RV 701 SS - Dual Fuel Cooker
Manual for Installation, Use and Maintenance
GB
Customer Care Department • The
Group Ltd. • Harby Road • Langar • Nottinghamshire • NG13 9HY
Download from Www.Somanuals.com. All Manuals Search And Download.
3
Features and Technical Data
Gas Burners
1. Auxiliary burner (A)
2. Semi-Rapid burner (SR) 1,75 kW
3. Rapid burner (R) 3,00 kW
1,00 kW
4. Triple Ring burner (TR) 3,50 kW
Note:
The electric ignition is incorporated in the knobs.
The appliance has a safety valve system fitted, the flow of gas will be stopped if and when the flame should
accidentally go out.
4
1
2
2
3
Conventional Oven
Fan Oven
Fig. 1
Download from Www.Somanuals.com. All Manuals Search And Download.
4
Control Panel
Controls Description
1. Front right rapid burner control knob (3)
2. Rear right semi-rapid burner control knob (2)
3. Central triple-ring burner control knob (4)
4. Rear left semi-rapid burner control knob (2)
5. Front left auxiliary burner control knob (1)
6. Conventional oven thermostat knob (top oven)
7. Conventional oven switch knob (top oven)
8. Fan oven switch/thermostat knob (bottom main oven)
9. Electronic programmer (bottom main oven only)
Pilot lamps:
10. Bottom main oven temperature indicator light
11. Top oven temperature indicator light
Please note: This appliance incorporates a safety cooling fan which you will hear operating whenever
the oven or grill are in use. The cooling fan may also operate when the oven is switched off. This fan is to
reduce the external temperature of the appliance and cool the internal components.
10
11
Fig. 2
9
8
7
6
5
4
3
2
1
Download from Www.Somanuals.com. All Manuals Search And Download.
5
Clock and Timer with “Touch-Control” Keys
(Bottom Main Oven only)
Keys:
+ and – Touched simultaneously (for more than 2 seconds):
• setting the clock;
• setting the timer volume (by touching once, along
with the “MODE” key);
• to cancel automatic cooking at any time.
MODE
Function selection (touched for more than
seconds):
2
• setting the clock (only after first connection or after
a power failure);
Fig. 3
• timer;
• automatic cooking “dur” (duration) - how long the
food will take to cook (by touching the “MODE” key
again);
• automatic cooking “End” - the time you would like
the oven turns off (by touching the “MODE” key
two more times);
+
–
Increases the number shown on the display
Decreases the number shown on the display
Illuminated Symbols:
AUTO
AUTO
flashing - Automatic cooking completed, oven in automatic position but not set
steady illumination - Oven set for automatic cooking, cooking still not taking place
flashing - Timer being set
“
“
“
“
“
”
”
steady illumination - Timer in operation
”
steady illumination - Oven set for manual cooking
” and AUTO AUTO flashing - Automatic cooking being set
” and AUTO steady illumination - Oven set for automatic cooking, cooking taking place.
Download from Www.Somanuals.com. All Manuals Search And Download.
6
“Touch-Control” Keys
The “touch-control” keys shall be operated by the fingers (just by touching the key). When using touch
controls it is best to use the ball of your finger rather than the tip.
The keys are automatically deactivated:
- 8 seconds after the last selection; the deactivation is indicated by an acoustic signal (“beep”).
To reactivate just touch the “MODE” key or the “+” and “–” keys.
Setting the Clock
When first connected, or after a power failure, the digits and “AUTO” will shown on the display. To set the
clock, touch the “MODE“ key, for more than 2 seconds, and then the “+” or “–” keys.
Important: The oven does not operate, in manual cooking, without first having set the clock.
To set the clock, with the appliance already connected, touch the “+” and “–” keys simultaneously (for
more than 2 seconds), then “+” or “–” keys.
Important: - changing the time will delete any automatic program;
- after setting the clock, the oven starts to operate in the selected function
(manual cooking). The “
” symbol is steady illuminated.
Using the Timer
You can use the timer at any time, even when the oven is not in use. The timer does not turn the oven
off.
The timer can be set for up to 23 hours and 59 minutes.
- To set the timer, touch the “MODE” key for more than 2 seconds (the “ ” symbol flashes), than the “+”
or “–” keys.
- After about 8 seconds an acoustic signal (“beep”) will sound confirming the regulation (“ ” symbol
steady illuminated).
- To check the remaining time touch the “MODE“ key for more than 2 seconds. If the remaining time is
more than a minute the display will show hours and minutes; if less than a minute the display will show
seconds.
- When the time is up, the timer will beep. Touch the “MODE” key , for more then 2 seconds, to turn it
off; or press the “+” or “–” key to stop the beep and than the “MODE” key, for more than 2 seconds, to
deactivate the “ ” symbol flashing on the display.
- Turn off the oven manually (function and thermostat knobs in the off position) if the manual cooking
has been completed.
Setting the Timer Volume
You can select from three volume levels.
- Touch the “+” and “–” keys simultaneously for more than 2 seconds.
- Touch the “MODE” key; you can read on the display the current timer volume (“ton1”, “ton2” or
“ton3”).
- Touch the “–” key to listen or change the timer volume.
- Timer volume activated: the last displayed.
- After about 8 seconds an acoustic signal (“beep”) will sound confirming the volume setting; then the
time of day will be displayed.
Download from Www.Somanuals.com. All Manuals Search And Download.
7
Automatic Cooking
Use automatic cooking to automatically turn the oven on, cook, and then turn the oven off.
1. Check the clock shows the correct time.
2. Select the function and temperature (function and temperature knobs). The oven will come on.
3. Decide how long the food will take to cook, allowing time for preheating if necessary.
4. Touch the “MODE” key for more than 2 seconds and then touch again. “dur” will show (duration).
Using the “+” and “–” keys, set the stop time.
5. Decide the time you would like the oven to turn off; touch the “MODE” key for more than 2 seconds
and then touch it two times again. “End” will show. Using the “+” and “–” keys, set the stop time.
Note: While “dur” is displayed you can change to “End” just by touching one time the “MODE” key
(within 8 seconds from the last selection).
If there is time to wait before cooking starts, the current time of day and “AUTO” will show in the clock
display. The oven will switch off but is now set for automatic cooking.
If you are already at home to turn the oven on and only want the oven to turn off automatically, start
cooking as normal, then follow step 4 or step 5 to set a time to stop the oven.
When automatic cooking starts, “ ” will be displayed and the oven will turn on.
- To see the remaining cook time, follow step 4 up to display “dur” (duration).
- To see the set stop time, follow step 5 up to display “End”.
- To cancel automatic cooking at any time, touch the “+” and “–” keys simultaneously (for more than 2
seconds) and turn the temperature and function knobs to the off position.
When the stop time is reached, the oven will turn off, the timer will beep and “AUTO” will flash:
- Touch any key to stop the beeping.
- Touch the “MODE” key, for more than 2 seconds, to return the oven to the manual mode (“ ” symbol
steady illuminated on the display).
- Turn the temperature and function knobs to the off position.
Attention: after a power failure any automatic program is deleted. Turn off the oven
manually.
Download from Www.Somanuals.com. All Manuals Search And Download.
8
How to Use the Hob Burners
Hob Burners
Each hob burner is controlled by a separate gas valve operated
by a control knob (fig. 4) which has 3 positions marked on the
control panel, these are:
– Symbol
: Tap closed (burner off)
– Symbol
– Symbol
: High (maximum)
: Low (minimum)
Push in and turn the knob anti-clockwise to the selected
position.
The maximum aperture position permits rapid boiling of liquids,
whereas the minimum aperture position allows slower warming
of food or maintaining boiling conditions of liquids.
To reduce the gas flow to minimum, rotate the knob further anti-
clockwise to point the indicator towards the small flame symbol.
Other intermediate operating adjustments can be achieved by
positioning the indicator between the maximum and minimum
aperture positions, not between the maximum aperture and
closed positions.
Fig. 4
Note: When the hob is not being used, set the gas knobs to their closed positions and also close
the cock valve on the gas bottle or the main gas supply line.
Lighting of the Hob Burners
To ignite the burner, the following instructions are to be followed:
1 - Press in the corresponding knob and turn counter-clockwise to the full flame position marked by the
symbol (fig. 4) and hold the knob in until the flame has been lit.
In the case of a mains failure light the burner with a match or lighted taper.
2 - Wait about ten seconds after the gas lighting before releasing the knob (starting time for the valve).
3 - Adjust the gas valve to the desired power.
Important
If the burner flame should go out for some reason, the safety valve will automatically stop the gas flow.
To re-light the burner, return the knob to the closed position, wait for at least 1 minute and then repeat
the lighting procedure.
If your local gas supply makes it difficult to light the burner with the knob set to maximum, set the knob
to minimum and repeat the operation.
Download from Www.Somanuals.com. All Manuals Search And Download.
9
Choice of Burner
The burner must be choosen according to the diameter of the
pans and energy required. Saucepans with handles which are
excessively heavy, in relationship to the weight of the pan, are
safer as they are less likely to tip. Pans which are positioned
centrally on burners are more stable than those which are offset.
It is far safer to position the pan handles in such a way that they
cannot be accidentally knocked.
Fig. 5
When deep fat frying fill the pan only one third full of oil.
DO NOT cover the pan with a lid and DO NOT leave the pan unattended.
In the unfortunate event of a fire, leave the pan where it is and turn off all
con trols. Place a damp cloth or correct fitting lid over the pan to smother
the flames.
Do not use pans
with concave or
convex bases.
DO NOT use water on the fire.
Leave the pan to cool for at least 30 minutes.
Burner Size
Auxiliary
Semi-Rapid
Rapid
Minimum Pan Diameter (cm) Maximum Pan Diameter (cm)
12
16
24
26
-
14
24
26
28
36
Triple Ring
Wok
Correct Use of Triple Ring Burner
The flat-bottomed pans are to be placed directly onto the pan-support.
To use the WOK you need to place the proper stand in order to avoid any faulty operation of the triple-
ring burner (Figs. 6 - 7).
Important: The wok pan stand (fig. 7) MUST BE PLACED ONLY over the pan-rest for the triple-ring
burner.
WRONG
CORRECT
Fig. 6
Fig. 7
Download from Www.Somanuals.com. All Manuals Search And Download.
10
How to Use the Fan Oven (Bottom Main Oven)
General Features
Attention:
The oven door
becomes very hot
during operation.
Fan cooking is more economical and quicker than cooking in a conventional
oven.
The moving hot air surrounds the food and penetrates it more quickly than
in a conventional oven.
The oven is equipped with a circular element (2200 W) and a fan.
Note:
Upon first use, it is advisable to operate the oven at the maximum temperature (thermostat knob on
position 250) for 60 minutes to eliminate any traces of grease from the electrical resistance.
Operating Principles
Heating and cooking in this oven are obtained by forced convection.
A fan sucks in the air contained in the oven muffle, which sends it through the circular heating element
and then sends it back through the muffle. Before the hot air is sucked back again by the fan to repeat the
described cycle, it envelops the food in the oven, provoking a complete and rapid cooking.
It is possible to cook several dishes simultaneously.
IMPORTANT
To open the bottom door operate as indicated in fig. 8.
WARNING:
The door is hot, use the handle.
ATTENTION - MOST IMPORTANT
Pay special attention not to touch the hot heating element
inside the oven cavity.
Fig. 8
Download from Www.Somanuals.com. All Manuals Search And Download.
11
Switch and the Temperature Selector
Rotate the knob clockwise to set the oven for one of the following functions:
Off as per fig. 9
Only the oven fan is on.
The fan operates without the heating element, this function can be used for
defrosting.
50 to 250 The oven light is switched on.
The oven temperature can be set between 50°C - 250°C.
The set temperature has been reached when the temperature indicator light 250 goes
off.
Several different meals may be cooked simultaneously on various shelves, as the heated
air circulates evenly throughout the oven.
The hot air system cooks more quickly than conventional static system, therefore the
temperature should be set 15°C - 20°C below the values recommended in your recipe
books.
Fig. 9
Download from Www.Somanuals.com. All Manuals Search And Download.
12
Cooking Advice
Sterilization
Sterilization of foods to be conserved, in full and hermetically sealed jars, is done in the following way:
a - Set the selector knob to position 185 °C and preheat the oven.
b - Fill the dripping pan with hot water.
c - Set the jars onto the dripping pan making sure they do not touch each other and the door and set the
knob to position 135 °C.
When sterilization has begun, that is, when the contents of the jars start to bubble, turn off the oven
and let cool.
Regeneration
Set the selector knob to position 150° C.
Bread becomes fragrant again if wet with a few drops of water and put into the oven for about 10 minutes
at the highest temperature.
Roasting
To obtain classical roasting, it is necessary to remember:
– that it is advisable to maintain a temperature between 180° and 200 ° C.
– that the cooking time depends on the quantity and the type of foods.
Oven Cooking
Before introducing the food, preheat the oven to the desired temperature.
For a correct preheating operation, it is advisable to remove the tray from the oven and introduce it
together with the food, when the oven has reached the desired tem¬perature.
Check the cooking time and turn off the oven 5 minutes before the theoretical time to recuperate the
stored heat.
Simultaneous Cooking of Different Foods
The fan consents a simultaneous heterogeneous cooking of different foods. Different foods such as fish,
cake and meat can be cooked together without mixing the smells and flavours together. This is possible
since the fats and vapours are oxidized while passing through the electrical element and therefore are not
deposited onto the foods.
The only precaution to follow are:
– The cooking temperatures of the different foods must be as close to as possible, with a maximum
difference of 20° - 25 °C.
– The introduction of the different dishes in the oven must be done at different times in relation to the
cooking times of each one.
– The time and energy saved with this type of cooking is obvious.
Download from Www.Somanuals.com. All Manuals Search And Download.
13
How to Use the Convection Oven (Top Oven)
General Features
Attention:
The convection oven is equipped with 3 electrical heating elements:
– 2 elements (upper and lower) for normal oven cooking
– 1 grill element, on the top of the oven, for grilling which must be done
with the oven door closed.
The oven door
becomes very hot
during operation.
The input of the elements is:
– Upper element, 700 W
– Lower element, 1000 W
– Grill element, 2000 W
Note:
Upon first use, it is advisable to operate the oven at the maximum temperature (thermostat knob on
position MAX) for
60 minutes in the position
and for another 15 minutes in the
mode in order to eliminate any traces
of grease from the electrical resistances.
Operating Principles
Heating and cooking in the CONVENTIONAL oven are obtained in the following ways:
a. by normal convection
The heat is produced by the upper and lower heating elements.
b. by radiation
The heat is radiated by the infra red grill element (use with the oven door closed).
WARNING:
The door is hot, use the handle.
ATTENTION - MOST IMPORTANT
Pay special attention not to touch the hot heating element inside the oven cavity.
Download from Www.Somanuals.com. All Manuals Search And Download.
14
Thermostat Knob (fig. 11)
This only sets the cooking temperature and does not switch the oven on. Rotate clockwise until the
required temperature is reached (from 50° C to MAX).
The light between the thermostat and the function selector will illuminate when the oven is switched on
and turns off when the oven reaches the correct temperature.
The light will cycle on and off during cooking in line with the oven temperature.
Function Selector Knob (fig. 10)
Rotate the knob clockwise to set the oven for one of the following functions.
Fig. 10
Fig. 11
Oven Light
The oven is equipped with a light that illuminates the oven to enable visually controlling the food that is
cooking.
This light is controlled by the function selector knob (fig. 10).
It remains on in all the cooking modes.
Traditional Convection
The upper and lower heating elements are switched on. The heat is diffused by natural convection and the
temperature must be regulated between 50° C and MAX position with the thermostat knob.
It is necessary to preheat the oven before introducing the foods to be cooked.
Recommended for:
For foods which require the same cooking temperature both internally and externally, i. e. roasts, spare
ribs, meringue, etc.
Download from Www.Somanuals.com. All Manuals Search And Download.
15
Lower Heating element
In this position only the lower element is switched on. Heat is distributed by natural convection. The
thermostat can be set between 50 and 150°C; higher temperatures are not available.
Recommended for:
This mode is particularly suitable to complete cooking of dishes that require higher temperature at the
bottom.
Upper Heating
In this position only the upper element is switched on. Heat is distributed by natural convection. The
thermostat can be set between 50 and 150°C; higher temperatures are not available.
Recommended for:
This mode is particularly suitable to complete cooking of dishes that require higher temperature at the top.
Grilling
The infra-red heating element is switched on. The heat is diffused by radiation.
Use with the oven door closed and the thermostat knob to between 50°C and 200°C.
For correct use see chapter “USE OF THE GRILL”
Before using the grill, preheat for about five minutes.
Always grill with the oven door closed and do not use the grill for longer than 30 minutes at any one
time.
Caution: The oven door becomes very hot during operation.
Keep children well out of reach.
Recommended for:
Intense grilling action for cooking with a broiler; browning, crisping, “au gratin”, toasting, etc.
Use of the Grill
Leave to warm up for approximately 5 minutes with the door closed. Place the food inside positioning
the rack as near as possible to the grill. Insert the drip pan under the rack to collect the cooking juices.
Grilling with the oven door closed.
Grilling with the oven door closed and do not for longer than 30 minutes at any one time.
Attention: the oven door becomes very hot during operation. Keep children away.
Oven Cooking
Before introducing the food, preheat the oven to the desired temperature.
For a correct preheating operation, it is advisable to remove the tray from the oven and introduce it
together with the food, when the oven has reached the desired temperature.
Check the cooking time and turn off the oven 5 minutes before the theoretical time to recuperate the
stored heat.
Download from Www.Somanuals.com. All Manuals Search And Download.
16
Do’s and do not’s
– Do always grill with the oven door closed.
– Do read the user instructions carefully before using the cooker for first time.
– Do allow the oven to heat for one and a half hours, before using for the first time, in order to expel any
smell from the new oven insulation, without the introduction of food.
– Do clean your oven regularly.
– Do remove spills as soon as they occur.
– Do always use oven gloves when removing food shelves and trays from the oven.
– Do not allow children near the cooker when in use.
– Do not allow fat or oils to build up in the oven trays, or oven base.
– Do not place cooking utensils or plates directly onto the oven base.
– Do not grill food containing fat without using the grid.
– Do not cover the grilling grid with aluminium-foil.
– Do not use the oven tray for roasting.
– Do not place hot enamel parts in water. Leave them to cool first.
– Do not allow vinegar, coffee, milk, saltwater, lemon or tomato juice to remain in con¬tact with enamel
parts (inside the oven and on the oven tray).
– Do not use abrasive cleaners or powders that will scratch the surface of the stainless steel and the
enamel.
– Do not attempt to repair the internal workings of your cooker.
– Do remove the protective film before the first use.
– Fire risk! Do not store flammable material in the ovens.
Download from Www.Somanuals.com. All Manuals Search And Download.
17
For Your Safety
– The product should only be used for its intended purpose which is for the cooking of domestic
foodstuffs.
– Under no circumstances should any external covers be removed for servicing or maintenance except by
suitably qualified personnel.
– Attention: The appliance gets very hot, mainly around the cooking areas. It is very important
that children are not left alone in the kitchen when you are cooking.
– Household appliances are not intended to be played with by children.
– Keep children away from the appliance during use.
– Children, or persons with a disability which limits their ability to use the appliance, should have a
responsible person to instruct them in its use. The instructor should be satisfied that they can use the
appliance without danger to themselves or their surroundings.
– Do not operate your appliance by means of an external timer or separate remote-control system.
Important Notes
Installation, and any demonstration, information or adjustments are not included in the warranty.
The cooker must be installed by a suitably qualified and registered person in accordance with the relevant
Standards.
Download from Www.Somanuals.com. All Manuals Search And Download.
18
Care and Maintenance
Important:
As a safety measure, before you start cleaning the cooker be sure to disconnect it from the mains supply.
- Do not use cleaning products with a chlorine or acidic base.
- Do not use a steam cleaner because the moisture can get into the appliance thus make it
unsafe.
- The use of suitable protective clothing/gloves is recommended when handling or cleaning of
this appliance.
WARNING
When correctly installed, your product meets all safety requirements laid down for this type of product
category.
However special care should be taken around the rear or the underneath of the appliance as these areas are
not designed or intended to be touched and may contain sharp or rough edges, that may cause injury.
Flexible Tube
From time to time, check the flexible tube connecting the gas supply to the cooker.
It must be always in perfect condition; in case of damage arrange for it to be replaced by a suitably qualified
and registered installer.
Gas Taps
If a tap becomes stiff, do not force; contact your Local Service Centre.
Cleaning the Hob
Spillage on the hob can usually be removed by a damp soapy cloth. More obstinate stains can be removed
by rubbing gently with a soapy nylon (non metal) scouring pad or mild household cleaner.
Enamelled Parts
All the enamelled parts must be cleaned with a sponge and soapy water only or other non-abrasive
products.
Dry preferably with a micro fibre or soft cloth.
Download from Www.Somanuals.com. All Manuals Search And Download.
19
Stainless Steel, Aluminium, Painted Parts and Silk-screen Printed Surfaces
Clean using an appropriate product. Always dry thoroughly.
Stainless steel surfaces: can be cleaned with an appropriate stainless steel cleaner.
IMPORTANT: these parts must be cleaned very carefully to avoid scratching and abrasion. You are advised to use
a soft cloth and neutral soap.
CAUTION: Do not use abrasive substances or non-neutral detergents as these will irreparably damage
the surface.
Glass Control Panel
Clean using an appropriate product. Always dry thoroughly.
Do not use harsh abrasive cleaners or sharp metal scrapers to clean the control panel since they can scratch the
surface, which may result in shattering of the glass.
Download from Www.Somanuals.com. All Manuals Search And Download.
20
Burners and Grids
– These parts can be removed and cleaned with appropriate products.
– After cleaning, the burners and their flame spreaders must be well dried and correctly replaced.
– It is very important to check that the burner flame spreader and the cap have been correctly positioned.
Failure to do so can cause serious problems.
– Check that the electrode “S” (figs. 12-14) is always clean to ensure trouble-free sparking.
– Check that the sensor “T” (figs. 12-14) next to each burner is always clean to ensure correct operation
of the safety valves.
– Both the sensor and ignition plug must be very carefully cleaned.
– Note: To avoid damage to the electric ignition do not use it when the burners are not in
place.
Correct Positioning of the Burners (Auxiliary, Semi-Rapid and Rapid Burners)
– It is very important to check that the burner flame spreader “F” and the cap “C” have been correctly
positioned (see figs. 12 and 13). Failure to do so can cause serious problems.
C
F
Ignitor “S”
Sensor “T”
Fig. 12
Fig. 13
Download from Www.Somanuals.com. All Manuals Search And Download.
21
Correct Position of Triple Ring Burner
The triple ring burner must be correctly positioned (see fig. 14); the burner ribs must be fitted in their
housing as shown by the arrow.
The burner correctly positioned must not rotate (fig. 15).
Then position the cap “A“ and the ring “B“ (figs. 15 - 16)
Sensor “T”
Ignitor “S”
Fig. 14
A
B
Fig. 15
Fig. 16
Download from Www.Somanuals.com. All Manuals Search And Download.
22
Assembling and Dismantling of the Side Runner Frames
– Assemble the wire racks to the oven walls using the 2 screws (Figs. 17a - 17b).
– Slide the tray and rack into the runners (Figs. 18a - 18b). The rack must be fitted so that the safety catch,
which stops it sliding out, faces the inside of the oven.
– To dismantle, operate in reverse order.
TOP OVEN
BOTTOM
MAIN OVEN
Fig. 17a
Fig. 17b
Fig. 18a
Fig. 18b
Download from Www.Somanuals.com. All Manuals Search And Download.
23
Inside of Oven
The oven should always be cleaned after use when it has cooled down.
The cavity should be cleaned using a mild detergent solution and warm water. Suitable proprietary
chemical cleaners may be used after first consulting with the manufacturers recommendations and testing
a small sample of the oven cavity. Abrasive cleaning agents or scouring pads/cloths should not be used
on the cavity surface.
NOTE: The manufacturers of this appliance will accept no responsibility for damage caused by chemical
or abrasive cleaning.
Let the oven cool down and pay special attention no to touch the hot heating elements inside
the oven cavity.
Replacing the Halogen Oven Light
WARNING: Ensure the appliance is switched off before replacing the lamp to avoid the
possibility of electric shock.
– Let the oven cavity and the heating elements to cool down;
– Switch off the electrical supply;
– Remove the protective cover C (fig. 19);
– Replace the halogen lamp B with a new one suitable for high temperatures
having the following specifications: 230V and same power (check watt
power as stamped in the lamp itself) of the replaced lamp.
IMPORTANT WARNING: Never replace the bulb with bare hands;
contamination from your fingers can cause premature failure.
WRONG
Always use a clean cloth or gloves.
– Refit the protective cover;
Note: Oven bulb replacement is not covered by your guarantee.
CORRECT
C
B
Fig. 19
Download from Www.Somanuals.com. All Manuals Search And Download.
24
Top Oven Door
Removing the Oven Door
The oven door can easily be removed as follows:
– Open the door to the full extent (fig. 20a).
– Open the lever A completely on the left and right hinges (fig.
20b).
– Hold the door as shown in fig. 20.
– Gently close the door (fig. 20c) until left and right hinge levers
A are hooked to part B of the door (fig. 20b).
– Withdraw the hinge hooks from their location following arrow
C (fig. 20d).
Fig. 20a
– Rest the door on a soft surface.
A
A
– To replace the door, repeat the above steps in reverse order.
B
Fig. 20b
Fig. 20c
C
Fig. 20
Fig. 20d
Download from Www.Somanuals.com. All Manuals Search And Download.
25
Cleaning the Panes of Glass
Do not use harsh abrasive cleaners or sharp metal scrapers to
clean the oven door glass since they scratch the surface, which
may result in shattering of the glass.
Removing the Inner Pane of Glass
The oven door has two panes. To clean these, you need to remove
the inner pane.
Fig. 21
1. Lock the door open:
– Fully open the oven door (fig. 21).
– Fully open the lever A on the left and right hinges (Fig 22).
– Gently close the door (Fig. 23) until the left and right hinges
are hooked to part B of the door (Fig. 22).
A
2. Remove the inner pane:
– Gently pull out the inner pane of glass (Fig. 24).
– Clean the glass with an appropriate cleaner. Dry thoroughly,
and place on a soft surface.
B
Fig. 22
Now you can also clean the inside of the outer glass.
Fig. 23
Fig. 24
Download from Www.Somanuals.com. All Manuals Search And Download.
26
Replacing the Inner Pane of Glass
1. Make sure the door is locked open (see figs. 21, 22, 23).
2. Replace the inner pane:
D
– Check that the four rubber pads are in place (D in Fig. 25).
– Check that you are holding the pane the correct way. You
should be able to read the wording on it as it faces you.
– Insert the pane in the left E and right F slide guides (fig. 26),
and gently slide it to the retainers H (fig. 27).
Fig. 25
– Unlock the oven door by opening it completely and closing
the lever A on the left and right hinges (Fig. 28).
E
F
Fig. 26
H
Fig. 27
A
Fig. 28
Download from Www.Somanuals.com. All Manuals Search And Download.
27
Bottom Oven Door
Note: The oven door should only be removed by an authorised
service agent.
Removal of the oven door by a non-authorised person will
invalidate the guarantee.
Removing the Inner Pane of Glass
When removing and replacing the inner glass, the door
should be held still by one person (fig. 29). A second
person should gently remove the glass (fig. 30).
Fig. 29
To clean the inner pane of the oven door on both sides operate
as follows:
– Open the oven door.
– Gently pull out the inner pane of glass (Fig. 30). Forcible removal
of the door glass may lead to damage of the door hinges.
– Clean the glass with an appropriate cleaner. Dry thoroughly, and
place on a soft surface.
– Now you can also clean the inside of the outer glass.
Do not use harsh abrasive cleaners or sharp metal scrapers
to clean the oven door glass since they scratch the surface,
which may result in shattering of the glass.
Fig. 30
Download from Www.Somanuals.com. All Manuals Search And Download.
28
Replacing the Inner Pane of Glass
To replace the inner pane of the door operate as follows:
– Check that the four rubber pads are in place (D in Fig. 31).
– Check that you are holding the pane the correct way. You should
be able to read the wording on it as it faces you.
– Whilst one person holds the door still, a second person should
insert the inner pane in the left E and right F side guides (fig.
32) and gently let it slide up to the retainers H (fig. 33). Forcible
replacement of the door glass may lead to damage of the door
hinges.
D
D
Fig. 31
EE
FF
Fig. 32
H
H
Fig. 33
Download from Www.Somanuals.com. All Manuals Search And Download.
29
FOR THE INSTALLER
Location
This cooker has class “2/1” overheating protection so that it can be installed next to a
cabinet.
The appliance may be installed in a kitchen, Kitchen/diner or a bed sitting room, but not in a room or space
containing a bath or a shower.
The appliance must not be installed in a bed-sitting room of less than 20 m3.
The appliance is designed and approved for domestic use only and should not be installed in a commercial,
semi commercial or communal environment.
Your product will not be guaranteed if installed in any of the above environments and could affect any
third party or public liability insurances you may have.
The furniture walls adjacent to the cooker must be made of material resistant to heat.
The veneered synthetic material and the glue used must be resistant to a temperature of 90°C in order to
avoid ungluing or deformations.
The cooker must be installed by a qualified technician and in compliance with local safety
standards.
Download from Www.Somanuals.com. All Manuals Search And Download.
30
If the cooker is installed adjacent to furniture which is higher than the gas hob cooktop, a gap of at least
200 mm must be left between the side of the cooker and the furniture.
Curtains must not be fitted immediatly behind appliance or within 500 mm of the sides.
It is essential that the cooker is positioned as stated in Fig. 34.
If the cooker is located on a pedestal it is necessary to provide safety measures to prevent falling out.
Note: please consider the side opening of the bottom door when installing the cooker.
Once installed you should be able to open the oven door.
200 mm
500 mm
Fig. 34
Download from Www.Somanuals.com. All Manuals Search And Download.
31
Before installing the cooker level the appliance by screwing or unscrewing the four adjustable feet fitted
below.
WARNING!
For safety reasons unscrew the feet (from screwed position) to the maximum extent of 5 mm (fig. 35).
0
+ 5 mm
Fig. 35
Backguard
– Remove the two spacers “A” and the screw “B” from the rear of the cooktop.
– Assemble the backguard as shown in figure 36 and fix it by screwing the central screw “B” and the
spacers “A”.
It is mandatory to install the backguard.
B
A
Fig. 36
Download from Www.Somanuals.com. All Manuals Search And Download.
32
Warning
To move the cooker always ensure two people carry out this
manoeuvre to prevent damage to the appliance (fig. 37).
Warning
Be carefull: do not lift the cooker by the door handle (fig. 38).
Warning
When moving cooker to its final position DO NOT DRAG
(fig. 39). Lift feet clear of floor (fig. 37).
Fig. 37
Fig. 38
Fig. 39
Download from Www.Somanuals.com. All Manuals Search And Download.
33
Provision for Ventilation
– The appliance should be installed into a room or space with an air supply in accordance with BS 5440-2:
2000.
– For rooms with a volume of less than 5m3 - permanent ventilation of 100cm2 free area will be
required.
– For rooms with a volume of between 5m3 and 10m3 a permanent ventilation of 50cm2 free area will be
required unless the room has a door which opens directly to the outside air in which case no permanent
ventilation is required.
– For rooms with a volume greater than 10m3 - no permanent ventilation is required.
Note: Regardless of room size, all rooms containing the appliance must have direct access to
the outside air via an openable window or equivalent.
– Where there are other fuel burning appliances in the same room, BS 5440-2: 2000 should be consulted
to determine the correct amount of free area ventilation requirements.
– The above requirements allow also for use of a gas oven and grill but if there are other gas burning
appliances in the same room, consult a qualified engineer.
Download from Www.Somanuals.com. All Manuals Search And Download.
34
Gas Installation
Important Note
This appliance is supplied for use on NATURAL GAS or LPG (check the gas regulation label attached on
the appliance).
– Appliances supplied for use on NATURAL GAS: they are adjusted for this gas only and cannot be used on
any other gas (LPG) without modification. The appliances are manufactured for conversion to LPG.
– Appliances supplied for use on LPG: they are adjusted for this gas only and cannot be used on any
other gas (NATURAL GAS) without modification. The appliances are manufactured for conversion to
NATURAL GAS.
If the NATURAL GAS/LPG conversion kit is not supplied with the appliance this kit can be purchased by
contacting the After-Sales Service.
Installation and Service Regulations (United Kingdom)
It is a legal requirement that all gas appliances are Installed & Serviced by a competent person in accordance
with the current editions of the following Standards & Regulations or those regulations appropriate to the
geographical region in which they are to be installed:
– Gas Safety (Installation & Use) Regulations
– Building Regulations
– British Standards
– Regulations for Electrical Installation
Installation and service of any gas product must be made by a suitably qualified and registered person
competent on the type of product being installed or serviced and holding a valid certificate of competence
for the work being carried out. Currently the proof of competence is the Accredited Certification Scheme
(ACS) or S/NVQ that has been aligned to the ACS.
It is also a requirement that all businesses or self employed installers are members of a class of person
approved by the Health and Safety Executive.
Failure to install the appliance correctly could invalidate any manufacturers warranty and lead to
prosecution under the above quoted regulation.
Download from Www.Somanuals.com. All Manuals Search And Download.
35
Gas Connection
The installation of the gas appliance to Natural Gas or LP Gas must be carried out by a suitably qualified
and registered installer. Installers shall take due account of the provisions of the relevant British Standards
Code of Practice, the Gas Safety Regulations and the Building Standards (Scotland)(Consolidation)
Regulations issued by the Scottish Development Department.
Installation to Natural Gas
Installation to Natural Gas must conform to the Code of Practice, etc.
The supply pressure for Natural Gas is 20 mbar.
The installation must conform to the relevant British Standards.
Installation to LP Gas
When operating on Butane gas a supply pressure of 28-30 mbar is required. When using Propane gas a
supply pressure of 37 mbar is required.
The installation must conform to the relevant British Standards.
Warning: Only a suitably qualified and registered installer, also with technical knowledge of electricity
should install the appliance. He should observe the Regulations and Codes of Practice governing such
installation of gas appliances.
Note: It is recommended that the gas connection to the appliance is installed with a flexible connecting
tube made to BS5386.
Notes:
– Flexible hoses can be used where the sited ambient temperature of the hose does not exceed
70°C. These hoses must be manufactured in accordance with BS669 part 1 and be of the
correct construction for the type of gas being used.
– Gas hoses designed for natural gas MUST NOT be used for supplying LPG gas (LPG gas hoses
can be identified by a either a red band or stripe on the rubber outer coating of the hose).
The hose should not be crushed or trapped or be in contact with sharp or abrasive edges.
Using a suitable leak detection fluid solution (e.g. Rocol) check each gas connection one at a time by
brushing the solution over the connection.
The presence of bubbles will indicate a leak.
If there is a leak, tighten the fitting and then recheck for leaks.
IMPORTANT!
Do not use a naked flame to test for leaks.
Download from Www.Somanuals.com. All Manuals Search And Download.
36
Gas Connection
Cat: II 2H3+
The gas supply must be connected to the gas inlet which is located at the rear of the appliance (see figure
41).
If the connection pipe cross the cooker, it must be positioned under the cooker rear protection.
To screw the connecting tube operate with two spanners (fig. 40).
After connecting to the mains, check that the coupling are correctly sealed, using soapy
solution, but never a flame.
Fig. 40
1/2” BSP (male)
cooker
rear protection
gas pipe
Fig. 41
Download from Www.Somanuals.com. All Manuals Search And Download.
37
Conversion to Natural Gas or to LPG
Injectors Replacement of Top Burners
Every cooker is provided with a set of injectors for the various types of gas.
Injectors not supplied can be obtained from the After-Sales Service.
Select the injectors to be replaced according to the table at page 38.
The nozzle diameters, expressed in hundredths of a millimetre, are marked on the body of each injector.
To replace the injectors proceed as follows:
– Remove the pan supports, the burner caps and flame speaders.
– Using a wrench, substitute the nozzle injectors “J” (Figs. 42 - 43) with those most suitable for the kind
of gas for which it is to be used (see “Table for the choice of the injectors”).
The burners are constructed in such a way so as not to require the regulation of the primary air.
Auxiliary,
Semi-Rapid
and Rapid
burners
Triple Ring
burner
J
J
Fig. 42
Fig. 43
Adjusting of the Minimum of the Top Burners
Considering that in the minimum position the flame must have a
length of about 4 mm and must remain lit even with a quick turn
from the maximum position to that of minimum.
The flame adjustment is done in the following way:
– Turn on the burner
– Turn the tap to the MINIMUM position
– Take off the knob
– With a thin screwdriver turn the screw F until adjustment is
correct (fig. 44).
F
Normally for LPG, tighten up the regulation screw.
Fig. 44
Download from Www.Somanuals.com. All Manuals Search And Download.
38
Table for the Choice of the Injectors
Cat: II 2H3+
G20 - 20 mbar
Burners
Nominal
Power
kW
Reduced
Power
kW
G30 - 28-30 mbar
G31 - 37 mbar
Ø Injector
Ø Injector
1/100 mm
1/100 mm
Auxiliary (A)
Semi-Rapid (SR)
Rapid (R)
1,00
1,75
3,00
3,50
0,30
0,45
0,75
1,50
50
65
85
95
72 (X)
97 (Z)
115 (Y)
135 (T)
Triple Ring (TR)
Increase of Air Necessary for Gas Combustion (2 m3/h x kW)
Burners
Air necessary for combustion (m3/h)
Auxiliary (A)
Semi-Rapid (SR)
Rapid (R)
2,00
3,50
6,00
7,00
Triple Ring (TR)
Lubrication of the Gas Taps
The operations must be executed by a qualified technician.
IMPORTANT: All intervention regarding installation maintenance and conversion of the
appliance must be fulfilled with original factory parts.
The manufacturer declines any liability resulting from the non-compliance of this obligation.
Download from Www.Somanuals.com. All Manuals Search And Download.
39
Electrical Installation
WARNING! Electricity can be extremely dangerous.
This appliance must be earthed.
The appliance must be connected to the electrical network verifying above all that the voltage corresponds
to the value indicated on the specifications plate and that the cables section of the electrical plant can bear
the load which is also indicated on the plate.
It is recommended that the appliance is connected directly to the mains by fixed wiring, placing a double
pole switch with minimum opening between the contacts of 3 mm.
The power supply cable must not touch the hot parts and must be positioned so that it does not exceed
75°C at any point.
Once the cooker has been installed, the switch must always be accessible.
Before effecting any intervention on the electrical parts the appliance must be disconnected
from the network.
Electrical Feeder Cable Connection
To connect the feeder cable to the cooker it is necessary to:
– Remove the 2 screws that hold shield A behind the cooker.
– Open completely the cable clamp D.
230 V
PE
N
L
Earth
Neutral
Live
– Insert the feeder cable into the cable save P. The supply cable
must be of a suitable size for the current requirements of the
appliance; see the section “Feeder cable section”.
– Connect the phase and earth cables to terminal B according to
figures 45 and 46.
L1
N
(L2
PE
)
Fig. 45
– Pull the feeder cable and block it with the cable clamp D.
– Re-mount shield A.
Note: The earth conductor must be left
about 3 cm longer than the others.
B
Feeder Cable Section
Type H05RRF
3 x 2.5 mm2 (*)
A
230 V~
D
(*): Connection with wall box connection
P
Fig. 46
Download from Www.Somanuals.com. All Manuals Search And Download.
40
Connection to Fixed Wiring
A double pole switch must be provided no further than 2 metres from the appliance to the electrical
supply.
The appliance should be connected to a DOUBLE POLE SWITCHED FUSED SPUR OUTLET, similar to
that shown in Fig. 47.
DOUBLE POLE SWITCHED
FUSED SPUR OUTLET
ON
FUSE
Use a suitable FUSE in accordance
with the appliance power rating.
Fig. 47
We recommend that the appliance is connected by a suitably qualified person who will comply with the
IEE and local regulation.
Download from Www.Somanuals.com. All Manuals Search And Download.
41
Appliance Servicing
CDA provide a quality and effective after-sales service to cover all your servicing needs.
Please attach your receipt to this page for safekeeping.
Please help us to help you by having the following information available when booking a service-call:
1. Model type, make and model – see the product data plate.
2. Evidence of installation / purchase date.
3. Retailer where appliance was purchased.
4. Clear and concise details of the fault.
5. Full address including postcode and any contact phone numbers.
Contact telephone numbers
CDA Customer Care Department
– Telephone: 01949 862012
– Fax: 01949 862003
– Email: [email protected]
Download from Www.Somanuals.com. All Manuals Search And Download.
42
Guarantee
CDA appliances carry a five-year parts and a one-year labour guarantee.
CDA will repair or replace any defect or part attributable to faulty material or workmanship. Within the
first year this will be free of both labour and parts charges. After the first year and within five years, the
parts will be supplied free of charge provided that the repair is carried out by an agent authorised by CDA
and the labour will be charged at the commercial rate applicable at the time of repair.
The appliance must have been installed by a suitably qualified person and in accordance with the
manufacturer’s instructions and current legislation. The guarantee does not cover faults caused by the
incorrect fitting of appliances.
Limit of Cover
– The guarantee does not cover cosmetic damage e.g. discolouration or oxidisation.
– Proof of purchase or installation date must be produced before a service-call will be booked.
– The appliance must be used for domestic purposes only. Appliances used for commercial or professional
purposes are not covered by the guarantee. Commercial warranty is available at extra cost.
– The appliance must not be modified or tampered with or repair attempted by any unauthorised
person.
– The guarantee does not cover damage caused in transit or by misuse, accident, abuse or neglect.
– The guarantee does not cover routine maintenance.
– Use of parts not supplied or recommended by |C|D|A| will invalidate the warranty.
– Rubber seals, filters, removable glass parts, control knobs and buttons, fuses and light bulbs will need
replacing periodically and are not covered by the guarantee.
– Second-hand or reconditioned appliances are not covered by the guarantee.
The conditions under which this guarantee is offered are in addition to the statutory rights of the domestic
purchaser and these statutory rights are not affected by this guarantee.
CDA reserve the right to change specification without prior notice.
Download from Www.Somanuals.com. All Manuals Search And Download.
43
Download from Www.Somanuals.com. All Manuals Search And Download.
Cod. 1103507 - ß2
To contact our Customer Care Department, or for Service,
please contact us on the details below.
Customer Care Department • The
Group Ltd. • Harby Road • Langar • Nottinghamshire • NG13 9HY
Download from Www.Somanuals.com. All Manuals Search And Download.
|