Nomenclature
●①
●②
●③
●④
Focus mode switch
Lens mount index
Contacts
EF Lens
Focusing ring
EF50mm f/1.8 II
Instruction
Thank you for purchasing a Canon product.
1. Mounting and Detaching the Lens
See your camera’s instructions for details on mounting
and detaching the lens.
• After detaching the lens, place the lens with the rear end
up to prevent the lens surface and contacts from getting
scratched.
• If the contacts get soiled, scratched, or have fingerprints
on them, corrosion or faulty connections can resulThe
camera and lens may not operate properly.
• If the contacts get soiled or have fingerprints on tm,
clean them with a soft cloth.
Safety Precautions
1. Do not look at the sun or a bright light source through
the lens or camera. Doing so could result in loss of
vision. Looking at the sun directly through the lens is
especially hazardous.
2. Whether it is attached to the camera or not, do not
leave the lens under the sun without the lens cap
attached. This is to prevent the lens from concentrating
the sun’s rays, which could cause a fire.
• If you remove the lens, cover it with the cap. To
Handling Cautions
attach it properly, align the lent inx and the
If the lens is taken from a cold environment into a warm
one, condensation may develop on the lens surface and
internal parts. To prevent condensation in this case, first
put the lens into an airtight plastic bag before taking it
from a cold to warm environment. Then take out the lens
after it has warmed gradually. Do the same when taking
the lens from a warm environment into a cold one.
index of the dust cap as shown m , and turn
clockwise. To remove reverse er.
2. Setting the Focus ode
To shoot in autofocus (AF) odeset the focus mode switch
to AF ❹ .
To shoot in manual focus (MF) mode, set the focus mode
switch to MF, and focus by turning the focusing ring.
• Do not touch the rotating parts of the lens while AF is
active.
• Do not focus in MF when the focus mode switch is set to
AF.
Download from Www.Somanuals.com. All Manuals Search And Download.
|