems Car Amplifier CX2500D User Manual
Cadillac Automobile 2008 Escalade EXT User Manual
Canon Digital Camera 1V User Manual
Canon Printer C6800 User Manual
Capresso Espresso Maker Espresso Classic 114 User Manual
Chauvet Work Light LED Light User Manual