Installing Your Printer
to Your Network for the First Time
SELPHY CP910
Macintosh OS
Download from Www.Somanuals.com. All Manuals Search And Download.
1
Preparing to Connect My Printer
To My Network
Network Requirements
Before connecting the printer to the network, make sure that the configuration of the computer and access point (or router) is
complete, and that the computer is connected to the network.
Supported Wi-Fi Standards
Standards
IEEE 802.11b/g
Supported Channels
Transmission Methods
Security
1 – 11
DSSS (IEEE 802.11b) and OFDM (IEEE 802.11g)
No security, 64- and 128-bit WEP (open system authentication),
WPA-PSK (TKIP), WPA-PSK (AES), WPA2-PSK (TKIP), and
WPA2-PSK (AES)
Download from Www.Somanuals.com. All Manuals Search And Download.
3
Preparing to Connect My Printer
To My Network
An "Ad-hoc connection," which establishes a direct
connection to the computer over a wireless connection
without using an access point, is not supported.
Notes on Network Connection
• The configuration, router functions, setup procedures and security settings of
the network device vary depending on your system environment. For details,
refer to your device's instruction manual or contact its manufacturer.
• In an office setup, consult your network administrator
• If you connect to a network that is not protected with security measures, there
is a risk of disclosing data such as your personal information to a third party.
• Place the machine and computer on the same network segment.
Download from Www.Somanuals.com. All Manuals Search And Download.
4
Connecting to the Network
- Connecting to the wireless network router
Connecting the SELPHY CP910 to Your Access Point (Router)
Connecting the printer to your wireless network is done directly from the printer.
There are two methods to connect the printer to your router depending on the capabilities of your router.
•
•
If you do not know if your router is WPS-Compatible, then you should follow the instructions for the “Non-WPS Access Point”.
Download from Www.Somanuals.com. All Manuals Search And Download.
5
Connecting to the Network
- Connecting to the wireless network router
WPS-Compatible Access Point Setup
1. The printer should already be in a ready state with the paper cassette and ink cassette loaded.
Additionally, there should be no memory cards or USB flash drives connected to the printer.
2. Press the Menu button.
3. Press the Up or Down arrows to select [Wi-Fi Settings]. Press the OK button.
4. Press the Up or Down arrows to select [Connection Settings]. Press the OK button. Press the OK button.
5. Note the printer name. Press the OK button.
6. Press the Up or Down arrows to select [Via Wi-Fi Network]. Press the OK button.
img 5
img 4
img 6
Download from Www.Somanuals.com. All Manuals Search And Download.
6
Connecting to the Network
- Connecting to the wireless network router
WPS-Compatible Access Point Setup (continued)
7. Press the Up or Down arrows to select [WPS Connection]. Press the OK button.
8. Press the Up or Down arrows to select [PBC Method]. Press the OK button.
9. The screen in (img 9) is dispalyed.
10. On your router, press and hold the WPS button for a few seconds and then release it.
11. On the printer, press the OK button.
12. [Connecting] is displayed on the printer. When a connection is made, [Connected to access point] is
displayed. Press the OK button.
img 8
img 7
img 9
Download from Www.Somanuals.com. All Manuals Search And Download.
7
Connecting to the Network
- Connecting to the wireless network router
WPS-Compatible Access Point Setup (complete)
When the printer is connected to a router, the main display screen will show the access point (router) name
at the top left along with the signal strength.
Download from Www.Somanuals.com. All Manuals Search And Download.
8
Connecting to the Network
- Connecting to the wireless network router
Non-WPS Access Point Setup
1. The printer should already be in a ready state with the paper cassette and ink cassette loaded.
Additionally, there should be no memory cards or USB flash drives connected to the printer.
2. Press the Menu button.
3. Press the Up or Down arrows to select [Wi-Fi Settings]. Press the OK button.
4. Press the Up or Down arrows to select [Connection Settings]. Press the OK button. Press the OK button.
5. Note the printer name. Press the OK button.
6. Press the Up or Down arrows to select [Via Wi-Fi Network]. Press the OK button.
img 5
img 4
img 6
Download from Www.Somanuals.com. All Manuals Search And Download.
9
Connecting to the Network
- Connecting to the wireless network router
Non-WPS Access Point Setup (continued)
7. Press the Up or Down arrows to select [Search for an access point]. Press the OK button.
8. Press the Up or Down arrows to select your access point (router) name. Press the OK button.
9. Press the EDIT button and then enter the password for your router.
10. Press the Up or Down arrows to select [Connection Settings]. Press the OK button. Press the OK button.
11. Note the printer name. Press the OK button.
12. Press the Up or Down arrows to select [Via Wi-Fi Network]. Press the OK button.
img 8
img 7
img 9
Download from Www.Somanuals.com. All Manuals Search And Download.
10
Connecting to the Network
- Connecting to the wireless network router
Non-WPS Access Point Setup (complete)
[Connecting] is displayed on the printer. When a connection is made, [Connected to access point] is displayed. Press the OK button.
When the printer is connected to a router, the main display screen will show the access point (router) name at the top left along with the
signal strength.
Download from Www.Somanuals.com. All Manuals Search And Download.
11
Installing the Drivers
Installing the Printer Driver (Macintosh)
1. Insert the CD-ROM into the computer’s CD drive.
Note: If you don’t have your product CD-ROM, you can download the driver from the
skip to step 5.
img 12-11
2. Double-click the disc icon on the desktop or in the sidebar.
3. Double-click on the [Driver] folder.
4. Double-click the package file.
5. Follow the on-screen instructions to install the printer.
6. When the Connection Method screen (img 12-6) is displayed, select [Use with a wireless
network] and click [Next].
7. Choose your printer. Click [Next]. The printer driver is now installed.
8. Next, access [System Preferences] and the [Print & Scan].
9. Click [+] below the list.
10. If a pop-up menu is displayed, click [Add Printer or Scanner] or [Add Other Printer or
Scanner].
11. Select the printer named “Canon CP910” (type: “cnybmscp”) and click [Add].
Download from Www.Somanuals.com. All Manuals Search And Download.
12
Installing the Drivers
Installation Complete
The printer driver installation and setup is now complete.
Download from Www.Somanuals.com. All Manuals Search And Download.
13
|