Nomenclature
EF100mm f/2.8
●①
●②
●③
●④
Magnification scale (normal operation)
Distance scale
Depth-of-Field scale
Magnification scale with Life Size Converter
EF attached (EF50mm f/2.5 only)
Distance index
Macro Lenses
EF50mm f/2.5 Compact macro
EF100mm f/2.8 Macro
●⑤
●⑥
●⑦
●⑧
●⑨
●⑩
Focusing ring
Instructions
Focus mode switch
Lens mount index
Contacts
Focusing distance range selector switch
(EF100mm f/2.8 Macro only)
Thank you for purchasing a Canon product.
2. Setting the Focus Mode
The EF50mm f/2.5 Compact macro is a macro lens that can be used for
standard shooting and for close-up shooting up to 1/2 × (0.5×). This is a
standard macro lens for EOS cameras. Lifesize magnification (1×) is also
possible by attaching the Life Size Converter EF sold separately.
The Canon EF100mm f/2.8 Macro is a medium telephoto macro lens that
provides life-size close-up capability.
To shoot in autofocus (AF) mode, set the focus mode switch to AF ❸ .
To shoot in manual focus (MF) mode, set the focus mode switch to MF,
and focus by turning the focusing ring.
●❶
●❷
●❸
●❹
•
Do not touch the rotating parts of the lens while AF is active.
3. Switching the Focusing Distance Range
(EF100mm f/2.8 Macro only)
FULL: Allows a focusing distance range of 0.31 m (Min. focusing
Safety Precautions
∞
distance) to for standard shooting ❹ .
1. Do not look at the sun or a bright light source through the lens
or camera. Doing so could result in loss of vision. Looking at the
sun directly through the lens is especially hazardous.
2. Whether it is attached to the camera or not, do not leave the
lens under the sun without the lens cap attached. This is to
prevent the lens from concentrating the sun’s rays, which could
cause a fire.
LIMIT: Allows a focusing distance range of 0.31 m (life-size) to 0.
(0.25×) for close-up shots.
4. Close-up Photography (Macro Phot
Close-up photos are possible up to 0.5× maximum n with the
EF50mm f/2.5 Compact macro, and up to (life-sization with
the EF100mm f/2.8 Macro. The focusiis thnce from the
subject to the film plane.
When focusing, you can give priority magcation.
Handling Cautions
[Framing Priority]
While looking through tviewder asubject, focus with
the AF or MF mode.
If the lens is taken from a cold environment into a warm one,
condensation may develop on the lens surface and internal parts.
To prevent condensation in this case, first put the lens into an airtight
plastic bag before taking it from a cold to warm environment. Then take
out the lens after it has warmed gradually. Do the same when taking
the lens from a warm environment into a cold one.
[Magnification Priori
(1) Set the lens’ focus ode switch o MF.
(2) Set the magnificati
While referring to the nce scon the lens, turn the focusing ring
to the desired magnificat
1. Mounting and Detaching the Lens
See your camera’s instructions for details on mounting and
detaching the lens.
(3) Focus the subject.
While looking through the viewfinder, move the camera forward or
back to find the point of focus.
•
After detaching the lens, place the lens with the rear end up to prevent
the lens surface and contacts from getting scratched.
If the contacts get soiled, scratched, or have fingerprints on them,
corrosion or faulty connections can result. The camera and lens may
not operate properly.
(4) Touch up the focus.
Turn the focusing ring for fine focusing.
•
•
•
•
Since macro shots have a very shallow depth of field, focus
carefully to obtain proper sharpness.
To prevent camera shake, using a Remote Switch and tripod is
recommended (both sold separately).
•
•
If the contacts get soiled or have fingerprints on them, clean them with
a soft cloth.
To check the depth of field, press the camera’s depth-of-field
preview button.
If you remove the lens, cover it with the dust cap. To attach it properly,
align the lens mount index and the index of the dust cap, and turn
clockwise. To remove it, reverse the order.
Download from Www.Somanuals.com. All Manuals Search And Download.
|