Preparing to Connect My Multifunction
To My Network
Network Requirements
Before connecting the machine to the network, make sure that configuration of the computer and access point or router is
complete, and that the computer is connected to the network.
Wireless Connection
Before connecting the machine to the network, the computer needs to be connected to the network. Make sure that
configuration of the computer and access point or router is complete.
Download from Www.Somanuals.com. All Manuals Search And Download.
3
Preparing to Connect My Multifunction
To My Network
An "Ad-hoc connection," which establishes a direct wireless connection between
the computer and printer without using an access point, is not supported.
A router or access point is required for your printer to be used on a wireless
network.
Notes on Network Connection
• The configuration, router functions, setup procedures and security settings of
the network device vary depending on your system environment. For details,
refer to your device's instruction manual or contact its manufacturer.
• In an office setup, consult your network administrator
• If you connect to a network that is not protected with security measures, there
is a risk of disclosing data such as your personal information to a third party.
• If an error message appears or if you have trouble with the network
connection, refer to the printed manual: Network Setup Troubleshooting.
• Place the machine and computer on the same network segment.
Download from Www.Somanuals.com. All Manuals Search And Download.
4
Using the Machine from Additional Computers
Software Installation
If the machine is already connected to a wireless connection, it can be used from additional computers on the same network.
To use from additional computers
IMPORTANT
• Log on as the administrator (or a member of the Administrators group).
• Quit all running applications before installation.
• If the firewall function of your security software is turned on, a warning message may appear that Canon software is attempting to access
the network. If such a warning message appears, set the security software to always allow access.
Download from Www.Somanuals.com. All Manuals Search And Download.
5
Using the Machine from Additional Computers
Installing the PIXMA MX432 / MX439 on Additional Computers
If your printer is already set up on your network, and you wish to use the printer from additional computers, you only need to install the printer software
on the other computers. There are no further settings that need to be performed on the printer, and the printer does not have to be connected with the
USB cable.
*Insert the Setup CD-ROM that came with your printer into your CD-ROM drive and proceed through the easy to follow instructions.
*If you don’t have or cannot use the Setup CD-ROM, you can still install the printer using a downloaded file. Click here for information.
Click Next on the initial screen.
Continue to follow any on-screen instructions until the Software
Installation List appears. This is shown on the next page
Download from Www.Somanuals.com. All Manuals Search And Download.
6
Installing the Drivers & Software
Next >>
On the Software Installation List select any additional* software to install and click Next.
*MP Drivers is required for installation and cannot be deselected. In addition, we recommend installing MP Navigator EX and Easy-
PhotoPrint EX in order to take full advantage of your printer’s features.
*If you are using the downloaded ‘Mini Master setup’ file to install the printer, only the MP Drivers and Canon IJ Network Tool will be
installed. Additional software can be downloaded separately. The software can be found in the Software section of Drivers & Software
(the same page where you downloaded the Mini Master setup file)
Download from Www.Somanuals.com. All Manuals Search And Download.
7
Installing the Drivers & Software
Next >>
The drivers and software will begin to install. Continue to follow on-screen instructions.
When the Detected Printers List appears, verify that the ‘MX430 series’ is listed, then click Next.
Download from Www.Somanuals.com. All Manuals Search And Download.
8
Installing the Drivers & Software
Next >>
Click OK on the Setup Completion screen
Continue to follow any on-screen instructions Until the Add Printer screen appears. This is shown on the next
page.
Download from Www.Somanuals.com. All Manuals Search And Download.
9
Installing the Drivers & Software
Next >>
Click Add Printer on the Add Printer screen
Download from Www.Somanuals.com. All Manuals Search And Download.
10
Installing the Drivers & Software
Next >>
Select the MX430 series with Canon IJ Network listed for ‘Kind’, then click Add.
Download from Www.Somanuals.com. All Manuals Search And Download.
11
Installing the Drivers & Software
Next >>
Click Next on the Add Printer screen.
Continue to follow on-screen instructions to finish setup and exit.
Download from Www.Somanuals.com. All Manuals Search And Download.
12
Using the Machine from Additional Computers
Installing the PIXMA MX432 / MX439 on Additional Computers
If you can’t find your CD-ROM, you may download the MX430 series Mini Master Setup, which includes the same step-by-step installation as the CD-
ROM, by following the instructions below:
2. Select the operating system of your computer (see example below).
3. Expand the ‘Drivers’ section by clicking the red triangle, if necessary.
4. Click on the ‘MX430 series Mini Master Setup’ file.
5. After reading the license agreement, click ‘I Agree – Begin Download’ and save the file to your computer or network.
6. Once the download is complete, double-click the file from its download location to begin the installation.
Download from Www.Somanuals.com. All Manuals Search And Download.
13
|