Canon Projector WUX10 User Manual

Canon

Projector WUX10 MarkII

User Commands

Revision 1

Download from Www.Somanuals.com. All Manuals Search And Download.

Projector WUX10 MarkII User Commands

Table of Contents

Revision Histor y ........................................................................................................................................... i

1. Overview .................................................................................................................1

2. Communication Specifications.................................................................................2

Communication Specifications ................................................................................................................... 2

Communication System (Serial )................................................................................................................. 3

Communication System (LAN )................................................................................................................... 3

Command s ................................................................................................................................................... 4

Respons e ...................................................................................................................................................... 5

Other............................................................................................................................................................ 6

3. Communication Flo w ...............................................................................................7

Transmission sent ....................................................................................................................................... 7

Transmission received................................................................................................................................. 7

Command/Respons e .................................................................................................................................... 7

Response Reception Timeou t ...................................................................................................................... 7

Control Mod e ............................................................................................................................................... 7

Other............................................................................................................................................................ 7

4. Command Syste m ...................................................................................................8

5. Command List .......................................................................................................10

6. Details of Comman d ..............................................................................................12

6AXADJ .................................................................................................................................... 13

6AXR-Y ..................................................................................................................................... 14

ASCOMBO_* ............................................................................................................................ 15

ASPEC T .................................................................................................................................... 16

AUTOP C ................................................................................................................................... 18

AUTOSETEX E ......................................................................................................................... 19

A V OL......................................................................................................................................... 20

BLANK ..................................................................................................................................... 21

BLANKCOLOR ........................................................................................................................ 22

BR I ............................................................................................................................................ 23

BVOL ........................................................................................................................................ 24

COMVER .................................................................................................................................. 25

CON T ........................................................................................................................................ 26

DGAMMA ................................................................................................................................. 27

DOTS ........................................................................................................................................ 28

DPON........................................................................................................................................ 29

ER R ........................................................................................................................................... 30

FCONTDRV.............................................................................................................................. 31

FREEZE.................................................................................................................................... 32

FSTEPDR V ............................................................................................................................... 33

FTONEADJ .............................................................................................................................. 34

Download from Www.Somanuals.com. All Manuals Search And Download.

Projector WUX10 MarkII User Commands

GAMM A .................................................................................................................................... 35

GUIDE ...................................................................................................................................... 36

HPIX/VPIX ............................................................................................................................... 37

HPOS/VPOS ............................................................................................................................. 38

HUE .......................................................................................................................................... 39

IMAG E ...................................................................................................................................... 40

IMAGEFLIP ............................................................................................................................. 42

INPUT....................................................................................................................................... 43

KEYLOCK ................................................................................................................................ 44

LAM P ........................................................................................................................................ 45

LAMPCOUNTER ..................................................................................................................... 46

LAN G ........................................................................................................................................ 47

LEDILLUMINATE................................................................................................................... 48

LMP T ........................................................................................................................................ 49

MAIN ........................................................................................................................................ 50

MOD E ....................................................................................................................................... 51

MUTE ....................................................................................................................................... 52

NOSIG ...................................................................................................................................... 53

PJON......................................................................................................................................... 54

PMM.......................................................................................................................................... 55

POWER..................................................................................................................................... 56

PRODCODE ............................................................................................................................. 57

PROG ........................................................................................................................................ 58

RC ............................................................................................................................................. 59

RCC H ........................................................................................................................................ 61

RESET ...................................................................................................................................... 62

RGBGAI N ................................................................................................................................. 64

RGBOFFSE T ............................................................................................................................ 65

ROMVER .................................................................................................................................. 66

SAT............................................................................................................................................ 67

SCRNASPECT.......................................................................................................................... 68

SEL ........................................................................................................................................... 69

SHAR P ...................................................................................................................................... 71

SIGNALSTATU S ...................................................................................................................... 72

TEM P ........................................................................................................................................ 73

TMP L ........................................................................................................................................ 74

TRACK...................................................................................................................................... 75

VK S ........................................................................................................................................... 76

WB............................................................................................................................................. 77

WBRGB..................................................................................................................................... 78

ZCONTDR V .............................................................................................................................. 79

ZSTEPDR V ............................................................................................................................... 80

7. Error List................................................................................................................81

8. Error Processing....................................................................................................83

9. Other .....................................................................................................................85

Appendix 1. Reset Items ...........................................................................................86

iii

Download from Www.Somanuals.com. All Manuals Search And Download.

Projector WUX10 MarkII User Commands

1. Overview

These specifications describe the methods of controlling the Projector WUX10 MarkII from the PC over

an RS-232C connection or LAN.

Virtually all operations possible with the remote control can be controlled from the PC.

The following symbols are used in these specifications:

Symbol

Description

△

□

▽

Space with 0 or more characters (20h), Tab (09h), or other separator.

Space with 1 or more characters (20h), Tab (09h), or other separator.

Separator between parameters △ , △ | □.

Data in [ ] can be omitted.

[ ]

Same as OR.

Definition name is on the left side of this mark, and definition description is on the right side.

：＝

Revision History / Date

Changes

Revised by

Approved by

- 1 -

Download from Www.Somanuals.com. All Manuals Search And Download.

Projector WUX10 MarkII User Commands

2. Communication Specifications

Communication Specifications

The projector can be controlled via serial or LAN connection.

PC - Projector connection status

COM

PORT

SERVICE

PORT

LAN

PORT

LAN

PORT

Network

Canon

Connection

Dedicated cable

Projector

Item

Specifications

Item

Specifications

Connection

system

PC and projector connected on

a "1:1" basis

Connection

system

TCP/IP Connection

Connection

signal line

3-line connection of SD,

RD, and SG

Connection

signal line

Straight when connecting via

network

Connection

cable

Connection

cable

9pin RS-232C Cable (Cross)

LAN Cable

Send Data

Receive

Data

Receive

Data

Signal

Ground

Signal

Ground

* Signal lines other than the three lines of SD, RD and SG are not used in the projector!

* Loop back its own signals at the PC side if necessary.

Revision History / Date

Changes

Revised by

Approved by

- 2 -

Download from Www.Somanuals.com. All Manuals Search And Download.

Projector WUX10 MarkII User Commands

Communication System (Serial)

Item

Specifications

Communication system

Transmission speed

RS-232-C Start-stop synchronization Semi-duplex communication

19.2 Kbps

Character length

Stop bit

8 bits/character

2 bits

Parity

None

Transmission format

Variable-length record with terminal as delimiter

Maximum transmission

length

Maximum of 256 characters (bytes) including delimiters.

Delimiters are one of CR, LF, CR+LF, Null (0) (delimiters are identified

automatically).

Delimiters

Response delimiters are identical to command delimiters.

ASCII code (General-purpose characters: 20h to 7Fh), Tab (09h)

(Codes other than those above and delimiters are considered “other

separator codes”)

Transmission codes

Uppercase and lowercase of alphabetic characters are considered the same

character.

Double-byte characters and single-byte characters are not distinguished. All

are considered single-byte characters.

Communication

procedure

No procedure

Flow control

Error control

Break signal

None

Not supported

Tc Character：

Command/response

interval:

5s (Timeout between CR and LF is 10ms.)

15s

Time out

Communication System (LAN)

Item

Specifications

Communication system

Transmission speed

Character length

Revision History / Date

Changes

Revised by

Approved by

- 3 -

Download from Www.Somanuals.com. All Manuals Search And Download.

Projector WUX10 MarkII User Commands

Commands

Request transmissions sent from PC to the projector.

Transmission format

△<Command character strings> △<Delimiters>

Character strings consisting of 0 or more alphanumeric characters.

One of CR (0Dh), LF (0Ah), CR+LF (0Dh+0Ah), Null (00h)

Type

Description

Response

Commands with a command character string length of 0. No

command processing is performed.

■

□

■

BUSY

WARN

ERR

Null Commands

Character string

:= <Character string with length 0>

■

Projector control command. The format is shown below.

BUSY

WARN

ERR

Control

command

Character string

:= <Control name>□<Parameter value>

Command that sets values for each parameter. The format is

shown below.

■

BUSY

WARN

ERR

Setting

command

Character string

:= <Parameter name>△=△<Parameter value>

For the definition of <Parameter value>, refer to "Parameter

definitions.

Requests current value of each parameter. The format is shown

below.

□

■

BUSY

Reference

command

Character string

■

WARN

ERR

:=?△<Parameter name> | GET□<Parameter name>

Revision History / Date

Changes

Revised by

Approved by

- 4 -

Download from Www.Somanuals.com. All Manuals Search And Download.

Projector WUX10 MarkII User Commands

Response

Transmissions sent from Projector to PC in response to commands from PC.

Transmissionformat

Character strings consisting of one or more ASCII characters.

The first two characters are always <one lowercase letter>:

The first character indicates the response type.

Response

Meaning

type

Example

State response

i:OK i:BUSY etc.

w:USER_COMMAND..

e:000B INVALID..

g:AVOL=10

Warning

Error

Reference command response

Delimiters for commands sent from PC.

Type

OK response

After processing of each command is completed, a response is sent indicating that

the next command can be received.

<OK response character string>:=i:OK

BUSY response This response is sent when a command cannot be received during processing.Wait

for a few moments, and then try sending the command again.

<BUSY response character string>:=i:BUSY

Example:

> IMAGE=STANDARD

< i:BUSY

WARN response This response is sent when warning information is issued.

* that this command cannot be executed.

Example:

> IMAGE=STANDARD

< w:USER_COMMAND_VERSION_IS_UPDATED

ERR response

An error message is output.

* <Error code> is expressed as a four-digit hexadecimal number.

* Refer to “Error List”!

Example:

GET response

Example:

> abcdefg

< e:0002 INVALID_COMMAND

Request response for each parameter.

> GET LANG or ? LANG

< g:LANG=JPN

Revision History / Date

Changes

Revised by

Approved by

- 5 -

Download from Www.Somanuals.com. All Manuals Search And Download.

Projector WUX10 MarkII User Commands

Other

Transmission recognition

Transmission is recognized when delimiter is received.

Even if a maximum transmission length is received, the entire received transmission will be lost

unless a delimiter is received.

The <Parameter value> is defined as shown below.

<Value> := <Numerical value> | <ID> | “<Character string>”

* The range of valid values is -32768 to 32767.

<ID>

:= 1 or more ASCII characters (20h to 7Fh)

<Character string> := 0 or more ASCII characters (20h to 7Fh)

Revision History / Date

Changes

Revised by

Approved by

- 6 -

Download from Www.Somanuals.com. All Manuals Search And Download.

Projector WUX10 MarkII User Commands

3. Communication Flow

Transmission sent

At the sending side (PC), the transmission is sent within character intervals of Tc (character interval

timeout).

Transmission received

At the receiving side (Projector), data able to be received within the character interval of Tc is held,

and receiving of a delimiter is considered “transmission received”.

If a received character interval exceeds Tc or a delimiter is not received within 256 characters, all data

already received is lost, and the mode is reset to receive standby again.

Command/Response

One response is always returned for each command sent from the PC. (However, note that a response

may not be returned when the internal receive buffer overflows due to reception of a large amount of

data.)

Projector

Commands

Response

WithinTr

* The timeout interval between command and response (Tr) is 15 seconds.

Response Reception Timeout

If a response is not received within Tr (timeout interval between command and response) while in

response reception standby after sending a command at the PC, resend the command in the “response

reception timeout”.

Control Mode

"LOCAL mode" and "REMOTE mode" on previous models (SX50、SX6、SX60、X600、SX7、X700) have

been removed. You do not need to be aware of which mode it is in (no need to use "REMOTE" and

"LOCAL" commands) to send user commands.

Other

If AC power is supplied to the projector, communication is possible regardless of whether the power is

on or off.

The PC side cannot send a next user command before a response for the first command is returned.

If more than 2 user commands arrive at one port, "BAD_SEQUENCE" will be returned in response to

the second user command.

Response to the first processed user command will not be returned.

If user commands arrive at the LAN and service port simultaneously, both will be processed. It will be

processed individually, and return a response to each command to individual ports.

Revision History / Date

Changes

Revised by

Approved by

- 7 -

Download from Www.Somanuals.com. All Manuals Search And Download.

Projector WUX10 MarkII User Commands

4. Command System

MENU Control

INPUT

ASPECT

Display Setting

Input select

Aspect

Input signal settings

DOTS

TRACK

Total number of dots adjustment

Tracking adjustment

Horizontal/Vertical position adjustment

Horizontal/Vertical resolution adjustment

HPOS/VPOS

HPIX/VPIX

SEL

AUTOPC

Input signal selection

Auto PC

*User commands use only automatic selection of input signals.

*Running of Auto PC will change the values set in “Input signal settings”.

ＨＤＭＩ input level

ＨＤＭＩ overscan

Progressive

PROG

Menu display position setting

Screen color correction

RGB adjustment

ＷＢＲＧＢ

IMAGEFLIP

PROG

Flip display

Progressive

Screen when no signal

Screen when blank

Startup screen

NOSIG

BLANKCOLOR

PJON

User screen setting

Screen Aspect

SCRNASPECT

IMAGE

BRI

Image adjustment

Image quality select

Brightness setting

Contrast setting

Sharpness setting

Gamma correction

Color adjustment

CONT

SHARP

GAMMA

SAT

HUE

Color saturation setting

Hue setting

Color temperature setting

Gain adjustment

Offset adjustment

RGBGAIN

RGBOFFSET

Advanced adjustment

DGAMMA

FTONEADJ

6AXADJ

Dynamic gamma

Flesh color adjustment

6-axis color adjustment

６ＡＸＲ～Ｙ

6-axis adjustment

Reset

Ambient light

Type

Level

LAMP

RESET

Lamp mode setting

Image adjustment reset

RESET IMAGE

System setting

Auto setup

Power management mode

Direct power-on

Electronic sound

Key lock

PMM

DPON

BVOL

KEYLOCK

LANG

GUIDE

Language setting

Guide

LEDILLUMINATE

LED illumination

Slideshow interval

Other settings

RCCH

Remote control setting

Menu display time

Password setting

Password registration

Lamp counter reset

Network settings reset

Factory settings

RESET

RESET LAMPTIME

RESET SYSTEM

Revision History / Date

Changes

Revised by

Approved by

- 8 -

Download from Www.Somanuals.com. All Manuals Search And Download.

Projector WUX10 MarkII User Commands

Remote Control/Key

POWER

[POWER]

[AUTO SET]

[ASPECT]

[INPUT]

AUTOSETEXE

ASPECT

INPUT

AUTOPC

FCONTDRV / FSETPDRV

ZCONTDRV / ZSETPDRV

[AUTO PC]

[FOCUS]

[ZOOM]

*Running of Auto PC will change the values set in “Input signal settings”.

[D.SHIFT]

[KEYSTONE]

[MENU]

VKS

[D.ZOOM]

[VOL]

AVOL

FREEZE

BLANK

MUTE

[FREEZE]

[BLANK]

[MUTE]

IMAGE

[IMAGE]

[P-TIMER]

[LAMP]

LAMP

Emulate

MAIN

Key emulate

Remote control emulate

Reference

Retrieve each data

GET *****

※

Indicates functions that are available in the menu but not available in the user commands.

POWER

AUTO SET

KEYSTONE

FOCUS

ZOOM

INPUT

AUTOPC

↑

POWER

AUTOSET

POWER

AUTO SET

KEYSTONE

FOCUS

ZOOM

INPUT

AUTOPC

ASPECT

IMAGE

BLANK

MUTE

POWER

AUTOSET

KEYSTONE

FOCUS

ZOOM

KEYSTONE

FOCUS

ZOOM

INPUT

AUTOPC

ASPECT

IMAGE

BLANK

MUTING

VOL+

↓

DOWN

LEFT

←

→

RIGHT

VOL +

VOL -

VOL-

FREEXE

P-TIMER

LAMP

FREEZE

PTIMER

LAMP

DZOOM +

DZOOM -

↑

DZOOM+

DZOOM-

↓

DOWN

LEFT

←

→

RIGHT

Revision History / Date

Changes

Revised by

Approved by

- 9 -

Download from Www.Somanuals.com. All Manuals Search And Download.

Projector WUX10 MarkII User Commands

5. Command List

Item

Commands

Description

6AXADJ

6-axis adjustment ON/OFF

6AXR~Y

ASCOMBO_*

ASPECT

AUTOPC

AUTOSETEXE

AVOL

6-axis correction R-Y hue/saturation settings

Defines auto setup combination

Screen settings

Auto PC

Auto setup

Audio volume adjustment

BLANK function

BLANK

BLANKCOLOR

BRI

Screen when BLANK setting

Brightness setting

BVOL

BEEP sound setting

COMVER

CONT

User command version inquiry

Contrast setting

DGAMMA

DOTS

Dynamic gamma

Total number of dots adjustment

Direct power-on setting

Error information inquiry

Focus lens continuous drive control

Freeze status

DPON

ERR

FCONTDRV

FREEZE

FSTEPDRV

GAMMA

GUIDE

Focus lens step drive control

Gamma adjustment

Guide setting

HPIX / VPIX

HPOS / VPOS

HUE

Horizontal/Vertical resolution adjustment

Horizontal/Vertical position adjustment

Hue setting

IMAGE

Image mode setting

IMAGEFLIP

INPUT

Flip display

Input selection

KEYLOCK

LAMP

Keylock setting

Lamp output setting

LAMPCOUNTER

LANG

Lamp ON time inquiry

Language select

LEDILLUMINATE

LMPT

Emotional LED lighting control

Lamp time inquiry

MAIN

Front panel operation emulation

Flesh tone adjustment

Control mode switch

FTONEADJ

MODE

MUTE

Mute control

NOSIG

Display screen when no signal setting

Display screen at startup setting

PJON

Revision History / Date

Changes

Revised by

Approved by

- 10 -

Download from Www.Somanuals.com. All Manuals Search And Download.

Projector WUX10 MarkII User Commands

Item

Commands

Description

PMM

Power management

POWER

PRODCODE

PROG

This controls the power supply

Product information inquiry

Progressive setting

Remote control operation emulate

Remote control channel setting

Reset

RCCH

RESET

RGBGAIN

RGBOFFSET

ROMVER

SAT

RGB gain adjustment

RGB offset adjustment

ROM version inquiry

Color saturation setting

Screen aspect setting

SCRNASPECT

SEL

Input signal selection

SHARP

Sharpness setting

SIGNALSTATUS

TEMP

Signal status inquiry

Temperature inquiry

TMPL

Temperature limit inquiry

Tracking adjustment

TRACK

VKS

Vertical keystone setting

Screen color correction

Screen color correction (ADJUST)

Zoom lens continuous drive control

Zoom lens step drive control

WBRGB

ZCONTDRV

ZSTEPDRV

Revision History / Date

Changes

Revised by

Approved by

- 11 -

Download from Www.Somanuals.com. All Manuals Search And Download.

Projector WUX10 MarkII User Commands

6. Details of Command

Descriptions of each command are provided starting from the next page.

The command descriptions have the format shown below.

Alphabetic command name

This briefly describes the command function.

Format

This indicates the command format.

Environment

This defines the environments that support the command (power supply state, input signal state).

Power*1

OFF ON PM D-RGB A-RGB1 A-RGB2 COMP VIDEO HDMI

*2 *3 *4 *5 *5 *5 *5 *5 *5

Input

None

*1 Power

*2 OFF

*3 ON

Executable regardless of power supply state when marked by “-“.

“O” when power supply state is OFF.

“O” when power supply state is ON.

*4 PM

“O” when the power supply state is enabled while power management is in standby.

The command is enabled in states marked by “O”.

The command is executable regardless of input when marked by “-“.

Input signal is required when “X“.

*5 Input

*6 None

Response

This describes the command response.

Description

This includes the command function, conditions, and notes.

Example

This provides command usage examples.

Revision History / Date

Changes

Revised by

Approved by

- 12 -

Download from Www.Somanuals.com. All Manuals Search And Download.

Projector WUX10 MarkII User Commands

6AXADJ

6-axis adjustment ON/OFF

Format

6AXADJ=<6-axis adjustment parameter:ID>

GET□6AXADJ / ?△6AXADJ

<6-axis adjustment parameter:ID>

OFF

This sets the 6-axis adjustment to ON.

This sets the 6-axis adjustment to OFF.

Environment

Power

Input

OFF ON PM D-RGB A-RGB1 A-RGB2 COMP VIDEO HDMI

None

Response

"i:OK" is returned if the parameter was set properly.

For 'GET 6AXADJ' or '?6AXADJ', current 6-axis adjustment state is returned in

'g:6AXADJ=<6-axis adjustment parameter:ID>'

For details on other responses, refer to the "Error List".

Description

(1) This command is used to select ON or OFF for the 6-axis adjustment.

(2) This command functions in the same way as when "Image adjustments" - "Advanced

adjustments" - "6-axis adjustment" are selected on the menu.

(3) In the case of "6-axis adjustment," set the hue and color saturation of each axis using the

6AXR to Y "6-axis correction R to Y hue/color saturation setting" commands.

(4) This sets the currently selected input signal and image mode.

(5) The current 6-axis adjustment setting can be obtained using the GET command. ("GET

6AXADJ"）

Example

Control

> 6AXADJ=ON

The 6-axis adjustment is set to ON.

< i:OK

Reference

> GET 6AXADJ or ?6AXADJ

The 6-axis adjustment ON or OFF setting is obtained.

< g:6AXADJ=ON

*Commands are indicated by ">", and responses are indicated by "<".

Revision History / Date

Changes

Revised by

Approved by

- 13 -

Download from Www.Somanuals.com. All Manuals Search And Download.

Projector WUX10 MarkII User Commands

6AXR-Y

6-axis correction R-Y hue/saturation settings

Format

6AXR=<R hue:Number>▽<R saturation:Number>

6AXG=<G hue:Number>▽<G saturation:Number>

6AXB=<B hue:Number>▽<B saturation:Number>

6AXC=<C hue:Number>▽<C saturation:Number>

6AXM=<M hue:Number>▽<M saturation:Number>

6AXY=<Y hue:Number>▽<Y saturation:Number>

GET□6AXR / ?△6AXR

GET□6AXG / ?△6AXG

GET□6AXB / ?△6AXB

GET□6AXC / ?△6AXC

GET□6AXM / ?△6AXM

GET□6AXY / ?△6AXY

Setting values for <R/G/B/C/M/Y hue:Number> are -20 to 20.

Setting values for <R/G/B/C/M/Y saturation:Number> are -20 to 20.

Environment

Power

Input

OFF ON PM D-RGB A-RGB1 A-RGB2 COMP VIDEO HDMI

None

Response

"i:OK" is returned if the parameter was set properly.

For 'GET 6AX*' or '?6AX*', current 6-axis correction R-Y hue/saturation settings are returned as

'g:6AX*=<*hue: Number>,<*saturation:Number>'

For details on other responses, refer to the "Error List".

Description

(1) This sets the 6-axis correction of the hue and color saturation for R to Y.

(2) This command functions in the same way as when "Image adjustments" - "Advanced

adjustments" - "6-axis color adjustment" are selected on the menu.

(3) If numerical parameters are outside the range, "e:0801 INVALID_VALUE" is returned.

(4) These commands take effect when they have been set to valid using the 6-axis adjustment

command (6AXADJ), and they can be set separately.

(5) This sets the currently selected input signal and image mode.

(6) The current 6-axis color correction can be obtained using the GET command. ("GET

6AXR/G/B/C/M/Y")

Example

Setting

> 6AXR=-8, 5

The R hue is set to –8, and the color saturation is set to 5.

This retrieves the R hue and color saturation.

< i:OK

Reference

> GET 6AXR or ?6AXR

< g:6AXR=12, -8

* Commands are indicated by ">", and responses are indicated by "<".

Revision History / Date

Changes

Revised by

Approved by

- 14 -

Download from Www.Somanuals.com. All Manuals Search And Download.

Projector WUX10 MarkII User Commands

ASCOMBO_*

Defines auto setup combination

Format

ASCOMBO_AF=<Auto set combination parameter:ID>

ASCOMBO_AVK=<Auto set combination parameter:ID>

ASCOMBO_AINP=<Auto set combination parameter:ID>

ASCOMBO_ASC=<Auto set combination parameter:ID>

GET□ASCOMBO_AF / ? ASCOMBO_AF

GET□ASCOMBO_AVK / ? ASCOMBO_AVK

GET□ASCOMBO_AINP / ? ASCOMBO_AINP

GET□ASCOMBO_ASC / ? ASCOMBO_ASC

Combine

OFF

Do not combine

Environment

Power

Input

OFF ON PM D-RGB A-RGB1 A-RGB2 COMP VIDEO HDMI

None

Response

"i:OK" is returned if automatic setup combination was set properly.

For 'GET ASCOMBO_*' or '? ASCOMBO_*', current auto setup sequence combination is returned as

'g:ASCOMBO_*=ON' or

'g:ASCOMBO_*=OFF'

For details on other responses, refer to the "Error List".

Description

(1) This sets whether to combine a sequence in the auto setup.

(2) This command functions in the same way as when "System settings" - "Auto setup" are

selected on the menu.

(3) Even if it has been set using this command, AUTOSETEXE may not be executed depending on

other status of the projector (screen aspect, etc.).

(4) Also refer to the AUTOSETEXE command.

(5) The current auto setup combination can be obtained using the GET command.

Example

Setting

> ASCOMBO_AF=ON

Auto focusing is executed during auto setup execution.

< i:OK

Reference

> GET ASCOMBO_AVK or ?ASCOMBO_AVK Auto focus execution setting in current auto setup is obtained.

< g:ASCOMBO_AVK=ON

* Commands are indicated by ">", and responses are indicated by "<".

Revision History / Date

Changes

Revised by

Approved by

- 15 -

Download from Www.Somanuals.com. All Manuals Search And Download.

Projector WUX10 MarkII User Commands

ASPECT

Screen settings

Format

ASPECT=<Screen setting parameters:ID>

GET□ASPECT / ?△ASPECT

AUTO

4:3

Auto

4:3

16:9

FULL

Full screen

ZOOM

TRUE

Zoom

Real

Environment

Power

Input

OFF ON PM Parameter D-RGB A-RGB1 A-RGB2 COMP VIDEO HDMI

None

AUTO

4:3

○

16:9

FULL

ZOOM

TRUE

*1 Valid when screen aspect (16:9 or 16:9 DIS) and SD signals

*2 Settable when screen aspect (16:9 or 16:9 DIS)

*3 Progressive allowable (however, 1080p is non-allowable)

*4 Allowable/Non-Allowable differs according to selected input signal

*5 Settable when screen aspect (16:10)

Response

"i:OK" is returned if the parameter was set properly.

For 'GET ASPECT' or '?ASPECT', current screen display mode is returned as

'g:ASPECT=<Screen setting parameters:ID>'

For details on other responses, refer to the "Error List".

Description

(1) This sets the screen sizes.

(2) This command functions in the same way as when "Display settings" - "Aspect" are selected on

the menu.

(3) If the command cannot be supported, 'INVALID_SOURCE' is returned as an error response.

(4) If the necessary signals are not input, 'NO_SIGNAL' is returned.

(5) The final screen settings are retained even when the power is turned off. However, the screen

settings may be different if the input terminal or input signal is changed.

(6) The GET command can be used to retrieve the current screen display mode. ("GET ASPECT")

Revision History / Date

Changes

Revised by

Approved by

- 16 -

Download from Www.Somanuals.com. All Manuals Search And Download.

Projector WUX10 MarkII User Commands

Example

Setting

> ASPECT=16:9

This sets the screen size to WIDE.

> i:OK

Reference

> GET ASPECT or ?ASPECT

< g:ASPECT=TRUE

This retrieves the screen size.

* Commands are indicated by ">", and responses are indicated by "<".

Revision History / Date

Changes

Revised by

Approved by

- 17 -

Download from Www.Somanuals.com. All Manuals Search And Download.

Projector WUX10 MarkII User Commands

AUTOPC

Auto PC

Format

AUTOPC

Environment

Power

Input

OFF ON PM D-RGB A-RGB1 A-RGB2 COMP VIDEO HDMI

None

Response

"i:OK" is returned if the control was executed properly.

For details on other responses, refer to the "Error List".

Description

(1) This executes Auto PC.

(2) This command is identical to pressing the “AUTOPC” button on the remote control.

(3) If the input is neither "A-RGB1" nor "A-RGB2", 'e:200X INVALID_SOURCE(***)' is returned

as an error response.

(4) If signals are not input, "e:2010 NO_SIGNAL" is returned.

(5) Execution of this command may modify the following setting values.

・Total number of dots

・Tracking

・Horizontal/vertical positions

・Number of horizontal/vertical display dots

(6) To confirm modified setting values, use the GET command of the respective parameter.

For details, refer to the GET commands below.

Setting

Total number of dots

Tracking

GET

GET DOTS

GET TRACK

GET HPOS

GET VPOS

Horizontal position

Vertical position

Number of horizontal display dots GET HPIX

Number of vertical display dots GET VPIX

Example

> AUTOPC

< i:OK

* Commands are indicated by ">", and responses are indicated by "<".

Revision History / Date

Changes

Revised by

Approved by

- 18 -

Download from Www.Somanuals.com. All Manuals Search And Download.

Projector WUX10 MarkII User Commands

AUTOSETEXE

Auto setup

Format

AUTOSETEXE□<Auto set parameter:ID>

FOCUS

VKS

Auto focusing

Auto keystone (vertical) execution

SCRN

INPUT

Automatic screen color correction execution

Automatic signal sensing execution

Environment

Power

Input

OFF ON PM D-RGB A-RGB1 A-RGB2 COMP VIDEO HDMI

None

Response

“i:OK” is returned when the automatic processing was completed successfully.

For details on other responses, refer to the "Error List".

Description

(1) This command is used to execute auto setup.

(2) One of the following responses is returned if auto setup cannot be executed due to projector

settings.

Type

Projector

settings

Error response

FOCUS VKS SCRN INPUT

○

BLANK

FREEZE

D.ZOOM

DIS*

'e:1006 NOW_BLANK'

'e:1009 NOW_FREEZE'

'e:100A NOW_D.ZOOM'

○：Executable

'e:1008 INVALID_SCREEN_ASPECT'

×：Non-executable

* DIS:Digital Image Shift

(3) One of the following responses is returned if an error has been detected at any part of the auto

setup.

Type

FOCUS

VKS

Response

'e:F002 SYSTEM (AF)'

'e:F004 SYSTEM (AK)'

'e:F005 SYSTEM (ASC)'

SCRN

(4) If the input signal cannot be detected using the automatic signal sensing,

'i:INPUT_NOT_FOUND' is returned.

(5) When automatic screen color correction (SCRN) has been completed successfully, the screen

color correction (WB) is set to "ADJUST".

(6) There are no parameters to be executed together. Execute them separately.

Example

Setting

> AUTOSETEXE FOCUS

< i:OK

Auto focusing is executed.

* Commands are indicated by ">", and responses are indicated by "<".

Revision History / Date Changes

Revised by

Approved by

- 19 -

Download from Www.Somanuals.com. All Manuals Search And Download.

Projector WUX10 MarkII User Commands

AVOL

Audio volume adjustment

Format

AVOL=<Audio volume level:Number>

GET□AVOL / ?△AVOL

Setting values for <Audio volume level:Number> are 0 to 20.

Environment

Power

Input

OFF ON PM D-RGB A-RGB1 A-RGB2 COMP VIDEO HDMI

None

Response

"i:OK" is returned if the parameter was set properly.

For 'GET AVOL' or '?AVOL', current audio volume level is returned as

'g:AVOL=<Audio volume level:Number>'

For details on other responses, refer to the "Error List".

Description

(1) This adjusts the volume.

(2) This command is identical to pressing the “VOL+” and "VOL-" button on the remote control or

the "VOL" on the front panel.

(3) If numerical parameters are outside the range, "e:0801 INVALID_VALUE" is returned.

(4) The volume level can be set even while the sound is muted.

(5) The GET command can be used to retrieve the current volume. ("GET AVOL")

Example

Setting

> AVOL=18

< i:OK

This sets the volume to 18.

This retrieves the volume.

Reference

> GET AVOL or ?AVOL

< g:AVOL=18

* Commands are indicated by ">", and responses are indicated by "<".

Revision History / Date

Changes

Revised by

Approved by

- 20 -

Download from Www.Somanuals.com. All Manuals Search And Download.

Projector WUX10 MarkII User Commands

BLANK

BLANK function

Format

BLANK=<BLANK parameter:ID>

GET□BLANK / ?△BLANK

OFF

BLANK ON

BLANK OFF.

Environment

Power

Input

OFF ON PM D-RGB A-RGB1 A-RGB2 COMP VIDEO HDMI

None

Response

"i:OK" is returned if the parameter was set properly.

For 'GET BLANK' or '?BLANK', current BLANK status is returned as

'g:BLANK=ON'

'g:BLANK=OFF'

For details on other responses, refer to the "Error List".

Description

(1) This command is used to set the BLANK function.

(2) This command is identical to pressing the “VOL+” and "VOL-" button.

(3) The current BLANK settings can be obtained using the GET command. ("GET BLANK")

Example

Setting

> BLANK=ON

< i:OK

BLANK is set to ON.

Reference

> GET BLANK or ?BLANK

< g:BLANK=ON

The current BLANK status is referenced.

* Commands are indicated by ">", and responses are indicated by "<".

Revision History / Date

Changes

Revised by

Approved by

- 21 -

Download from Www.Somanuals.com. All Manuals Search And Download.

Projector WUX10 MarkII User Commands

BLANKCOLOR

Screen when BLANK setting

Format

BLANKCOLOR=<Screen when BLANK setting parameter:ID>

GET□BLANKCOLOR / ?△BLANKCOLOR

BLACK

BLUE

Black screen

Blue screen

Environment

Power

Input

OFF ON PM D-RGB A-RGB1 A-RGB2 COMP VIDEO HDMI

None

Response

"i:OK" is returned if the parameter was set properly.

For 'GET BLANKCOLOR' or '?BLANKCOLOR', current screen when BLANK setting is returned as

'g:BLANKCOLOR=<BLANK display screen setting parameter:ID>'

For details on other responses, refer to the "Error List".

Description

(1) This command is used to set the screen when BLANK.

(2) This command functions in the same way as when "Display settings" - "User screen setting" -

"Screen when blank" are selected on the menu.

(3) The current screen when BLANK setting can be obtained using the GET command. ("GET

BLANKCOLOR")

Example

Setting

> BLANKCOLOR=BLACK

Set to "Black screen" when screen is BLANK.

Screen when BLANK setting is obtained.

< Ok

Reference

> GET BLANKCOLOR or ?BLANKCOLOR

< g:BLANKCOLOR=BLACK

* Commands are indicated by ">", and responses are indicated by "<".

Revision History / Date

Changes

Revised by

Approved by

- 22 -

Download from Www.Somanuals.com. All Manuals Search And Download.

Projector WUX10 MarkII User Commands

BRI

Brightness setting

Format

BRI=<Brightness setting:Number>

GET□BRI / ?△BRI

Setting values for <Brightness setting:Number> are -20 to 20.

Environment

Power

Input

OFF ON PM D-RGB A-RGB1 A-RGB2 COMP VIDEO HDMI

None

Response

"i:OK" is returned if the parameter was set properly.

For 'GET BRI' or '?BRI', current brightness is returned as

'g:BRI=<Brightness setting:Number>'

For details on other responses, refer to the "Error List".

Description

(1) This sets the screen brightness.

(2) This command functions in the same way as when "Image adjustments" - "Brightness" are

selected on the menu.

(3) If numerical parameters are outside the range, "e:0801 INVALID_VALUE" is returned.

(4) This sets the currently selected input signal and image mode.

(5) The current brightness can be acquired using the applicable GET command. ("GET BRI")

Example

Setting

> BRI=-10

This sets the brightness to -10.

This retrieves the brightness.

< i:OK

Reference

> GET BRI or ?BRI

< g:BRI=-10

* Commands are indicated by ">", and responses are indicated by "<".

Revision History / Date

Changes

Revised by

Approved by

- 23 -

Download from Www.Somanuals.com. All Manuals Search And Download.

Projector WUX10 MarkII User Commands

BVOL

BEEP sound setting

Format

BVOL=<Beep sound setting:Number>

GET□BVOL / ?△BVOL

BEEP sound mute

BEEP sound output

Environment

Power

Input

OFF ON PM D-RGB A-RGB1 A-RGB2 COMP VIDEO HDMI

None

Response

"i:OK" is returned if the parameter was set properly.

For 'GET BVOL' or '?BVOL', current BEEP sound setting is returned as

'g:BVOL=<Beep sound setting:Number>'

For details on other responses, refer to the "Error List".

Description

(1) This sets the BEEP sound output.

(2) This command functions in the same way as when "System setting" - "Electronic sound" are

selected on the menu.

(3) The beep sound can be set even while the sound is muted, but it will not sound even if (beep

sound output) has been set.

(4) The current beep sound output status can be acquired using the applicable GET command.

("GET BVOL")

Example

Setting

> BVOL=0

This mutes the BEEP sound.

< i:OK

Reference

> GET BVOL or ?BVOL

This retrieves the BEEP sound output state.

< g:BVOL=1

* Commands are indicated by ">", and responses are indicated by "<".

Revision History / Date

Changes

Revised by

Approved by

- 24 -

Download from Www.Somanuals.com. All Manuals Search And Download.

Projector WUX10 MarkII User Commands

COMVER

User command version inquiry

Format

GET□COMVER / ?△COMVER

Environment

Power

Input

OFF ON PM D-RGB A-RGB1 A-RGB2 COMP VIDEO HDMI

None

Response

Returns the user command version as

g:COMVER="<User command version:Character string>"

<User command version>:=99.9999

For details on other responses, refer to the "Error List".

Description

(1) This inquires about the user command version of the projector.

(2) This inquiry can be executed in any status provided that AC power is supplied to the projector.

(3) The user command version consists of a 2-digit number followed by a 4-digit number. Question

marks may appear in place of the numerals if the firmware has not been upgraded correctly.

(Example "??:????")

Example

> GET COMVER or ? COMVER

< g:COMVER="01.0000"

* Commands are indicated by ">", and responses are indicated by "<".

Revision History / Date

Changes

Revised by

Approved by

- 25 -

Download from Www.Somanuals.com. All Manuals Search And Download.

Projector WUX10 MarkII User Commands

CONT

Contrast setting

Format

CONT=<Contrast setting:Number>

GET□CONT / ?△CONT

Setting values for <Contrast setting:Number> are -20 to 20.

Environment

Power

Input

OFF ON PM D-RGB A-RGB1 A-RGB2 COMP VIDEO HDMI

None

Response

"i:OK" is returned if the parameter was set properly.

For 'GET CONT' or '?CONT', current contrast setting is returned as

'g:CONT=<Contrast setting:Number>'

For details on other responses, refer to the "Error List".

Description

(1) This sets the screen contrast.

(2) This command functions in the same way as when "Image adjustment" - "Contrast setting"

are selected on the menu.

(3) If numerical parameters are outside the range, "e:0801 INVALID_VALUE" is returned.

(4) This sets the currently selected input signal and image mode.

(5) The current contrast can be acquired using the applicable GET command. ("GET CONT")

Example

Setting

> CONT=3

This sets the contrast to +3.

This retrieves the contrast.

< i:OK

Reference

> GET CONT or ?CONT

< g:CONT=3

* Commands are indicated by ">", and responses are indicated by "<".

Revision History / Date

Changes

Revised by

Approved by

- 26 -

Download from Www.Somanuals.com. All Manuals Search And Download.

Projector WUX10 MarkII User Commands

DGAMMA

Dynamic gamma

Format

DGAMMA=<Dynamic gamma setting parameter:ID>

GET□DGAMMA / ?△DGAMMA

OFF

Off

WEAK

STRONG

Weak

Strong

Environment

Power

Input

OFF ON PM D-RGB A-RGB1 A-RGB2 COMP VIDEO HDMI

None

Response

"i:OK" is returned if the parameter was set properly.

For 'GET DGAMMA' or '?DGAMMA', current dynamic gamma setting is returned as

'g:DGAMMA=<Dynamic gamma setting parameter:ID>'

For details on other responses, refer to the "Error List".

Description

(1) The command is used to set the dynamic gamma function.

(2) This command functions in the same way as when "Image adjustment" - "Advanced

adjustment" - "Dynamic gamma" are selected on the menu.

(3) This sets the currently selected input signal and image mode.

(4) The current dynamic gamma function status can be acquired using the applicable GET

command. ("GET DGAMMA")

Example

Setting

> DGAMMA=WEAK

This sets the dynamic gamma function to WEAK.

This retrieves the dynamic gamma function state.

< i:OK

Reference

> GET DGAMMA or ?DGAMMA

< g:DGAMMA=WEAK

* Commands are indicated by ">", and responses are indicated by "<".

Revision History / Date

Changes

Revised by

Approved by

- 27 -

Download from Www.Somanuals.com. All Manuals Search And Download.

Projector WUX10 MarkII User Commands

DOTS

Total number of dots adjustment

Format

DOTS=<Number of dots:Number>

GET□DOTS / ?△DOTS

Environment

Power

Input

OFF ON PM D-RGB A-RGB1 A-RGB2 COMP VIDEO HDMI

None

Response

"i:OK" is returned if the parameter was set properly.

For 'GET DOTS' or '?DOTS', current total number of dots is returned as

'g:DOTS=<Number of dots:Number>'

For details on other responses, refer to the "Error List".

Description

(1) This designates the total number of dots for one horizontal period.

(2) This command functions in the same way as when "Display setting" - "Input signal settings" -

"Total number of dots" are selected on the menu.

(3) If the input is neither "A-RGB1" nor "A-RGB2", 'e:200X INVALID_SOURCE(***)' is returned

as an error response.

(4) If signals are not input, 'e:2010 NO_SIGNAL' is returned.

(5) Adjustment range is limited. If number is invalid, "e:0801 INVALID_VALUE" is returned.

(6) The GET command can be used to obtain the current total number of dots. ("GET DOTS")

Example

Setting

> DOTS=1650

The total number of dots is 1650.

< i:OK

Reference

> GET DOTS or ?DOTS

This retrieves the total number of dots.

< g:DOTS=1200

* Commands are indicated by ">", and responses are indicated by "<".

Revision History / Date

Changes

Revised by

Approved by

- 28 -

Download from Www.Somanuals.com. All Manuals Search And Download.

Projector WUX10 MarkII User Commands

DPON

Direct power-on setting

Format

DPON=<Direct power-on setting parameter:ID>

GET□DPON / ?△DPON

OFF

This sets direct power-on to ON.

This sets direct power-on to OFF.

Environment

Power

Input

OFF ON PM D-RGB A-RGB1 A-RGB2 COMP VIDEO HDMI

None

Response

"i:OK" is returned if the parameter was set properly.

For 'GET DPON' or '?DPON', current direct power-on setting is returned as

'g:DPON=<Direct power-on setting parameter:ID>'

For details on other responses, refer to the "Error List".

Description

(1) This command is used to set direct power-on function to ON or OFF.

(2) This command functions in the same way as when "System setting" - "Direct power-on" are

selected on the menu.

(3) Direct power-on cannot be set to ON when "OFF" has been selected as the power management

setting (PMM=OFF).

("e:1004 POWER_MANAGEMENT_OFF" is returned.)

(4) The current direct power-on setting can be obtained using the GET command. ("GET DPON")

Example

Setting

> DPON=ON

Direct power-on is set to ON.

< i:OK

Reference

> GET DPON on ?DPON

The current direct power-on setting is obtained.

< g:DPON=ON

* Commands are indicated by ">", and responses are indicated by "<".

Revision History / Date

Changes

Revised by

Approved by

- 29 -

Download from Www.Somanuals.com. All Manuals Search And Download.

Projector WUX10 MarkII User Commands

ERR

Error information inquiry

Format

GET□ERR / ?△ERR

Environment

Power

Input

OFF ON PM D-RGB A-RGB1 A-RGB2 COMP VIDEO HDMI

None

Response

Returns the current error information as

'g:ERR=<ErrorID:Character string>'

<ErrorID:Character string>

NO_ERROR

No error

ABNORMAL_TEMPERATURE Temperature error

FAULTY_LAMP

Lamp error

FAULTY_LAMP_COVER

FAULTY_COOLING_FAN

FAULTY_POWER_SUPPLY

FAULTY_AK

Lamp cover error

Cooling fan error

Power supply error

AK error

FAULTY_ASC

ASC error

FAULTY_AF

AF error

FAULTY_POWER_ZOOM

FAULTY_POWER_FOCUS

Zoom error

Focus error

For details on other responses, refer to the "Error List".

Description

(1) This inquires about the current error information.

(2) This inquiry can be executed in any status provided that AC power is supplied to the projector.

(3) Information when the warning LED of the projector is flashing can be obtained.

"NO_ERROR" is returned when the warning LED is not lighted.

Example

> GET ERR or ? ERR

< g:ERR=FAULTY_LAMP

* Commands are indicated by ">", and responses are indicated by "<".

Revision History / Date

Changes

Revised by

Approved by

- 30 -

Download from Www.Somanuals.com. All Manuals Search And Download.

Projector WUX10 MarkII User Commands

FCONTDRV

Focus lens continuous drive control

Format

FCONTDRV=<Focus lens continuous control parameter:ID>

STOP

FAR

NEAR

This stops the focusing.

This initiates focusing toward the far end.

This initiates focusing toward the near end.

Environment

Power

Input

OFF ON PM D-RGB A-RGB1 A-RGB2 COMP VIDEO HDMI

None

Response

"i:OK" is returned when the drive was completed successfully.

For details on other responses, refer to the "Error List".

Description

(1) This command is used to drive the focus lens.

(2) This command functions in the same way as when first the "FOCUS" button on the remote

control or main unit panel is pressed and then the "↑" or "↓" button is pressed.

(3) Focus drive is started by specifying "NEAR" or "FAR".

To stop the drive, add the "STOP" parameter and send this command.

If no instruction was given to stop the drive, the drive stops at the drive direction end.

(4) The following commands are acknowledged during focus drive, but focus drive will also stop at

the same time.

a. POWER

b. FCONTDRV=STOP

(5) The following commands are acknowledged during focus drive, and a response is returned

while the drive continues.

a. GET MODE

b. GET POWER

c. GET ERR

e. GET PRODCODE

f. GET ROMVER

g. GET COMVER

h. REMOTE

i. LOCAL

j. RC

k. MAIN

l. [NULL]

d. GET LAMPCOUNTER

(6) For other commands not included in (4) nor (5), "i:BUSY (FOCUS)" is returned, and focus

drive continues.

(7) There are no GET commands available for this command.

Example

Control

> FCONTDRV=NEAR

Control over the focusing to the near end is started.

< i:OK

* Commands are indicated by ">", and responses are indicated by "<".

Revision History / Date

Changes

Revised by

Approved by

- 31 -

Download from Www.Somanuals.com. All Manuals Search And Download.

Projector WUX10 MarkII User Commands

FREEZE

Freeze status

Format

FREEZE=<FREEZE parameter:ID>

GET□FREEZE / ?△FREEZE

Image now frozen

OFF

Image now not frozen

Environment

Power

Input

OFF ON PM D-RGB A-RGB1 A-RGB2 COMP VIDEO HDMI

None

Response

"i:OK" is returned if the parameter was set properly.

For 'GET FREEZE' or '?FREEZE', current freeze status is returned as

'gFREEZE=ON'

'g:FREEZE=OFF'

For details on other responses, refer to the "Error List".

Description

(1) This command is used to freeze the image.

(2) This command is identical to pressing the “FREEZE” button on the remote control.

(3) The current freeze status can be obtained using the GET command. ("GET FREEZE")

Example

Setting

> FREEZE=ON

Freezes image.

< i:OK

Reference

> GET FREEZE or ?FREEZE

The current freeze status is referenced.

< g:FREEZE=ON

* Commands are indicated by ">", and responses are indicated by "<".

Revision History / Date

Changes

Revised by

Approved by

- 32 -

Download from Www.Somanuals.com. All Manuals Search And Download.

Projector WUX10 MarkII User Commands

FSTEPDRV

Focus lens step drive control

Format

FSTEPDRV=<Focus lens step control parameter:ID>

FAR

NEAR

This initiates focusing toward the far end.

This initiates focusing toward the near end.

Environment

Power

Input

OFF ON PM D-RGB A-RGB1 A-RGB2 COMP VIDEO HDMI

None

Response

"i:OK" is returned when focusing was completed successfully after step drive.

For details on other responses, refer to the "Error List".

Description

(1) This command is used to drive the focus lens.

(2) This command functions in the same way as when first the "FOCUS" button on the remote

control or main unit panel is pressed and then the "←" or "→" button is pressed.

(3) The amount by which the lens is focused is constant, and it is fixed for the system.

(4) If a focusing error occurs, step drive cannot be controlled.

(5) There are no GET commands available for this command.

Example

Control

> FSTEPDRV=NEAR

1-step control is exercised over the focus toward the NEAR end.

< I:OK

* Commands are indicated by ">", and responses are indicated by "<"..

Revision History / Date

Changes

Revised by

Approved by

- 33 -

Download from Www.Somanuals.com. All Manuals Search And Download.

Projector WUX10 MarkII User Commands

FTONEADJ

Flesh tone adjustment

Format

FTONEADJ=<Flesh tone adjustment parameter:ID>

GET□FTONEADJ / ?△FTONEADJ

OFF

No adjustment

FTONE_L

FTONE_M

FTONE_H

Flesh tone adjustment - light

Flesh tone adjustment - medium

Flesh tone adjustment - heavy

Environment

Power

Input

OFF ON PM D-RGB A-RGB1 A-RGB2 COMP VIDEO HDMI

None

Response

"i:OK" is returned when flesh tone has been adjusted successfully.

For 'GET FTONEADJ' or '?FTONEADJ', current flesh tone adjustment is returned as

'g:FTONEADJ=<Flesh tone adjustment parameter:ID>'

For details on other responses, refer to the "Error List".

Description

(1) This command is used by selecting "No adjustment", "Flesh tone adjustment - light" to "Flesh

tone adjustment - heavy".

(2) This command functions in the same way as when "Image adjustment" - "Advanced

adjustment" - "Flesh tone adjustment" are selected on the menu.

(3) This sets the currently selected input signal and image mode.

(4) The current flesh tone adjustment setting can be obtained using the GET command. ("GET

FTONEADJ")

(5) With the WUX10, "Memory color adjustment" function is not available.

Example

Control

> FTONEADJ=FTONE_M

This sets the tone adjustment to "Flesh tone adjustment - medium".

< i:OK

Reference

> GET FTONEADJ or ?FTONEADJ

This retrieves the flesh tone adjustment level.

< g:FTONEADJ=FTONE_M

* Commands are indicated by ">", and responses are indicated by "<".

Revision History / Date

Changes

Revised by

Approved by

- 34 -

Download from Www.Somanuals.com. All Manuals Search And Download.

Projector WUX10 MarkII User Commands

GAMMA

Gamma adjustment

Format

GAMMA=<Gamma adjustment:Number>

GET□GAMMA / ?△GAMMA

Setting values for <Gamma adjustment: Number> are -10 to 10.

Environment

Power

Input

OFF ON PM D-RGB A-RGB1 A-RGB2 COMP VIDEO HDMI

None

Response

"i:OK" is returned if the parameter was set properly.

For 'GET GAMMA' or '?GAMMA', current gamma adjustment is returned as

'g:GAMMA=<Gamma adjustment:Number>'

For details on other responses, refer to the "Error List".

Description

(1) This performs the Gamma adjustment.

(2) This command functions in the same way as when "Image adjustment" - "Gamma adjustment"

are selected on the menu.

(3) If numerical parameters are outside the range, "e:0801 INVALID_VALUE" is returned.

(4) This sets the currently selected input signal and image mode.

(5) The current gamma adjustment can be acquired using the applicable GET command. ("GET

GAMMA")

Example

Setting

> GAMMA=-1

This sets the gamma correction to –1.

This retrieves the gamma adjustment.

< i:OK

Reference

> GET GAMMA or ?GAMMA

< g:GAMMA=3

* Commands are indicated by ">", and responses are indicated by "<".

Revision History / Date

Changes

Revised by

Approved by

- 35 -

Download from Www.Somanuals.com. All Manuals Search And Download.

Projector WUX10 MarkII User Commands

GUIDE

Guide setting

Format

GUIDE=<Guide setting parameter:ID>

GET□GUIDE / ?△GUIDE

OFF

Guide display ON

Guide display OFF

Environment

Power

Input

OFF ON PM D-RGB A-RGB1 A-RGB2 COMP VIDEO HDMI

None

Response

"i:OK" is returned if the parameter was set properly.

For 'GET GUIDE' or '?GUIDE', current guide setting is returned as

'g:GUIDE=<Guide setting parameter:ID>'

For details on other responses, refer to the "Error List".

Description

(1) This command is used to set the guide function display to ON or OFF.

(2) This command functions in the same way as when "System setting" - "Guide" are selected on

the menu.

(3) The guide is cleared immediately when "GUIDE=OFF" is received while the guide is

displayed.

(4) The current guide setting can be obtained using the GET command. ("GET GUIDE")

Example

Setting

> GUIDE=ON

The guide display is set to ON.

< i:OK

Reference

> GET GUIDE or ?GUIDE

The guide display setting status is obtained.

< g:GUIDE=ON

* Commands are indicated by ">", and responses are indicated by "<".

Revision History / Date

Changes

Revised by

Approved by

- 36 -

Download from Www.Somanuals.com. All Manuals Search And Download.

Projector WUX10 MarkII User Commands

HPIX/VPIX

Horizontal/Vertical resolution adjustmen

Format

HPIX=<Horizontal resolution:Number>

VPIX=<Vertical resolution:Number>

GET□HPIX / ?△HPIX

GET□VPIX / ?△VPIX

Environment

Power

Input

OFF ON PM D-RGB A-RGB1 A-RGB2 COMP VIDEO HDMI

None

Response

"i:OK" is returned if the parameter was set properly.

For 'GETHPIX' or '?HPIX' ('GETVPIX' or '?VPIX'), current horizontal (vertical) resolution is returned as

'g:HPIX=<Horizontal resolution:Number>'

（'g:VPIX=<Vertical resolution:Number>'）

For details on other responses, refer to the "Error List".

Description

(1) This adjusts the horizontal and vertical resolution (number of dots) on the screen.

(2) This command functions in the same way as when "Display setting" - "Input signal settings" -

"Horizontal resolution adjustment" or "Vertical resolution adjustment" are selected on the

menu.

(3) If the input is neither "A-RGB1" nor "A-RGB2", 'e:200X INVALID_SOURCE(***)' is returned

as an error response.

(4) If signals are not input, 'e:2010 NO_SIGNAL' is returned.

(5) Adjustment range is limited. If number is invalid, "e:0801 INVALID_VALUE" is returned.

(6) The GET command can be used to retrieve the current horizontal and vertical position. ("GET

HPIX" "GET VPIX")

Example

Setting

> HPIX=1024

This sets the horizontal resolution to 1024.

This retrieves the vertical resolution.

< i:OK

Reference

> GET VPIX or ?VPIX

< g:VPIX= 864

* Commands are indicated by ">", and responses are indicated by "<".

Revision History / Date

Changes

Revised by

Approved by

- 37 -

Download from Www.Somanuals.com. All Manuals Search And Download.

Projector WUX10 MarkII User Commands

HPOS/VPOS

Horizontal/Vertical position adjustment

Format

HPOS=<Horizontal position:Number>

VPOS=<Vertical position:Number>

GET□HPOS / ?△HPOS

GET□VPOS / ?△VPOS

Environment

Power

Input

OFF ON PM D-RGB A-RGB1 A-RGB2 COMP VIDEO HDMI

None

Response

"i:OK" is returned if the parameter was set properly.

For 'GET HPOS' or '?HPOS' ('GET VPOS' or '?VPOS'), current horizontal (vertical) position is returned as

'g:HPOS=<Horizontal position:Number>'

（'g:VPOS=<Vertical position:Number>'）

For details on other responses, refer to the "Error List".

Description

(1) This adjusts the horizontal and vertical position on the screen.

(2) This command functions in the same way as when "Display setting" - "Input signal settings" -

"Horizontal position adjustment" or "Vertical position adjustment" are selected on the menu.

(3) If the input is neither "A-RGB1" nor "A-RGB2", 'e:200X INVALID_SOURCE(***)' is returned

as an error response.

(4) If signals are not input, 'e:2010 NO_SIGNAL' is returned.

(5) Adjustment range is limited. If number is invalid, "e:0801 INVALID_VALUE" is returned.

(6) The GET command can be used to retrieve the current horizontal and vertical position. ("GET

HPOS" "GET VPOS")

Example

Setting

>HPOS=12

This sets the horizontal position to 12.

This acquires the vertical position.

<i:OK

Reference

>GET VPOS or ?VPOS

<g:VPOS=8

* Commands are indicated by ">", and responses are indicated by "<".

Revision History / Date

Changes

Revised by

Approved by

- 38 -

Download from Www.Somanuals.com. All Manuals Search And Download.

Projector WUX10 MarkII User Commands

HUE

Hue setting

Format

HUE=<Hue setting value:Number>

GET□HUE / ?△HUE

Setting values for <Hue setting value:Number> are -20 to 20.

Environment

Power

Input

OFF ON PM D-RGB A-RGB1 A-RGB2 COMP VIDEO HDMI

None

Response

"i:OK" is returned if the parameter was set properly.

For 'GET HUE' or '?HUE', current hue setting is returned as

'g:HUE=<Hue setting value:Number>'

For details on other responses, refer to the "Error List".

Description

(1) This sets the screen hue.

(2) This command functions in the same way as when "Image adjustment" - "Color adjustment" -

"Hue setting" are selected on the menu.

(3) If the input is neither "COMP" nor "VIDEO", 'e:200X INVALID_SOURCE(***)' is returned as

an error response.

(4) When input is "VIDEO" and signals are not input, 'e:2010 NO_SIGNAL' is returned.

(5) If numerical parameters are outside the range, "e:0801 INVALID_VALUE" is returned.

(6) This sets the currently selected input signal and image mode.

(7) The GET command can be used to retrieve the current hue. ("GET HUE")

Example

Setting

>HUE=8

This sets the hue to +8.

This retrieves the hue.

<i:OK

Reference

>GET HUE or ?HUE

<g:HUE=1

* Commands are indicated by ">", and responses are indicated by "<".

Revision History / Date

Changes

Revised by

Approved by

- 39 -

Download from Www.Somanuals.com. All Manuals Search And Download.

Projector WUX10 MarkII User Commands

IMAGE

Image mode setting

Format

IMAGE=<Image mode setting parameter:ID>

GET□IMAGE / ?△IMAGE

STANDARD

Standard

PRESENTATION Presentation

SRGB

sRGB

Movie

MOVIE

PHOTO

DCM_SIM

Environmental light compatible sRGB

DICOM monochrome *

* "e:000A INVALID_PARAMETER" is returned if the model is not DICOM compatible

Environment

Power

Input

OFF ON PM D-RGB A-RGB1 A-RGB2 COMP VIDEO HDMI

None

Response

"i:OK" is returned if the parameter was set properly.

For 'GET IMAGE' or '?IMAGE', current image mode is returned as

'g:IMAGE=<Image mode setting parameter:ID>'

For details on other responses, refer to the "Error List".

Description

(1) This sets the image quality.

(2) This command functions in the same way as when "Image adjustment" - "Image mode setting"

are selected on the menu.

(3) The final settings for the image mode are retained even when the power is turned off.

(4) Changing the setting may modify the following setting values.

Setting

Commands related to the settings

Brightness

Contrast

BRI

CONT

Sharpness

SHARP

Gamma adjustment

Dynamic gamma

GAMMA

DGAMMA

PROG

Progressive

Saturation/Hue

SAT/ HUE

MEMCADJ

RGBGAIN/RGBOFFSET

LAMP

Memory color adjustment

RGB gain/offset adjustment

Lamp mode

6-axis adjustment

6-axis color correction

6AXADJ

6AXR～Y

(5) The current image quality can be acquired using the applicable GET command. ("GET IMAGE")

Revision History / Date

Changes

Revised by

Approved by

- 40 -

Download from Www.Somanuals.com. All Manuals Search And Download.

Projector WUX10 MarkII User Commands

Example

Setting

> IMAGE=PRESENTATION

This sets the image mode to "Presentation".

< i:OK

Reference

> GET IMAGE or ?IMAGE

This references the current image mode.

< g:IMAGE=CINEMA

* Commands are indicated by ">", and responses are indicated by "<".

Revision History / Date

Changes

Revised by

Approved by

- 41 -

Download from Www.Somanuals.com. All Manuals Search And Download.

Projector WUX10 MarkII User Commands

IMAGEFLIP

Flip display

Format

IMAGEFLIP=<Image flip setting parameters:ID>

GET□IMAGEFLIP / ?△IMAGEFLIP

NONE

None

CEILING

REAR

Ceiling, Flip horizontally

Rear, Flip vertically

REAR_CEILING

Rear ceiling, Flip horizontally and vertically

Environment

Power

Input

OFF ON PM D-RGB A-RGB1 A-RGB2 COMP VIDEO HDMI

None

Response

"i:OK" is returned if the parameter was set properly.

For 'GET IMAGEFLIP' or '?IMAGEFLIP', current flip display setting is returned as

'g:IMAGEFLIP=<Image flip setting parameters:ID>'

For details on other responses, refer to the "Error List".

Description

(1) This command is used to flip the screen display in various ways (vertically or horizontally).

(2) This command functions in the same way as when "Display setting" - "Flip display" are

selected on the menu.

(3) When the display is flipped, the "keystone distortion" settings are initialized (set to VKS:0).

(4) The current flip display status can be acquired using the applicable GET command. ("GET

IMAGEFLIP")

Example

Setting

> IMAGEFLIP=REAR

This displays the image backwards (flip vertically) on the screen.

< i:OK

Reference

> GET IMAGEFLIP or ?IMAGEFLIP

This retrieves the flip display state.

< g:IMAGEFLIP=REAR_CEILING

* Commands are indicated by ">", and responses are indicated by "<".

Revision History / Date

Changes

Revised by

Approved by

- 42 -

Download from Www.Somanuals.com. All Manuals Search And Download.

Projector WUX10 MarkII User Commands

INPUT

Input selection

Format

INPUT=<Input selection parameters:ID>

GET□INPUT / ?△INPUT

D-RGB

A-RGB1

A-RGB2

COMP

VIDEO

HDMI

D-RGB

A-RGB1

A-RGB2

Component

Video

HDMI

Environment

Power

Input

OFF ON PM D-RGB A-RGB1 A-RGB2 COMP VIDEO HDMI

None

Response

"i:OK" is returned if the parameter was set properly.

For 'GET INPUT' or '?INPUT', current input selection is returned as

'g:INPUT=<Input selection parameters:ID>'

For details on other responses, refer to the "Error List".

Description

(1) This controls the input selection.

(2) This command is identical to pressing the “INPUT” button on the remote control.

(3) The input can be selected automatically using the auto setup command

(AUTOSETEXE=INPUT).

(4) The current input can be acquired using the applicable GET command. ("GET INPUT")

Example

Setting

> INPUT=VIDEO

The input is set to VIDEO.

< i:OK

Reference

> GET INPUT or ?INPUT

This retrieves the input signal.

< g:INPUT=A-RGB1

* Commands are indicated by ">", and responses are indicated by "<".

Revision History / Date

Changes

Revised by

Approved by

- 43 -

Download from Www.Somanuals.com. All Manuals Search And Download.

Projector WUX10 MarkII User Commands

KEYLOCK

Keylock setting

Format

KEYLOCK=<Key lock setting parameters:ID>

GET□KEYLOCK / ?△KEYLOCK

OFF

MAIN

No locking (OFF)

Main key lock

Remote control key lock

Environment

Power

Input

OFF ON PM D-RGB A-RGB1 A-RGB2 COMP VIDEO HDMI

None

Response

"i:OK" is returned if the parameter was set properly.

For 'GET KEYLOCK' or '?KEYLOCK', current keylocking setting is returned as

'g:KEYLOCK=<Key lock setting parameters:ID>'

For details on other responses, refer to the "Error List".

Description

(1) This command is used to lock the keys so as to restrict the operations performed using the

remote control or main unit.

(2) This command functions in the same way as when "System setting" - "Key lock" are selected

on the menu.

(3) This command will not affect the emulation function (remote control or main unit commands)

even if the main unit or remote control keys are locked.

(4) The current key lock setting can be acquired using the applicable GET command. ("GET

KEYLOCK")

Example

Setting

> KEYLOCK=RC

This locks the remote control keys.

This retrieves the key lock state.

< i:OK

Reference

> GET KEYLOCK or ?KEYLOCK

< g:KEYLOCK=OFF

* Commands are indicated by ">", and responses are indicated by "<".

Revision History / Date

Changes

Revised by

Approved by

- 44 -

Download from Www.Somanuals.com. All Manuals Search And Download.

Projector WUX10 MarkII User Commands

LAMP

Lamp output setting

Format

LAMP=<Lamp output setting parameters:ID>

GET□LAMP / ?△LAMP

NORMAL

SILENT

Normal

Silent cooling

Environment

Power

Input

OFF ON PM D-RGB A-RGB1 A-RGB2 COMP VIDEO HDMI

None

Response

"i:OK" is returned if the parameter was set properly.

For 'GET LAMP' or '?LAMP', current lamp output is returned as

'g:LAMP=<Lamp output setting parameters:ID>'

For details on other responses, refer to the "Error List".

Description

(1) This command is used to set the light quantity of the lamp to "NORMAL" or "SILENT"

(reduced light quantity appropriate for silent cooling).

(2) This command functions in the same way as when "Image adjustment" - "Lamp mode setting"

are selected on the menu.

(3) This sets the currently selected input signal and image mode.

(4) The current lamp output can be acquired using the applicable GET command. ("GET LAMP")

Example

Setting

> LAMP=NORMAL

< i:OK

The lamp output is set to “NORMAL”.

This retrieves the lamp output.

Reference

> GET LAMP or ?LAMP

< g:LAMP=SILENT

* Commands are indicated by ">", and responses are indicated by "<".

Revision History / Date

Changes

Revised by

Approved by

- 45 -

Download from Www.Somanuals.com. All Manuals Search And Download.

Projector WUX10 MarkII User Commands

LAMPCOUNTER

Lamp ON time inquiry

Format

GET□LAMPCOUNTER / ?△LAMPCOUNTER

Environment

Power

Input

OFF ON PM D-RGB A-RGB1 A-RGB2 COMP VIDEO HDMI

None

Response

Returns current lamp on time as

'g:LAMPCOUNTER="<Lamp ON time:Character string>"'

For details on other responses, refer to the "Error List".

Lamp ON time

"[G_______]"

"[GG______]"

"[GGG_____]"

"[GGGG____]"

"[GGGGG___]"

"[GGGGGY__]"

"[GGGGGYY_]"

"[GGGGGYYR]"

ON time:H

0～ 359

360～ 719

720～ 1079

1080～1439

1440～1799

1800～1899

1900～1999

2000～

For all other responses, refer to "Error List."

Description

(1) This inquires about the current lamp ON time.

(2) This inquiry can be executed in any status provided that AC power is supplied to the projector.

Example

> GET LAMPCOUNTER or ? LAMPCOUNTER

< g:LAMPCOUNTER="[GG______]"

* Commands are indicated by ">", and responses are indicated by "<".

Revision History / Date

Changes

Revised by

Approved by

- 46 -

Download from Www.Somanuals.com. All Manuals Search And Download.

Projector WUX10 MarkII User Commands

LANG

Language select

Format

LANG=<Language selection parameters:ID>

GET□LANG / ?△LANG

ENG

FRA

GER

ITA

SPA

POR

SWE

English

French

German

Italian

Spanish

Portuguese

Swedish

DUT Dutch

RUS Russian

CHS Chinese (simplified)

CHT Chinese (traditional)

KOR Korean

NOR Norwegian

TUR Turkish

POL Polish

HUN Hungarian

CZE Czech

JPN Japanese

FIN Finnish

ARA Arabic

DAN Danish

Environment

Power

Input

OFF ON PM D-RGB A-RGB1 A-RGB2 COMP VIDEO HDMI

None

Response

"i:OK" is returned if the parameter was set properly.

For 'GET LANG' or '?LANG', current selected language is returned as

'g:LANG=<Language selection parameters:ID>'

For details on other responses, refer to the "Error List".

Description

(1) This switches the screen display language.

(2) This command functions in the same way as when "System setting" - "Languages" are selected

on the menu.

(3) The currently set language can be acquired using the applicable GET command. ("GET LANG")

Example

Setting

> LANG=SWE

This sets the display language to “Swedish”.

This retrieves the language.

< i:OK

Reference

> GET LANG or ?LANG

< g:LANG=SWE

* Commands are indicated by ">", and responses are indicated by "<".

Revision History / Date

Changes

Revised by

Approved by

- 47 -

Download from Www.Somanuals.com. All Manuals Search And Download.

Projector WUX10 MarkII User Commands

LEDILLUMINATE

Emotional LED lighting control

Format

LEDILLUMINATE=<LED lighting control setting parameter:ID>

GET□LEDILLUMINATE / ?△LEDILLUMINATE

OFF

This sets the LED display to ON.

This sets the LED display to OFF.

Environment

Power

Input

OFF ON PM D-RGB A-RGB1 A-RGB2 COMP VIDEO HDMI

None

Response

"i:OK" is returned if the parameter was set properly.

For 'GET LEDILLUMINATE' or '?LEDILLUMINATE', current emotional LED lighting setting is returned as

'g:LEDILLUMINATE=<LED lighting control setting parameter:ID>'

For details on other responses, refer to the "Error List".

Description

(1) This command is used to control the lighting of the emotional LED.

(2) This command functions in the same way as when "System setting" - "LED illumination" are

selected on the menu.

(3) The current LED illumination setting can be obtained using the GET command. ("GET

LEDILLUMINATE")

Example

Setting

> LEDILLUMINATE=ON

The LED display is set to ON.

< i:OK

Reference

> GET LEDILLUMINATE or ?LEDILLUMINATE

The ON or OFF setting for the LED display is obtained.

< g:LEDILLUMINATE=ON

* Commands are indicated by ">", and responses are indicated by "<".

Revision History / Date

Changes

Revised by

Approved by

- 48 -

Download from Www.Somanuals.com. All Manuals Search And Download.

Projector WUX10 MarkII User Commands

LMPT

Lamp time inquiry

Format

GET□LMPT / ?△LMPT

LMPT=<ｈｈｈｈ>:<mm>

<hhhh>

Hours

0～65565

00～59

<mm>

Minutes

Environment

Power

Input

OFF ON PM D-RGB A-RGB1 A-RGB2 COMP VIDEO HDMI

None

Response

For 'GET LMPT' or '?LMPT', current lamp time is returned as

'g:LMPT=<hhhh>：<ｍｍ>'

For details on other responses, refer to the "Error List".

Description

(1) This inquires the lamp time. Value of 0h0m to 65565h59m is returned.

(2) Because inner equivalent value is returned, the hour of the lamp is not the same as the actual

hour.

(3) This inquiry can be executed during stand-by.

(4) There are no setting commands available.

Example

Setting

None

Reference

> GET LMPT

This retrieves the lamp time.

12 hours 34 minutes

< g:LMPT=12：34

* Commands are indicated by ">", and responses are indicated by "<".

Revision History / Date

Changes

Revised by

Approved by

- 49 -

Download from Www.Somanuals.com. All Manuals Search And Download.

Projector WUX10 MarkII User Commands

MAIN

Front panel operation emulation

Format

MAIN□<Main unit panel emulation button parameters:ID>

POWER

POWER_OFF, POWER button pressed twice

AUTO SET

INPUT

AUTOSET

INPUT

AUTOPC

KEYSTONE

AUTOPC

KEYSTONE

UP+REP, Button press start

DOWN

LEFT

DOWN

DOWN+REP, Button press start

LEFT

LEFT+REP, Button press start

RIGHT

RIGHT+REP, Button press start

FOCUS

ZOOM

FOCUS

ZOOM

*-REP, Button press end

* Use the application to adjust the time between pressing of keys.

Environment

Power

Input

OFF ON PM D-RGB A-RGB1 A-RGB2 COMP VIDEO HDMI

None

Response

"i:OK" is returned when the button press request has been acknowledged successfully.

(It does not indicate if the operation for the pressed button was executed properly.)

Description

(1) This emulates the pressing of the front panel buttons for controlling the projector.

(2) With the emulation of the front panel operations, the functions of the buttons corresponding to

the parameters cannot necessarily be executed. Emulation simply consists in emulating the

pressing of the buttons.

(3) A parameter with '+REP' signifies "button press start." (This is the same as the status in

which the front panel button is held down.)

Be absolutely sure to send the '*-REP' parameter, and end the button pressing last of all.

The button pressing is ended in the cases below as well.

<1> When a panel or remote control button has been operated

<2> When some command has been received

Example

Setting

> MAIN FOCUS

< i:OK

* Commands are indicated by ">", and responses are indicated by "<".

Revision History / Date

Changes

Revised by

Approved by

- 50 -

Download from Www.Somanuals.com. All Manuals Search And Download.

Projector WUX10 MarkII User Commands

MODE

Control mode switch

Format

REMOTE

LOCAL

GET□MODE /

?△MODE

Environment

Power

Input

OFF ON PM D-RGB A-RGB1 A-RGB2 COMP VIDEO HDMI

None

Response

"i:OK" is always returned with the control mode switch setting.

For 'GET MODE' or '?MODE', current control mode is returned as

'g:MODE=REMOTE'

'g:MODE=LOCAL'

For details on other responses, refer to the "Error List".

Description

(1) There are no 'local' and 'remote' control modes with this version of the user commands,

however, this command exists to maintain compatibility with previous versions of the user

commands.

(2) However, differences between previous versions of the user commands are as follows.

<1> Drive will not stop during zoom or focus. (Stopped with previous versions.)

<2> The power management standby status will not change. (Changed to "Power ON" (Lamp

ON) with previous versions.)

<3> The digital zoom will not change. (Cancelled with previous versions.)

<4> The presentation timer display will not change. (Cancelled with previous versions.)

<5> The BLANK status will not change. (Cancelled 'NoShow' with previous versions.)

<6> The FREEZE status will not change. (Cancelled FREEZE with previous versions.)

<7> Process under execution will continue. (Process was interrupted with previous versions.)

(3) The current control mode can be obtained using the GET command. ("GET MODE")

Example

Mode switch

> REMOTE

< i:OK

Mode reference

> GET MODE or ?MODE

< g:MODE=LOCAL

* Commands are indicated by ">", and responses are indicated by "<".

Revision History / Date

Changes

Revised by

Approved by

- 51 -

Download from Www.Somanuals.com. All Manuals Search And Download.

Projector WUX10 MarkII User Commands

MUTE

Mute control

Format

MUTE=<Mute control parameter: ID>

GET□MUTE / ?△MUTE

OFF

This turns off the audio/beep sound.

This returns the audio/beep sound to its original setting.

Environment

Power

Input

OFF ON PM D-RGB A-RGB1 A-RGB2 COMP VIDEO HDMI

None

Response

"i:OK" is returned if the parameter was set properly.

For 'GET MUTE' or '?MUTE', current mute setting is returned as

'g:MUTE=<Mute control parameter: ID>'

For details on other responses, refer to the "Error List".

Description

(1) This command is used to set the sound output muting to ON or OFF.

(2) Mute control enables simultaneous control of the audio and beep sound.

(3) This command is identical to pressing the MUTE button on the remote control.

(4) The mute setting is always "OFF" when the power has just been turned on.

(5) The volume can be set even when it is on "MUTE".

(6) The current muting status can be acquired using the applicable GET command. ("GET MUTE")

Example

Setting

> MUTE=ON

This mutes the volume.

< i:OK

Reference

> GET MUTE or ?MUTE

This retrieves the volume state.

< g:MUTE=ON

* Commands are indicated by ">", and responses are indicated by "<".

Revision History / Date

Changes

Revised by

Approved by

- 52 -

Download from Www.Somanuals.com. All Manuals Search And Download.

Projector WUX10 MarkII User Commands

NOSIG

Display screen when no signal setting

Format

NOSIG=<Parameters for setting display screen in no-signal mode:ID>

GET□NOSIG / ?△NOSIG

BLACK

BLUE

Black screen

Blue screen

Environment

Power

Input

OFF ON PM D-RGB A-RGB1 A-RGB2 COMP VIDEO HDMI

None

Response

"i:OK" is returned if the parameter was set properly.

For 'GET NOSIG' or '?NOSIG', current display screen when no signal setting is returned as

'g:NOSIG=<Parameters for setting display screen in no-signal mode:ID>'

For details on other responses, refer to the "Error List".

Description

(1) This sets the display screen when no image signals are input.

(2) This command functions in the same way as when "Display setting" - "User screen setting" -

"Screen when no signal" are selected on the menu.

(3) The GET command can be used to obtain the current display screen at no signal. ("GETNOSIG")

Example

Setting

> NOSIG=BLUE

This sets the “Blue” screen when no signals are input.

This retrieves the screen when no signals are input.

< i:OK

Reference

> GET NOSIG or ?NOSIG

< g:NOSIG=BLUE

* Commands are indicated by ">", and responses are indicated by "<".

Revision History / Date

Changes

Revised by

Approved by

- 53 -

Download from Www.Somanuals.com. All Manuals Search And Download.

Projector WUX10 MarkII User Commands

PJON

Display screen at startup setting

Format

PJON=<Parameters for setting display screen at startup:ID>

GET□PJON / ?△PJON

CANON

SKIP

Canon logo

No display

Environment

Power

Input

OFF ON PM D-RGB A-RGB1 A-RGB2 COMP VIDEO HDMI

None

Response

"i:OK" is returned if the parameter was set properly.

For 'GET PJON' or '?PJON', current display screen at startup setting is returned as

'g:PJON=<Parameters for setting display screen at startup:ID>'

For details on other responses, refer to the "Error List".

Description

(1) This sets the screen displayed at startup.

(2) This command functions in the same way as when "Display setting" - "User screen setting" -

"Startup screen" are selected on the menu.

(3) The GET command can be used to obtain the current screen displayed at startup. ("GETPJON")

Example

Setting

> PJON=CANON

This sets the startup screen to “Canon logo”.

This retrieves the startup screen.

< i:OK

Reference

> GET PJON or ?PJON

< g:PJON=SKIP

* Commands are indicated by ">", and responses are indicated by "<".

Revision History / Date

Changes

Revised by

Approved by

- 54 -

Download from Www.Somanuals.com. All Manuals Search And Download.

Projector WUX10 MarkII User Commands

PMM

Power management

Format

PMM=<Power management setting parameters:ID>

GET□PMM / ?△PMM

OFF

STANDBY

EXIT

Standby mode

Exit mode

Environment

Power

Input

OFF ON PM D-RGB A-RGB1 A-RGB2 COMP VIDEO HDMI

None

Response

"i:OK" is returned if the parameter was set properly.

For 'GET PMM' or '?PMM', current power management setting is returned as

'g:PMM=<Power management setting parameters:ID>'

For details on other responses, refer to the "Error List".

Description

(1) This sets the power management mode.

(2) This command functions in the same way as when "System setting" - "Power management

mode" are selected on the menu.

(3) Power management cannot be set to OFF if ON has been selected as the direct power-on

setting (DPON=ON).

("e:1005 DIRECT_POWER_ON" is returned)

(4) The current power management mode can be acquired using the applicable GET command.

("GET PMM")

Example

Setting

> PMM=STANDBY

This sets the power management to "standby".

This retrieves the power management mode.

< i:OK

Reference

> GET PMM or ?PMM

< g:PMM=EXIT

* Commands are indicated by ">", and responses are indicated by "<".

Revision History / Date

Changes

Revised by

Approved by

- 55 -

Download from Www.Somanuals.com. All Manuals Search And Download.

Projector WUX10 MarkII User Commands

POWER

This controls the power supply

Format

POWER□<Parameter:ID>

GET□POWER / ?△POWER

<Parameter:ID>

OFF

Power ON

Power OFF

Environment

Power

Input

OFF ON PM D-RGB A-RGB1 A-RGB2 COMP VIDEO HDMI

None

Response

"i:OK" is returned if the parameter was set properly.

For 'GET POWER' or '?POWER', current power supply status is returned as shown in the table below.

Response

Status

'g:POWER=OFF'

OFF

'g:POWER=OFF2ON'

'g:POWER=ON'

OFF -> ON in transition

g:POWER=ON2PMM'

'g:POWER=PMM'

ON -> Standby in transition

Standby

'g:POWER=PMM2ON'

'g:POWER=ON2OFF'

Standby -> ON in transition

ON -> OFF in transition

For details on other responses, refer to the "Error List".

Description

(1) This performs ON/OFF control of the power supply.

(2) This command is identical to pressing the POWER button on the remote control.

(3) Processing of other commands (including ZOOM/FOCUS) will be interrupted at "POWER

OFF" when the power is ON.

(4) 'i:BUSY' will be returned at "POWER ON" during power OFF transition. For other cases,

'I:OK' will always be returned.

(5) After sending this command, use GET POWER to obtain the power supply state at regular

intervals, and check that it is in the controlled state (off or on).

(6) The current power supply status can be referenced using the applicable GET command. ("GET POWER")

(7) Even when it is powered up by using this command, "Prepare for lamp replacement", "Lamp

replacement warning", "Clean filter warning" will display for 10 seconds as usual.

Example

Control

> POWER ON

< i:OK

Reference

> GET POWER or ?POWER

< g:POWER=OFF

* Commands are indicated by ">", and responses are indicated by "<".

Revision History / Date

Changes

Revised by

Approved by

- 56 -

Download from Www.Somanuals.com. All Manuals Search And Download.

Projector WUX10 MarkII User Commands

PRODCODE

Product information inquiry

Format

GET□PRODCODE / ?△PRODCODE

Environment

Power

Input

OFF ON PM D-RGB A-RGB1 A-RGB2 COMP VIDEO HDMI

None

Response

Product name is returned as

g:PRODCODE="<Product name:Character string>"

WUX10MarkII

WUX10MarkIIM

For details on other responses, refer to the "Error List".

Description

(1) This inquires about the product name of the projector.

(2) This inquiry can be executed in any status provided that AC power is supplied to the projector.

Example

> GET PRODCODE or ? PRODCODE

< g:PRODCODE="WUX10MarkII"

* Commands are indicated by ">", and responses are indicated by "<".

Revision History / Date

Changes

Revised by

Approved by

- 57 -

Download from Www.Somanuals.com. All Manuals Search And Download.

Projector WUX10 MarkII User Commands

PROG

Progressive setting

Format

PROG=<Progressive conversion setting parameters:ID>

GET□PROG / ?△PROG

OFF

AUTO

Environment

Power

Input

OFF ON PM D-RGB A-RGB1 A-RGB2 COMP VIDEO HDMI

None

Response

"i:OK" is returned if the parameter was set properly.

For 'GET PROG' or '?PROG', progressive conversion setting is returned as

'g:PROG=<Progressive conversion setting parameters:ID>'

For details on other responses, refer to the "Error List".

Description

(1) This command is used to set the progressive conversion processing to ON or OFF.

(2) This command functions in the same way as when "Display setting" - "Progressive" are

selected on the menu.

(3) This sets the currently selected input signal and image mode.

(4) The current value can be acquired using the applicable GET command. ("GET PROG")

The menu display statuses are as listed in the table below by model.

Menu display statuses, etc.

When signals from a progressive source are input, the progressive conversion setting

cannot be selected, and the field will be blank on the menu.

Example

Setting

> PROG=0

This sets the progressive conversion setting to OFF.

< i:OK

Reference

> GET PROG or ?PROG

This acquires the progressive conversion processing status.

< g:PROG=1

* Commands are indicated by ">", and responses are indicated by "<".

Revision History / Date

Changes

Revised by

Approved by

- 58 -

Download from Www.Somanuals.com. All Manuals Search And Download.

Projector WUX10 MarkII User Commands

Remote control operation emulate

Format

RC□<Remote control emulation button parameters:ID>

POWER

POWER_OFF, POWER button pressed twice

AUTO SET

INPUT

ASPECT

AUTOPC

KEYSTONE

AUTOSET

INPUT

ASPECT

AUTOPC

KEYSTONE

UP+REP, Button press start

DOWN

LEFT

DOWN

DOWN+REP, Button press start

LEFT

LEFT+REP, Button press start

RIGHT

RIGHT+REP, Button press start

IMAGE

FREEZE

VOL +

IMAGE

FREEZE

VOL_P

VOL_P+REP, Button press start

VOL -

VOL_M

VOL_M+REP, Button press start

BLANK

MUTE

BLANK

MUTE

P-TIMER

LAMP

P_TIMER

LAMP

DZOOM +

DZOOM_P

DZOOM_P+REP, Button press start

DZOOM_M

DZOOM -

DZOOM_M+REP, Button press start

FOCUS

ZOOM

FOCUS

ZOOM

*-REP, Button press start

* Use the application to adjust the time between pressing of keys.

Environment

Power

Input

OFF ON PM D-RGB A-RGB1 A-RGB2 COMP VIDEO HDMI

None

Response

"i:OK" is returned when the button press request has been acknowledged successfully.

(It does not indicate if the operation for the pressed button was executed properly.)

Revision History / Date

Changes

Revised by

Approved by

- 59 -

Download from Www.Somanuals.com. All Manuals Search And Download.

Projector WUX10 MarkII User Commands

Description

(1) This emulates pressing of the remote control buttons for controlling the projector.

(2) With the emulation of the remote control operations, the functions of the buttons

corresponding to the parameters cannot necessarily be executed.

Emulation simply consists in emulating the pressing of the buttons.

(3) Function for transfer to special mode (service mode) is unavailable.

(4) A parameter with '+REP' signifies "button press start". (This is the same as the status in

which the remote control button is held down.)

Be absolutely sure to send the '*-REP' parameter, and end the button pressing last of all.

The button pressing is ended in the cases below as well.

<1> When a panel or remote control button has been operated

<2> When a command has been received

Example

Setting

> RC POWER

< i:OK

* Commands are indicated by ">", and responses are indicated by "<".

Revision History / Date

Changes

Revised by

Approved by

- 60 -

Download from Www.Somanuals.com. All Manuals Search And Download.

Projector WUX10 MarkII User Commands

RCCH

Remote control channel setting

Format

RCCH=<Remote control setting parameters:ID>

GET□RCCH / ?△RCCH

Remote control channel 1

Remote control channel 2

Environment

Power

Input

OFF ON PM D-RGB A-RGB1 A-RGB2 COMP VIDEO HDMI

None

Response

"i:OK" is returned if the parameter was set properly.

For 'GET RCCH' or '?RCCH', current remote control channel setting is returned as

'g:RCCH=<Remote control setting parameters:ID>'

For details on other responses, refer to the "Error List".

Description

(1) This command is used to set the channel of the remote control used at the projector end to 1 or

(2) This command functions in the same way as when "System setting" - "Other settings" -

"Remote control setting" are selected on the menu.

(3) The current remote control setting can be acquired using the applicable GET command. ("GET

RCCH")

Example

Setting

> RCCH=1

This sets the remote control channel to ch1.

This retrieves the remote control setting state.

< i:OK

Reference

> GET RCCH or ?RCCH

< g:RCCH=2

* Commands are indicated by ">", and responses are indicated by "<".

Revision History / Date

Changes

Revised by

Approved by

- 61 -

Download from Www.Somanuals.com. All Manuals Search And Download.

Projector WUX10 MarkII User Commands

RESET

Reset

Format

RESET□<Reset parameters:ID>

LAMPTIME

IMAGE

Lamp on time reset

Current image adjustment reset

SYSTEM

ALL

Initial system settings(same as "Factory settings" in the menu)

Initialize all

Environment

Power

Input

OFF ON PM D-RGB A-RGB1 A-RGB2 COMP VIDEO HDMI

None

Response

"i:OK" is returned if the reset process is successful.

Furthermore, the internal status established when a response other than the normal response

("i:OK") has been returned is indeterminate.

For details on other responses, refer to the "Error List".

Description

(1) This resets the projector settings.

(2) What can be specified by the reset parameters for each "reset type" is provided below.

■ Reset of lamp on time

(a) The counter indicating the lamp replacement period is reset.

(b) This command functions in the same way as when "System setting" - "Lamp counter"

- "Reset" are selected on the menu.

■ Current image adjustment reset

(a) The adjustment settings of the currently-selected image mode are initialized.

(b) This command functions in the same way as when "Image adjustment" - "Image

adjustment reset" are selected on the menu.

* If there is an input signal, the image adjustment items are initialized and then the adjustment

values are optimized for the signal.

■ Reset of system settings

(a) The following items are initialized.

• Image adjustment items (all image modes)

• Initial settings executed

For details, refer to 'RESET items' at the end of these specifications.

(b) This command functions in the same way as when "System setting" - "Other settings"

- "Factory settings" are selected on the menu.

■ Initialize all

(a) The following items are initialized.

• Image adjustment items (all image modes)

• Initial settings executed

• Input source

• Language

* For details, refer to 'RESET items' at the end of these specifications.

Revision History / Date

Changes

Revised by

Approved by

- 62 -

Download from Www.Somanuals.com. All Manuals Search And Download.

Projector WUX10 MarkII User Commands

Notes

(a) The power must never be turned off while this command is being executed!

(b) After the 'Factory settings,' be absolutely sure to turn the power off and then restart.

'System initial setting' has been executed.

Example

Control

> RESET LAMPTIME

This resets the lamp on time.

< i:OK

* Commands are indicated by ">", and responses are indicated by "<".

Revision History / Date

Changes

Revised by

Approved by

- 63 -

Download from Www.Somanuals.com. All Manuals Search And Download.

Projector WUX10 MarkII User Commands

RGBGAIN

RGB gain adjustment

Format

RGBGAIN=<R gain setting:Number>▽<G gain setting:Number>▽<B gain setting:Number>

GET□RGBGAIN / ?△RGBGAIN

Setting values for <R/G/B gain setting:Number> are -60 to 60.

Environment

Power

Input

OFF ON PM D-RGB A-RGB1 A-RGB2 COMP VIDEO HDMI

None

Response

"i:OK" is returned if the parameter was set properly.

For 'GET RGBGAIN' or '?RGBGAIN', current RGB gain adjustment values are returned as

'g:RGBGAIN=<R gain setting:Number>,<G gain setting:Number>,<B gain setting:Number>'

For details on other responses, refer to the "Error List".

Description

(1) This command is used to adjust the gain of the R, G and B colors.

(2) This command functions in the same way as when "Image adjustment" - "Color adjustment" -

"Gain adjustment" are selected on the menu.

(3) If numerical parameters are outside the range, "e:0801 INVALID_VALUE" is returned.

(4) This sets the currently selected input signal and image mode.

(5) The current RGB gain values can be obtained using the GET command. ("GET RGBGAIN")

Example

Setting

> RGBGAIN=10, 11, 12

The R gain is set to 10, G gain to 11 and B gain to 12.

The RGB gain values are obtained.

< i:OK

Reference

> GET RGBGAIN or ?RGBGAIN

< g:RGBGAIN=-10, 0, 19

* Commands are indicated by ">", and responses are indicated by "<".

Revision History / Date

Changes

Revised by

Approved by

- 64 -

Download from Www.Somanuals.com. All Manuals Search And Download.

Projector WUX10 MarkII User Commands

RGBOFFSET

RGB offset adjustment

Format

RGBOFFSET=<R offset setting:Number>▽<G offset setting:Number>▽<B offset setting:Number>

GET□RGBOFFSET / ?△RGBOFFSET

Setting values for <R/G/B offset setting:Number> are -60 to 60.

Environment

Power

Input

OFF ON PM D-RGB A-RGB1 A-RGB2 COMP VIDEO HDMI

None

Response

"i:OK" is returned if the parameter was set properly.

For 'GET RGBOFFSET' or '?RGBOFFSET', current RGB offset adjustment values are returned as

g:RGBOFFSET=<R offset setting:Number>,<G offset setting:Number>,<B offset setting:Number>

For details on other responses, refer to the "Error List".

Description

(1) This command is used to adjust the offset of the R, G and B colors.

(2) This command functions in the same way as when "Image adjustment" - "Color adjustment" -

"Offset adjustment" are selected on the menu.

(3) If numerical parameters are outside the range, "e:0801 INVALID_VALUE" is returned.

(4) This sets the currently selected input signal and image mode.

(5) The current RGB offset values can be obtained using the GET command. ("GET RGBOFFSET")

Example

Setting

> RGBOFFSET=10, 11, 12

The R offset is set to 10, G offset to 11 and B offset to 12.

The RGB offset values are obtained.

< i:OK

Reference

> GET RGBOFFSET or ?RGBOFFSET

< g:RGBOFFSET=-10, 0, 19

* Commands are indicated by ">", and responses are indicated by "<".

Revision History / Date

Changes

Revised by

Approved by

- 65 -

Download from Www.Somanuals.com. All Manuals Search And Download.

Projector WUX10 MarkII User Commands

ROMVER

ROM version inquiry

Format

GET□ROMVER / ?△ROMVER

Environment

Power

Input

OFF ON PM D-RGB A-RGB1 A-RGB2 COMP VIDEO HDMI

None

Response

ROM version of the firmware is returned as

g:ROMVER="<ROM version:Character string>"

<ROM version>:=99.999999

For details on other responses, refer to the "Error List".

Description

(1) This inquires about the version of the firmware.

(2) This inquiry can be executed in any status provided that AC power is supplied to the projector.

Example

> GET ROMVER or ? ROMVER

< g:ROMVER="01.030602"

* Commands are indicated by ">", and responses are indicated by "<".

Revision History / Date

Changes

Revised by

Approved by

- 66 -

Download from Www.Somanuals.com. All Manuals Search And Download.

Projector WUX10 MarkII User Commands

SAT

Color saturation setting

Format

RGBGAIN=<R gain setting:Number>▽<G gain setting:Number>▽<B gain setting:Number>

GET□RGBGAIN / ?△RGBGAIN

Setting values for <Color saturation setting value:Number> are -20 to 20.

Environment

Power

Input

OFF ON PM D-RGB A-RGB1 A-RGB2 COMP VIDEO HDMI

None

Response

"i:OK" is returned if the parameter was set properly.

For 'GET SAT' or '?SAT', current saturation setting value is returned as

'g:SAT=<Color saturation setting value:Number>'

For details on other responses, refer to the "Error List".

Description

(1) This sets the screen color saturation.

(2) This command functions in the same way as when "Image adjustment" - "Color adjustment" -

"Color saturation setting" are selected on the menu.

(3) If the input is "HDMI", 'e:200X INVALID_SOURCE(***)' is returned as an error response.

(4) When image mode is not set to "PHOTO", 'e:2020 INVALID_IMAGE_MODE' is returned as an

error response even if the input is "D-RGB", "A-RGB1" or "A-RGB2".

(5) If numerical parameters are outside the range, "e:0801 INVALID_VALUE" is returned.

(6) This sets the currently selected input signal and image mode.

(7) The GET command can be used to retrieve the current color saturation. ("GET SAT")

Example

Setting

> SAT=-10

This sets the color saturation to –10.

This retrieves the color saturation.

< i:OK

Reference

> GET SAT or ?SAT

< g:SAT=1

* Commands are indicated by ">", and responses are indicated by "<".

Revision History / Date

Changes

Revised by

Approved by

- 67 -

Download from Www.Somanuals.com. All Manuals Search And Download.

Projector WUX10 MarkII User Commands

SCRNASPECT

Screen aspect setting

Format

SCRNASPECT=<Screen aspect setting parameter:ID>

GET□SCRNASPECT / ?△SCRNASPECT

4:3

4:3 display

16:9

16:9 display

4:3_DIS

16:9_DIS

16:10

4:3 digital image shift

16:9 digital image shift

16:10 display

Environment

Power

Input

OFF ON PM D-RGB A-RGB1 A-RGB2 COMP VIDEO HDMI

None

Response

"i:OK" is returned if the parameter was set properly.

For 'GET SCRNASPECT' or '?SCRNASPECT', current screen aspect setting is returned as

'g:SCRNASPECT=<Screen aspect setting parameter:ID>'

For details on other responses, refer to the "Error List".

Description

(1) This sets the screen aspect.

(2) This command functions in the same way as when "Display setting" - "Screen aspect" are

selected on the menu.

(3) The GET command can be used to retrieve the current screen aspect. ("GET SCRNASPECT")

(4) The final screen aspect settings are retained even when the power is turned off.

Example

Setting

> SCRNASPECT=16:9

This sets the screen aspect to 16:9.

This retrieves the screen aspect.

> i:OK

Reference

> GET SCRNASPECT or ?SCRNASPECT

< g:SCRNASPECT=4:3

* Commands are indicated by ">", and responses are indicated by "<".

Revision History / Date

Changes

Revised by

Approved by

- 68 -

Download from Www.Somanuals.com. All Manuals Search And Download.

Projector WUX10 MarkII User Commands

SEL

Input signal selection

Format

SEL=<Input signal selection parameter:ID>

GET□SEL / ?△SEL

AUTO

Auto

Environment

Power

Input

OFF ON PM D-RGB A-RGB1 A-RGB2 COMP VIDEO HDMI

None

Response

"i:OK" is returned if the parameter was set properly.

For 'GET SEL' or '?SEL', current input signal is returned as

'g:SEL=<Detected input signal:ID>'

(Refer to "Description".)

For details on other responses, refer to the "Error List".

Description

(1) This selects the input signal.

(2) This command functions in the same way as when "Display setting" - "Input signal selection" -

"AUTO" are selected on the menu.

(3) If the input is neither "COMP", "S-VIDEO" nor "VIDEO", 'e:200X INVALID_SOURCE(***)' is

returned as an error response.

(4) If signals are not input, 'e:2010 NO_SIGNAL' is returned.

(5) The current input signal can be acquired using the applicable GET command. ("GET SEL")

List of signals which can be detected (1)

Parameter

PAL

Remarks

Includes PAL-M and PAL-N

SECAM

NTSC

1080p

1080i

Includes NTSC4.43

Includes 540p (1080i non-interlaced signal)

1035i

List of signals which can be detected (2)

Parameter

720p

Remarks

576p

480p

576i

Includes 288p (PAL non-interlaced signal)

Includes 240p (NTSC non-interlaced signal)

480i

UNKNOWN No-color, 1080p, and other signals

Revision History / Date

Changes

Revised by

Approved by

- 69 -

Download from Www.Somanuals.com. All Manuals Search And Download.

Projector WUX10 MarkII User Commands

Example

Setting

> SEL=AUTO

This sets the input signal selection to “AUTO”.

< i:OK

Reference

> GET SEL or ?SEL

This retrieves the input signal.

< g:SEL=575p

* Commands are indicated by ">", and responses are indicated by "<".

Revision History / Date

Changes

Revised by

Approved by

- 70 -

Download from Www.Somanuals.com. All Manuals Search And Download.

Projector WUX10 MarkII User Commands

SHARP

Sharpness setting

Format

SHARP=<Sharpness setting:Number>

GET□SHARP / ?△SHARP

Setting values for <Sharpness setting:Number> are -10 to 10.

Environment

Power

Input

OFF ON PM D-RGB A-RGB1 A-RGB2 COMP VIDEO HDMI

None

Response

"i:OK" is returned if the parameter was set properly.

For 'GET SHARP' or '?SHARP', current sharpness setting is returned as

'g:SHARP=<Sharpness setting:Number>'

For details on other responses, refer to the "Error List".

Description

(1) This sets the screen sharpness.

(2) This command functions in the same way as when "Image adjustment" - "Sharpness setting"

are selected on the menu.

(3) If numerical parameters are outside the range, "e:0801 INVALID_VALUE" is returned.

(4) This sets the currently selected input signal and image mode.

(5) The current sharpness can be acquired using the applicable GET command. ("GET SHARP")

Example

Setting

> SHARP=3

This sets the sharpness to 3.

This retrieves the sharpness.

< i:OK

Reference

> GET SHARP or ?SHARP

< g:SHARP=3

* Commands are indicated by ">", and responses are indicated by "<".

Revision History / Date

Changes

Revised by

Approved by

- 71 -

Download from Www.Somanuals.com. All Manuals Search And Download.

Projector WUX10 MarkII User Commands

SIGNALSTATUS

Signal status inquiry

Format

GET□SIGNALSTATUS / ?△SIGNALSTATUS

Environment

Power

Input

OFF ON PM D-RGB A-RGB1 A-RGB2 COMP VIDEO HDMI

None

Response

Current image signal input status is returned as

'g:SIGNALSTATUS=<Signal status:ID>'

Signal status

NO_SIGNAL

DISPLAYING

SETTING

Meaning

Signal not detected

Image now displayed or display enable status

Signal detection and display preparation in progress

For details on other responses, refer to the "Error List".

Description

(1) This inquires about the current image signal input status.

(2) This returns the signal status of the selected input. Use INPUT command for the input

selection.

(3) "e:1006:NOW_BLANK" is returned during blanking.

Example

> GET SIGNALSTATUS or ? SIGNALSTATUS

< g:SIGNALSTATUS=NO_SIGNAL

* Commands are indicated by ">", and responses are indicated by "<".

Revision History / Date

Changes

Revised by

Approved by

- 72 -

Download from Www.Somanuals.com. All Manuals Search And Download.

Projector WUX10 MarkII User Commands

TEMP

Temperature inquiry

Format

GET□TEMP

<n>

Number

<v>

0 to 255

Temperature value 0.0 to 127.9 °C

Environment

Power

Input

OFF ON PM D-RGB A-RGB1 A-RGB2 COMP VIDEO HDMI

None

Response

Temperature is returned as 'g:TEMP=<n>{,<v>}'

For details on other responses, refer to the "Error List".

Description

(1) This inquires about the temperature sensor value.

(2) Number of temperature sensors varies according to model.

(3) When returning multiple temperature sensor values, values will be separated with a comma.

There are cases when a number of sensors is 0. In this case, there will not be a comma.

(4) For correspondence of temperature sensor sequence and actual installation location, inquire

separately.

Example

Setting

None

Reference

> GET TEMP

This retrieves the temperature sensor values.

< g:TEMP=5,37.1,63.0,38.9,29.7,32.4

* Commands are indicated by ">", and responses are indicated by "<".

Revision History / Date

Changes

Revised by

Approved by

- 73 -

Download from Www.Somanuals.com. All Manuals Search And Download.

Projector WUX10 MarkII User Commands

TMPL

Temperature limit inquiry

Format

GET□TMPL

<n>

Number

<v>

0 to 255

Temperature value 0.0 to 127.9 °C

Environment

Power

Input

OFF ON PM D-RGB A-RGB1 A-RGB2 COMP VIDEO HDMI

None

Response

Private commands (disclosed upon request)

Temperature limit is returned as 'g:TMPL=<n>{,<v>}'

For details on other responses, refer to the "Error List".

Description

(1) This returns the limit value (of machine-stoppage) of each temperature sensors.

(2) Number of temperature sensors varies according to model.

(3) When returning multiple temperature sensor values, values will be separated with a comma.

There are cases when a number of sensors is 0. In this case, there will not be a comma.

(4) For correspondence of temperature sensor sequence and actual installation location, inquire

separately.

Example

Setting

None

Reference

> GET TMPL

This retrieves the temperature sensor limit values.

< g:TMPL=5,71.0,90.0,57.0,44.0,53.0

* Commands are indicated by ">", and responses are indicated by "<".

Revision History / Date

Changes

Revised by

Approved by

- 74 -

Download from Www.Somanuals.com. All Manuals Search And Download.

Projector WUX10 MarkII User Commands

TRACK

Tracking adjustment

Format

TRACK=<Adjustment value:Number>

GET□TRACK / ?△TRACK

Environment

Power

Input

OFF ON PM D-RGB A-RGB1 A-RGB2 COMP VIDEO HDMI

None

Response

"i:OK" is returned if the parameter was set properly.

For 'GET TRACK' or '?TRACK', current tracking adjustment value is returned as

'g:TRACK=<Adjustment value:Number>'

For details on other responses, refer to the "Error List".

Description

(1) This is used for adjustment when tracking (synchronization) is out of sync and the screen

flickers.

(2) This command functions in the same way as when "Display setting" - "Input signal selection" -

"Tracking adjustment" are selected on the menu.

(3) If the input is neither "A-RGB1" nor "A-RGB2", 'e:200X INVALID_SOURCE(***)' is returned

as an error response.

(4) If signals are not input, 'e:2010 NO_SIGNAL' is returned.

(5) Adjustment range is limited. If number is invalid, "e:0801 INVALID_VALUE" is returned.

(6) The GET command can be used to retrieve the current tracking adjustment values. ("GET

TRACK")

Example

Setting

> TRACK=25

The tracking adjustment value is set to 25.

< i:OK

Reference

> GET TRACK or ?TRACK

This retrieves the tracking adjustment setting value.

< g:TRACK=21

* Commands are indicated by ">", and responses are indicated by "<".

Revision History / Date

Changes

Revised by

Approved by

- 75 -

Download from Www.Somanuals.com. All Manuals Search And Download.

Projector WUX10 MarkII User Commands

VKS

Vertical keystone setting

Format

VKS=<Vertical keystone distortion value:Number>

GET□VKS / ?△VKS

Environment

Power

Input

OFF ON PM D-RGB A-RGB1 A-RGB2 COMP VIDEO HDMI

None

Response

"i:OK" is returned if the parameter was set properly.

For 'GET VKS' or '?VKS', current vertical keystone setting value is returned as

'g:VKS=<Vertical keystone distortion value:Number>'

For details on other responses, refer to the "Error List".

Description

(1) This sets the vertical keystones.

(2) This command is identical to pressing the “KEYSTONE” button on the remote control.

(3) The settable keystone range varies depending on the input signal, screen size, number of

horizontal and vertical dots, and other factors.

If keystone values are outside the range, "e:0801 INVALID_VALUE" is returned.

(4) The GET command can be used to obtain the current vertical/horizontal keystone value. ("GET

VKS")

Example

Setting

> VKS=-23

This sets the vertical keystone to –23.

This retrieves the vertical keystone.

< i:OK

Reference

> GET VKS or ?VKS

< g:VKS=-23

* Commands are indicated by ">", and responses are indicated by "<".

Revision History / Date

Changes

Revised by

Approved by

- 76 -

Download from Www.Somanuals.com. All Manuals Search And Download.

Projector WUX10 MarkII User Commands

Screen color correction

Format

WB=<Screen color correction parameters:ID>

GET□WB / ?△WB

NORMAL

GREENBOARD

ADJUST

Standard

Blackboard

Adjust

Environment

Power

Input

OFF ON PM D-RGB A-RGB1 A-RGB2 COMP VIDEO HDMI

None

Response

"i:OK" is returned if the parameter was set properly.

For 'GET WB' or '?WB', current screen color correction is returned as

'g:WB=<Screen color correction parameters:ID>'

For details on other responses, refer to the "Error List".

Description

(1) The screen color correction is set to “Normal”, “Blackboard”, or “Adjust”.

(2) This command functions in the same way as when "Display setting" - "Screen color correction"

are selected on the menu.

(3) When "ADJUST" has been selected, adjust the RGB adjustment values using the WBRGB

command.

(4) The current screen color correction can be acquired using the applicable GET command. ("GET

WB")

Example

Setting

> WB=NORMAL

This sets the screen color correction to “Normal”.

This retrieves the screen color correction.

< i:OK

Reference

> GET WB or ?WB

< g:WB=GREENBOARD

* Commands are indicated by ">", and responses are indicated by "<".

Revision History / Date

Changes

Revised by

Approved by

- 77 -

Download from Www.Somanuals.com. All Manuals Search And Download.

Projector WUX10 MarkII User Commands

WBRGB

Screen color correction (ADJUST)

Format

WBRGB=<R adjustment value:Number>▽<G adjustment value:Number>▽<B adjustment value:Number>

GET□WBRGB / ?△WBRGB

Setting values for <R/G/B adjustment value:Number> are -20 to 20.

Environment

Power

Input

OFF ON PM D-RGB A-RGB1 A-RGB2 COMP VIDEO HDMI

None

Response

"i:OK" is returned if the parameter was set properly.

For 'GET WBRGB' or '? WBRGB', current screen color correction (adjustment) value are returned as

g:WBRGB=<R adjustment value:Number>,<G adjustment value:Number>,<B adjustment value:Number>'

For details on other responses, refer to the "Error List".

Description

(1) This sets the RGB adjustment values of the screen color correction.

(2) This command functions in the same way as when "Display setting" - "Screen color correction"

- "RGB adjustment" are selected on the menu.

(3) If numerical parameters are outside the range, "e:0801 INVALID_VALUE" is returned.

(4) Although this setting is enabled when Adjustment (ADJUST) is selected by the screen color

correction command (WB), it can be made independently.

(5) The GET command can be used to retrieve the current RGB adjustment values. ("GET WBRGB")

Example

Setting

> WBRGB=10, 11, 12

This sets R to 10, G to 11, and B to 12.

< i:OK

Reference

> GET WBRGB or ?WBRGB

This retrieves the RGB adjustment values.

< g:WBRGB=-10, 0, 19

* Commands are indicated by ">", and responses are indicated by "<".

Revision History / Date

Changes

Revised by

Approved by

- 78 -

Download from Www.Somanuals.com. All Manuals Search And Download.

Projector WUX10 MarkII User Commands

ZCONTDRV

Zoom lens continuous drive control

Format

ZCONTDRV=<Zoom lens continuous control parameter:ID>

STOP

WIDE

TELE

This stops the zooming.

This zooms to the wide-angle end.

This zooms to the telephoto end.

Environment

Power

Input

OFF ON PM D-RGB A-RGB1 A-RGB2 COMP VIDEO HDMI

None

Response

"i:OK" is returned when the drive was completed successfully.

For details on other responses, refer to the "Error List".

Description

(1) This command is used to drive the zoom lens continuously.

(2) This command functions in the same way as when first the "ZOOM" button on the remote

control or main unit panel is pressed and then the "↑" or "↓" button is pressed.

(3) Zoom drive is started by specifying "TELE" or "WIDE".

To stop the drive, send the "ZCONTDRV=STOP" command.

If no instruction was given to stop the drive, the drive stops at the drive direction end.

(4) The following commands are acknowledged during zoom drive, but zoom drive will also stop at

the same time.

a. POWER

b. ZCONTDRV=STOP

(5) The following commands are acknowledged during zoom drive, and a response is returned

while the drive continues.

GET MODE

GET POWER

GET ERR

e. GET PRODCODE

f. GET ROMVER

g. GET COMVER

h. REMOTE

i. LOCAL

j. RC

k. MAIN

l. [NULL]

GET LAMPCOUNTER

(6) There are no GET commands available for this command.

Example

Control

> ZCONTDRV=TELE

Control over the zooming to the telephoto end is started.

< I:OK

* Commands are indicated by ">", and responses are indicated by "<".

Revision History / Date

Changes

Revised by

Approved by

- 79 -

Download from Www.Somanuals.com. All Manuals Search And Download.

Projector WUX10 MarkII User Commands

ZSTEPDRV

Zoom lens step drive control

Format

ZSTEPDRV=<Zoom lens step control parameter:ID>

WIDE

TELE

This zooms to the wide-angle end.

This zooms to the telephoto end.

Environment

Power

Input

OFF ON PM D-RGB A-RGB1 A-RGB2 COMP VIDEO HDMI

None

Response

"i:OK" is returned when zooming was completed successfully after step drive.

For details on other responses, refer to the "Error List".

Description

(1) This command is used to drive the zoom lens.

(2) This command functions in the same way as when first the "ZOOM" button on the remote

control or main unit panel is pressed and then the "←" or "→" button is pressed.

(3) The amount by which the lens is zoomed is constant, and it is fixed in the system.

(4) If a zooming error occurs, step drive cannot be controlled.

(5) There are no GET commands available for this command.

Example

Control

> ZSTEPDRV=TELE

1-step control is exercised over the zoom toward the TELE end.

< I:OK

* Commands are indicated by ">", and responses are indicated by "<".

Revision History / Date

Changes

Revised by

Approved by

- 80 -

Download from Www.Somanuals.com. All Manuals Search And Download.

Projector WUX10 MarkII User Commands

7. Error List

Item Code TYPE

Error character strings

BAD_SEQUENCE

Error

Remedy

Wait until a response is received

before sending the next command.

0001

Communication sequence error

0002

0004

INVALID_COMMAND

INVALID_FORMAT

Invalid (undefined) command.

Invalid command format.

Send a valid command.

Send the command in the valid

format.

Turn on the power using the

POWER ON command.

0005

NOT_POWER_SUPPLIED The projector's power is off.

The projector is switching power Wait until the power mode is ON,

BUSY (POWER)

modes.

OFF or PMM.

The parameter (type) is invalid

(undefined). Includes cases when

the number of parameters is

incorrect.

000A

000B

INVALID_PARAMETER

Use the correct parameters.

Internal processing in the projector

has timed out.

JOB_TIMEOUT

BUSY (FOCUS)

BUSY (ZOOM)

Resend the command.

Wait until the projector has finished

driving the focus lens.

The focus lens is being driven.

The zoom lens is being driven.

Wait until the projector has finished

driving the zoom lens.

User image registration is in

progress.

Wait until user image registration is

complete.

BUSY (LOGO_CAPTURE)

BUSY (IMAGE)

Image mode switching is in

progress.

Wait until the projector has switched

the image mode.

Signal setting (detection) in

progress.

Wait until the processing is

completed.

BUSY (NOW_SETTING)

BUSY

Internal processing in the projector Wait until the current processing is

is in progress. complete.

Cannot execute command since Resend the command after

blanking operation is in progress. canceling the blanking operation.

1006

1009

100A

100B

NOW_BLANK

Cannot execute command since Resend the command after

NOW_FREEZE

freeze operation is in progress.

canceling the freeze operation.

Cannot execute command since Resend the command after

NOW_D.ZOOM

D. zooming is in progress.

canceling D. zooming.

Cannot execute command in

current menu mode.

Resend the command after exiting

the current menu mode.

NOW_SPECIAL_MENU

Revision History / Date

Changes

Revised by

Approved by

- 81 -

Download from Www.Somanuals.com. All Manuals Search And Download.

Projector WUX10 MarkII User Commands

Item Code TYPE

Error character strings

Error

Remedy

F001

F002

SYSTEM (UNKNOWN)

An internal error has occurred.

Resend the command.

An error occurred at

AUTOSETEXE=FOCUS.

SYSTEM (AF)

An error occurred at

AUTOSETEXE=VKS.

Eliminate the cause of the error, and

resend the command.

F004

F005

SYSTEM (AK)

An error occurred at

AUTOSETEXE=SCRN.

SYSTEM (ASC)

A communication protocol violation

has occurred in the projector.

12 E0XX

1008

COMMUNICATION_ERROR

Resend the command.

Cannot execute command under Change the screen aspect ratio

INVALID_SCREEN_ASPECT current screen aspect ratio setting. setting.

Cannot execute command with

current input source.

14 200X

2010

INVALID_SOURCE (****)

Change the input source.

Current input source is indicated in

parentheses.

NO_SIGNAL

No input signal.

Supply the input signal.

Change the input signal.

Cannot execute command with

current input signal.

201X

INVALID_SIGNAL (****)

Current input signal is indicated in

parentheses.

Cannot execute command with

current image mode.

16 2020

INVALID_IMAGE_MODE

Change the image mode.

Numerical parameters are invalid Set the parameters in the correct

17 0801

1003

INVALID_VALUE

or outside the specified range.

range.

IP_NOT_AVAILABLE

IP conversion is not possible.

Switch to the correct input signal.

DPON=ON cannot be set when

PMM=OFF.

1004

Use a setting other than PMM=OFF.

Use the DPON=OFF setting.

POWER_MANAGEMENT_O

PMM=OFF cannot be set when

DPON=ON.

1005

203X

DIRECT_POWER_ON

Invalid input signal resolution.

Additional information is indicated

in parentheses.

INVALID_RESOLUTION

(***)

Switch to an input signal with the

correct resolution.

■OVER_PANEL_RES: input

signal resolution exceeds panel

resolution.

Input was not switched since there

is no input signal at

AUTOSETEXE=INPUT.

Notification of status only; no

particular measures needed.

INPUT_NOT_FOUND

* Error codes are 4-digit hexadecimal strings. X represents any character from 0 to 9 or from A to F.

* Items with lower numbers have a higher priority. (Even when multiple errors have occurred, the error with the highest rank is returned.

However, errors of the same item number are ranked with the same priority.)

Revision History / Date

Changes

Revised by

Approved by

- 82 -

Download from Www.Somanuals.com. All Manuals Search And Download.

Projector WUX10 MarkII User Commands

8. Error Processing

START

Error judgment

YES

"BAD_SEQUENCE"

Processing user command?

Invalid (undefined)

command?

"INVALID_COMMAND"

"INVALID_FORMAT"

Invalid command format?

YES

Command executable while

power mode is OFF?

YES

"NOT_POWER_SUPPLIED"

Power mode is "OFF"?

YES

Command executable with

PMM?

YES

Power mode is

"PMM"？

"NOT_POWER_SUPPLIED"

YES

"BUSY (POWER)"

Switching power modes?

YES

"INVALID_PARAMETER"

Invalid parameter type?

Undefined parameter ID?

YES

Incorrect parameter

number?

YES

"BUSY (FOCUS)"

"BUSY (ZOOM)"

Focus lens driving?

Zoom lens driving?

YES

User image registration in

progress?

"BUSY (LOGO_CAPTURE)"

"BUSY (IMAGE)"

Image mode switching in

progress?

Signal setting (detection) in

progress?

"BUSY (NOW_SETTING)"

YES

Internal processing in

progress?

"BUSY"

Revision History / Date

Changes

Revised by

Approved by

- 83 -

Download from Www.Somanuals.com. All Manuals Search And Download.

Projector WUX10 MarkII User Commands

YES

Limitations in input source?

YES

"INVALID_SOURCE (**)"

Incorrect input source?

Requires input signal?

YES

"NO_SIGNAL"

No input signal?

YES

"INVALID_SIGNAL (**)"

Invalid input signal?

YES

Numerical parameter

outside the specified range?

"INVALID_VALUE"

User command is executable

FINISHED

Revision History / Date

Changes

Revised by

Approved by

- 84 -

Download from Www.Somanuals.com. All Manuals Search And Download.

Projector WUX10 MarkII User Commands

9. Other

Use the remote control emulation function (RC command) for the following functions.

Function

PC command parameter

DZOOM_P, DZOOM_M

P_TIMER

Digital zoom

Presentation timer

Revision History / Date

Changes

Revised by

Approved by

- 85 -

Download from Www.Somanuals.com. All Manuals Search And Download.

Projector WUX10 MarkII User Commands

Appendix 1. Reset Items

What is initialized by the "RESET" command is set forth in the table below.

ALL SYSTEM IMAGE

Item

Input source switching

Screen aspect

Setting

Reference command

●

A-RGB1

4:3

INPUT

●

SCRNASPECT

Video: 4:3

Other: AUTO

Aspect

ASPECT

●

HDMI overscan

------------

SEL

HDMI input level

Input signal select

Progressive

AUTO

PROG

Menu display position

Screen color correction

Center

NORMAL

------------

〃adjustment values (R,G,B) 0, 0, 0

WBRGB

IMAGEFLIP

NOSIG

Flip display

NONE

BLUE

No signal screen

Screen when BLANK

Startup screen

BLACK

CANON

BLANKCOLOR

PJON

DICOM model: DCM_SIM

●

Image mode

IMAGE

Other: STANDARD

●

Brightness

BRI

Contrast

CONT

Sharpness

SHARP

GAMMA

SAT

Gamma

Saturation

Hue

HUE

Color temperature

RGB gain adjustment

RGB offset adjustment

------------

RGBGAIN

RGBOFFSET

0, 0, 0

Video: WEAK

Other: OFF

IMAGE is PHOTO: MEDIUM

Other: OFF

OFF

●

Dynamic gamma

DGAMMA

Flesh tone adjustment

FTONEADJ

●

6-axis adjustment ON/OFF

6AXADJ

6AXR～Y

------------

LAMP

6-axis adjustment (SAT, HUE) 0, 0

Ambient light type

Ambient light level

Lamp mode

Fluorescent lamp

Medium

NORMAL

Auto focus: ON

Auto keystone: ON

Auto input: ON

●

Auto setup

------------

Automatic screen color correction: OFF

Revision History / Date

Changes

Revised by

Approved by

- 86 -

Download from Www.Somanuals.com. All Manuals Search And Download.

Projector WUX10 MarkII User Commands

ALL SYSTEM IMAGE

Item

Power management

Direct power-on

BEEP sound

Setting

Reference command

●

OFF

PMM

DPON

BVOL

●

Keylock

OFF

ENG

KEYLOCK

LANG

Language

●

Guide

GUIDE

LED illumination

Remote control

Menu display time

Password setting

Password character

Network function

Volume

LEDILLUMINATION

RCCH

●

Normal

OFF

None

OFF

------------

AVOL

●

Vertical keystone

Digital image shift

Presentation timer

Mute

VKS

------------

MUTE

OFF

Lamp ready indicator off flag OFF

------------

Revision History / Date

Changes

Revised by

Approved by

- 87 -

Download from Www.Somanuals.com. All Manuals Search And Download.

Black Decker Toaster ET202 User Manual
Black Decker Work Light VEC157BD User Manual
Blaupunkt Car Stereo System DJ User Manual
Bosch Appliances Blender MCM 5000m User Manual
Bosch Appliances Oven HBC34D553 User Manual
Bosch Appliances Smoke Alarm EVAX25E User Manual
Brother Network Card NC9100H User Manual
Cadco Food Warmer WT 10S User Manual
Capcom Video Games CA105_SFIV_XBX_MANC_BC02indd User Manual
Century Welding System IM998 User Manual