Lit#: 91-0027/03-01
®
Natureview
SpottingScope
OBJECTIVE
LENS
POWER CHANGE RING
FOCUS RING
INSTRUCTIONS
EYEPIECE
Model: 78-1645
C O N G R A T U L A T I O N S ,
T E L E P H O T O G R A P H Y :
First remove dust caps from the eyepiece and
objective lens. Then screw the photo adapter
tube on to the spotting scope eyepiece. Thread
the T-mount adapter on to the photo adapter
tube. (See your dealer for the correct T-mount.)
Attach the T-mount adapter to the camera like any
other camera lens, adjust to the desired power
and rotate the focus ring until the image is clear.
You are now ready for telephotography.
You have one of the lightest and most versatile
spotting/field telescopes in the world. The Natureview
has a 60mm. diameter objective lens and has multi-
coated optics for an exceptionally clear and crisp view.
The extra-long eye relief is easier to use, especially for
those who wear glasses or will use the scope for long
periods of time.
F O C U S I N G :
The focusing system is easy and accurate. Rotate
the Focusing Ring, until the image seems to be in
sharp crisp focus. This is all there is to it. There is no
need to overshoot or hunt for the correct focus. Once
the image appears sharp, stop focusing - the image is
in the best focus with minimum eye strain.
M A I N T E N A N C E :
Your Natureview does not require any
maintenance beyond the occasional cleaning.
With a cloth, brush off the outside of the spotting
scope to remove any dirt or dust. You can use a
mild household cleaner - sparingly - to remove
any stubborn dirt. Keep the optics clean; do not
allow dust or water to stay on the outside of the
objective lens, the eyepiece window, or the
eyepiece lenses. Follow the directions with the
kit.
Z O O M E Y E P I E C E
The Natureview comes with a zoom eyepiece which
gives a magnification range of 15-45 power. To change
Magnification, grasp and rotate the Power Change
Ring. The magnification will be indicated on the scale
next to the index dot. It may be necessary to refocus
the spotting scope after changing magnification.
Do not disassemble the spotting scope.
Unauthorized disassembly not only voids the
warranty but may cause damage from the lack of
special tools and techniques.
T R I P O D A T T A C H M E N T :
To attach your Natureview spotting scope to the
tripod, simply tighten the hand attachment screw on
the tripod into the integral Tripod Mount hole on the
base of the scope.
SEE PAGE 2 FOR WARRANTY/REPAIR INFO
Download from Www.Somanuals.com. All Manuals Search And Download.
|