Cables to Go Network Card 29599 User Manual

USER GUIDE  
WIRELESS AV ADAPTER  
Model: 29599  
Download from Www.Somanuals.com. All Manuals Search And Download.  
INTRODUCTION  
Thank you for purchasing the TruLink™ Wireless AV Adapter. The TruLink Wireless AV Adapter works  
with a Certified Wireless USB Host Adapter to wirelessly stream video and audio from your computer to a  
remote monitor, projector, or television. Utilizing Ultra-Wide Band technology, the Wireless AV Adapter  
enables in-room wireless connectivity at distances up to 30 feet between the computer and the display  
equipment. This highly secure wireless connection is ideal for classroom or conference room  
presentations or to display content from your laptop to your home entertainment system. We  
recommend that you read this manual thoroughly and retain for future reference.  
2
Download from Www.Somanuals.com. All Manuals Search And Download.  
FEATURES  
Requires an existing USB Host Adapter (#28598 or #29578)-not included  
Video and Audio support in a single device adapter, delivered wirelessly from a computer to an  
external display  
Supports high resolution UXGA/WSXGA video and 3.5mm stereo audio  
Works in both extended desktop and dual monitor screen modes  
Supports native mode for playback of high resolution video  
Up to six computers can share one wireless display and speaker set*  
One computer can broadcast over six audio/video displays**  
Video streaming is supported up to 720p (720p only available at resolution 1024x768 or lower)  
In-room wireless connectivity up to 30ft  
Ultra-Wide Band operates in the frequency of 3.1GHz to 4.8GHz and 6.3GHz to 7.9GHz (WiMedia™  
Band Group 1&3)  
Certified Wireless™ USB 1.0 compliant  
WiMedia 1.0 MAC & 1.1 PHY compliant  
3
Download from Www.Somanuals.com. All Manuals Search And Download.  
SYSTEM REQUIREMENTS  
Microsoft® Windows® XP 32-bit with Service Pack 3 or higher; Microsoft® Vista® 32-bit/64-bit; or  
Windows 7 32-bit/64-bit  
Minimum Requirements (Office, Productivity, and Web applications)  
Windows XP-  
Processor: 1.66GHz Atom or Celeron  
Ram: 512MB  
Windows Vista/  
Windows 7-  
Overall WEI Score: 3.0 or better  
Processor: 1.4GHz Core2Duo or better  
Memory: 1GB  
Video Card: Any GPU  
Recommended Requirements (Full-Screen Video Playback)  
Windows XP-  
Processor: 1.8GHz Core2Duo or better  
RAM: 1GB  
Windows Vista/  
Windows 7-  
Overall WEI Score: 4.5 or better  
Processor: 2.4GHz Core2Duo or better  
Memory: 2GB  
Video Card: Intel GMA X4500, ATI Radeon HD3 series, NVidia GeForce 9 series or  
better  
You must also have administrative privileges on your PC to install the software package  
4
Download from Www.Somanuals.com. All Manuals Search And Download.  
PACKAGE CONTENTS  
Wireless AV Adapter  
One (1) Dipole Antenna  
3ft USB A Male/Mini-B Male Cable  
1ft VGA Male/Male Cable  
3ft 3.5mm Male/Male Cable  
3ft 3.5mm Male to 2 RCA Male Cable  
5V/2.5A Power Adapter  
Mounting Bracket  
Two (2) Self-Tapping Screws  
Quick Start Guide  
Driver CD w/Electronic User Guide  
5
Download from Www.Somanuals.com. All Manuals Search And Download.  
DEVICE OVERVIEW  
WIRELESS AV ADAPTER  
1. VGA: VGA Activity Indicator  
LED is solid when display cable is connected.  
LED is blinking when data is being transferred.  
2. PWR: Power Indicator  
LED is solid when power is applied.  
3. 1-2-3: Status Indicator  
Illuminated number/s indicates the wireless USB Host  
Adapter that is currently synced with the Wireless VGA with  
Integrated Audio Adapter.  
4. PWR plug  
Power adapter input  
5. Wireless/Wired switch  
Choose from wired or wireless mode by moving the switch.  
6. Reset  
Association history can be erased by pressing and holding  
this button for 10 seconds.  
7. Host Selection:  
This button is used to select a different Wireless USB
Adapter  
8. VGA/Audio Outputs  
HD15 and 3.5mm output connections for connecting t
video and audio source  
9. USB input  
In Wireless mode, this connector is used for cable  
association.  
In Wired mode, this connector is used for wired operation of  
the Wireless VGA with Integrated Audio Adapter  
6
Download from Www.Somanuals.com. All Manuals Search And Download.  
SOFTWARE/DEVICE INSTALLATION  
IMPORTANT NOTE:  
If installing on Windows XP, Service Pack 3 (SP3) is required. Verify that this has been  
installed before installing the Wireless AV Adapter software.  
Before installing the software, when using a Wireless USB host adapter make sure that it  
and the Wireless AV Adapter are not connected to the computer and the Wireless AV  
Adapter is not powered.  
STEP 1-INSTALLING THE SOFTWARE  
Insert the CD provided and the installer CD welcome screen will appear. Select the “Software Installation”  
from the menu.  
7
Download from Www.Somanuals.com. All Manuals Search And Download.  
SOFTWARE/DEVICE INSTALLATION  
This will take you to the TruLink Wireless USB Kit InstallShield Wizard.  
Click “Next” to go to proceed with the install.  
Read and accept the Wireless USB software License  
Agreement by clicking “Yes”.  
8
Download from Www.Somanuals.com. All Manuals Search And Download.  
SOFTWARE/DEVICE INSTALLATION  
Read and accept the License Agreement for the  
DisplayLink software.  
After the software installs, your installation is complete  
and you can hit the “Finish” button to exit the wizard.  
Important: reboot/restart if prompted.  
9
Download from Www.Somanuals.com. All Manuals Search And Download.  
SOFTWARE/DEVICE INSTALLATION  
STEP 2 (IF NECESSARY)-DRIVER INSTALLATION FOR THE WIRELESS USB HOST ADAPTER (SOLD SEPARATELY)  
1. Install your Wireless USB host adapter if you have not already done so. Please refer to your Wireless  
USB host adapter instructional guide or you may try to contact the manufacturer for the proper driver  
installation process.  
2. Your Wireless USB host software utility may create an icon in your icon tray. Double-click the icon on  
the icon tray at the bottom of your desktop to open the utility. Below is an example of the Wireless  
USB Manager utility icon.  
Figure: Wireless USB Manager  
The Wireless USB software utility will open and instruct you on what to do next.  
10  
Download from Www.Somanuals.com. All Manuals Search And Download.  
SOFTWARE/DEVICE INSTALLATION  
STEP 3 – DEVICE INSTALLATION FOR THE TRULINK WIRELESS AV ADAPTER  
The TruLink Wireless AV Adapter supports two association methods: Cable Association and Pin  
Association. Only one of these methods is necessary to complete installation. The instructions below  
describe steps for both methods, and how to use this adapter in Wired Mode. Please note that Pin  
Association is only recommended if using with a TruLink Wireless USB Host Adapter.  
Do the following before installation:  
Make sure the antenna is connected to the Wireless AV Adapter.  
Plug the supplied power adapter into your Wireless AV Adapter.  
Be certain your Wireless USB host adapter is connected to the PC and necessary software has  
been loaded.  
Connect the Wireless AV Adapter to your display using a VGA cable.  
CABLE ASSOCIATION  
1. Make sure the Wireless AV Adapter Wireless/Wired switch is on Wireless. Using the supplied USB  
cable, connect the USB mini-b connector to the Wireless AV Adapter USB mini-B port and USB A  
connector on the cable to an available USB port on your PC.  
2. A cable association window pop-up will ask you if you would like to accept the association. Accept the  
association and unplug the USB cable.  
3. Windows will automatically install the appropriate Wireless AV Adapter drivers and you will get another  
successful install message pop up verifying successful installation. The installation is now finished and  
your Wireless VGA is ready for use.  
11  
Download from Www.Somanuals.com. All Manuals Search And Download.  
SOFTWARE/DEVICE INSTALLATION  
PIN ASSOCIATION  
For Pin Association, it is strongly recommended that you use a TruLink Wireless USB Host Adapter, as  
some other Wireless USB host adapters may not support the feature. To pin associate with the TruLink  
Wireless USB Host Adapter, please do the following:  
1. Make sure the Wireless AV Adapter Wireless/Wired switch is on Wireless.  
2. Open the Wireless USB Manager, and click the Discovery button. The host adapter will look for the  
Wireless AV Adapter.  
3. Once the Wireless AV Adapter is located, you will get the PIN  
Association dialog box that prompts you to enter the PIN of the  
device. The default PIN of the TruLink Wireless AV Adapter is  
1234. This number may be changed and the procedure is  
described in the Appendix section of this guide. Enter the PIN  
and then click the Accept Association button.  
4. The necessary Wireless AV Adapter drivers will install  
automatically. The VGA Activity Indicator will light on, and you  
are now ready to use the adapter  
Figure: Pin Association Entry  
12  
Download from Www.Somanuals.com. All Manuals Search And Download.  
SOFTWARE/DEVICE INSTALLATION  
VERIFY CONNECTION  
To verify connection from Cable or PIN Association, you can open the Wireless USB host manager utility  
and you should have an icon displayed representing the TruLink Wireless AV Adapter.  
WIRED MODE  
Your Wireless AV Adapter can also be used wired mode.  
1. Position the WIRELESS/WIRED switch in the WIRED position.  
2. Plug the USB cable between your computer and the Wireless AV Adapter. If not already installed,  
Windows will automatically install the necessary drivers.  
3. If prompted to Accept Association, please do so, and then disconnect the USB cable. The function is  
the same as the wireless mode but data will be transferred through the USB cable and not use the  
Wireless USB host adapter. You are now ready to use your TruLink Wireless AV Adapter.  
13  
Download from Www.Somanuals.com. All Manuals Search And Download.  
USING THE WIRELESS AV ADAPTER  
WIRELESS VGA DISPLAY SETTINGS  
The TruLink Wireless AV Adapter hosts a number of various settings so that you may configure your  
image to the way you need it.  
After you have properly installed the Wireless AV Adapter, an icon representing a monitor will appear in  
your Windows icon tray. This is the TruLink DisplayLink Manager. From this utility, you can adjust your  
image settings. To open the manager, right click on the icon in the Windows tray (Figure: TruLink  
DisplayLink Manager). A menu (Figure: Display Settings Menu) will appear and you will have the  
possibility to change parameters such as resolution, color quality, mirror mode or extension mode and  
more.  
Figure: TruLink DisplayLink Manager  
14  
Download from Www.Somanuals.com. All Manuals Search And Download.  
USING THE WIRELESS AV ADAPTER  
NOTE: By default, your monitor will be set for the best resolution and will extend your screen to the right.  
Figure: Display Settings Menu  
15  
Download from Www.Somanuals.com. All Manuals Search And Download.  
USING THE WIRELESS AV ADAPTER  
MENU DESCRIPTIONS  
Screen Resolution  
This allows adjustment for your video’s display capable screen resolutions. Please note that if all the  
options appear from the range of 640x480~1680x1050, your monitor will most likely only accept what its  
maximum capability is. You may want to refer to your specification section of your display user guide to  
see the optimal resolution. If you are using a notebook, Screen Resolution will only be available in  
Extended mode, as in Mirror mode your additional display will mimic the settings of your main notebook  
monitor.  
Color Quality  
In this setting you can adjust the color bits between Medium (16-bit) and High (32-bit).  
Screen Rotation  
This setting allows you to leave the display screen in Normal viewing mode, Rotated Left, Rotated Right,  
or Upside-Down viewing.  
Extend To  
If you are using Extended mode you can utilize this option to extend the display to the Right, Left, Above,  
or Below depending on where your monitor is positioned.  
Extend  
In this mode you can “extend” your desktop space to an additional monitor so you can have more view of  
different applications.  
Mirror  
In this mode you can duplicate your main monitor onto an additional monitor.  
16  
Download from Www.Somanuals.com. All Manuals Search And Download.  
USING THE WIRELESS AV ADAPTER  
Advanced...  
This will allow you to go into the Display Properties settings and make adjustments to your display  
settings.  
17  
Download from Www.Somanuals.com. All Manuals Search And Download.  
USING THE WIRELESS AV ADAPTER  
AUDIO SETTINGS  
Upon connecting the Wireless AV Adapter, your audio output from your PC will be defaulted through it at  
50% listening level.  
By right-clicking on the audio icon in the systems icon tray, you can go to  
Adjust Audio Properties to make any audio adjustments as you would  
with any audio projection device.  
That will open up the Sounds and Audio Devices Properties  
screen and here you can make any adjustments. The name given  
to the audio output through the Wireless AV Adapter is USB  
Multimedia Audio Device.  
18  
Download from Www.Somanuals.com. All Manuals Search And Download.  
USING THE WIRELESS AV ADAPTER  
WIRELESS USB HOST ADAPTER SELECTION  
Your Wireless USB host adapter/s will have to go through the association process before they can be  
used with the TruLink Wireless AV Adapter. For more information about the association process, please  
refer to Appendix – Association with other devices.  
The “HOST” button on the Wireless AV Adapter is used to switch between Wireless USB host adapters.  
By pressing this button, the Wireless AV Adapter will look for the next associated Wireless USB host  
adapter in its list and connect to it. The 1-2-3 lights will move to the next position. The LED is scheme is  
as follows:  
Light  
On  
Off  
Off  
On  
Off  
On  
Light  
Off  
On  
Off  
On  
On  
Off  
Light  
Off  
Off  
On  
Off  
On  
On  
User 1  
User 2  
User 3  
User 4  
User 5  
User 6  
19  
Download from Www.Somanuals.com. All Manuals Search And Download.  
USING THE WIRELESS AV ADAPTER  
WIRELESS USB HOST ADAPTER RESET  
To erase all Wireless USB host adapters associated to your Wireless AV Adapter, hold down the  
“RESET” button for 10 seconds. This will cause the Wireless AV Adapter to erase all Wireless USB host  
adapters that have been associated from its list. Each Wireless USB host adapters will then have to be  
re-associated with the Wireless AV Adapter using one of the association processes (cable or pin  
association) in order to connect to the Wireless AV Adapter again.  
20  
Download from Www.Somanuals.com. All Manuals Search And Download.  
FREQUENTLY ASKED QUESTIONS  
1. Why can’t I install .NET?  
You may have an older version of .NET, preventing the newer one from being installed. Using  
Add/Remove Programs or Programs and Features on the Control Panel, uninstall any version of  
Microsoft .NET Framework™ older than version 2.0. Then install Microsoft .NET Framework™ from  
the Wireless VGA kit installer.  
2. My Wireless USB Host Adapter is plugged into my computer and my Wireless VGA Adapter is  
powered but I do not see anything on my display. What’s wrong?  
Check the Wireless USB Manager to see if there is an icon for your Wireless VGA Adapter. If there is  
no icon, try unplugging and then plugging in your Wireless USB Host Adapter to reload the Wireless  
VGA Adapter.  
If you see an icon that is grayed out in the Wireless USB Manager, try resetting the Wireless VGA  
Adapter by unplugging its power and plugging it back in. You should see the icon in the Wireless USB  
Manager appear in color when it is connected.  
Still not connected?  
Try adjusting the resolution from the TruLink DisplayLink manager. Some displays such as television  
type displays can be recognized as a default monitor and therefore your PC may set it as a default  
1280x1024 which can be too high for the monitor. If your monitor is not capable of displaying that  
resolution, you will need to lower the setting.  
21  
Download from Www.Somanuals.com. All Manuals Search And Download.  
FREQUENTLY ASKED QUESTIONS  
3. Why is my video choppy?  
If you are experiencing choppy video, try changing the channel (please refer to your Wireless USB  
host adapter settings for this) or move in your computer closer to the display.  
4. I see a blue screen or my desktop background on my display connected with the Wireless AV  
Adapter, but no icons. Is something wrong with my unit?  
No, your unit is working properly. The default setting of this device will extend your desktop on the  
additional display. With this function, you can grab icons or open applications on that display to make  
your overall viewing space larger. The default setting can be changed to Mirror mode, and with this  
setting you can duplicate the image from your main display or laptop screen to the additional display.  
5. I am having issues transmitting video during DVD playback when using Windows Media  
Player. Is my unit not working properly? If it is, how can this be fixed?  
Your unit is working properly. Although Windows Media Player works, it does not react well for all  
scenarios. Windows Media Player will only work on the display connected with the Wireless AV  
Adapter, when you make this your primary display. To make it your primary display, you should go to  
the “Settings” tab in your Windows Display Properties and click the DisplayLink Device monitor, and  
check “Use this device as the primary monitor”. Then go to your primary monitor and if “Extend my  
Windows desktop on the monitor” is checked, uncheck this option. Your image should now transmit  
to the display connected with the Wireless AV Adapter. Please note, this setup will not allow use of  
the original display. We recommend using a DVD based playback software if possible (i.e.  
PowerDVD, WinDVD) as these players have less playback issues, and your wireless display does not  
have to be primary.  
22  
Download from Www.Somanuals.com. All Manuals Search And Download.  
FREQUENTLY ASKED QUESTIONS  
6. My Wireless USB Host Adapter is plugged into my computer but I do not hear anything out of  
my speakers when connected through the Wireless AV Adapter. What’s wrong?  
Check the Wireless USB Manager to see if there is an icon for your Wireless AV Adapter. If there is  
no icon, try unplugging and then plugging in your Wireless USB Host Adapter to reload the Wireless  
AV Adapter.  
If you see an icon that is gray in the Wireless USB Manager, try resetting the Wireless AV Adapter by  
unplugging its power and plugging it back in. You should see the icon in the Wireless USB Manager  
appear in color when it is connected.  
Still not connected?  
If you are using an audio source such as an A/V receiver, make sure the receiver is on the right input  
channel or attempt troubleshooting with your audio output device equipment.  
23  
Download from Www.Somanuals.com. All Manuals Search And Download.  
VIDEO PLAYBACK TIPS  
1. We only recommend playing back video in “Extend” mode.  
2. Don’t switch between “Mirror” and “Extended” modes while video is being played on the wireless  
display. Doing this can confuse the video player which may cause it to stop its playback. We  
recommend stopping playback, and then switching viewing modes if needed. Then you can restart  
your playback.  
3. Avoid dragging video while playing from one display to another. The video may stop playback if this is  
done. To void this potential issue, open your media player on the wireless display, close the media  
player, and then re-open it. When you re-open it, the media player should open on the wireless  
display. From here, you can start playback of your video.  
4. Avoid changing the resolution of the wireless display while a video is being played back, as this can  
cause the image to move to another screen if one is connected.  
5.  
If you experience issues with QuickTime movie trailers, the solution is to disable DirectX in the  
QuickTime options menu. This can be found in the “Advanced” tab in the QuickTime player plug in  
settings.  
Please visit our website for these and other tips and frequently asked questions.  
24  
Download from Www.Somanuals.com. All Manuals Search And Download.  
TECHNICAL SPECIFICATIONS  
Systems Information  
Operating System  
Support:  
Microsoft XP 32-bit; Microsoft Vista 32-bit/64-bit  
Operating Range:  
PHY Data Rate:  
PHY Compliance:  
Frequency:  
Up to 30 feet (10 meters)  
53.3Mbps, 80Mbps, 106.6Mbps, 160Mbps,200Mbps, 320Mbps, 400Mbps, 480Mbps  
WiMedia 1.0 MAC & 1.1 PHY compliant & support for 1.2 PHY  
3.1GHz to 4.8GHz (WiMedia Band Group 1); 6.336~7.920 GHz (WiMedia Band Group 3)  
RF Modulation Type: QPSK/DCM  
Number of Channels: 7 Channels (3 FFI + 4 TFI)  
USB Specification:  
Security:  
Certified Wireless USB 1.0  
AES 128-bit  
Antenna Type:  
Omni-directional; SMA + I-PEX Dipole Antenna 81XXAA15.G05 (Type-A)  
Wireless AV Adapter Specs  
Chipset:  
RTU 7105 Module; DisplayLink DL-165G-video  
Interface:  
USB 2.0 mini-B female for wired association method; HD15 female video output; 3.5mm Stereo output  
Video Resolution:  
Video Streaming:  
Screen Mode:  
Color Depth:  
Audio Output:  
800x600 ~ 1920x1080  
Up to 720p (720p only available at resolution 1280x720 or lower)  
Extended and Mirror mode  
32-bit True Color  
2 CH DAC output  
Audio Sample Rate: 8KHz, 16KHz, 44.1KHz to 48KHz with 16-bit resolution  
Association Mode:  
Pre-Association, Cable Association and PIN Association;  
Stores up to 16 associated hosts  
Native Mode:  
Reset Switch:  
For playback of high resolution video  
Used for erasing association history by pressing and holding the button for 10 seconds  
Environmental Specs  
Work Environment: Operation Temperature: 10~40 degrees (Celsius)  
Storage Temperature:-10~60 degrees (Celsius)  
Power Information  
Power Consumption: 3.3W  
Max Output Power: -41.3 dBm/MHz  
Power Adapter:  
5V, 2.5A; 100-240VAC 50-60Hz 0.5A  
25  
Download from Www.Somanuals.com. All Manuals Search And Download.  
CABLES TO GO™ WARRANTY STATEMENT  
At Cables To Go, we want you to be totally confident in your purchase. That is why we offer a one year  
warranty on this device. If you experience problems due to workmanship or material defect for the  
duration of this warranty, we will repair or replace this device. To request a Return Merchandise  
Cables To Go  
3555 Kettering Blvd.  
Moraine, OH 45439  
1-800-826-7904  
26  
Download from Www.Somanuals.com. All Manuals Search And Download.  
IMPORTANT SAFETY INFORMATION  
! Do not plug the unit in any outlet that does not have enough current to allow the device to function. Refer to the  
specifications in this manual for power level of the unit.  
! Liquid:  
If this unit or its corresponding power adapter has had liquid spilled on or in it, do not attempt to use the unit.  
Do not attempt to use this product in an outdoor environment as elements such as rain, snow, hail, etc. can damage the  
product.  
! In case of a storm, it is recommended that you unplug this device from the outlet.  
! Avoid placing this product next to objects that produce heat such as portable heaters, space heaters, or heating ducts.  
! THERE ARE NO USER SERVICEABLE PARTS  
Do not attempt to open this product and expose the internal circuitry. If you feel that the product is defective, unplug the  
unit and refer to the warranty information section of this manual.  
©2009.Cables To Go is a trademark of Cables To Go. Microsoft and XP/Vista are either registered trademarks or  
trademarks of Microsoft Corporation in the United States and/or other countries. This product is not endorsed or  
manufactured by Microsoft Corporation.  
WiMedia is a registered trademark of the WiMedia Alliance. This product is not manufactured by WiMedia Alliance.  
27  
Download from Www.Somanuals.com. All Manuals Search And Download.  
APPENDIX  
CABLE ASSOCIATION WITH OTHER DEVICES  
ASSOCIATION CONCEPT  
In order to establish a secure wireless connection, both your Wireless USB host adapter and the Wireless  
AV Adapter must exchange information about each other. This is done via cable or PIN association.  
ASSOCIATION PROCESS  
If you purchase additional Certified Wireless USB Host Adapters, such as the TruLink Wireless USB Host  
Adapter, you will need to associate them with your Wireless AV Adapter. Refer to your Wireless USB  
device documentation for more information on its settings for association or try contacting the product’s  
manufacturer for assistance if needed.  
28  
Download from Www.Somanuals.com. All Manuals Search And Download.  
APPENDIX  
CABLE ASSOCIATION PROCEDURE  
Cable association steps- Examples/Figures shown used with the association of the TruLink Wireless AV  
Adapter when used with the TruLink Wireless USB Host Adapter. This process will vary by manufacturer  
of your Wireless USB host adapter.  
1. Make sure that the Wireless USB host adapter utility is running. Check your Windows tray for the  
Wireless USB Manager icon (Figure: Wireless USB Manager).  
2. Make sure the WIRELESS/WIRED switch is in the WIRELESS position  
3. Plug in the power adapter for your TruLink Wireless AV Adapter.  
4. Connect the USB cable between an available USB port on your computer and your Wireless AV  
Adapter.  
5. Complete cable association by pressing the “Accept Association” button when prompted. (Figure:  
Cable Association)  
6. Remove the USB cable from your Wireless USB Device Adapter and computer.  
Figure: Cable Association  
29  
Download from Www.Somanuals.com. All Manuals Search And Download.  
APPENDIX  
Associated Certified Wireless USB Devices will appear as  
icons in the Wireless USB Manager. When the Certified  
Wireless USB Devices are connected, the icon will appear in  
color (Figure: Wireless AV Adapter Connected).  
Figure: Wireless AV Adapter Connected  
Note: You may rename or delete the Wireless USB Device by right-clicking the device icon in the  
Wireless USB Manager and select “rename” or “delete”.  
30  
Download from Www.Somanuals.com. All Manuals Search And Download.  
APPENDIX  
PIN ASSOCIATION PROCEDURE  
PIN association steps: Examples/Figures shown used with the association of the TruLink Wireless AV  
Adapter when used with the TruLink Wireless USB Host Adapter.  
1. Make sure your Wireless AV Adapter is powered on and  
your Wireless USB host adapter is connected to your  
computer. Click the “Discovery Mode” button (Figure:  
Discovery Mode Screen).  
Figure: Discovery Mode Screen  
31  
Download from Www.Somanuals.com. All Manuals Search And Download.  
APPENDIX  
2. The Wireless USB host will search for the Wireless AV  
Adapter within its range. Note that this operation can take  
up to 20 seconds (Figure: Discovery Mode in Process).  
Figure: Discovery Mode in Process  
3. Once the Wireless USB host adapter and the Wireless AV  
Adapter have exchanged security information, the following  
dialog will appear.  
Figure: Pin Association Entry  
32  
Download from Www.Somanuals.com. All Manuals Search And Download.  
APPENDIX  
4. Enter the PIN of the Wireless VGA Adapter (4-digit PIN) and click Accept Association. The Wireless  
VGA Adapter and Wireless USB Host Adapter are now associated and ready for operation.  
PIN CHANGE PROCEDURE  
The default PIN setting for the Wireless AV Adapter is “1234”. This section gives you the instructions to  
change the PIN to another 4-Digit value.  
IMPORTANT: The application used to change the PIN is not supported in Vista 64bit.  
1. Make sure your Wireless USB Host Adapter and the Wireless VGA with Integrated Audio Adapter is  
not connected to your computer.  
2. Open/Launch the application “Pin Update” (C:\Program Files\Wireless USBManager\Utility\PINUpdate).  
The following dialog will appear:  
33  
Download from Www.Somanuals.com. All Manuals Search And Download.  
APPENDIX  
3. Make sure the WIRELESS/WIRED switch on your Wireless AV Adapter is in the WIRELESS position  
and the power cable is plugged in your Wireless VGA Adapter. Connect the USB cable between your  
Wireless AV Adapter and any available USB port on your computer.  
34  
Download from Www.Somanuals.com. All Manuals Search And Download.  
APPENDIX  
4. Click Install this driver software anyway.  
5. To change pin, click “Change PIN”  
35  
Download from Www.Somanuals.com. All Manuals Search And Download.  
APPENDIX  
6. Enter a 4-Digit PIN (0-9) and click OK.  
7. If your PIN is valid, a window displaying your new PIN will appear. Press OK. Your PIN has been  
successfully changed. IMPORTANT: please exit the Trulink PIN Utility application (Exit button as  
shown on figure in step 5) before unplugging the USB cable between your Wireless VGA Adapter and  
your PC.  
36  
Download from Www.Somanuals.com. All Manuals Search And Download.  
37  
Download from Www.Somanuals.com. All Manuals Search And Download.  
For more information on this product or to check for updated drivers,  
manuals or frequently asked questions please visit our website.  
VER. 1.0.12.7.09  
Download from Www.Somanuals.com. All Manuals Search And Download.  

Belkin Network Router 8820nt00378_F7D4301_v1 User Manual
Black Decker Laser Level BDL400S User Manual
Bose Furnace AM331087 User Manual
Briggs Stratton Pressure Washer 195764GS User Manual
Campbell Hausfeld Air Compressor HL410188 User Manual
Canon All in One Printer 4502B017 User Manual
Canon All in One Printer 6226B002 User Manual
Carson Switch SB 008 User Manual
Casio Watch TSQ 1200 User Manual
Char Broil Charcoal Grill 463411512 User Manual