E
INSTRUCTION
MANUAL
E
Download from Www.Somanuals.com. All Manuals Search And Download.
Thank you for purchasing a Canon product.
The EOS 5D is a high-performance, digital AF SLR camera with a large,
35.8 x 23.9mm CMOS sensor with 12.8 effective megapixels. The
camera has nine high-precision AF points, and it is compatible with all
Canon EF lenses (except EF-S lenses). Designed for quick shooting at
all times, the camera has many features for all types of shooting from
fully automatic snapshooting to creative work.
Before using the camera, try it out while reading this Instruction Manual
to familiarize yourself with camera operations.
To prevent accidents and damage, read the Safety Warnings (p.8,9)
and Handling Precautions (p.10,11).
Test the Camera Before Using
Before using the camera, take a few test shots and check that the images are
properly recorded on the memory card.
If the camera or memory card is faulty and the images cannot be recorded or read
by a personal computer, Canon cannot be held liable for any loss or
inconvenience caused.
Copyrights
Copyright laws in your country may prohibit the use of your recorded images of
people and certain subjects for anything but private enjoyment. Also be aware that
certain public performances, exhibitions, etc., may prohibit photography even for
private enjoyment.
Canon and EOS are trademarks of Canon Inc.
Adobe and Photoshop are trademarks of Adobe Systems Incorporated.
CompactFlash is a trademark of SanDisk Corporation.
Windows is a trademark or registered trademark of Microsoft Corporation in the
United States and other countries.
Macintosh is a registered trademark of Apple Corporation in the United States
and other countries.
All other corporate names and trademarks mentioned in this manual are the
property of their respective owners.
*
This digital camera supports Design rule for Camera File System 2.0 and Exif
2.21 (also called “Exif Print”). Exif Print is a standard that enhances
compatibility between digital cameras and printers. By connecting to an Exif
Print-compliant printer, the shooting information is incorporated to optimize the
print output.
Download from Www.Somanuals.com. All Manuals Search And Download.
2
Item Check List
Check that all the following items have been included with your camera.
If anything is missing, contact your dealer.
‰ EOS 5D / Camera body (with Eyecup, body cap and lithium backup battery for the
date and time)
‰ Battery Pack BP-511A (with protective cover)
‰ Battery Charger CG-580/CB-5L * CG-580 or CB-5L is included.
‰ Power code for battery charger * For CB-5L.
‰ Interface Cable IFC-400PCU
‰ Video Cable VC-100
‰ Wide Strap EW-100DGR (with eyepiece cover)
‰ EOS DIGITAL Solution Disk (CD-ROM)
‰ Software Instruction Manual (CD-ROM, PDF)
‰ Pocket Guide
Quick start guide to shooting.
‰ EOS 5D INSTRUCTION MANUAL (this booklet)
‰ Software Guide
Gives an overview of the bundled software and explains the software
installation procedure.
‰ Warranty card of camera
* Be careful not to lose any of the above items.
* No CF card (for recording images) is included. Please purchase it separately.
CF cards made by Canon are recommended.
Download from Www.Somanuals.com. All Manuals Search And Download.
3
Contents
Introduction
Item Check List.................................................................................................. 3
Contents at a Glance......................................................................................... 6
Handling Precautions ...................................................................................... 10
Quick Start Guide ............................................................................................ 12
Nomenclature.................................................................................................. 14
Conventions Used in this Manual.................................................................... 20
Getting Started
21
1
Recharging the Battery.................................................................................... 22
Installing and Removing the Battery................................................................ 24
Using a Household Power Outlet .................................................................... 26
Mounting and Detaching a Lens...................................................................... 27
Installing and Removing the CF Card.............................................................. 28
Basic Operation............................................................................................... 30
Menu Operations............................................................................................. 33
Setting the Language ...................................................................................... 38
Set the power-off time/Auto power off ............................................................. 39
Setting the Date and Time............................................................................... 40
Replacing the Date/Time Battery..................................................................... 41
Cleaning the CMOS sensor............................................................................. 42
Dioptric Adjustment ......................................................................................... 44
Holding the Camera......................................................................................... 44
Fully Automatic Shooting
Using Full Auto................................................................................................ 46
Self-timer Operation ........................................................................................ 48
45
2
3
Image Settings
49
Setting the Image-recording Quality................................................................ 50
Selecting a Picture Style.................................................................................. 53
Customizing the Picture Style.......................................................................... 55
Registering the Picture Style........................................................................... 58
Setting the ISO Speed..................................................................................... 60
Setting the White Balance............................................................................... 61
Custom White Balance.................................................................................... 62
Setting the Color Temperature ........................................................................ 63
White Balance Correction................................................................................ 64
White Balance Auto Bracketing....................................................................... 65
Setting the Color Space .................................................................................. 67
Creating and Selecting a Folder...................................................................... 68
File Numbering Methods ................................................................................. 70
Checking Camera Settings.............................................................................. 72
Setting the AF, Metering, and Drive Modes
Selecting the AF Mode .................................................................................... 74
73
4
Download from Www.Somanuals.com. All Manuals Search And Download.
4
Contents
Selecting the AF Point......................................................................................77
Focusing an Off-Center Subject.......................................................................79
When Autofocus Fails (Manual Focusing) .......................................................80
Selecting the Metering Mode ...........................................................................81
Selecting the Drive Mode.................................................................................82
1
Advanced Operations
83
5
Program AE......................................................................................................84
Shutter-Priority AE ...........................................................................................86
Aperture-Priority AE .........................................................................................88
Depth of Field Preview.....................................................................................89
Manual Exposure .............................................................................................90
Setting Exposure Compensation......................................................................92
Auto Exposure Bracketing (AEB).....................................................................93
AE Lock............................................................................................................95
Bulb Exposures................................................................................................96
Mirror Lockup ...................................................................................................97
LCD Panel Illumination.....................................................................................98
Using the Eyepiece Cover ...............................................................................98
You can also silence the beeper......................................................................99
CF Card Reminder ..........................................................................................99
Flash Photography.........................................................................................100
Using Non-Canon Flash Units........................................................................102
2
3
4
5
6
7
8
9
10
Image Playback
103
6
7
Setting the Image Review Time .....................................................................104
Auto Image Rotation ......................................................................................105
Setting the LCD Brightness............................................................................106
Image Playback..............................................................................................107
Single image display, Index Display, Magnified View........................ 107 - 111
Auto playback, Rotating an Image..................................................... 112 - 113
Jump Display..................................................................................................114
Viewing the Images on a TV ..........................................................................116
Protecting Images ..........................................................................................117
Erasing Images ..............................................................................................118
Formatting the CF Card .................................................................................120
Direct Printing from the Camera
Preparing to Print ...........................................................................................123
PictBridge / CP Direct / Bubble Jet Direct............................................ 126 - 135
Easy Printing..................................................................................................138
121
DPOF: Digital Print Order Format
Customizing the Camera
Reference
139
147
159
8
9
10
Download from Www.Somanuals.com. All Manuals Search And Download.
5
Contents at a Glance
Image Quality
Set picture effects
Î p.53 (Selecting a Picture Style)
Set custom picture effects
Î p.55
(Customizing the Picture Style)
Print the image to a large size Î p.50 (73, 83, 1)
Take many photos
Î p.50 (76, 86)
Adjust the color tone
Î p.64 (WB correction)
Take black-and-white or sepia photos Î p.53 (Monochrome)
Focusing
Change the AF point
Î p.77 (S Selecting the AF point)
Î p.154 (C.Fn-13-1/2)
Select the AF point quickly
Photograph a still subject
Î p.75 (One-Shot AF)
Photograph a moving subject Î p.75 (AI Servo AF)
Drive
Take continuous shots
Take a picture of myself
Î p.82 (iContinuous shooting)
Î p.48 (jSelf-timer)
Shooting
Shoot fully automatically
Î p.46 (Using Full Auto)
Download from Www.Somanuals.com. All Manuals Search And Download.
6
Contents at a Glance
Freeze or blur the action
Î p.86 (sShutter-priority AE)
Blur or the background or make everything look sharp
Î p.88 (fAperture-priority AE)
Adjust the image brightness (exposure)
Î p.92 (Exposure compensation)
Photograph fireworks
Î p.96 (Bulb exposures)
Photograph dark scenes
Î p.100 (Flash photography)
Image Playback and Printing
View images with the camera
Î p.107 (x Playback)
Î p.118 (L Erase)
Erase an image
Prevent accidental erasure of an image Î p.117 (K Protect)
View images on TV
Î p.116 (Video OUT)
Î p.121 (Direct printing)
Î p.106 (LCD brightness
Print images easily
Adjust the LCD monitor brightness
)
Power Source
Use a household power outlet
Î p.26 (AC adapter kit)
Î p.39 (Auto power off)
Change the auto power off time
Download from Www.Somanuals.com. All Manuals Search And Download.
7
Safety Warnings
Follow these safeguards and use the equipment properly to prevent injury, death,
and material damage.
Preventing Serious Injury or Death
• To prevent fire, excessive heat, chemical leakage, and explosions, follow the
safeguards below:
- Do not use any batteries, power sources, and accessories not specified in this
booklet. Do not use any home-made or modified batteries.
- Do not short-circuit, disassemble, or modify the battery pack or back-up battery. Do
not apply heat or apply solder to the battery pack or back-up battery. Do not expose
the battery pack or back-up battery to fire or water. And do not subject the battery
pack or back-up battery to strong physical shock.
- Do not install the battery pack or back-up battery in reversed polarity (+ –). Do not
mix new and old or different types of batteries.
- Do not recharge the battery pack outside the allowable ambient temperature range
of 0°C - 40°C (32°F - 104°F). Also, do not exceed the recharging time.
- Do not insert any foreign metallic objects into the electrical contacts of the camera,
accessories, connecting cables, etc.
• Keep the back-up battery away from children. If a child swallows the battery, consult a
physician immediately. (Battery chemicals may harm the stomach and intestines.)
• When disposing of a battery pack or back-up battery, insulate the electrical contacts
with tape to prevent contact with other metallic objects or batteries. This is to prevent
fire or an explosion.
• If excessive heat, smoke, or fumes are emitted during battery pack recharging,
immediately unplug the battery charger from the power outlet to stop the recharging
and prevent a fire.
• If the battery pack or back-up battery leaks, changes color, deforms, or emits smoke or
fumes, remove it immediately. Be careful not to get burned in the process.
• Prevent any battery leakage from contacting your eyes, skin, and clothing. It can
cause blindness or skin problems. If the battery leakage contacts your eyes, skin, or
clothing, flush the affected area with lots of clean water without rubbing it. See a
physician immediately.
• During the recharging, keep the equipment away from the reach of children. The cord
can accidentally choke the child or give an electrical shock.
• Do not leave any cords near a heat source. It can deform the cord or melt the
insulation and cause a fire or electrical shock.
• Do not fire the flash at someone driving a car. It may cause an accident.
• Do not fire the flash near a person’s eyes. It may impair the person’s vision. When
using flash to photograph an infant, keep at least 1 meter away.
• Before storing the camera or accessory when not in use, remove the battery pack and
disconnect the power plug. This is to prevent electrical shock, heat generation, and
fire.
• Do not use the equipment where there is flammable gas. This is to prevent an
explosion or fire.
Download from Www.Somanuals.com. All Manuals Search And Download.
8
• If you drop the equipment and the casing breaks open to expose the internal parts, do
not touch the internal parts due to the possibility of electrical shock.
• Do not disassemble or modify the equipment. High-voltage internal parts can cause
electrical shock.
• Do not look at the sun or an extremely bright light source through the camera or lens.
Doing so may damage your vision.
• Keep the camera from the reach of small children. The neck strap can accidentally
choke the child.
• Do not store the equipment in dusty or humid places. This is to prevent fire and
electrical shock.
• Before using the camera inside an airplane or hospital, check if it is allowed.
Electromagnetic waves emitted by the camera may interfere with the plane’s
instruments or the hospital’s medical equipment.
• To prevent fire and electrical shock, follow the safeguards below:
- Always insert the power plug all the way in.
- Do not handle a power plug with wet hands.
- When unplugging a power plug, grasp and pull the plug instead of the cord.
- Do not scratch, cut, or excessively bend the cord or put a heavy object on the cord.
Also do not twist or tie the cords.
- Do not connect too many power plugs to the same power outlet.
- Do not use a cord whose insulation has been damaged.
• Occasionally unplug the power plug and use a dry cloth to clean off the dust around
the power outlet. If the surrounding is dusty, humid, or oily, the dust on the power outlet
may become moist and short-circuit the outlet to cause a fire.
Preventing Injury or Equipment Damage
• Do not leave equipment inside a car under the hot sun or near a heat source. The
equipment may become hot and cause skin burns.
• Do not carry the camera around while it is attached to a tripod. Doing so may cause
injury. Also make sure the tripod is sturdy enough to support the camera and lens.
• Do not leave a lens or lens-attached camera under the sun without the lens cap
attached. Otherwise, the lens may concentrate the sun’s rays and cause a fire.
• Do not cover or wrap the battery-recharging apparatus with a cloth. Doing so may trap
heat within and cause the casing to deform or catch fire.
• If you drop the camera in water or if water or metal fragments enter inside the camera,
promptly remove the battery pack and back-up battery. This is to prevent fire and
electrical shock.
• Do not use or leave the battery pack or back-up battery in a hot environment. Doing so
may cause battery leakage or a shorter battery life. The battery pack or back-up
battery can also become hot and cause skin burns.
• Do not use paint thinner, benzene, or other organic solvents to clean the equipment.
Doing so may cause fire or a health hazard.
If the product does not work properly or requires repair, contact
your dealer or your nearest Canon Service Center.
Download from Www.Somanuals.com. All Manuals Search And Download.
9
Handling Precautions
Camera Care
This camera is a precision instrument. Do not drop it or subject it to physical
shock.
The camera is not waterproof and cannot be used underwater. If you
accidentally drop the camera into water, promptly consult your nearest
Canon Service Center. Wipe off any water droplets with a dry cloth. If the
camera has been exposed to salty air, wipe with a well-wrung wet cloth.
Never leave the camera near anything having a strong magnetic field such
as a magnet or electric motor. Also avoid using or leaving the camera near
anything emitting strong radio waves such as a large antenna. Strong
magnetic fields can cause camera misoperation or destroy image data.
Do not leave the camera in excessive heat such as in a car in direct sunlight.
High temperatures can cause the camera to malfunction.
The camera contains precision electronic circuitry. Never attempt to
disassemble the camera yourself.
Use a blower to blow away dust on the lens, viewfinder, mirror, and focusing
screen. Do not use cleaners that contain organic solvents to clean the
camera body or lens. For stubborn dirt, take the camera to a Canon Service
Center.
Do not touch the camera’s electrical contacts with your fingers. This is to
prevent the contacts from corroding. Corroded contacts can cause camera
misoperation.
If the camera is suddenly brought in from the cold into a warm room,
condensation may form on the camera and internal parts. To prevent
condensation, first put the camera in a sealed plastic bag and let it adjust to
the warmer temperature before taking it out of the bag.
If condensation forms on the camera, do not use the camera. This is to avoid
damaging the camera. If this occurs, remove the lens, CF card and battery
from the camera, and wait until the condensation has evaporated before
using the camera.
If the camera will not be used for an extended period, remove the battery
and store the camera in a cool, dry, well-ventilated location. Even while the
camera is in storage, press the shutter button a few times once in a while to
check that the camera is still working.
Avoid storing the camera where there are corrosive chemicals such as a
darkroom or chemical lab.
If the camera has not been used for an extended period, test all its functions
before using the camera. If you have not used the camera for some time or if
there is an important shoot coming up, have the camera checked by your
Canon dealer or check the camera yourself and make sure it is working
properly.
Download from Www.Somanuals.com. All Manuals Search And Download.
10
Handling Precautions
LCD Panel and LCD Monitor
Although the LCD monitor is manufactured with very high precision
technology with over 99.99% active pixels, there might be a few dead pixels
among the remaining 0.01% or less pixels. Dead pixels displaying only black
or red, etc., are not a malfunction. They do not affect the images recorded.
At low temperatures, the liquid-crystal display response may become slower.
And at high temperatures, the display may blacken. In either case, the
display will return to normal at room temperature.
CF Card
The CF card is a precision device. Do not drop the memory card or subject it
to vibration. Doing so could damage the images recorded on them.
Do not store or use a memory card near anything having a strong magnetic
field such as a TV set, speakers, or magnet. Also avoid places prone to
having static electricity. Otherwise, the images recorded on the CF card
might be lost.
Do not leave memory cards in direct sunlight or near a heat source. Doing so
can warp the cards and make them unusable.
Do not spill any liquid onto the CF card.
Always store your CF cards in a case to protect the data stored on them.
Non-Canon CF cards may not be able to record and playback images. Using
Canon CF cards is recommended.
Do not bend the card or subject it to any excessive force or physical shock.
Do not store CF cards in hot, dusty, or humid locations.
Contacts
Lens Electrical Contacts
After detaching the lens from the camera, attach the lens
caps or put down the lens with the rear end up to avoid
scratching the lens surface and electrical contacts.
Download from Www.Somanuals.com. All Manuals Search And Download.
11
Quick Start Guide
Insert the battery. (p.24)
To recharge the battery, see page 22.
1
Attach the lens. (p.27)
Align the red dot.
2
3
4
5
Set the lens focus mode switch
to <AF>. (p.27)
Open the cover and insert
a CF card. (p.28)
Face the label side toward you
and insert the end with the
small holes into the camera.
Set the power switch to <1>.
(p.30)
Download from Www.Somanuals.com. All Manuals Search And Download.
12
Quick Start Guide
Set the Mode Dial to <1> (Full
Auto). (p.46)
All the necessary camera settings will
be set automatically.
6
7
Focus the subject. (p.30)
Aim the AF point over the subject and
press the shutter button halfway to
autofocus.
Take the picture. (p.30)
Press the shutter button fully to take
the picture.
8
9
Review the picture on the LCD
monitor. (p.104)
The captured image will be displayed
for about 2 sec. on the LCD monitor.
To view images captured so far, see “Image Playback” (p.107).
To delete an image, see “Erasing Images” (p.118).
Download from Www.Somanuals.com. All Manuals Search And Download.
13
Nomenclature
For detailed information, reference page numbers are provided in
parentheses (p.**).
<R> Drive mode
selection/ISO speed
button (p.82/60)
<E> AF mode selection/
White balance selection button (p.74/61)
<U> LCD panel illumination button (p.98)
LCD panel (p.16)
<Q> Metering mode
selection/Flash exposure
compensation button (p.81/100)
EF Lens mount index (p.27)
Flash-sync contacts
<6> Main Dial
(p.31)
Hot shoe
Shutter button
(p.30)
Mode Dial (p.18)
Self-timer lamp
(p.48)
Strap mount
(p.21)
Grip
(Battery
compartment)
Terminal cover
DC coupler cord
hole (p.26)
Depth-of-field
preview button
(p.89)
Mirror (p.42,97)
Contacts (p.11)
Lens mount
Lens release button (p.27)
Lens lock pin
Digital terminal (p.124)
PC terminal (p.102)
Remote control
terminal (N3 type)
Body cap (p.27)
Video OUT terminal (p.116)
Download from Www.Somanuals.com. All Manuals Search And Download.
14
Nomenclature
Dioptric adjustment knob (p.44)
Eyecup (p.98)
<9> Multi-controller (p.32)
<A/I> AE lock/
FE lock button/Index/
Reduce button
Viewfinder eyepiece
(p.95/100/110/111,136)
<l> Direct print button
(p.138)
<S/u>
AF point selection/
Enlarge button
(p.77/111,136)
<M> Menu
button (p.33)
<B> Info/
Trimming orientation
button (p.72,107/136)
Strap mount
(p.21)
<C> Jump
button (p.114)
CF card slot
cover (p.28)
<x> Playback
button (p.107)
<L> Erase button
(p.118)
Battery
compartment
cover release
lever (p.24)
LCD monitor (p.36)
Tripod socket
Battery compartment
cover (p.24)
<4> Power/Quick Control
Dial switch (p.30)
Access lamp (p.29)
<5> Quick Control Dial (p.32)
<0> Setting button (p.33)
CF card slot (p.28)
CF card eject button (p.28)
Download from Www.Somanuals.com. All Manuals Search And Download.
15
Nomenclature
LCD Panel
- - -
- ])
- - -
Shutter speed
Busy (buSY)
ISO speed
AF point selection ([ -
-
CF card full warning (FuLL CF)
CF card error warning (Err CF)
No CF card warning (no CF)
Error code (Err)
gISO speed
Cleaning image sensor (CLn)
White balance
QAuto
Aperture
W
E
R
Y
U
I
Daylight
Shade
Cloudy
Tungsten light
White fluorescent light
Flash
Shots remaining
Shots remaining
during WB bracketing
Self-timer countdown
Bulb exposure time
O Custom
P
Color temperature
0Monochrome
shooting
Drive mode
uSingle-frame
iContinuous
shooting
2White balance
correction
j Self-timer
hAEB
Battery check
AF mode
XOne-Shot AF
zx
bn
9AI Focus AF
ZAI Servo AF
MBeeper
KCustom Function
Metering mode
qEvaluative metering
wPartial metering
rSpot metering
yFlash exposure compensation
Image-recording quality
37 Large/Fine
38 Large/Normal
47 Medium/Fine
48 Medium/Normal
67 Small/Fine
e
Center-weighted average metering
Exposure level indicator
Exposure compensation amount
AEB range
Flash exposure compensation amount
CF card writing status
68 Small/Normal
1 RAW
The actual display will show only the applicable items.
Download from Www.Somanuals.com. All Manuals Search And Download.
16
Nomenclature
Viewfinder Information
Spot metering circle
Focusing screen
AF points
(Superimposed display)
<A> AE lock/
AEB in-progress
<o> Focus confirmation
light
Max. Burst
<D> Flash-ready
Improper FE lock warning
White balance correction
<e> High-speed sync
(FP flash)
<d> FE lock/
FEB in-progress
Exposure level indicator
Exposure compensation amount
Flash exposure compensation
amount
<y> Flash exposure
compensation
AEB range
Shutter speed
FE lock (FEL)
Busy (buSY)
CF card full warning (FuLL CF)
CF card error warning (Err CF)
No CF card warning (no CF)
Aperture
The actual display will show only the applicable items.
Download from Www.Somanuals.com. All Manuals Search And Download.
17
Nomenclature
Mode Dial
l : Camera user setting (p.148)
: Bulb (p.96)
k
a : Manual exposure (p.90)
f : Aperture-priority AE (p.88)
s : Shutter-priority AE (p.86)
d
: Program AE (p.84)
1 : Full Auto (p.46)
Battery Charger CG-580
This is a battery pack charger. (p.22)
Power plug
Battery pack slot
Red lamp
Download from Www.Somanuals.com. All Manuals Search And Download.
18
Nomenclature
Battery Charger CB-5L
This is a battery pack charger. (p.22)
Battery pack slot
Red lamp
Power cord
Power cord socket
Do not use any AC adapters or compact power adapters other than the
ones (rated input: 100-240 V AC, 50/60 Hz, rated output: 7.8-8.1 V DC)
shown on the system map (p.168). Using such incompatible adapters
may result in fire, overheating, or electrical shock.
Download from Www.Somanuals.com. All Manuals Search And Download.
19
Conventions Used in this Manual
In the text, the <4> icon indicates the power switch.
All operations described in this manual assume that
the <4> switch is set to <1> or <J>.
The <6> icon indicates the Main Dial.
6
5
The <5> icon indicates the Quick Control Dial.
Operations with the <5> dial assume that the <4
switch is already set to < >. Be sure it is set to
>.
>
J
<J
In the text, the <9> icon indicates the Multi-controller.
9
0
In the text, the <0> icon indicates the SET button.It is
used for menu functions and Custom Functions.
In this manual, the icons and markings indicating the camera’s
buttons, dials, and settings correspond to the icons and markings on
the camera.
For more information, reference page numbers are provided in
parentheses (p.**).
The asterisk M appended on the right of the page title indicates that
the respective feature cannot be changed in the <1> (Full Auto)
mode.
The procedures assume that the menu settings and Custom
Functions are set to the default settings.
The
0), (9) or (8) indicates that the respective function remains active
for 4 sec., 6 sec., or 16 sec. respectively after you let go of the button.
This manual uses the following alert symbols:
The Caution symbol indicates a warning to prevent shooting problems.
3
icon indicates that the setting can be changed with the menu.
(
:
: The Note symbol gives supplemental information.
Download from Www.Somanuals.com. All Manuals Search And Download.
20
Getting Started
This chapter explains a few preliminary steps and basic
camera operations.
Attaching the Strap
Pass the end of the strap through
the camera’s strap mount from the
bottom. Then pass it through the
strap’s buckle as shown in the
illustration. Pull the strap to take up
any slack and make sure the strap
will not loosen from the buckle.
The eyepiece cover is also
attached to the strap. (p.98)
Eyepiece cover
Download from Www.Somanuals.com. All Manuals Search And Download.
21
Recharging the Battery
Remove the cover.
1
When you remove the battery from
the camera, be sure to reattach the
cover to protect against short circuit.
Attach the battery.
2
Align the battery front edge with the
<–> mark on the battery charger.
While pressing down the battery, slide
it in the direction of the arrow.
To detach the battery, follow the
above procedure in reverse.
<–> mark
For CG-580
Flip out the prongs and recharge
the battery.
As shown by the arrow, flip out the
battery charger’s prongs.
Insert the prongs into a power outlet.
CG-580
CB-5L
3
For CB-5L
Connect the power cord and
recharge the battery.
Connect the power cord to the
charger and insert the plug into the
power outlet.
X Recharging starts automatically and
the red lamp starts blinking.
X
The recharging time for a completely
exhausted battery is as follows:
BP-511A and BP-514: Approx. 100 min.
BP-511 and BP-512: Approx. 90 min.
Download from Www.Somanuals.com. All Manuals Search And Download.
22
Recharging the Battery
The numbers and markings on the
battery charger correspond to the
table on the left.
Recharge Leve
0-50%
l
Red lamp
Blinks once per second
Blinks twice per second
50-75%
Blinks three times
per second
75-90%
90% or higher
Lights on
Do not recharge any battery pack other than Battery Pack BP-511A, BP-
514, BP-511, or BP-512.
If the battery is left in the camera for a prolonged period without the camera
being used, a low electrical current may be discharged excessively and the
battery’s service life may be affected. When not using the camera, remove
the battery and attach the protective cover to prevent shorting. Before
using the camera again, be sure to recharge the battery.
Storing the battery while fully charged may reduce its service life or
performance.
Battery Packs BP-511A, BP-514, BP-511, and BP-512 are dedicated to
Canon products. Using them with a non-Canon battery charger or product
may result in malfunction or accidents for which Canon cannot be held liable.
After the red lamp lights, continue to recharge
the battery for an hour to attain a full charge.
Even a recharged, unused battery will gradually
drain its power. Recharge the battery on the day
before or on the day you plan to use it.
By referring to the marking, you can attach the protective cover to the
battery to indicate whether the battery has been recharged or not.
After recharging the battery, detach it and unplug the power cord from
the power outlet.
The time required to recharge the battery depends on the ambient
temperature and battery’s recharge level.
The battery pack can operate in temperatures from 0°C to 40°C (32°F to
104°F). However, for full operating performance, using it between 10°C
(50°F) and 30°C (86°F) is recommended. In cold locations such as ski
areas, battery performance temporarily decreases and the operating
time may be shorter.
If operating time is sharply reduced even after normal recharging, the battery
pack may have reached its service life. Replace it with a new battery.
Download from Www.Somanuals.com. All Manuals Search And Download.
23
Installing and Removing the Battery
Installing the Battery
Load a fully charged BP-511A battery pack into the camera.
Open the battery compartment
cover.
Slide the lever as shown by the arrow
1
and open the cover.
Insert the battery.
Point the battery contacts downward.
Insert the battery until it locks into
2
place.
Close the cover.
Press the cover until it snaps shut.
3
Battery Pack BP-514, BP-511, or BP-512 can also be used.
Checking the Battery Level
When the <4> switch is set to <1> or <J> (p.30), the battery level
will be indicated at one of four levels.
z
x
: Battery level OK.
: Battery level is low.
b: Battery will be exhausted soon.
n: Battery must be recharged.
Download from Www.Somanuals.com. All Manuals Search And Download.
24
Installing and Removing the Battery
Battery Life
Temperature
At 20°C / 68°F
At 0°C / 32°F
Shots remaining
Approx. 800
Approx. 400
The figures above are based on a fully-charged BP-511A and CIPA (Camera &
Imaging Products Association) testing criteria.
The actual number of shots may be fewer than indicated above
depending on the shooting conditions.
The number of possible shots will decrease with more frequent use of
the LCD monitor.
Pressing the shutter button halfway for long periods or operating the
autofocus only can reduce the number of possible shots.
The number of possible shots with the BP-514 is the same as indicated
in the table.
The number of possible shots with the BP-511 or BP-512 will be about
75% of the figures in the table for 20°C. At 0°C, the figures will be about
the same as in the table.
Removing the Battery
Open the battery compartment
cover.
Slide the lever as shown by the arrow
1
and open the cover.
Remove the battery.
2
Slide the battery lock lever as shown
by the arrow and remove the battery.
Download from Www.Somanuals.com. All Manuals Search And Download.
25
Using a Household Power Outlet
With AC Adapter Kit ACK-E2 (optional), you can connect the camera to
a household power outlet and not worry about the battery level.
Connect the DC Coupler.
1
Connect the DC Coupler’s plug to the
AC adapter’s socket.
Connect the power cord.
2
Connect the power cord to the AC
adapter.
Insert the plug into a power outlet.
When you are finished, disconnect
the plug from the power outlet.
Place the cord in the groove.
3
Carefully insert the cord into the
groove without damaging it.
Insert the DC Coupler.
4
Open the battery compartment cover
and open the DC Coupler cord notch
cover.
Insert the DC Coupler until the lock
position and put the cord through the
notch.
Close the cover.
Do not connect or disconnect the power cord while the camera’s <4>
switch is set to <1> or <J>.
Download from Www.Somanuals.com. All Manuals Search And Download.
26
Mounting and Detaching a Lens
Mounting a Lens
Remove the caps.
Remove the rear lens cap and the
1
body cap by turning them as shown
by the arrow.
Attach the lens.
2
Align the red dots on the lens and
camera and turn the lens as shown
by the arrow until it snaps in place.
On the lens, set the focus mode
3 switch to <AF>.
If it is set to <MF>, autofocus will not
be possible.
Remove the front lens cap.
4
Detaching the Lens
While pressing the lens release
button, turn the lens as shown by
the arrow.
Turn the lens until it stops, then
detach it.
When attaching or detaching the lens, take care to prevent dust from
entering the camera through the lens mount.
Download from Www.Somanuals.com. All Manuals Search And Download.
27
Installing and Removing the CF Card
The captured image will be recorded onto the CF card (optional).
Although the thickness is different, a Type I or Type II CF card can be
inserted into the camera. The camera is also compatible with Microdrive
and CF cards with 2 GB or higher capacity.
Installing the Card
Open the cover.
Slide the cover as shown by the
1
arrow to open it.
Top
Insert the CF card.
Using Canon CF cards is
recommended.
2
If the CF card is inserted in the
wrong way, it may damage the
camera. As shown by the arrow,
face the label side toward you and
insert the end with the small holes
into the camera.
CF card
eject button
X The CF card eject button pops out.
Close the cover.
3
Close the cover and slide it in the
direction shown by the arrow until it
snaps shut.
X When the <4> switch is set to
<1> or <J>, the shots remaining
is displayed on the LCD panel.
Shots remaining
The shots remaining depends on the remaining capacity of the CF card or
the image recording quality setting, the ISO speed setting, etc.
Download from Www.Somanuals.com. All Manuals Search And Download.
28
Installing and Removing the CF Card
Removing the CF Card
Open the cover.
1
Turn the <4> switch to <2>.
Check that the “buSY” message is
not displayed on the LCD panel.
Make sure the access lamp is off,
then open the cover.
Access lamp
Remove the CF card.
2
Press the Eject button.
X The CF card will be ejected.
Close the cover.
When the access lamp is lit or blinking, it indicates that the images
are being written to or read by the CF card or being erased. While
the access lamp is lit or blinking, do not do any of the following.
Doing so may damage the image data, CF card, or camera.
• Shaking or banging the camera around.
• Open the CF card slot cover.
• Removing the battery.
If “Err CF” (Error CF) is displayed on the LCD panel, see page 120.
If you use a low-capacity CF card, it might not be able to record large
images.
A Microdrive is vulnerable to vibration and physical shock. If you use a
Microdrive, be careful not to subject the camera to vibration or physical
shock especially while recording or displaying images.
On the menu, if you set the [z Shoot w/o card] to [Off], it will prevent
shooting without a CF card. (p.99)
Download from Www.Somanuals.com. All Manuals Search And Download.
29
Basic Operation
Power Switch
The camera can operate only after the <4> switch is turned on.
<2>: The camera is turned off and
does not operate.
<1> : The camera operates.
<J> : The camera and <5> operate.
(p.32)
To save battery power, the camera turns off automatically after 1 minute of non-
operation. To turn on the camera again, press the shutter button or other button.
You can change the auto power-off time with the menu’s [c Auto
power off] setting. (p.39)
If you turn the <
onto the CF card, the remaining number of captured images to be recorded will be
indicated on the top LCD panel with the number of < >. When all the images are
finished recording, the display will turn off and the camera will turn off.
4> switch to <2> while the captured images are being recorded
N
Shutter Button
The shutter button has two steps. You can press the shutter button
halfway. Then you can further press the shutter button completely.
Pressing halfway
This activates autofocusing (AF) and
automatic exposure (AE) that sets the
shutter speed and aperture.
The exposure setting (shutter speed and
aperture) is displayed on the top LCD
panel and in the viewfinder. (0)
Pressing completely
This releases the shutter and takes the
picture.
Download from Www.Somanuals.com. All Manuals Search And Download.
30
Basic Operation
If you press the shutter button halfway and (0) elapse, you must press it
halfway again and wait a moment before pressing it completely to take a
picture. If you press the shutter button completely without pressing it halfway
first or if you press the shutter button halfway and then press it completely
immediately, the camera will take a moment before it takes the picture.
No matter what state the camera is in (image playback, menu operation,
image recording, etc.), you can return to shooting instantly just by
pressing the shutter button halfway (except during direct printing).
Camera movement during the moment of exposure is called camera
shake. Camera shake can cause blurred pictures. To prevent camera
shake, note the advice below. Also see “Holding the Camera” (p.44).
• Hold the camera steady.
• Put your finger tip on the shutter button, hold the camera with your right
hand, then press the shutter button gently.
Operating the <6> Dial
The <6> dial is mainly used for shooting-related settings.
After pressing a button, turn the
(1)
<6> dial.
When you press a button, its function
remains active for 6 seconds (
this time, you can turn the <
9
). During
6
> dial to set
the desired setting. When the timer runs
out or if you press the shutter button down
halfway, the camera will be ready to shoot.
In this way, you can set the AF mode,
drive mode, and metering mode and
select or set the AF point.
Turn the <6> dial only.
(2)
While looking at the LCD panel or
viewfinder, turn the <6> dial to set the
desired setting.
In this way, you can set the shutter
speed, aperture, etc.
Download from Www.Somanuals.com. All Manuals Search And Download.
31
Basic Operation
Operating the <5> Dial
The <5> dial is mainly used for shooting-related settings and selecting
LCD monitor items. When you want to use the <5> dial to prepare for
shooting, set the <4> switch to <J> first.
(1) After pressing a button, turn the
<5> dial.
When you press a button, its function remains active
for 6 seconds (9). During this time, you can turn
the < > dial to set the desired setting. When the
5
timer ends or if you press the shutter button down
halfway, the camera will be ready to shoot.
You can select the AF point or set the
white balance, ISO speed, and flash
exposure compensation.
When using the LCD monitor, you
can select menu operations and
select images during playback.
(2) Turn the <5> dial only.
While looking at the LCD panel or viewfinder,
turn the <
You can set the exposure compensation
or the aperture in the < > mode.
5> dial to set the desired setting.
a
You can also operate (1) when the <4> switch is set to <1>.
Operating the <9>
The <9> consists of eight direction
keys and a button at the center. Use it to
select an AF point, set white balance
correction, scroll around a magnified
image display, and move the trimming
frame for direct printing.
Download from Www.Somanuals.com. All Manuals Search And Download.
32
Menu Operations
By setting various optional settings with the menus, you can set the
image recording quality, Picture Style, the date/time, Custom Functions,
etc. While looking at the LCD monitor, you use the <M> button,
<0> button, and <5> dial on the camera back to proceed to the next
step.
LCD Monitor
<M> button
<5> Quick
Control Dial
<C> button
<0> button
Menu category
color code
Menu category
Menu settings
Menu items
The menu screen is color coded for the three menu categories.
Icon
z
Color
Red
Category
Description
Shooting menu Shooting-related menu
x
c
Blue
Playback menu Image playback-related menu
Yellow Set-up menu
Camera’s basic settings
Press the <C> button to jump to the first item of each menu
category.
You can use the <5> dial even when the <4> switch is <1>.
Even while the menu is displayed, you can instantly go back to shooting
by pressing the shutter button halfway.
Download from Www.Somanuals.com. All Manuals Search And Download.
33
Menu Operations
Menu Setting Procedure
Display the menu.
1
Press the <M> button to display
the menu. To turn off the menu, press
the button again.
Select a menu item.
Turn the <5> dial to select the menu
item, then press <0>.
Press the <C> button to jump to
the first item of each menu category.
2
3
Select the menu setting.
Turn the <5> dial to select the
desired setting.
Set the desired setting.
Press <0> to set it.
4
5
Exit the menu.
Press the <M> button to exit the
menu display.
Certain menu items are not displayed in the
<1>
(Full Auto) mode.
(p.35)
You can also use the <6> dial to select menu items or playback images.
The explanation of menu functions hereinafter assumes that you pressed
the <M> button to display the menu screen.
Menu operation will also work after the picture is taken while the image is
being recorded to the CF card (access lamp blinks).
Download from Www.Somanuals.com. All Manuals Search And Download.
34
Menu Operations
Menu Settings
Reference
pages
<z> Shooting menu (Red)
73/83/74/84/76/86/ RAW/
RAW+73/ +83/ +74/ +84/ +76/ +86
Quality
50
Beep
On / Off
99
99
93
Shoot w/o card
AEB
On / Off
1/3-stop increments, ±2 stops
WB SHIFT/BKT
Custom WB
Color temp.
Color space
9 levels of B/A/M/G color bias / B/A and M/G bias 1 level, ±3 levels 64,65
Manual setting of white balance
Set to 2800K - 10000K (100K increments)
sRGB / Adobe RGB
62
63
67
Standard / Portrait / Landscape / Neutral / Faithful /
Monochrome / User Defined 1, 2, 3
53,55,
58
Picture Style
<x> Playback menu (Blue)
Protect
Protect image
117
113
139
112
104
108
109
Rotate
Rotate image
Print order
Auto play
Review time
AF points
Histogram
Specifies images to be printed (DPOF).
Auto playback of images
Off / 2 sec. / 4 sec. / 8 sec. / Hold
Display / Not display
Bright. / RGB
Items not displayed in the <1> (Full Auto) mode.
In the <1> (Full Auto) mode, the RAW and RAW+JPEG recording quality
modes are not displayed.
Download from Www.Somanuals.com. All Manuals Search And Download.
35
Menu Operations
<c> Set-up menu (Yellow)
Auto power off
1min. / 2 min. / 4 min. / 8 min. / 15 min. / 30 min. / Off
39
105
106
40
Auto rotate
On / Off
LCD brightness
Date/Time
5 levels
Setting the Date/Time
Continuous / Auto reset / Manual reset
Folder selection and creation
File numbering
Select folder
70
68
15 languages provided (English, German, French, Dutch, Danish,
Finnish, Italian, Norwegian, Swedish, Spanish, Russian,
Language
38
Simplified Chinese, Traditional Chinese, Korean, and Japanese.)
Video system
Communication
Format
NTSC / PAL
116
123
120
149
37
Print/PTP / PC connect.
Initializes and erases card
Customize the camera
Custom Functions (C.Fn
)
Clear all camera settings (Reset the camera to the default
settings.)
Clear all Custom Functions (Resets all Custom Function
settings to the default.)
Clear registered camera set. (Resets the Mode Dial’s <l>
setting to the default.)
150
148
Clear settings
Register camera
settings
Register current camera settings to the Mode Dial’s <l>
setting.
148
42
–
Sensor cleaning
Select to clean the sensor.
Image transfer
(LAN) settings
Displayed when Wireless File Transmitter WFT-E1/E1A is
used.
Firmware Ver.
Select to update the firmware.
–
Items not displayed in the <1> (Full Auto) mode.
About the LCD Monitor
The LCD monitor cannot be used as a viewfinder for shooting.
You can adjust the brightness of the LCD monitor to one of five
levels. (p.106)
Download from Www.Somanuals.com. All Manuals Search And Download.
36
Menu Operations
Restoring the Camera’s Default SettingsN
Select [Clear settings].
1
2
3
Turn the <5> dial to select [c
Clear settings], then press <0>.
Select [Clear all camera settings].
Turn the <5> dial to select [Clear all
camera settings], then press<0>.
Select [OK].
Turn the <5> dial to select [OK],
then press <0>. The default settings
will be restored.
X The camera’s default settings will be
as shown below.
Image-Recording Settings
Shooting Settings
AF mode One-Shot AF
Quality
73
100
AF point selection Automatic AF point selection ISO speed
Metering mode
Drive mode
Evaluative metering
Single shooting
Color space
sRGB
Q
White balance
Exposure
compensation
Color
temperature
0 (Zero)
Off
5200K
AEB
WB correction
WB-BKT
Off
Flash exposure
compensation
Off
0 (Zero)
Picture Style
Standard
Custom Functions Current settings retained
The Picture Styles will also be reset to their default settings.
Download from Www.Somanuals.com. All Manuals Search And Download.
37
3 Setting the Language
The LCD monitor’s interface language can be set to one of fifteen languages.
Select [Language].
1
Turn the <5> dial to select [c
Language], then press <0>.
X The Language screen will appear.
Set the desired language.
2
Turn the <5> dial to select the
language, then press <0>.
X The language will change.
English
Deutsch
Français
Nederlands
Dansk
English
German
French
Dutch
Danish
Suomi
Finnish
Italiano
Norsk
Italian
Norwegian
Swedish
Spanish
Svenska
Español
Russian
Simplified Chinese
Traditional Chinese
Korean
Japanese
Download from Www.Somanuals.com. All Manuals Search And Download.
38
3
Set the power-off time/Auto power off
You can set the auto power-off time for the camera to turn off
automatically after a set time of idle operation. If you do not want the
camera to turn off automatically, set this to [Off]. After the power turns
off, you can turn on the camera again by pressing the shutter button or
other button.
Select [Auto power off].
1
Turn the <5> dial to select [c Auto
power off], then press <0>.
Set the desired time.
2
Turn the <5> dial to select the
desired time, then press <0>.
After auto power off, you can turn on the camera again with any of the
following buttons: Shutter button, <R> button, and <M>
button. Pressing the <9>, <L>, or <C> button will not turn on the
camera.
If auto power off is [OFF], and the LCD monitor is left on, the LCD
monitor will turn off after 30 min.
Download from Www.Somanuals.com. All Manuals Search And Download.
39
3 Setting the Date and Time
Set the date and time as shown below.
Select [Date/Time].
Turn the <5> dial to select [c Date/
1
Time], then press <0>.
X The date/time screen will appear.
Set the date and time.
Pressing the <0> button toggles the
orange box between
With the box displayed, turn the
2
3
and
.
<5> dial to select the date or time to
be corrected, then press <0>.
With the
box displayed, turn the
<5> dial to select the correct
numeral, then press <0>.
Confirm the setting.
With the
box displayed, turn the
<5> dial to select [OK], then press
<0>.
X The date/time will be set and the
menu will reappear. The minute that
was set will then start from 0 sec.
Each captured image is recorded with the date and time it was taken. If the
date and time are not properly set, the wrong date/time will be recorded.
Make sure you set the date and time correctly.
Download from Www.Somanuals.com. All Manuals Search And Download.
40
Replacing the Date/Time Battery
The date/time (back-up) battery maintains the camera’s date and time.
The battery’s service life is about 5 years. If the date/time is reset when
the battery is replaced, replace the back-up battery with a new CR2016
lithium battery as described below.
The date/time setting will also be reset, so you must set the
correct date/time.
Turn the <4> switch to <2>.
1
Unscrew the battery holder
2 screw.
Use a small Philips screwdriver.
Be careful not to lose the screw.
Take off the battery holder.
3
Push out the battery in direction 2.
Replace the battery in the battery
4 holder.
Make sure the battery is in the proper
+ – orientation.
Tighten the battery holder screw.
5
For the date/time battery, be sure to use a CR2016 lithium battery.
Download from Www.Somanuals.com. All Manuals Search And Download.
41
3 Cleaning the CMOS sensorN
The image sensor is like the film in a film camera. If any dust adheres
on the image sensor, it may show up as a dark speck on the images. To
avoid this, follow the procedure below to clean the image sensor.
Using the AC Adapter Kit ACK-E2 (optional, see page 166) is
recommended. If you use a battery, make sure the battery level is
sufficient.
Install the DC Coupler (p.26) or a
1
battery and turn the <4> switch
to <1>.
Select [Sensor cleaning].
2
Turn the <5> dial to select [c
Sensor cleaning], then press <0>.
X If you are using a battery with
sufficient power, the screen shown in
step 3 will appear.
If the battery is exhausted, a warning
message will appear and you will not
be able to proceed further. Either
recharge the battery or use a DC
coupler and start from step 1 again.
Select [OK].
Turn the <5> dial to select [OK],
3
then press <0>.
X The mirror will lock up and the shutter
will open.
X “CLn” will blink on the LCD panel.
Download from Www.Somanuals.com. All Manuals Search And Download.
42
3 Cleaning the CMOS sensorN
Clean the image sensor.
4
5
Use a rubber blower to carefully blow
away any dust, etc., on the surface of
the image sensor.
Stop the cleaning.
Turn the <4> switch to <2>.
X The camera will turn off, the shutter
will close, and the mirror will go back
down.
Set the <4> switch to <1>. The
camera will then be ready to shoot.
During the sensor cleaning, never do any of the following that
would turn off the power. If the power is cut off, the shutter will
close and it may damage the shutter curtains and image sensor.
• Turn the <4> switch to <2>.
• Open the CF card slot cover.
• Open the battery compartment cover.
Do not insert the blower tip inside the camera beyond the lens mount. If
the power goes out, the shutter will close and the shutter curtains and
image sensor may be damaged.
Use a blower not attached with a brush. A brush can scratch the sensor.
Never use canned air or gas to clean the sensor. The blowing force can
damage the sensor or the spray gas can freeze on the sensor.
When the battery is exhausted, the beeper will sound and the <c>
icon will blink on the LCD panel. Set the <4> switch to <2> and
replace the battery. Then start over again.
You cannot clean the sensor if Battery Grip BG-E4 (optional) is attached
to the camera and size-AA batteries supply the power. Use AC Adapter
Kit ACK-E2 (optional) or use a battery having sufficient power.
If you cannot remove all of the dust, consult a Canon Service Center.
Download from Www.Somanuals.com. All Manuals Search And Download.
43
Dioptric Adjustment
By adjusting the diopter to suit your eyesight, you can see a sharp
viewfinder image even without eyeglasses. The camera’s adjustable
dioptric range is -3 to +1 dpt.
Turn the dioptric adjustment
knob.
Turn the knob left or right so that the
AF points in the viewfinder look sharp.
The illustration shows the knob at the
standard setting (-1 dpt).
If the camera’s dioptric adjustment still cannot provide a sharp viewfinder
image, using Dioptric Adjustment Lens E (10 types, optional) is
recommended.
Holding the Camera
To obtain sharp images, hold the camera still to minimize camera shake.
Horizontal shooting
Vertical shooting
Firmly grasp the camera grip with your right hand, and press your
both elbows lightly against your body.
Hold the lens bottom with your left hand.
Press the camera against your face and look through the viewfinder.
To maintain a stable stance, place one foot in front of the other
instead of lining up both feet.
Download from Www.Somanuals.com. All Manuals Search And Download.
44
Fully Automatic
Shooting
This chapter explains how to use the Mode Dial’s <
1>
(Full Auto) mode for easy shooting. The < > mode
1
automatically sets the AF mode, drive mode, etc. All you
do is point and shoot. In addition, to help prevent mistakes
caused by operating the camera improperly, the <
E>
<i
> < > < > < > buttons and < > are
Q
S
A
9
disabled in these modes. So you need not worry about
accidental errors.
Download from Www.Somanuals.com. All Manuals Search And Download.
45
1Using Full Auto
All you do is point the camera and press the shutter button for quick and
easy shooting. With nine AF points to focus the subject, anyone can
easily take nice pictures.
Set the Mode Dial to <1>.
1
X Automatically, the AF mode will be set
to <9>, the drive mode will
be set to <u>, and the metering
mode will be set to <q>.
AF point
Aim any AF point over the
2 subject.
Out of the nine AF points, the one
covering the closest subject is
selected automatically to achieve
focus.
Focus the subject.
Press the shutter button halfway to
3
focus.
X The AF point which achieves focus
flashes in red briefly. At the same
time, the beeper will sound and the
focus confirmation light <o> in the
Focus confirmation light
viewfinder will light.
Shutter speed
Aperture
Check the display.
X The shutter speed and aperture value
4
will be set automatically and
displayed in the viewfinder and on the
LCD panel.
Download from Www.Somanuals.com. All Manuals Search And Download.
46
1Using Full Auto
Take the picture.
Compose the shot and press the
shutter button completely.
5
X The captured image will be displayed
for about 2 sec. on the LCD monitor.
To view the images recorded on the
CF card, press the <x> button.
(p.107)
If you want to zoom, do it before focusing. Turning the zoom ring after
achieving focus may throw off the focus.
When the CF card becomes full, the CF Full warning “FuLL CF” will
appear in the viewfinder and on the LCD panel and shooting will be
disabled. Replace the CF card with one that has room.
Using a non-Canon lens with an EOS camera may not result in proper
camera or lens operation.
When focus is achieved, the focus and exposure setting will also be
locked.
If the focus confirmation light <o> blinks, the picture cannot be taken.
(p.80)
Multiple AF points may flash simultaneously in red. This indicates that
focus has been achieved at all those AF points.
You can disable the beeper from sounding when focus is achieved.
(p.99)
The image review time after image capture can be changed with the
menu’s [x Review time] setting. (p.104)
If you want to select the AF point to be used for focusing, set the Mode
Dial to <d>, then follow “Selecting the AF Point” (p.77) to select the AF
point.
Download from Www.Somanuals.com. All Manuals Search And Download.
47
jSelf-timer Operation
Use the self-timer when you want to be in the picture.
Press the <R> button. (9)
1
2
Select <j>.
Look at the LCD panel and turn the
<6> dial to select <j>.
Focus the subject.
3
Look in the viewfinder and press the
shutter button halfway to check that
the focus confirmation light is on and
the exposure setting is displayed.
Take the picture.
Look through the viewfinder and
4
press the shutter button completely.
X
The beeper will sound, the self-timer
lamp will blink, and the shot will be
taken about 10 sec. later. During the
first 8 sec., the beeper beeps slowly
and the lamp blinks slowly. Then
during the final 2 sec., the beeper
beeps faster and the lamp stays lit.
X During the self-timer operation, the
LCD panel counts down the seconds
until the picture is taken.
Do not stand in front of the camera when you press the shutter button to
start the self-timer. Doing so will throw off the focus.
Use a tripod when you use the self-timer.
To cancel the self-timer after it starts, press the <R> button.
When using the self-timer to shoot only yourself, use focus lock (p.79) for
an object at about the same distance as where you will be.
You can also silence the beeper. (p.99)
Download from Www.Somanuals.com. All Manuals Search And Download.
48
Image Settings
This chapter explains the digital image settings for the
image-recording quality, Picture Style, ISO speed, white
balance, and color space.
In the <1> (Full Auto) mode, only the following settings
explained in this chapter can be set: Recording quality
(except RAW and RAW+JPEG), file numbering method
selection, folder selection and creation, and checking
camera settings.
The asterisk M appended on the right of the page title
indicates that the respective feature cannot be changed in
the <1> (Full Auto) mode.
Download from Www.Somanuals.com. All Manuals Search And Download.
49
3 Setting the Image-recording Quality
The 73/83/74/84/76/86modes record the image in the
widely-used JPEG. In the 1mode, the captured image will require
post-processing with the software provided. The 1+73/+83/
+74/+84/+76/+86(RAW+ JPEG) modes simultaneously
record the image in both RAW and JPEG. Note that in the <1> (Full
Auto) mode, RAW or RAW+JPEG cannot be set.
Select [Quality].
Turn the <5> dial to select [z
1
Quality], then press <0>.
X
The recording quality screen will appear.
Set the desired recording quality.
2
Turn the <5> dial to select the
desired recording quality, then press
<0>.
Image-recording Quality Settings
Image Type
(extension)
Image-recording
Quality
Pixels
Print Size
A3 or larger
A4 - A3
73(Large Fine)
4368 x 2912
(Approx. 12.7 million)
83(Large Normal)
74(Medium Fine)
84(Medium Normal)
76(Small Fine)
JPEG
(.JPG)
3168 x 2112
(Approx. 6.7 million)
2496 x 1664
(Approx. 4.2 million
A4 or smaller
A3 or larger
)
86(Small Normal)
RAW
(.CR2)
4368 x 2912
(Approx. 12.7 million)
1(RAW)
The
For better image quality, select <
you can record more images, select a higher compression <
7
(Fine) and
8
(Normal) icons indicate the image’s compression rate.
> for low compression. To save space so
>.
7
8
With RAW+JPEG, the RAW and JPEG images will be saved under the
same file No. in the same folder.
Download from Www.Somanuals.com. All Manuals Search And Download.
50
3 Setting the Image-recording Quality
Image File Size and CF Card Capacity According to Image-Recording Quality
Image-recording Quality Image File Size (Approx. MB)
Possible Shots
73
4.6
2.3
2.7
1.4
2.0
1.0
101
196
168
319
233
446
22
83
74
84
76
86
1+73
1+83
1+74
1+84
1+76
1+86
1
25
24
–
26
25
27
12.9
29
The number of possible shots and maximum burst (p.52) apply to a Canon
512MB CF card.
The single image size, number of possible shots, and maximum burst during continuous
shooting are based on Canon’s testing standards (ISO 100, Picture Style: [Standard]).
The actual single image size, number of possible shots, and maximum burst will vary
depending on the subject, shooting mode, ISO speed, Picture Style, etc.
In the case of monochrome images (p.53), the file size will be smaller so the
number of possible shots will be higher.
On the top LCD panel, you can check the remaining number of images the CF
card can record.
About the RAW
The RAW assumes that the image will undergo post-processing with a
personal computer. Special knowledge is required, but you can use the
bundled software to obtain the desired effect.
Image processing refers to adjusting the RAW image’s white balance,
contrast, etc., to create the desired image.
Note that direct printing and print ordering (DPOF) will not work with
RAW images.
Download from Www.Somanuals.com. All Manuals Search And Download.
51
3 Setting the Image-recording Quality
Max. Burst During Continuous Shooting
The maximum burst during continuous shooting depends on the image-
recording quality. The approx. maximum burst during continuous
shooting is indicated below for each image-recording quality. Note that
with high-speed CF cards, the maximum burst may be higher than
shown in the table below depending on the shooting conditions
.
Image-
recording
Quality
73 83 74 84 76 86 1 1+JPEG
60 150 120 319* 200 446* 17 12
Max. Burst
* Continuous shooting is possible until the CF card becomes full.
The number of shots remaining during the
maximum burst is displayed on the lower
right of the viewfinder.
Max. Burst
If “9” is displayed, it indicates that the maximum burst is nine or more
shots. If “6” is displayed, it is six shots.
While you are shooting and the number of shots remaining in the
maximum burst is fewer than 9, the viewfinder will display “ ”, “ ”, etc. If
8
7
you stop the continuous shooting, the maximum burst will increase.
After all the captured images are processed and written to the CF card, the
above table’s figures for the maximum burst will apply.
With white balance bracketing (p.65), the maximum burst will be lower.
The maximum burst is displayed even when the drive mode is set to
<u> (Single) or <j>. The maximum burst is displayed even when a
CF card is not in the camera. Therefore, before shooting, make sure that
a CF card is installed in the camera.
Download from Www.Somanuals.com. All Manuals Search And Download.
52
3 Selecting a Picture StyleN
By selecting a Picture Style, you can obtain the desired image effects.
You can also adjust the settings of each Picture Style to obtain custom
image effects.
Select [Picture Style].
1
Turn the <5> dial to select [z
Picture Style], then press <0>.
X The Picture Style selection screen will
appear.
Select a Picture Style.
2
Turn the <5> dial to select the
desired Picture Style, then press
<0>.
Picture Style Effects
• Standard
The image looks vivid, sharp, and crisp. This is the Picture Style
used in the <1> (Full Auto) mode.
• Portrait
For nice skin tones. The image looks slightly sharp and crisp.
By changing the [Color tone] (p.54), you can adjust the skin tone.
• Landscape
For vivid blues and greens, and very sharp and crisp images.
• Neutral
For natural colors and subdued images. No sharpness is applied.
• Faithful
When the subject is photographed under a color temperature of
5200K, the color is adjusted colorimetrically to match the subject’s
color. No sharpness is applied.
Download from Www.Somanuals.com. All Manuals Search And Download.
53
3 Selecting a Picture StyleN
• Monochrome
For black-and-white images.
To obtain natural-looking, black-and-white images, set a suitable
white balance.
JPEG black-and-white images captured with the [Monochrome]
setting cannot be converted into color images even with image-
editing software.
RAW images captured with the [Monochrome] setting can be
converted into color images with the bundled software.
• User Defined 1-3
You can register your own Picture Style settings (p.58). Any User
Defined Picture Style which has not been set will have the same
settings as the Standard Picture Style.
About the Picture Style selection screen
The symbols on the upper right of the Picture Style selection screen
refer to the sharpness, contrast, color saturation, color tone, filter effect,
and color toning.
The numerals indicate the settings for each.
Symbols
Sharpness
Contrast
Color saturation
Color tone
Filter effect (Monochrome)
Color toning (Monochrome)
Download from Www.Somanuals.com. All Manuals Search And Download.
54
3 Customizing the Picture StyleN
You can customize the Picture Style by changing the individual
parameters like [Sharpness] and [Contrast]. To customize
[Monochrome], see page 56.
Select [Picture Style].
1
Turn the <5> dial to select [z
Picture Style], then press <0>.
X The Picture Style selection screen will
appear.
Select a Picture Style.
2
Turn the <5> dial to select the
desired Picture Style other than
[Monochrome], then press
<C>.
X The setting screen will appear.
Set the parameters.
3
Turn the <5> dial to select a
parameter like [Sharpness], then
press <0>.
Turn the <5> dial to set the desired
setting, then press <0>.
To return to the Picture Style selection
screen, press the <M> button.
X Any settings different from the default
will be displayed in blue.
Parameters and Their Settings
Sharpness
Contrast
[0] : Less sharp outline
[-4] : Low contrast
[+7] : Sharp outline
[+4] : High contrast
Color saturation [-4] : Low saturation
Color tone [-4] : Reddish skin tone
[+4] : High saturation
[+4] : Yellowish skin tone
Download from Www.Somanuals.com. All Manuals Search And Download.
55
3 Customizing the Picture StyleN
Monochrome Adjustment
For Monochrome, you can also set [Filter effect] and [Toning effect]
(p.57) in addition to [Sharpness] and [Contrast].
Select [Monochrome].
1
Follow step 2 on page 53 to select
[Monochrome], then press the
<C> button.
X The setting screen will appear.
Set the parameters.
2
Turn the <5> dial to select a
parameter like [Sharpness], then
press <0>.
Turn the <5> dial to set the desired
setting, then press <0>.
To return to the Picture Style selection
screen, press the <M> button.
X Any settings different from the default
will be displayed in blue.
When the camera returns to shooting,
<0> will be displayed on the LCD
panel.
Download from Www.Somanuals.com. All Manuals Search And Download.
56
3 Customizing the Picture StyleN
Filter effects
The same effect as using filters with black-and-white film can be
obtained with digital images. A color can be brightened by using a filter
having a similar or same color. At the same time, the complementary
colors will be darkened.
Filter
Sample effects
Normal black-and-white image with
no filter effects.
N: None
The blue sky will look more natural,
and the white clouds will look
clearer.
Ye: Yellow
The blue sky will look slightly
Or: Orange darker. The sunset will look more
brilliant.
The blue sky will look quite dark.
R: Red
Fall leaves will look crisper and
brighter.
Skin tones and lips will look fine.
Tree leaves will look crisper and
brighter.
G: Green
Setting the [Contrast] to the plus side will make the filter effect more
pronounced.
Toning Effect
When color toning is set, color toning will be applied to the captured
black-and-white image before being recorded to the CF card. It can
make the image look more impressive.
The following can be selected:
[N:None] [S:Sepia] [B:Blue] [P:Purple]
[G:Green]
Download from Www.Somanuals.com. All Manuals Search And Download.
57
3 Registering the Picture StyleN
You can register your own Picture Style in User Defined 1 to 3.
You can set the Sharpness, Contrast, and other parameters to suit your
preferences. You can also select a Picture Style already set with the
provided software.
Select [Picture Style].
1
Turn the <5> dial to select [z
Picture Style], then press <0>.
X The Picture Style selection screen will
appear.
Select [User Defined]
2
Turn the <5> dial to select [User
Defined 1/2/3], then press <C>
button.
X The setting screen will appear.
Select the base Picture Style.
3
With the [Picture Style] selected,
press <0>.
Turn the <5> dial to select the base
Picture Style, then press <0>.
If you have a Picture Style already set
with the provided software, select it
here.
Download from Www.Somanuals.com. All Manuals Search And Download.
58
3 Registering the Picture StyleN
Set the parameters.
4
Turn the <5> dial to select a
parameter like [Sharpness], then
press <0>.
Turn the <5> dial to set the desired
setting, then press <0>.
For details, see “Customizing the
Picture Style” on pages 55-57.
Press the <M> button to register
the new Picture Style. The Picture
Style selection screen will then
reappear.
X The base Picture Style will be
displayed on the right of [User
Defined 1/2/3].
X When the parameter like
[Sharpness] is changed from the
default, the name of the base Picture
Style will be displayed in blue.
Changing the Picture Style setting inadvertently
If a User Defined Picture Style is already registered with your own Picture
Style, following the procedure on page 58 up to step 3 for that User Defined
Picture Style will revert it back to the default setting.
If you do not want to change the User Defined Picture Style, do not repeat
this procedure.
Download from Www.Somanuals.com. All Manuals Search And Download.
59
gSetting the ISO SpeedN
The ISO speed is a numeric indication of the sensitivity to light. A higher
ISO speed number indicates a higher sensitivity to light. Therefore, a
high ISO speed is suited for low light and moving subjects. However,
the image may look more coarse with noise, etc. On the other hand, a
low ISO speed is not suited for low light or action shots, but the image
will look cleaner.
The camera can be set between ISO 100 and 1600 in 1/3-stop
increments.
In the <1> (Full Auto) mode, the ISO speed will be set automatically
within ISO 100-400.
Press the <R> button. (9)
X The current ISO speed will be
1
displayed on the LCD panel.
In the <1> (Full Auto) mode, “Auto”
will be displayed on the LCD panel.
Setting the ISO Speed.
2
While looking at the top LCD panel,
turn the <5> dial.
At higher ISO speeds and higher ambient temperatures, the image will
have more noise.
High temperatures, high ISO speeds, or long exposures may cause
irregular colors in the image.
When C.Fn-08 [ISO expansion] is set to [1: On] (p.153), “L” (ISO 50)
and “H” (ISO 3200) can also be set.
When you press the <R> button, the viewfinder will show the
current ISO speed or “Auto”.
Download from Www.Somanuals.com. All Manuals Search And Download.
60
BSetting the White BalanceN
Normally, the <
automatically. If natural-looking colors cannot be obtained with <
you can set the white balance manually to suit the respective light source.
Q> setting will set the optimum white balance
Q
>,
In the <
1
> (Full Auto) mode, <Q> will be set automatically.
Press the <E> button. (9)
1
Select the white balance setting.
While looking at the top LCD panel,
turn the <5> dial.
2
Display
Q
W
Mode
Auto
Color temperature (Approx. K)
3000 - 7000
5200
Daylight
E
R
Shade
7000
Cloudy, twilight, sunset
Tungsten
6000
Y
3200
U
White fluorescent light
Flash
4000
I
6000
O
P
Custom*
2000 - 10000
2800 - 10000
Color temperature
* Set the optimum white balance manually to suit the lighting. (p.62)
About White Balance
The three RGB (red, green, and blue) primary colors exist in the light source in
varying proportions depending on the color temperature. When the color
temperature is high, there is more blue. And when the color temperature is low,
there is more red. To the human eye, a white object looks white regardless of
the type of lighting. With a digital camera, the color temperature can be adjusted
with software so that the colors in the image look more natural. The subject’s
white color is used as the criteria for adjusting the other colors. The camera’s
<Q
> setting uses the CMOS sensor for auto white balance.
Download from Www.Somanuals.com. All Manuals Search And Download.
61
3Custom White BalanceN
With custom white balance, you shoot a white object that will serve as
the basis for the white balance setting. By selecting this image, you
import its white balance data for the white balance setting.
Photograph a white object.
1
The plain, white object should fill the
spot metering circle.
Set the lens focus mode switch to
<MF>, then focus manually. (p.80)
Set any white balance setting. (p.61)
Shoot the white object so that a
Spot metering
standard exposure is obtained.
Select [Custom WB].
2
Turn the <5> dial to select [z
Custom WB], then press <0>.
X The custom white balance screen will
appear.
Select the image.
3
Turn the <5> dial to select the
image captured in step 1, then press
<0>.
X The image’s white balance data will
be imported and the menu will
reappear.
Select the custom white balance.
4
After exiting the menu, press the
<E> button.
Look at the LCD panel and turn the
<5> dial to select <O>.
Download from Www.Somanuals.com. All Manuals Search And Download.
62
3 Custom White BalanceN
If the exposure obtained in step 1 is underexposed or overexposed, a
correct white balance might not be obtained.
If an image was captured while the Picture Style was set to
[Monochrome] (p.54), it cannot be selected in step 3.
Instead of a white object, an 18% gray card (commercially available) can
produce a more accurate white balance.
3 Setting the Color TemperatureN
You can numerically set the white balance’s color temperature.
Press the <E> button. (9)
1
Select the color temperature.
2
Look at the LCD panel and turn the
<5> dial to select <P>.
On the menu, select [Color
3 temp.].
Turn the <5> dial to select [z
Color temp.], then press <0>.
Set the color temperature.
4
Turn the <5> dial to select the
desired color temperature, then press
<0>.
The color temperature can be set from
2800K to 10000K in 100K increments.
When setting the color temperature for an artificial light source, set white
balance correction (magenta or green bias) as necessary.
If you want to set <P> to the reading taken with a color temperature
meter, take test shots and adjust the setting to compensate for the
difference between the color temperature meter’s reading and the
camera’s color temperature reading.
Download from Www.Somanuals.com. All Manuals Search And Download.
63
3White Balance CorrectionN
You can correct the standard color temperature for the white balance
setting. This adjustment will have the same effect as using a color
temperature conversion or color compensating filter. Each color can be
corrected to one of nine levels. Users familiar with using color temperature
conversion or color compensating filters will find this feature handy.
Select [WB SHIFT/BKT].
1
Turn the <5> dial to select [z WB
SHIFT/BKT], then press <0>.
X The WB correction/WB bracketing
screen will appear.
White Balance Correction
2
Use <9> to move the “ ” to the
desired position on the screen.
B is blue, A is amber, M is magenta,
and G is green. The color in the
respective direction will be corrected.
The upper right of the “SHIFT” screen
Sample setting : A2, G1
will show the bias direction and
correction amount.
To cancel the white balance correction,
use < > to move the “ ” to the
center so that the “SHIFT” is “0, 0”.
9
Press <0> to exit the setting and
return to the menu.
During the white balance correction, <2> will be displayed in the
viewfinder and on the LCD panel.
One level of the blue/amber correction is equivalent to 5 mireds of a color
temperature conversion filter. (Mired: A measurement unit indicating the
density of a color temperature conversion filter.)
You can also set white balance bracketing and AEB shooting in
combination with white balance correction.
If you turn the <5> dial in step 2, WB bracketing will be set. (p.65)
Download from Www.Somanuals.com. All Manuals Search And Download.
64
3White Balance Auto BracketingN
With just one shot, three images having a different color tone can be
recorded simultaneously. Based on the white balance mode’s standard
color temperature, the image will be bracketed with a blue/amber bias
or magenta/green bias. This is called white balance bracketing. It can
be set up to ±3 levels in single-level increments.
Select [WB SHIFT/BKT].
1
Turn the <5> dial to select [z WB
SHIFT/BKT], then press <0>.
X The WB correction/WB bracketing
screen will appear.
Set the bracketing amount.
2
Turn the <5> dial to set the
bracketing direction and bracketing
level.
When you turn the <5> dial, “ ” on
the screen will change to “
” (3
B/A bias ±3 levels
points). Turning the <5> dial to the
right sets the B/A bracketing, and
turning it to the left sets the M/G
bracketing.
Set the bracketing level for the B/A or
M/G bias up to ±3 levels in single-
level increments. (The bracketing
level cannot be set for both the B/A
and M/G bias.)
M/G bias ±3 levels
X On the right side of the screen, “BKT”
indicates the bracketing direction and
the bracketing level is also displayed.
Press <0> to exit the setting and
return to the menu.
Download from Www.Somanuals.com. All Manuals Search And Download.
65
3 White Balance Auto BracketingN
Take the picture.
3
X
When B/A bracketing has been set, the
three images will be recorded onto the
CF card in the following sequence:
Standard WB, B (blue) bias, and A
(amber) bias. If M/G bracketing has
been set, the sequence will be
Standard WB, M (magenta) bias, and
G (green) bias.
Canceling White Balance Auto Bracketing
In step 2, set “BKT” to “±0” (“
” (1 point)).
” to
“
With white balance bracketing, the maximum burst will be lower.
When white balance bracketing is set, the white balance icon will blink on
the LCD panel and the remaining shots will decrease to about 1/3.
Since three images are recorded for one shot, the CF card will take
longer to record the shot.
You can also set white balance correction and AEB shooting in
combination with white balance bracketing. If you set AEB in
combination with white balance bracketing, a total of nine images will be
recorded for a single shot.
“BKT” stands for bracketing.
Download from Www.Somanuals.com. All Manuals Search And Download.
66
3Setting the Color SpaceN
The color space refers to the range of reproducible colors. With this
camera, you can set the color space for captured images to sRGB or
Adobe RGB. For normal images, sRGB is recommended. In the <1>
(Full Auto) mode, sRGB will be set automatically.
Select [Color space].
1
Turn the <5> dial to select [z
Color space], then press <0>.
Set the desired color space.
2
Turn the <5> dial to select [sRGB]
or [Adobe RGB], then press <0>.
About Adobe RGB
This is mainly used for commercial printing and other industrial uses.
This setting is not recommended if you do not know about image
processing, Adobe RGB, and Design rule for Camera File System 2.0
(Exif 2.21).
Since the image will look very subdued with sRGB personal computers
and printers not compatible with Design rule for Camera File System
2.0 (Exif 2.21), post-processing of the image with software will be
required.
If the image is captured with the color space set to Adobe RGB, the file
name will start with “_MG_” (first character is an underscore).
The ICC profile is not appended. The ICC profile is explained in the
Software Instruction Manual (PDF).
Download from Www.Somanuals.com. All Manuals Search And Download.
67
3Creating and Selecting a Folder
You can freely create and select the folder where the captured images
are to be saved. This is optional since a folder will be created
automatically for saving captured images.
Creating a Folder
Go to the Create folder screen.
1
Turn the <5> dial to select [c
Select folder], then press <0>.
X The Select/Create folder screen will
appear.
Select [Create folder].
2
Turn the <5> dial to select [Create
folder], then press <0>.
X The Create folder screen will appear.
Create a new folder.
3
Turn the <5> dial to select [OK],
then press <0>.
X A new folder will be created.
A folder can have up to 9999 images.
If the active folder reaches 9999 images, a new folder will be created
automatically to save images captured thereafter.
Up to 900 folders can be created.
Download from Www.Somanuals.com. All Manuals Search And Download.
68
3 Creating and Selecting a Folder
Selecting a Folder
With the Select/Create folder screen
displayed, turn the <5> dial to select
the desired folder, then press <0>.
X Captured images will be saved in the
selected folder.
“100EOS5D” is the folder No. and the
number on the right is the number of
images contained in the folder.
You cannot select a folder to playback the images inside.
Creating Folders with a Personal Computer
With the memory card open on the screen, create a new folder named
“Dcim.”
Open the Dcim folder and create as many folders as necessary to save and
organize your images.
The folder names must start with three digits from 100 to 999 followed by
five letters, like 100ABC_D. The five letters can be a combination of upper
or lower case letters from A to Z and an underscore. There can be no
spaces in the folder name. Also, if there are folder numbers with the same
three-digit number (regardless of the letters) such as “100ABC_C” and
“100ABC_D”, the camera will not recognize the folders.
Download from Www.Somanuals.com. All Manuals Search And Download.
69
3File Numbering Methods
The file number is like the frame number on a roll of film. It can start
counting in one of three different ways: [Continuous], [Auto reset], and
[Manual reset]. The images you take are automatically assigned a file
number from 0001 to 9999. The images are saved in the selected
folder.
Select [File numbering].
1
Turn the <5> dial to select [c File
numbering], then press <0>.
Select the file numbering method.
Turn the <5> dial to select
2
[Continuous], [Auto reset], or
[Manual reset], then press <0>.
Continuous
The file numbering continues in sequence even after you replace the
CF card. This prevents images from having the same file number, so
image management with a personal computer is easier. Note that if the
replacement CF card already contains images captured with the
camera, the file numbering will start after the highest file number in that
CF card or after the last captured image’s file number, whichever is
higher.
File numbering after
changing the CF card
CF card -1
CF card -2
XXX-0051
XXX-0052
Next sequential file number
Download from Www.Somanuals.com. All Manuals Search And Download.
70
3 File Numbering Methods
Auto Reset
Each time you replace the CF card, the file numbering will be reset to
the first file number (0001). Since the file number starts from 0001 in
each CF card, you can organize images according to CF card. Note that
if the replacement CF card already contains images, the file numbering
will start after the highest file number in that CF card.
File numbering after
changing the CF card
CF card -1
CF card -2
XXX-0051
XXX-0001
File number is reset
Manual Reset
This creates a new folder automatically and resets the file number to
0001. Images captured thereafter are saved in this new folder. The file
numbering method (Auto reset or Continuous) that was in effect before
the manual reset will continue to take effect.
If file No. 9999 is created, “FuLL” will be displayed on the LCD panel and in
the viewfinder. Replace the CF card with a new one.
For both JPEG and RAW images, the file name will start with “IMG_”. The
extension will be “.JPG” for JPEG images and “.CR2” for RAW images.
Download from Www.Somanuals.com. All Manuals Search And Download.
71
B Checking Camera Settings
When the camera is ready to shoot, press the <B> button to view
the current camera settings on the LCD monitor.
Display the camera settings.
Press the <B> button.
X The current camera settings appear
on the LCD monitor.
To turn off the LCD monitor, press the
<B> button again.
Camera Setting Display
Date/Time (p.40)
Picture Style (p.53)
Color space (p.67)
WB correction (p.64)/
WB bracketing (p.65)
Register camera settings (p.148)
Color temperature setting
(p.63)
ISO speed (p.60)
Auto rotate display (p.105)
Auto power off (p.39)
File number (p.70)
CF card remaining capacity
Folder number (p.68)
Flash exposure compensation (p.100)
For details on the image info. during playback, see “Shooting Information
Display” (p.108).
Download from Www.Somanuals.com. All Manuals Search And Download.
72
Setting the AF, Metering,
and Drive Modes
The viewfinder has 9 AF points. By
selecting a suitable AF point, you
can shoot with autofocus while
framing the subject as desired. You
can also set the AF mode to suit the
subject or obtain the desired effect.
Drive modes
Evaluative, partial, spot, and
center-weighted average metering
modes are provided. Single,
continuous, and Self-timer drive
modes are provided. Select the
metering mode that suits the
subject or your photographic
intention.
AF mode
Metering mode
The asterisk M appended on the right of the page title
indicates that the respective feature cannot be changed in
the <1> (Full Auto) mode.
The AF mode, AF point selection, metering mode, and drive
mode will be set automatically in the <1> (Full Auto)
mode.
Download from Www.Somanuals.com. All Manuals Search And Download.
73
f Selecting the AF ModeN
The AF mode is the autofocusing operation method. Three AF modes
are provided. One-Shot AF is suited for still subjects, while AI Servo AF
is for moving subjects. And AI Focus AF switches from One-Shot AF to
AI Servo AF automatically if the still subject starts moving. In the <1>
(Full Auto) mode, AI Focus AF will be set automatically.
On the lens, set the focus mode
switch to <AF>.
1
Set the Mode Dial to any setting
2 except <1> (Full Auto).
Press the <E> button. (9)
3
Select the AF mode.
4
While looking at the LCD panel, turn
the <6> dial.
X: One-Shot AF
9: AI Focus AF
Z: AI Servo AF
If an Extender (optional) is attached and the maximum aperture of the lens
is f/5.6 or smaller, AF will not be possible. For details, see the Extender’s
instructions.
<AF> stands for auto focus. <MF> stands for manual focus.
Download from Www.Somanuals.com. All Manuals Search And Download.
74
f Selecting the AF ModeN
One-Shot AF for Still Subjects
Pressing the shutter button
halfway activates the autofocus
and achieves focus once.
X
The AF point which achieves focus
flashes briefly. At the same time, the focus
confirmation light <o> in the viewfinder
is displayed.
AF point
Focus
confirmation
light
X
With evaluative metering, the exposure
setting (shutter speed and aperture) will
be set when focus is achieved. The
exposure setting and focus will be
locked as long as the shutter button is
pressed halfway. (p.79) You can then
recompose the shot while retaining the
exposure setting and point of focus.
If focus cannot be achieved, the focus confirmation light <o> in the
viewfinder will blink. If this occurs, a picture cannot be taken even if the
shutter button is pressed fully. Recompose the picture and try to focus
again. Or see “When Autofocus Fails (Manual Focusing)” (p.80).
AI Servo AF for Moving Subjects
While you press the shutter
button halfway, the camera
focuses continuously.
This AF mode is for moving subjects when
the focusing distance keeps changing.
With predictive AF*, the camera can also
focus track a subject which steadily
X
approaches or retreats from the camera.
X The exposure is set at the moment
the picture is taken.
Download from Www.Somanuals.com. All Manuals Search And Download.
75
f Selecting the AF ModeN
* About Predictive AF
If the subject approaches or retreats from the camera at a constant rate,
the camera tracks the subject and predicts the focusing distance
immediately before the picture is taken. This is for obtaining correct
focus at the moment of exposure.
When the AF point selection is automatic,
first the center AF point will focus the
subject. Within the spot metering circle,
there are six invisible Assist AF points (
in diagram) that function in the AI SERVO
AF mode. So even if the subject moves
slightly away from the center AF point, the
camera can still continue focusing. If the
subject moves completely away from the
center AF point during focusing, the
adjacent AF point will continue focusing
the subject as long as it covers the subject.
With a manually selected AF point,
the selected AF point will focus track
the subject.
AI Focus AF for Automatic Switching of AF Mode
AI Focus AF switches the AF mode from
One-Shot AF to AI Servo AF
automatically if the still subject starts
moving.
After the subject is focused in the One-
Shot AF mode, if the subject starts
moving, the camera will detect the
movement and change the AF mode
automatically to AI Servo AF.
When focus is achieved in the AI Focus AF mode with the Servo mode
active, the beeper will sound softly. The focus confirmation light <o> in the
viewfinder will not light.
Download from Www.Somanuals.com. All Manuals Search And Download.
76
SSelecting the AF PointN
The AF point is used for focusing. The AF point can be selected
automatically by the camera or manually by you.
In the <1> (Full Auto) mode, automatic selection will be set.
Automatic AF point selection
The camera selects the AF point automatically according to the
shooting conditions. All the AF points in the viewfinder will light in
red.
Manual AF Point Selection
You can select any of the nine AF points manually. This is best when
you want to focus on a particular subject, or autofocus quickly while
composing the shot.
Selecting with the Multi-controller
Press the <S> button. (9)
1
X The selected AF point will be
displayed in the viewfinder and on the
LCD panel.
Select the AF point.
2
While looking at the viewfinder or
LCD panel, use <9>.
The AF point in the direction where
you press the <9> will be selected.
If you press <9> straight down, the
center AF point will be selected.
If you push the <9> in the same
direction as the currently-selected AF
point, all the AF points will light and
automatic AF point selection will be
set.
Download from Www.Somanuals.com. All Manuals Search And Download.
77
SSelecting the AF PointN
Selecting with the Dial
Press the <S> button, then turn the
<6> dial or <5> dial to select the
AF point in the looping sequence
shown on the left.
When looking at the LCD panel to select the AF point, note the following:
Automatic selection
top
, center
, right
,
If focus cannot be achieved with an EOS-dedicated, external Speedlite’s
AF-assist beam, select the center AF point.
Lens’ Maximum Aperture and AF Sensitivity
The EOS 5D will execute high-precision AF with lenses whose
maximum aperture is f/2.8 or larger.
With lenses whose maximum aperture is f/2.8 or larger*
With the center AF point, high-precision, cross-type AF sensitive to both
vertical and horizontal lines is possible. With cross-type AF, vertical-line
detection is twice as sensitive as horizontal-line detection. The other
eight AF points are horizontal-line sensitive or vertical-line sensitive.
*
Except with the EF28-80mm f/2.8-4L USM and EF50mm f/2.5 Compact Macro lenses.
With lenses whose maximum aperture is larger than f/5.6
The center AF point is a cross-type AF sensor. The other eight AF
points are horizontal-line sensitive or vertical-line sensitive.
The spot metering circle has six invisible Assist AF
points (see left illustration) that function in the AI
SERVO AF mode. The
the same vertical-line sensitivity as the center AF
point at f/2.8, and the Assist AF points have
horizontal-line sensitivity at f/5.6.
Assist AF points have
Download from Www.Somanuals.com. All Manuals Search And Download.
78
Focusing an Off-Center Subject
After achieving focus, you can lock the focus on a subject and
recompose the shot. This is called “focus lock.” Focus lock works only
in the One-Shot AF mode.
Set the Mode Dial to any setting
except <1> (Full Auto).
1
2
3
Select the desired AF point.
Focus the subject.
Move the AF point over the subject
and press the shutter button halfway.
Keep pressing the shutter button
4 halfway and recompose the
picture as desired.
Take the picture.
5
If the AF mode is AI Servo AF (or AI Focus AF set to Servo mode), focus
lock will not work.
Download from Www.Somanuals.com. All Manuals Search And Download.
79
When Autofocus Fails (Manual Focusing)
Autofocus can fail to achieve focus (the focus confirmation light <o>
blinks) with certain subjects such as the following:
Subjects difficult to focus
(a) Low-contrast subjects
Example: Blue sky, solid-color walls, etc.
(b) Subjects in low light
(c) Extremely backlit and reflective subjects
Example: Car with a reflective body, etc.
(d) Overlapping near and far objects
Example: Animal in a cage, etc.
(e) Repetitive patterns
Example: Skyscraper windows, computer keyboards, etc.
In such cases, do one of the following:
(1) Focus an object at the same distance as the subject and lock the
focus before recomposing.
(2) Set the lens focus mode switch to <MF> and focus manually.
Manual Focusing
On the lens, set the focus mode
switch to <MF>.
1
2
Focus the subject.
Focus by turning the lens focusing
ring until the subject is in focus in the
Focusing ring
viewfinder.
If you press the shutter button halfway during manual focusing, the active
AF point and the focus confirmation light <o> in the viewfinder will light
when focus is achieved.
Download from Www.Somanuals.com. All Manuals Search And Download.
80
qSelecting the Metering ModeN
Four metering modes are provided: Evaluative, partial, spot, and
center-weighted average metering. In the <1> (Full Auto) mode,
evaluative metering is set automatically.
Press the <Q> button. (9)
1
Select the metering mode.
2
While looking at the LCD panel, turn
the <6> dial.
q: Evaluative Metering
w: Partial Metering
r: Spot Metering
e: Center-weighted Average
Metering
qEvaluative Metering
This is the camera’s standard metering mode suited for most
subjects even under backlit conditions. After detecting the
main subject’s position, brightness, background, front and
back lighting, etc., the camera sets the proper exposure.
wPartial Metering
Effective when the background is much brighter than the
subject due to backlighting, etc. Partial metering covers
about 8% of the viewfinder area at the center. The area
covered by partial metering is shown on the left.
rSpot Metering
This is for metering a specific part of the subject or scene.
The metering is weighted at the center covering about
3.5% of the viewfinder area. The area covered by spot
metering is shown on the left.
eCenter-weighted Average Metering
The metering is weighted at the center and then averaged
for the entire scene.
Download from Www.Somanuals.com. All Manuals Search And Download.
81
iSelecting the Drive ModeN
Single and continuous drive modes are provided. In the <1> (Full
Auto) mode, single shooting is set automatically.
Press the <R> button. (9)
1
Select the drive mode.
While looking at the LCD panel, turn
2
the <6> dial.
u : Single shooting
When you press the shutter
button completely, one shot will
be taken.
i : Continuous shooting (Max. 3
shots per sec.)
While you press the shutter
button completely, shots will be
taken continuously.
j : Self-timer Operation (p.48)
During continuous shooting, the captured images
are first stored in the camera’s internal memory and
then successively transferred to the CF card. When
the internal memory becomes full during continuous
Max. Burst
shooting, “buSY” will be displayed on the LCD panel and in the
viewfinder and the camera cannot take any more shots. As the captured
images are transferred to the CF card, you will be able to capture more
images. Press the shutter button halfway to check in the viewfinder’s
bottom right the current remaining shots of the maximum burst.
If “FuLL CF” is displayed in the viewfinder and on the LCD panel, wait
until the access lamp stops blinking, then replace the CF card.
When the battery level is low, the maximum burst will be slightly lower.
Download from Www.Somanuals.com. All Manuals Search And Download.
82
Advanced Operations
In shooting modes other than <1> (Full Auto), you
can freely set the shutter speed or aperture to obtain
the desired result.
The asterisk M appended on the right of the page title
indicates that the respective feature cannot be changed in
the <1> (Full Auto) mode.
After you press the shutter button halfway and let go, the
timer operation will keep the LCD panel and viewfinder
information displayed for about 4 sec. (0).
First set the <4> switch to <J>.
Download from Www.Somanuals.com. All Manuals Search And Download.
83
dProgram AE
Like <1> (Full Auto) mode, this is a
general-purpose shooting mode. The
camera automatically sets the shutter
speed and aperture value to suit the
subject’s brightness. This is called
Program AE.
* <d> stands for Program
* AE stands for Auto Exposure
Set the Mode Dial to <d>.
1
AF point
Focus the subject.
2
Look through the viewfinder and aim
any AF point over the subject. Then
press the shutter button halfway.
Shutter speed
Aperture
Check the display.
X The shutter speed and aperture value
will be set automatically and
3
displayed in the viewfinder and on the
LCD panel.
A correct exposure will be obtained
as long as the shutter speed and
aperture value display do not blink.
Take the picture.
Compose the shot and press the
4
shutter button completely.
Download from Www.Somanuals.com. All Manuals Search And Download.
84
dProgram AE
If “30"” and the maximum aperture blink, it indicates
underexposure. Increase the ISO speed or use flash.
If “8000” and the minimum aperture blink, it indicates
overexposure. Decrease the ISO speed or use an ND
filter (optional) to reduce the amount of light entering the
lens.
Differences Between <d> and <1> (Full Auto)
In both modes, the automatically-set shutter speed and aperture
combination are the same.
In the <d> mode, you can set or use the functions below, but not in the
<1> mode.
Shooting Settings
Flash Settings (EX-series Speedlite)
AF mode selection
AF point selection
Drive mode selection
ISO speed
Metering mode selection
Program Shift
Manual/stroboscopic flash
High-speed sync (FP flash)
FE lock
Flash ratio control
Flash exposure compensation
FEB
Exposure compensation
AEB
2nd-curtain sync
Modeling flash
AE lock with <A> button
Depth-of-field preview
Register camera settings
Clear registered camera set.
Clear all camera settings
Custom Function (C.Fn)
Clear all Custom Functions
Sensor cleaning
Image-Recording Settings
RAW and RAW+JPEG selection
Picture Style selection/customize/registration
White balance selection
Custom white balance selection
White balance correction
WB bracketing
Color temperature setting
Color space selection
About Program Shift
In Program AE mode, you can freely change the shutter speed and
aperture value combination (program) set by the camera while
maintaining the same exposure value. This is called program shift.
To do this, press the shutter button down halfway, then turn the <6>
dial until the desired shutter speed or aperture value is displayed.
Program shift is canceled automatically after the image is captured.
If you use a flash, you cannot use program shift.
Download from Www.Somanuals.com. All Manuals Search And Download.
85
sShutter-Priority AE
In this mode, you set the shutter speed and the camera automatically
sets the aperture value to suit the brightness of the subject. This is
called Shutter-Priority AE. A fast shutter speed can freeze the motion of
a fast-moving subject and a slow shutter speed can blur the subject to
give the impression of motion.
* <s> stands for Time value.
Fast shutter speed
Slow shutter speed
Set the Mode Dial to <s>.
1
Set the desired shutter speed.
While looking at the LCD panel, turn
the <6> dial.
2
It can be set in 1/3-stop increments.
Focus the subject.
Press the shutter button halfway.
3
X
The aperture value is set automatically.
Check the viewfinder display and shoot.
As long as the aperture value is not
4
blinking, the exposure will be correct.
Download from Www.Somanuals.com. All Manuals Search And Download.
86
sShutter-Priority AE
If the maximum aperture blinks, it indicates
underexposure. Turn the <6> dial to set a slower
shutter speed until the aperture value stops blinking.
If the minimum aperture blinks, it indicates
overexposure. Turn the <6> dial to set a faster shutter
speed until the aperture value stops blinking or lower
the ISO speed.
Shutter Speed Display
The shutter speeds from “8000” to “4” indicate the denominator of the
fractional shutter speed. For example, “125” indicates 1/125 sec. Also, “0"6”
indicates 0.6 sec. and “15"” is 15 sec.
Download from Www.Somanuals.com. All Manuals Search And Download.
87
fAperture-Priority AE
In this mode, you set the desired aperture and the camera sets the shutter speed
automatically to suit the subject brightness. This is called aperture-priority AE.
A larger aperture opening (smaller f/number) will result in a blurred background
ideal for portraits. This occurs because a lower f/number decreases the depth of
field (range of acceptable focus). On the other hand, a smaller aperture opening
(larger f/number) will make more of the foreground and background fall within
acceptable focus. A smaller aperture opening increases the depth of field.
* <f> stands for Aperture value.
With a large aperture opening
With a small aperture opening
Set the Mode Dial to <f>.
1
Set the desired aperture value.
While looking at the LCD panel, turn
the <6> dial.
2
It can be set in 1/3-stop increments.
Focus the subject.
3
Press the shutter button halfway.
X The shutter speed is set
automatically.
Check the viewfinder display and
4 shoot.
As long as the shutter speed is not
blinking, the exposure will be correct.
Download from Www.Somanuals.com. All Manuals Search And Download.
88
fAperture-Priority AE
If the “30"” shutter speed blinks, it indicates
underexposure. Turn the <6> dial to set a larger
aperture (smaller f/number) until the blinking stops or
set a higher ISO speed.
If the “8000” shutter speed blinks, it indicates
overexposure. Turn the <6> dial to set a smaller
aperture (larger f/number) until the blinking stops or set
a lower ISO speed.
Aperture Value Display
The larger the f/number, the smaller the aperture opening will be. The
aperture values displayed will differ depending on the lens. If no lens is
attached to the camera, “00” will be displayed for the aperture value.
Depth of Field Preview
N
Press the depth-of-field preview button to
stop down to the current aperture setting.
The diaphragm in the lens will be set to
the current aperture so you can check the
depth of field (range of acceptable focus)
through the viewfinder.
The exposure is locked (AE lock) while the Depth-of-Field Preview button is
pressed.
Download from Www.Somanuals.com. All Manuals Search And Download.
89
aManual Exposure
In this mode, you set both the shutter
speed and aperture value as desired. To
determine the exposure, refer to the
exposure level indicator in the viewfinder
or use a handheld exposure meter. This
method is called manual exposure.
* <a> stands for Manual.
Set the Mode Dial to <a>.
1
Set the desired shutter speed.
While looking at the LCD panel, turn
the <6> dial.
2
Set the desired aperture value.
3
Set the <4> switch to <J>, and
while looking at the LCD panel, turn
the <5> dial.
Focus the subject.
Standard exposure index
Exposure level mark
4
Press the shutter button halfway.
X The exposure setting will be
displayed in the viewfinder and on the
LCD panel.
The exposure level icon <s> lets you
see how far you are from the
standard exposure level.
Download from Www.Somanuals.com. All Manuals Search And Download.
90
aManual Exposure
Set the exposure.
5
Check the exposure level and set the
desired shutter speed and aperture
value.
: Standard exposure level.
: To set it to the standard
exposure level, set a slower
shutter speed or a larger
aperture.
: To set it to the standard
exposure level, set a faster
shutter speed or a smaller
aperture.
Take the picture.
6
If the exposure level mark <s> blinks at the <G> or <F> level, it indicates
that the exposure level exceeds the standard exposure by ±2 stops.
Download from Www.Somanuals.com. All Manuals Search And Download.
91
Setting Exposure CompensationN
Exposure compensation is used to alter the standard exposure setting set by the camera.
You can make the image look lighter (increased exposure) or darker (decreased
exposure). You can set the exposure compensation up to ±2 stops in 1/3-stop increments.
Set the Mode Dial to <d>, <s>,
or <f>.
1
2
Check the exposure level indicator.
Press the shutter button halfway and
check the exposure level indicator.
Set the exposure compensation amount.
3
Set the <4> switch to <J>, and
while looking at the viewfinder or LCD
panel, turn the <5> dial.
Turn the <
shutter button halfway or within (
after pressing the shutter button halfway.
To cancel the exposure compensation, set the
exposure compensation amount back to <
5> dial while pressing the
0
)
Increased exposure
Decreased exposure
E>.
Standard exposure index
Exposure level
mark
Increased
exposure
Decreased exposure
Take the picture.
4
The exposure compensation amount will remain in effect even after the
<4> switch is set to <2>.
If the standard exposure setting is 1/125 sec. and f/8.0, setting the
exposure compensation amount to plus or minus one stop will be the
same as setting the shutter speed or aperture value as follows:
-1 stop
250 ← 125 →
11 ← 8.0 →
←
0
→ +1 stop
Shutter speed
Aperture value
60
5.6
Take care not to turn the <
5> dial and change the exposure compensation
inadvertently. To prevent this, turn the <
4
> switch to < >.
1
Download from Www.Somanuals.com. All Manuals Search And Download.
92
3 Auto Exposure Bracketing (AEB)N
By changing the shutter speed or aperture automatically, the camera
brackets the exposure up to ±2 stops in 1/3-stop increments for three
successive shots. This is called Auto Exposure Bracketing (AEB).
Standard exposure
Decreased exposure
Increased exposure
Select [AEB].
Turn the <5> dial to select [z
AEB], then press <0>.
1
Set the AEB amount.
Turn the <5> dial to set the AEB
amount, then press <0>.
X When you exit the menu, <h> and
the AEB level will be displayed on the
LCD panel.
2
3
AEB amount
Standard exposure
Decreased exposure
Increased exposure
Take the picture.
X The three bracketed shots will be
exposed in the following sequence:
standard exposure, decreased
exposure, and increased exposure.
X As shown on the left, the respective
bracketing amount will be displayed
as each bracketed shot is taken.
X The current drive mode (p.82) will be
used for the shooting.
Download from Www.Somanuals.com. All Manuals Search And Download.
93
3 Auto Exposure Bracketing (AEB)N
Canceling AEB
Follow steps 1 and 2 to set the AEB
amount to < >.
It will also be canceled if you set the
<4> switch to <2>, change the
lens, attain flash ready, replace the
battery, or replace the CF card.
Neither flash nor bulb exposures can be used with AEB.
If the drive mode is set to continuous (i), the three bracketed shots will
be taken continuously and then the shooting will stop automatically. If the
drive mode is set to single image (u), you must press the shutter button
three times.
If the self-timer has been set, the three bracketed shots will be taken
continuously.
If C.Fn-12-1 is set for mirror lockup and AEB is set, only one bracketed
shot will be taken at a time even in the continuous shooting mode.
AEB can be combined with exposure compensation.
Download from Www.Somanuals.com. All Manuals Search And Download.
94
AAE LockN
AE lock enables you to lock the exposure at a different place from the
point of focus. After locking the exposure, you can recompose the shot
while maintaining the desired exposure setting. This is called AE lock. It
is effective for backlit subjects.
Focus the subject.
Press the shutter button halfway.
1
X
The exposure setting will be displayed.
Press the <A> button. (0)
2
X <A> lights in the viewfinder to
indicate that the exposure setting is
locked (AE lock).
Each time you press the <A> button,
it locks the current exposure setting.
AE lock indicator
Recompose and take the picture.
3
If you want to maintain the AE lock
while taking more shots, hold down
the <A> button and press the shutter
button to take another shot.
If One-Shot AF or AI Focus AF (when not AI Servo AF) is set, pressing
the shutter button halfway to focus will automatically set AE lock at the
same time.
The AE lock effect will differ depending on the AF point and metering
mode. For details, see “AE lock” (p.160).
Download from Www.Somanuals.com. All Manuals Search And Download.
95
Bulb Exposures
When bulb is set, the shutter stays open while you hold down the shutter
button fully, and closes when you let go of the shutter button. This is
called bulb exposure. Use bulb exposures for night scenes, fireworks, the
heavens, and other subjects requiring long exposures.
Set the Mode Dial to <k>.
1
Set the desired aperture value.
2
Look at the LCD panel and turn the
<6> dial.
Take the picture.
Press the shutter button completely.
X The elapsed exposure time will be
3
displayed on the LCD panel.
(Displays 1 sec. to 999 sec.)
Elapsed exposure time
The exposure continues as long as
you hold down the shutter button.
Since bulb exposures will have more noise than usual, the image will look
rough or grainy.
Bulb exposures may result in grainy images due to picture noise. If C.Fn-
02 [Long exp. noise reduction] is set to [1: Auto noise reduction] or
[2: On] (p.151), noise can be reduced.
For bulb exposures, using Remote Switch RS-80N3 or Timer Remote
Controller TC-80N3 (both optional) is recommended.
Download from Www.Somanuals.com. All Manuals Search And Download.
96
Mirror LockupN
Mirror lockup is enabled with C.Fn-12 [Mirror lockup] set to [1: Enable]
(p.154). The mirror can be swung up separately from when the
exposure is made. This prevents mirror vibrations which may blur the
image during close-ups or when a super telephoto lens is used. Set
Custom Functions with [c Custom Functions (C.Fn)].
Press the shutter button
completely.
X The mirror will swing up.
1
Again press the shutter button
2 completely.
X The picture is taken and the mirror
goes back down.
In very bright light such as at the beach or ski area on a sunny day, take
the picture promptly after mirror lockup.
During mirror lockup, do not point the camera lens at the sun. The sun’s
heat can scorch and damage the shutter curtains.
If you use bulb exposures, the self-timer, and mirror lockup in
combination, keep pressing the shutter button completely (2 sec. self-
timer + bulb exposure time). During the self-timer countdown, if you let
go of the shutter button, there will be a shutter-release sound. This is not
the shutter release (no picture is taken).
During mirror lockup, the drive mode will be single shooting regardless of
the current drive mode (single or continuous).
If you use the self-timer and mirror lockup, the shot will be taken 2 sec.
after the mirror goes up when you press the shutter button completely.
The mirror locks up, and after 30 seconds, it will go back down
automatically. Pressing the shutter button completely again locks up the
mirror again.
For mirror lockup shots, using Remote Switch RS-80N3 or Timer Remote
Controller TC-80N3 (both optional) is recommended.
Download from Www.Somanuals.com. All Manuals Search And Download.
97
ULCD Panel Illumination
The LCD panel is provided with
illumination.
Each time you press the <U> button,
the LCD panel illumination will turn on or
off. Use it to read the LCD panel in the
dark (9). The illumination will turn off
automatically after the shot is taken.
Pressing any shooting-related button or turning the Mode Dial while the
LCD panel is illuminated prolongs the illumination.
During a bulb exposure, pressing the shutter button completely will turn
off the LCD panel illumination. However, you can turn on the illumination
for 6 sec. by pressing the <U> button.
Using the Eyepiece Cover
During self-timer or remote switch (optional) operation when your eye
does not cover the viewfinder eyepiece, stray light may enter the
eyepiece and affect the exposure when the image is captured. In such a
case, use the eyepiece cover (p.21).
Remove the eyecup.
From the bottom of the eyecup, push
1
it upward.
Attaching the Eyepiece Cover.
2
Slide the eyepiece cover down into
the eyepiece groove to attach it.
Download from Www.Somanuals.com. All Manuals Search And Download.
98
3 You can also silence the beeper
You can silence the beeper so it does not sound in any shooting mode.
Select [Beep].
Turn the <5> dial to select [z
1
Beep], then press <0>.
Select [Off].
Turn the <5> dial to select [Off],
2
then press <0>.
3
CF Card Reminder
This prevents shooting if there is no CF card in the camera. This can be
set in all shooting modes.
Select [Shoot w/o card].
1
Turn the <5> dial to select [z
Shoot w/o card], then press <0>.
Select [Off].
Turn the <5> dial to select [Off],
2
then press <0>.
If [Off] has been set and you press the shutter button while there is no CF
card in the camera, “no CF” will be displayed in the viewfinder and LCD
panel.
Download from Www.Somanuals.com. All Manuals Search And Download.
99
Flash Photography
With EX-series Speedlites
An EOS-dedicated, EX-series Speedlite makes flash photography as
easy as any AE mode. For details on using the EX-series Speedlite,
refer to the Speedlite’s instruction manual. The EOS 5D is a Type-A
camera compatible with all EX-series Speedlites providing the features
below.
• E-TTL II Autoflash
E-TTL II incorporates an improved flash exposure control and lens focusing
distance information, making it more precise than the previous E-TTL autoflash
exposure system (evaluative flash metering with preflash). The camera can
execute E-TTL II autoflash with any EX-series Speedlite.
• High-Speed Sync (FP flash)
High-speed sync (FP or focal-plane flash) enables flash synchronization with all
shutter speeds from 30 sec. to 1/8000 sec.
• FE (Flash Exposure) Lock
Press the camera’s <A> button to lock the flash exposure at the desired part
of the subject. This is the flash equivalent of AE lock.
Aim the center of the viewfinder over the part of the subject where you want to
obtain a correct exposure, then press the <A> button. During FE lock, <d>
will be displayed in the viewfinder.
• Flash Exposure Compensation
In the same way as normal exposure compensation, you can set exposure
compensation for flash. The flash exposure compensation amount can be set
with the camera up to ±2 stops in 1/3-stop increments. With Speedlites which
you can set the flash exposure compensation, it can be set up to ±3 stops in
1/3-stop increments.
• FEB (Flash Exposure Bracketing)
FEB is the flash version of AEB. (Only with FEB-compatible Speedlites.) Set
flash exposure bracketing up to ±3 stops in 1/3-stop increments.
During FEB, <d> will blink in the viewfinder.
If you use flash, you can set flash exposure compensation by holding down
the <Q> button and turning the <5> dial.
Download from Www.Somanuals.com. All Manuals Search And Download.
100
Flash Photography
• E-TTL II Wireless Autoflash with Multiple Speedlites
Like with wired, multiple Speedlites, E-TTL II wireless autoflash with multiple
Speedlites provides all the above features. Since connection cords are
unnecessary, flexible and sophisticated lighting setups are possible. (Only with
wireless-compatible Speedlites.)
TTL and A-TTL Autoflash Speedlites
With TTL and A-TTL autoflash Speedlites (EZ-, E-, EG-, ML-, TL-
series) set in the TTL or A-TTL autoflash mode, the flash will be fired
only at full output. If you set the camera’s shooting mode to manual
or aperture-priority AE, you can adjust the aperture and fire the flash
at full output. Meanwhile, the Speedlite will remain in the TTL or A-
TTL autoflash mode.
When the 580EX or 550EX is set to C.Fn-03-1, the flash will always
be fired at full output even in the TTL autoflash mode.
Download from Www.Somanuals.com. All Manuals Search And Download.
101
Using Non-Canon Flash Units
Sync Speed
The EOS 5D can synchronize with compact, non-Canon flash units at 1/
200 sec. or slower shutter speeds. With large studio flash, the sync
speed is 1/125 sec. or slower. Be sure to test the flash to see if it
synchronizes properly with the camera.
PC Terminal
The camera’s PC terminal is provided for flash units having a sync
cord. The PC terminal is threaded to prevent inadvertent
disconnection.
The camera’s PC terminal has no polarity so you can connect any
sync cord regardless of its polarity.
If the camera is used with a flash unit (with dedicated flash contacts) or
flash accessory dedicated to another camera brand, the camera may not
operate properly and camera malfunction may result. Also, do not
connect to the camera’s PC terminal any flash unit requiring 250 V or
higher voltage.
Do not attach a high voltage flash unit on the camera’s hot shoe. It might
not work.
A Speedlite attached to the camera’s hot shoe and a flash unit connected to
the PC terminal can be used at the same time.
Download from Www.Somanuals.com. All Manuals Search And Download.
102
Image Playback
This chapter explains image playback operations such
as how to view and erase captured images and how to
connect the camera to a TV monitor.
For images taken with another camera:
The camera might not be able to properly display images
captured with a different camera or edited with a personal
computer or whose file name was changed.
Download from Www.Somanuals.com. All Manuals Search And Download.
103
3 Setting the Image Review Time
You can set how long the image is to be displayed on the LCD monitor
right after it is captured. To keep the image displayed, set [Hold]. To not
have the image displayed, set [Off].
Select [Review time].
1
Turn the <5> dial to select [x
Review time], then press <0>.
Set the desired review time.
2
Turn the <5> dial to select the
desired setting, then press <0>.
If you press the <B> button during the image review right after
shooting, you can change the display format.
The [Hold] setting keeps displaying the image until you press the shutter
button halfway. However, if auto power off has been set, the camera will
turn off automatically after the auto power off time elapses.
During the image review for single-shooting, you can delete the
displayed image by pressing the <L> button and selecting [OK].
To view images captured so far, see “Image Playback” (p.107).
Download from Www.Somanuals.com. All Manuals Search And Download.
104
3 Auto Image Rotation
Vertical shots can be rotated automatically so that they are displayed
upright during playback.
Select [Auto rotate].
Turn the <5> dial to select [c Auto
1
rotate], then press <0>.
Select [On].
Turn the <5> dial to select [On],
2
then press <0>.
Take a vertical shot.
For the image review right after image
3
capture, the image will not be
displayed vertically on the LCD
monitor.
Playback the image.
4
Press the <x> button.
X The vertical shot will be displayed
vertically as shown on the left.
Auto rotate will work only if [Auto rotate] has been set to [On]. Auto
rotate will not work with vertical images captured while [Auto rotate] was
[Off].
If the vertical image is taken while the camera is pointed up or down, the
image might not rotate automatically for playback.
When you change the camera’s orientation between horizontal and vertical,
the camera orientation sensor will make a small sound. This is normal and
not a defect.
Download from Www.Somanuals.com. All Manuals Search And Download.
105
3 Setting the LCD Brightness
You can adjust the brightness of the LCD monitor to one of five levels.
Select [LCD brightness].
1
Turn the <5> dial to select [c LCD
brightness], then press <0>.
X The brightness adjustment screen will
appear.
Adjust the brightness.
2
While looking at the gray chart on the
left, turn the <5> dial to adjust.
Press <0> to exit the setting and
return to the menu.
To check the image’s exposure, look at the histogram (p.109).
Download from Www.Somanuals.com. All Manuals Search And Download.
106
Image Playback
You can select any captured image to view. You can view a single
image, the shooting information, an index display, or a magnified view.
xSingle image display
Playback the image.
1
Press the <x> button.
X The last captured image will appear
on the LCD monitor.
Select the image.
To playback images starting with the
2
last image, turn the dial
counterclockwise. To playback
images starting with the first captured
image, turn the <5> dial clockwise.
Press the <B> button to switch
the display format.
Single image display
(with basic info)
Shooting information
Single image display
(no shooting info)
To quit the playback, press the <x>
button. The LCD monitor will turn off.
Even in display formats other than single image (index display, magnified view,
etc.), you can press the < > button to display or hide the basic info.
B
While data is being written to the CF card (access lamp blinking) after
continuous shooting, press the <x> button to display the last image
which has been written to the CF card. Turn the <5> dial to select the
image. After all the images have been written to the CF card, they can be
displayed in sequence.
Download from Www.Somanuals.com. All Manuals Search And Download.
107
Image Playback
Shooting Information Display
Image
Original image verification
data appended
File No.
Histogram
Color temperature
Color space
White balance
Flash exposure
compensation amount
Shooting time
WB correction
Shooting mode
Shooting date
Shutter speed
Playback image number/
Total images recorded
ISO speed
Aperture
Image protect
Metering mode
Monochrome
File size
Exposure compensation amount
Image-recording quality
Highlight Alert
When the shooting information is displayed, any overexposed areas of
the image will blink. To obtain more image detail in the overexposed
areas, set the exposure compensation to a negative amount and shoot
again.
3 AF Point Display
On the menu, if [x AF points] is set to [Display], the AF point will also
be displayed on the shooting information screen.
If the image was taken in the One-Shot AF mode, the AF point which
achieved focus will be displayed. If automatic AF point selection was
used, you may see multiple AF points which achieved focus.
If the image was captured in the AI SERVO AF mode, the AF point
which was selected will be displayed. If automatic AF point selection
was used, the AF points which achieved focus will be displayed.
If the image was taken in the AI SERVO AF mode with the center AF point
and C.Fn-17-01 (AF point activation area: Expanded) set, the center AF
point and Assist AF points (p.76) above and below it will also be displayed.
Download from Www.Somanuals.com. All Manuals Search And Download.
108
Image Playback
3 Histogram
On the menu’s [x Histogram] setting, you can select [Bright.] or
[RGB].
[Bright.] Display
Sample Histograms
This histogram is a graph showing the distribution of
the image’s brightness level. The horizontal axis
indicates the brightness level (darker on the left and
brighter on the right), while the vertical axis
indicates how many pixels exist for each brightness
level.
Dark image
The more pixels there are toward the left, the darker
the image. And the more pixels there are toward the
right, the brighter the image.
Normal image
If there are too many pixels on the left, the shadow
detail will be lost. And if there are too many pixels
on the right, the highlight detail will be lost. The
tones in-between will be reproduced.
Bright image
By checking the image’s brightness histogram, you can see the
exposure level bias and the overall tone reproduction condition.
[RGB] Display
This histogram is a graph showing the distribution of the image’s
brightness level of each primary color (RGB or red, blue, and green).
The horizontal axis indicates the color’s brightness level (darker on the
left and brighter on the right), while the vertical axis indicates how many
pixels exist for each color brightness level. The more pixels there are
toward the left, the darker and less prominent the color. And the more
pixels there are toward the right, the brighter and denser the color. If
there are too many pixels on the left, the respective color information
will be lacking. And if there are too many pixels on the right, the color
will be too saturated with no detail.
By checking the image’s RGB histogram, you can see the color’s
saturation and gradation condition and white balance bias.
Download from Www.Somanuals.com. All Manuals Search And Download.
109
Image Playback
H Index Display
Nine thumbnail images are displayed on one screen.
Set the camera for playback.
1
Press the <x> button.
X The last captured image will appear
on the LCD monitor.
Display the index images.
2
Press the <I> button.
X The selected thumbnail will be
highlighted with a green frame.
Select the image.
Turn the <5> dial to move the green
3
frame.
Switching from the index display to another display format
To display a single image, press the <x> button.
Pressing the <u> button switches to the single image display and
pressing it again switches to magnified view.
While the index is displayed, press the <C> button and turn the <5>
dial to jump nine images ahead or back. (p.114)
Download from Www.Somanuals.com. All Manuals Search And Download.
110
Image Playback
u/yMagnified View
You can magnify the image by 1.5x to 10x on the LCD monitor.
Display the image.
Display the image in the single-image
1
or image info. display mode.
Magnify the image.
2
Press the <u> button.
X First, the center of the image will be
magnified.
To increase the magnification, hold
down the <u> button.
Magnified area
Press the <I> button to reduce
the magnification. Hold down the
button to continue reducing the
magnification until it reaches the size
in step 1.
Scroll around the image.
3
Use <9> to scroll around the image
in any direction.
Repeat steps 2 and 3 to magnify
other areas of the image.
To exit the magnified display, press
the <x> button.
During the magnified view, you can turn the <6> or <5> dial to view
the next or previous image at the same magnification and scroll position.
With C.Fn-18-1 set, you can hold down the <l> button and press the
<u> or <I> button to magnify or reduce the image.
Download from Www.Somanuals.com. All Manuals Search And Download.
111
Image Playback
3 Automated Playback of Images (Auto playback)
You can playback the CF card’s images in an automatic slide show.
Each image will be displayed for about 3 sec.
Select [Auto play].
1
Turn the <5> dial to select [x
Auto play], then press <0>.
X The auto play screen will appear.
Start the auto play.
X After [Loading image...] is displayed
for a few seconds, auto play will start.
To pause the auto play, press <0>.
During pause, [ ] will be displayed
on the upper left of the image. Press
<0> again to resume the auto play.
2
Stop the auto play.
To stop the auto play and return to the
3
menu, press the <M> button.
During auto play, auto power off will not work.
The display time may vary depending on the image.
During auto play, you can press the <B> button to change the
display format.
During pause, you can turn the <5> dial to view another image.
Download from Www.Somanuals.com. All Manuals Search And Download.
112
Image Playback
3 Rotating an Image
You can rotate an image by 90° or 270° clockwise. Images will then be
displayed in the correct orientation during playback.
Select [Rotate].
Turn the <5> dial to select [x
1
Rotate], then press <0>.
X The Rotate screen will appear.
Rotate the image.
2
Turn the <5> dial to select the
image to be rotated, then press
<0>.
X Each time you press <0>, the image
will rotate clockwise.
To rotate another image, repeat step
Ð
2.
To stop rotating the image, press the
<M> button. The menu will
reappear.
If you have set [c Auto rotate] to [On] (p.105) before taking the vertical
shots, you need not rotate the image as described above.
You can rotate the image even after you change the display format to
shooting info display, magnified view, or index display after step 1.
Download from Www.Somanuals.com. All Manuals Search And Download.
113
CJump Display
During the single image, image with shooting information, index, or
magnified image display, you can jump forward or back to images
stored on the CF card.
Playback the image.
1
Go to the jump display.
2
Press the <C> button.
X The jump bar will appear at the
bottom of the screen.
Jump bar
Jump forward or back.
3
Turn the <5> dial.
To quit the image jump, press the
<C> button. The jump bar will
disappear.
Turn the <5> dial to view the next or
previous image.
Single Image and Information Display
During the single image and information display, you can use the Jump
feature (by 10 or 100 images, date, or folder).
At step 2 above, press the <C>
button, then press <0> and turn the
<5> dial.
X The Jump method indicated on the
Jump bar will change (p.115).
Press <0> to confirm the Jump
method.
Turn the <5> dial to jump according
to the selected jump method.
Download from Www.Somanuals.com. All Manuals Search And Download.
114
CJump Display
Jumping during the single image or image with shooting
information display
Jump 10 images / Jump 100 images
Turn the <5> dial clockwise to jump forward by 10 or 100 images.
Or turn it counterclockwise to jump backward by 10 or 100 images.
Jump shot date
You can jump to a picture taken on a specific date. (If there are
multiple pictures taken on the same date, the display will jump to
the first picture taken on that date.) Turn the <5> dial to jump to
the previous or next date.
Jump folder
Jump by folder. Turn the <5> dial to jump to the previous or next
folder. The folder’s first image will be displayed.
Jumping in the magnified view
Turn the <5> dial counterclockwise to jump ten images backward,
or turn it clockwise to jump ten images forward. The magnified
position and magnification will be maintained during the image jump.
Jumping in the index display mode
Turn the <5> dial counterclockwise to jump to the previous 9th
image or turn it clockwise to jump to the next 9th image.
Image jump is also possible during [Protect], [Rotate] and [Custom WB].
Download from Www.Somanuals.com. All Manuals Search And Download.
115
Viewing the Images on a TV
By connecting the camera to a TV set with the video cable (provided),
you can view the captured images on a TV set. Always turn off the
camera and the television before connecting or disconnecting them.
Connect the camera to the TV.
1
Open the camera’s terminal cover.
Use the video cable (provided) to
connect the camera’s <q> terminal
to the TV monitor’s VIDEO IN
terminal.
Insert the cable plug all the way in.
Turn on the TV and switch the
2 TV’s line input to Video IN.
Video IN terminal
Set the <4> switch to <1> or
3 <J>.
Press the <x> button.
X The image will appear on the TV
4
screen. (Nothing will be displayed on
the camera’s LCD monitor.)
After you finish, set the <4> switch
to <2>, turn the TV off, then
disconnect the video cable.
If the proper video system format is not set, the image will not be
displayed properly. Set the proper video system format with [c Video
system].
Depending on the TV monitor, the four corners might look dark.
Download from Www.Somanuals.com. All Manuals Search And Download.
116
3 Protecting Images
This prevents the image from being erased accidentally.
Select [Protect].
Turn the <5> dial to select [x
Protect], then press <0>.
X The protect setting screen will
appear.
1
Protect the image.
2
Turn the <5> dial to select the
image to be protected, then press
<0>.
X When an image is protected, the
<K> icon will appear below the
image.
Image protect icon
To cancel the image protection, press
<0> again. The <K> icon will
disappear.
To protect another image, repeat step
2.
To exit the image protection, press
the <M> button. The menu will
reappear.
Once an image is protected, it cannot be erased by the camera’s Erase
function. To erase a protected image, you must first cancel the
protection.
If you erase all the images (p.119), only the protected images will remain.
This is convenient when you want to erase unnecessary images all at
once.
You can protect the image even after you change the display format to
shooting info display, magnified view, or index display after step 1.
Download from Www.Somanuals.com. All Manuals Search And Download.
117
LErasing Images
You can erase images individually or erase all the images at one time in
the CF card. Only protected images will not be erased.
Once an image is erased, it cannot be recovered. Make sure
you no longer need the image before erasing it. To prevent
important images from being erased accidentally, protect
them.
Erasing a Single Image
Display the image.
1
Press the <x> button.
Select the image to be erased.
2
Turn the <5> dial to select the
image to be erased.
Display the erase menu.
3
Press the <L> button.
X The Erase menu will appear at the
bottom of the screen.
Erase the image.
Turn the <5> dial to select [Erase],
4
then press <0>.
X The access lamp will blink and the
image will be erased.
If there are other images you want to
erase, repeat steps 2 to 4.
Download from Www.Somanuals.com. All Manuals Search And Download.
118
LErasing Images
Erasing All Images
Display the image.
Press the <x> button.
1
2
Display the erase menu.
Press the <L> button.
X The Erase menu will appear at the
bottom of the screen.
Select [All].
Turn the <5> dial to select [All],
then press <0>.
3
X The confirmation dialog will appear.
Erase the images.
Turn the <5> dial to select [OK],
then press <0>.
4
X All unprotected images will be
erased.
While the images are being erased,
you can cancel the erasure by
pressing <0>.
While data is being written to the CF card (access lamp blinking) after
continuous shooting, press the <x> button and then press the <L> button
to erase the displayed image or all images. If you select [All] and press the
<0> button, the images captured during continuous shooting (including
those not yet processed) and all the images on the CF card will be erased.
Download from Www.Somanuals.com. All Manuals Search And Download.
119
3 Formatting the CF Card
Format the CF card before using it in the camera.
Formatting a CF card will erase everything in the card. Even
protected images will be erased, so make sure there is
nothing you need to keep. If necessary, transfer images to a
personal computer before formatting the card.
Select [Format].
Turn the <5> dial to select [c
1
Format], then press <0>.
X The confirmation dialog will appear.
Format the CF card.
2
Turn the <5> dial to select [OK],
then press <0>.
X The CF card will be formatted
(initialized).
X When the formatting is completed,
the menu will reappear.
A non-Canon CF card or a CF card formatted with another camera or
personal computer might not work with the camera. If this happens,
format the card with the camera first. Then it might work with the camera.
The CF card’s capacity displayed on the formatting screen may be lower
than the capacity indicated on the card.
Handling “Err CF”
If “Err CF” (CF error) is displayed on the LCD panel, it indicates that a
problem with the CF card is preventing the image data from being recorded
or read. Use another CF card instead.
Or, if you have a commercially-available CF card reader that can read the
CF card, use it to transfer all the images in the card to a personal computer.
After transferring all the images to a personal computer, format the CF card.
It may then return to normal.
Download from Www.Somanuals.com. All Manuals Search And Download.
120
Direct Printing
from the Camera
You can connect the camera directly to a printer and
print out the images in the CF card.
The camera enables direct printing with printers
compatible with “<w> PictBridge”, Canon “<A> CP
Direct”, and Canon “<S> Bubble Jet Direct.”
Download from Www.Somanuals.com. All Manuals Search And Download.
121
Conventions Used in this Chapter
This chapter includes procedures for various types of printers. After
“Preparing to Print” on the next page, follow the instructions applicable
to your printer on the pages indicated.
Non-Canon
printer
Canon CP printer
Canon PIXMA/DS/BJ printer
Compatible
Compatible with
Compatible
with PictBridge
Bubble Jet Direct only
with PictBridge
wPictBridge
or
ACP Direct
SBubble Jet
wPictBridge
wPictBridge
Direct
Preparing to Print : Page 123 - 125
Page 126 - 129 Page 133 - 135
w
A
Page 126 - 129
Page 130 - 132
Page 126 - 129
Canon’s PictBridge Web Site
The Web site below gives more information about using your Canon
camera with various printers such as which paper types to use.
http://canon.com/pictbridge/
Download from Www.Somanuals.com. All Manuals Search And Download.
122
Preparing to Print
You do the direct printing procedure entirely through your
camera’s LCD monitor.
Setting the Camera
Select [Communication].
1
Turn the <5> dial to select [c
Communication], then press <0>.
Select [Print/PTP].
2
Turn the <5> dial to select [Print/
PTP], then press <0>.
When connecting the camera to the personal computer, set
[Communication] to [PC connect.]. Transmissions between the camera
and personal computer will not work with the [Print/PTP] setting.
For direct printing, using AC Adapter Kit ACK-E2 (optional) to power the
camera is recommended.
Connect the camera to the printer
Turn the camera’s <4> switch to
<2>.
1
Set up the printer.
2
For details, refer to the printer’s
manual.
Download from Www.Somanuals.com. All Manuals Search And Download.
123
Preparing to Print
Connect the camera to the
3 printer.
Refer to the table (Printers and
Cables) below to select the proper
cable to connect the camera to
printer.
Printers and Cables
Printer Compatibility
Suitable Cable
PictBridge only
w
w
A
PictBridge and
CP Direct
Interface cable provided with camera
The plug at both ends have the <D>
icon.
w
S
PictBridge and
Bubble Jet Direct
CP Direct only
A
Cable provided with printer
Only one plug has the <D> icon.
Bubble Jet Direct only
S
When connecting the cable plug to
the camera’s <C> terminal,
the cable plug’s <D> icon must face
the front side of the camera.
To connect to the printer, refer to the
printer’s instruction manual.
Turn on the printer.
4
Turn the camera’s <4> switch to
5 <1> or <J>.
X Some printers may have a beeping
sound.
Download from Www.Somanuals.com. All Manuals Search And Download.
124
Preparing to Print
Playback the image.
Press the <x> button.
X The image and the printer icon <w>,
<A>, or <S> indicating a printer
connection will be displayed.
X The <l> button lamp will light in
blue.
wPictBridge
ACP Direct
6
The procedure will be different
depending on the icon displayed. See
the applicable pages below.
SBubble Jet Direct
Icon
Reference pages
126 - 129, 138
w
130 - 132, 138
133 - 135, 138
A
S
RAW images are not compatible with direct printing.
If you use a battery to power the camera, make sure it is fully charged.
During direct printing, keep checking the battery level.
If there is a long beeping sound in step 5, it indicates a problem with the
PictBridge printer. To find out what’s wrong, do the following:
Press the <x> button to playback the image and follow the steps
below.
1. Press <0>.
2. On the print setting screen, select [Print].
The error message will be displayed on the LCD monitor. See “Error
Messages” on page 129.
Before disconnecting the cable, turn off the camera and printer. Pull out
the cable while holding the plug, not the cord.
When connecting the camera to the printer, do not use any cable other
than the dedicated interface cable.
Do not disconnect the cable during direct printing.
Download from Www.Somanuals.com. All Manuals Search And Download.
125
wPrinting with PictBridge
The setting options will differ depending on the printer. Some
settings might be disabled. For details, refer to your printer’s instruction
manual.
Printer connected icon
Select the image to be printed.
Check that the <w> icon is
1
displayed on the upper left of the LCD
monitor.
Turn the <5> dial to select the
image to be printed.
Press <0>.
X The print setting screen will appear.
2
Print setting screen
Set the date or file number imprinting to on
or off.
Set the printing effects.
Sets the quantity to be printed.
Sets the trimming area.
Sets the paper size, type, and layout.
Returns to the screen in step 1.
Starts the printing.
The paper size, type, and layout you have set will be displayed.
* Depending on the type of printer, the date and file number imprinting,
trimming, and other settings might not be available.
Select [Paper settings].
3
Turn the <5> dial to select [Paper
settings], then press <0>.
X The Paper settings screen will
appear.
Download from Www.Somanuals.com. All Manuals Search And Download.
126
wPrinting with PictBridge
Setting the Paper Size
Turn the <5> dial to select the size
of the paper loaded in the printer,
then press <0>.
X The Paper Type screen will appear.
YSetting the Paper Type
Turn the <5> dial to select the type
of paper loaded in the printer, then
press <0>.
X The Layout screen will appear.
About the Paper Types
If you are using a Canon PIXMA/DS/BJ printer with Canon paper, set
the respective paper type as follows:
Photo Paper Plus Glossy
Photo Paper Pro
Photo
Fast Photo
Default
Photo Paper Plus Glossy
If you are using a non-Canon printer, refer to the printer’s instruction
manual.
USetting the Layout
Turn the <5> dial to select the
desired layout, then press <0>.
X The Print setting screen will reappear.
Download from Www.Somanuals.com. All Manuals Search And Download.
127
wPrinting with PictBridge
About Layout
The print will have no white borders.
If your printer cannot print borderless prints, the print will have borders.
Borderless
Bordered
Bordered
**-up
The print will have a white border along the edges.
The shooting data will be imprinted on the border on 9x13cm and
larger prints.
Option to print 2, 4, 8, 9, 16, or 20 copies of same image on one sheet.
On A4 / Letter size paper, 20 or 35 thumbnails of the images
ordered through DPOF will be printed.
[20-up ] will have the shooting information* printed on the side of
the thumbnail images.
20-up
35-up
Default
With a Canon printer, the print will be borderless.
* From the Exif data, the camera name, lens name, shooting mode, shutter speed,
aperture, exposure compensation amount, ISO speed, etc., will be imprinted.
Set the other options.
If necessary, you can also set the
Date/File number imprinting
4
<
> date/file number imprinting,
<E> printing effects, and <R>
number of copies.
Turn the <5> dial to select the menu
item, then press <0>.
EPrinting effects
Turn the <5> dial to select the
desired setting, then press <0>.
Depending on the BJ printer, the
<E> Printing effects setting may
enable you to select the [Vivid] (for
vivid greens and blue sky), [NR]
(noise reduction), [Vivid+NR], [Face]
(compensate for a dark face caused
by backlighting) or [On] setting.
For details on trimming, see page
136.
RNumber of copies
Download from Www.Somanuals.com. All Manuals Search And Download.
128
wPrinting with PictBridge
Start printing.
Turn the <5> dial to select [Print],
then press <0>.
5
X The printing will start.
When the printing ends, the screen
will return to step 1.
To stop the printing, press <0> while
[Stop] is displayed, then turn the
<5> dial to select [OK] and press
<0>.
Depending on the image’s file size and recording quality, it may take
some time for the printing to start after you select [Print].
The [Default] setting for printing effects and other options are the
printer’s own default settings as set by the printer’s manufacturer. See
the printer’s instruction manual to find out what the [Default] settings are.
Handling Printer Errors
If you resolve a printer error (no ink, no paper, etc.) and select [Continue] to
resume printing but it does not resume, operate the buttons on the printer to
resume printing. For details, see the printer’s instruction manual.
Error Messages
If a problem occurs during printing, an error message will appear on the
camera’s LCD monitor. Press <0> to stop printing. After resolving the
problem, resume printing. For details on how to resolve a printing problem,
refer to the printer’s instruction manual.
Paper Error
Check whether the paper is properly loaded in the printer.
Ink Error
The printer has run out of ink or the waste ink tank is full.
Hardware Error
Check for any printer problems other than paper and ink problems.
File Error
The selected image cannot be printed via PictBridge. Images taken with
a different camera or images edited with a computer might not be
printable.
Download from Www.Somanuals.com. All Manuals Search And Download.
129
APrinting with CP Direct
Printer connected icon
Select the image to be printed.
1
Check that the <A> icon is displayed
on the upper left of the LCD monitor.
Turn the <5> dial to select the
image to be printed.
Press <
0>.
2
X The print setting screen will appear.
Print setting screen
Sets the quantity to be printed.
Sets the trimming area.
Sets the printing style.
Returns to step 1.
Starts the printing.
The printing style settings are displayed.
<H> is the date icon.
Select [Style].
Turn the <5> dial to select [Style],
then press <0>.
3
X The Style screen will appear.
Download from Www.Somanuals.com. All Manuals Search And Download.
130
APrinting with CP Direct
Set the options as desired.
Set the [Image], [Borders], and
[Date] as desired.
[Image]
[Borders]
[Date]
4
Turn the <5> dial to select the menu
item, then press <0>.
Turn the <5> dial to select the
desired setting, then press <0>.
[Image] is selectable when card-size
paper is used. If you select [Multiple],
8 small images of the same picture
will be printed on the paper.
Check the [Borders] and [Date]
settings and set them if necessary.
When you are done, press the
<M> button to return to the print
setting screen.
Set the number of copies.
Set as necessary.
Turn the <5> dial to select [copies],
then press <0>.
5
Turn the <5> dial to set the number
of copies, then press <0>.
Set a number from 1 to 99.
Download from Www.Somanuals.com. All Manuals Search And Download.
131
APrinting with CP Direct
Set the trimming.
6
7
Set as necessary.
For details on trimming, see page
136.
Start printing.
Turn the <5> dial to select [Print],
then press <0>.
X The printing will start.
When the printing ends, the screen
will return to step 1.
To stop the printing, press <0> while
[Stop] is displayed, then turn the
<5> dial to select [OK] and press
<0>.
The date may look light if it is imprinted on a bright background or border.
If [Multiple] is selected, [Borders] and [Date] cannot be selected.
[Borderless] will be set and [Date] will be set to [Off]. The image will
also be cut off along all four edges.
If [Date] is [On], the date recorded for the image will appear on the print.
The date will appear on the lower right of the image.
If you select [Stop] while printing only one picture, the printing will not
stop until it finishes printing the picture. If you are printing multiple
pictures, the printing will stop after the current picture is finished printing.
If a problem occurs during printing, an error message will appear on the
camera’s LCD monitor. Select [Stop] or [Continue] (after resolving the
problem). If [Continue] is not displayed, select [Stop].
Download from Www.Somanuals.com. All Manuals Search And Download.
132
SPrinting with Bubble Jet Direct
Printer connected icon
Select the image to be printed.
1
Check that the <S> icon is displayed
on the upper left of the LCD monitor.
Turn the <5> dial to select the
image to be printed.
Press <0>.
X The print setting screen will appear.
2
Print setting screen
Sets the quantity to be printed.
Sets the trimming area.
Sets the printing style.
Returns to step 1.
Starts the printing.
The printing style settings are displayed.
<H> is the date icon.
Select [Style].
Turn the <5> dial to select [Style],
then press <0>.
3
X The Style screen will appear.
Download from Www.Somanuals.com. All Manuals Search And Download.
133
SPrinting with Bubble Jet Direct
[Paper]
Set the options as desired.
Turn the <5> dial to select the menu
item, then press <0>.
4
Turn the <5> dial to select the
desired setting, then press <0>.
[Paper] is the size of the paper
loaded in the printer.
Check the [Borders] and [Date]
settings and set them if necessary.
When you are done, press the
<M> button to return to the print
setting screen.
[Borders]
[Date]
Set the number of copies.
Set as necessary.
Turn the <5> dial to select [copies],
then press <0>.
5
Turn the <5> dial to set the number
of copies, then press <0>.
Set a number from 1 to 99.
Set the trimming.
6
Set as necessary.
For details on trimming, see page
136.
Download from Www.Somanuals.com. All Manuals Search And Download.
134
SPrinting with Bubble Jet Direct
Start printing.
Turn the <5> dial to select [Print],
then press <0>.
7
X The printing will start.
When the printing ends, the screen
will return to step 1.
To stop the printing, press <0> while
[Stop] is displayed, then turn the
<5> dial to select [OK] and press
<0>.
If [Bordered] is set, the date might be imprinted on the border, depending
on the printer.
If [Date] is [On], the date recorded for the image will appear on the print.
The date will appear on the lower right of the image.
If you select [Stop] during the printing, the picture being printed will stop
printing and the paper will be discharged.
If a problem occurs during printing, an error message will appear on the
camera’s LCD monitor. Select [Stop] or [Continue]. If you select
[Continue] and the printer does not resume printing, it will resume
automatically after you resolve the problem.
If you are using a BJ printer equipped with an operation display panel,
the error No. will be displayed if an error occurs. To resolve the
respective error, refer to the BJ printer’s instruction manual.
Download from Www.Somanuals.com. All Manuals Search And Download.
135
Setting the Trimming
You can trim the image and print only the trimmed portion as if the
image was recomposed.
Do the trimming right before printing. If you set the trimming and
then set the print settings, you may have to set the trimming again.
Select [Trimming].
1
Turn the <5> dial to select
[Trimming], then press <0>.
X The trimming screen will appear.
Trim the image.
The image area within the trimming
2
frame will be printed.
The operation guide disappears while
you trim the image. It will reappear
after 5 sec. of idle time.
Changing the trimming frame size
When you press the <u> or
<I> button, the size of the
trimming frame will change. The
smaller the trimming frame, the larger
the image magnification will be.
Moving the trimming frame
Use <9> to scroll around the image
in any direction. Move the trimming
frame until it shows the desired image
area or composition.
Rotating the frame
The <B> button toggles
between the vertical and horizontal
orientation of the trimming frame. For
example, a horizontal shot can be
printed as a vertical shot.
Download from Www.Somanuals.com. All Manuals Search And Download.
136
Setting the Trimming
Image area to be printed
Exit the menu.
Press <0>.
X The Print setting screen will reappear.
X On the upper left, you can see the
trimmed image area that will be
printed.
3
Depending on the printer, the trimmed image area might not be printed
as you specified.
The smaller you make the trimming frame, the grainier the picture will
look. If the picture will be too grainy, the trimming frame will turn red.
While trimming the image, look at the camera’s LCD monitor. If you look
at the image on a TV screen, the trimming frame might not be displayed
accurately.
The trimming frame shape will be different depending on the [Paper
settings], [Image] / [Paper], [Page layout] / [Borders] settings.
Download from Www.Somanuals.com. All Manuals Search And Download.
137
Easy Printing
When you print directly from your camera to your printer, the printing
settings will be saved in your camera. To use the same settings again,
follow the steps below.
Connect the camera to a printer
and prepare for printing.
1
Playback the images and select
2 the ones to be printed.
Press the <l> button that lights
3 in blue.
X The blue lamp will blink and printing
will start.
With Easy Printing, only one print can be printed each time.
With Easy Printing, any cropping (trimming) will not be applied.
With C.Fn-18-1, printing will not be possible with the <l> button.
Download from Www.Somanuals.com. All Manuals Search And Download.
138
DPOF: Digital Print
Order Format
With DPOF (Digital Print Order Format), you can use
the camera to specify which images in the CF card are
to be printed and the quantity. This feature is very
convenient when you make prints with a DPOF-
compatible printer or photo lab.
About DPOF
DPOF (Digital Print Order Format) is a standard for recording
print ordering instructions to the CF card. It is for images taken
with a digital camera, and you can specify which photos and
the quantity to print. With a DPOF-compatible digital camera,
you can do the following:
By inserting a CF card into a DPOF-compatible
printer, you can make prints as specified.
Printers capable of direct printing from
the camera can print the images as
specified by DPOF.
When ordering prints from a photo
lab, you do not need to fill in any
order form to specify the image
selections, quantity, etc.
Download from Www.Somanuals.com. All Manuals Search And Download.
139
3 Print Ordering
Print Settings
Set the print type, date imprinting, and file No. imprinting. The print
settings will be applied to all print-ordered images. (They cannot be set
individually for each image.)
Select [Print order].
1
Turn the <5> dial to select [x
Print order], then press <0>.
X The Print Order screen will appear.
Select [Set up].
Turn the <5> dial to select [Set up],
2
then press <0>.
X The print setting screen will appear.
Set the options as desired.
3
Set the [Print type], [Date], and [File
No.].
Turn the <5> dial to select the menu
item, then press <0>.
Turn the <5> dial to select the
desired setting, then press <0>.
[Print type]
[Date]
[File No.]
Download from Www.Somanuals.com. All Manuals Search And Download.
140
3 Print Ordering
Standard
Index
Prints one image on one sheet.
K
L
Multiple, thumbnail images are printed on
one sheet.
Print type
K
L
Both
Prints both the standard and index prints.
On
Date
[On] imprints the recorded date on the print.
[On] imprints the file No. on the print.
Off
On
Off
File No.
Exit the menu.
4
Press the <M> button.
X The Print Order screen will reappear.
Next, select [Order] or [All] to select
the images to be printed.
RAW images cannot be selected for printing.
Even if [Date] and [File No.] are set to [On], the date or file No. might not
be imprinted depending on the print type setting and printer type.
With [Index] prints, both the [Date] and [File No.] cannot be set to [On]
at the same time.
When printing with DPOF, you must use the CF card whose Print Order
specifications have been set. It will not work if you just extract images
from the CF card and try to print them.
Certain DPOF-compatible printers and photo labs might not be able to
print the photos as you specified. If this happens with your printer, refer
to the printer’s instruction manual. Or check with your photo lab about
compatibility when ordering prints.
Do not insert into the camera a CF card containing images captured by a
different camera and then try to order prints. The images specified for the
print order might be inadvertently overwritten. Also, depending on the
image type, the print order may not be possible.
Download from Www.Somanuals.com. All Manuals Search And Download.
141
3 Print Ordering
Selecting Individual Images for Printing
Select [Order].
Turn the <5> dial to select [Order],
1
then press <0>.
X The order screen will appear.
Select the image to be printed.
Turn the <5> dial to select the
image to be printed.
Press the <I> button to see a
three-image view. To return to the
single-image view, press the <u>
button.
2
3
Three-image view
Order the print.
The print order will vary depending on
the [Print type] (p.140) setting.
For [Standard] and [Both]
For standard-type prints, you can set
the quantity (up to 99) for each
image.
Press <0>, then turn the <5> dial
to select the print quantity. Then
press <0>.
Download from Www.Somanuals.com. All Manuals Search And Download.
142
3 Print Ordering
For [Index]
If you want to include the image in the
index print, checkmark <X> the box.
Otherwise, leave the box unchecked.
Press <0> to checkmark the box
<X>, or press <0> again to remove
the checkmark.
If there are other images you want to
select, repeat steps 2 and 3.
You can select up to 998 images.
Exit the menu.
Press the <M> button.
X The Print Order screen will reappear.
Press the <M> button again to
save the print order to the CF card.
The menu will then reappear.
4
Download from Www.Somanuals.com. All Manuals Search And Download.
143
3 Print Ordering
Selecting All images
The print order can also be set or canceled for all the images in the CF
card. For standard-type prints, a quantity of one will be ordered for all
the images.
Note that after following the “Selecting Individual Images” procedure, if
you do the “Selecting All Images” procedure, the print order will change
to “All images.”
Select [All].
Turn the <5> dial to select [All],
1
then press <0>.
X The All screen will appear.
Select [Mark all].
Turn the <5> dial to select [Mark
2
all], then press <0>.
X One print each will be specified for all
the images, then the print order
screen will reappear.
If you select [Clear all], all the images
selected for printing will be deselected.
If you select [Cancel], the print order
screen will reappear.
Exit the menu.
On the Print Order screen, press the
<M> button.
3
X The settings will be saved to the CF
card, and the menu will reappear.
Note that RAW images cannot be selected for printing even when you
set “Mark all.”
When using a PictBridge printer, print no more than 500 images for one print
order. If you specify more than this, all the selected images might not be printed.
Download from Www.Somanuals.com. All Manuals Search And Download.
144
3 Direct Printing with DPOF
With a printer compatible with direct printing, you can easily print
images specified with DPOF.
Prepare to print.
See “Setting the Camera” (steps 1
1
and 2) and “Connect the camera to
the printer” (steps 1 to 5) on pages
123 to 124.
Select [Print order].
2
Turn the <5> dial to select [x
Print order], then press <0>.
X The Print Order screen will appear.
Select [Print].
Turn the <5> dial to select [Print],
3
then press <0>.
[Print] will be displayed only if the
camera is connected to the printer
and printing is possible.
X The print setting screen will appear.
Set the printing options.
4
wPictBridge
ACP Direct
SBubble Jet Direct
wPictBridge
Set the [Paper settings] and <E>
printing effects. (p.126)
Download from Www.Somanuals.com. All Manuals Search And Download.
145
3 Direct Printing with DPOF
ACP Direct / SBubble Jet Direct
Set the [Style]. (p.130/133)
Start printing.
Turn the <5> dial to select [OK],
then press <0>.
5
X The printing will start.
To stop the printing, press <0> while
[Stop] is displayed, then turn the
<5> dial to select [OK] and press
<0>.
When printing with a PictBridge or Bubble Jet Direct printer, be sure to
set the paper size.
With PictBridge, the file No. cannot be imprinted depending on the printer.
If [Bordered] is set, the date might be imprinted on the border,
depending on the printer.
The date might look light if it is imprinted on a bright background or border.
With CP Direct, if [Print type] is set to [Index], the number of images
printed on one index sheet will be as follows:
• Credit card size: 20 images
• 10 x 14.8 cm size: 63 images
• 9 x 13 cm size: 42 images
As for the number of index images with Bubble Jet Direct, see the BJ
printer’s instruction manual.
If you stopped the printing and want to resume printing the remaining
images, select [Resume]. Note that printing will not resume if you stop
the printing and any of the following occurs:
• Before resuming the printing, you changed the print order settings.
• Before resuming the printing, you erased an image that was to be
printed.
• In the case of index printing with CP Direct, you changed the paper
cassette before resuming the printing.
• In the case of index printing with PictBridge, you changed the paper
settings before resuming the printing.
•
When you stopped the printing, the CF card’s remaining capacity was low.
If there is a printing problem, see page 129 for PictBridge, page 132 for
CP Direct, or page 135 for Bubble Jet Direct.
Download from Www.Somanuals.com. All Manuals Search And Download.
146
Customizing
the Camera
The current camera settings can be saved under the
Mode Dial’s <l> setting.
Also, Custom Functions enable you to fine-tune your
camera to suit your shooting preferences.
Custom Functions work in all modes except <1> (Full
Auto).
Download from Www.Somanuals.com. All Manuals Search And Download.
147
3 Register Camera SettingsN
Most of the current camera settings can be set under the Mode Dial’s <
l>
setting. Set the shooting mode to any mode except <
1> (Full Auto). The
camera settings cannot be registered in the <1> (Full Auto) mode.
Select [Register camera settings].
1
Turn the <5> dial to select [c
Register camera settings], then
press <0>.
Select [OK].
Turn the <5> dial to select [OK],
then press <0>.
2
X The following camera settings will be
registered under the Mode Dial’s
<l> setting:
Shooting settings
Shooting mode and settings, AF mode, AF point selection, Metering
mode, ISO speed, Drive mode, Exposure compensation, Flash exposure
compensation, White balance
Menu settings
Quality, Beep, Shoot w/o card, AEB, WB SHIFT/BKT, Custom WB, Color
temp., Color space, Picture Style, Review time, AF points, Histogram, Auto
power off, Auto rotate, LCD brightness, File numbering (method), Custom
Functions (C.Fn)
Even when the Mode Dial is set to the <l> setting, you can still change the
drive mode and menu settings. If you want to include those changes under
the <l> setting, just follow the above procedure.
To view the settings registered under the <l> setting, set the Mode Dial
to the <l> setting and press the <B> button. The registered
settings will be displayed on the LCD monitor.
To revert the <l> setting to the default, select [Clear registered
camera set.] with step 2 explained on page 150. The settings will be
reset to the settings shown on page 37.
Download from Www.Somanuals.com. All Manuals Search And Download.
148
3 Setting a Custom FunctionN
Select [Custom Functions (C.Fn)].
1
Turn the <5> dial to select [c
Custom Functions (C.Fn)], then
press <0>.
X The Custom Function screen will
appear.
Custom Function No.
Select Custom Function No.
Turn the <5> dial to select the
desired setting, then press <0>.
2
Change the setting.
3
Turn the <5> dial to select the
desired setting, then press <0>.
Repeat steps 2 and 3 if you want to
set other Custom Functions.
On the bottom of the screen, you can see
the current Custom Function settings.
Description
Exit the menu.
Press the <M> button to return
to the menu.
4
When you exit the menu, <K> will
be displayed on the LCD panel.
Even if the C.Fn-00 focusing screen setting is changed from C.Fn-00-0 to
something else, <K> will not be displayed on the LCD panel.
Download from Www.Somanuals.com. All Manuals Search And Download.
149
3 Setting a Custom FunctionN
Resetting All Custom FunctionsN
Select [Clear settings].
1
Turn the <5> dial to select [c
Clear settings], then press <0>.
X The Clear settings screen will appear.
Select [Clear all Custom
2 Functions].
Turn the <5> dial to select [Clear all
Custom Functions], then press
<0>.
Select [OK].
3
Turn the <
press <
will be reset to the default settings.
5
> dial to select [OK], then
0
>. All the Custom Functions
The C.Fn-00 focusing screen setting will not be canceled.
When the shooting mode is <l>, the camera settings and Custom
Function settings cannot be reset or cleared to the default settings.
Download from Www.Somanuals.com. All Manuals Search And Download.
150
3
Custom Function SettingsN
C.Fn-01
SET function when shooting
You can change the function assigned to <0>.
0: Default (no function)
1: Change quality
After pressing <0>, look at the LCD panel and turn the <5> dial
to set the recording quality directly.
2: Change Picture Style
Press the <0> button to display the Picture Style selection screen
on the LCD monitor. Turn the <5> dial to select the desired
Picture Style, then press <0>.
3: Menu display
Gives the same function as the <M> button.
4: Image replay
Gives the same function as the <x> button.
C.Fn-02
Long exp. noise reduction
0: Off
1: Auto noise reduction
For 1 sec. or longer exposures, noise reduction is performed
automatically if long exposure noise is detected. Setting this to
[Auto noise reduction] is very effective.
2: On
Noise reduction is performed for all exposures 1 sec. or longer. Setting
this may reduce the noise even for exposures which would not have been
noise detected/reduced at the [Auto noise reduction] setting.
After the exposure, noise reduction may take the same amount of time as the exposure time. While
the noise reduction is in progress, image playback and menu operation are not possible. However,
you can still shoot as long as the maximum burst indicator in the viewfinder shows “1” or higher.
C.Fn-03
Flash sync. speed in Av mode
0: Auto
1: 1/200sec. (fixed)
Sets the flash sync speed to 1/200 sec. in the aperture-priority AE
(Av) mode. (Against dark backgrounds such as the night sky, the
subject’s background will look dark.)
Download from Www.Somanuals.com. All Manuals Search And Download.
151
3 Custom Function SettingsN
C.Fn-04
Shutter/AE lock button
0: AF/AE lock
1: AE lock/AF
Convenient when you want to focus and meter separately. Press the <
A>
button to autofocus and press the shutter button halfway to attain AE lock.
2: AF/AF lock, no AE lock
In the AI Servo AF mode, you can press the <A> button to stop
the AF operation momentarily. This prevents the AF from being
thrown off by any obstacle passing between the camera and
subject. The exposure is set at the moment the picture is taken.
3: AE/AF, no AE lock
This is useful for subjects which keep moving and stopping
repeatedly. In the AI Servo AF mode, you can press the <
A> button
to start or stop the AI Servo AF operation. The exposure is set at the
moment the picture is taken. Thus, the focusing and exposure will
always be at the optimum point as you wait for the decisive moment.
C.Fn-04 and C.Fn-19-0, 1, 2 (p.157) both have AF start/stop and AE lock
functions. If you have set both these Custom Functions and you execute
both Custom Function operations, the latter operation will not work. The only
exception will be when AF stop is executed after AF start.
C.Fn-05
AF-assist beam
Enables or disables the EOS-dedicated Speedlite’s AF-assist beam.
0: Emits
The AF-assist beam is emitted when necessary.
1: Does not emit
C.Fn-06
Exposure level increments
0: 1/3-stop
1: 1/2-stop
Sets 1/2-stop increments for the shutter speed, aperture, exposure compensation, AEB, etc.
The exposure level will be displayed in the viewfinder and on the LCD panel as shown below.
Download from Www.Somanuals.com. All Manuals Search And Download.
152
3 Custom Function SettingsN
C.Fn-07
Flash firing
Enables or disables the firing of an external flash or non-Canon flash
connected to the PC terminal.
0: Fires
1: Does not fire
C.Fn-08
ISO expansion
0: Off
1: On
Enables or disables the selection of the “L” setting for ISO 50 and
“H” setting for ISO 3200.
C.Fn-09
Bracket sequence / Auto cancel
You can change the AEB sequence when the pictures are bracketed with the shutter
speed or aperture and the file-saving sequence for white balance bracketing (WB-BKT).
When “Auto cancellation” is set, bracketing will be canceled in the following cases:
AEB: You turn the <4> switch to <2>, change lenses, have flash-
ready, replace the battery, or replace the CF card.
WB-BKT: You turn the <4> switch to <2>, replace the battery, or
replace the CF card.
0: 0, -, +/Enable
1: 0, -, +/Disable (Auto cancel works only if the flash is ready.)
The first bracketed shot is the standard exposure (or exposed with the
standard white balance). This bracketing sequence can be repeated.
2: -, 0, +/Enable
Starts the bracketing sequence with the minus (or bluish or magenta bias) setting.
3: -, 0, +/Disable (Auto cancel works only if the flash is ready.)
Repeats the bracketing sequence starting with the minus (or bluish
or magenta bias) setting. This bracketing sequence can be repeated.
WB bracketing
AEB
B/A Bias
M/G Bias
0 : Standard exposure 0 : Standard white balance 0 : Standard white balance
- : Decreased exposure - : More blue
+ : Increased exposure + : More amber
- : More magenta
+ : More green
Download from Www.Somanuals.com. All Manuals Search And Download.
153
3 Custom Function SettingsN
C.Fn-10
Superimposed display
0: On
1: Off
The AF point in the viewfinder will not flash in red. Recommended
when it is bothersome to see it light up.
The AF point will still light when you select it.
C.Fn-11
Menu button display position
When you press the <
M> button, you can set the menu screen setting.
0: Previous (top if power off)
Displays the preceding menu screen that was used. Note that the
top menu screen [Quality] will be displayed instead when the
<4> switch is turned <2>.
1: Previous
Displays the preceding menu screen that was used.
2: Top
Always displays the top menu screen [Quality].
C.Fn-12
Mirror lockup
0: Disable
1: Enable
Effective for close-up and telephoto shots to prevent camera shake caused
by the mirror’s reflex action. See page 97 for the mirror lockup procedure.
C.Fn-13
AF point selection method
0: Normal
Press the <S> button and use <9> to select the AF point.
1: Multi-controller direct
Without pressing the <S> button first, you can just use the <9>
to select the desired AF point. Pressing the <S> button will set it
to automatic AF point selection.
2: Quick Control Dial direct
Without pressing the <
to select an AF point directly. By holding down the <
turning the < > dial, you can set the exposure compensation.
S
> button first, you can just use the <
5> dial
S
> button and
6
Download from Www.Somanuals.com. All Manuals Search And Download.
154
3 Custom Function SettingsN
C.Fn-14
E-TTL II
0: Evaluative
Fully automatic flash photography for all conditions, from low light
to daylight fill-flash.
1: Average
The flash is averaged for the entire area covered by the flash.
Since automatic flash exposure compensation will not be
executed, you may have to set it yourself depending on the scene.
This also applies if you use FE lock.
C.Fn-15
Shutter curtain sync.
0: 1st-curtain sync.
1: 2nd-curtain sync.
When a slow shutter speed is set, you can capture a light trail
following the subject. The flash fires right before the shutter
closes. This Custom Function can be used to obtain 2nd-curtain
sync effects even with EX-series Speedlites which do not have this
feature. If the EX-series Speedlite has this feature, it will override
this Custom Function.
When 2nd-curtain sync is used, a preflash will be fired for flash metering
control right after you press the shutter button completely. Remember that
the main flash will fire right before the shutter closes.
C.Fn-16
Safety shift in AV or TV
0: Disable
1: Enable
This works in the shutter-priority AE (Tv) and aperture-priority AE
(Av) modes. If the subject’s brightness changes suddenly and the
current shutter speed or aperture becomes unsuitable, the shutter
speed or aperture is shifted automatically to obtain a suitable
exposure.
Download from Www.Somanuals.com. All Manuals Search And Download.
155
3 Custom Function SettingsN
C.Fn-17
AF point activation area
0: Standard
1: Expanded
In the AI SERVO AF mode when the center AF point is selected,
six invisible Assist AF points within the spot metering circle also
become active. Therefore, seven AF points will track the subject
(p.76). This is effective for subjects that move erratically, making it
difficult for only the center AF point to track it.
C.Fn-18
LCD displ -> Return to shoot.
0: With Shutter Button only
1: Also with A etc.
During image playback or the menu display, pressing the <A>,
<E>, <S>, <Q>, <R>, <U>, or depth-of-field
preview button will exit the image playback or menu display and
make the pressed button active.
Also, during the image review right after image capture, you can
hold down the <l> button and press the <u> or <I> button
to magnify or reduce the image.
Even during image playback with the <x> button, you can hold down
the <l> button and press the <u> or <I> button to magnify or
reduce the image.
“Easy Printing” (p.138) will not work.
Download from Www.Somanuals.com. All Manuals Search And Download.
156
3 Custom Function SettingsN
C.Fn-19
Lens AF stop button function
0: AF stop
1: AF start
AF operates only while the AF stop button is pressed. While the
button is pressed, AF operation with the camera is disabled.
2: AE lock while metering
When the button is pressed while metering is still active, AE lock is
applied. Convenient when you want to focus and meter separately.
3: AF point: M -> Auto / Auto -> ctr
In the manual AF point selection mode, the button instantly
switches to automatic AF point selection from manual AF point
selection only while you hold it down. Convenient when you are no
longer able to focus track a moving subject with a manually-
selected AF point in the AI Servo AF mode. In the automatic AF
point selection mode, the button selects the center AF point only
while you hold it down.
4: ONE SHOT <-> AI SERVO
In the One-Shot AF mode, the button switches to the AI Servo AF
mode only while you hold it down. In the AI Servo AF mode, the button
switches to the One-Shot AF mode only while you hold it down.
Convenient when you need to keep switching between One-Shot AF
and AI Servo AF for a subject which keeps moving and stopping.
5: IS start
With the lens’ IS switch already ON, the Image Stabilizer operates
only while you press the button.
The AF stop button is provided only on super telephoto lenses.
C.Fn-20
Add original decision data
0: Off
1: On
Data for verifying whether the image is original or not is appended
to the image. When an image appended with the verification data
is played back, the <L> icon will be displayed. (p.108) To verify
whether the image is original, the Data Verification Kit DVK-E2
(optional) is required.
Download from Www.Somanuals.com. All Manuals Search And Download.
157
3 Custom Function SettingsN
C.Fn-00
Focusing Screen
The camera provides interchangeable focusing screens. This Custom
Function must be set so that the exposure correction matches the
respective focusing screen.
0: Ee-A
1: Ee-D
2: Ee-S
About focusing screen characteristics
Ee-A: Standard Precision Matte
Standard focusing screen that comes with the camera. Provides
good viewfinder brightness and enables easy manual focusing.
Ee-D: Precision Matte with grid
This is the Ee-A with a grid. It makes it easier to align horizontal
or vertical lines.
Ee-S: Super Precision Matte
Focusing screen which makes manual focusing easier than with
the Ee-A. Effective for users who mainly focus manually.
Super Precision Matte Ee-S and lens’s maximum aperture
Optimum for the lenses whose maximum aperture is f/2.8 or larger.
With the lenses whose maximum aperture is smaller than f/2.8, the
viewfinder looks darker than attaching the standard focusing screen Ee-A.
Since the Ee-A focusing screen comes with the EOS 5D, C.Fn-00-0 is
already set.
To change the focusing screen, follow the instructions that comes with
the focusing screen.
The C.Fn-00 setting is not included in the registered camera settings
(p.148).
Download from Www.Somanuals.com. All Manuals Search And Download.
158
Reference
This section will help you understand your camera
better. It covers information on camera features, system
accessories, and other reference information.
Download from Www.Somanuals.com. All Manuals Search And Download.
159
Shooting Combinations
AF Modes and Drive Modes
AF mode
AI Focus AF
Drive mode
One-Shot AF
AI Servo AF
An image cannot be taken Automatically
unless focus is achieved. switches
When focus is achieved, it between ONE
The focus tracks the
subject movement.
The exposure is set at
is locked. With evaluative SHOT AF and AI the moment the
uSingle
shooting
metering, the exposure
Servo AF
picture is taken.
setting is also locked. (The according to the
exposure setting is stored subject status.
in memory before the shot
is taken.)
The above conditions
apply during continuous
Continuous shooting. During
The above conditions
apply during continuous
shooting. During
i
shooting
continuous shooting
(max. 3 shots/sec.),
focusing is not executed.
continuous shooting
(max. 3 shots/sec.),
focusing is executed.
AE lock
(Other than the <1> (Full Auto) mode.)
AF point selection
Metering mode
Automatic AF point
selection
Manual AF point
selection
qEvaluative
Metering*
AE lock is applied at the AF
point that achieved focus.
AE lock is applied at the
selected AF point.
wPartial Metering
rSpot Metering
AE lock is applied at the center AF point.
eCenter-weighted
Average Metering
* When the lens’ focus mode switch is set to <MF>, AE lock is applied at the
center AF point.
Download from Www.Somanuals.com. All Manuals Search And Download.
160
Program Line
The following program line applies when the camera is in Program AE
<d> mode.
200
ISO 100
400
800
1600
6
7
8
9
10 11 12 13 14 15 16 17 18 19 20 21 22 23
5
4
3
2
1
0
32
22
16
11
8
5.6
4
-1
-2
-3
-4
2.8
2
1.4
1.0
-5
EV
30 15
8
4
2
1
2
4
8
15 30 60 125 250 500 1000 2000 4000 8000
Shutter speed
Program Line Description
The lower horizontal axis represents the shutter speed, and the right-
hand vertical axis represents the aperture value. The combinations of
shutter speed and aperture value automatically determined by Program
AE are shown as lines with respect to the subject brightness (Exposure
Value) gradations on the left and top edges of the graph.
Example:Using an EF50mm f/1.4 USM lens with a subject brightness of
EV12, the point where the diagonal line from EV12 (on the top
edge) intersects the Program AE line represents the
corresponding shutter speed (1/320 second) and aperture
value (f/3.5) that the program sets automatically.
The diagonal arrowed lines at the upper left indicate the
metering range for each ISO speeds.
Download from Www.Somanuals.com. All Manuals Search And Download.
161
Troubleshooting Guide
If there is a problem, first refer to this Troubleshooting Guide. If this
Troubleshooting Guide does not resolve the problem, contact your
dealer or nearest Canon Service Center.
Power Source
The battery cannot be recharged.
You are using the wrong battery.
X Do not recharge any battery pack other than Battery Pack BP-
511A, BP-514, BP-511, or BP-512.
The battery is not properly attached to the battery charger.
X Attach the battery properly to the charger. (p.22)
The camera does not operate even when the <
4
> switch is set to <1
> or <J
>.
The battery is exhausted.
X Recharge the battery. (p.22)
The battery is not installed properly.
X Install the battery properly. (p.24)
Battery compartment cover is not closed.
X Close the battery compartment cover securely. (p.24)
CF card slot cover is not closed.
X Close the CF card slot cover securely. (p.28)
The access lamp blinks even when the <
4
> switch is set to <2
>.
If you set the <4> switch to <2> right after shooting, the
access lamp will still light/blink for a few seconds while the
image is recorded onto the CF card.
X
When the camera finishes recording the image to the CF card, the access
lamp will stop blinking and the power will turn off automatically.
The battery becomes exhausted quickly.
The battery is not fully charged.
X Recharge the battery fully. (p.22)
The battery’s service life has expired.
X Replace the battery with a new one.
Download from Www.Somanuals.com. All Manuals Search And Download.
162
Troubleshooting Guide
The camera turns off by itself.
Auto power off is in effect.
X Press the shutter button halfway. If you do not want auto power off
to take effect, set [c Auto power off] on the menu to [Off].
Only the <c> icon blinks on the top LCD panel.
The battery is almost exhausted.
X Recharge the battery. (p.22)
Shooting
No images can be shot or recorded.
The CF card is not properly inserted.
X Insert the CF card properly. (p.28)
The CF card is full.
X Use a new CF card or erase unnecessary images. (p.28, 118)
The battery is exhausted.
X Recharge the battery. (p.22)
You did not focus well. (The focus confirmation light <o> in
the viewfinder blinks.)
X Press the shutter button halfway again and focus the subject. If
you still cannot focus properly, focus manually. (p.30, 80)
The LCD monitor does not display a clear image.
The LCD monitor screen is dirty.
X Use a soft, lens cloth to clean the screen.
The LCD’s service life has expired.
X Consult your nearest customer service center or dealer.
Download from Www.Somanuals.com. All Manuals Search And Download.
163
Troubleshooting Guide
The image is out of focus.
The lens focus mode switch is set to <MF>.
X Set the lens focus mode switch to <AF>. (p.27)
Camera shake occurred when you pressed the shutter
button.
X To prevent camera shake, hold the camera still and press the
shutter button gently. (p.30, 44)
The CF card cannot be used.
[Err **] is displayed on the LCD panel.
X If it is [Err CF], see page 120.
X If it is [Err 02], see page 165.
You are using a non-Canon CF card.
X Using Canon CF cards is recommended. (p.167)
Image Review & Operation
The image cannot be erased.
The image is erase-protected.
X Cancel the protection. (p.117)
The wrong shooting date and time is displayed.
The correct date and time has not been set.
X Set the correct date and time. (p.40)
No image appears on the TV screen.
Video cable plugs are not inserted all the way.
X Insert the video cable plugs firmly all the way. (p.116)
The correct video format (NTSC or PAL) has not been set.
X Set the camera to the correct video format to match the TV set.
(p.36)
You are not using the video cable that came with the camera.
X Use the video cable that came with the camera. (p.116)
Download from Www.Somanuals.com. All Manuals Search And Download.
164
Error Codes
If a camera error occurs, “Err xx” will be displayed on the LCD panel.
Follow the instruction below to resolve the problem for respective error
code.
If the same error occurs often, something is probably wrong with the
camera. Jot down the “xx” error code and take your camera to the
nearest Canon Service Center.
If an error occurs after you take a picture, the camera might have
missed the shot. Press the <x> button to see if the image appears on
the LCD monitor.
Error Code
Err 01
Countermeasures
Communications between the camera and lens is faulty.
Clean the lens contacts. (p.11)
There is a problem with the CF card. Try any of the following:
Remove and re-insert the memory card. Formatting the CF
Card. Use another CF card instead.
Err 02
Err 04
The memory card is full. Erase unnecessary images in the card
or replace the CF card.
An error other than the above has occurred.
Press the shutter button halfway or remove and reinstall the
battery.
Err 99
This error may occur if you use a non-Canon lens and the
camera or lens does not operate properly.
Download from Www.Somanuals.com. All Manuals Search And Download.
165
Major Accessories (Optional)
Battery Pack BP-511A
High-capacity, lithium-ion, secondary power pack.
AC Adapter Kit ACK-E2
Power source kit (AC adapter, DC coupler, power cord)
for supplying power to the camera with a household
power outlet. Compatible with 100 - 240 V AC.
Compact Power Adapter CA-PS400
Quick charger for BP-511A. It takes about 110 minutes to
recharge one pack. Two packs can be attached to it at
one time. DC Coupler DR-400 (optional) can also be
connected to the CA-PS400. Compatible with 100 - 240 V
AC.
Battery Grip BG-E4
This accommodates two BP-511A packs or six size-AA
batteries. It has a vertical-grip shutter button, electronic
dial, AE lock/FE lock button, and AF point selection
button.
Shoe-mount Speedlites
An EX-series Speedlite can be attached to the camera’s
hot shoe. In the same way as normal exposures, you can
use E-TTL II autoflash for flash exposures.
Macro Lites
The EX-series Macro Lites (two models) are ideal for
close-up flash photography. You can fire only one or both
flash tubes and control the flash ratio to easily obtain
sophisticated lighting effects with E-TTL II autoflash.
Download from Www.Somanuals.com. All Manuals Search And Download.
166
Major Accessories (Optional)
Remote Switch RS-80N3
This is a remote switch to prevent camera shake for
super-telephoto shots, macroshooting, and bulb
exposures. The cord is 80 cm/2.6 ft. The switch provides
the same effect as pressing the shutter button halfway or
completely. A shutter-release lock is also provided. The
connection plug for the camera has a quick-lock feature.
Timer Remote Controller TC-80N3
Attached with an 80 cm/2.6 ft cord, this remote switch has
four built-in functions: 1. Self-timer, 2. Interval timer, 3.
Bulb-exposure timer, and 4. Shutter-release count
setting. The timer can be set anywhere from 1 sec. to 99
hours, 59 min., 59 sec. in 1-sec. increments. The
connection plug for the camera has a quick-lock feature.
Wireless Controller LC-5
Wireless controller effective up to 100 meters/330 ft. It
consists of a transmitter and receiver. The receiver’s
camera connection plug connects to the camera’s remote
control terminal.
E-series Dioptric Adjustment Lenses
One of ten E-series dioptric adjustment lenses (-4 to +3
diopters) can be attached to the camera’s eyepiece to
further expand the dioptric adjustment range.
Focusing Screens Ee-D and Ee-S
The Ee-D has a grid for easier alignment with horizontal
or vertical lines, and the Ee-S makes manual focusing
easier.
CF card
Data storage media where the captured images are
recorded.
CF cards made by Canon are recommended.
Download from Www.Somanuals.com. All Manuals Search And Download.
167
System Map
Eyepiece Extender
EP-EX15
ST-E2 220EX 430EX 580EX Macro Ring Lite
Macro Twin Lite
MT-24EX
Rubber Frame Eb
MR-14EX
E-series Dioptric
Adjustment Lenses
Bundled
Accessories
Focusing Screen
Ee-A
Eyecup Eb
Wide Strap
EW-100DGR
Angle Finder C
Focusing Screen
Ee-D
Ee-S
Date / time
CR2016
lithium battery
Battery Pack
BP-511A
Battery Charger
CG-580 or CB-5L
Battery Grip
BG-E4
Battery Pack
BP-511A, BP-514
Compact Power
Adapter
CA-PS400
AC Adapter DC Coupler
AC-E2
DR-400
Car Battery
Cable
CB-570
Battery
Charger
CG-570
Compact Power
AC Adapter Kit
ACK-E2
Adapter
CA-570
EF lenses
Download from Www.Somanuals.com. All Manuals Search And Download.
168
System Map
CF card
Data Verification Kit
DVK-E2 (Ver.2.2)
PC card adapter
Personal computer
Windows XP
PC card slot
(Home Edition / Professional)
Windows 2000 Professional
Windows ME
Windows 98 Second Edition
Mac OS X
CF Card reader
USB port
(2.0/1.1)
Wireless LAN adapter Ethernet port
·
·
EOS DIGITAL Solution Disk
Software Instruction Manual
(PDF)
Interface Cable
IFC-400PCU
Wireless LAN
access point
Wireless File Transmitter
WFT-E1 / WFT-E1A
Video Cable
VC-100
PictBridge-compatible printer
Remote Switch
RS-80N3
Timer Remote
Controller
CP Printer
TC-80N3
Wireless
Controller
LC-5
Bubble Jet Direct-compatible printer
TV/Video
Download from Www.Somanuals.com. All Manuals Search And Download.
169
Specifications
• Type
Type:
Digital, single-lens reflex, AF/AE camera
Recording media:
Type I or II CF card
* Compatible with Microdrive and 2GB or larger CF cards
35.8 x 23.9mm
Canon EF lenses (except EF-S lenses)
Canon EF mount
Image sensor size:
Compatible lenses:
Lens mount:
• Imaging Element
Type:
High-sensitivity, high-resolution, large single-plate CMOS
sensor
Pixels:
Effective pixels: Approx. 12.80 megapixels
Total pixels: Approx. 13.30 megapixels
3:2
Aspect ratio:
Color filter system:
Low-pass filter:
RGB primary color filter
Located in front of the image sensor, non-removable
• Recording System
Recording format:
Image type:
Design rule for Camera File System 2.0
JPEG, RAW (12bit)
RAW+JPEG
simultaneous recording: Possible
File size:
(1) Large/Fine:
Approx. 4.6MB (4368 x 2912 pixels)
(2) Large/Normal: Approx. 2.3MB (4368 x 2912 pixels)
(3) Medium/Fine:
(4) Medium/Normal: Approx. 1.4MB (3168 x 2112 pixels)
(5) Small/Fine: Approx. 2.0MB (2496 x 1664 pixels)
(6) Small/Normal: Approx. 1.0MB (2496 x 1664 pixels)
(7) RAW: Approx. 12.9MB (4368 x 2912 pixels)
Approx. 2.7MB (3168 x 2112 pixels)
* Exact file sizes depend on the subject, ISO speed,
Picture Style, etc.
Folder setting:
File numbering:
Color space:
Picture Style:
Folder creation/selection enabled
Consecutive numbering, auto reset, manual reset
sRGB, Adobe RGB
Standard, Portrait, Landscape, Neutral, Faithful,
Monochrome, User Defined 1, 2, 3
USB 2.0 Hi-Speed (Print/PTP / PC connect. selectable)
Video output (NTSC/PAL)
Interface:
Download from Www.Somanuals.com. All Manuals Search And Download.
170
Specifications
• White Balance
Type:
Auto, daylight, shade, cloudy, tungsten light, white
fluorescent light, flash, custom, color temperature setting
Auto white balance with the image sensor
Auto white balance:
Color temperature
compensation:
White balance correction:
±9 stops in full-stop increments
White balance bracketing:
±3 stops in full-stop increments
* Blue/amber bias or magenta/green bias possible
Color temperature
information transmission: Provided
• Viewfinder
Type:
Eye-level pentaprism
Coverage:
Magnification:
Eyepoint:
Vertical/Horizontal approx. 96%
Approx. 0.71x (-1 diopter with 50mm lens at infinity)
20 mm
Built-in dioptric adjustment: -3.0 - +1.0 diopter
Focusing screen:
Mirror:
Interchangeable (two types optional), Ee-A (Precision
Matte) focusing screen provided
Quick-return half mirror
(Transmission:reflection ratio of 40:60, no mirror cut-off
with EF600mm f/4 or shorter lens)
Viewfinder information: AF information (AF points, focus confirmation light),
exposure information (shutter speed, aperture value, AE
lock, exposure level, spot metering circle, exposure
warning), flash information (flash ready, high-speed sync,
FE lock, flash exposure compensation), white balance
correction, maximum burst, CF card information
Depth-of-field preview: Enabled with depth-of-field preview button
• Autofocus
Type:
TTL-CT-SIR with a CMOS sensor
(TTL secondary image-registration, phase detection)
9 plus 6 Assist AF points
AF points:
Metering range:
Focus modes:
EV -0.5 - 18 (at 20°C/68°F, ISO 100)
One-Shot AF, AI Servo AF, AI Focus AF, Manual focusing
(MF)
AF point selection:
Auto, manual
Selected AF point display: Superimposed in viewfinder and indicated on LCD panel
Download from Www.Somanuals.com. All Manuals Search And Download.
171
Specifications
AF-assist beam:
Emitted by the dedicated Speedlite
• Exposure Control
Metering modes:
35-zone TTL full aperture metering
• Evaluative metering (linkable to any AF point)
• Partial metering (approx. 8% of viewfinder at center)
• Spot metering (approx. 3.5% of viewfinder at center)
• Center-weighted Average Metering
Metering range:
Exposure control:
EV 1-20 (at 20°C/68°F with EF50mm f/1.4 lens, ISO 100)
Full auto, program AE (shiftable), shutter-priority AE,
aperture-priority AE, manual exposure, E-TTL II
autoflash
ISO speed:
Equivalent to ISO 100-1600 (in 1/3-stop increments), ISO
speed can be expanded to ISO 50 and 3200.
Full auto: ISO 100-400 set automatically
Exposure compensation: Manual: ±2 stops in 1/3- or 1/2-stop increments (can be
combined with AEB)
AEB: ±2 stops in 1/3- or 1/2-stop increments
AE lock:
Auto: Applied in One-Shot AF mode with evaluative
metering when focus is achieved.
Manual: By AE lock button in all metering modes.
• Shutter
Type:
Shutter speeds:
Electronically-controlled, focal-plane shutter
1/8000 to 30 sec. (1/3- and 1/2-stop increments), bulb
X-sync at 1/200 sec.
Shutter release:
Self-timer:
Soft-touch electromagnetic release
10-sec. delay
Remote control:
Remote control with N3 type terminal
• External Speedlite
EOS-dedicated Speedlite: E-TTL II autoflash with EX-series Speedlite
Flash exposure compensation: ±2 stops in 1/3- or 1/2-stop increments.
FE lock:
PC terminal:
Provided
Provided
Zooming to match
lens focal length:
Provided
Download from Www.Somanuals.com. All Manuals Search And Download.
172
Specifications
• Drive System
Drive modes:
Continuous:
Single, continuous, and Self-timer (10 sec.)
Max. 3 shots per sec.
Max. burst:
JPEG (Large/Fine): Approx. 60, RAW: Approx. 17
* With a Canon 512MB CF card.
* Varies depending on the subject, ISO speed, Picture
Style, CF card, etc.
• LCD Monitor
Type:
Monitor size:
Pixels:
TFT color liquid-crystal monitor
2.5 in.
Approx. 230,000
Coverage:
100% with respect to the effective pixels
Brightness adjustment: Five levels provided
Interface languages:
15
• Image Playback
Display format:
Single image, shooting information, 9-image index,
magnified view (Approx. 1.5x - 10x), autoplay, image
rotation, and Jump (by 10 or 100 images, by date, by
folder)
Highlight warning:
In the shooting information mode, any overexposed
highlight areas with no image information will blink.
Brightness, RGB
Histogram:
AF point display:
Enabled
• Image Protection and Erase
Protect:
Erase:
Single images can be erase-protected or not.
One image or all images in the CF card can be erased
(except protected images).
• Direct Printing
Compatible printers:
CP Direct, Bubble Jet Direct, and PictBridge-compatible
printers
Printable images:
Easy Print feature:
JPEG images (DPOF printing possible)
Provided
• DPOF: Digital Print Order Format
DPOF: Version 1.1 compatible
Download from Www.Somanuals.com. All Manuals Search And Download.
173
Specifications
• Customization
Camera setting registration: Under Mode Dial’s <l> setting
Custom Functions:
21 Custom Functions with 57 settings
• Power Source
Battery:
One Battery Pack BP-511A, BP-514, BP-511, or BP-512.
* AC power can also be supplied with the DC Coupler.
* With Battery Grip BG-E4, size-AA batteries can be
used.
Battery life:
At 20°C / 68°F: Approx. 800 shots
At 0°C / 32°F: Approx. 400 shots
* The above figures apply when a fully-charged Battery
Pack BP-511A is used.
Battery check:
Power saving:
Date/Time battery:
Automatic
Provided. Power turns off after 1, 2, 4, 8, 15, or 30 min.
One CR2016 lithium battery
• Dimensions and Weight
Dimensions (W x H x D): 152 x 113 x 75 mm / 6.0 x 4.4 x 3.0 in.
Weight:
Approx. 810g / 28.6 oz. (body only)
• Operation Environment
Working temperature range: 0°C- 40°C / 32°F - 104°F
Working humidity:
85% or less
• Battery Pack BP-511A
Type:
Rechargeable lithium ion battery
Rated voltage:
Battery capacity:
7.4 V DC
1390 mAh
Dimensions (W x H x D): 38 x 21 x 55 mm / 1.5 x 0.8 x 2.2 in.
Weight: Approx. 82 g / 2.9 oz
• Battery Charger CG-580
Compatible battery:
Recharging time:
Battery Pack BP-511A, BP-514, BP-511, or BP-512
BP-511A, BP-514: Approx. 100 min.
BP-511, BP-512: Approx. 90 min.
100 - 240 V AC
Rated input:
Rated output:
8.4 V DC
Working temperature range: 0°C - 40°C / 32°F - 104°F
Working humidity: 85% or less
Dimensions (W x H x D): 91 x 67 x 31 mm / 3.6 x 2.6 x 1.2 in.
Weight: Approx. 115 g / 4.0 oz
Download from Www.Somanuals.com. All Manuals Search And Download.
174
Specifications
• Battery Charger CB-5L
Compatible battery:
Power cord length:
Recharging time:
Battery Pack BP-511A, BP-514, BP-511, or BP-512
Approx. 1.8 m / 5.9 ft.
BP-511A, BP-514: Approx. 100 min.
BP-511, BP-512: Approx. 90 min.
100 - 240 V AC
Rated input:
Rated output:
8.4 V DC
Working temperature range: 0°C - 40°C / 32°F - 104°F
Working humidity: 85% or lower
Dimensions (W x H x D): 91 x 67 x 32.3 mm / 3.6 x 2.6 x 1.3 in.
Weight: Approx. 105 g / 3.7 oz (excluding power cord)
All the specifications above are based on Canon’s testing standards.
The camera’s specifications and physical appearance are subject to change
without notice.
Download from Www.Somanuals.com. All Manuals Search And Download.
175
Digital Camera Model DS126091 Systems
This device complies with Part 15 of the FCC Rules. Operation is subject
to the following two conditions: (1) This device may not cause harmful
interference, and (2) this device must accept any interference received,
including interference that may cause undesired operation.
Note:This equipment has been tested and found to comply with the limits
for class B digital devices, pursuant to Part 15 of the FCC Rules.
These limits are designed to provide reasonable protection against
harmful interference in a residential installation. This equipment
generates, uses and can radiate radio frequency energy and, if not
installed and used in accordance with the instructions, may cause
harmful interference to radio communications. However, there is no
guarantee that interference will not occur in a particular installation.
If this equipment does cause harmful interference to radio or
television reception, which can be determined by turning the
equipment off and on, the user is encouraged to try to correct the
interference by one or more of the following measures:
— Reorient or relocate the receiving antenna.
— Increase the separation between the equipment and receiver.
— Connect the equipment into an outlet on a circuit different from
that to which the receiver is connected.
—
Consult the dealer or an experienced radio/TV technician for help.
The cable with the ferrite core provided with the digital camera must be
used with this equipment in order to comply with Class B limits in Subpart
B of Part 15 of the FCC rules.
Do not make any changes or modifications to the equipment unless
otherwise specified in the manual. If such changes or modifications
should be made, you could be required to stop operation of the
equipment.
Canon U.S.A. Inc.
One Canon Plaza, Lake Success, NY 11042, U.S.A.
Tel No. (516)328-5600
Download from Www.Somanuals.com. All Manuals Search And Download.
176
Index
Clear all Custom Functions .......... 150
Clear settings ................................. 36
Color saturation.............................. 55
Color space .................................... 67
Color temperature .......................... 63
Color tone....................................... 55
Communication ............................ 123
Compression rate........................... 50
Continuous ..................................... 70
Continuous shooting....................... 82
Contrast.......................................... 55
CP Direct...................................... 130
Custom Functions ........................ 151
Custom WB .................................... 62
A
AC Adapter Kit ........................26, 166
Access lamp....................................29
Accessories...................................166
Add original decision data.............157
Adobe RGB.....................................67
AE ...................................................84
AE lock....................................95, 160
AEB.................................................93
AF mode .........................................74
AF point...........................................77
AF-assist beam.............................152
AI Focus AF ....................................76
AI Servo AF.....................................75
Aperture value.................................88
Attaching the Strap..........................21
Auto play.......................................112
Auto playback ...............................112
Auto power off...........................30, 39
Auto reset........................................71
Auto rotate ....................................105
Automatic AF point selection ..........77
Av....................................................88
D
DC coupler ..................................... 26
Depth-of-field preview .................... 89
Dioptric Adjustment ........................ 44
Direct printing ....................... 121, 145
DPOF ........................................... 139
Drive modes ................................... 82
E
Easy Printing ................................ 138
Erase............................................ 118
Erasing a single image................. 118
Erasing all images........................ 119
Error Codes.................................. 165
E-TTL II autoflash......................... 155
Evaluative metering........................ 81
Exposure compensation................. 92
Exposure level increments ........... 152
EX-series Speedlite...................... 100
Extension.................................. 50, 71
Eyepiece cover......................... 21, 98
B
Battery...............................22, 24, 166
Battery Charger...............................18
Battery check ..................................24
Beeper ............................................99
Bracket sequence .........................153
Bubble Jet Direct...........................133
Bulb exposures ...............................96
Bundled Items...................................3
C
C.Fn ..............................................151
Camera setting display ...................72
Center-weighted Average Metering.....81
CF card .....................11, 28, 120, 167
Clear all camera settings ................37
F
Faithful............................................ 53
FE lock ......................................... 100
Download from Www.Somanuals.com. All Manuals Search And Download.
177
Index
FEB...............................................100
File No. ...........................................70
Filter effects ....................................57
Firmware.........................................36
Flash.....................................100, 102
Flash exposure compensation......100
Flash sync speed..........................151
Focus confirmation light..................17
Focus lock.......................................79
Focus mode switch...................74, 80
Folder..............................................68
Format ..........................................120
FP flash.........................................100
Full Auto..........................................46
Language ....................................... 38
LCD brightness ............................ 106
LCD monitor............................. 11, 36
LCD panel ................................ 11, 16
LCD panel illumination ................... 98
Lens ......................................... 11, 27
M
M (Manual)..................................... 90
Magnified view ............................. 111
Main Dial .................................. 20, 31
Manual AF point selection.............. 77
Manual Focusing............................ 80
Manual reset .................................. 71
Menus ................................ 33, 35, 36
Metering mode ............................... 81
MF.................................................. 80
Mirror Lockup ................................. 97
Mode Dial....................................... 18
Monochrome .................................. 54
Multi-controller.......................... 20, 32
H
Highlight alert................................108
High-speed sync...........................100
Histogram .....................................109
Holding the Camera........................44
I
N
Image processing ...........................51
Image review time.........................104
Image-recording Quality .................50
Index.............................................141
Index display.................................110
INFO. ......................................72, 107
Interface cable ..................................3
ISO expansion ..............................153
ISO speed.......................................60
Neutral............................................ 53
Noise reduction ............................ 151
Nomenclature................................. 14
Non-Canon flash units.................. 102
NTSC ..................................... 36, 116
Number of copies... 128, 131, 134, 142
O
One-Shot AF .................................. 75
J
P
JPEG ..............................................50
Jump by 10 images/100 images...115
Jump by date ................................115
Jump by folder ..............................115
Jump display.................................114
P (Program).................................... 84
PAL......................................... 36, 116
Paper settings .............................. 126
Partial metering.............................. 81
PC terminal .................................. 102
PictBridge..................................... 126
Picture Style ....................... 53, 55, 58
L
Landscape ......................................53
Download from Www.Somanuals.com. All Manuals Search And Download.
178
Index
Playback .......................................107
Playback menu .........................33, 35
Portrait ............................................53
Possible shots...........................25, 51
Power outlet....................................26
Power Switch ............................20, 30
Pressing completely........................30
Pressing halfway.............................30
Print ordering ................................139
Print/PTP.......................................123
Program AE ....................................84
Program shift...................................85
Protect...........................................117
Protection......................................117
Shutter button................................. 30
Shutter curtain synchronization.... 155
Shutter speed................................. 86
Single image display .................... 107
Single shooting............................... 82
Specifications ............................... 170
Spot metering ................................. 81
sRGB.............................................. 67
Standard....................................... 141
Style...................................... 130, 133
Superimposed display.................. 154
System Map ................................. 168
T
Timer .............................................. 20
Toning effect................................... 57
Trimming ...................................... 136
Tv ................................................... 86
Q
Quick Control Dial.....................20, 32
R
RAW................................................51
RAW+JPEG ....................................50
Recharge ........................................22
Replacing the date/time battery ......41
Rotate ...........................................113
U
User Defined .................................. 54
V
Video cable................................... 116
Video OUT.................................... 116
Viewfinder....................................... 17
S
Safety shift ....................................155
Selecting all images......................144
Selecting Individual Images ..........142
Self-timer...................................48, 82
Sensor cleaning ..............................42
Setting the date/time.......................40
Set-up menu .............................33, 36
Sharpness.......................................55
Shoot w/o card................................99
Shooting combinations..................160
Shooting Information.....................108
Shooting menu..........................33, 35
Shooting mode................................18
Shots remaining..............................25
W
WB-BKT ......................................... 65
White balance................................. 61
White balance bracketing............... 65
White balance correction................ 64
Wireless, multi-Speedlite system ... 101
Download from Www.Somanuals.com. All Manuals Search And Download.
179
CANON INC. 30-2, Shimomaruko 3-chome, Ohta-ku, Tokyo 146-8501, Japan
U.S.A.
CANON U.S.A. INC.
For all inquiries concerning this camera, call toll free in the U.S.
1-800-OK-CANON or write to: Customer Relations, Canon U.S.A., Inc.
One Canon Plaza, Lake Success, N.Y. 11042-1198
CANADA
CANON CANADA INC. HEADQUARTERS
6390 Dixie Road, Mississauga, Ontario L5T 1P7, Canada
CANON CANADA INC. MONTREAL BRANCH
5990, Côte-de-Liesse, Montréal Québec H4T 1V7, Canada1010
CANON CANADA INC. CALGARY OFFICE
2828, 16th Street, N.E. Calgary, Alberta T2E 7K7, Canada
For all inquiries concerning this camera, call toll free in Canada
1-800-OK-CANON
EUROPE,
CANON EUROPA N.V.
AFRICA &
Bovenkerkerweg 59-61, P.O. Box 2262, 1180 EG Amstelveen, The Netherlands
CANON COMMUNICATION & IMAGE FRANCE S.A.
102, Avenue du Général de Gaulle 92257 La Garenne-Colombes Cedex, France
CANON UK LTD.
MIDDLE EAST
Woodhatch Reigate Surrey RH2 8BF, United Kingdom
CANON DEUTSCHLAND GmbH
Europark Fichtenhain A10, 47807 Krefeld, Germany
CANON ITALIA S.p.A.
Via Milano 8 I-20097 San Donato Milanese, Milano, Italy
CANON Schweiz AG
Geschäftsbereich Wiederverkauf, Industriestrasse 12, CH-8305 Dietlikon, Switzerland
CANON G. m. b. H.
Oberlaaerstrasse 233, 4th floor, 1100 Wien, Austria
CANON España, S. A.
C/Joaquín Costa, 41, 28002 Madrid, Spain
SEQUE Soc. Nac. de Equip., Lda.,
Praça da Alegria, 58, 2°, 1269-149 Lisboa, Portugal
CENTRAL &
CANON LATIN AMERICA, INC. DEPTO DE VENTAS
SOUTH AMERICA 703 Waterford Way Suite 400 Miami, FL 33126 U.S.A.
CANON LATIN AMERICA, INC. CENTRO DE SERVICIO Y REPARACION
Apartado 2019, Zona Libre de Colón, República de Panamá
ASIA
CANON HONGKONG CO., LTD.
19/F., The Metropolis Tower, 10 Metropolis Drive, Hunghom, Kowloon, Hong Kong
CANON SINGAPORE PTE. LTD.
1 HarbourFront Avenue #04-01 Keppel Bay Tower Singapore 098632
OCEANIA
JAPAN
CANON AUSTRALIA PTY. LTD.
1 Thomas Holt Drive, North Ryde, N.S.W. 2113, Australia
CANON NEW ZEALAND LTD.
Akoranga Business Park, Akoranga Drive, Northcote, Auckland, New Zealand
CANON SALES CO., INC.
16-6, Kohnan 2-chome, Minato-ku, Tokyo 108-8011, Japan
This Instruction Manual booklet is current as of August 2005. For information on
the camera’s compatibility with any accessories and lenses introduced after this
date, contact any Canon Service Center.
CT1-1295-001
© CANON INC. 2005
PRINTED IN JAPAN
Download from Www.Somanuals.com. All Manuals Search And Download.
|
