Spray Guns
Gravity-Feed Spray Gun
DH7800
• Designed to provide optimal atomization and particle size
• Stainless fluid needle and nozzle are compatible with today’s
advanced coatings
• 600 milliliter acetal cup allows viewing of paint fluid level while
providing chemical resistance and easy cleaning
• In-line 80 mesh filter removes dirt particles from paint,
preventing defects
• Includes adjustable fluid, pattern and air controls
AVG. SCFM Requirement @ 40 PSI
5.9
Gravity-Feed Touch-up Spray Gun
DH7600
• Stainless steel fluid needle and nozzle for corrosion-resistant life
• In-line paint filter removes dirt particles from paint,
preventing defects
• See-through cup allows viewing of paint fluid level
•Includes adjustable fluid, pattern and air controls
AVG. SCFM Requirement @ 40 PSI
2.5
High Volume Low Pressure (HVLP)
Spray guns operate at lower air cap pressures than conventional spray guns (below 10
PSI). Atomized paint from an HVLP spray gun is delivered to the work surface at lower
velocities than conventional spray guns, reducing bounceback and overspray. This results
in a higher transfer efficiency of material, reducing paint consumption by 20-30%.
HVLP Gravity-Feed Spray Gun
DH7900
• Designed to provide optimal atomization and particle size
• Stainless fluid needle and nozzle are compatible with
today’s advanced coatings
• 600 milliliter acetal cup allows viewing of paint fluid level
while providing chemical resistance and easy cleaning
• In-line 80 mesh filter removes dirt particles
from paint, preventing defects
• Includes adjustable fluid and pattern controls
AVG. SCFM Requirement @ 40 PSI
6.2
Visit us online: www.chpower.com
Download from Www.Somanuals.com. All Manuals Search And Download.
30
Spray Guns
Siphon-Feed Detail Spray Gun
DH5500
• Provides full size pattern in a small package
• Nickel plated body provides easy clean-up
• Features both fluid and pattern controls
• Includes 8 fl. oz canister
AVG. SCFM Requirement @ 40 PSI
4.2
Pressure-Feed Spray Gun
DH3800
• Pressure-feed design sprays low to high
viscosity materials
• Ball burnished finish allows for easy clean-up
AVG. SCFM Requirement @ 40 PSI
2.0
Basic Spray Gun
DH3200
• Pressure-feed design sprays low to high
viscosity materials
• Bleeder design operates with most tankless
air compressors
• Fluid control regulates amount of
paint sprayed
AVG. SCFM Requirement @ 40 PSI
2.7
General Purpose Spray Gun
DH4200
• Changes from siphon to pressure-feed for use with a
variety of materials
• Convertible from non-bleeder to bleeder style for use
with standard or tankless air compressors
• Works with paint tanks and remote canisters
AVG. SCFM Requirement @ 40 PSI
2.0
Visit us online: www.chpower.com
Download from Www.Somanuals.com. All Manuals Search And Download.
32
Spray Guns
General Purpose Spray Gun
DH5300
• Easily changes from siphon to pressure-feed with the twist
of a knob for use with a variety of materials
• Pattern control adjusts fan size for better results
• Convertible from non-bleeder to bleeder style for use with
standard or tankless air compressors
• Works with paint tanks and remote canisters
AVG. SCFM Requirement @ 40 PSI
4.3
Pressure-Feed Spray Gun System
DH6600
• Remote canister allows spraying in tight areas for
better maneuverability
• Sprays in any position for added convenience
• Includes 2 qt. pressure canister, regulator and 6’
air and material hoses
7.0 AVG. SCFM Requirement @ 40 PSI
Air Brush Set
MP2900
• Paints fine lines for pin striping, graphics, detail-
ing, modeling, and more
• Dual action trigger allows the user to vary the
line width while spraying
• Includes a protective cap, 22cc cup, 5cc metal
cup, 60cc mix jar with lid, 6’ air hose with
adapter, hanger, and molded case
AVG. SCFM Requirement @ 40 PSI
.23
1
2 / Gallon Stainless Steel Paint Tank PT2813
2
• Bucket holds 2 1/2 gallons of paint for longer
spraying between refills
• Tank accepts 1 gallon paint can for
added convenience
• Compatible with most paint materials and solvents
• Includes tank pressure regulator, gauge, safety
valve, and 15’ material hose and air hose
Model
No.
DH5500
DH3800
DH3200
Fluid
Fluid tip Paint Viscosity
Range
Very Low-Med. Pattern/Material
Adjustment Fan Pattern Canister
Delivery Type (in./mm)
Controls
Size
Size
Siphon
Pressure
Pressure
.071/1.8
.050/1.3
.049/1.2
1.5-9
8 oz.
Low-High
Low-High
Low-High
Low-High
Low-High
Low
Material
Material
6.5
6.5
6.5
1- 8
1-9
---
1 qt.
1 qt.
DH4200 Pressure/Siphon .050/1.3
DH5300 Pressure/Siphon .050/1.3
Material
1 qt.
Pattern/Material
Pattern/Material
Material/Air
1 qt.
DH6600
MP2900
Pressure
Siphon
.039/1.0
2 qt.
.015/0.38
60cc,22cc,5cc
Or call CH Air Tools at: 1-800-543-6400
Download from Www.Somanuals.com. All Manuals Search And Download.
33
|